Professional Documents
Culture Documents
Semi vortex impeller design provides non clog operation, suitable Specifications
for waste water applications that contain soft or fibrous solids:- ˜ Submersible pump with semi vortex impeller.
˜ Maximum solids handling: refer to table
Septic effluent, textile & woollen mills, ˜ Maximum liquid temperature: 40 °C
food processing plants, dairy & piggery ˜ Maximum submergence: 0.4 -1.5 kW - 4 m
2.2 -3.7 kW - 8 m
washdown, etc. Materials
˜ Pump casing: Cast Iron
˜ Impeller: Cast Iron
˜ Shaft: 403 Stainless Steel
˜ Motor frame: Cast Iron
˜ Fasteners: 304 Stainless Steel
˜ Mechanical seal: Double mechanical seal in oil chamber,
Silicon Carbide lower faces,
Carbon/Ceramic upper faces.
Motor Data
˜ Air filled, dry submersible, 2 pole, 50 Hz
˜ Insulation class F
Automatic Manual ˜ IP68 protection
version version ˜ 3 Phase - 400 Volt, 1 Phase - 230 Volt
˜ In built overload protection
Range
˜ 50 to 80 mm Ø discharge
˜ 0.4 to 0.75 kW - 1 Phase
Impeller Type &
˜ 0.75 to 3.7 kW - 3 Phase
˜ Manual or automatic versions available (all sizes)
Solids Handling
Semi-Vortex Supply
Ø 50 80 80 ˜ Cable: 6 m (0.4 to 1.5 kW), 10 m (2.2 & 3.7 kW)
Model ˜ Screwed Companion flange (50 mm models)
kW All 0.75,1.5 2.2, 3.7
Foreign matter ˜ Discharge elbow with screwed companion flange
Diameter (mm) 32 45 56 (80 mm models)
Length of 150- 200- 245-
Fibre (mm) 250 320 350 Accessories
˜ Quick Discharge Connectors (QDC) available
Performance 30
Curve
20 80 D
Synchronous 50 DVS
DVSA 51.5 DV VS
Speed: SA 53
3000 rpm 15 .7
80
50 DVS D
DV VS
Total Head - m
of test : 10
DV SA
9
V
S 5
7
80 DV
6
DV SA
S 5.
Model Code
5
50 DVS 5.4 S
75
811
219
876 Float
Switches
Control
Device
Float
048 50 mm Pole
830 For
models
Automatic
Versions
B
B
DD 15
Level for
Starting
80 mm Submersible cable
Length CL
50 mm models Automatic
models Versions
L2
K
PT2
80
Hm
Note: L.W.L.
Hm
level.
F
Data Sheet
EBARA PUMPS AUSTRALIA PTY. LTD.
DVS 13-03