Professional Documents
Culture Documents
Copper and Copper Alloy Products: Industrial Rolled
Copper and Copper Alloy Products: Industrial Rolled
KG
Copper and Copper Alloy Products
[EN]
Industrial Rolled
Copper and Copper Alloy Products
KME Germany GmbH & Co. KG
KME and copper
KME Germany GmbH & Co. KG with its production sites in Osnabrück
and Menden manufactures Standard Products for the building and rolled
industry and also in Osnabrück Special Products for industrial applications.
The precise definition of mechanical properties such as high electrical con-
ductivity
2 or narrow production tolerances are essential for industrial use.
4
Rolled Products
for industrial applications
KME rolled products comply fully with the main international standards
(EN, DIN, ASTM, BS, AFNOR etc.)
Dimensions Coils
Width Thickness Inner diamter of the coil Max.
mm mm mm coil weight
15 – 700 0.15 – 1.60 300/400/500/600 12 kg/mm
50 – 1,220 0.40 – 4.00 400/600 12 kg/mm
100 – 680 3.00 – 4.00 400/600 12 kg/mm
700 – 1,220 0.20 – 2.00 500/600 12 kg/mm
Other dimensions, coil weights and inner diameter of coil upon request.
Materials
DIN EN CEN ASTM JIS
Cu-ETP (E-Cu) CW004A C11000 C1100
Cu-HCP (SE-Cu) CW021A C10300 –
Cu-DHP (SF-Cu) CW024A C12200 C1220
Cu-OFE (OF-Cu) CW009A C10100 C1010
Possible coil weights: 3 to 12 kg/mm range.
Brass is probably the most well-known of all copper alloys. Varying the composition
of copper and zinc creates different types of material which are specifically geared
to meeting particular demands. At KME, brass products are made in a wide variety
of alloys, manufactured to EN 1652 and EN 1654, to tighter tolerances than those
stated in the EN standards.
Delivery Forms
single coils
coils, layer / traverse wound, plastic
or iron drums
Coil weight 300 - 1500 kg
TECSTRIP®_multicoil
(thicknesses: 0.15 - 0.80 mm; widths: 15 - 50 mm)
Materials
DIN EN CEN ASTM JIS
CuSn4 CW450K C51100 C5111
CuSn5 CW451K C51000 C5102
CuSn6 CW452K C51900 C5191
CuSn8 CW453K C52100 C5210
Dimensions Strips
Materials Thickness Width Inner diamter Max.
of the coil coil weight
CuSn0.15
0.15 - 3.0 mm 5 - 630 mm 300/400 mm approx. 10kg /mm
(STOL® 81)
Delivery Forms
In addition, KME supplies special strips such as one- or two-sided
copolymer coated strips and/or tailor-made perforated strips
which are used in radiating cables, etc.
KME produces soft copper strips with clean, smooth surfaces and
deburred edges for transformer windings. Their characteristic feature
is the carefully deburred edges, making them ideal for constructing
electric windings with large conductor cross-sections. They are mainly
used to equip distribution transformers and special transformers for
welding engineering, making rectifiers and electrotechnical appliances.
14
12 KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Copper strips for manufacture Coil design/Packaging
of transformer windings Inner diameter
400 mm for widths up to 700 mm
Cu-ETP (E-Cu58) CW004A 500/600 mm for widths above 700 mm
Cu ≥ 99.97 % with or without paper interleaving
(we recommend the use of paper interleaving)
Standard dimensions
0.50 – 1.20 mm thick x 500 – 700 mm wide
Dimensions Sheets
Thickness Width Length
mm mm mm
0.4 ≤ 3.0 500 –1,250 500 ≤ 600
> 3.0 ≤ 6.0 < 1,800 ≤ 3,048
> 6.0 ≤ 12.0 < 1,800 ≤ 6,000
> 12.0 ≤ 150.0 on request
Larger sheets and other special dimensions upon request
KME produces copper discs and plates to EN 1652 and EN 1653 for
hot-water appliances, household appliances and any type of metal good
with a high-quality surface and the best possible deep-draw properties.
Below is a list of the standards to which all our industrial rolled products refer.
DIN EN 1172
Strips and sheets for the building industry
BS EN 1172
DIN EN 1652
BS EN 1652 Plates, sheets, strips and discs for general purposes
NF EN 1652
DIN EN 1653
BS EN 1653 Plates, sheets and discs for boilers, pressure vessels and hot water storage systems
NF EN 1653
DIN EN 1654
Strips for springs and connectors
BS EN 1654
DIN EN 13599
BS EN 13599 Copper plates, sheets and strips for use in electrical engineering
NF EN 13599
ASTM-B-152
Copper sheet, strip, plate and rolled bar
ASME-SB-152
ASTM-B-171
Copper-Alloy plate and sheet for pressure vessels, condensers and heat exchangers
ASME-SB-171
IIS H 3100 Copper and copper alloys sheets, plates and strips
JIS H 3110 Phosphor bronze and nickel silver sheets, plates and strips
Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and
JIS H 3130
nickel silver sheets, plates and strips for springs
18
ALLOYS
Tensile strength Electric conductivity
Material Copper DIN EN CEN ASTM JIS Rmin .. Rmax BS MS/m IACS (%)
Material Brass
CuZn5 CuZn5 CW500L C21000 C2100 R230 .. R340 CZ125 ≥33 ≥56.9
CuZn10 CuZn10 CW501L C22000 C2200 R240 .. R350 CZ101 ≥25 ≥43
CuZn15 CuZn15 CW502L C23000 C2300 R260 .. R550 CZ102 ≥20 ≥34
CuZn20 CuZn20 CW503L C24000 C2400 R270 .. R480 CZ103 ≥19 ≥32.8
CuZn30 CuZn30 CW505L C26000 C2600 R270 .. R630 CZ106 ≥16 ≥28
CuZn36 CuZn36 CW507L C27000 C2700 R300 .. R630 CZ108 ≥14 ≥24
CuZn37 CuZn37 CW508L C27200 C2720 R300 .. R630 CZ107 ≥14 ≥24
Material Bronze
CuSn4 CuSn4 CW450K C51100 C5111 R290 .. R700 PB 101 ≥11 ≥19
CuSn5 CuSn5 CW451K C51000 C5102 R310 .. R690 PB 102 ≥10 ≥17
CuSn8 CuSn8 CW453K C52100 C5210 R370 .. R850 PB 104 ≥7.5 ≥13
19 23
Tensile strength Electric conductivity
Material Nickel DIN EN CEN ASTM UNS JIS Rmin .. Rmax MS/m IACS (%)
Cu75Zn20Ni5 – – – – – -
CuAl5Zn5Sn1 – – – – – – – –
CuAl6Ni2 – – – – – – – –
20
Value adding
Value adding at KME covers all the stages of processing the basic material copper into semi-finished
and finished products. KME supply their products with the great advantage that they are all from
a “one-stop shop”.
© DKI © DKI
Mine Recycling
© DKI
Cathode Smelting
Melting
Casting
Billets Slabs
Industrial Rolled
PO Box 33 20
49023 OSNABRÜCK
Klosterstraße 29
49074 OSNABRÜCK
GERMANY
Fon +49 541 321-4161
Fax +49 541 321-84161
industrial-rolled-germany@kme.com
www.kme.com
® = registered
trademark
Use of products herein implies a careful assessment of its intended purpose, as well as environmental and operating conditions where product is to be put in.
Such assessment is to be carried out by skilled technicians at a planning stage. KME assumes no obligation or liability in connection to any use of its products
not in accordance to above recommendations.
KME informs that product pictures herein are intended as examples only. KME shall not be held responsible for any possible inexactness and / or inaccuracy
herein and further reserves the right to alter, modify, or amend herein contents any time.
0718.000.0108