Professional Documents
Culture Documents
HEX
Standard cross-
over pressure WEIGHT LBS | 645
relief system that
is designed to
protect the motor
from pressure
TRULINK TORQUE PIN TruLink 2.0 Class 1
with 7" Display
DT-5 is outfitted to fit these PN | 615070
spikes and
TruLink® Torque Monitor Systems.
potential
overload Kits include Pin, Displays, Anti-Rotation Block,
conditions Mount, Cable and Stylus.
Attached
Manual Holder
for Quick
Access
Highly Efficient
Gearbox designed for
long duty cycles
2 1/2" Hex
Output Shaft
www.pengoattachments.com 800.599.0211
DRIVES
.79
HIGH TORQUE/LOW SPEED OUTPUT
Universal
Long Reach
45MM Pin
LBS | 361
LBS | 7
PN | 661318 End of
PN | 660558
Quick Stick
Coupler
45MM Link Arm 2 1/2" Hex Universal Mount
LBS | 46 Drive Tool LBS | 201 Excavator Mounts allow for
maximum movment to ensure 4.
PN | 660555 LBS | 28 PN | 661111 the Drive always hangs true to
PN | 158132 Custom mounts can be designed for specific applications. the ground.
Pengo lists output speeds at both theoretical and actual. Actual torque numbers are NOT listed at 100% efficiency. Maximum efficiencies have been
applied to the torque and speed charts according to the manufacturer's recommendations. Speed and torque output are dependent on the overall
system efficiencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specific applications please
contact Pengo. Pengo has made every attempt to present accurate and suitable information published in this document. This document should be
used for information and comparative purposes only. When application-specific information is required, please contact Pengo.
www.pengoattachments.com 800.599.0211
DRIVES
HEX
Standard cross-
over pressure WEIGHT LBS | 825
relief system
that is designed
to protect the
motor from TRULINK TORQUE PIN TruLink 2.0 Class 1
with 7" Display
pressure spikes DT-15 is outfitted to fit these
PN | 615070
and potential TruLink® Torque Monitor Systems.
overload Kits include Pin, Displays, Anti-Rotation Block,
conditions Mount, Cable and Stylus.
Attached
Manual Holder
for Quick
Access
Highly Efficient
Gearbox designed for
long duty cycles
3" Hex
Output Shaft
www.pengoattachments.com 800.599.0211
DRIVES
Note
52.06
LOW TORQUE/HIGH SPEED OUTPUT
Pengo lists output speeds at both theoretical and actual. Actual torque numbers are NOT listed at 100% efficiency. Maximum efficiencies have been
applied to the torque and speed charts according to the manufacturer's recommendations. Speed and torque output are dependent on the overall
system efficiencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specific applications please
contact Pengo. Pengo has made every attempt to present accurate and suitable information published in this document. This document should be
used for information and comparative purposes only. When application-specific information is required, please contact Pengo.
www.pengoattachments.com 800.599.0211