You are on page 1of 2

1. Find the work possess for a helium gas at 20°C.

A. 609 kJ/kg B. 168 kJ/kg C. 229 kJ/kg D. 339 kJ/kg


Solution:
()

()

2. Two kilogram of gas is confined in a 1 m3 tank at 200 kPa and 88°C. What type of gas is in the
tank?
A. Helium B. Ethane C. Methane D. Ethene
Solution:

( ) ( )( )

()

3. Find the enthalpy of Helium if its internal energy is 200 kJ/kg.


A. 144 kJ/kg B. 223.42 kJ/kg C. 333.42 kJ/kg D. 168 kJ/kg
Solution:

()

4. Compute the mass of a 2 m3 propane at 280 kPa and 40°C.


A. 6.47 kg B. 5.1 kg C. 10.20 kg D. 9.47 kg
Solution:
()()

( ) ( )( )

5. Compute the air flow in ft3/min of mechanical ventilation required to exhaust an


accumulation of refrigerant due to leaks of the system capable of revolving air from the
machinery for a mass of 4 lbs refrigerant.
A. 200 B. 210 C. 220 D. 230
Solution:
1

6. Compute the free aperture cross section in m3 for the ventilation of a machinery room if the
mass of refrigerant is 9 kg.
A. 0.314 B. 0.414 C. 0.514 D. 0.614
Solution:

7. A 29.53” x 39.37” pressure vessel contains ammonia with f = 0.041. Compute the minimum
required discharge capacity of the relief device in kg/hr.
A. 106.71 kg/hr B. 108.71 kg/hr C. 110.71 kg/hr D. 112.71 kg/hr
Solution:
( )
( )( ) ( )

8. Compute the maximum length of the discharge pipe installed on an outlet of a pressure-relief
device in feet for internal pipe diameter of 0.5 inch and rated discharge capacity is 8 lb/min of
air. The rated pressure of relief valve is 10 psig.
A. 0.286 ft B. 0.386 ft C. 0.486 ft D. 0.586 ft
Solution:
()
()()
()

9. A thermal power plant has the heat rate of 11,363 Btu/kW-hr. Find the thermal efficiency of
the plant.
A. 28% B. 30% C. 34% D. 40%
Solution:

10. What is the hydraulic gradient of a 1 mile, 17 inches inside diameter pipe when 3300
gal/min of water flow with f = 0.03?
A. 0.00714 B. 0.00614 C. 0.00234 D. 0.00187
Solution:

( )

You might also like