Professional Documents
Culture Documents
S.Y. 2021-2022
Modular Distance Learning
NAME: ________________________________________
YR.& SECTION: _________________________________
SUBJECT TEACHER: ____________________________
SUBJECT: _____________ SCORE: _____________
REMARKS: PASSED
FAILED
General reminders in using the BOOKLET:
1. Use this BOOKLET with care. You will write your answer in this booklet.
5. Return this booklet to your teacher or facilitator once you are through with
it.
6. You may use blue or black pen only or pencil in answering the test.
7. Don’t forget to write your name in the front page of this booklet.
If you encounter any difficulty in answering the test in this BOOKLET, do not
and older than you at home. We hope that through this material, you will
6. When Pedro used a die to cut threads on a metal rod, he used oil to:
A. clean the rod C. lubricate the rod
B. harden the rod D. soften the rod
7. James measures and marks a board correctly, if he saws on the waste side of the line
and leaves the line, the size of the boards will be:
A. longer than needed C. thicker than needed
B. shorter than needed D. the appropriate length
8. Marrio wanted to use permanent marking on the surface of metal. What marking tools
will he used?
A. Pliers C. Divider
B. Scraper D. Punches
10. Why do you think measuring tools are beneficial to metal works?
A. Ruler C. Caliper
B. Meter Stick D. Pull-push Rule
13. It is used for measuring short pieces of stock.
A. Ruler C. Caliper
B. Meter Stick D. Pull-push Rule
14. The following are measuring instruments, except;
A. Ruler C. Pull-push Rule
B. Protractor D. Chisel
15. Suppose you are told to measure the length of a long metal. The problem is you have
no measuring tools to use. What will you do?
A. I will not do anything
B. I will try to find a stick to use.
C. I’ll try to borrow pull-push rule
D. None of the above
19. A system of measurement originated in England also known as the U.S. customary
system of measurement.
A. Metric System C. Standard System
B. English System D. Measurement System
20. Why correct measurement is important in the metal arc welding?
A. it is important because precise amount are required for better results
B. Aiming for cleaner, high quality welds at lower cost
C. it is easy to do
D. it saves huge amounts of time, money and labour
I. PERFORMANCE TASK
Task – Measure Me!
Directions: You need to measure the dimension of your table in your house using the available
tools you have. Apply the 2 measuring system: Metric System (use Centimeter), and English
System (use Inch).
b. Draw the layout of your table and write the exact measurements (centimeter and inches)
in each dimension?
(Signature Over Printed Name of the Parents) (Signature Over Printed Name of the Student)