Professional Documents
Culture Documents
Department of Education
REGION III
SCHOOLS DIVISION OF CABANATUAN CITY
IMELDA INTEGRATED SCHOOL
SUMMATIVE TEST IN ELECTRICAL INSTALLATION AND MAINTENANCE 8
Multiple Choice.
Directions: Read the statement carefully and identify what is being described or
defined. Write the letter of the correct answer on your answer sheet.
1. This could be in the shape of a screwdriver or a wrench. Its function is to drive screw
with hexagonal slot head.
2. This is used for gripping, holding, and cutting electrical wires and cables and even small
nails. They are usually used by linemen in doing heavy tasks.
3. This is used for cutting and holding fine wires. This can reach tight space or small opening
where other pliers cannot reach and also used in making terminal loops of copper wires.
a. Fuse c. Breaker
b. Capacitor d. Switch
6. Evette is a storeroom personnel, she was asked to pass a form to the purchasing
department which contains items that needs to be ordered as well as the quantity and
timeframe. The form also contains the authorization to proceed with the purchase. This form
is called?
a. Purchase Requisition c. Job Order Form
b. Borrowers Form d. Inventory Form
7. Robert was assigned to enlist all the materials that the company owns as well as
categorizing these materials into working or functional and not functional materials to
consider the portion of a business’s assets that are ready or will be ready to sell.
8. Imelda have requested 5 tables for those teacher’s that doesn’t have working tables. She
sent a form that has a written instruction to perform the requested products according to
specified requirements, within specified time frame. What form does she used?
9. Sir Ethan decided to request the tools and equipment he needs to create a working table.
He indicated the date, the job that is to be done which is the table, and the person who will
approve his request when it was returned and if it was in a good condition. What form will he
prepare?
10- 12. Sir Ric received a parcel which he then examined if it is completed or damaged. He
noticed that some parts of the Item were missing then he decides to request an inspection.
What will be the sequence an inspection follows.
a. Once contacted about damage or shortage, the carrier may waive inspection and tell
you. If so, write down the name of the person who waived the inspection, and the
date and time of waiver.
b. After the phone request, make a request for inspection by the carrier in writing. Note
the date and time of your previous phone call and the person contacted. Keep a
copy of your request letter on file
c. The receiving person is responsible for requesting the carrier to inspect the damaged
goods and packaging. The formal request should be made by phone right after
discovering any loss or damage.
13.It is the process or the result of determining the ratio of a physical quantity, such as a
length, time, temperature, etc.,
a. Metrology c. Mensura
b. Measurement d. Size
14. This device is used to measure the amount of electrical current intensity in a circuit.
a. Voltmeter c. Pull push rule
b. Ammeter d. Ruler
15. otherwise called as Multi-tester; is used to measure the voltage, resistance and current
of a circuit.
a. Voltmeter c. Pull push rule
b. Ammeter d. Ruler
16. It is a measuring tool used to measure the length of an object in centimeter and inches
a. Voltmeter c. Pull push rule
b. Ammeter d. Ruler
17. This devices serves as a measuring tool used to measure length, width and thickness of
short flat object and in sketching straight lines
a. Voltmeter c. Pull push rule
b. Ammeter d. Ruler
18. Evangeline a grade 8 learner, wants to cover her study table using a tablecloth, but she
doesn’t know how long and how wide tablecloth will she use. What tools will she use to
measure the dimension of her table.
a. Voltmeter c. Pull push rule
b. Ammeter d. Ruler
19. Ryan is a licensed electrical engineer and few of his jobs is to test if the electrical outlets
are all working, correct amount of voltage were being supplied, the limiter or resistor were all
set. What measuring device will help him to test the following factors using a single device.
a. Volt Ohmmeter c. Wire Gauge
b. Clamp Ammeter d. Micrometer
20. Convert 3 centimeter into millimeter.
a. 30 mm c. 0.3 mm
b. 300 mm d. 0.03 mm
21. Convert 4 Yard into inches
a. 124 Inches c. 144 Inches
b. 134 Inches d. 154 Inches
22. Convert 3 decimeter into centimeter
a. 30 mm c. 0.3 mm
b. 300 mm d. 0.03 mm
23. Convert 36 Inches to feet.
a. 4 feet c. 3 feet
b. 6 feet d 5 feet
24. Convert 10 millimeter to centimeter
a. 2 cm c. 3 cm
b. 1 cm d. 4 cm
25-28. Identify the symbols that were used in the schematic diagram below
26
25
27
0
28
29. Robert is an electrical engineer; he wants to teach his high school brother to do a sketch
of electrical circuits that shows the external appearance of each component. It is like a
photograph of the circuits and uses simple image’s part so that his brother doesn’t find it
complicated. What is this diagram that shows only the appearance of the component?
a. Schematic Diagram c. Oblique Drafting
b. Pictorial Diagram d. Isometric Drafting
30. Robert’s brother thinks he can handle a more comprehensive diagram. Roberts begun to
sketch electrical symbols to teach his brother the symbol used in electrical installation. It
shows the actual number of components and how the wiring routed but not the actual
location.
a. Schematic Diagram c. Oblique Drafting
b. Pictorial Diagram d. Isometric Drafting
31. Identify the type of circuit used in the image below.
37.
a. Diode c. Male Plug
b. Capacitor d. Service Entrance
38.
a. Diode c. Male Plug
b. Capacitor d. Service Entrance
39. it uses compressed air to flow into the jack cylinder and causes the ram to extend and
raise the vehicle.
a. Wrench c. Screw Driver
b. Pneumatic floor jack d. Personal Protective Equipment
40. Are used to drive or turn screws. The common type has a single flat blade for driving
screws with slotted heads. The other type has the cross slotted head.
a. Wrench c. Screw Driver
b. Pneumatic floor jac d. Personal Protective Equipment
41. A tool used to turn screws, nuts and bolts with hexagonal heads. ―Hexagonal‖ means
six-sided. A variety of wrenches are used in the shop.
a. Wrench c. Screw Driver
b. Air Drill d. Personal Protective Equipment
42. A gadget that protects workers from injury or illness caused by having contact with the
dangers/hazards in the workplace, used by linemen to remove insulation of wire and cables
in low and high voltage transmission lines.
a. Wrench c. Screw Driver
b. Air Drill d. Personal Protective Equipment
43. This is lighter than a comparable electric drill. Repeatedly stalling or overloading does
not damage or overheat the air drill.
a. Wrench c. Screw Driver
b. Air Drill d. Personal Protective Equipment
44. This is a component of a solution that dissolves solute and is usually present in
large proportion or amount. It can be classified as polar and nonpolar.
a. Water c. Gasoline
b. Solvent d. Kerosene