Professional Documents
Culture Documents
②Set the position of stirrer shaft slightly By producing the turbulent flow condition,
away from the center and make it a turbulent water wettability of lump is improved.
flow state instead of a laminar flow state.
③Put in the powder little by little in order not This product has highly water retentivity, so if
to float on the surface of the water immiscible lump grows, the water stop effect
voluminously and then add next powder after is exerted, water wetting in the center
previously poured powder has been becomes worse and then dispersibility is
dispersed in water. getting drastically worse.
A state that dispersion is progressing by A state that dispersion is blocked due to adding
gradual powder addition. voluminous amounts of powder at a time.
◇FAQ
Q,Does the temperature affect the dispersibility?
A,Temperature does not basically affect the dispersibility. It mainly affects the physical such as
the shear rate and the shape of the stirring blade.
Q,What kind of stirring blade do you recommend?
A,We recommend high speed rotation and high shearing strength.
In the microscopic sense, the water dispersion particles of Smectite are considered to be
aggregated in layers, and it is torn off by high shear.
TMM BLDG
T.M.M.BLDG 1-10-5
1-10-5 Iwamoto-cho,
I7251wamoto-Cho, chiyoda-ku,
Chiyoda-Ku, Tokyo 101-0032 JAPAN
101-0032,
CHEMICALS Tokyo, Japan
DIVISION
TEL +81-3-3866-7251
TEL : +81-3-3866-7251 FAX +81-3-3866-2256