Professional Documents
Culture Documents
PRODUCT REFERENCES
Model QCLP-110
Cooling Air Cooled
Supply Voltage 200/230/380/460/575
Frequency (Hz) 60
Variant (MDVAR) Floor mounted
REFERENCE CONDITIONS
Relative humidity (%) 0
Ambient barometric pressure ("HgV) 0
Air inlet temperature (°F) 68
Cooling medium inlet air temperature (°F) 68
Exhaust back pressure (psi(g)) 0
Motor shaft speed (rpm) 3000
LIMITATIONS
Minimum ambient temperature (°F) 32
Maximum ambient temperature (°F) 104
Minimum allowable gas inlet temperature (°F) 32
Maximum allowable gas inlet temperature (°F) 104
Safety valve - mimimum opening pressure (psi) 38
Safety valve - maximum opening pressure (psi) 35
Maximum altitude (ft) - refer to the Product Manager at higher altitudes 3300
Minimum motor shaft speed (rpm) 1200
Maximum motor shaft speed (rpm) 3600
PERFORMANCE DATA
Ultimate pressure (psi) (2) 36
Maximum displacement (cfm free air delivered) 84.1
Nominal motor power (Hp) 18.7
Gas exhaust temperature (°F) 446
Mean Sound pressure level with tolerance dB(A) (3) 60Hz 80 / 3
Maximum oil content of exhaust air (ppm) 0
DESIGN DATA
Canopy length (inches) 42.9
Canopy width (inches) 16.4
Canopy heigth (inches) 26.5
Shipping length (inches) 47.20
Shipping width (inches) 28.7
Shipping height (inches) 37
Net Weight (Lbs) 432
Shipping Weight (lbs) 498
Number of compression stages 1
Maximum male rotor speed 3600
Oil capacity (approx.) (qt) 0.63
Drive motor efficiency at full load (%) 91.2
Motor shaft speed 3600
Electric cable passage (mm) M32
Connection inlet 1.25" NPT
Connection outlet 1.25" NPT
REMARKS
(1) Measured according ISO 21360-2:2012(E)
(2) Volumetric flowrate measured according ISO 21360-2:2012(E). Tolerance: 0,20 mbar(a)
(3) Measured according to ISO 2151:2004 using ISO 9614/2 (sound intensity method)