You are on page 1of 1

DO NOT USE

Wire/Cable Specification Sheet


OLD DATASHEET - DO NOT USE
This Focal spec along with
Part number 106-3393 106-3385 with a finish diameter
of .23 was found to be too large for
cage slip ring. Focal changed the
Description Wire, hook-up, 10 AWG, 5000 V, red
spec to .20 but kept their same part
number.
English SI Notes
Electrical
2
Conductor size 10 AWG 5.3 mm
10383 cmil

Conductor Silver plated copper


Stranding 37 x 26 AWG

Voltage 5000 V

Temperature class 392 ºF 200 ºC


Core DC resistance at 20 C 1.19 mΩ/ft 3.9 mΩ/m
Shield resistance at 20 C n/a mΩ/ft n/a mΩ/m
Nominal impedance n/a Ω

Ampacity 21 A 7-24 conductors, 30 C ambient

Physical
Insulation ETFE-TEFZEL 750

Insulation thickness n/s in. n/s mm


Insulation colour Red Colour coating is not acceptable
Armour n/a
Jacket n/s
Jacket thickness n/s in. n/s mm
Jacket colour n/s

Finished diameter 0.23 in. 5.8 mm

Weight n/s lbs/kft n/s kg/km

Minimum bend radius 1.4 in. 35 mm


Minimum temperature n/s ºF n/s ºC
Maximum temperature 392 ºF 200 ºC

Maxiumum pulling tension n/s lbs. n/s kg

Fire rating
Standards

Manufacturer/Supplier Part number Spec available?


Suggested manufacturers Harbour Industries n/a No
or suppliers Anixter 5MG-1001-03 No

Notes: * = not required Stranding is number of strands x wire diameter in inches or size in AWG.
n/s = not specified Minimum requirements are specified unless otherwise noted.
n/a = not available/applicable All dimensions are nominal

Critical features are in bold italics. Wire will be inspected against these requirements
Focal Technologies Corp.
40 Thornhill Drive
Obsolete Focal part number 3393 Dartmouth, Nova Scotia B3B 1S1

Approved: Part number: 106-3393 Rev 2

You might also like