Professional Documents
Culture Documents
ABSORPTION
CHILLER
Nomenclature
Chiller heater
DH: Direct-fired double-effect H series
DN: Direct-fired double-effect N series
DS: Direct-fired double-effect S series
Chiller
SH: Steam-fired double-effect H series
SS: Steam-fired double-effect S series
MH: Hot-water single-effect H series
2H: 2 Stage, low-temperature,
W: Water hot-water single-effect H series Water working pressure:
2N: 2 Stage, low-temperature, C: Chilled water: 5kgf/cm2G
hot-water single-effect N series Cooling water: 5kgf/cm2G
Multi heat source chiller G: Chilled water: 8kgf/cm2G
HA: Heat source(Exhaust gas + Hot water + Gas) Cooling water: 8kgf/cm2G
HB: Heat source(Exhaust gas + Steam + Hot water) K: Chilled water: 10kgf/cm2G
HC: Heat source(Exhaust gas + Steam + Gas) Cooling water: 10kgf/cm2G
HD: Heat source(Exhaust gas + Steam + Hot water + Gas) N: Chilled water: 12kgf/cm2G
HS: Heat source(Exhaust gas + Steam) Cooling water: 12kgf/cm2G
HW: Heat source(Exhaust gas + Hot water) R: Chilled water: 16kgf/cm2G
HF: Heat source(Exhaust gas + Gas) Cooling water: 16kgf/cm2G
U: Chilled water: 20kgf/cm2G
Heat pump Cooling water: 20kgf/cm2G
PX : Producing hot water
W C DH 024 S K 6 1
S: Standard
A: 1 step-up
heating capacity
B: 2 step-up
heating capacity 6: Leaving hot water
Nominal ton: C: 3 step-up temperature 60°C
10RT 001 heating capacity 8: Leaving hot water Develop
100RT 010 R: Other type temperature 80°C -ment
C: Chiller 1000RT 100 N: Cooling only N: Chiller sequence
Contents
02 Nomenclature
03 Line up
04 Absorption chiller application
05 Equipment overview
09 Options check list
12 LG Absorption chiller tube material
56 Thermal insulation
58 Piping diagram
61 Standard of water quality
62 Fuel piping
63 Multi-Sectional shipment
65 Outline & Foundation
92 Schematic diagram
95 Interface diagram
Line up
Direct fired absorption chiller & heater
Model 0 100 500 1,000 1,500 3,000
Absorption chiller
Model 0 100 500 1,000 1,500 2,000 3,000 4,000
WC2H
28RT 1,020RT 2,000RT
Hot water fired
Heat pump
Model 0 300 1,000 5,000 10,000 20,000 30,000
* Available on request.
With over 50% domestic market share, LG Electronics has provided heating,
over 40 years. Now the company, specialized in absorption, centrifugal & GHP,
now wants to share its leading technology with the global friends.
The LG Absorption Chillers have always been nation’s No.1 energy saving
chillers, since the company has considered R&D as frontier mover of all.
• Strength and hardness of stainless steel tube is higher than chiller so to prevent any damage could happen at abnormal
that of copper tube. operation. The machine can stop automatically by reinforced
safety function when the chiller operation reached at abnormal
Thickness of corrosion(mm) state.
0.75
Copper
Optimized dilution operation shortened stoppage time
Stainless
0.5 steel LG's newly designed microprocessor decides when to equalize
concentration of solution in every part of chiller by self diagnostic
Copper : 0.4mm calculations. Also this led to saving dilution operation as well as
0.25
STS : 0.002mm
energy saving at auxiliary equipments, such as water pumps by
reducing idle time from 15 min to 5 min.
0
start up 1 year 2 year 3 year 4 year 5 year
Operating time(year) High reliability & practical design
High performance of purging system
Copper Stainless steel
Newly designed injector typed, purging either at upper shell
Corrosion rate 2400% 100% and lower shell, a new LG purging system, enabled less purging
(mm/year) (0.1352700) (0.0056209) time and better purging performance.
Loss by weight 1500% 100%
(mg/year) (-0.0196) (-0.00013)
Marine hatch type water box
No need to cut or dissemble for tube cleaning or maintenance
Reinforced user interface design purposes, marine hatch typed water box allows an operator to
Over 40 years experience with successful delivery of 10,000 clean tubes in less time.
units. LG Absorption chiller has been focused on user interface
operation range.
Outlet of
Cooling Water Condenser Low Temp.
Generator
time
7” Color LCD with high resolution Real time operation status Time schedule
Condenser
temperature
ve
4%
ur
nc
~6
tio
54
iza
in
all
ta
st
ai n
Input-energy control
ry
M
rc
LiB
Temperature ( C)
Controller
Process during Power failure
Auto Self Diagnosis and Restart by Blackout Response Function.
Controller Micom
Control
Communication Modbus, RS-485 BACnet TCP/IP(Ethernet) Lonwork
Pannel
Color Warm Gray etc. ( Munsell NO. : )
Material
Part Available
2H-type (WC2H Series) 2N-type (WC2N Series)
Evaporator
Copper Copper
Tube
Lower Unit
Absorber
Copper Stainless Steel
Tube
2nd Generator
Copper Stainless Steel
Tube
Upper Unit
Generator
Stainless Steel Stainless Steel
Tube
1st Generator
Stainless Steel Stainless Steel
Tube
Aux. Generator
High Temp. Unit Stainless Steel Stainless Steel
Tube
Condenser
Copper Copper
Tube
Shell Rolled Steel
Note:
1. 1usRT = 3,024kcal/h, 1kW = 860kcal/h
2. Standard Tube and Water Side Pressure(Chiller & Cooling Water Circuit): 10kg/ G(981kPa)
3. Currents & Electricity Consumptions are based on 3ø 380V 60Hz
4. Alternate cooling water temperaure range available upon request.
WC2H / WC2N
1. All external water piing are to be provided with