Professional Documents
Culture Documents
Askara Jawa
Askara Jawa
2. This machinery is to supply domestic need on board. It changes the sea water
become fresh water for daily need. It is located in the engine room. It is made from
iron and steel. Fresh water Generator
3. This machinery is to supply the need main engine and boiler. The specific function is
to raise the temperature by using oil in the pipe. The location is in the engine room.
It is made from steel. Heater
5. This machinery is to supply the need main engine and boiler. The specific function is
for cooling the engine on board. The location is in the engine room. It is made from
steel. Cooler
6. This machinery is to supply the need main engine and boiler. The specific function is
to produce or to compress the high pressure air. The location is in the engine room.
It is made from steel. Air compressor
7. This machinery is to produce the steam by boiling water. The location is in the
engine room. It is made from steel. Boiler
8. This machinery is to propulsion and to maneuver. The specific function is to drive the
ship by using rotation of the shaft. The location is at the stern. It is made from steel.
Propeller
9. This machinery is to provide safety. The specific function is to extinguish the fire.
The shape is a tube that consists of tube and hose. It is usually coloring by red. The
location is near to the door in every single room. It is made from steel and rubber.
Fire Extinguisher
10. This machinery is to provide safety. The specific function is to safe the crew and
passenger. The shape is circle. It is usually coloring in orange. The location is in the
engine room. It is made from rubber. Lifebuoy
11. This machinery is to provide safety. The specific function is to safe the crew and
passenger. The shape is boat. It is usually coloring by red. The location is on the
starboard side and port side. Lifeboat
12. This machinery is to moor and handle the cargo. The specific function is to raise and
drop the anchor. It consists of derrick and wire. The location is on the bow.
Windlass
13. This machinery is to moor and handle the cargo. The specific function is to release
and pull the rope while the ship is mooring. It consists of derrick and rope. The
location is on the bow. Mooring winches
14. This machinery is to moor and handle the cargo. The specific function is to hold the
ship from the wave and the wind from drifting. The location is on the bow. Anchor
15. This machinery is to produce electrical and lighting. It consists of stator and rotor.
The location is on the bow. Generator
16. This machinery is one of auxiliary machinery which is located in the engine room.
This machinery is to separate water, oil and dirty liquid before water released or
throw out to the sea. OWS.
17. This machinery is to provide safety. The specific function is to give the emergency
sign by the sounds. The shape is circle and small. It is usually coloring in white. The
location is every single places on board. FIRE DETECTION
18. This machinery is to propulsion and to maneuver. The specific function is to drive the
ship by the direction to turn starboard and port side. It is usually located at the
wheel house. STEERING GEAR
19. This machinery is to moor and handle the cargo. The specific function is to move the
cargo from one place into another place, especially when the ship will load or unload
the cargoes. CRANE.
20. This machinery is one of auxiliary machinery to moor the ship. The specific function
is to hold the anchor for berthing. CAPSTAN
21. This equipment is keep the ship dry and trimmed. It is to throw the fluid from vessel
into sea. The equipment is located at the engine room. BILGE PUMP
22. This machinery is to propulsion and to maneuver. The specific function is to drive the
ship by giving the direction to the ship. This equipment is the part of the steering
gear. It is located at the stern and the bottom of ship. RUDDER