Professional Documents
Culture Documents
MULTIPLE CHOICE: Choose the letter that corresponds to the best answer.
NO.
A. 1 B. 3. C. 2 D. 4
1. It Indicates some precautionary measures against potential hazardous situation which, if not avoided,
may result to a minor or moderate injury.
2. This indicates that a person should wear safety goggles or any related protection for the eyes.
3. It means that any activity is not allowed as stated by the symbol.
4. It means that a person should make some reading before doing any activity
5. Which of the following are lines seen on the edge of an object?
A. Access Line
B. Break Line
C. Invisible Line
D. Visible Line
6. Which of the following lines show that a line has been broken?
A. Long Break line
B. Long Electric line
C. Long Gravity line
D. Volt Break line
7. What type of line are drawn in heavy freehand line?
A. Center Line
B. Leader Line
C. Orthographic line
D. Short break line
8. Mr. Lico is showing the layout of the location of light, switches, convenience outlets, and the power outlets in
his work. Which plan did He emphasized?
A. Arch Plan B. Build Plan C. Electrical Plan D. Work Plan
9. Which of the following shows the meaning of each symbol used in the electrical plan?
A. Legend B. Note C. Signal D. Output
10. What term in electrical is the fast and convenient way to draft ideas on paper?
A. Autohand sketching C. Free hand sketching
B. Backhand sketching D. Gictrical sketching
11. Which of the following are available with both insulated and uninsulated handles, which are used in handling
and twisting wires. The handle insulation is not considered sufficient protection alone?
A. Flyers C. Staplers
B. Pliers D. Jouzers
12. The code requires that at least one __________ circuit is supplied to the laundry outlets.
A. 15 amp C. 25 amp
B. 20 amp D. 30 amp
Arellano University – Malabon
Elisa Esguerra Campus
Gen. Luna Street, Brgy Bayan-Bayanan, Malabon City
S.Y. 2021-2022
2ND Semester
Grade 11
3RD PERIODICAL TEST
ADVANCED INDUSTRIAL ELECTRICITY
13. Which type of category did hammers, mallet, and ball pen hammer belong?
A. Pulling C. Striking
B. Pushing D. Welding
14. The circuit load of 15 ampere circuit shall be used for ________________.
A. Amperage
B. Lamp circuit
C. Lighting Circuit
D. Strip Circuit
15. Tools are the _____________ of electrical wiring installation this made easier for an electrician to perform
accurately and precisely the competency and skills needed.
A. Backbone
B. Basis
C. Standard
D. Work
16. Plug outlet or convenience receptacles shall be ___________ in computing the load if its not in the load of
general lighting circuit.
A. Counted C. Documented
B. Disregard D. Estimated
17. Which of the following is NOT in considering the details in the floor plan?
I. Location, type and rating of lighting fixture
II. Location, type of power outlet and their rating
III. House wiring installation
IV. Location, type of control system used.
A. I B. II C. III D. IV
18. Which of the following come in various sizes and shapes used to drive and pull out screws and are made of
insulated handles with either sharp and square tips?
A. Cutting Drivers C. Screw Drivers
B. Lopping Drivers D. Wiring drivers
19. Mr. Lico needs to make a hole in building structure for passage of wires and conduit in both new and old
installation, indoor and outdoor wiring. Which of the following tools will HE use?
A. Click borer B. Drilling Equipment C. Tapping gear D. Void Bender
20. The code requires sufficient circuitry to supply residential load of ____________ per square meter..
A. 20 watts
B. 25 watts
C. 30 watts
D. 35 watts
For No. 21 – 24.. Choose the best answer from the choices given below.
A. (21) B. (22) C. (23) D. (24)
25. Which of the following are developed and constructed for a special purpose in order to control the flow of
current in an electrical circuit?
A. Electrical Equipment C. Electrical Supplies
B. Electrical Materials D. Electrical Tools
26. Which of the following is the correct electrical symbol for this ?
I. Electrical Bulb
II. Electrical Lighting
III. Electrical Watts
IV. Street Lighting
A.I and II B. II Only C. III and IV D. IV only
A. B. C. D.
29. Which of the following indicates high voltage in the area and surrounding equipment?
A. Voltage Danger B. Voltage Down C. Voltage Up D. Voltage Zip
A. 30 B. 33. C. 32 D. 31
30. This is a primary material used for soldering the wire in an electrical connection.
31. This tool is used for the removal of fine screws in a wiring connection.
32. This tool is used for striking objects to fixed the platform.
33. A tool used in measuring the diameter of a wire to be fitted in installing wiring connection.
35. Which of the following refers to a collection of natural phenomena descriptors including the result of
experience, observation or experiment, or a set of premises?
A. Beta B. Code C. Data D. Set
36. Which of the following is an electric pressure or electromotive force will produce a current of 1 ampere
through a resistance of 1 ohm.?
A. Bind B. Electric C. Gravity D. Volt
37. What type of drawing is used to show the front top and side view of the object?
A. Ballistic B. Opaque C. Orthographic D. Trianglic
38. Which of the following is an example specifies hazardous situation which, if not avoided, will result to a
serious injury or even death.?
A. Aid B. Danger C. Hazard D. Warning
Arellano University – Malabon
Elisa Esguerra Campus
Gen. Luna Street, Brgy Bayan-Bayanan, Malabon City
S.Y. 2021-2022
2ND Semester
Grade 11
3RD PERIODICAL TEST
ADVANCED INDUSTRIAL ELECTRICITY
39. What is the electrical unit is used to measure electrical current that is (coulombs per second)?
A. Ampere B. Ambere C. Amsere D. Lumber
40. What kind of drawing shows the object in 3 dimensional views.?
A. Agolithic C. Isometric
B. Diolithic D. Dialectic
41. Which of the following is a metric unit of energy: watt per second. 1 Kwhr = 2,655,000 ft-lb = 1.341 hp-hr =
3413 Btu = 3,600,000 joules.?
A. Joube C. Joule
B. Jouke D. Jouze
42. Mr. King louise is creating an electrical wiring installation by using a continuous connection of light bulbs.
Which of the following is the type of electric circuit He applied?
A. Accentric circuit C. Series
B. Bar Circuit D. Wired circuit
44. Which of the following indicates some precautionary measures against potential hazardous situation which, if
not avoided, may result to a minor or moderate injury?
A. Cabtion B. Caption C. Cation D. Caution
45. Which of the following is the most important electrical principles that engineers and technician should know
and understand?
A. Signs B. Signages C. Symbols D. Time
46. Mr. Natividad is making a job plan in his common wiring, splices, taps and joints. Which of the following will
be his next step to be done after job planning?
A. Gathering of materials C. Documentation of the project
B. Creating the design/sketch D. Estimating the cost
49. Mr. Soni is documenting the supplies being delivered into his department. Which of the following document
will support for the total amount of payment of the supplies?
A. Checklist B. Job plan C. Receipt D. Voucher
Arellano University – Malabon
Elisa Esguerra Campus
Gen. Luna Street, Brgy Bayan-Bayanan, Malabon City
S.Y. 2021-2022
2ND Semester
Grade 11
3RD PERIODICAL TEST
ADVANCED INDUSTRIAL ELECTRICITY
50. It is to interpret _________________ of equipment, fixture and correction stated in the plan.
A. Electrical Auction
B. Electrical Installation
C. Electrical Maintenance
D. Electrical Strike