Professional Documents
Culture Documents
SERVICE BULLETIN
P&WC S.B. No. 75026
MODEL APPLICATION
PT6E-67XP
Compliance: CATEGORY 3
Summary: This Service Bulletin (SB) is issued to do an inspection of the engine and EEC wiring
harnesses connector backshell at the firewall location. The connection may not be
optimal.
24-Hour Global Service USA & CANADA........................ 1-800-268-8000 Other .......................................... 1-450-647-8000
CFIRST CENTRE International .................... (IAC*)+8000-268-8000 Fax ............................................. 1-450-647-2888
Toll free where available (SIL GEN-027) * International Access Code Web Site .................................. www.pwc.ca
This bulletin contains proprietary information of Pratt & Whitney Canada Corp. (″P&WC″), which
P&WC provides in confidence and solely for the purposes of supporting engine certification and
providing applicable information regarding the proper use, maintenance, inspection, repair, servicing
and parts application of P&WC products and services, as directed therein. Neither this bulletin nor
any information in it may be disclosed to others, or used for any other purpose, including, without
limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product,
material, process, modification, configuration change or repair, or obtain FAA or other government
approval to do so. Possession and use of this bulletin is also subject to the restrictions set out in
P&WC’s Technical Data Agreement (a copy of which may be obtained by contacting P&WC Technical
Publications). The contents of this bulletin may be subject to export control laws. Unauthorized export
or re-export of the bulletin, or parts thereof, is prohibited. By accepting and possessing this bulletin,
you agree to be bound by the foregoing terms.
If a Government agency or department intends to disclose any information, written notice should be
given to:
VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil,
Quebec J4G 1A1.
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
1. Planning Information
A. Effectivity
PT6E-67XP (BS1369) Engines which are before and include Serial No. PCE-HP0101,
and including HP0108, HP0109, HP0110, HP0123 and HP0125.
B. Concurrent Requirements
None.
C. Reason
(1) Problem
The engine or EEC wiring harnesses connectors at firewall location may not make
appropriate contact with firewall connection.
(2) Cause
The engine or EEC wiring harnesses connection at firewall may not be optimal.
(3) Solution
D. Description
The function of this inspection is limited to the following four firewall connectors and
associated harnesses (Ref. Fig. 1):
1. EEC Harness P/N 3135057-01, Connectors J7F and J8F
2. Engine Harness P/N 3135056-01, Connectors P7F and P8F
NOTE: This inspection can be done while the harnesses are still mounted on the
aircraft firewall.
E. Compliance
F. Approval
The technical content of this document is approved under the authority of the Transport
Canada Civil Aviation (TCCA) Design Approval Organization No: DAO #93-Q-01.
P&WC No. EC-0064659
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
© 2021 Pratt & Whitney Canada Corp. Page 1 of 11
PRINTED IN CANADA
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
G. Manpower
Once you have access to the part, an estimate of 3.0 man-hours is required to include
this service bulletin at repair.
None.
Not applicable.
Not applicable.
K. References
L. Publications Affected
Not applicable.
Not applicable.
2. Material Information
Not applicable.
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 2 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
Not applicable.
D. Reidentified Parts
None.
Not Applicable
3. Accomplishment Instructions
A. Do an inspection of the four firewall connectors and associated harnesses (Ref Figure
1):
NOTE: This inspection is done while the harness are still mounted on the aircraft
firewall.
(1) Access forward lower accessory bay door per AMM (Ref. Fig. 2).
(2) Locate J7F and J8F connectors at rear aircraft firewall (Ref. Fig. 1).
(a) For each connector, put your thumb and forefinger on to the backshell of
connector, next to but not on the coupling ring (Ref. Fig. 3).
(b) Try to rotate the backshell, like an unscrew movement in both directions,
clockwise and counterclockwise.
NOTE: 1. Do not shake up and down the wiring harness to do the inspection.
NOTE: 2. When doing the inspection, grip backshell to try to rotate the
connector and do not grip the harness.
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 3 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
J7F CONNECTOR
P7F CONNECTOR ENGINE HARNESS
P/N 3135056−01
LEFT SIDE OF THE FIREWALL RIGHT SIDE OF THE FIREWALL
ICN-00198-G000097695-001-01
EEC HARNESS (RIGHT SIDE) AND ENGINE HARNESS (LEFT SIDE) AND FOUR CONNECTORS
(J7F, J8F AND P7F, P8F)
Figure 1
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 4 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
(4) If any rotational movement or looseness is felt, replace the harness per EMM:
v Ref. Removal PT6E67-0A-73-20-05-00A-520A-A.
v Ref. Installation PT6E67-0A-73-20-05-00A-720A-A.
(1) Access Aft engine bay left side door per AMM (Ref. Fig. 2).
(2) Remove starter/gen1 and 2 air cooling ducts to gain access to engine harness
connectors at aft aircraft firewall per AMM (Ref. Fig. 4).
NOTE: Unscrew all attached clamps and remove whole Gen 1 and Gen 2 air
cooling duct assembled (Ref. Fig. 4).
(3) Remove cable tie and bolt/nut on blanket on aft firewall to access engine harness
connectors per AMM (Ref. Fig. 5).
(4) Locate P7F and P8F connectors at aft aircraft firewall (Ref. Fig. 1).
(5) For each connector, put your thumb and forefinger on to the backshell of connector,
next to but not on the coupling ring (Ref. Fig. 3).
(a) Try to rotate the backshell, like an unscrew movement in both directions,
clockwise and counterclockwise.
NOTE: 1. Do not shake up and down the wiring harness to do the inspection.
NOTE: 2. When doing the inspection, grip backshell to try to rotate the
connector and do not grip the harness.
(6) If no play is felt, the backshell and connector are serviceable. Go to Step 8.
(7) If any rotational movement or looseness is felt, replace the harness per EMM:
v Ref. Removal - PT6E67-0A-73-20-02-00A-520A-A.
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 5 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
(8) Install cable tie and bolt/nut on blanket on aft firewall to access engine harness
connectors per AMM
(9) Install starter/gen1 and 2 air cooling ducts to gain access to engine harness
connectors at aft aircraft firewall per AMM (Ref Fig. 4).
NOTE: Screw back all attached clamps and install whole Gen 1 and Gen 2 air
cooling duct assembled per AMM (Ref. Fig. 4).
(10) Close Aft engine bay left side door per AMM (Ref. Fig. 2).
(11) Record the accomplishment of P&WC SB No. 75026, in the engine module log
book.
4. Appendix
Not applicable.
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 6 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
FORWARD LOWER
ACCESSORY DOOR
ICN-00198-G000097698-001-01
AIRCRAFT AFT ENGINE BAY LEFT SIDE DOOR AND FORWARD LOWER ACCESSORY DOOR
Figure 2
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 7 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
COUPLING RING
BACKSHELL
BACKSHELL
ICN-00198-G000097701-001-01
CONNECTORS BACKSHELL AND COUPLING RING
Figure 3 (Sheet 1 of 2)
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 8 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
BACKSHELL
ICN-00198-G000097702-001-01
CONNECTORS BACKSHELL AND COUPLING RING
Figure 3 (Sheet 2)
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 9 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
ICN-00198-G000097703-001-01
AIRCRAFT AFT ENGINE BAY LEFT SIDE DOOR VIEW AND STARTER/GEN 1 & 2 AIR
COOLING DUCTS
Figure 4
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 10 of 11
SERVICE BULLETIN
P&WC S.B. No. 75026
TURBOPROP ENGINE
ENGINE AND EEC WIRING HARNESSES - INSPECTION OF
CABLE TIE TO
BE REMOVED
ICN-00198-G000097704-001-01
AIRCRAFT INSULATION BLANKET CABLE TIE AND BOLT/NUT
Figure 5
Dec 21/2021 P&WC Proprietary Information. Subject to the restrictions on the back of the locator PT6E-72-75026
Page 11 of 11