Professional Documents
Culture Documents
Electrical installation
Formwork coast redaction
Aesthetically good
1. Ribs shall not be less than 70 mm width and shall have a depth excluding any topping of
not more than 4 times the minimum width of the rib
2. The rib spacing shall not exceed 1 meter
3. Thickness of topping shall not have less than 40 mm or less than 1/10 of the clear
distance between the ribs
4. The topping shall be provided with reinforcement mesh providing in each direction
across sectional area not less than .001 of the section of the slab
o Girder beam
o HCB
o Ribbed beam
o Topping slab
Rib width 80 mm