Professional Documents
Culture Documents
Vatrostalni Materijali - Katalog
Vatrostalni Materijali - Katalog
MATERIJALI MATERIALS
TA N P R O
TE IZ
LI
VO
A
KV
25
GODINA SA VAMA
O NAMA
Preduzeće Orvis d.o.o. Zenica utemeljeno je 1992. godine, poslovno aktivno od 1993.
Preduzeće se za vrlo kratko vrijeme profiliralo kao pouzdan i kvalitetan proizvođać vatros-
talnih materijala za industriju i kućanstvo i materijala za završne radove u građevinarstvu.
Poslovnom odlukom 1997. godine započeta je realizacija projekta izgradnje postrojenja za
proizvodnju građevinskih i vatrostalnih materijala.
Od 1997. godine do danas preduzeće je uz stalna poboljšanja razvilo čitavu paletu proizvo-
da namijenjenih građevinarstvu i vatrostalstvu koji čine robne marke ORBET i ORMAL – od
temeljnih premaza,preko vatrostalnih betona, maltera i gitova za vatrostalnu industriju do
završnih slojeva za fasadne radove i industrijske podove (ferobetone) u građevinarstvu.
Kvalitetni i stručni ljudi, visoka razina znanja, tehnološka rješenja, fleksibilnost prema
potrebama kupaca predstavljaju osnovne prednosti naše kompanije. Naše vrijednosti su i
inovativnost, praćenje trendova u razvoju novih materijala, želja za usavršavanjem,
poduzetnost, odgovornost, timski rad i visoka profesionalnost.
Uz visoku kvalitetu naših proizvoda najvećim svojim uspjehom smatramo lojalnost naših
kupaca. Vjerujemo da je ona rezultat našeg razumijevanja njihovih konkretnih potre-
ba, visoke kvalitete proizvoda, povoljnih cijena i uvjeta poslovne suradnje te uspješnog
prilagođavanja zahtjevima tržišta.
Brojni kupci prepoznali su nas kao poželjnog partnera i poklonili nam svoje povjerenje. U
našem poduzeću poslujemo prema načelima održivog razvoja. Racionalnim korištenjem
prirodnih resursa i komponenti koje se koriste u proizvodnji proizvodimo najmanju moguću
količinu otpada čime doprinosimo zaštiti okoliša.
Company Orvis Ltd. In Zenica, was founded in 1992 and is active in business since 1993.
In very short period the company established itself as a reliable and quality contractor in
fields of building and refractory materials.
Business decision in 1997 started the project of building the plant for production of
building and refractory materials
Since 1997 the company has with continuous improvements developed an entire range of
products for construction and refractory that make brands Orbet and Ormal - from
primers, via refractory concrete, plaster and putty for fireproof industry to final layers of
facade work and industrial flooring (ferroconcrete) in the construction industry.
Major qualities of our company are quality, highly trained experts, knowledge and
expertise, technological solutions, flexibility for demands of our customers. Our quality
also lays in innovation, following trends in new material development, desire for
improvement, enterprise, responsibility, team work and professionalism.
Beside the high quality of our products, our greatest success is the loyalty of our
customers.
We believe that it is a result of our understanding of their specific needs, high quality
products, good prices and business cooperation conditions, as well as successful adjusting
to market demands.
Orvis ltd. is characterized by social responsibility and involvement in life processes, not
only of our employees but of the entire community. We listen attentively and support the
needs of our community.
REFERENC LISTA / REFERENCE LIST
ORBET – 7E 3
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
4 ORBET – 7
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
ORBET – 10 5
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
6 ORBET NC – 10
Niskocementni vatrostalni beton za salivanje- Low cement castable refractory
TERMOTORKRET T-5 7
Vatrostalni beton za torkretiranje – Refractory concrete for gunning
8 TERMOTORKRET T-7E
Vatrostalni beton za torkretiranje - Refractory concrete for gunning
10 TERMOTORKRET T-9 E
Vatrostalni beton za torketiranje - Refractory concrete for gunning
11
ORBET IZO 1.2
Vatrostalni beton za torkretiranje – Refractory concrete for gunning
12 ORBET IZO 0.6
Vatrostalni beton za torketiranje - Refractory concrete for gunning
ORMAL ŠM-0 13
Šamotni malter-Chamotte mortar
14 ORMAL VA
Visoko aluminatni malter- Highly aluminous mortar
15
ORMAL SIM
Silikatni malter- Silicate mortar
16 ORMAL ŠB
Šamotno brašno- Chamotte flour
O MLJEVENIM VATROSTALNIM MATERIJALIMA
Mljeveni vatrostalni proizvodi nalaze sve širu primjenu u raznim toplotnim agregatima. U mljevene vatrostalne
proizvode spadaju sve vrste neoblikovanih (zrnastih i praškastih) proizvoda koji se isporučuju u suhom, polu-suhom
i vlažnom stanju.
Savremena tehnička rješenja toplotnih postrojenja zahtjevaju upotrebu mljevenih vatrostalnih proizvoda zbog raz-
nih prednosti, koji ovi proizvodi imaju u odnosu na oblikovane vatrostalne proizvode-opeke.
Prednosti mljevenih proizvoda kod ozida termičkih agregata je veoma široka i raznovrsna : u crnoj i obojenoj metal-
urgiji, livnicama, kotlogradnji, industriji građevinskog materijala, u industriji cementa i kreča, hemijskoj industriji itd.
Orvis d.o.o. Zenica kao vodeći proizvođač alumosiliktanog vatrostalnog materijala u zemlji usvaja nove kvalitete
mljevenih vatrostalnih proizvoda zbog sve većeg zahtjeva u inteziviranju rada agregata i tehnoloških linija.
Proizvodno tehnološka aktivnost „ORVISA“ se ne završava prodajmo finalnih proizvoda, koji su prethodno provjereni
u laboratorijama opremljenim za ispitivanje svih parametara koji se garantuju katalogom proizvoda.
Pored proizvoda navedenih u katalogu, „ORVIS“ može proizvoditi i druge proizvode iz oblasti vatrostalstva po
posebnim zahtjevima kupaca - kako standardnih, tako i najkomplikovanijih vatrostalnih masa, betona i vatrostalnih
ploča.
Nema segmenta u kome „ORVIS“ nije obavljao poslove iz svoje specijalnosti. Nabrojat ćemo samo neke sektore:
termoenergetika, crna i obojena metalurgija, industrija građevinskih materijala, hemijska industrija, petrohemija,
livnice itd.
Grinded fire-resistant materials are increasingly used in various thermal units. They include all kinds of unformed
(granular and powdered) products delivered in dry, semi-dry and wet condition.
A modern technical solutions require the use of the grinded fire-resistant materials due to various advantages that
these products have compared to the formed fire-resistant materials – bricks.
Advantages of the grinded fire-resistant materials in the masonry of thermal aggregates are very wide and diverse
in: ferrous and nonferrous metallurgy, foundries, boiler construction, construction material industry, the cement
industry and lime, chemical industry, etc.
Orvis d.o.o. Zenica, as the leading producer of aluminosilicate fire-resistant materials in the country, adopts new
qualities of the grinded fire-resistant materials beacuse of the increased demands in intensifying the work of aggre-
gates and technological lines.
Production and technological activity of “Orvis” ends with the sale of finished products, which were previously test-
ed in laboratories equipped for testing of all parameters which are listed in a product catalog.
In addition to the products listed in the catalog, “Orvis” can produce and other products in the field of fire-resistant
materials according to the special requirements of customers - both standard and the
most complicated fire-resistant materials, concrete and fire-resistant panels.
There is no segment in which “ORVIS” did not performed the duties of its specialties.
The following are just a few sectors: thermal energy, black and non-ferrous metallurgy,
building materials industry, chemical industry, petrochemical industry, foundries, etc.
TEHNIČKI LIST / TECHNICAL DATA SHEET
ORBET – 4
Vatrostalni beton za livenje – High quality castable refractory concrete
Al2O3 51,0 %
SiO2 40,0 %
CaO 5,0 %
Fe2O3 4,0 %
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORBET – 5
Vatrostalni beton za livenje – High quality castable refractory concrete
Al2O3 51,0%
SiO2 40,0 %
CaO 5,0%
Fe2O3 4,0%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORBET – 7E
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
Al2O3 65,0%
SiO2 30,0 %
CaO 3,0 %
Fe2O3 1,3 %
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORBET – 7
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
Al2O3 65,0%
SiO2 25,0 %
CaO 6,0%
Fe2O3 1,3%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORBET – 10
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
Al2O3 80,0%
SiO2 16,0 %
CaO 3,8 %
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORBET NC – 10
Visoko kvalitetni vatrostalni beton – High quality refractory concrete
Al2O3 52,0%
SiO2 42,0 %
CaO 1,8%
Fe2O3 1,0%
Fizičke osobine/ Physical performance
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
TERMOTORKRET T-5
Vatrostalni beton za torkretiranje - Refractory concrete for gunning
Al2O3 51,0%
SiO2 37,0 %
CaO 5,0%
Fe2O3 4,0%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
TERMOTORKRET T-7E
Vatrostalni beton za torkretiranje - Refractory concrete for gunning
Al2O3 58,0%
SiO2 30,0 %
CaO 4,70%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
Al2O3 42,0%
SiO2 20,0 %
CaO 9,10%
Fe2O3 1,0%
SiC 25,00%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
TERMOTORKRET T-9E
Vatrostalni beton za torkretiranje - Refractory concrete for gunning
Al2O3 70,0%
SiO2 20,0 %
CaO 4,70%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
Tip proizvoda / Type of product Izolacioni vatrostalni beton/ Refractory insulating castable
Al2O3 35,0%
SiO2 45,0 %
CaO 8,50%
Fe2O3 3,10%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
Tip proizvoda / Type of product Izolacioni vatrostalni beton/ Refractory insulating castable
Al2O3 30,0%
SiO2 55,0 %
CaO 8,50%
Fe2O3 3,10%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORMAL ŠM-0
Šamotni malter-Chamotte mortar
Al2O3 40,0%
SiO2 45,0 %
CaO 8,50%
Fe2O3 3,10%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORMAL VA
Visoko aluminatni malter- Highly aluminous mortar
Al2O3 72,0%
SiO2 16,0 %
CaO 8,0%
Fe2O3 3,10%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORMAL SIM
Silikatni malter- Silicate mortar
Al2O3 72,0%
SiO2 25,0 %
Na2C03 1,00%
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
ORMAL ŠB
Šamotno brašno- Chamotte flour
Vatrostalnost/ Refractoriness
Zapreminska masa/ Required material
Početna temperatura očvršćavanja/ Initial
temperature solidification
Note: All products are tested at the Metallurgical Institute “Kemal Kapetanovic” Zenica
Napomena: Svi proizvodi su atestirani na Metalurškom Institutu „Kemal Kapetanović“ Zenica
Vatrostalni betoni zamješani sa vodom brzo očvršćavaju što ih čini pogodnim za izradu i održavanje vatrostalne
obloge različitih toplotnih agregata. Miješanje betona, uz vlaženje vrši se u mješalicama ili ručno.
Dovoljno je intenzivno mješanje betona u trajanju od cca 5 minuta.
Količina dodate vode za betone koji se ugrađuju vibriranjem iznosi 7-10% tj 7-10 L na 100 kg suhog betona.
Visoko aluminatnim betonima dodaju se manji procenti vode.
Preporučuje se da se vatrostalni beton ugrađuje na temperaturama 5-30 ⁰C
DIJAGRAM SUŠENJA
VATROSTALNOG BETONA
INSTRUCTIONS
For installation, heating and tamping refractory concrete
Refractory concrete mixed with water quickly becomes harden which makes it suitable for production and main-
tenance of the refractory lining of various heat generators. Mixing concrete, with humidification, is performed in
a mixer or by hand. It is enough to intensively mix concrete for a period of approximately 5 minutes.
The amount of water added to the concrete to be installed by vibrating is 7-10% and 7-10 L per 100 kg of dry
concrete. For high alumina concrete smaller percentages of water is added.
1. Newly-installed lining of refractory concrete is naturally dried and tied for 24 hours.
2. After 24 hours remove the lining and heat it to make 200 ⁰C with a speed of 10 ⁰C / h which takes
about 18 hours.
3. Keep the lining at 200 ⁰C approximately 10 hours untill the whole water evaporates from the
lining. The end of the evaporation of water vapor can be visually observed.
4. After completion of the evaporation of water vapor the heat the lining to the operating tempera
ture of the boiler with a speed of 30 ⁰C / h.
5. After reaching the operating temperature of the boiler the lining is ready for a prescribed regi
men of firing and the maximum load of the boiler.
6. By following the above instructions and normal exploitation of the boiler a guarantee is given for a
created lining of 24 months from the date of handover of the works on the boiler.
With the guidance we provide you a chart of refractory lining drying made out of refractory cement.
CHART OF REFRACTORY
LINING DRYING
25
GODINA SA VAMA
P
. 1 U RODAJ
BR
I
BEST SELLER
VA
TR A
OST JAL
ALNIH MATERI
+387 32 421 307 Sarajevska 249 orviszenica@gmail.com
+387 61 695 148 Bosna i Hercegovina www.orvis.ba
+387 32 420 509 72000 Zenica