Professional Documents
Culture Documents
* Register at www.morphyrichards.co.uk/support
UK and Ireland customers only
Contents
Health and safety ............................................................................. 2
Electrical requirements .................................................................... 3
Steam generator overview / Features ............................................. 4
Control panel overview .................................................................... 5
Temperature guide ........................................................................... 5
Before first use ................................................................................ 6
Location ............................................................................................ 6
Using the steam generator for steam ironing ................................. 6&7
Steam boost .................................................................................... 8
Features ............................................................................................ 8
Maintenance ..................................................................................... 9
Emptying and storing ....................................................................... 10
Contact us ........................................................................................ 10
Troubleshooting .............................................................................. 11
Guarantee ......................................................................................... 12
3
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 4
4 6
5 7
8 12 13 14 15 16
9
10
17
11 18
19 20
21 22 23 24
(1) Iron handle (9) Water tank handle (17) Control panel (see page 5)
(2) Cable pivot (10) Water tank release button (18) Base unit
(3) Steam trigger (11) Detachable water tank (19) Cord storage groove
(4) Temperature dial (12) Iron-to-base locking hook (20) Cord clamp
(5) Soleplate (13) Iron-to-base locking button (21) Hex key
(6) Temperature indicator light (14) Iron release button (22) Boiler key
(7) Iron heel (15) Iron rest plate (23) Boiler screw
(8) Filling cap (16) Iron rear docking hook (24) Boiler cap
4
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 5
Descaling indicator light (25) Low water level indicator light (29)
When the system requires cleaning, the descaling If the water level is too low, the low water level
indicator light (25) will illuminate. indicator light (29) will illuminate. See ‘Removing
and filling the water tank’ on page 6.
Steam level buttons (28/32)
Press the relevant button to select either Eco On/Off button (31) and
steam (28) or Turbo steam (32). The steam level Power indicator light (26)
selected will be displayed by illumination of the Connect to a mains outlet and press the On/Off
relevant steam level indicator light: Eco (27), or Button (31). The power indicator light (26) will
Turbo (30). See step 5 of ‘Using the Steam illuminate and the Eco steam indicator light (27)
Generator for steam ironing’ on page 7. will flash. To turn off, press and hold the On/Off
button (31) for 3 seconds.
Temperature guide
The steam generator is equipped with IntelliTemp technology, which means it is safe to use on all ironable
fabrics without adjusting the temperature setting.
Do not use on fabrics that have the ‘Do Not Iron’ Symbol.
For stubborn creases, a MAX setting is available.
Symbol Do not iron
5
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 6
Location
Locate the steam generator horizontally on the iron rest plate of your ironing board (if large enough) or on
a heat resistant stand at the same height as your ironing board or below it. Always ensure the steam
generator is on a firm surface when ironing.
WARNING: Do not use the product on a surface which could be damaged by heat or steam such as
a worktop or a polished wood surface.
If in doubt, contact Morphy Richards.
When steam ironing, remove the detachable Plug the appliance into a mains outlet, you will
water tank (11), lift the filling cap (8), and fill with hear a beep. Press the On/Off button (31), it will
water to the max fill line. Replace the water tank. beep again and the power indicator light (26)
IN HARD WATER AREAS, WE RECOMMEND A will illuminate and the Eco steam indicator light
MIX OF 50% TAP WATER AND 50% DISTILLED, (27) will flash.
DEIONISED OR DEMINERALISED WATER.
Never use battery topping up fluid or water
containing any substances like starch, sugar,
fragrant additives or defrosted water from a
refrigerator.
NOTE: Please see point 2 of ‘Exclusions’ on page 12.
Re-filling during use
If the water level is too low, the low water indicator
will illuminate and the unit will not produce steam.
If this happens, refill the detachable water tank
(11) with water.
6
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 7
14
Turn the temperature dial (4) to either IntelliTemp Unlock the iron from its storage position on top
or MAX (see ‘Temperature guide’ on page 5). of the base unit (18) by pressing and holding the
The temperature indicator light (6) illuminates iron release button (14) (marked with a padlock
until the temperature is reached. Begin ironing icon) - this enables you to rotate the tip of the
when the temperature indicator light goes out. If soleplate (5) (in a clockwise direction) out from
you turn the temperature dial down from MAX to under the iron-to-base locking hook (12) and lift
IntelliTemp, wait until the temperature indicator the iron heel (7) away from the rear docking
light illuminates and then goes off again. hook (16).
WARNING: To avoid burning yourself if the
soleplate is still hot, never press down on the
iron-to-base locking button (13) to unlock the
iron.
During use, the iron may be rested on the iron
rest plate (15) with the soleplate tip on top of the
iron-to-base locking hook (12) and the heel
slotted on to the rear docking hook.
Press the relevant button to select either Eco When you have finished ironing, turn off the
steam (28) or Turbo steam (32). The selected appliance by pressing and holding the On/Off
steam level will be displayed by illumination of button (31) for three seconds. A beep will be
the relevant steam level indicator light. The heard and the power indicator light (26) and
steam level indicator light will stop flashing and steam level indicator (27/30) will be
illuminate constantly when the selected steam extinguished.
level is reached. Disconnect the plug from the mains outlet.
WARNING: The steam supply cord will get
hot during use.
7
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 8
Steam boost
The steam boost function is ideal for relaxing the
fibres of tougher fabrics (like jeans and linen) and
3 getting rid of those stubborn, hard to reach creases.
To activate the steam boost, simply press the steam
trigger (3) twice in quick succession. To turn this off,
press the steam trigger again.
8
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 9
9
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 10
10
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 11
Troubleshooting
Problem Solution
• No power or not heating up. 1. Check the fuse and the fuse rating (should be 13amp).
2. Try a different appliance in the socket as it may be the socket that is
at fault.
3. Check that the auto shut off has not operated.
4. Ensure the iron is switched on by pressing the On/Off power button.
• Overheating or not getting 1. Adjust the temperature dial to ensure the setting matches that
hot enough. recommended on the garment or refer to the “temperature guide”
section.
2. Allow the iron to reach temperature and stabilise for 1-2 minutes if
it has just been plugged in, or has just been woken up from auto
shut off.
• Not steaming or poor steam. 1. Check that there is enough water in the tank.
2. If the iron’s auto shut off feature has activated, wake up the iron and
allow it to reach temperature before using steam.
• The product occasionally 1. This is normal and is caused by water being pumped through the
produces a pumping sound steam pump. The pump is controlled by the unit automatically to
during steam ironing. keep the boiler up to pressure.
• Dripping from the holes in 1. The steam level should be set lower if the temperature is set lower
the soleplate. (refer to the “temperature guide” section) to prevent it from dripping.
2. If the iron’s auto shut off feature has activated, wake up the iron and
allow it to reach temperature before using steam.
• The descale indicator stays 1. The descale indicator will extinguish only after the boiler has been
ON. thoroughly cleaned properly.
2. Ensure the boiler is completely empty before replacing the boiler
screw.
• Continuously steaming. 1. The steam boost may be activated. Press the steam trigger on the
iron once to deactivate.
11
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 12
Please note that the 2 year guarantee is only available in 6 The appliance has been used for hire purposes or non
the UK and Ireland. Please refer to the 1 year guarantee domestic use.
for more information. 7 The appliance is second hand.
8 Morphy Richards reserves the right not to carry out any
Your 1 year guarantee type of servicing under the guarantee at its discretion.
It is important to retain the retailer’s receipt as proof of • This guarantee does not confer any rights other than those
purchase. Staple your receipt to this back cover for future expressly set out above and does not cover any claims for
reference. consequential loss or damage. This guarantee is offered
as an additional benefit and does not affect your statutory
Please quote the following information if the product rights as a consumer. Morphy Richards products are
develops a fault. These numbers can be found on the base intended for household use only. See usage limitations
of the product. within the location safety instructions.
Model no.
Serial no.
All Morphy Richards products are individually tested before Disclaimer
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should Morphy Richards has a policy of continuous improvement
be returned to the place of purchase for it to be replaced. in product quality and design. The company, therefore
If the fault develops after 28 days and within 12 months of reserves the right to change the specification of
original purchase, you should contact the Helpline number its models at any time.
quoting Model number and Serial number on the product,
or write to Morphy Richards at the address shown. For electrical products sold within the
You may be asked to return a copy of proof of purchase. European Community. At the end of the
Subject to the exclusions set out below (see Exclusions), electrical products useful life, it should not be
the faulty appliance will then be repaired or replaced as disposed of with household waste.
appropriate and dispatched usually within 7 working days Please recycle where facilities exist. Check
of receipt. with your Local Authority or retailer for
If, for any reason, this item is replaced or repaired during recycling advice in your country
the 1 year guarantee period, the guarantee on the new
item will be calculated from original purchase date.
Therefore it is vital to retain your original till receipt or
invoice to indicate the date of initial purchase.
To qualify for the 1 year guarantee, the appliance must
have been used according to the instructions supplied.
For example, water should be emptied after each use.