Professional Documents
Culture Documents
Diagnostic tool:
This instrument is known as fuel injection diagnostic tool of fi
diagnostic tool.
It is used to diagnose electrical faults in fuel injection system.
Components:
Digital display,
Up button,
Mode button,
Down button,
Power led,
Wire bundle,
Clips.
Radiator cap tester:
This instrument is known as to radiator cap tester and used to
check the radiator cap function.
It consists of a pressure gauge which is used to measure the air
pressure.
Pressure valve which is used to control the pressure cap.
Number of air hole also provided on this device.
Plunger which is used to apply pressure.
A radiator pressure cap also attached to the pressure gauge
through the tube.
The components are known has radiator cap adapter.
A component is used to attaché the radiator cap.
It consists of a gauge dial head which from dial head.
Fuel pressure gauge:
This instrument is known as fuel pressure gauge.
It is used for measuring the pressure of fuel in motorcycle.
It is also used in fuel injectors, petrol pumps etc.
It consists of an indicator dial.
The indicator dial has reading market on it.
A needle is present to indicate the reading.
A hose and a knob are present to connect.
Remove the cap from the t-joint present between the fuel hose and
fuel pumps.
Connect the knob of the fuel pressure gauge to the t-joint.
Start the engine and measure the fuel pressure.
Steering nut wrench:
This tool is known as the steering nut wrench.
It is widely used in automobile industry for tightening or loosning
a nut or a bolt.
Apply the steering nut wrench on the slotted nut and match it with
the thread of the slotted nut.
Rotate the steering nut wrench in clockwise direction to tighten the
nut.
To loosen the nut, rotate the steering nut wrench in anti-clockwise
direction.
T-Handle:
This instrument is known as T-handle and is used to hold the outer
pipe of the front fork.
It is mainly used for holding the outer pipes of the front fork
loosening and tightening the hex socket head bolt.
A T-handle consists of a long metallic rod with a flat end.
A grip handle is also attached to the metallic rod which helps in
holding and operating the tool.
Insert the T-handle into the fork inner tube.
Using the T shape Allen key tighten or loosen the Allen bolt
present at the opposite end.
TFF oil seal installation tool:
It is used to install the oil seal in suspension assembly.
Place the oil seal in the groove of the suspension outer tube.
Place the TFF oil seal installation tool on top of the oil seal.
Install the oil seal by manually adjust the TFF seal installs tool.
Mechanical seal or bearing installer:
This instrument is known as mechanical seal or bearing installer.
It is used to install the seal or bearing in engine or wheel of the two
wheel.
A mechanical seal or bearing is consists of a driver, pilot, and
punch.
Place the bearing on the wheel and then place the poilt with punch
set assembly.
Strike the punch set assembly to install the wheel in the bearing.
Cocatile:
This solution is known as located and is used to lock threads
between screw and holes.
This adhesive is used to installing for screw.
Clean the surface which is to be attached together.
Once the surface is clean and removes the cap of the cocatile.
Gently glide the tip of the bottle and apply the adhesive on the
desired surface.
Bring the bolt which is to be attached closer to the one with
adhesive.