Professional Documents
Culture Documents
reviewer3@nptel.iitm.ac.in ▼
Unit 6 - Week
5
Course
outline
Week 5 Assignment 5
The due date for submitting this assignment has passed.
How to access As per our records you have not submitted this Due on 2018-09-12, 23:59 IST.
the portal assignment.
Lecture 27
a. Dissolved salts and ions
Week 6 a. 1 minute
b. 5 minutes
Week 7
Funded by
4) Primary treatment
Poweredofby
water is meant for 1 point
Week 11
5) The tube and plate settlers compared with conventional sedimentation tank, generally 1 point
require
6) The settling velocity of a spherical particle in still water is given by: 1 point
a. Lacey’s formula
b. Darcy’s law
d. Stoke’s law
7) The screens typically provided before primary treatment in a sewage treatment plant are: 1 point
a. Fine Screen
b. Course Screen
c. Micro Screne
8) Surface loading for a rectangular sedimentation tank with length L, width B and height H, 1 point
having design discharge of Q, is represented by:
Q
a.
BH
Q
b.
BL
Q
c.
LH
Q
d.
LBH
9) The ratio of the design discharge to the surface area of a sedimentation tank is known as 1 point
its:
a. Surface loading
b. Overflow velocity
c. Overflow rate
d. All of these
10)Which of the following types of settling phenomenon can be analysed by the classic 1 point
sedimentation laws of Newton and Stokes?
a. Discrete settling
b. Flocculent settling
c. Hindered settling
d. Compression settling
a. Discrete Settling
b. Floculant Settling
c. Zone Settling
d. Compression Settling
12)A typical screen will have higher capture efficiency if it is kept: 1 point
d. Orientation is immaterial
14)For a grit chamber, if the recommended flow velocity is 0.25 m/sec, and the detention 1 point
period is 1 minute, then the length if the tank is:
a. 15 m
b. 25 m
c. 240 m
15)The terminal settling velocity of a 0.05 mm dia spherical particle with specific gravity 2.4, in 1 point
water of density 1000 kg/m3 and dynamic viscosity 0.00113: Ns/m2 , would be:
a. 0.0482 m/s
b. 0.0265 m/s
c. 0.0120 m/s
d. 0.0017 m/s
16)The minimum size of the particulate matter of specific gravity 2.0 that will get removed by 0 points
a ideal settling chamber of 10m length and 1.5 m height, of the viscosity 1.7 x 10−5 kg/m sec and
horizontal velocity into the chamber is 0.3 m/sec, will be:
a. 5.2 µm
b. 52 µm
c. 520 µm
d. 52 mm
Accepted Answers:
b. 52 µm
17)A grit chamber of dimensions 12.0m x 1.50m x 0.80 m liquid depth has flow of 720 m3 /hr. 1 point
Its surface loading rate is
a. 40,000 m3 /hr/m2
b. 4000m3 /hr/m2
c. 400 m3 /hr/m2
d. 40 m3 /hr/m2
18)The velocity through a bar rack when the approach velocity is 0.60 m/s and the measured 1 point
head loss is 38 mm, would be:
a. 0.94 m/s
b. 2.28 m/s
c. 0.63 m/s
d. 1.56 m/s
19)At a sewage treatment plant for a flow of 3m3 /s, the surface loading rate is 0.3m3 /s/m2 . 1 point
The cross-sectional area of the grit chamber will be:
a. 3m2
b. 10m2
c. 25m2
d. 30m2
20)The settling basin at a wastewater treatment plant having a flow rate of 0.6 m3 /sec has an 1 point
effective settling volume that is 20 m long, 3 m tall and 6 m wide. What percent of the particles that
have a settling velocity of 0.004 m/sec will be removed?:
a. 100 %
b. 80 %
c. 70 %
d. 60 %