Professional Documents
Culture Documents
2 0 1 9
© PRÜFTECHNIK; All rights reserved
Printed in Germany
DOC 04.700.EN
Posts 24
CENTRALIGN Ultra is an universal and high-precision laser measuring system for different geometrical meas-
urement tasks in the industry sector.
Features
more…
Order information
ALI 4.061 CENTRALIGN Ultra RS5 BT, Add-on for ROTALIGN Ultra iS
Scope of delivery
CONTENT Variant
ALI 17.452 USB pen drive with AC GEO software and device doc-
umentation
Optional accessories
LBB - Large Bore Bracket (Measuring fixture for measurement of large diameters)
ALI 3.400 LBB rotation frame, set Contains the main components of p. 18
the LBB measuring fixture and is
the basis for all versions.
Misc. Telescopic arms and extension posts, Allows setup of the measuring fix- p. 18
sets ture across a large range (0.5 ...
4.2 m)
ALI 3.115-C Mounting components for Tops-on con- Enables mounting with closed meas- p. 18
figuration urement object (Tops-on)
ALI 3.115-O Mounting components for Tops-off con- If the top part of the machine can p. 18
figuration be removed for the alignment meas-
urement (Tops-off), this mounting
option offers high flexibility in axial
direction.
Note: For more information about brackets, refer to the corresponding accessory catalog.
Keyboard elements Navigation cross with Back, Delete, and Menu buttons;
Alphanumerical keyboard with function keys for dimensions, measuring, results
sensALIGN 5 sensor
BT MODULE
Type External module for sensor supply and wireless communication via Bluetooth, class 1
LED displays 1 LED for wireless communication, 3 LEDs for battery status
Operating time Typically 14 hours (assuming an operating cycle of 50 % measurement and 50 % standby)
Dimensions approx. 81 x 41 x 34 mm
sensALIGN 5 laser
Shockproof
Relative humidity: 10% to 90%
This bracket is used to measure alignment and roundness of concentric components, such as bearing channels or cyl-
inder bores. It is suitable for bores made of magnetic as well as non-magnetic material.
Features
Order information
ALI 2.760 SET UPB extension set for diameters up to 810 mm, magnetic and non-magnetic
Overview
ALI 2.177 Post 70 mm 2
ALI 3.889 Case 1
Overview,
without case
Magnetic,
D: 120...400 mm
The UPB can be placed in the bore or on the front face. Strong The measuring probe is lowered onto
magnets secure the UPB; two sliding studs provide additional the surface and moves the sensor
support for the measuring fixture when mounted outside of the into measuring position.
bore.
Magnetic,
D: < 810 mm
Additional components extend the area of application of the The measuring probe and sensor
UPB to bores with larger diameter. bracket are stabilized using addi-
tional components.
Non-magnetic,
D: < 810 mm
In the case of non-magnetic surfaces, the UPB is mechanically The UPB is mechanically secured on
secured in the bore using the universal mounting bridge and the front face of the bore. The sliding
the mounting bridge with eccentric head. studs on the eccentric head and the
universal mounting bridge are used
as pads.
10
Spare parts
With this power device you can supply the computer with mains power (e.g. in the office) or charge the built-in
rechargeable battery.
Features
l Protection class II
l Five replaceable plug adapters for various world
regions:
l North America, Japan
l Australia
l UK
l EU
l China
Order information
ALI 12.651-I AC power supply / battery charger, Inter- OPTALIGN smart RS5 BT
national, 12V
ROTALIGN smart RS5 EX
CENTRALIGN Ultra
ALI 50.651 AC power supply / battery charger, Inter- ROTALIGN touch, OPTALIGN touch, VIBSCANNER 2
national, 12V
TECHNICAL INFORMATION
Technical Data
Env. protection II / IP 52
Dimensions approx. 43 x 74 x 35 mm
The following section provides detailed information about the components and the optional accessories.
Posts 24
This mounting bridge can be diversely used for bore measurements. It is light-weight, consists of a few individual
components only and can be quickly mounted using magnetic clamping feet. The universal mounting bridge can be
used as laser/sensor holder or as measuring fixture for large half-shells.
Features
Order information
In addition, optional accessories and/or individual components are available as spare part:
Optional accessories
TECHNICAL INFORMATION
Application Universal mounting bridge
Bracket for long The mounting components are included in the scope
range laser of delivery of the laser.
The CENTRALIGN mounting bridge is used as holder for the laser and control sensor during turbine measurements.
It can be easily adjusted to the diameters and mounting bores on the turbine shell.
Features
Order information
ALI 3.241-075 SET CENTRALIGN mounting bridge, nominal width 750 mm One mounting bridge (ALI 3.231-075) in
case
ALI 3.241-100 SET CENTRALIGN mounting bridge, nominal width 1000 One mounting bridge (ALI 3.231-100) in
mm case
ALI 3.242-075 SET CENTRALIGN mounting bridge, nominal width 750 mm Two mounting bridges (ALI 3.231-075) in
case
ALI 3.242-100 SET CENTRALIGN mounting bridge, nominal width 1000 Two mounting bridges (ALI 3.231-100) in
mm case
ALI 3.231-200 CENTRALIGN mounting bridge, nominal width 2000 One mounting bridge without case
mm
Measurement of tur-
bines (tops-off)
Dimensions in mm / [inch"]
ALI 3.231-100 1000 [39 3/8"] 460 [18 1/8"] 1740 [68 1/2"]
ALI 3.231-200 2000 [78 3/4"] 1460 [57 1/2"] 2740 [107 7/8"]
The LBB measuring fixture is used to measure alignment and roundness of concentric components, such as guide
vane carriers or diaphragms in a turbine. The LBB measuring fixture features a modular design and can be adjusted
continuously across a wide range.
Features
Order information
The LBB measuring fixture consists of three main components: measuring head, telescopic arms and mounting
options.
Main components 1 to 3
Typical setup
ALI 3.116-SS LBB telescopic arms, short (3x), range: 545 mm to 900 mm
ALI 3.116-SM LBB telescopic arms, short (3x) and medium (4x), range: 545 mm bis 1900 mm
ALI 3.116-SL LBB telescopic arms, short (3x), medium (4x) and long (4x), range: 545 mm to 3230 mm
ALI 3.116-SX LBB telescopic arms, short (3x), medium (4x), long (4x), and extension (4x), range: 545 mm to 4230
mm
ALI 3.116-MM LBB telescopic arms, medium (4x), range: 850 mm to 1900 mm
ALI 3.116-ML LBB telescopic arms, medium (4x) and long (4x), range: 850 mm to 3230 mm
ALI 3.116-MX LBB telescopic arms, medium (4x), long (4x), and extension (4x), range: 850 mm to 4230 mm
ALI 3.116-LL LBB telescopic arms, long (4x), range: 1300 mm to 3230 mm
ALI 3.116-LX LBB telescopic arms, long (4x), and extension (4x), range: 1300 mm to 4230 mm
3: Mounting option
Optional accessories
The LBB 3-point carrier replaces the standard rotation frame carrier (ALI 3.299) in the Tops-on configuration, when
the third telescopic arm must be mounted to the upper bearing shell.
This adapter replaces the standard rotation frame in the LBB when measuring smaller bores (> 120 mm).
LBB adapter with sensor LBB adapter mounted on measuring head carrier
This sensor rotation frame has a longer axis of rotation than the standard frame and thus offers a larger adjustment
range in the axial direction.
LBB Sensor rotation frame sensALIGN 5 sensor and RF module mounted on LBB
Sensor rotation frame
The Long Range Laser is used for measuring turbines over a measuring distance of up to 50 meters. With the aid of
an universal mounting base plate, the Long Range Laser can be safely and securely installed on a tripod, on the mag-
netic feet supplied or on the mounting bridges available as accessories.
Features
The Long Range Laser is available in two versions with different wavelengths:
l ALI 4.120: Long Range Laser (675 nm) for ROTALIGN sensors
l ALI 4.120-IS: Long Range Laser (635 nm) for sensorALIGN sensors
The scope of delivery for the two sets ALI 4.120 and ALI 4.120-IS is shown in the following overview:
Scope of delivery
ALI 16.600 Battery box for Long Range Laser, Alkaline Mangan battery incl
ALI 9.494 Inspection certificate for Long Range laser 670/635 nm,
Overview: Case with scope of supply (Mounting base plate is not shown)
Optional accessories
ALI 16.610 Long Range laser Power Box, Lithium Ion Battery <100Wh
TECHNICAL INFORMATION
Technical data
Beam diameter 8 mm
Mounting
Features
Order information
Note: An anti-torsion bridge is required for posts longer than 200 mm.
PRÜFTECHNIK
www.pruftechnik.com