Professional Documents
Culture Documents
HEIGHT GAUGES
TVM 5
V/V Plus 11
Vectra Touch 17
11 23 Mestra/Mestra Touch 23
53 Alesta 47
53
Horizon/Horizon Granite 53
THV 69
69 Labconcept/Labconcept Premium 75
75
Labconcept Nano 85
TR Scan 135
1
TRIMOS | PRESENTATION
PRESENTATION
TRIMOS GENERAL CATALOG
Dear Customer, dear Reader,
• Height gauges
• Horizontal measuring instruments
• Surface analysis instruments
• Instruments
• Large range of accessories
• Hardware
• Software and driver programs
TRIMOS SA
Av.de Longemalle 5
CH - 1020 Renens
T. + 41 21 633 01 01
F. + 41 21 633 01 02
www.trimos.ch
2
QUALITY
Quality has always been Trimos’ main concern. Our com-
pany, certified ISO9000 for several years, aims to offer its
customers blue chip products and services.
LABORATORY
In order to ensure the highest performances of its instru-
ments, Trimos is equipped with a control laboratory provided
with the latest technologies.
Specifications:
Temperature: 20 °C ± 0.2
Humidity: 50% ± 5
3
TRIMOS | PRESENTATION
SERVICES
In parallel with the sales of instruments, Trimos and its agents Examples of instruments that we can repair:
offer a wide range of services allowing the most profitable
exploitation of its products:
• Technical support
• Training (at Trimos or on site)
• After-sales service
• Repair of instruments
• Upgrade of old instruments
• Calibration
• Customized instruments and accessories
• Software and drivers
• Maintenance contract TELMA TVA
TEL TELMN
WEBSITE
Our website www.trimos.ch is at your disposal. You will find
there the latest information in relation with our firm, our prod-
ucts as well as our sales network.
4
TVM
5
TRIMOS | HEIGHT GAUGES
TVM
introduction
The TVM instruments are perfect for height measurements
and scribing work and reliable in all kinds of workshop condi-
tions. The result of an unique, compact design of the instru-
ment is great mobility and extreme stability.
6
DESCRIPTION
Surfaces
2 references
Internal / external diameters
Tolerances
Min/Max/Delta
Digital display
Handwheel for the
displacement with precision
measuring carriage
7
TRIMOS | HEIGHT GAUGES
TVM
display / software
The clearly defined functions of the display unit allow to col-
lect all height measuring values.
technical specifications
1)
Values valid with measuring insert and holder (TVM1 / 1.1 / 2) at temperature of 20 ± 0.5°C and relative humidity of 50 ± 5 %.
8
diagram
TRIMOS
MODE ON/OFF
180* 102*
standard instrument
code numbers
9
TRIMOS | HEIGHT GAUGES
TVM
Applications
Height and depth measurements Diameter measurements (TVM4) Measuring of centerline distances
(TVM1/1.1/2) (TVM5)
10
V / V Plus
11
TRIMOS | HEIGHT GAUGES
V / V Plus
INTRODUCTION
Talking about the V and V Plus series means looking at a
height measuring instrument of universal use.
The new ergonomic and compact design has been well ac-
cepted from the industry worldwide. Ease of use and quick
performance of all measuring tasks are given by the clearly
defined function keys.
12
DESCRIPTION
Surfaces
Internal / external diameters
Centerline distances
Min/Max/Delta
2 references
Squareness measurements
Calculation mode
Interchangeable
measuring inserts
Integrated electronic
display unit
13
TRIMOS | HEIGHT GAUGES
V / V Plus
DISPLA / SOFTWARE
The clearly defined functions of the display unit allow quick
performance of all required height measurements.
TECHNICAL SPECIFICATIONS
V 300 600
Measuring range mm (in) 300 (12) 600 (24)
Application range mm (in) 535 (21) 835 (32)
Max. permissible errors 1)
µm 8 10
Repeatability (2s) 1) µm 2 (Ø:4)
Frontal squareness deviation µm 10 15
Resolutions mm (in) 0.01/0.001 (.0001/.00005)
Measuring force N 1
Max. manual carriage displacement speed mm/s 1500
Autonomy h 100
Data output RS232
Operational temperature °C +10 ÷ +40
Temperature of storage °C -10 ÷ +40
Weight kg 10 12
1)
Values valid with standard ball probe (TA-MI-101) at temperature of 20 ± 0.5°C and relative humidity of 50 ± 5 %.
14
SCHEMA
CODE NUMBERs
V V Plus
Without air cushion Without air cushion With air cushion
VL300 700 105 10 41 V304 700 105 10 01 V304C 700 105 10 02 Measuring range 300 mm
V305 700 105 10 10 V305C 700 105 10 11 Measuring range 300 mm 1)
VL600 700 105 20 41 V604 700 105 20 01 V604C 700 105 20 02 Measuring range 600 mm
V1004C 700 105 30 02 Measuring range 1000 mm
1)
The instruments V305 and V305C are with low measuring force (0.3-1.2 N)
15
TRIMOS | HEIGHT GAUGES
V / V Plus
APPLICATIONS
Checking of squareness deviation Tiny Surface, diameter and centerline Depth measurement
distance measurements (V-5/V50.9) (TA-IH-109/V-50.5/V-50.4)
16
VECTRA-
TOUCH
17
TRIMOS | HEIGHT GAUGES
VECTRA-TOUCH
INTRODUCTION
The "Vectra-Touch" height measuring instruments are of uni-
versal use in any production field. They are the result of 40
years of experience in development and manufacturing. This
experience makes it possible to introduce a product that
combines ergonomic design with new technology. Its reliable
concept is a reference for durability. Ease of use and quick
performance of all required measuring tasks allow unlimited
applications in any manufacturing area.
18
DESCRIPTION
Surfaces
Internal / external diameters
Centerline distances
Min/Max/Delta
9 references
Sqareness measurements
Angle measurements
Calculation mode
Tolerances
2D 2D measuring mode
Display unit with
Measurement sequences colour touch screen
Statistical analysis
Temperature compensation
Online help
USB ports
RS232 ports
Interchangeable
measuring inserts
Wireless communication
Displacement operating
handle of ergonomic
design with 2 programmable
function keys. Air cushion
activation key
19
TRIMOS | HEIGHT GAUGES
VECTRA-TOUCH
DISPLAY / SOFTWARE
The colour display facilitates the reading of all measuring
parameters. The functions are easily and directly accessible.
The display unit is identical for all models.
TECHNICAL SPECIFICATIONS
1)
Values valid with standard ball probe (TA-MI-101) at temperature of 20 ± 0.5°C and relative humidity of 50 ± 5 %.
20
SCHEMA
STANDARD INSTRUMENT
CODE NUMBERs
Manual Motorized
VT300MA 700 107 10 01 VT300MO 700 107 10 02 Measuring range 300 mm
VT600MA 700 107 20 01 VT600MO 700 107 20 02 Measuring range 600 mm
VT1000MA 700 107 30 01 VT1000MO 700 107 30 02 Measuring range 1000 mm
VT1500MA 700 107 40 01 Measuring range 1500 mm
VT2000MA 700 107 50 01 Measuring range 2000 mm
21
TRIMOS | HEIGHT GAUGES
VECTRA-TOUCH
APPLICATIONS
Diameter measurement with graphic Squareness mechanically adjusted on Measurement of angles and cones
help "EasyScan" all instruments with graphic help display
(TA-MI-101/TA-AD-101) (TA-MI-101/TA-AD-101)
Measurement with automatic dis- Checking of squareness using an Measurement using temperature
placement in programming mode additional electronic probe and colour compensation system with optional
print-out of the curve (TA-MS-101) external sensor (TA-EL-120)
Storage of all data to an external Wireless communication by Bluetooth Standard probes up to 320 mm.
memory, e.g. USB Memory Stick or Wi-Fi (optional) (TA-EL-123/4) (here optional 550 mm)
(TA-EL-140)
22
MESTRA +
TOUCH
23
TRIMOS | HEIGHT GAUGES
MESTRA +TOUCH
INTRODUCTION
The "Mestra" height measuring instruments are classified
among the most accurate ones worldwide. This new instru-
ment line is the result of 40 years of experience, which makes
it possible to offer a product having advanced technologies
combined with ergonomic design.
24
DESCRIPTION
Mestra + mestra-touch
Surfaces
Internal / external diameters
Centerline distances
Min/Max/Delta
9 references
Sqareness measurements
Angle measurements
Calculation mode
Interchangeable
measuring inserts
Tolerances
Wireless communication
Automatic displacement
Mestra-Touch
2D 2D measuring mode
Measurement sequences
Statistical analysis
Handwheel for the displace-
Temperature compensation ment of the measuring carriage
(manual or motorized)
Online help
Displacement operating
handle of ergonomic
design with 2 programmable
function keys. Air cushion
activation key
25
TRIMOS | HEIGHT GAUGES
MESTRA +TOUCH
DISPLAY / SOFTWARE
The colour display facilitates the reading of all measuring
parameters. The functions are easily and directly accessible.
Interactive help
Date and time display
Easy identification of
Acoustic and graphic probing indicator each measuring function
TECHNICAL SPECIFICATIONS
26
SCHEMA
325 330
STANDARD INSTRUMENT
CODE NUMBERs
Mestra Mestra-Touch
Manual Motorized Manual Motorized
M300MA 700 107 10 03 M300MO 700 107 10 04 MT300MA 700 107 10 05 MT300MO 700 107 10 06 Measuring range 300 mm
M600MA 700 107 20 03 M600MO 700 107 20 04 MT600MA 700 107 20 05 MT600MO 700 107 20 06 Measuring range 600 mm
M1000MA 700 107 30 03 M1000MO 700 107 30 04 MT1000MA 700 107 30 05 MT1000MO 700 107 30 06 Measuring range 1000 mm
27
TRIMOS | HEIGHT GAUGES
MESTRA +TOUCH
APPLICATIONS
Height measurement of a small board Checking of a small diameter using 2-coordinate measurement with
(TA-IH-109/V-50.5/TA-MI-118) the adequate measuring insert standard graphic help
(V-5/V-50.9) (TA-MI-101/TA-AD-101)
Checking of squareness deviation using Measurement of a groove using a 90° Automatic measurement of an external
an additional electronic probe and co- angled measuring insert holder and an L- diameter performed with "TRIMOS® NC
lour print-out of the curve (TA-MS-101) shaped insert (TA-IH-105/V.50.5/V-50.3) movement" (TA-MI-101/TA-AD-101)
The complete digital measuring system An USB data output allows the storage Wireless communication by Bluetooth
offers an extremely high accuracy of all data on an USB Memory Stick or Wi-Fi (optional) (TA-EL-123/4)
(TA-MI-101/TA-AD-101) as well as the printing of protocols
(TA-EL-140)
28
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TV2S2 Cone Ø 0-15 mm •
279 901007 010
29
TRIMOS | HEIGHT GAUGES
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TVM2.5 Disc shaped insert Ø 8 mm •
509 05 20 0059
TVM3 Scriber •
609 12 003
30
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TA-MI-102 Measuring insert with tungst. carb. ball Ø 4 mm
509 05 20 0075
• • •
31
TRIMOS | HEIGHT GAUGES
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TA-MI-115 Measuring insert M1.4 with ball Ø 1 mm • • •
279 901001 001
32
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TVM1/1.1/2 Measuring insert + holder (TVM1 + 1.1 + 2) •
609 05 061
33
TRIMOS | HEIGHT GAUGES
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TA-IH-104 Swivel holder Ø 4 and 8 mm • • •
612 11 053
34
ACCESSOries
V/ V Plus
M/MT
TVM
VT
V-50.6 Measuring insert holder M2.5 • • •
279 918002 002
V-5 Reduction Ø 8 / 4 mm • • •
612 11 012
35
TRIMOS | HEIGHT GAUGES
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TA-AD-101 Positioning holder for measuring insert VT/MT • •
603 11 001
36
ACCESSOries
V/ V Plus
M/MT
TVM
VT
V-50.15 Allen key 2.5 mm •
290 000911 005
37
TRIMOS | HEIGHT GAUGES
ACCESSOries
V/ V Plus
M/MT
TVM
VT
BAT-TVM.OPTO Battery •
3705 0002
38
ACCESSOries
V/ V Plus
M/MT
TVM
VT
TA-EL-130 Universal AC adapter, 28 V (without cable) • •
357 0100
39
TRIMOS | HEIGHT GAUGES
ACCESSOries
V/ V Plus
M/MT
TVM
VT
Set of accessories Macro (16 pieces):
40
TELS
41
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TELS
introduction
The Mini-Horizontal TELS is the ideal instrument for checking
small dimensions. It is part of the horizontal instruments family.
42
DESCRIPTION
43
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TELS
display / software
technical specifications
TELS
Absolute measuring range mm (in) 25 (1)
Application range (external measurements) mm (in) 100 (4)
Application range (internal measurements) mm (in) 100 (4)
Max. permissible errors (according to measuring probe) 1) µm 1.5
Repeatability (2s) 1)
µm 0.1
Resolutions 1)
mm (in) 0.1 ÷ 0.0001 (.001÷ 00001)
Measuring force (adjustable) N 3-8
Operational temperature °C +10 ÷ +40
Temperature of storage °C -10 ÷ +40
Weight Kg 15
1)
Depends on measuring probe. Values valid with probe P25 at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5 %.
44
SCHEMA
39.8
112.7
105.7
42
365
390
99
100
136
163
standard instrument
The
TELS instruments are supplied as follows:
Instrument according to specifications User’s manual (750 50 0019 03)
Measuring inserts for external measurement (TELS50) Lapping plate (TA-TO-301)
Measuring anvils for internal measurements (TELS10) Test certificate
CODE NUMBERs
TELS
TELS 700 205 00 01
45
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TELS
Applications
Checking of lengths
(TELS50, TELS5, TELS5.1)
46
ALESTA
47
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ALESTA
introduction
The Alesta family is a product that simplifies the setting of
2-point bore gauges. It replaces the traditional way using a
lot of different rings.
48
DESCRIPTION
49
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ALESTA
display / software
technical specifications
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
50
SCHEMA
247 / 247 / 340
standard instrument
CODE NUMBERs
Alesta
ALE300P 700 204 00 02 Measuring range 300 mm
ALE500P 700 204 10 02 Measuring range 500 mm
ALE1000P 700 204 20 02 Measuring range 1000 mm
51
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ALESTA
Applications
Setting of two-point bore gauges No need to have a lot of different set- Checking of calipers
ting rings. They are replaced by one
single instrument
52
HORIZON
+ Granite
53
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON + Granite
introduction
The «Horizon» instruments respond to the current require-
ments for quality inspection in manufacturing areas. They al-
low a quick, precise checking and setting.
54
DESCRIPTION
Horizon
Horizon Granite
55
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON + Granite
display / software
Horizon
Horizon Granite
Heidenhain ND287 or ND1100
56
TECHNICAL SPECIFICATIONS
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
57
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON + Granite
SCHEMA
Horizon
~ 417
295
Horizon Granite
450/450/550/
650/850
970
2660/2660/3220/3780/4900
4750/4750/5750/6750/8750
390
58
STANDARD INSTRUMENT
CODE NUMBERs
Horizon
H501 700 201 10 02 Measuring range 500 mm
H1001 700 201 20 02 Measuring range 1000 mm
H1501 700 201 30 02 Measuring range 1500 mm
H2001 700 201 40 02 Measuring range 2000 mm
Horizon Granite
HG3000 700 208 60 11 Measuring range 3000 mm
HG4000 700 208 70 11 Measuring range 4000 mm
HG5000 700 208 80 11 Measuring range 5000 mm
HG6000 700 208 90 11 Measuring range 6000 mm
HG8000 700 208 110 11 Measuring range 8000 mm
59
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON + Granite
Applications
Setting of 2-point internal and external Setting of 2-point bore gauges Checking of calipers (TEL5.10)
comparative measuring equipment (TEL5 / TA-SU-301)
(TEL5 / TELMA7 / TELMN7.2)
Checking of snap gauges (TELMA8) Checking of internal diameter of Checking of depth gauges
heavy rings (TEL9 / H-5) (TULM19 / TEL5)
Checking of external micrometers Checking of dial indicators (TEL5CN) Checking of 2-point internal micro-
(TEL5 / TEL11) meters (TEL5 / TELMA7 / TELMN7.2)
60
HORIZON
PREMIUM
61
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON PREMIUM
INTRODUCTION
The HORIZON PREMIUM instruments fulfill today’s require-
ments of high accuracy quality control equipment in production
areas and take into consideration EN ISO 9000 standards.
62
DESCRIPTION
HPA
Display Heidenhain ND1100
or ND287
HPD
Touch screen with
Interchangeable Digital display of the set TRIMOS-WinDHI software
accessories measuring force in Newton for all required measuring
functions
63
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON PREMIUM
display / software
Horizon Premium (HPA)
Heidenhain ND287 or ND1100 display units
TRIMOS WinDHI
TRIMOS-WinDHI Software allows the performance of all re-
quired measuring functions and the connection to the tem-
perature compensation system TempComp as well as to a
gauge inspection and management system.
QMSOFT
Trimos recommends the QMSOFT software package for in-
spection and management of all measuring tools available.
64
TECHNICAL SPECIFICATIONS
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
SCHEMA
427
65
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON PREMIUM
STANDARD INSTRUMENT
1)
Not included in version HPD-B. Touch screen replaced by a regular TFT screen.
CODE NUMBERs
1)
HPD-B: With TFT screen, no adjustable support.
66
APPLICATIONS
HPD: Checking of thread ring gauges Checking of thread plug gauges (HPA- Checking of external micrometers
(TA-SU-313 / LABC-70 / TA-SU-354) 1 / TEL6 / 3P / 0.17-3.2 / S6.5 / LABC-15) (HPA-1 / TULM14)
Checking of snap gauges Checking of dial indicators (TEL5CN) HPD: Checking of taper thread ring
(TA-SU-313 / TEL14N) gauges (LABC80)
67
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
HORIZON PREMIUM
APPLICATIONS
Setting of 2-point internal micrometers Checking of depth gauges HPA: Checking of thread ring gauges
(HPA-1 / TELMA7 / TELMN7.2) (TEL5 / TULM19) (TEL18)
68
THV
69
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
THV
introduction
The horizontal THV instrument has been designed for calibra-
tion and certification of gauging equipment of small dimension.
Due to its small size, The THV can be moved easily. It is there-
fore frequently used as mobile calibration station.
70
DESCRIPTION
Display units:
Heidenhain ND1100
PC with TRIMOS-WinDHI
software
71
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
THV
display / software
Display unit Heidenhain ND1100
TECHNICAL SPECIFICATIONS
THV
Absolute measuring range mm (in) 50 (2)
Application range (external measurements) mm (in) 100 (4)
Application range (internal measurements) mm (in) 100 (4)
Max. permissible errors 1)
µm 0.2+ L (mm)/250
Repeatability (2s) 1)
µm 0.1
Resolutions (depending on display unit) mm (in) 0.1 ÷ 0.00001 (.0001 ÷ .000001)
Measuring force (adjustable) N 0÷4
Operational temperature °C +10 ÷ +40
Temperature of storage °C -10 ÷ +40
Weight kg 22
1)
Instruments with integrated measuring system. Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
72
SCHEMA
50÷100 232
172
157
447
110
99
STANDARD INSTRUMENT
CODE NUMBERS
73
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
THV
Applications
Calibration of plain and threaded Calibration of plain rings gauges Measuring of precision parts
plug gauges using the floating table (THV-260) (THV-100 / THV-101)
(THV-115)
Checking of test indicators Adjustable support for a constant Floating table for more accurate
(THV-100 / THV-150 measuring force (THV-200) internal measurements
74
LABCONCEPT
+ Premium
75
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT + Premium
introduction
The Labconcept and Labconcept Premium are high precision
calibration systems that meet the most sophisticated require-
ments.
76
DESCRIPTION
PC with TRIMOS-WinDHI
software for all required
measuring functions
77
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT + Premium
display / software
TRIMOS WinDHI
TRIMOS® WinDHI Software allows the performance of all
required measuring functions. It can be connected to the
temperature compensation software WinComp and to any
gauge inspection and management program.
QMSOFT
Trimos recommends the QMSOFT software package for in-
spection and management of all measuring tools available.
78
display / software
TEMPERATURE COMPENSATION SYSTEM TRIMOS TEMPCOMP
The Temperature Compensation System TempComp gives a
solution to air conditioning problems in measuring laboratories.
TempComp Premium
PART TO BE MEASURED
3 TEMPERATURE SENSORS:
A PART TO BE MEASURED
B MEASURING CARRIAGE
C INSTRUMENT BASE
79
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT + Premium
display / software
TempComp Advanced
The environnement control system TempComp Advanced
represents an evolution of the temperature compensation
system TempComp.
TempComp Advanced
Application range (temperature) °C +16 ÷ +24
Max. resolution (temperature) °C 0.01
Max. permissible errors (instrument temperature) °C 0.05
Max. permissible errors (environmental temperature) °C 0.16
Max. permissible errors (humidity) % ±2
Max. permissible errors (pressure) mbar ± 0.5 %
80
TECHNICAL SPECIFICATIONS
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
SCHEMA
427
81
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT + Premium
STANDARD INSTRUMENT
1)
Not included in versions LABC-B. Touch screen replaced by a regular TFT screen.
CODE NUMBER
82
APPLICATIONS
Calibration of ring gauges Calibration of plug gauges Calibration of small ring gauges
(TA-SU-313 / TEL16.1 / HPA-1) (HPA-1 / TULM6 / L05 / LABC-15) (TA-SU-313 / LABC-70 / TA-SU-354)
Calibration of thread ring gauges Calibration of thread plug Calibration of external micrometers
(TA-SU-313 / LABC-70 / TA-SU-354) gauges (HPA-1 / TEL6 / 3P / 0.17- (HPA-1 / TULM14)
3.2 / S6.5 / LABC-15)
Comparative checking of gauge Comparative checking of gauge blocks Setting of 2-point internal micrometers
blocks < 250 mm (TA-SU-313 / TA- > 250 mm (TA-SU-313 / TELMA7 / P / TA- (HPA-1 / TELMA7 / TELMN7.2)
SU-305) SU-305 / TA-SU-306)
83
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT + Premium
APPLICATIONS
Checking of dial indicators (TULM5C) Checking of test indicators (TULM15) Checking of snap gauges
(TA-SU-313 / TEL14N)
Temperatue compensation system Checking of taper thread ring gauges Special design for measurement of
TempComp (HPA-1 / LABC80) large taper threaded gauges
84
LABCONCEPT
Nano
85
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT Nano
introduction
No compromise on accuracy
The Labconcept Nano is a new reference in the field of di- UNEQUALLED HIGH LEVEL OF ACCURACY
mensional metrology. It integrates 40 years of knowledge
EXCEPTIONAL REPEATABILITY
and continuous improvement. It is a remarkable instrument
for all measuring tasks that require extremely high accuracy. MOTORIZED MEASURING CARRIAGE, X AXIS,
SELECTION OF SPEED BY SOFTWARE
The uncompromising design of the Labconcept Nano offers MOTORIZED UNIVERSAL MEASURING TABLE, CNC Y
an ideal and performing platform for checking and calibration AND Z AXIS WITH INTEGRATED MEASURING SYSTEM
of all kinds of gauges and measuring instruments. Checking
of internal and external dimensions will be done as a fully MEASURING FORCE (0-12N) AND LOCKING OF
MEASURING ANVIL PERFORMED BY SOFTWARE
automatic procedure by the three motorized axes XYZ and
the legendary simplicity of use of Trimos WinDHI software. INTEGRATED TEMPERATURE COMPENSATION SYSTEM
ABSOLUTE MEASURING RANGE ON
The Labconcept Nano is completely designed and manufac- ALL MODELS : 350 MM
tured in Switzerland according to the highest quality standards.
Robustness, reliability and longevity are our traditional values. APPLICATION RANGES OF 350, 600 AND 1100 MM
MEASURING OF PARTS UP TO 60 KG IN WEIGHT
A New Technological Dimension
2 SCREENS IN THE STANDARD PACKAGE
The Labconcept Nano combines tradition, experience and
a strong technological lead. It integrates the latest measur- CNC CONTROLLED MEASUREMENTS EVEN ON
ing and motorisation technologies and can be considered DIAMETERS AND THREADS
as the first “full digital” calibration instrument. A regular PC
controls all electronic components. This low-power solu-
tion avoids heating and keeps the energy, maintenance and
repair costs at a reasonable level. The linear bearings used
in all guideways have proven their superiority over all other
technologies in terms of precision, wear, rigidity, temperature
stability, reliability, dust protection and maintenance. They
ensure exceptional repeatability and precision through time.
86
DESCRIPTION
Ergonomic and
compact Workbench
87
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT Nano
display / software
TRIMOS WinDHI Nano
Trimos Win DHI Nano is the exclusive measurement software
of Trimos. It is part of the basic equipment of the Labconcept
Nano and allows the performance of all measuring functions.
It helps the user to perform all measurement tasks through a
user-friendly interface.
Positioning can be done easily using the mouse and the key-
board or via the touch screen (optional) or a joystick
(optional). Once positioned, measurements are entirely CNC
controlled, including searching the reversal point. Plug and
ring gauges, threaded ring and plug gauges etc. can be mea-
sured automatically in a few seconds. No risk of damage to
the sensitive probes while moving or measuring, even with
tiny parts and inserts.
TRIMOS WINCOMP
The Labconcept Nano is equipped as standard with a tem-
perature compensation system Trimos WinComp allowing
the acquisition and management of temperature data.
88
display / software
QMSOFT
Trimos recommends the QMSOFT software package for in-
spection and management of all measuring tools available.
TECHNICAL SPECIFICATIONS
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
2)
Both axes Y and Z have an integrated measuring system.
89
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT Nano
SCHEMA
STANDARD INSTRUMENT
CODE NUMBERS
90
APPLICATIONS
Calibration of plain ring gauges Calibration of small plain ring gauges Calibration of thread ring gauges
(TEL16.1 / TA-SU-354) (TA-MS-370 / TEL76 / TA-SU-354) (TA-MS-370 / TEL75 / TA-SU-354)
Calibration of plug gauges Calibration of thread plug gauges Comparative checking of gauge blocks
(TULM6 / L05 / TA-SU-315) (3P / 0.17-3.2 / S6.5 / TA-SU-315) > 250 mm (TA-SU-307 / TEL7 / TELMA7)
Calibration of gauge bars Checking of taper thread ring gauges Checking of taper thread plug gauges
(TELMA7 / TELMN7.2) (TA-MS-381 / TEL75) (TA-MS-381 / TEL75)
91
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
LABCONCEPT Nano
APPLICATIONS
Integrated temperature compensation CNC controlled internal taper ring CNC controlled external taper ring
system TempComp measurement measurement
CNC controlled internal measurement CNC controlled external Calibration of a specific gauge
of a bearing ring measurement of a bearing ring
92
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TELS50 Pair of measuring anvils Ø 6.5 mm • •
42 609 05 044
Ø6,5
Ø8
42
SP609 05 048 01
SP609 05 044 01
Ø6,5
42
93
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TA-MI-315 Ball probe Ø 3.70 mm
279 901008 015
• •
TA-MI-316 Ball probe Ø 4.00 mm
279 901008 016
• •
TA-MI-317 Ball probe Ø 4.50 mm
279 901008 017
• •
TA-MI-318 Ball probe Ø 5.00 mm
279 901008 018
• •
TA-MI-319 Ball probe Ø 5.50 mm
• •
Ø3,5
15,5
TA-MI-320 Ball probe Ø 6.00 mm
279 901008 020
• •
TA-MI-321 Ball probe Ø 6.50 mm
279 901008 021
• •
TA-MI-322 Ball probe Ø 7.00 mm
279 901008 022
• •
TA-MI-323 Ball probe Ø 8.00 mm
279 901008 023
• •
TA-MI-324 Ball probe Ø 9.00 mm
279 901008 024
• •
TA-MI-325 Ball probe Ø 10.00 mm
279 901008 025
• •
609 05 017
160
•
Ø20
• • • • • •
Ø
94
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TEL6/6.8 Pair of anvils Ø 6.8 mm
609 05 080
• • • • • •
TEL6/8 Pair of anvils Ø 8 mm • • • • • •
609 05 081
Ø
86
121
TEL5E Pair of parallel attachments 1" • • • • •
609 05 102
30
SP609 05 070 01
15
95
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
15
H
H
15
609 05 033
20
20
THV-11 Pair of inserts for internal meas. •
26
20
20
22
24
96
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TEL16.2 Pair of L-shaped probes, • • • •
609 05 089 H=40 mm, L=55 mm
H
L
TEL16.3 Pair of L-shaped probes, • • • •
609 05 097 H=70/45 mm, L=65mm
97
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TEL76.2 Measuring insert with ruby ball • • • •
509 05 20 0018 Ø0.5 mm
98
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TELS51 Holder for measuring inserts M2.5 • •
509 05 20 0027
42
Ø6,5
60
TEL15 Pair of holders for measuring inserts • • • • • •
609 05 098 Ø 3.5 mm
147
SP609 05 089 02
55
99
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TA-MS-370 Electronic probe for internal measure- •
706 203 02 ment, (with support, without interface)
TELS5.1 Plate •
602 33 004
602 39 005
100
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
Pair of vertically adjustable supports,
TELMA7/SP04
Adjustment range Z=240 mm, • • • • •
602 39 012
standard plate
Pair of vertically adjustable supports,
245 TELMA7/SP05
Adjustment range Z=240 mm, • • • • •
602 39 013
U-shaped Plate
175
709 40 018
224,5
H-6 Support for plug gauges •
144
603 00 007
101
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TA-SU-315
Measuring table for plug gauges •
<Ø100 x 280 mm, with self centring
709 40 040
clamp and alignment screws
Nano-15.1
Measuring table for plug gauges •
<Ø100 x 280 mm, without self centring
609 40 040
clamp and alignment screws
H-15
Measuring table for plug gauges •
<Ø100 x 280 mm, with self centring
709 40 036
clamp and alignment screws
H-15.1
Measuring table for plug gauges •
<Ø100 x 280 mm, without self centring
609 40 036
clamp and alignment screws
HG-15
Measuring table for plug gauges •
<Ø100 x 280 mm, with self centring
709 40 037
clamp and alignment screws
HG-15.1
Measuring table for plug gauges •
<Ø100 x 280 mm, without self centring
609 40 037
clamp and alignment screws
92
LABC-15.2 Self centring clamp • • • • • •
136
706 04 001
102
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
69
TELMN7.2/ V-shaped roll for cylindrical parts
SP02 • • • • •
23
613 07 006
69
TELMN7.2/ Roll for Easy-Metric gauges
SP03 • • • • •
Ø23
613 07 007
69
TELMN7.2/ Cylindrical roll
SP04 • • • • •
Ø23
613 07 008
103
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
123
612 12 023
Ø
612 12 022
252
THV-180 Micrometer spindle for checking of •
606 25 008 dial indicators
4
104
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
75
TEL14.1 Pair of clamping attachments • • • • • •
606 00 004 H<40 mm
• • • • • •
H
According to type
Specific adapter for 2-point bore •
gauges
TA-SU-451
Adapter set for external micrometers •
279 906001 028
105
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
Universal adapter for 2-points bore
TA-SU-401
gauges, (to be mounted on mobile •
279 906001 051
probe)
25
TELS3.1C Extension for dial indicator, 25 mm •
M2.5
102
124,3
THV-181E Holder for checking dial indicators, •
601 01 001 Ø 3/8"
106
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
L
TEL76.6 Extension for ball and T-shaped • • •
501 04 20 0001 probes, L=7.5 mm
Ø4
• • •
Ø8,5
8 6
26
TELS3C Clamping sleeve for dial indicators •
603 12 002 Ø 8 mm
12
Ø
260
TULM30.1 Support for display unit Heidenhain • •
612 05 002 ND287
379
107
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TELA05A/H700 Support for HG2000, H=700 mm •
303 602 13 004
602 13 006
108
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TULM50D.EXT Master plug gauge Ø 50 mm with • • • • • •
709 201 01 SCS certificate
TA-TO-301
Lapping plate • •
514 02 20 0001
TA-TO-303
Set of abrasive oil for probe lapping • • • • • • • •
740 05 101
109
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
EL-D80S Display unit SYLVAC D80S • •
351 292 0011
TA-EL-040 Joystick •
358 0020
110
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
V-30 Printer (RS232) •
356 0007
BAT-TVM. Battery • • •
OPTO
3705 0002
111
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
ACCESSOries
LABC + P
ALESTA
LABCN
TELS
HPD
HPA
THV
HG
H
TA-SW-001 Software for data transfer WinDDE • • • •
394 1 0050
112
TWINNER
113
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TWINNER
introduction
TWINNER is a universal instrument for the measurement of
cylinder-shaped parts, which replaces a great number of con-
ventional instruments in the workshop. This measuring centre,
multifunctional, flexible and mobile, allows to measure and
document practically all that is manufactured by turning.
EXCELLENT REPEATABILITY
VERY FAST CHANGE OF PART
EASY CALIBRATION
COMPLETE SELECTION OF ACCESSORIES
114
DESCRIPTION
Pitch
Display unit
Centring pike
Length Diameter
measuring module measuring module
115
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TWINNER
display / software
The Twinner instruments are controlled by a PC system with
different hardware and software modules:
• TWINNER master-easy
• TWINNER master-pro
• TWINNER premium-easy
• TWINNER premium-pro
Hardware
Master:
Without encoder, diameter module with 1
measuring system
Premium:
With encoder, diameter module with 2
measuring systems
Software
116
display / software
TWINNER Soft Pro
For better comfort and more functionality, the TWINNER can
be equipped with TWINNER soft Pro. This modern SPC sys-
tem offers unbeatable value for money. Its flexibility makes it
adaptable to the most diverse measuring situations.
117
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TWINNER
TECHNICAL SPECIFICATIONS
1)
Values valid at temperature of 20 ± 0.2 °C and relative humidity of 50 ± 5%.
SCHEMA
75
459 / 630
249 / 370
STANDARD INSTRUMENT
118
CODE NUMBER
Twinner PC equipment
T4 Master-Easy 700 215 10 12 Twinner T4 without encoder, 1x Diameter-Modul, free measurement
T4 Master-Pro 700 215 10 13 Twinner T4 without encoder, 1x Diameter-Modul, Sequences
T4 Premium-Easy 700 215 10 14 Twinner T4 with encoder, 2x Diameter-Modul, free measurement
T4 Premium-Pro 700 215 10 15 Twinner T4 with encoder, 2x Diameter-Modul, Sequences
T8 Master-Easy 700 215 20 12 Twinner T8 without encoder, 1x Diameter-Modul, free measurement
T8 Master-Pro 700 215 20 13 Twinner T8 without encoder, 1x Diameter-Modul, Sequences
T8 Premium-Easy 700 215 20 14 Twinner T8 with encoder, 2x Diameter-Modul, free measurement
T8 Premium-Pro 700 215 20 15 Twinner T8 with encoder, 2x Diameter-Modul, Sequences
T12 Master-Easy 700 215 30 12 Twinner T12 without encoder, 1x Diameter-Modul, free measurement
T12 Master-Pro 700 215 30 13 Twinner T12 without encoder, 1x Diameter-Modul, Sequences
T12 Premium-Easy 700 215 30 14 Twinner T12 with encoder, 2x Diameter-Modul, free measurement
T12 Premium-Pro 700 215 30 15 Twinner T12 with encoder, 2x Diameter-Modul, Sequences
T20 Twinner T20 (on request, other models T16, T25, etc.)
The models above are supplied with granite base and PC for corresponding mea-
suring systems and software. Diameter modules, length modules, measuring in-
serts, location centers etc. must be selected separately from the accessory list.
SPECIFIC MODELS
Trimos offers specific solutions adapted to all applications for measurement of
cylinder-shaped parts and revolving parts. For more information, your local Trimos
agent remains at your disposal.
119
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
TWINNER
APPLICATIONS
Measurement of rack rail teeth Diameter measurement on a camshaft Diameter measurement in a groove
inclination (specific design)
Positions measurement Installation for eccentric diameter Length measurement for large parts
(specific design) measurement (specific design) (specific design)
120
ACCESSOries
Twinner
TA-MI-501 Insert for diameters - Knive-shaped •
279 953322 251
•
TA-IH-510 Insert for length, Ø=4/8 mm without probe
279 953322 273
121
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
Twinner
ACCESSOries
Twinner
TA-MS-504 Diameter module Ø<160 mm, •
275 953322 209 without probe, 2 measuring systems
122
ACCESSOries
Twinner
TA-SU-523 Rotary anvil 60°/D=18 mm •
249 953322 069
•
TA-SU-515 ZP-fixed location centers 60°/D=18mm long
249 953322 056
123
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
Twinner
ACCESSOries
Twinner
TA-SU-532 WST-adjustable V D=18 mm-60 mm •
249 953322 103
124
ACCESSOries
Twinner
TA-AD-501 Revolver system for L-Modul •
279 953322 242
125
TRIMOS | HORIZONTAL MEASURING INSTRUMENTS
Twinner
ACCESSOries
Twinner
TA-AD-505 Protection for HM-Knife Probe •
279 953322 274
126
TR Profile
+ DH-8
127
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR Profile + DH-8
introduction
The TR Profile and TR Profile DH-8 are extremely precise sur-
face roughness measuring instruments, built for the use in
the workshop and on production lines as well as in the lab.
128
DESCRIPTION
Interchangeable Tracers
With skid: version VH
With and without skid: version VHF
Traversing Unit
integrated in the instrument, can also
be connected with a cable to the ins-
trument for measurement with stand
or to reach difficult measuring points
Integrated Printer
For parameters,
Profiles and bearing ratio
Interchangeable Tracers
With skid: version VH
With and without skid: version VHF
129
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR Profile + DH-8
display / software
TR Profile
Extremely simple and intuitive use. Only 4 buttons to access
to all functions.
Parameters :
ISO/DIN: Ra, Rz (DIN), Rmax, R3z, Rt, Rq (RMS), Rk, Rp, Rv,
Rpk, Rvk, MR1, MR2, Rpc, C1, C2, bearing ratio Rmr, C0, Cz
JIS: Ra (JIS), Rz (JIS)
ISO 12085: R, AR, Rx
TR Profile DH-8
Multifunctional and polyvalent measuring instrument for
roughness and contour measurement.
Parameters :
ISO/DIN: Ra, Rz (DIN), Rmax, R3z, Rt, Rq (RMS), Rk, Rp, Rv,
Rpk, Rvk, MR1, MR2, Rpc, C1, C2, bearing ratio Rmr, C0, Cz
JIS: Ra (JIS), Rz (JIS)
ISO 12085: R, AR, Rx
CONTOUR MEASUREMENTS
MENUS IN 6 DIFFERENT LANGUAGES
130
display / software
Software DIASOFT
DIASOFT is a multilingual software that gives the opportunity
to further improve the DIAVITE possibilities. This software will
work out an even greater number of roughness parameters
and will be a help for the memorization and the presention
of your measurements protocols. All measured values can be
analysed and compared. The software most adapted to your
needs will doubtlessly be found among the 4 existing versions :
• Standard (TA-SW-602)
Same as «Basic», additionally with RLq, Rlo, RzJIS, R3z,
waviness and roughness profile on the same curve, zoom
functions, symmetry, comparison of profiles etc. Proto-
cols can be customized individually.
• Automotive (TA-SW-603)
Same as «Standard», additionally with ISO 12085 (CNO-
MO), ISO 13565, (parameter Rk)
• Expert (TA-SW-604)
Same as «Automotive», additionally with analysis of series
of profiles and a lot more features for surface analysis. The
most complete offer for the specialist, now and in the future.
MEASUREMENT OF CONTOURS
The TR Profile DH-8/VHF now offers the possibility, as an option, to precisely mea-
sure contours. For this purpose, a special contour measuring tracer is needed, in
combination with a specific software module.
The softwares DIASOFT Standard, Automotive and Expert can be equipped with
the following modules:
• Contour module Simple (TA-SW-610)
• Contour module Advanced (TA-SW-611)
131
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR Profile + DH-8
TECHNICAL SPECIFICATIONS
DIAGRAM 245
TR PROFILE
TRIMOS
Lc
M
R
Lt
M
132
R
P
74
CODE NUMBER
TR Profile TR Profile DH-8
TR Profile VH 700 401 10 01 TR Profile DH-8/VH 700 401 10 51 For tracers with skid
TR Profile VHF 700 401 10 02 TR Profile DH-8/VHF 700 401 10 52 For tracers with and without skid
TR Profile DH-8/VHF-CP-S 700 401 10 61 Set for contour measurements Simple
- TR Profile DH-8/VHF
- Contour tracer (TA-MS-650)
- Contour standard (TA-MG-651)
- Software DIASOFT Standard (TA-SW-602)
- Contour module Simple (TA-SW-610)
TR Profile DH-8/VHF-CP-A 700 401 10 62 Set for contour measurements Advanced
- TR Profile DH-8/VHF
- Contour tracer (TA-MS-650)
- Contour standard (TA-MG-651)
- Software DIASOFT Standard (TA-SW-602)
- Contour module Advanced (TA-SW-611)
133
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR Profile + DH-8
APPLICATIONS
Checking of surface roughness near a Measurement in small bores Measuring surface roughness of a
shoulder (TA-MS-601) (TA-MS-605) polished part (TA-MS-607)
Checking at recessed measuring Checking of thread profile roughness Checking in a recess using an
points (TA-MS-609) of a thread plug gage (TA-MS-620) appropriate probe (TA-MS-608)
Radial roughness measurement Transversal flank measurement Contour measurement with TR Profile
(TA-MS-621) (TA-MS-627) DH-8/VHF (TA-MS-650)
134
TR SCAN
135
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR SCAN
introduction
The TR Scan offers an innovative alternative to classical sur-
face measurement. Its modular concept, allowing adaptation
to each application, and its simple use, make it very efficient
in the workshop. Because of its simplicity of use, the TR Scan
can be operated by workshop personnel to get reliable re-
sults secured with minimum training. All measured surfaces
can be treated according to current international standards
such as ISO, DIN, JIS, ASME, CNOMO etc., as well as the
upcoming ISO 25178 3D standard.
136
DESCRIPTION
TR SCAN
display / software
Trimos Nanoware Measure
This exclusive software allows the handling of the instrument
(positioning and configuration of all measurements).
INTUITIVE POSITIONING
INSTANT MEASUREMENT
PROGRAMMABLE MEASUREMENTS WITH PICTURE
POWERFUL ANALYSIS
PROFESSIONAL REPORTING
SUITABLE MODULE FOR EACH APPLICATION NEED
COMPLIES TO ALL INTERNATIONAL STANDARDS
138
THE CCM TECHNOLOGY
Chromatic Confocal Microscopy (CCM) has been acknowl-
edged worldwide as an accurate and reliable technique for W
non-contact surface measurement. A chromatic lens L gener-
ates the image of a point white-light source W as a continuum
of monochromatic images located on the optical axis (“Chro- P
matic coding”). A sample O is located inside the color-coded
segment and its surface scatters the incident light beam. The S
backscattered light passes through the chromatic lens L in
the opposite direction, and arrives at a pinhole P which filters
out all wavelengths except a single wavelength, λM. The col-
lected light is analysed by a spectrometer S. The sample posi- Ι
tion is directly related to the detected wavelength. λ
λM
• High resolution
• Works on all types of sample materials L
• Wide choice of measuring ranges λ1
• Steep slope compatibility λΜ
• Coaxial (no shadowing) λΝ
• Recognised method by ISO 25178 O
+
CCM-P1 TA-MI-701 ÷ 713
(support & spectrometer) Optical pen
COMPLEMENTARY TECHNOLOGIES
1mm CCM P1
There is no universal technology for surface measurement.
The modularity of the TR Scan allows the use of the best DIA P1
Vertical Z
Lateral XY
139
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR SCAN
MEASURING HEADS
DHM S1 & S2 CCM P1 DIA P1
DHM Technology: Chromatic Confocal Technology: Diamond Stylus Tip Technology:
• Smooth, grinded and polished • Machined and rough surfaces, • Roughness measurement with contact
surfaces micro-structures • Classical roughness
• Steel, aluminium, titanium, silicon, • Metals, plastics, abrasives, papers, measurements (2D)
gold, ceramics, glass textiles, cosmetics • Internal measurements
• High precision and speed, 2D/3D • Large vertical range, all materials,
2D/3D
DHM DIA
S2 P1
TECHNICAL SPECIFICATIONS
1)
Values may differ depending on the surface texture
2)
Objective dependent
140
DIAGRAM 193
698
119.5
505 650
STANDARD INSTRUMENT
CODE NUMBER
The TR Scan can also be specifically equipped according to the needs for each application (head(s) and measuring table, software). An exhaustive list of equip-
ments can be found in the accessories section.
141
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR SCAN
APPLICATIONS
Surface spinning measurement on a Verification of an aluminium ring joint Texture analysis of a chemically
steel printing roll (DHM S2) gasket for the aircraft industry polished titanium surface (DHM S2)
(DHM S2)
142
TR SCAN
PREMIUM
143
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR SCAN PREMIUM
introduction
TR Scan Premium allows the measuring of the most sensi-
tive surfaces with astounding speed and precision. It has
become unavoidable in many cases for hi-tech applications,
when the traditional measuring by contact has reached its
limits. Medical appliances, prosthesis, wafers, MEMS, semi-
conductors, metallic layers deposits, polymer films, optical
components, research and development, quality control, are
the areas of expertise of TR Scan Premium.
144
DESCRIPTION
TR SCAN PREMIUM
display / software
Trimos Nanoware Measure
This exclusive software allows the handling of the instrument
(positioning and configuration of all measurements).
INTUITIVE POSITIONING
INSTANT MEASUREMENT
PROGRAMMABLE MEASUREMENTS WITH PICTURE
POWERFUL ANALYSIS
PROFESSIONAL REPORTING
SUITABLE MODULE FOR EACH APPLICATION NEED
COMPLIES TO ALL INTERNATIONAL STANDARDS
146
THE DHM TECHNOLOGY
DHM® (Digital Holographic Microsco- • Phase images providing quanti tative • Acquisition in a few microseconds
py) is a non-contact surface measure- data, defined at a sub-wavelength • Vibration incensitive
ment technology originally developed scale, used for accurate and stable • High image quality
for the biotech and medical industry. 3D measurements. • Subnanometric resolution
DHM generates a high-resolution 3D • No moving parts
digital image of a sample using the The phase image reveals the surface • No requirement for special environ-
principle of holography. A hologram topography with a sub-nanometric ver- mental conditions
generated by combining a coherent tical resolution. This digital approach
reference wave with the wave received to holography allows the application of DHM is a recognized surface texture
from a sample is recorded by a CCD computer-based procedures at a level measurement method according to the
camera and transmitted to a computer never reached in optical microscopy so standard ISO 25178-6
for numerical reconstruction. far. In particular the DHM principle fea-
tures software compensation of optical
A single hologram is acquired in a few aberrations, digital image focusing and
microseconds, making the whole sys- numerical compensation for sample tilt
tem insensitive to vibrations. Software and environmental disturbances, mak-
procedures allows computation of the ing DHM instruments robust and easy
complete wavefront emanating from an to use for routine inspections at the
object and provides: nanometer and micrometer scale.DHM
is used exclusively by Trimos for surface
• Intensity images providing the same texture measurement. This technology
contrast as with classical optical mi- has numerous advantages compared
croscopy to other contact and non-contact mea-
surement technologies: in particular
extremely fast measurements, high
resolution, simple working process no
moving parts and no requirement for
special environmental conditions.
147
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR SCAN PREMIUM
MEASURING HEADS
DHM S1 & S2 CCM P1 DIA P1
DHM Technology: Chromatic Confocal Technology: Diamond Stylus Tip Technology:
• Smooth, grinded and polished • Machined and rough surfaces, • Roughness measurement with contact
surfaces micro-structures • Classical roughness
• Steel, aluminum, titanium, silicon, • Metals, plastics, abrasives, papers, measurements (2D)
gold, ceramics, glass textiles, cosmetics • Internal measurements
• High precision and speed, 2D/3D • Large vertical range, all materials,
2D/3D
DHM DIA
S2 P1
TECHNICAL SPECIFICATIONS
1)
Values may differ depending on the surface texture
2)
Objective dependent
148
DIAGRAM
193
698
119.5
505 650
STANDARD INSTRUMENT
CODE NUMBER
TR Scan Premium can also be specifically equipped according to each application need (head(s) and measuring table, software). An exhaustive list of equip-
ments can be found in the accessories section.
149
TRIMOS | SURFACE ANALYSIS INSTRUMENTS
TR SCAN PREMIUM
APPLICATIONS
150
ACCESSOries
TR Profile DH-8 VH
TR Scan Premium
TR Profile VHF
TR Profile VH
TR Scan
TA-MI-701 Optical pen, with optical fiber and certificate, • •
279 970000 001 measuring range=130 μm,
lateral resolution=0.9 μm
151
TRIMOS | HEIGHT GAUGES
TR Profile DH-8 VH
TR Scan Premium
TR Profile VHF
ACCESSOries
TR Profile VH
TR Scan
TA-MS-602 Probe for small axes, knives, edges and wires • • • •
279 980001 002 with skid R=25 mm
152
TR Profile DH-8 VH
TR Scan Premium
TR Profile VHF
ACCESSOries
TR Profile VH
TR Scan
TA-MS-624 Transverse probe for bores, • • • •
279 980007 003 with skid R=25 mm
22
TA-MS-626 Transverse probe left side, without skid • • • •
279 980007 004
15
153
TRIMOS | HEIGHT GAUGES
TR Profile DH-8 VH
TR Scan Premium
ACCESSOries
TR Profile VHF
TR Profile VH
TR Scan
CCM-P1 Measuring head CCM P1 • •
709 70 005
154
TR Profile DH-8 VH
TR Scan Premium
ACCESSOries
TR Profile VHF
TR Profile VH
TR Scan
TA-SU-609 Support plate for vice TA-SU-606 • • • • • •
297 700005 001
TA-EL-040
Joystick • •
358 0020
155
TRIMOS | HEIGHT GAUGES
TR Profile DH-8 VH
TR Scan Premium
TR Profile VHF
TR Profile VH
ACCESSOries
TR Scan
LABC-40 Laser printer (USB) • •
356 0010
156
Nanoware PRO Complete module for profiles and surfaces Nano- • •
616 60 014 Ware PRO, Roughness software 3D - Professional