Professional Documents
Culture Documents
Go to ptc.com
Pick eSupport
Run
Pick Customize
Pick Finish
Copy the config.pro file from the network drive “CREO files needed for
install” into this folder. The best way to do this is to copy the config.pro
to your desktop and drag it into the folder. (Some computer will not let
a direct copy into these folders.
Now right click on the CREO Parametric Icon and open the Properties.
Change the User\Public\Documents to temp as shown
Pick Apply
Accept then OK
You can right click on the Icon again if you want and change the name
of the Icon to CREO 7.0
Now open and check operation. You will need to “Allow access” a few
times then all should work.
Good Luck!!