Professional Documents
Culture Documents
Page 1 of 8
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312D L EXCAVATOR JBC
Configuration: 312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine
The following procedure is used in order to change the settings for the work tool.
Note: Make sure that the hydraulic lockout control is in the LOCKED position before you change the
settings for the work tool.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 2 of 8
Illustration 1 g01198159
1. The default screen of the monitor is shown in Illustration 1. This screen appears when the
monitor is initially turned ON.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 3 of 8
Illustration 2 g01197980
(1) Up key
(8) OK key
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 4 of 8
Illustration 3 g01198279
2. Press menu key (4) . The screen shown in Illustration 3 will be displayed.
3. Press right key (2) or left key (5) in order to highlight the "SETTING" menu option from the
"MAIN MENU" screen.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 5 of 8
Illustration 4 g01198281
5. Press up key (1) or down key (6) until "WORK TOOL SELECT" is highlighted.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 6 of 8
Illustration 5 g01198295
7. After OK key (8) is pressed, the "WORK TOOL SELECT" menu will be displayed with the
current options for work tool. Refer to Illustration 5.
8. Press up key (1) or down key (6) in order to highlight the desired work tool.
Note: If the work tools have been configured through Cat® Electronic Technician (Cat ET), the
names of the work tools will be displayed instead of the default names from the factory. The
factory default names for the work tools are numbers, "TOOL #01" through "TOOL #10".
Changing the factory work tool default name to the actual work tool name will simplify the
selection of the work tool by the operator.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 7 of 8
Illustration 6 g01198298
NOTICE
9. When the desired tool is highlighted, press OK key (8) . If a dot appears in the circle to the left
of "TOOL NAME", the work tool is selected. See Illustration 6.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16
312D & 312D L Excavators JBC00001-UP (MACHINE) POWERED BY C4.2 Engine(S... Page 8 of 8
Note: Press home key (3) in order to return to the default display.
Copyright 1993 - 2020 Caterpillar Inc. Mon Nov 16 20:31:39 UTC+0700 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 2020-11-16