Professional Documents
Culture Documents
016 018 020 022 024 064 065 066 069 071
TSII SA TSII CA TSIII SA TSIII CA TSIII BA ZioCera Temporary Quick Multi Multi
Fixture Fixture Fixture Fixture Fixture Angled Abutment Temporary Abutment Angled
Abutment Abutment Abutment
026 028 030 032 032 073 075 075 075 076
TSIII HA TSIV SA TSIV CA Simple Cover Convertible Convertible Convertible Convertible Convertible
Fixture Fixture Fixture Mount Screw Abutment Combination Angled GoldCast Temporary
Cylinder Cylinder Cylinder Cylinder
033 034 037 040 040 076 077 077 078 078
Healing Custom Rigid Rigid Rigid Convertible Convertible Convertible Convertible Convertible
Abutment Healing Abutment Protect Retraction Plastic Pick-up Transfer Protect Lab
Abutment Cap Cap Cylinder Impression Impression Cap Analog
Coping Coping
040 041 041 042 044 078 081 082 082 082
Rigid Rigid Rigid Transfer Laboratory Convertible Stud O-ring O-ring O-ring
Impression Burn-out Lab Abutment Screw Polishing Abutment Retainer Retainer Set
Coping Cylinder Analog Protector Cap Set Set
044 045 046 047 049 082 083 084 084 084
Fixture Bite Fixture Fixture Angled O-ring Locator Locator Locator Locator
Lab Index Pick-up Transfer Abutment Lab Abutment Male Replacement Extended
Analog Impression Impression Analog Processing Male Replacement
Coping Coping Kit Male
052 054 055 057 057 085 085 085 085 086
FreeForm GoldCast NP-Cast SmartFit Scan Locator Locator Locator Locator Locator
ST Abutment Abutment Abutment Boby Black Block Out Impression Lab Analog Core Tool
Abutment Processing Spacers Coping
Male
TS SYSTEM
D
016 017
�Submerged type implant with an internal hex and 11�tapered connection D Ø 5.0 L 6 7 8.5 10 11.5 13
�Super-hydrophilic SA surface suspended in a calcium solution
�Straight body design allows easy insertion depth adjustments
Hex 2.5
�Excellent initial stability in soft bone due to small threads in the upper section
Short
�Corkscrew threading with excellent self-threading effect
Ultra-wide
�Ideal for an extracted tooth site in the posterior area, for immediate placement,
or for replacing a failed implant TS2S5006C TS2S5007C TS2S5008C TS2S5010C TS2S5011C TS2S5013C
�Apex is specifically design for excellent initial stability in an extracted tooth site
Hex 1.2
�Recommended insertion torque: ≤40 Ncm
※ Fixtures with a diameter of 4.5mm or more are recommended for the posterior
area.
L
NoMount fixture order code
: fixture product code (ex : TS2S4010C)
Pre-Mounted fixture (fixture + mount + cover screw) order code
TS SYSTEM
TS SYSTEM
: B + fixture product code (ex : BTS2S4010S)
D
Ultra-Wide
018 019
D Ø 6.0 L 6 7 8.5 10 11.5 13
D Ø 3.5 L 8.5 10 11.5 13
Hex 2.5
Hex 2.1
Short
TS SYSTEM
TS3S5004S TS3S5005S TS3S5006S TS3S5007S TS3S5008S TS3S5010S TS3S5011S TS3S5013S
Hex 2.1
TS3S6006S TS3S6007S TS3S6008S TS3S6010S TS3S6011S TS3S6013S
Extra
short
Nominal and actual diameters may slightly differ.
Caution : For a short implant, a sufficient healing period is strongly recommended. A short implant should be splinted with another implant
TS3S4006S TS3S4007S TS3S4008S TS3S4010S TS3S4011S TS3S4013S when considering prosthetic options.
TSIII CA Fixture
TS SYSTEM
TS3S5004C TS3S5005C TS3S5006C TS3S5007C TS3S5008C TS3S5010C TS3S5011C TS3S5013C
NoMount fixture order code
: fixture product code (ex : TS3S4010C)
Pre-Mounted fixture (fixture + mount + cover screw) order code D Ø 5.5 L 6 7 8.5 10 11.5 13
: B + fixture product code (ex : BTS3S4010C) D
Hex 2.5
022 023
Short
Extra
short
Nominal and actual diameters may slightly differ.
Caution : For a short implant, a sufficient healing period is strongly recommended. A short implant should be splinted with another implant
TS3S4006C TS3S4007C TS3S4008C TS3S4010C TS3S4011C TS3S4013C when considering prosthetic options.
TSIII BA Fixture
TS SYSTEM
D
024 025
TS3S4507B TS3S4508B TS3S4510B TS3S4511B TS3S4513B Nominal and actual diameters may slightly differ.
TSIII HA Fixture
TS SYSTEM
D
026 027
�Submerged type implant with an internal hex and 11�tapered connection Ultra-wide
�Optimized screw thread design with the ideal SA surface
�Designed specifically for the maxillary sinus and soft bone
�Excellent initial stability in soft bone due to the small thread on the upper D Ø 6.0 L 7 8.5 10 11.5 13
part Hex 2.5
�Corkscrew threading with excellent self-threading effect
�Aggressive apex design allows placement even in a ∅2.0 or ∅3.0mm
osteotomy in D4 bone
Ultra-wide
�Ideal for an extracted tooth site in the posterior area, for immediate
TS4S6007S TS4S6008S TS4S6010S TS4S6011S TS4S6013S
placement, or for replacing a failed implant
�Apex is specifically design for excellent initial stability in an extracted tooth site Hex 1.2
�Recommended insertion torque: ≤40 Ncm
※ Fixtures with a diameter of 4.5mm or more are recommended for the
D Ø 7.0 L 7 8.5 10 11.5 13
posterior area.
※ It is recommended to reduce the insertion speed to 15RPM or lower, Hex 2.5
L
the TSIV fixture has aggressive threads and insert very quickly.
TS SYSTEM
: fixture product code (ex : TS4S4010S)
Pre-Mounted fixture (fixture + mount + cover screw) order code TS4S7007S TS4S7008S TS4S7010S TS4S7011S TS4S7013S
: B + fixture product code (ex : BTS4S4010S)
D
028 029
TS4S5007S TS4S5008S TS4S5010S TS4S5011S TS4S5013S Nominal and actual diameters may slightly differ.
TSIV CA Fixture
Ultra-wide
�Submerged type implant with an internal hex and 11�tapered connection
�Super-hydrophilic SA surface suspended in a calcium solution D Ø 6.0 L 7 8.5 10 11.5 13
�Designed specifically for the maxillary sinus and soft bone
�Excellent initial stability in soft bone due to the small thread on the upper part
Hex 2.5
�Corkscrew threading with excellent self-threading effect
�Aggressive apex design allows placement even in a ∅2.0 or ∅3.0mm
osteotomy in D4 bone
Ultra-wide
�Ideal for an extracted tooth site in the posterior area, for immediate TS4S6007C TS4S6008C TS4S6010C TS4S6011C TS4S6013C
placement, or for replacing a failed implant L
�Apex is specifically design for excellent initial stability in an extracted tooth site
�Recommended insertion torque: ≤40 Ncm
※ Fixtures with a diameter of 4.5mm or more are recommended for the
D Ø 7.0 L 7 8.5 10 11.5 13
posterior area. Hex 2.5
※ It is recommended to reduce the insertion speed to 15RPM or lower, the
TSIV fixture has aggressive threads and insert very quickly.
D
TS SYSTEM
TS SYSTEM
NoMount fixture order code
: fixture product code (ex : TS4S4010C) TS4S7007C TS4S7008C TS4S7010C TS4S7011C TS4S7013C
030 031
TS4S5007C TS4S5008C TS4S5010C TS4S5011C TS4S5013C Nominal and actual diameters may slightly differ.
Mount & Screw Healing Abutment
�Use a 1.2 hex driver �Yellow (Mini) color coded prosthetic parts are for ∅3.5 and ∅3.0 fixtures
�Recommended tightening torque: 8 to 10Ncm �Use a 1.2 hex driver (torque manually)
�Packing unit: mount + mount screw
※ Disposable; re-use is not allowed
�C = Connection
D
For Ø 3.0
TSSM30
Matching table H
Abutment G/H 1.0 2.0 or 3.0 3.0 or 4.0 5.0 이상 Fixture level
TS SYSTEM
TSHAMM
032 033
TSHAMR
H
Fixture level
7.0
TS SYSTEM
034 035
Ti screw
: GSCHABSMT TSCHAPM5 TSCHAPM7 TSCHAPM9
Ti screw
: GSCHABSST
TSCHAPR5 TSCHAPR7 TSCHAPR9
PROSTHETIC FLOW DIAGRAM 1
Rigid Abutment
Rigid / Transfer
Abutment Level Impression
Single Bridge
D
Rigid Burn-out Cylinder
TS SYSTEM
Rigid Impression Coping
040p
036 037
040p 040p M
M
M
M
M
032p 033 p
1.2 Hex Driver
D Ø 4.0 H G/H 1.0 2.0 3.0 4.0 5.0 D Ø 7.0 H G/H 1.0 2.0 3.0 4.0 5.0
4.0 GSRAS4410 GSRAS4420 GSRAS4430 GSRAS4440 GSRAS4450 5.5 GSRA7610 GSRA7620 GSRA7630 GSRA7640 GSRA7650
TS SYSTEM
038 4.0 GSRAS4411 GSRAS4421 GSRAS4431 GSRAS4441 GSRAS4451 039
5.5 GSRAS4611 GSRAS4621 GSRAS4631 GSRAS4641 GSRAS4651
7.0 GSRAS4711 GSRAS4721 GSRAS4731 GSRAS4741 GSRAS4751
Rigid Protect Cap D H 4.0 5.5 7.0 Rigid Burn-out Cylinder D Type Single Bridge
�Protects the rigid abutment and �Used after casting, clean the margin
minimizes patient irritation for proper fitting
�Can be used as the base for a
provisional crown
Ø 4.0/ Ø 4.0 GSRPC440 GSRPC460 GSRPC470
�Available for transfer abutment Ø 4.0/ Ø 4.0 GSRP400S GSRP400B
(except for the ∅4.0) Ø 4.5/ Ø 4.5 GSRPC441 GSRPC461 GSRPC471
Ø 4.5/ Ø 4.5 GSRP450S GSRP450B
Ø 5.0 GSRPC540 GSRPC560 GSRPC570
Ø 5.0 GSRP500S GSRP500B
Ø 6.0 GSRPC640 GSRPC660 GSRPC670
Ø 6.0 GSRP600S GSRP600B
Ø 7.0 - GSRPC760 -
Ø 7.0 GSRP700S GSRP700B
TS SYSTEM
TS SYSTEM
Rigid Retraction Cap D H 4.0 5.5 7.0 Rigid Lab Analog D H 4.0 5.5 7.0
040 041
�Used for accurate margin reproduction �Connect to the appropriate color coded
when taking a direct impression rigid impression coping
�Can be used as the base for a
provisional crown
Ø 4.0 / Ø 4.0 GSRRC440 GSRRC460 GSRRC470
�Available for transfer abutment (except
for the ∅4.0)
Ø 4.5/ Ø 4.5 GSRRC441 GSRRC461 GSRRC471
Ø 4.0/ Ø 4.0 GSRLA440 GSRLA460 GSRLA470
Ø 5.0 GSRRC540 GSRRC560 GSRRC570
Ø 4.5/ Ø 4.5 GSRLA441 GSRLA461 GSRLA471
Ø 6.0 GSRRC640 GSRRC660 GSRRC670
Ø 5.0 GSRLA540 GSRLA560 GSRLA570
Ø 7.0 - GSRRC760 -
Ø 6.0 GSRLA640 GSRLA660 GSRLA670
Ø 7.0 - GSRLA760 -
�Cement/combination-retained prosthesis D
EbonyGold screw
�Fixture level impression : GSABSS
�Abutment level impression is available using the rigid impression
coping (except the ∅4.0) Hex
5.5 GSTAS4611 GSTAS4621 GSTAS4631 GSTAS4641 GSTAS4651
H
�Use a 1.2 hex driver 7.0 GSTAS4711 GSTAS4721 GSTAS4731 GSTAS4741 GSTAS4751
�Recommended tightening torque: 20Ncm (mini), 30Ncm (regular)
5.5 GSTAS4611N GSTAS4621N GSTAS4631N GSTAS4641N GSTAS4651N
�Packing unit : abutment + EbonyGold screw Non-Hex
7.0 GSTAS4711N GSTAS4721N GSTAS4731N GSTAS4741N GSTAS4751N
G/H EbonyGold
screw
Fixture level
D Ø 5.0 H G/H 1.0 2.0 3.0 4.0 5.0
TS SYSTEM
EbonyGold screw
: GSABSS
EbonyGold screw
: GSABSM
D Ø 6.0 H G/H 1.0 2.0 3.0 4.0 5.0
Abutment level
impression not Hex
5.5 GSTA4612 GSTA4622 GSTA4632 GSTA4642 GSTA4652
possible
7.0 GSTA4712 GSTA4722 GSTA4732 GSTA4742 GSTA4752
EbonyGold screw
5.5 GSTA4612N GSTA4622N GSTA4632N GSTA4642N GSTA4652N : GSABSS
Non-Hex
7.0 GSTA4712N GSTA4722N GSTA4732N GSTA4742N GSTA4752N
4.0 GSTA6410 GSTA6420 GSTA6430 GSTA6440 GSTA6450
Hex 5.5 GSTA6610 GSTA6620 GSTA6630 GSTA6640 GSTA6650
7.0 GSTA6710 GSTA6720 GSTA6730 GSTA6740 GSTA6750
Hex
5.5 GSTA4611 GSTA4621 GSTA4631 GSTA4641 GSTA4651 EbonyGold screw
7.0 GSTA4711 GSTA4721 GSTA4731 GSTA4741 GSTA4751 : GSABSS
5.5 GSTA4611N GSTA4621N GSTA4631N GSTA4641N GSTA4651N Hex 5.5 GSTA7610 GSTA7620 GSTA7630 GSTA7640 GSTA7650
Non-Hex
7.0 GSTA4711N GSTA4721N GSTA4731N GSTA4741N GSTA4751N Non-Hex 5.5 GSTA7610N GSTA7620N GSTA7630N GSTA7640N GSTA7650N
Transfer Abutment Components
GSABSML GSABSMW
TS SYSTEM
GSABSSL GSABSSW
For Ø 3.0
GSTLA300
GSTLA350
GSTLA400
Transfer Abutment Components
(Silver) (Yellow)
(Silver)
Guide Pin
D L 11 0 5.0 9.0
Type Hex Non-Hex
D L 11 14
Type Hex Non-Hex Hex Non-Hex
TS SYSTEM
TS SYSTEM
Ø 4.0 GSPIM4011 GSPIM4011N
046 GSPGPM100 GSPGPM150* GSPGPM150L 047
Ø 4.5 GSPIM4511 GSPIM4511N
17� D
�Cement/combination-retained prosthesis
EbonyGold Screw
�Angle compensation up to 23�without the need
042p for trimming
�Fixture level impression 8
�Use a 1.2 hex driver
�Recommended tightening torque: 20Ncm (mini),
EbonyGold
30Ncm (regular) G/H screw
�Packing unit : abutment + EbonyGold screw Fixture
level
TS SYSTEM
048 049
Fixture Lab Analog
EbonyGold screw
: GSABSM
Fixture Pick-up Impression Coping Fixture Transfer Impression Coping Bite Index
EbonyGold screw
: GSABSS
TS SYSTEM
D Ø 5.0 G/H 2.0 4.0
Type Hex A Hex B Non-Hex Hex A Hex B Non-Hex
EbonyGold screw
: GSABSS
TS SYSTEM
Type Hex Non-Hex Hex Non-Hex
EbonyGold screw
: GSABSS
052 053
GSFA5015 GSFA5015N GSFA5030 GSFA5030N
D D
TS SYSTEM
054 055
TS SYSTEM
056 057
Fixture Lab Analog
044p
Scan Boby
�Component used to scan the position of the implant
to design the SMARTFIT custom abutment.
�Color coded screws
Hex Non-hex Hex Non-hex �Use a 1.2 hex driver (torque manually) Yellow color screw
Fixture Pick-up Impression Coping Fixture Transfer Impression Coping Bite Index �Packing unit : scan body + Ti screw : TSSBSM
�Cement/combination/screw-retained prosthesis
�Titanium base for CAD/CAM designed and milled Zirconia
custom abutment
�Use Osstem's official Implant Library
�Fixture level impression D
�Use a 1.2 hex driver
�Recommended tightening torque: 20Ncm (mini),
30Ncm (regular) H
�Packing unit : abutment + EbonyGold screw + scan body EbonyGold
screw
Abutment + EbonyGold screw + scan body Fixture level
G/H
order code
: product code + WH (ex : TSPTB431RWH)
TS SYSTEM
TS SYSTEM
058 059
EbonyGold screw
: GSABSM
Hex
3.0 TSPTB431M TSPTB432M
5.0 TSPTB451M TSPTB452M
EbonyGold screw
: GSABSS
Hex
3.0 TSPTB431R TSPTB432R
5.0 TSPTB451R TSPTB452R
Scan Post
�Special post used to scan the position of the implant where
�Cement/combination/screw-retained prosthesis space is limited (i.e. thick soft tissue, deeply inserted fixture).
D
�Titanium base for CERECTM CAD/CAM designed and �Connect scan body before scanning
milled Zirconia custom abutment �Use a 1.2 hex driver (toruqe manually) Yellow anodizing screw
�Use a 1.2 hex driver �Packing unit : scan post + Ti screw : GSABSML
�Recommended tightening torque: 20Ncm (mini),
30Ncm (regular) Scan body + Screw order code TSCSPM
EbonyGold : product code + TH (ex : TSCSPRTH)
Abutment + EbonyGold screw + scan body screw
order code Fixture level
G/H
: product code + WH (ex : TSCTBRWH)
TS SYSTEM
: GSABSSL
TSCSPR
060 061
�Cement/combination/screw-retained prosthesis
�Zirconium abutment for an all ceramic prostheses ideal EbonyGold screw
: GSASR
for anterior - esthetic zone. 7
�Fixture level impression
�Use a 1.2 hex driver
�Abutment screw included GSZAS5535 GSZAS5535N GSZAS5550 GSZAS5550N
�Recommended tightening torque: 20Ncm (mini),
30Ncm (regular)
G/H
�Packing unit : abutment + EbonyGold screw EbonyGold
screw
Abutment + EbonyGold screw order code Fixture level
: product code + WH (ex : GSZAS5535NWH)
TS SYSTEM
TS SYSTEM
D Ø 6.5 G/H 3.5 5.0
Type Hex Non-Hex Hex Non-Hex
EbonyGold screw
: GSASR
17� D
�Cement/combination/screw-retained prosthesis
�Zirconium abutment for an all ceramic prostheses ideal for
anterior - esthetic zone.
�Angle compensation up to 23�without the need for �Cement/screw-retained prosthesis
9
additional adjustment �A trim able provisional prosthesis (made of Ti Gr-3)
�Fixture level impression �Fixture level impression 10
�Use a 1.2 hex driver �Use a 1.2 hex driver
�Abutment screw included �Recommended tightening torque: 20Ncm (mini/regular)
�Recommended tightening torque: 20Ncm (mini), 30Ncm �Packing unit : abutment + Ti screw
(regular) G/H EbonyGold
�Packing unit : abutment + EbonyGold screw Abutment + Ti screw order code
screw G/H
: product code + TH (ex : GSTTA4510TH) Ti screw
Fixture level
Abutment + EbonyGold screw order code Fixture level
: product code + WH (ex : GS17ZAS5530NWH)
D
TS SYSTEM
TS SYSTEM
064 065
D Ø 5.5 G/H 3.0 D Ø 6.5 G/H 4.0 D Ø 4.0 G/H 1.0 3.0
Type Hex Non-Hex Type Hex Non-Hex Type Hex Non-Hex Hex Non-Hex
Ti screw
: GSABSST
Ti screw
�Cement/screw-retained prosthesis : GSABSST
7
�A provisional prostheses for immediate loading
�Prep able and resin friendly
�Use a 1.2 hex driver
�Recommended tightening torque: 20Ncm (mini/regular)
�Packing unit : abutment + Ti screw
TSQTA4515R TSQTA4515RN TSQTA4550R TSQTA4550RN
G/H
Abutment + Ti screw order code
: product code + TH (ex : TSQTA5550TH) Ti screw
Fixture level
TS SYSTEM
TS SYSTEM
D Ø 5.5 G/H 1.5 5.0
Type Hex Non-Hex Hex Non-Hex
066 Ti screw
067
: GSABSST
- - TSQTA5550 TSQTA5550N
Ti screw
: GSABSMT
Ti screw
: GSABSMT
TSQTA4550 TSQTA4550N
- -
PROSTHETIC FLOW DIAGRAM 4
Multi Abutment
Multi / Multi Angled
Abutment Level Impression
Ti Screw
271p
D
�Screw-retained prosthesis for multiple prosthetic options
�Same platform as the multi angled abutment
�Restorative Components: US Esthetic Low Cylinder (regular/non-hex)
�Torque using Multi Abutment Outer Driver (code: MAOD)
G/H
Hex Non-hex Hex Non-hex Hex Non-hex
�Recommended tightening torque: 30Ncm (mini/regular)
Esthetic-low Esthetic-low Esthetic-low �Packing unit : abutment + carrier
Fixture level
Temporary Cylinder Gold Cylinder Plastic Cylinder
Abutment + carrier order code
223p 222p 222p : product code + P (ex : TSMA5030P)
TS SYSTEM
TS SYSTEM
225p 224p
Esthetic-low Esthetic-low
Polishing Protector Lab Analog
068 069
Cover Screw Healing Abutment D Ø 4.8 G/H 1.0 2.0 3.0 4.0 5.0
032p 033 p
1.2 Hex Driver
TS SYSTEM
D Ø 4.8 Angle G/H 2.5 3.0 4.0
MAMD
EbonyGold screw
: GSMABSS
EbonyGold Screw
075p
�Screw-retained prosthesis in multiple scenarios
�Angle compensation up to 60�
�Torque using Convertible Abutment Outer Driver
D
- ∅4.0: Torque using o-ring abutment driver (code: AORD)
- ∅5.0 and ∅6.0: Torque using octa abutment driver
(code: ODSL/ODSS)
Convertible Convertible Convertible Convertible Convertible �Recommended tightening torque: 30Ncm (mini/regular)
Combination Cylinder Angled Cylinder GoldCast Cylinder Temporary Cylinder Plastic Cylinder G/H
�Packing unit : abutment + carrier
075p 075p 075p 076p 076p Fixture level
TS SYSTEM
Convertible Lab Analog
078p
072 073
032p 033 p
1.2 Hex Driver
D Ø 5.0 G/H 1.0 2.0 3.0 4.0 5.0 Convertible Combination Cylinder D H 7.0
Type Hex Non-Hex Octa
�Combination-retained prostheses possible
�Use a 1.2 hex driver
�Recommended tightening torque: 20Ncm
�Packing unit : cylinder + EbonyGold cylinder screw
Ø 4.0/ Ø 4.0 GSCC4070T GSCC4070TN -
GSCA5010 GSCA5020 GSCA5030 GSCA5040 GSCA5050
Abutment + EbonyGold screw order code
Ø 5.0 - - GSCC5070T
: product code + WH (ex : GSCC5070TWH)
Ø 6.0 - - GSCC6070T
EbonyGold screw
: GSFSM (Ø 4.0 / Ø 4.0)
: GSFSR (Ø 5.0 / Ø 6.0)
TS SYSTEM
TS SYSTEM
D Ø 6.0 G/H 1.0 2.0 3.0 4.0 5.0 Convertible Angled Cylinder D H 8.0
Type Hex Non-Hex Octa
�Combination-retained prosthesis possible
�Angle compensation up to 17�
074 �Use a 1.2 hex driver 075
�Recommended tightening torque: 20Ncm
GSCA6010 GSCA6020 GSCA6030 GSCA6040 GSCA6050 �Packing unit : cylinder + EbonyGold cylinder screw Ø 4.0/ Ø 4.0 GSAC4080T GSAC4080TN -
Ø 5.0 - - GSAC5080T
Abutment + EbonyGold screw order code
: product code + WH (ex : GSAC5080TWH) Ø 6.0 - - GSAC6080T
EbonyGold screw
: GSFSM (Ø 4.0 / Ø 4.0)
: GSFSR (Ø 5.0 / Ø 6.0)
Ø 6.0 - - GSCTC600T
EbonyGold screw Guide Pin
: GSFSMT (Ø 4.0 / Ø 4.0) D 0 5.0
: GSFSRT (Ø 5.0 / Ø 6.0)
TS SYSTEM
TS SYSTEM
Ø 4.0/ Ø 4.0 GSPIC400 (Hex / Yellow) GSCGP400S GSCGP400L*
Convertible Plastic Cylinder D H 12
076 Type Hex Non-Hex Octa Ø 5.0 GSPIC500 (Octa / Silver)
GSCGP500S GSCGP500L* 077
�Screw-retained prosthesis Ø 6.0 GSPIC600 (Octa / Blue)
�Customized prosthesis cast with non-precious alloys
�Use a 1.2 hex driver
�Recommended tightening torque: 20Ncm
�Packing unit : cylinder + EbonyGold cylinder screw
Ø 6.0 - - GSCPL600
EbonyGold screw
: GSFSM (Ø 4.0 / Ø 4.0)
Convertible Transfer Impression D
: GSFSR (Ø 5.0 / Ø 6.0) Coping
�Transfer impression coping
�Use a 1.2 hex driver (torque manually)
�Packing unit : impression coping body + guide pin
�Protective cap
�Use a 1.2 hex driver (fastened manually)
�Packing unit : protect cap + EbonyGold screw
Ø 4.0/ Ø 4.0 GSCHC400 (Hex) - -
Abutment + EbonyGold screw order code -
Ø 5.0 - GSCHC500 (Non-Octa) -
: product code + WH (ex : GSCHC500WH)
Ø 6.0 - GSCHC600 (Non-Octa)
EbonyGold screw
: GSFSM (Ø 4.0 / Ø 4.0)
: GSFSR (Ø 5.0 / Ø 6.0)
TS SYSTEM
TS SYSTEM
078 Convertible Lab Analog D 079
�A lab analog
�Use a 1.2 hex driver (fastened manually)
082p 082p
085p
TS SYSTEM
TS SYSTEM
O-ring System
080 081
085p
O-ring Lab Analog
D Ø 3.5 G/H 1.0 2.0 3.0 4.0 5.0 6.0
082p Locator Impression Coping
O-ring Abutment Driver Stud Abutment Locator Abutment Locator Torque Driver
086p
032p 033 p
1.2 Hex Driver
TS SYSTEM
�Used when vertical dimension is shorter than the
retainer cap
�Packing unit : retainer cap + o-ring
RS01
082 083
O-ring Set
�O-ring set HGLCA3510M HGLCA3520M HGLCA3530M HGLCA3540M HGLCA3550M
�Packing unit : o-ring x 5ea
OAON01S
OAL
Locator Abutment Components
TS SYSTEM
abutments. Position denture cap with integrated black
processing onto the LOCATOR abutments. If necessary add
Locator Replacement Male
additional block-out spacers until no gap is visible between LBSS
�Retention force: approx. 6N female, block-out spacer and gum.
�Angle compensation up to 20� �Packing unit : 20ea
084 �Packing unit : 4ea LRM06S
085
TS SYSTEM
D Ø 4.6 Angle G/H 4.0 5.0
EbonyGold screw
: GSMABSS
PTAAH450P
TS SYSTEM
TS SYSTEM
088 089
Osstem Implant Key References
Clinic
No. Title Reference / Author
1 Retrospective clinical study of new tapered design implants Oral Biology Research. 2013; 37(2):105-111
/ Young-Kyun Kim et al.
16 Evaluation of sinus bone resorption and marginal bone loss after Oral Surg Oral Med Oral Pathol Oral Radiol
Endod. 2009;107:e21-8
in maxillary posterior areas sinus bone grafting and implant placement
/ Young-Kyun Kim et al.
2 A randomized controlled clinical trial of two types of tapered implants Int J Oral Maxillofac Implants.
2013 Nov-Dec;28(6):1602-11 (IF 1.908)
17 Evaluation of peri-implant tissue response according to the Oral Surg Oral Med Oral Pathol OralRadiol
Endod. 2009;107:e24-8
on immediate loading in the posterior maxilla and mandible presence of keratinized mucosa
/ Young-Kyun Kim et al. / Young-Kyun Kim et al.
3 Bony window repositioning without using a barrier membrane Int J Oral Maxillofac Implants.
2012 27:211-217
18 Study on radiographic evaluation of marginal bone loss around J Kor Oral Maxillofac Surg. 2009;35:240-7
/ Young - Deok, Chee
in the lateral approach for maxillary sinus bone grafts: osseonintegrated implant after functional loading
clinical and radiologic results at 6 months. / Chang-Joo Park et al.
4 A relaxed implant bed: implants placed after two weeks of J Oral Implantol. 2012 Apr;38(2):155-64
/ Bansal J et al.
19 Four-year survival rate of RBM surface internal connection non- J Korean Assoc Maxillofac Plast Reconstr
Surg. 2009;31(3):237-42
osteotomy with immediate loading: a one year clinical trial. submerged implants and the change of the peri-implant crestal bone
/ Sok-Min Ko et al.
REFERENCE
REFERENCE
5 A multicenter prospective study in type IV bone of a single Implant Dent. 2012 Aug;21(4):330-34
/ Su-Gwan Kim et al.
type of implant
6 Comparison of clinical outcomes of sinus bone graft with simultaneous Oral Surg Oral Med Oral Pathol Oral Radiol Biology
implant placement: 4-month and 6-month final prosthetic loading Endod. 2011 Feb;111(2):164-9
090 / Young-Kyun Kim et al. No. Title Reference / Author 091
7 Prospective study of tapered resorbable blasting media surface Oral Surg Oral Med Oral Pathol Oral Radiol
1 Experiment study of bone response to hydroxyapatite coating Oral Surg Oral Med Oral Pathol Oral Radiol.
2012 Jun 29. [Epub ahead of print]
implant stability in the maxillary posterior area Endod. 2012 Feb 28. [Epub ahead of print] implants : bone-implant contact and removal torque test
/ Young-Kyun Kim et al. / Young-Kyun Kim et al.
8 A 1-year prospective clinical study of soft tissue conditions and marginal Oral Surg Oral Med Oral Pathol Oral Radiol
2 Experimental study about the bony healing of hydroxyapatite J Kor Oral Maxillofac Surg.
2011;27(4):295-300
bone changes around dental implants after flapless implant surgery Endod. 2011 Jan;111(1):41-6 coating implants
/ Byung-Ho Choi et al. / Young-Kyun Kim et al.
9 Evaluation of peri-implant tissue in nonsubmerged dentalImplants: Clin Implant Dent Relat Res.
3 The use of autologous venous blood for maxillary sinus floor Clin. Oral Impl. Res. 2010;21:346-9
/ Byung-Ho Choi et al.
a multicenter retrospective study 2011 Dec;13(4):324-9 augmentation in conjunction with sinus membrane elevation: an
/ Young-Kyun Kim et al. experimental study
10 A relaxed implant bed: implants placed after two weeks of osteotomy J Oral Implantol. 2012 Apr;38(2):155-64
/ Bansal J et al.
4 Effects of soft tissue punch size on the healing of peri-Implant Oral Surg Oral Med Oral Pathol Oral Radiol
Endod. 2010;109:525-30
with immediate loading: a one year clinical trial tissue in flapless implant surgery
/ Byung-Ho Choi et al.
11 A comparison of implant stability quotients measured using Clin. Oral Impl. Res. 2010;21(6):591-7
/ Jong-Ho Lee et al.
5 Morphogenesis of the peri-implant mucosa: a comparison between Oral Surg Oral Med Oral Pathol Oral Radiol
Endod. 2009;107:66-70
magnetic resonance frequency analysis from two directions: flap and flapless procedures in the canine mandible
prospective clinical study during the initial healing period / Byung-Ho Choi et al.
12 A short-term clinical study of marginal bone level change around J Periodontal Implant Sci. 2011;41:211-217 6 A comparative study of two noninvasive techniques to evaluate Oral Surg Oral Med Oral Pathol Oral Radiol
Endod. 2009;107:513-8
microthreaded and platform-switched implants / Kyoo-Sung Cho et al. implant stability: periotest and osstell mentor
/ Su-Gwan Kim et al.
13 A randomized clinical one-year trial comparing two types of Clin. Oral Impl. Res. 2010;21(2):228-36
/ Jong-Ho Lee et al.
7 Influence of abutment connections and plaque control on the initial J Periodontol. 2008;79(6):1070-4
/ Byung-Ho Choi et al.
nonsubmerged dental implant healing of prematurely exposed implants: an experimental study in dogs
14 Short-term, multi-center prospective clinical study of short implants J Kor Dent Sci. 2010;3(1):11-6
/ Young-Kyun Kim et al.
8 Er:YAG laser irradiated implant surface observation with scanning J Korean Assoc Maxillofac Plast Reconstr
measuring less than 7mm electron microscopy Surg. 2008;30(6):540-5
/ Seung-Ki Min et al.
15 Evaluation of peri-implant tissue in nonsubmerged dentalImplants: Oral Surg Oral Med Oral Pathol Oral Radiol
9 The effect of surface treatment of the cervical area of implant on J Kor Oral Maxillofac Surg. 2008;34:285-92
/ Hong-Ju Park et al.
a multicenter retrospective study Endod. 2009;108(2):189-95 bone regeneration in mini-pig
/ Young-Kyun Kim et al.
User Manual 2013.02 ver.4.0 Disposable, re-use prohibited, medical appliance
thoroughly evaluate the patient's condition and recognized the following issues:
10 Histologic and histomorphometric evaluation of early and J Biomed Mater Res A. 2008;86:1122-7
/ Su-Gwan Kim et al.
Osstem Implant product information
1) bone loss due to peri-implantitis, 2) changes to the dental implant condition,
immediately loaded implants in the dog mandible Osstem Implant’s dental fixtures and products are manufactured using medical
3) proper osseointegration determined by a x-ray examination. If there is movement
grade Titanium. Osstem Implant’s abutments, denture material and surgical tools are
or if there is bone loss more than 50%, removing the dental implant should be a
only compatible with Osstem fixtures. For more details about any individual product,
course of action. Wide diameter implants should be performed as a two stage
please refer to the user manual or catalog, or visit our company website
11 Effects of different depths of gap on healing of surgically created J Periodontol. 2008;79(2):355-61
/ June-Sung Shim et al.
(www.osstem.com). Please check all product labels for product codes, surgery. Sufficient healing time must be given before splinting with other implants or
when loading. Immediate loading is not recommended.
coronal defects around implants in dogs: a pilot study specifications, date of manufacture and expiration date.
Sterility Take care when placing dental implants with HA coating. The coating is prone to
cracking or fracturing under high torque, therefore hard bone should be avoided and
12 Comparative study of removal effect on artificial plaque from RBM J Korean Assoc Maxillofac Plast Reconstr
Surg. 2007;29(4):309-20
Fixtures, cover screws and healing abutments are cleansed and gamma-sterilized.
These products are disposable sterile medical appliances, and must be used in a sterile
be inserted under 35Ncm of force.
treated implant field. If the package is damaged or has expired, it must not be used. If the product
/ Hee-Jyun Oh et al. package has been opened but not used, there is a risk of contamination and it is not
CA and SOSI treated dental implants are encased in a solution to prevent the chemically
recommended that the product resterilized and therefore should be discarded. treated surface from reacting with air. After removing the CA or SOSI dental implant,
place the implant within 15 minutes to avoid degradation of the surface.
Storage conditions
Warning
Store all products in a dry place at room temperature (30oC). Avoid direct sunlight.
Improper patient selection and treatment planning may result in dental implant failure
General precautions or loss of bone. Osstem Implants must not be used for purpose other than
Biomechanics prescribed and must not be altered in any shape or form. Implant movement, bone
Dental implant surgery requires proper and formal training and education.
loss, and chronic infections can result in implant failure.
No. Title Reference / Author
USER MANUAL
Cautions before dental surgery Indications
REFERENCE
Before dental implant surgery, a thorough patient health history review, and oral
1 Evaluation of the correlation between insertion torque and J Periodontal Implant Sci. 2013;43:41-46
/ Ki-Tae Koo et al. radiographic examinations must be completed to determine bone quality and proper
Osstem Implant Systems are designed to replace a patient's tooth or teeth. They can
primary stabilityof dental implants using a block bone test treatment planning.
be placed in both the maxillary and submaxillary alveolar bones and after full
osseointegration can be restored prosthetically. Osstem Implant Systems offer both
temporary and final prosthesis and can be retained by cement, screw, overdenture
Cautions during dental implant surgery or fixed bridge.
2 Self-cutting blades and their influence on primary stability of Oral Surg Oral Med Oral Pathol Oral Radiol
Endod. 2011;112:573-580
Osstem Implant Systems are for single or two stage dental implant procedures. In
Side effects
tapered dental implants in a simulated low-density bone model: order to minimize damage to the patient's tissue, special attention to temperature,
092 a laboratory study / Young-Jun Lim et al. surgical lesions and eliminating all sources of contamination and infection are
needed. Any deviation from the standard surgical protocol increases the risk of
There are possible side effects after implant surgery (lost of implant stability, damage 093
to dentures). These issues can be caused by the lack of bone or poor bone quality,
failure. When inserting the dental implant, sufficient cooling must be introduced
3 Variation in the total lengths of abutment/implant assemblies generated Clin. Oral Impl. Res. 2011;22:834-9
/ Ki-Seong Kim et al.
(water or saline) and excessive torque (greater than 55Ncm) can result in dental
an infection, patient's poor oral hygiene, non compliance with post op procedures,
movement of the implant, degradation of surrounding tissue, or improper placement
with a function of applied tightening torque in external and internal implant fracture or possibly bone necrosis. Placing dental implants greater than 300 of the dental implant.
implant-abutment connection has a very high risk of implant fracture. Direct pressure to the fixture should be
avoided right after surgery. Immediate or delayed loading of the fixture must be Contraindications
4 Effect of impression coping and implant angulation on the accuracy J Adv Prosthodont. 2010;2(4):128-33
/ Seung-Geun Ahn et al.
determined after proper examination of the patient's bone condition and initial
stability after placement.
Patients with the following contraindications are not eligible for dental implants:
of implant impressions: an in vitro study - Patients with blood clotting issues or issues with wound healing.
- Diabetic patients
"Mini" implants or implants with a diameter less than 4.0mm are not recommended
- Patients that smoke or drink excessively
for the posterior region.
- Patient's with compromised immune systems due disease or chemo and radiation
5 Influence of implant diameter and length changes on initial stability J Kor Acad Prosthodont. 2009;47:335-41
/ Chang-Mo Jeong et al. Ultra-wide dental implants are recommended for the posterior region but should not
therapy.
- Patients with an oral infection or inflammation (improper oral hygiene or teeth
be used with angled abutments. If considering an Ultra-wide dental implant, proper grinding)
radiographic evaluation must be made to determine the bone mass and potential - Patients with an incurable malocclusion/arthropathia and insufficient arch space.
anatomical restrictions. Short dental implants (diameter greater than 5mm and
6 Mechanical strength of zirconia abutment in implant restoration J KASFO. 2009;25(4):349-60
/ Young-Chan Jeon et al.
shorter than 7mm) are only used for the posterior region. The clinician must
7 Heat transfer to the implant-bone interface during preparation of Int J Oral Maxillofac Implants.
2009;24(4):679-83
zirconia/alumina complex abutment
/ Yong-Geun Choi et al.
8 Fatigue fracture of different dental Implant system under cyclic loading J Kor Acad Prosthodont.
2009;47(4):424-34
/ In-Ho Cho et al.
9 Effect of tightening torque on abutment-fixture joint stability using J Kor Acad Prosthodont.
2009;47(2):125-35
3-dimensional finite element analysis
/ Chang-Mo Jeong et al.
10 The effect of various thread designs on the initial stability of taper J Adv. Prosthodont. 2009;1:19-25
/ Young-Jun Lim et al.
implants