Professional Documents
Culture Documents
Marine Fender
Marine Fender
com
DIPTI
MARINE FENDERS
DIPTI MARINE FENDERS
IRM of fers the widest range of fenders to suit almost all kinds of ber ths and ber thing methods in various
climatic and site conditions. We manufacture the entire range of solid as well as floating (pneumatic, foam-
filled & hydro pneumatic) fenders to accommodate ber thing requirements of the smallest fishing boats to
ULCCs and VLCCs for jet ty as well as ship to ship operations. Our fenders are renowned for their long and
trouble-free service life without deterioration in it’s per formance and characteristics. They are the last
word in reliability and safety and are preferred worldwide where critical applications are envisaged.
Custom-made designs of “DIPTI” fenders of fer greater economy while conforming to the international
specifications and operational requirements. Today, DIPTI is synonymous with the high quality precision
moulded rubber fenders for por ts and harbors.
“DIPTI” fenders are manufactured by compression moulding process at very high pressure up to 2000
tons load, which is much bet ter and advanced technology than the ancient ex trusion process, resulting in
zero porosity / bubble free moulding of fenders. “DIPTI” fenders are manufactured from dif ferent type of
rubber compound according to the ber thing energy requirements & site conditions. These compounds are
made of purest form of natural rubber, high abrasion resistant synthetic rubbers like Neoprene, SBR, EPDM,
having excellent U.V resistance, resistance to ozone aging, resistance to sea water etc. They can with stand
ex treme climate conditions from very low ambient temperature to very high ambient temperature
prevailing in various locations across the globe.
1
INTEGRATED MANAGEMENT SYSTEMS POLICY
As suppliers of high quality rubber and engineering products and providers of prompt and
ef fective customer services, IRM Offshore & Marine Engineers Pvt. Ltd is determined to
be a market leader. We are therefore commit ted to comply with the requirements of the
Integrated Management System.
· Comply with applicable legal and other requirements with respect to Environment,
Health & Safety.
DATE: 01.06.2007
PLACE: AHMEDABAD Surendra A. Soni
[Founder Chairman]
2
INDEX
7 "DIPTI" W FENDERS 16
8 "DIPTI" I FENDERS 18
9 "DIPTI" IV FENDERS 20
3
DIPTI CYLINDRICAL FENDERS DCY SERIES
L
ØD
Ød
“DIPTI” DCY series Cylindrical Fenders are commonly used fenders recommended for all types of application to ensure a safe and linear ber thing for the
dif ferent kind of Vessels. DCY Fenders are an economical solution to protect most of the ber thing structures and of fer much ease for installation. The
distinct characteristic of these Fenders are a linear load deflection curve. This implies less reaction force at lower deflection. When the range of vessel
varies from small to big in the same ber th, these fenders of fer lesser reaction force for smaller vessel unlike buckling column fenders. These Fenders are
manufactured by compression moulding process at very high pressure of 1000 to 2000 Tons Load, which is much bet ter and advanced technology than
the ancient ex trusion process, resulting in zero porosity / bubble free moulding of Rubber Fenders. This thus enhances its design life. “DIPTI” Cylindrical
Fenders are available in wide range from 100 mm outer diameter to 3000 mm outer diameter in 2 to 3 meter length single piece moulded.( Higher length
available on specific request.)
DIMENSION TABLE ALL DIMENSIONS ARE IN MM.
APPROX. WEIGHT
MODEL NO. OD Od Kgs/Mtr.
DCY 150 150 75 18
DCY 200 200 100 31
DCY 250 / DCY 256 250 / 256 125 48 / 51
DCY 300 / DCY 380 300 / 380 150 / 150 69 / 124
DCY 350 / DCY 380 350 / 380 175 / 190 94 / 111
DCY 400 / DCY 390 400 / 390 200 / 190 123 / 120
DCY 500 / DCY 485 500 / 485 250 / 245 192 / 180
DCY 600 600 300 276
DCY 700 700 350 375
DCY 800 800 400 / 500 490 / 400
DCY 900 900 450 620
DCY 1000 1000 500 766
DCY 1100 1100 550 927
DCY 1200 1200 600 1103
DCY 1300 1300 650 1295
DCY 1400 1400 700 / 800 1501 / 1350
DCY 1500 1500 750 / 850 1725 / 1560
DCY 1600 1600 800 1960
DCY 1700 1700 850 2212
DCY 1800 1800 900 2480
DCY 1900 1900 950 2764
DCY 2000 2000 1000 3062
DCY 2100 2100 1050 3376
DCY 2200 2200 1100 3705
DCY 2300 2300 1150 4050
DCY 2400 2400 1200 4409
DCY 2500 2500 1250 4784
DCY 2600 2600 1300 5174
DCY 2700 2700 1350 5580
DCY 2800 2800 1400 6001
DCY 2900 2900 1450 6437
DCY 3000 3000 1500 6890
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
4 www.irmome.com
DIPTI CYLINDRICAL FENDERS DCY SERIES
PERFORMANCE TABLE
GRADE R1 R1.1 R1.2 R1.3 R2.0 R2.1 R2.2 R2.3 R3.0
DEFLECTION 50% 55% 50% 55% 50% 55% 50% 55% 50% 55% 50% 55% 50% 55% 50% 55% 50% 55%
MODEL NO. R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M)
DCY 150 10.3 0.26 19.8 0.37 9.83 0.25 18.98 0.36 9.35 0.25 18.15 0.35 8.88 0.24 17.33 0.33 8.4 0.23 16.5 0.32 7.33 0.21 14.70 0.29 6.25 0.19 12.9 0.26 5.18 0.16 11.10 0.22 4.1 0.14 9.3 0.19
DCY 200 13.8 0.47 26.4 0.66 13.15 0.46 25.30 0.64 12.50 0.44 24.20 0.62 11.85 0.43 23.10 0.59 11.2 0.41 22.0 0.57 9.75 0.37 19.60 0.51 8.30 0.34 17.2 0.46 6.85 0.30 14.80 0.40 5.4 0.26 12.4 0.34
DCY 250 17.2 0.74 33.0 1.04 16.40 0.72 31.63 1.01 15.60 0.70 30.25 0.97 14.80 0.67 28.88 0.94 14 0.65 27.5 0.90 12.20 0.59 24.50 0.81 10.40 0.53 21.5 0.72 8.60 0.47 18.50 0.62 6.8 0.41 15.5 0.53
DCY 300 20.7 1.07 39.6 1.50 19.73 1.04 37.95 1.45 18.75 1.00 36.30 1.40 17.78 0.97 34.65 1.34 16.8 0.93 33.0 1.29 14.63 0.85 29.40 1.16 12.45 0.77 25.8 1.03 10.28 0.68 22.20 0.90 8.1 0.60 18.6 0.77
DCY 350 24.1 1.46 46.2 2.04 22.98 1.41 44.28 1.97 21.85 1.37 42.35 1.90 20.73 1.32 40.43 1.83 19.6 1.27 38.5 1.76 17.08 1.16 34.30 1.58 14.55 1.04 30.1 1.41 12.03 0.93 25.90 1.23 9.5 0.80 21.7 1.05
DCY 400 27.5 1.96 53 2.67 26.23 1.89 50.75 2.58 24.95 1.81 48.50 2.49 23.68 1.74 46.25 2.39 22.4 1.66 44.0 2.30 19.50 1.51 39.20 2.07 16.60 1.36 34.4 1.84 13.70 1.21 29.60 1.60 10.8 1.06 24.8 1.37
DCY 500 34.4 2.98 66 4.17 32.80 2.89 63.25 4.03 31.20 2.79 60.50 3.89 29.60 2.70 57.75 3.74 28 2.60 55 3.60 24.38 2.36 49.0 3.24 20.75 2.13 43.0 2.87 17.13 1.89 37.0 2.51 13.5 1.65 31.0 2.14
DCY 600 41.3 4.28 80 6.01 39.38 4.15 76.50 5.80 37.45 4.01 73.00 5.60 35.53 3.88 69.50 5.39 33.6 3.74 66 5.18 29.25 3.40 58.80 4.66 24.90 3.06 51.6 4.13 20.55 2.72 44.40 3.61 16.2 2.38 37.2 3.08
DCY 700 48.1 5.38 93 8.18 45.88 5.31 89.00 7.90 43.65 5.24 85.00 7.62 41.43 5.16 81.00 7.33 39.2 5.09 77 7.05 34.13 4.63 68.60 6.34 29.05 4.16 60.2 5.63 23.98 3.70 51.80 4.91 18.9 3.23 43.4 4.20
DCY 800 55 7.62 106 10.6 52.45 7.38 101.50 10.25 49.90 7.14 97.00 9.91 47.35 6.89 92.50 9.56 44.8 6.65 88 9.21 39.00 6.04 78.40 8.28 33.20 5.44 68.8 7.35 27.40 4.83 59.20 6.42 21.6 4.22 49.6 5.49
DCY 900 62 9.64 119 13.5 59.25 9.34 114.00 13.03 56.50 9.03 109.00 12.55 53.75 8.73 104.00 12.08 51 8.42 99 11.6 44.33 7.65 88.25 10.44 37.65 6.89 77.5 9.27 30.98 6.12 66.75 8.11 24.3 5.35 56 6.94
DCY 1000 69 11.9 132 16.7 65.75 11.53 126.5 16.13 62.50 11.15 121.0 15.55 59.25 10.78 115.5 14.98 56 10.4 110 14.4 48.75 9.45 98.0 12.95 41.5 8.5 86.0 11.49 34.25 7.55 74.0 10.04 27.0 6.60 62 8.58
DCY 1100 76 14.4 145 20.2 72.50 13.93 139.00 19.50 69.00 13.45 133.00 18.80 65.50 12.98 127.00 18.10 62 12.5 121 17.4 53.93 11.37 107.75 15.65 45.85 10.25 94.5 13.90 37.78 9.12 81.25 12.15 29.7 7.99 68 10.4
DCY 1200 83 17.1 159 24.0 79.25 16.55 152.25 23.18 75.50 16.00 145.50 22.35 71.75 15.45 138.75 21.53 68 14.9 132 20.7 59.10 13.55 117.75 18.60 50.20 12.20 103.5 16.50 41.30 10.85 89.25 14.40 32.4 9.50 75 12.3
DCY 1300 90 20.1 172 28.2 85.75 19.45 164.75 27.23 81.50 18.80 157.50 26.25 77.25 18.15 150.25 25.28 73 17.5 143 24.3 63.53 15.93 127.50 21.85 54.05 14.35 112.0 19.40 44.58 12.78 96.50 16.95 35.1 11.2 81 14.5
DCY 1400 97 23.3 185 32.7 92.50 22.55 177.25 31.58 88.0 21.80 169.50 30.45 83.50 21.05 161.75 29.33 79 20.3 154 28.2 68.70 18.45 137.25 25.35 58.40 16.60 120.5 22.50 48.10 14.75 103.75 19.65 37.8 12.9 87 16.8
DCY 1500 103 26.8 198 37.6 98.25 26.0 189.75 36.3 93.5 25.20 181.50 35.00 88.75 24.40 173.25 33.70 84 23.6 165 32.4 73.13 21.43 147.0 29.13 62.25 19.25 129.0 25.85 51.38 17.08 111.0 22.58 40.5 14.9 93 19.3
DCY 1600 110 30.5 212 42.7 105.00 29.53 203.00 41.23 100.0 28.55 194.00 39.75 95.00 27.58 185.00 38.28 90 26.6 176 36.8 78.30 24.18 157.00 33.08 66.60 21.75 138.0 29.35 54.90 19.33 119.00 25.63 43.2 16.9 100 21.9
DCY 1700 117 34.4 224 48.3 111.75 33.30 214.75 46.63 106.5 32.20 205.50 44.95 101.25 31.10 196.25 43.28 96 30.0 187 41.6 83.48 27.28 166.50 37.40 70.95 24.55 146.0 33.20 58.43 21.83 125.50 29.00 45.9 19.1 105 24.8
DCY 1800 124 38.6 238 54 118.25 37.35 228.00 52.15 112.5 36.10 218.00 50.30 106.75 34.85 208.00 48.45 101 33.6 198 46.6 87.90 30.55 176.50 41.88 74.80 27.50 155.0 37.15 61.70 24.45 133.50 32.43 48.6 21.4 112 27.7
DCY 1900 130 43.0 251 60 124.25 41.63 240.50 58.00 118.5 40.25 230.00 56.00 112.75 38.88 219.50 54.00 107 37.5 209 52 93.25 34.08 186.25 46.73 79.50 30.65 163.5 41.45 65.75 27.23 140.75 36.18 52 23.8 118 30.9
DCY 2000 138 47.6 264 66 131.50 46.10 253.0 63.75 125.0 44.60 242.0 61.5 118.5 43.10 231.0 59.25 112 41.6 220 57 97.50 37.80 196.00 51.33 83.00 34.00 172.0 45.65 68.50 30.20 148.00 39.98 54 26.4 124 34.3
DCY 2100 144 52 277 74 137.50 50.45 265.50 71.50 131.0 48.90 254.00 69.00 124.50 47.35 242.50 66.50 118 45.8 231 64 102.75 41.63 205.75 57.45 87.50 37.45 180.5 50.90 72.25 33.28 155.25 44.35 57 29.1 130 37.8
DCY 2200 151 57 291 80 144.25 55.25 278.75 77.25 137.5 53.50 266.50 74.50 130.75 51.75 254.25 71.75 124 50 242 69 108.00 45.48 215.75 62.13 92.00 40.95 189.5 55.25 76.00 36.43 163.25 48.38 60 31.9 137 41.5
DCY 2300 158 63 304 88 150.75 61.00 291.25 85.00 143.5 59.00 278.50 82.00 136.25 57.00 265.75 79.00 129 55 253 76 112.50 49.98 225.50 68.35 96.00 44.95 198.0 60.70 79.50 39.93 170.50 53.05 63 34.9 143 45.4
DCY 2400 165 68 317 96 157.50 65.75 303.75 92.50 150.0 63.50 290.50 89.00 142.50 61.25 277.25 85.50 135 59 264 82 117.50 53.75 235.25 73.85 100.00 48.50 206.5 65.70 82.50 43.25 177.75 57.55 65 38.0 149 49.4
DCY 2500 172 74 330 104 164.0 71.75 316.25 100.5 156.0 69.5 302.5 97.0 148.0 67.25 288.75 93.5 140 65 275 90 122.0 59.08 245.0 81.0 104.0 53.15 215.0 72 86 47.23 185 63 68 41.3 155 54
DCY 2600 179 80 344 112 170.75 77.50 329.50 108.25 162.5 75.00 315.00 104.50 154.25 72.50 300.50 100.75146 70 286 97 127.25 63.65 255.00 87.25 108.50 57.30 224.0 77.50 89.75 50.95 193 67.75 71 44.6 162 58
DCY 2700 185 86 356 122 176.75 83.25 341.25 117.75 168.5 80.50 326.50 113.50 160.25 77.75 311.75 109.25152 75 297 105 132.25 68.28 264.50 94.50 112.50 61.55 232.0 84.00 92.75 54.83 199.5 73.50 73 48.1 167 63
DCY 2800 194 93 370 130 184.75 90.00 354.50 125.5 175.50 87.00 339.00 121.00 166.25 84.00 323.50 116.50157 81 308 112 136.75 73.50 274.50 100.75 116.50 66.00 241.0 89.50 96.25 58.50 207.5 78.25 76 51 174 67
DCY 2900 199 100 383 140 190 96.75 367 135.25 181.00 93.50 351.00 130.50 172 90.25 335.00 125.75163 87 319 121 142.00 79.00 284.25 108.75 121.00 71.00 249.5 96.50 100 63.00 214.75 84.25 79 55 180 72
DCY 3000 206 107 396 150 196.5 103.5 379.5 144.75 187 100 363 139.5 177.5 96.5 346.5 134.25168 93 330 129 146.25 84.5 294 116 124.5 76 258 103 102.75 67.5 222.00 90 81 59 186 77
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 5
DIPTI ARCH FENDERS DA SERIES
1000
P I P
A
B
1500
Q J J Q C
2000
H
R K K K R
2500 F D
W
S M M M S
3000 E
T N N N N T
3500
DETAIL X
U O O O O O U
DA 150H 150 300 240 98 96 170 22.5 M22 110 112.5 107.5 110 107.5 110 855 675 620 785 715 671 40
DA 200H 200 400 320 131 128 175 30 M24 120 120 120 122.5 120 120 860 680 620 785 715 672 65
DA 250H 250 500 410 164 160 200 37.5 M27 130 132.5 132.5 127.5 132.5 130 865 680 620 790 715 673 100
DA 300H 300 600 490 197 192 225 45 M30 140 140 137.5 140 145 140 870 685 625 790 715 674 130
DA 400H 400 800 670 262 256 275 60 M36 150 150 147.5 150 150 - 900 700 635 800 725 - 230
DA 500H 500 1000 840 328 320 325 75 M42 160 160 157.5 160 165 - 930 715 645 810 730 - 355
DA 600H 600 1200 1010 393 384 375 90 M48 170 170 167.5 170 170 - 960 730 655 820 740 - 520
DA 800H 800 1600 1340 524 501 475 120 M64 180 180 180 182.5 180 - 1040 770 680 845 760 - 932
DA 1000H 1000 2000 1680 655 626 475 150 M64 200 200 200 202.5 200 - 1100 800 700 865 775 - 1490
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
6 www.irmome.com
DIPTI ARCH FENDERS DA SERIES
“DIPTI” DA series Arch Fenders were introduced to improve upon the per formance of Cylindrical Fenders. “DIPTI” Arch Fenders are having
a bet ter Energy / Reaction force ratio and recommended for all types of applications. The very shape of these Fenders helps to dissipate the
stresses evenly. These Fenders are very easy to install and are maintenance free. Generally preferred for small to medium range Vessels.
These are manufactured by compression moulding under very high load in single piece with steel inser t plates encapsulated in the legs to
fit them to Whar f /Jet ty Structure. These Fenders have got very good shear resistance and do not require tension and shear chains even
when they are equipped with Frontal Pads. The unique rubber compound developed for these Fenders are having excellent U.V Resistance,
resistance to ozone aging, resistance to sea water and ex treme climate conditions from very low ambient temperature to very high
temperatures prevailing in Global ber thing locations. “DIPTI” DA series Arch Fenders are available in wide range from 150mm height to
1000mm height in dif ferent lengths up to 3.5 ( or more on specific request) meter single piece as per customers requirements.
PERFORMANCE TABLE
RUBBER GRADE R1 R1.1 R2 R2.1 R3 R3.1 R4
DEFLECTION 45% 50% 45% 50% 45% 50% 45% 50% 45% 50% 45% 50% 45% 50%
MODEL NO. R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
DA 150H 12.8 0.7 17.2 0.9 11.9 0.63 16.0 0.83 11 0.55 14.8 0.75 9.6 0.50 12.9 0.64 8.2 0.45 11 0.52 6.9 0.38 9.3 0.44 5.5 0.3 7.5 0.35
DA 200H 17.3 1.5 22.8 1.7 16.3 1.40 21.3 1.60 15.2 1.3 19.8 1.5 13.2 1.10 17.5 1.30 11.2 0.90 15.1 1.1 9.3 0.75 12.6 0.90 7.4 0.6 10 0.7
DA 250H 21.3 1.9 23.9 2.2 19.9 1.80 24.4 2.10 18.4 1.7 24.8 2 16.2 1.50 21.8 1.75 13.9 1.30 18.8 1.5 11.6 1.10 15.7 1.30 9.3 0.9 12.5 1.1
DA 300H 25.5 2.7 34.4 3.2 23.8 2.60 32.3 3.05 22 2.5 30.1 2.9 19.3 2.20 26.4 2.55 16.5 1.90 22.6 2.2 14.0 1.60 19.0 1.85 11.4 1.3 15.4 1.5
DA 400H 34.4 4.4 46.5 5.5 32.1 4.35 43.3 5.15 29.7 4.3 40.1 4.8 26.0 3.75 35.1 4.35 22.3 3.20 30.1 3.9 18.8 2.75 25.3 3.30 15.2 2.3 20.5 2.7
DA 500H 42.7 7.1 57.9 8.7 40.0 7.0 54.1 8.2 37.2 6.9 50.2 7.7 32.5 5.95 43.8 6.80 27.8 5.00 37.4 5.9 23.1 4.10 31.3 4.85 18.4 3.2 25.2 3.8
DA 600H 51.2 10.3 69.3 12 47.9 9.8 64.9 11.4 44.5 9.2 60.5 10.7 39.15 8.2 53.10 9.5 33.8 7.10 45.7 8.2 28.1 5.90 38.0 6.80 22.3 4.7 30.2 5.4
DA 800H 68.5 18.7 92.5 21.4 64.0 17.5 86.6 20.4 59.5 16.3 80.6 19.3 52.4 14.3 70.7 16.9 45.2 12.3 60.7 14.4 37.5 10.30 50.7 12.00 29.7 8.3 40.6 9.6
DA 1000H 85.8 28.6 116 37.7 80.2 27.2 108.5 33.8 74.6 25.7 101 29.8 65.4 22.4 88.4 26.5 56.2 19.1 75.7 23.1 46.8 16.45 63.1 19.65 37.3 13.8 50.5 16.2
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 7
DIPTI FLAT TOP ARCH FENDERS DFTA SERIES
1000
P I P
A
B
1500
Q J J Q
2000 C
X
H
F
R K K K R
2500
D
W
S M M M S
3000
E
T N N N N T
3500
DETAIL X
U O O O O O U
PERFORMANCE TABLE
RUBBER GRADE R1 R2 R3 R4
DEFLECTION 52.5% 52.5% 52.5% 52.5%
MODEL NO. R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
DFTA 250H 26.7 2.85 20.9 2.20 17.2 1.83 13.5 1.44
DFTA 300H 32.2 4.05 24.8 3.14 20.6 2.80 16.7 2.60
DFTA 400H 43.2 7.23 33.3 5.56 27.4 4.62 22.3 3.73
DFTA 500H 53.8 11.5 41.4 8.72 34.7 7.24 27.5 5.82
DFTA 600H 64.5 16.2 49.7 12.4 41.6 10.4 33.1 8.33
DFTA 800H 86.3 29.1 66.3 22.0 55.2 18.6 44.0 14.6
DFTA 1000H 108.0 45.2 82.8 34.7 69.0 29.0 55.3 23.3
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 9
DIPTI DYNA ARCH FENDERS DYA SERIES
1000
A
B
P I P
1500
Q J J Q
2000
X
H
F
D
R K K K R
2500
S M M M S
3000
E
T N N N N T
3500
DETAIL X
U O O O O O U
DYA 250H 250 500 410 164 160 200 33 M27 130 132.5 132.5 127.5 132.5 130 865 680 620 790 715 673 85
DYA 300H 300 600 490 225 195 225 37.5 M30 140 140 137.5 140 145 140 870 685 625 790 715 674 120
DYA 400H 400 800 670 300 260 275 40 M36 150 150 147.5 150 150 150 900 700 635 800 725 680 208
DYA 500H 500 1000 840 375 325 325 45 M42 160 160 157.5 160 165 160 930 715 645 810 730 686 325
DYA 600H 600 1200 1010 450 390 375 54 M48 170 170 167.5 170 170 170 960 730 655 820 740 692 480
DYA 800H 800 1600 1340 600 520 475 72 M56 180 180 180 182.5 180 - 1040 770 680 845 760 - 875
DYA 1000H 1000 2000 1680 750 650 475 90 M64 200 200 200 - - - 1100 800 700 - - - 1395
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
10 www.irmome.com
DIPTI DYNA ARCH FENDERS DYA SERIES
“DIPTI” DYA series Arch Fender are an innovative modified version of other solid Fenders like Arch & W type Fenders. Whar f side of Dyna
Arch fenders are fully reinforced with steel plate, which transfer ber thing energy on more area. Thus reduce pressure on Jet ty wall. These
fenders are more preferred where the dock or jet ty walls are weaker. These Fenders can be equipped with low friction rubbing board to
reduce friction and Frontal Frame to enhance coverage. Generally used in small Harbours & Jet ties and ensures long life and per formance.
The geometry and proper ty allows the DYA series Fenders to deflect more resulting into a bet ter energy absorption and reaction force ratio
as compared to DA type Arch Fenders. These Fenders are very easy to install and are maintenance free and of fers a long trouble free
service life. These Fenders are generally used for small to medium range Vessels. These Fenders are also manufactured from specialized
rubber compound having excellent resilience which gives excellent U.V resistance proper ty, resistance to ozone aging, resistance to sea
water. This added feature helps Fenders to per form well under ex treme climate conditions from very low ambient temperature to very high
ambient temperature prevailing in Global ber thing locations. “DIPTI” DYA series Arch Fenders are available in wide range from 250 mm
height to 1000mm height in dif ferent lengths up to 3.5 (or more if required) meter single piece as per customers requirements.
PERFORMANCE TABLE
RUBBER GRADE R1 R2 R3 R4
DEFLECTION 52% 55% 52% 55% 52% 55% 52% 55%
MODEL NO. R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M)
DYA 250H 27.0 2.8 37.5 3.0 20.8 2.2 28.8 2.3 17.2 1.8 23.9 1.9 14.8 1.6 20.5 1.7
DYA 300H 32.4 4.1 45.0 4.4 24.9 3.1 34.6 3.3 20.6 2.6 28.6 2.8 17.7 2.2 24.6 2.4
DYA 400H 43.2 7.3 60.0 7.8 33.2 5.6 46.1 6.0 27.5 4.6 38.2 4.9 23.6 4.0 32.8 4.3
DYA 500H 54.0 11.3 75.0 12.1 41.5 8.7 57.6 9.3 34.4 7.2 47.8 7.7 29.5 6.2 41.0 6.6
DYA 600H 64.7 16.3 89.9 17.5 49.8 12.6 69.2 13.5 41.2 10.4 57.2 11.1 35.4 8.9 49.2 9.5
DYA 800H 86.4 29.0 120 31.1 66.4 22.3 92.2 23.9 55.0 18.5 76.4 19.8 47.2 15.9 65.6 17.0
DYA 1000H 108 45.4 150 48.6 83.0 34.9 115.3 37.4 68.8 28.9 95.6 31.0 59.0 24.8 82.0 26.6
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 11
DIPTI ARCH FENDERS DAV SERIES
I I
E W
DETAIL X
DAV 150H 150 326 240 98 108 150 16 50 50 50 50 50 500 500 500 500 500 M16 30
DAV 200H 200 422 320 130 142 150 18 50 50 50 50 50 500 500 500 500 500 M20 48
DAV 250H 250 500 400 163 164 175 20 62.50 62.50 62.50 62.50 62.50 500 500 500 500 500 M24 70
DAV 300H 300 595 480 195 194 175 24 75 75 75 75 75 500 500 500 500 500 M24 108
DAV 400H 400 808 640 260 266 225 26 100 100 100 100 100 500 500 500 500 500 M30 186
DAV 500H 500 981 800 325 318 275 26 125 125 125 125 125 500 500 500 500 500 M36 280
DAV 600H 600 1160 960 390 373 325 28 150 150 150 150 150 500 500 500 500 500 M42 412
DAV 800H 800 1550 1300 520 499 375 41 200 200 200 200 200 500 500 500 500 500 M48 770
DAV 1000H 1000 1850 1550 650 580 375 52 250 250 250 250 250 500 500 500 500 500 M48 1300
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
12 www.irmome.com
DIPTI ARCH FENDERS DAV SERIES
“DIPTI” DAV series V shaped Arch Fenders are developed to improve upon the per formance of the conventional Arch Fenders with cost
ef fectiveness. The geometry and profile allow the DAV series Fenders to deflect more, resulting into a bet ter energy absorption and reaction
force ratio. These Fenders are easy to install and are maintenance free and of fers a long trouble free service life. They are generally
preferred for small to medium range Boats and Tugs and are recommended for any kind of Whar fs and Jet ties. Our DAV Fenders are
manufactured by compression moulding under very high load in single piece with steel inser t plates encapsulated in the legs to fit them to
Whar f /Jet ty Structure. The unique high abrasion resitant rubber compound having excellent resilience developed for these Fenders give
excellent U.V resistance proper ty, resistance to ozone aging, resistance to sea water. This added feature helps Fenders to per form well
under ex treme climate conditions from very low ambient temperature to very high temperatures prevailing in Global ber thing locations.
“DIPTI” DAV series Arch Fenders are available in wide range from 150mm height to 1000mm height in dif ferent lengths up to 3.5 (or more if
required) meter single piece as per customers’ requirements.
PERFORMANCE TABLE
RUBBER GRADE R1 R1.1 R2 R2.1 R3 R3.1
DEFLECTION 51.5%
MODEL R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M)
DAV 150H 12.7 0.74 11.2 0.65 9.6 0.56 8.5 0.50 7.4 0.43 6.75 0.39
DAV 200H 16.9 1.31 14.9 1.16 12.8 1.0 11.4 0.88 9.9 0.76 9.1 0.68
DAV 250H 21.1 2.05 18.6 1.81 16.0 1.56 14.2 1.38 12.3 1.19 11.2 1.07
DAV 300H 25.3 2.95 22.3 2.60 19.2 2.25 17.0 1.98 14.8 1.71 13.5 1.52
DAV 400H 33.9 5.25 29.8 4.63 25.6 4.0 22.7 3.53 19.7 3.05 18.0 2.73
DAV 500H 42.2 8.20 37.2 7.22 32.1 6.24 28.4 5.50 24.7 4.76 22.4 4.26
DAV 600H 50.7 11.6 44.6 10.3 38.5 8.99 34.05 7.9 29.6 6.86 26.8 6.04
DAV 800H 67.5 21.0 59.4 18.5 51.3 16.0 45.4 14.1 39.4 12.2 35.6 10.9
DAV 1000H 84.4 32.8 74.3 28.9 64.1 25.0 56.7 22.1 49.3 19.1 44.7 17.1
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 13
DIPTI ARCH FENDERS DAVP SERIES
I I
B
C
H
X
F
D
E W
DETAIL X
DAV 150H 150 326 240 98 108 150 16 50 50 50 50 50 500 500 500 500 500 M16 30
DAV 200H 200 422 320 130 142 150 18 50 50 50 50 50 500 500 500 500 500 M20 48
DAV 250H 250 500 400 163 164 175 26 62.50 62.50 62.50 62.50 62.50 500 500 500 500 500 M24 70
DAV 300H 300 595 480 195 194 175 24 75 75 75 75 75 500 500 500 500 500 M24 108
DAV 400H 400 808 640 260 266 225 20 100 100 100 100 100 500 500 500 500 500 M30 186
DAV 500H 500 981 800 325 318 275 26 125 125 125 125 125 500 500 500 500 500 M36 280
DAV 600H 600 1160 960 390 373 325 28 150 150 150 150 150 500 500 500 500 500 M42 412
DAV 800H 800 1550 1300 520 499 375 41 200 200 200 200 200 500 500 500 500 500 M48 770
DAV 1000H 1000 1850 1550 650 580 375 52 250 250 250 250 250 500 500 500 500 500 M48 1300
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
14 www.irmome.com
DIPTI ARCH FENDERS DAVP SERIES
“DIPTI” DAVP series V shape Arch Fenders are similar to the DAV series V Fenders, but equipped with anti sparking, low friction rubbing
board to improve upon their ef fective service life and superior per formance. It of fers reduced friction and resultant less load transmit ted to
the structure. This also prevent Fender face from get ting damaged by any type of protrusion of ber thing Vessels and enhance Fender
service life under ex treme rolling and pitching of Vessels during loading and unloading of cargo. “DIPTI” DAVP Fenders are versatile, easy
to install and ensure a long trouble free life. They are produced by compression moulding with thermic fluid heating in controlled
atmosphere to ensure optimum per formance characteristics. These Fender of fers excellent resistance to atmospheric aging and hence
very good strength and stability.“DIPTI” DAVP series Arch Fenders are available in wide range from 150mm height to 1000mm height in
dif ferent lengths up to 3 (or more if required) meter single piece, fit ted with suitable rubbing board (Synthetic Resin Facia Pads) as per
customers requirements.
MODEL NO. U V X Y X Y
MODEL R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M) R(T) E(T-M)
DAVP 150H 15.0 0.95 13.3 0.84 11.5 0.73 10.2 0.65 8.9 0.56 0.8 0.48
DAVP 200H 20.0 1.68 17.7 1.49 15.4 1.29 13.6 1.14 11.8 0.99 10.5 0.84
DAVP 250H 25.0 2.63 22.1 2.33 19.2 2.02 17.0 1.79 14.8 1.56 13.3 1.41
DAVP 300H 30.0 3.78 26.6 3.35 23.1 2.91 20.5 2.58 17.8 2.24 15.9 2.01
DAVP 400H 40.0 6.72 35.4 5.95 30.8 5.17 27.3 4.58 23.7 3.98 21.3 3.57
DAVP 500H 50.0 10.5 44.4 9.29 38.8 8.08 34.2 7.15 29.6 6.21 26.0 5.56
DAVP 600H 60.0 15.1 53.1 13.4 46.2 11.6 40.85 10.3 35.5 8.93 30.2 8.0
DAVP 800H 80.0 26.9 70.8 23.8 61.5 20.7 54.4 18.3 47.3 15.9 42.3 14.2
DAVP 1000H 100.0 42.0 88.5 37.2 76.9 32.3 68.1 28.6 59.2 24.9 53.1 22.4
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH (R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 15
DIPTI W FENDERS DW SERIES
1000
P I P
A
B
1500
Q J J Q C
2000
X
H
F
R K K K R D
2500
W
S M M M S
3000
E
T N N N N T
3500
DETAIL X
U O O O O O U
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
16 www.irmome.com
DIPTI W FENDERS DW SERIES
“DIPTI” DW series W type Fenders are an improvised version of the Arch and Flat Top Arch Fenders. These Fenders are having more
deflection and bet ter Energy / Reaction ratio in comparison to both Cylindrical, Arch & Flat Top Arch Fenders. Because of wide Fender face,
the Hull Pressure is also relatively low as compared to both Arch and Flat Top Arch Fenders. These types of Fenders can be easily installed
and they are maintenance free. Wide range is available for dif ferent Vessels. These Fenders are moulded under ver y high load in single
piece encapsulating the steel plates in the base of the Fender legs for fitment to the Whar f. This Fender has got long life in a very severe duty
conditions. All types of big Vessels can be ber thed on these fenders due to its bet ter resilience and higher deflection. Our DW type Fenders
can be fit ted to any type of Ber thing Structures with ease. These Fenders can also be supplied with Anti Friction and Anti sparking UHMW
Facia Pads to increase Fender life. The excellent mechanical proper ties of rubber coupled with very good resistance towards sea water,
ozone aging and ultra violet rays makes it a preferred Fender for most applications and for a wide variety of vessels too. “DIPTI” DW series
W type Fenders are available in wide range from 250mm height to 1000mm height in dif ferent lengths up to 3.5meter (or more if required)
single piece as per customers requirements.
PERFORMANCES TABLE
RUBBER GRADE R1 R2 R3 R4
DEFLECTION 50% 55% 50% 55% 50% 55% 50% 55%
MODEL NO. R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
DW 250H 28.4 3.15 39.8 3.5 21.5 2.35 30.7 2.55 18.2 1.85 24.6 2.2 15.2 1.75 21.3 1.85
DW 300H 34.0 4.25 48.5 4.9 25.8 3.25 36.7 3.6 21.5 2.65 29.8 3.1 18.2 2.25 25.2 2.65
DW 400H 45.2 7.6 63.5 8.75 34.3 5.65 49.0 6.35 28.4 4.5 40.2 5.3 24.4 4.0 34.2 4.75
DW 500H 56.7 11.9 80.3 13.7 43.2 8.75 61.0 9.8 36.2 7.25 49.8 8.35 30.8 6.25 42.0 7.0
DW 600H 68.0 17.1 95.8 19.2 52.3 12.3 74.2 14.3 42.9 10.5 59.9 12.0 36.8 8.75 50.7 9.8
DW 800H 91.2 30.2 128 34.3 70.1 21.9 98.6 25.3 57.5 18.5 79.8 21.2 49.5 15.5 68.2 17.9
DW 1000H 115.0 47.2 160 53.5 87.1 34.2 123 37.4 72.1 28.5 99.5 33.0 62.2 24.3 84.5 27.5
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 17
DIPTI I FENDERS DI SERIES
1500 L 1000 L
S
150 850 850 150
2000 L
H
P2 P1 P2
2500 L
W
E
3000 L
DETAIL X
3500 L
4000 L
18 www.irmome.com
DIPTI I FENDERS DI SERIES
“DIPTI” DI series I type Fender are a combination of two I section ver tical legs and fabricated Frontal Frames equipped with low friction UHMW HDPE pads.
These Fenders are the most ideal choice for critical heavy duty applications where ber thing conditions are not generally favourable. These Fenders are
best option for open sea Ber thing Structures / Dolphins / Jet ties, where ex treme wave and current conditions are prevailing. Our DI type Fenders are
capable of per forming under ex treme shear and compression with at most reliability. They are equipped with weight, shear and tension chain depending
upon the duty. These Fenders are compression moulded at very high load in controlled curing parameters. They of fer excellent resistance to ozone aging,
UV rays and sea water. “DIPTI” DI series I-type Fenders are available in wide range from 400mm height to 2500mm height in dif ferent lengths up to 1 to 4
meters with suitable Frontal Frames and chains as per customers requirements.
MODEL NO. H A P1 P2 S W E
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 19
DIPTI IV FENDERS DIV SERIES
1500
A
B C D C B
J
250 150 700 150 250 1000L
1000
W
2000
T
H
1500L
E
150 600 600 150
1500
2500
R K R
DETAIL X
P Q P
2000L
150 850 850 150
2000
3000
2500L
200 700 700 700 200
2500
3500
3000L
150 900 900 900 150
3000
DIV 400H 400 1000 100 400 00 225 M 30 400 300 400 60 180 M 22 1000 300
DIV 600H 600 1500 200 500 100 275 M 36 600 500 400 65 370 M 24 1400 600
DIV 800H 800 1500 100 600 100 275 M 36 700 600 500 70 460 M 24 1700 900
DIV 1000H 1000 2000 250 700 100 325 M 42 800 700 600 75 550 M 30 2000 1280
DIV 1150H 1150 2000 220 730 100 325 M 42 815 730 690 75 580 M 30 2150 1520
DIV 1250H 1250 2000 150 800 100 325 M 42 900 800 700 75 650 M 36 2300 1760
DIV 1400H 1400 2500 300 900 100 325 M 42 1000 900 800 85 730 M 36 2600 2120
DIV 1700H 1700 3000 375 1050 150 375 M 48 1200 1050 1000 95 860 M 36 3100 3020
DIV 2000H 2000 3500 450 1200 200 375 M 48 1400 1200 1200 100 1000 M 42 3600 3940
DIV 2500H 2500 4000 500 1400 200 475 M 64 1600 1400 1450 100 1200 M 48 4250 5920
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE. WEIGHT VALUES ARE FOR PAIR OF ELEMENTS
20 www.irmome.com
DIPTI IV FENDERS DIV SERIES
“DIPTI” DIV series IV type Fenders are an innovation in modern Fendering and it is the modified version of Element / Leg type of Fenders. These Fenders are
having Fender fit ting flanges at both sides which of fer more sturdiness as compared to Element / Leg types of Fenders. These Fenders are most suitable
for coping up with lateral loading. The very shape gives it excellent shear strength, sturdiness and it can accommodate the biggest Vessels in very dif ficult
ber thing conditions. These Fenders too are equipped with reinforcements and Frontal Frames. These features make it very popular for versatile
applications. Since both the upper and lower faces of the legs are having steel inser ts and each leg being a single moulded piece it ensure bet ter
mechanical strength and long life. Also reduces replacement cost. The superior proper ties of rubber used ensures a trouble free long life for these Fenders
due to its excellent mechanical strength and resistance to ozone aging, sea water resistance & ultra violet rays resistance. These Fenders are used for a
wide variety of Vessels & Ber thing Structures and of fer reliability and optimum per formance. “DIPTI” DIV series IV Fenders are available in wide range
from 400mm height to 2500mm height in dif ferent lengths up to 3 meters (or more if required) with suitable Frontal Frames as per customer’s
requirements.
R1 R2 R3 R4 R5
MODEL
DEFLECTION
NO.
R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
52.5% 33.0 5.0 30.8 4.7 26.4 4.0 22.0 3.4 17.6 2.7
DIV 400H
55% 35.3 5.4 33.0 5.0 28.2 4.3 23.5 3.6 18.8 2.8
52.5% 49.5 11.3 46.2 10.6 39.6 9.1 32.8 7.6 26.4 6.0
DIV 600H
55% 53.5 12.1 49.4 11.3 42.4 9.7 35.3 8.1 28.2 6.4
52.5% 66.6 20.2 61.1 18.8 52.8 16.1 44.3 13.4 35.1 10.7
DIV 800H
55% 70.6 21.5 65.9 20.1 56.5 17.2 47.1 14.4 37.6 11.4
52.5% 82.5 34.4 77.0 31.9 66.0 27.4 54.9 22.8 44.0 18.2
DIV 1000H
55% 87.9 36.6 82.0 33.9 70.3 29.1 58.6 24.2 46.8 19.4
52.5% 95.0 45.5 88.6 42.3 76.0 36.2 63.3 30.2 50.5 24.2
DIV 1150H
55% 101.1 48.1 94.4 44.9 80.9 38.5 67.4 32.1 53.8 25.7
52.5% 103.0 53.4 96.8 49.9 82.5 42.8 68.8 35.6 54.0 28.0
DIV 1250H
55% 110.0 56.8 103.0 53.0 87.9 45.4 73.2 37.8 60.0 30.5
52.5% 116.0 67.0 108.0 62.6 92.4 53.6 77.0 44.7 61.6 35.8
DIV 1400H
55% 123.0 71.2 115.0 66.4 98.4 57.0 82.0 47.5 65.6 38
52.5% 140.0 98.8 131.0 92.2 112.0 79.1 93.5 65.9 74.8 52.7
DIV 1700H
55% 149.0 106.0 139.0 98.0 120.0 84.0 99.6 70.0 79.7 56.0
52.5% 165.0 137.0 154.0 128.0 132.0 109.0 110.0 91.2 88.0 73.0
DIV 2000H
55% 176.0 145.0 164.0 136.0 141.0 116.0 117.0 96.6 93.7 77.5
52.5% 206.0 214.0 193.0 200.0 165.0 171.0 138.0 143.0 110.0 114.0
DIV 2500H
55% 220.0 227.0 205.0 212.0 176.0 182.0 147.0 151.0 117.1 121.0
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH (R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 21
DIPTI IV ELEMENT FENDERS
TYPE 1
R Q N
1000L = (2X + 3Y)
X Y Y Y X
TYPE 2
N M N
H
DETAIL X
P
S
TYPE 1 TYPE 2
DIVE 250H 57.5% 16.3 1.6 15.1 1.5 13.8 1.4 12.6 1.3 11.3 1.2 10.7 1.13 10.1 1.05 9.4 1.0 8.8 0.9 7.9 0.8
DIVE 300H 57.5% 19.3 2.4 17.9 2.2 16.5 2.1 15.0 1.9 13.6 1.7 12.8 1.6 12.1 1.5 11.3 1.4 10.5 1.3 9.5 1.2
DIVE 400H 57.5% 23.5 4.3 21.7 4.0 20.0 3.7 18.2 3.3 16.4 3.0 15.5 2.8 14.5 2.65 13.6 2.5 12.6 2.3 11.3 2.1
DIVE 500H 57.5% 29.4 6.8 27.2 6.3 25.0 5.8 22.7 5.2 20.5 4.7 19.3 4.4 18.2 4.15 17.0 3.9 15.8 3.6 14.2 3.2
DIVE 550H 57.5% 32.3 8.3 29.9 7.7 27.5 7.0 25.0 6.4 22.6 5.7 21.3 5.4 20.0 5.05 18.7 4.7 17.4 4.4 15.7 4.0
DIVE 600H 57.5% 35.2 9.8 32.6 9.1 29.9 8.3 27.3 7.6 24.6 6.8 23.2 6.4 21.8 6.0 20.4 5.6 19.0 5.2 17.1 4.7
DIVE 700H 57.5% 41.3 13.2 38.2 12.2 35.0 11.2 31.9 10.2 28.7 9.2 27.1 8.7 25.4 8.10 23.8 7.6 22.1 7.0 19.9 6.3
DIVE 750H 57.5% 44.3 15.1 41.0 14.0 37.6 12.9 34.3 11.7 30.9 10.6 29.1 10.0 27.4 9.4 25.6 8.7 23.8 8.1 21.4 7.3
DIVE 800H 57.5% 47.0 17.3 43.5 16.0 40.0 14.7 36.4 13.4 32.9 12.1 31.1 11.4 29.3 10.7 27.4 10.0 25.6 9.3 22.8 8.4
DIVE 900H 57.5% 52.9 21.9 48.9 20.3 45.0 18.6 41.0 17.0 37.0 15.3 34.9 14.4 32.7 13.6 30.6 12.7 28.4 11.8 25.6 10.6
DIVE 1000H 57.5% 58.7 27.1 54.3 25.1 50 23 45.5 21.0 41.1 18.9 38.7 17.8 36.4 16.8 34.0 15.7 31.6 14.6 28.4 13.1
DIVE 1200H 57.5% 70.6 38.6 65.3 35.7 59.9 32.8 54.6 29.9 49.2 27.0 46.4 25.4 43.5 23.9 40.7 22.3 37.8 20.7 34.0 18.6
DIVE 1400H 57.5% 82.3 53.0 76.1 49.0 70 45.0 63.7 41.0 57.5 37.0 54.2 34.9 50.9 32.8 47.5 30.7 44.2 28.6 39.8 25.7
DIVE 1600H 57.5% 93.9 69.3 86.9 64.1 79.9 58.9 72.8 53.6 65.8 48.4 62.0 45.7 58.2 42.9 54.4 40.2 50.6 37.4 45.5 33.7
DIVE 2000H 66% 101.6 108.7 94.3 100.8 86.9 93.0 79.6 85.1 72.3 77.3 64.9 69.4 57.6 61.6 50.2 53.7 42.9 45.9 35.6 38.0
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH (R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 23
DIPTI IVM FENDERS DIVM SERIES
B
F F
G I G
150
150
400
1000
700
1200
1500
T
700
H
150
K L K
400
J M J
150
C D C
A K L K
W
150
400
E
150
DETAIL X
900
400
1100
1100
150
400
850
3000
900
850
2500
2000
1200
850
1100
1100
850
900
400
400
400
150
150
150
K L K K L K
K L K
“DIPTI” DIVM series Fenders are an improvisation of both IV type and IV Element type Fenders enhancing the per formance and making it
more cost ef fective for the same type of duty. This can be compressed more and by the vir tue of its more deflection, its capacity to absorb
Energy is more, compared to similar IV type and IV Element type Fenders. These Fenders are reinforced with MS Inser ts at top & bot tom,
can be supplied in any length. These can be fit ted both in ver tical & horizontal direction and of fer ma ximum stability towards ver tical &
horizontal loads. These Fenders are equipped with unique rubbing boards to reduce the friction and avoid sparking. Modular arrangement of
fixing multiple Fenders is the added advantage of these Fenders. These Fenders cater to a wide variety of applications both in terms of
Vessels (size & types) and Structures. These Fenders of fer a trouble free long life and are maintenance free due to superior proper ties of
the unique rubber compound employed while moulding these Fenders with precision. “DIPTI” DIVM series Fenders are available in wide
range from 400mm height to 2500mm height in dif ferent length from 3 Meters (or more if required) with suitable Frontal Pads or Frontal
Frames as per customers requirements.
R1 R2 R3 R4
MODEL DEFECTION
NO. R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
X
D H
OB
DETAIL X
OC
APPROX
MODEL NO. A OB OC D E F H W
WEIGHT IN KG.
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
26 www.irmome.com
DIPTI CELL FENDERS DC SERIES
“DIPTI” DC series Cell Fenders are best employed for smallest to biggest Vessels where Reaction Force is an impor tant criteria. Among all types of
Fenders, Cell Fenders of fer minimum reaction per ton-meter energy absorbed. The very geometrical shape gives it sturdiness, shear resistance, compact
Structure and the capacity to absorb energy equally from all directions. The Cylindrical buckling column absorbs a xial loads ef fectively and buckles
radially. This results in multi directional dispersion of energy. These fenders are equipped with Frontal Frames with low friction facia Pads to reduce the
shear force as well as the hull pressure. Multiple installations with Frontal Frame are feasible to reduce height of Fender and to accommodate smallest and
biggest Vessels at high tidal variation site. These Fenders find ex tensive application for a variety of Vessels and Ber thing Structures. The excellent
mechanical proper ty of the rubber compound used for manufacturing these Fenders ensures long life and reliability even though they are subjected to
ex treme loads. “DIPTI” Cell type DC series Fenders are manufactured by compression moulding process at very high load unlike conventional lining and
vulcanizing process which gives superior proper ties to the rubber and ensures zero porosity moulding and trouble free long life for these Fenders.
PERFORMANCE TABLE
DEFLECTION
MODEL NO.
R1.0 R1.1 R1.2 R1.3 R2.0 R2.1 R2.2 R2.3 R3.0 R3.1 R3.2 R3.3 R4.0 R4.1 R4.2 R4.3 R5.0 R5.1
R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
52.5% 12.0 2.1 11.7 2.0 11.4 2.0 11 1.9 10.7 1.8 10.4 1.8 10 1.7 9.7 1.7 9.3 1.6 8.8 1.5 8.2 1.4 7.7 1.3 7.1 1.2 6.8 1.2 6.4 1.1 6.1 1.1 5.7 1.0 5.2 0.89
DC 400H
55% 12.8 2.2 12.5 2.2 12.1 2.1 12 2.1 11.4 2.0 11.0 1.9 11 1.9 10.2 1.8 9.8 1.7 9.3 1.6 8.7 1.5 8.2 1.4 7.6 1.3 7.2 1.3 6.9 1.2 6.5 1.2 6.1 1.1 5.5 1.0
52.5% 18.8 4.0 18.3 3.9 17.8 3.8 17 3.7 16.7 3.6 16.2 3.5 16 3.4 15.1 3.2 14.5 3.1 13.7 2.9 12.8 2.8 12.0 2.6 11.1 2.4 10.6 2.3 10.0 2.2 9.5 2.0 8.9 1.9 8 1.7
DC 500H
55% 20.0 4.4 19.4 4.3 18.9 4.2 18 4.0 17.7 3.9 17.1 3.8 17 3.7 16.0 3.5 15.4 3.4 14.5 3.2 13.6 3.0 12.7 2.8 11.8 2.6 11.2 2.5 10.7 2.4 10.1 2.2 9.5 2.1 8.5 1.8
52.5% 29.6 8.2 28.8 8.0 28 7.8 27 7.5 26.3 7.3 25.4 7.1 25 6.8 23.7 6.6 22.8 6.3 21.5 5.9 20.2 5.6 18.8 5.2 17.5 4.8 16.6 4.6 15.8 4.4 14.9 4.1 14.0 3.9 12.6 3.5
DC 630H
55% 31.5 8.7 30.6 8.5 29.8 8.2 29 8.0 28.0 7.7 27.1 7.5 26 7.2 25.2 7.0 24.2 6.7 22.8 6.3 21.4 5.9 20.0 5.5 18.6 5.1 17.7 4.9 16.8 4.6 15.8 4.4 14.9 4.1 13.4 3.7
52.5% 47.3 16.6 46.0 16.2 44.7 15.7 43 15.3 42.0 14.8 40.6 14.3 39 13.8 37.7 13.2 36.2 12.7 34.2 12.0 32.1 11.3 30.1 10.5 28.0 9.8 26.4 9.3 24.8 8.7 23.1 8.2 21.5 7.6 19.4 6.8
DC 800H
55% 50.3 17.6 48.9 17.1 47.5 16.6 46 16.1 44.6 15.6 43.1 15.1 42 14.6 40.0 14.0 38.5 13.5 36.3 12.7 34.2 12.0 32.0 11.2 29.8 10.4 28.1 9.8 26.4 9.2 24.6 8.6 22.9 8.0 20.6 7.2
52.5% 75.2 33.0 73.1 32.1 71 31.2 69 30.2 66.8 29.3 64.6 28.3 62 27.4 60.1 26.4 57.9 25.4 54.6 23.9 51.2 22.5 47.9 21.0 44.5 19.5 42.3 18.5 40.1 17.6 37.8 16.6 35.6 15.6 32 14
DC 1000H
55% 80.0 35.0 77.8 34.0 75.5 33.0 73 32.0 71.0 31.0 68.6 30.0 66 29.0 63.9 27.9 61.5 26.9 58.0 25.4 54.4 23.8 50.9 22.3 47.3 20.7 45.0 19.7 42.6 18.7 40.3 17.6 37.9 16.6 33.9 14.8
52.5% 99.5 50.2 96.7 48.8 93.9 47.4 91 46.0 88.3 44.6 85.4 43.1 82 41.7 79.5 40.2 76.5 38.7 72.1 36.5 67.7 34.2 63.3 32.0 58.9 29.7 56.0 28.2 53.0 26.8 50.1 25.3 47.1 23.8 42.5 21.4
DC 1150H
55% 105.8 53.2 102.8 51.7 99.9 50.2 97 48.7 93.9 47.2 90.8 45.6 88 44.1 84.5 42.5 81.4 40.9 76.7 38.6 72.0 36.2 67.3 33.9 62.6 31.5 59.5 29.9 56.4 28.4 53.2 26.8 50.1 25.2 46.5 22.7
52.5% 117.6 64.5 114.3 62.7 111 60.9 108 59.1 104.3 57.3 100.8 55.4 97 53.5 93.9 51.5 90.4 49.6 85.2 46.8 80.0 43.9 74.8 41.1 69.6 38.2 66.1 36.3 62.6 34.4 59.1 32.4 55.6 30.5 50 27.4
DC 1250H
55% 125.0 68.3 121.5 66.4 118.0 64.5 114 62.5 110.9 60.6 107.2 58.6 104 56.6 99.8 54.6 96.1 52.6 90.6 49.6 85.0 46.5 79.5 43.5 73.9 40.4 70.2 38.4 66.6 36.4 62.9 34.3 59.2 32.3 53.0 29.0
52.5% 158.2 100.7 153.8 97.9 149.3 95.1 145 92.2 140.4 89.4 135.7 86.4 131 83.5 126.4 80.5 121.7 77.5 114.7 73.0 107.7 68.6 100.6 64.1 93.6 59.6 88.9 56.6 84.3 53.7 79.6 50.7 74.9 47.7 67.4 42.9
DC 1450H
55% 168.2 106.6 163.5 103.6 158.8 100.7 154 97.7 149.3 94.7 144.3 91.5 139 88.4 134.4 85.2 129.4 82.0 121.9 77.3 114.5 72.6 107.0 67.8 99.5 63.1 94.5 60.0 89.6 56.8 84.6 53.7 79.6 50.5 71.4 45.5
52.5% 192.6 135.3 187.2 131.5 181.8 127.7 176 123.9 171.0 120.1 165.3 116.1 160 112.1 153.9 108.1 148.2 104.1 139.7 98.1 131.1 92.1 122.6 86.1 114.0 80.1 108.3 76.1 102.6 72.1 96.9 68.1 91.2 64.1 82.1 57.7
DC 1600H
55% 204.7 143.3 199.0 139.3 193.2 135.3 187 131.2 181.7 127.2 175.7 123.0 170 118.7 163.6 114.5 157.5 110.2 148.4 103.8 139.4 97.3 130.3 90.9 121.2 84.4 115.1 80.3 108.9 76.1 102.8 72.0 96.9 67.8 87.0 61.2
52.5% 217.4 162.3 211.3 157.8 205.2 153.2 199 148.7 193.0 144.1 186.6 139.3 180 134.5 173.7 129.7 167.3 124.9 157.7 117.7 148.0 110.5 138.4 103.2 128.7 96.0 122.3 91.2 115.8 86.4 109.4 81.6 102.9 76.8 92.5 69.1
DC 1700H
55% 231.1 171.9 224.6 167.1 218.2 162.2 212 157.4 205.2 152.5 198.4 147.4 192 142.4 184.7 137.3 177.8 132.2 167.6 124.6 157.3 117.0 147.1 109.3 136.8 101.7 130.0 96.6 123.1 91.6 116.3 86.5 109.4 81.4 98.1 73.2
52.5% 300.0 264.3 291.8 256.9 283.6 249.5 275 242.0 267.1 234.6 258.2 226.8 249 219.0 240.4 211.1 231.5 203.3 218.2 191.6 204.8 179.9 191.5 168.1 178.1 156.4 169.2 148.6 160.3 140.8 151.4 132.9 142.5 125.1 128.2 112.5
DC 2000H
55% 319.9 279.8 310.9 272.0 301.9 264.1 293 256.3 283.9 248.4 274.5 240.1 265 231.9 255.6 223.6 246.1 215.3 231.9 202.9 217.7 190.5 203.5 178.0 189.3 165.6 179.8 157.3 170.4 149.1 160.9 140.8 151.4 132.5 135.9 119.3
52.5% 422.8 417.7 410.9 405.8 399 393.9 387 381.9 375.2 370.0 362.7 357.8 350 345.7 337.7 333.5 325.2 321.3 306.5 302.8 287.7 284.3 269.0 265.7 250.2 247.2 240.8 237.9 231.4 228.7 222.0 219.4 212.6 210.1 191.2 189
DC 2250H
55% 449.4 442.3 436.8 429.9 424.2 417.4 412 405.0 398.9 392.5 385.6 379.4 372 366.4 359.0 353.3 345.7 340.2 325.8 320.6 305.8 301.0 285.9 281.3 265.9 261.7 255.9 251.9 246.0 242.1 236.0 232.2 226.0 222.4 202.7 200.3
52.5% 522.0 573.0 507.3 556.9 492.7 540.8 478 524.7 463.3 508.6 447.9 491.7 432 474.7 417.0 457.8 401.5 440.8 378.3 415.4 355.2 390.0 332.0 364.5 308.8 339.1 297.2 326.4 285.7 313.7 274.1 300.9 262.5 288.2 236.2 259.3
DC 2500H
55% 554.9 606.7 539.1 589.7 523.6 572.6 508 555.6 492.5 538.5 476.1 520.6 460 502.6 443.2 484.7 426.8 466.7 402.2 439.8 377.6 412.9 352.9 385.9 328.3 359.0 316.0 345.5 303.7 332.1 291.4 318.6 279.1 305.1 250.4 274.9
52.5% 720.0 850.0 710 820.5 700 791.0 690 761.5 680.0 732.0 655.0 716.5 630 701.0 605.0 685.5 580.0 670.0 545.0 630.0 510.0 590.0 475.0 550.0 440.0 510.0 423.8 490.0 407.5 470.0 391.3 450.0 375.0 430.0 337.4 386.8
DC 3000H
55% 750.0 900.0 737.5 875.0 725.0 850.0 713 825.0 700.0 800.0 693.8 780.0 688 760.0 681.3 740.0 675.0 720.0 636.3 676.3 597.5 632.5 558.8 588.8 520.0 545.0 500.0 522.8 480.0 500.5 460.0 478.3 440.0 465.0 357.6 410.0
T
OC
OD
OE
OB
H
G
A
DETAIL Y
DCN 300H 300 500 295 440 255 4 X M20 4 X M20 150 15 35
DCN 350H 350 570 330 510 275 4 X M20 4 X M20 150 15 45
DCN 400H 400 650 390 585 340 4 X M24 4 X M24 175 20 75
DCN 500H 500 800 490 730 425 4 X M24 4 X M24 175 25 145
DCN 550H 550 880 540 790 470 4 X M24 4 X M24 175 25 195
DCN 600H 600 960 590 875 515 4 X M30 4 X M30 225 30 250
DCN 700H 700 1120 685 1020 600 4 X M30 4 X M30 225 35 400
DCN 800H 800 1280 785 1165 685 6 X M30 6 X M30 225 35 610
DCN 900H 900 1440 885 1313 770 6 X M30 6 X M30 225 35 850
DCN 1000H 1000 1600 980 1460 855 6 X M36 6 X M36 275 35 1125
DCN 1050H 1050 1680 1030 1530 900 6 X M36 6 X M36 275 40 1365
DCN 1100H 1100 1760 1080 1605 940 8 X M36 8 X M36 275 40 1550
DCN 1200H 1200 1920 1175 1750 1025 8 X M42 8 X M42 325 40 1975
DCN 1300H 1300 2080 1275 1900 1100 8 X M48 8 X M48 375 40 2460
DCN 1400H 1400 2240 1370 2040 1195 8 X M48 8 X M48 375 50 3110
DCN 1600H 1600 2560 1570 2335 1365 8 X M48 8 X M48 375 60 4650
DCN 1800H 1800 2880 1765 2625 1540 10 X M56 10 X M56 440 60 6620
DCN 2000H 2000 3200 1955 2920 1710 10 X M56 10 X M56 440 90 9560
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
28 www.irmome.com
DIPTI CONE FENDERS DCN SERIES
“DIPTI” DCN series Cone Fenders are an improved version of Cell type Fender recently introduced and recommended for all type of
applications including high tidal variation sites. The most advanced feature of “DIPTI” Cone Fenders is that, it can be deflected up to 72%,
which of fers more Energy Absorption with lesser height vis‐à‐vis any equivalent Fenders. This advanced feature of lesser height of
Fenders improves material handling capabilities of Deck / Vessel Cranes which reduces overall cost of the project. Due to the geometrical
shape of the Fenders it can deflect more and it can absorb more energy from any direction. “DIPTI” Cone Fenders allow angular ber thing
without any loss in their energy absorption. “DIPTI” Cone Fenders proved its superiority withstanding cyclic test more than 10000 cycles
at full Load. “DIPTI” DCN series Cone Fenders are available from 300 mm height to 2000 height supplied with suitable Frontal Frames and
Chains as required.
PERFORMANCE TABLE
R1 R1.1 R1.2 R1.3 R2 R2.1 R2.2 R2.3 R3 R3.1 R3.2 R3.3 R4
MODEL NO. DEFLECTION
R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M) R(T) E(T‐M)
DCN 300H 72.0% 11.3 2.0 10.8 1.9 10.3 1.8 9.6 1.7 8.9 1.6 8.3 1.5 7.7 1.4 7.1 1.3 6.4 1.2 6.0 1.1 5.5 1.0 5.2 0.9 5.0 0.9
DCN 350H 72.0% 15.4 3.2 14.7 3.1 14.1 2.9 13.0 2.7 12.0 2.5 11.3 2.4 10.5 2.2 9.6 2.0 8.8 1.8 8.2 1.7 7.5 1.6 7.2 1.5 6.8 1.4
DCN 400H 72.0% 20.3 4.8 19.4 4.6 18.5 4.4 17.1 4.1 15.8 3.8 14.8 3.5 13.8 3.3 12.6 3.0 11.5 2.8 10.7 2.6 9.9 2.4 9.4 2.2 8.9 2.1
DCN 500H 72.0% 31.7 9.5 30.3 9.0 28.8 8.6 26.8 8.0 24.8 7.4 23.2 6.9 21.6 6.5 19.8 5.9 18.0 5.4 16.8 5.0 15.5 4.6 14.7 4.4 14.0 4.2
DCN 550H 72.0% 38.2 12.6 36.5 12.0 34.8 11.4 32.3 10.6 29.9 9.8 28.0 9.2 26.1 8.6 24.0 7.9 21.8 7.2 20.2 6.7 18.7 6.1 17.7 5.8 16.8 5.5
DCN 600H 72.0% 45.1 16.2 43.0 15.4 41.0 14.7 37.6 13.5 34.1 12.2 31.4 11.3 28.7 10.3 26.6 9.5 24.5 8.8 22.9 8.2 21.4 7.7 20.3 7.3 19.3 6.9
DCN 700H 72.0% 61.3 25.6 58.5 24.5 55.8 23.3 51.9 21.7 48.0 20.1 45.0 18.8 42.0 17.6 38.9 16.3 35.9 15.0 33.8 14.1 31.7 13.3 30.1 12.6 28.5 11.9
DCN 800H 72.0% 81.5 39.0 77.8 37.2 74.1 35.4 68.7 32.8 63.3 30.3 59.1 28.2 54.8 26.2 50.7 24.2 46.6 22.3 43.6 20.9 40.7 19.4 38.6 18.5 36.6 17.5
DCN 900H 72.0% 102.8 55.3 98.1 52.8 93.5 50.3 86.5 46.5 79.5 42.8 74.1 39.8 68.6 36.9 63.8 34.3 58.9 31.7 55.6 29.9 52.3 28.1 49.7 26.7 47.1 25.3
DCN 1000H 72.0% 127.1 76.0 121.4 72.5 115.6 69.1 107.0 63.9 98.4 58.8 91.7 54.8 85.0 50.8 78.8 47.1 72.7 43.4 68.5 40.9 64.2 38.4 61.0 36.5 57.8 34.5
DCN 1050H 72.0% 140.1 87.9 133.7 83.9 127.3 79.9 117.9 74.0 108.5 68.1 101.1 63.4 93.7 58.8 87.0 54.6 80.2 50.3 75.5 47.4 70.8 44.5 67.3 42.2 63.8 40.0
DCN 1100H 72.0% 153.5 100.9 146.5 96.3 139.6 91.7 129.3 85.0 119.1 78.3 111.1 73.0 103.1 67.7 95.6 62.8 88.1 57.9 82.8 54.4 77.6 51.0 73.7 48.4 69.8 45.9
DCN 1200H 72.0% 182.9 131.1 174.6 125.2 166.3 119.2 154.1 110.5 141.9 101.8 132.4 95.0 122.9 88.2 114.0 81.8 105.1 75.4 98.9 70.9 92.7 66.4 88.0 63.1 83.4 59.8
DCN 1300H 72.0% 214.8 166.9 205.0 159.3 195.3 151.7 180.8 140.4 166.3 129.2 154.9 120.4 143.6 111.6 133.3 103.5 122.9 95.5 115.7 89.9 108.5 84.3 103.1 80.1 97.7 75.9
DCN 1400H 72.0% 249.2 208.5 237.9 199.1 226.6 189.6 209.8 175.5 193.0 161.4 179.9 150.5 166.8 139.5 154.7 129.5 142.7 119.4 134.3 112.4 125.9 105.3 119.6 100.1 113.4 94.8
DCN 1600H 72.0% 325.3 311.0 310.5 296.9 295.7 282.8 273.8 261.8 251.9 240.8 234.8 224.5 217.7 208.2 201.9 193.1 186.1 178.0 175.0 167.4 163.9 156.7 155.7 148.9 147.5 141.0
DCN 1800H 72.0% 412.3 443.5 393.6 423.4 374.8 403.2 347.0 373.3 319.3 343.4 297.6 320.1 275.9 296.8 255.9 275.3 235.9 253.7 221.9 238.7 207.8 223.6 197.5 212.4 187.1 201.2
DCN 2000H 72.0% 507.1 606.1 484.1 578.6 461.1 551.1 426.8 510.1 392.5 469.1 365.7 437.1 338.9 405.1 314.5 375.9 290.1 346.7 273.0 326.3 256.0 305.93 243.2 290.6 230.4 275.3
( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
‐ 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 29
DIPTI PNEUMATIC FENDERS
TOWING RING
ØD
'D' SHACKLE
FOR MEDIUM AND LARGE FENDERS (DIA 1500 AND ABOVE) FOR SMALL FENDERS (UP TO 1350 DIA)
CHAIN
EYE BOLT
ØD
SWIVEL JOINT
30 www.irmome.com
DIPTI PNEUMATIC FENDERS
“DIPTI” DPN series Pneumatic Fenders are manufactured as per ISO 17357: 2002 with 0.5 Kg/Cm2 and 0.8 Kg/Cm2 internal pressure.
These Fenders are ex tensively used for ship to ship transfers at mid seas, double banking operation as well as vessel to ber th at dock/jet ty.
The Special proper ty of Pneumatic fender is it’s Low reaction force at low Deflection. This very proper ty of Pneumatic makes it most
suitable fender for Liquid cargo Vessels and Defense vessels with very sensitive equipments. These Fenders of fer excellent Energy
Absorption characteristic and do have a linear Load Deflection Characteristic. They are very easy to install, remove and handle for various
applications. These Fenders are generally equipped with chain nets and tyres, or with wire rope nets with End Rings, Towing Rings, and
Swivel Joint with suitable D-Shackles at both ends for bet ter life. Sling type fenders are also available on specific request. These Fenders
of fer excellent resistance to Shear Force, inclined compression and highly reliable. The care fully craf ted high abrasion resistant ex ternal
layer prevents atmospheric aging and Nylon tyre cord layers ensure high mechanical strength under heavy compression. Internal rubber
layers ensure a positive seal to maintain the desired internal pressure. The latest moulding technology, a combination of heat, pressure and
compression moulding and accurate process parameters makes our pneumatic fender ex tremely reliable and ensure a trouble free long
life. Our DPN series Fenders are also used in ver tical position with buoyancy ballast for Submarine application. “DIPTI” Pneumatic Fenders
are also supplied in grey colour for nonstaining / Naval Applications. “Dipti” DPN series Pneumatic Fenders are available in wide range from
500mm Diameter to 4500mm Diameter in 1000mm Length to 12000mm Length as per customers requirements.
DIMENSION TABLE
WEIGHT ON NET TYPE
SAFETY VALVE TESTING
APP. FENDER APP. FENDER APPROX. WEIGHT ON NET
MODEL NO. OD L SETTING PRESS. PRESSURE
THICKNESS Kg/cm2 Kg/cm2 BODY WEIGHT CHAIN NET WIRE NET SYNTHETIC
Kg Kg Kg FIBRE NET Kg
DPN 2000 2000 3500 15/18 1.8 2.0 510 1125 570 -
DPN 2500 2500 4000 15/20 1.8 2.5 775 1390 875 -
DPN 2500 2500 5500 15/20 1.8 2.5 1025 1900 1350 -
DPN 3300 3300 4500 20/25 1.8 2.5 1725 2200 1700 -
DPN 3300 3300 6500 20/25 1.8 2.5 2230 3600 2650 -
DPN 3300 3300 10600 20/25 1.8 2.5 2900 5950 4490 -
DPN 4500 4500 9000 25/30 1.8 2.5 4650 5850 4350 -
DPN 4500 4500 12000 25/30 1.8 2.5 6000 8200 6000 -
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 31
DIPTI PNEUMATIC FENDERS
PERFORMANCE TABLE
INITIAL GUARANTEED ENERGY REACTION FORCE AT GUARANTEED ENERGY REACTION FORCE AT GUARANTEED ENERGY REACTION FORCE AT
NOMINAL SIZE
INTERNAL ABSORPTION (GEA) GEA DEFLECTION R ABSORPTION (GEA) GEA DEFLECTION R ABSORPTION (GEA) GEA DEFLECTION R
DIAMETER X PRESSURE R (T) R (T) R (T)
DEFLECTION DEFLECTION DEFLECTION
LENGTH Kg/cm
2
50% E (T-M) +
- 5% TOLERANCE +- 10% 55% E (T-M) +
- 5% TOLERANCE +- 10% 60% E (T-M) +
- 5% TOLERANCE +- 10%
500 X 1000 0.5 0.4 3.8 0.5 4.9 0.7 6.5
600 X 1000 0.5 0.5 4.4 0.7 5.6 0.9 7.5
660 X 1160 0.5 0.6 5.5 0.8 7.1 1.0 9.5
700 X 1500 0.5 1.0 8.1 1.4 10.4 1.8 13.9
1000 X 1500 0.5 1.9 10.7 2.4 13.8 3.2 18.4
1000 X 2000 0.5 2.7 15.0 3.5 19.4 4.6 25.9
1200 X 2000 0.5 3.7 17.3 4.8 22.4 6.4 29.9
1350 X 2500 0.5 6.0 24.9 7.7 32.2 10.3 42.9
1500 X 3000 0.5 8.9 33.6 11.5 43.4 15.3 57.9
1700 X 3000 0.5 11.2 37.1 14.5 47.9 19.3 63.9
2000 X 3500 0.5 17.9 50.9 23.2 65.8 30.9 87.7
2500 X 4000 0.5 38.6 80.2 49.9 103.7 66.5 138.2
2500 X 5500 0.5 54.8 117.2 70.9 151.5 94.5 202
3300 X 4500 0.5 68.2 109.4 88.2 141.5 117.6 188.7
3300 X 6500 0.5 105.3 175.2 136.1 226.5 181.5 302
3300 X 10600 0.5 177.9 304.9 230.0 394.3 306.7 525.7
4500 X 9000 0.5 275.6 333.3 356.4 431.0 475.2 574.7
4500 X 12000 0.5 375.4 463.1 485.5 598.8 647.3 798.4
INITIAL GUARANTEED ENERGY REACTION FORCE AT GUARANTEED ENERGY REACTION FORCE AT GUARANTEED ENERGY REACTION FORCE AT
NOMINAL SIZE
INTERNAL ABSORPTION (GEA) GEA DEFLECTION R ABSORPTION (GEA) GEA DEFLECTION R ABSORPTION (GEA) GEA DEFLECTION R
DIAMETER X PRESSURE R (T) R (T) R (T)
DEFLECTION DEFLECTION DEFLECTION
LENGTH Kg/cm
2
50% E (T-M) +
- 5% TOLERANCE +- 10% 55% E (T-M) +
- 5% TOLERANCE +- 10% 60% E (T-M) +
- 5% TOLERANCE +- 10%
500 X 1000 0.8 0.5 5.0 0.7 6.5 0.9 8.6
600 X 1000 0.8 0.7 5.8 0.9 7.5 1.2 10
660 X 1160 0.8 0.9 8.1 1.2 10.5 1.6 14
700 X 1500 0.8 1.5 10.6 2.0 13.7 2.6 18.2
1000 X 1500 0.8 2.7 13.9 3.5 17.9 4.7 23.9
1000 X 2000 0.8 3.7 19.6 4.7 25.4 6.3 33.8
1200 X 2000 0.8 5.2 22.7 6.8 29.3 9.0 39.1
1350 X 2500 0.8 8.3 32.7 10.7 42.2 14.3 56.3
1500 X 3000 0.8 12.5 44.3 16.1 57.2 21.5 76.3
1700 X 3000 0.8 15.5 48.7 20.0 63.0 26.7 84
2000 X 3500 0.8 24.9 66.7 32.3 86.3 43.0 115
2500 X 4000 0.8 53.8 105.4 69.5 136.3 92.7 181.7
2500 X 5500 0.8 76.4 154.0 98.9 199.1 131.8 265.5
3300 X 4500 0.8 95.1 143.6 123.0 185.7 164.0 247.6
3300 X 6500 0.8 146.9 229.7 189.9 297.1 253.2 396.1
3300 X 10600 0.8 248.4 400.8 321.2 518.3 428.3 691.1
4500 X 9000 0.8 384.8 438.0 497.6 566.3 663.5 755.1
4500 X 12000 0.8 524.1 608.4 677.8 786.8 903.7 1049
(R: REACTION FORCE E: ENERGY ABSORPTION TOLERANCE: +
_ 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
32 www.irmome.com
DIPTI PNEUMATIC FENDERS
www.irmome.com 33
DIPTI HYDRO PNEUMATIC FENDERS
D Schematic diagram of Submarine Ber thing with
Hydro‐Pneumatic fenders.
SUBMARINE
SEA LEVEL
AIR
LENGTH
W
BALLAST WEIGHT
DIMENSIONS TABLE
Special features :
PERFORMANCE TABLE
The above per formance are based on the following : Energy : KN. Mtrs / Reaction : KN.
Air Water propor tion : 35 : 65. Internal Air Pressure : 0.5 bar.
The Per formance of the Hydro-pneumatic fenders can be varied by adjusting the Air water ratio and Internal pressure.
www.irmome.com 35
DIPTI ROLLER FENDERS DRF SERIES
DRF2
T
H
L2
T
OD
W
L1
T
DRF1
DRF3
L3
T
T
PERFORMANCE TABLE
DRF1 DRF1.1 DRF2 DRF2.1 DRF3 DRF3.1
DEFLECTION
(MM)
MODEL NO.
R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
DRF 060 20 125 6.8 0.3 10.2 0.4 13.6 0.5 17 0.6 20.4 0.7 23.8 0.8
DRF 075 25 159 10.6 0.5 15.9 0.7 21.3 0.9 26.8 1.2 32.2 1.5 37.7 1.8
DRF 090 30 185 15.5 0.9 23.1 1.3 30.7 1.6 38.5 2.1 46.3 2.5 54.1 3.0
DRF 120 40 260 27.3 1.9 41.2 2.9 55.0 3.9 69 4.9 83.0 5.8 97.0 6.8
DRF 150 50 325 42.8 3.7 64.7 5.8 86.5 7.8 107.9 9.7 129.3 11.6 150.7 13.5
DRF 175 60 368 52 5.6 77.8 8.4 103.5 11.2 130.1 14.1 156.6 16.9 183.2 19.8
DRF 180 60 390 62.0 6.5 93.1 10 124.1 13.5 155.3 16.8 186.4 20.1 217.6 23.4
DRF 210 70 455 84.3 10.8 126.3 15.7 168.3 20.6 210.3 25.8 252.2 31.0 294.2 36.2
DRF 240 80 510 110. 14.6 165.1 21.7 220.2 28.7 275.1 35.6 330.0 42.5 384.9 49.4
DRF 270 90 578 139.5 22.2 208.8 33.5 278 44.8 347.6 55.9 417.2 67.0 486.8 78.1
DRF 300 100 640 170.5 30.7 256.5 45.9 342.5 61.0 427.9 76.6 513.2 92.1 598.6 107.7
( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 37
DIPTI ROLLER FENDERS DR SERIES
T
DR2
H
L2
T
OD
W
L1
T
DR1
T
L3
T
DR3
T
“DIPTI” DR series Roller Fenders are the right choice to protect your Structures while moving Vessel is touching to dock wall / entrance
channel or Vessel coming for dry docking. These Fenders are ex tremely robust and could absorb large impacts without deformation and
guide floating Vessels / Barges without damaging the structure. These Fenders are resistant to wear and tear more so, by the vir tue of its
capability to rotate in the direction of the Vessels and move inside of housing in the direction of impact because of the Special spring type
design. By its rotating motion it neutralizes a large amount of the shear force and because of its special spring type design reduces impact
energy. These Fenders are also recommended for narrow entries, exits, corners etc. These Fenders can be installed ver tically to
accommodate rolling and pitching of Vessels during loading and unloading of cargo. These are the Fenders, which can adequately cope up
with lateral / grazing loading when the Vessels move parallel to the Whar f. In case of this modified version, since the Roller is capable of
horizontal movement, it can absorb the impact more smoothly vis a vis the fixed type Roller Fenders. These are manufactured using special
technology for a uniform deflection of the Rollers at its circumference and a smooth movement (Rotation) in the direction the force and
ensure a safe passage to the Vessels without damaging the structures. The superior moulding technology employed in our high pressure
thermic fluid heated hydraulic presses ensure long life and trouble free per formance.
“DIPTI” DR series Roller Fenders are available in wide range from 1200mm diameter to 3000mm diameter per fectly mechanized and
assembled in high tensile steel fabricated housing painted with high build epoxy paint with suitable lubrication system to ensure trouble
free operations. If required we can also provide our services for supervising installation of our Roller Fenders. All the Roller Fenders are
supplied with complete details of all par ts / components and Periodic Maintenance and Service Manual which help customers to get
ma ximum service life of Roller Fender.
PERFORMANCE TABLE
DR 120 40 430 25.1 4.9 37.7 7.4 50.3 9.9 62.9 12.4 75.4 14.8 88.0 17.3
DR 150 50 540 39.4 9.6 59.2 14.5 78.9 19.4 98.5 24.3 118 29.1 137.6 34
DR 175 60 630 47.7 14.3 71.4 21.6 95 28.8 119 35.1 143 41.3 167 47.6
DR 180 60 650 56.8 17.0 84.9 25.7 113 34.3 141.5 41.8 170 49.2 198.5 56.7
DR 210 70 760 77.5 26.2 116.3 39.3 155 52.3 193.5 65.5 232 78.6 270.5 91.8
DR 240 80 850 100 39.5 151 59.5 202 79.4 252 98.2 302 117 352 135.8
DR 270 90 960 128 56.1 192 84.1 256 112 320.5 140 385 168 449.5 196
DR 300 100 1080 158 77.2 236 116.1 314 (155
R : REACTION
394.5FORCE E : ENERGY
192 475ABSORPTION
229 TOLERANCE
555.5 +- 10%)
266
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 39
DIPTI ROLLER FENDERS DRS SERIES
MODEL NO. W B H D L F G T J á
DRS 110-45 1700 1000 1450 1080 900 350 450 460 650 0-40
0
DRS 130-50 2000 1200 1750 1300 1000 350 550 510 850 0-40
0
DRS 175-70 2650 1500 2200 1750 1150 550 700 690 950 0-40
0
DRS 200-75 2750 1750 2550 1980 1250 600 800 760 1250 0-45
0
DRS 250-100 3350 2200 3200 2550 1600 850 1000 970 1350 0-45
0
DRS 290-110 4200 2500 3750 2900 1700 1000 1250 1000 1500 0-45
0
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
40 www.irmome.com
DIPTI ROLLER FENDERS DRS SERIES
“DIPTI” DRS series Roller Fenders are the right choice to protect your Structures while moving Vessel is touching to dock wall / entrance
channel or Vessel coming for dry docking. These Fenders are ex tremely robust and could absorb large impacts without deformation and
guide floating Vessels / Barges without damaging the structure. These Fenders are resistant to wear and tear more so, by the vir tue of its
capability to rotate in the direction of the Vessels and move inside of housing in the direction of impact because of the Special spring type
design. By its rotating motion it neutralizes a large amount of the shear force and because of its special spring type design reduces impact
energy. These Fenders are also recommended for narrow entries, exits, corners etc. These Fenders can be installed ver tically to
accommodate rolling and pitching of Vessels during loading and unloading of cargo. These are the Fenders, which can adequately cope up
with lateral / grazing loading when the Vessels move parallel to the Whar f. In case of this modified version, since the Roller is capable of
horizontal movement, it can absorb the impact more smoothly vis a vis the fixed type Roller Fenders. These are manufactured using special
technology for a uniform deflection of the Rollers at its circumference and a smooth movement (Rotation) in the direction the force and
ensure a safe passage to the Vessels without damaging the structures. The superior moulding technology employed in our high pressure
thermic fluid heated hydraulic presses ensure long life and trouble free per formance.
“DIPTI” DRS series Roller Fenders are available in wide range from 1100mm diameter to 2900mm diameter per fectly mechanized and
assembled in high tensile steel fabricated housing painted with high build epoxy paint with suitable lubrication system to ensure trouble
free operations. If required we can also provide our services for supervising installation of our Roller Fenders. All the Roller Fenders are
supplied with complete details of all par ts / components and Periodic Maintenance and Service Manual which help customers to get
ma ximum service life of Roller Fender.
PERFORMANCE TABLE
DRS 1
MODEL NO DEFLECTION
R(T) E(T-M)
DRS 110-45 400 15.3 3.36
DRS 130-50 500 22.4 6.22
DRS 175-70 600 32.1 10.2
DRS 200-75 700 60.1 22.5
DRS 250-100 925 93.8 44.9
DRS 290-110 1200 132.5 89.7
W
Q S S Q H
DSS 250H M24 150 515 1 150 760 1 150 675 2 150 630 3 150 755 3 - - -
maintenance free. Strip Fenders are made of high abrasion resistant Poly
W Urathane Rubber with steel inser t and of fer excellent resistance to sea water,
ozone aging and ultra violet rays.
Q
S
SxT
L
S
PERFORMANCE TABLE
L500 L1000 L1500 L2000 L2500
MODEL NO. BOLT
Q S T Q S T Q S T Q S T Q S T
DSF 100H M18 110 330 1 110 830 1 110 665 2 110 610 3 - - -
DSF 130H M20 110 330 1 110 830 1 1110 66
665 2 110 610 3 111 776 3
DSF 150H M22 110 330 1 110 830 1 110 665 2 110 610 3 111 776 3
DSF 200H M22 110 330 1 110 830 1 110 665 2 110 610 3 111 776 3
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.irmome.com 43
DIPTI CORNER ARCH FENDER DCA SERIES
“DIPTI” DCA series Corner Arch Fenders are economical and
ex tensively used to protect corner of ber thing Structures / Jet ties from
the impact of moving Vessel / Boats. These Fenders are also used for
entrance channel protection also. These mechanically strong but
resilient mechanisms ensure long life to the structure. They protect the
vessel and craf ts from damaging themselves too. These Fenders are
ex tremely robust and absorb large impacts of floating Vessels / Boats
without damaging the structure. Our DCA Fenders are made of high
abrasion resistant compound which enhance Fender life under severe
working conditions. These Fenders of fers excellent resistance to ultra
violet rays, ozone aging and sea water.
L
P C P C
B
A
A
B
d
e
d
e
2d 2d
f f
0W
0W
H L
H
L
A
P
T
C
250
1000
250
750
500
45°
250
250
250
250 250
250 750 150-200
1000
500
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
LENGTH CAN BE VERY AS PER SPECIFIC REQUIREMENT OF CLIENT.
www.irmome.com 45
DIPTI DDA FENDERS TYPE A
1000
P I P
A
B
1500
Q J J Q C
G
2000
D
X
H
R K k' K R
2500
F
S M m' M S
W
3000
T N n' n' N T
3500
DETAIL X
U O o' o' O U
MODEL
H A B C D F G P Q R S T U I J K M N O k’ m’ n’ o’ W
NO.
DDA 150H 150 320 260 95 20 190 50 150 150 150 150 150 150 700 600 550 750 650 800 600 700 700 800 M20
DDA 200H 200 380 310 125 30 250 55 150 150 150 150 150 150 700 600 550 750 650 800 600 700 700 800 M24
DDA 250H 250 500 400 155 40 315 60 150 150 150 150 150 150 700 600 550 750 650 800 600 700 700 800 M24
DDA 300H 300 645 530 188 60 375 85 250 250 250 250 250 250 500 1000 500 500 750 750 500 1000 500 750 M33
DDA 400H 400 840 710 250 60 500 135 250 250 250 250 250 250 500 500 500 500 750 750 500 1000 500 750 M39
DDA 500H 500 1000 860 315 60 625 190 250 250 250 250 250 250 500 500 400 650 400 650 700 1000 850 850 M45
DDA 600H 600 1210 1050 375 60 750 240 250 250 115 115 115 115 500 500 375 625 365 615 1020 1020 1020 1020 M48
DDA 800H 800 1550 1350 500 60 1000 335 130 130 130 130 115 115 740 620 345 595 365 615 1050 1050 1020 1020 M48
DDA 1000H 1000 1800 1600 625 60 1250 450 150 150 150 150 150 150 700 600 250 500 150 615 1200 1200 1200 985 M56
DDA 1300H 1300 2250 2330 815 60 1650 630 200 200 200 200 200 150 600 550 350 600 400 615 900 900 900 985 M64
“DIPTI” DDA series Fenders type A of fer excellent energy absorption capability with minimum transfer of frictional loads to the structure.
These Fenders are supplied with low friction rubbing board which of fers a unique solution to reduce the loads on the fender af ter ber thing
the vessel. These fender are easy to install and vir tually maintenance free. These Fenders are generally used for small to medium range
Vessels for rough and tough applications. These Fenders are manufactured from specialized rubber compound which of fers more
sturdiness to the Fenders for enhanced service life and gives excellent U.V resistance proper ty, resistance to ozone aging, resistance to
sea water. “DIPTI” DDA series Fenders are available in wide range from 150mm height to 1300mm height in dif ferent lengths up to 8 meter
single piece as per customers requirements.
PERFORMANCE TABLE
RUBBER GRADE R1 R2
MODEL NO. E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T)
DDA 150H 0.67 12.42 0.75 13.00 0.86 13.14 0.56 10.35 0.63 10.50 0.75 10.95
DDA 200H 1.20 16.56 1.34 17.10 1.53 17.52 1.00 13.80 1.12 13.95 1.28 14.60
DDA 250H 1.87 20.70 2.10 21.05 2.40 21.90 1.56 17.25 1.75 17.85 2.00 18.28
DDA 300H 2.70 24.84 3.02 25.25 3.45 26.28 2.25 20.70 2.52 21.00 2.88 21.90
DDA 400H 4.80 33.12 5.37 34.14 6.14 35.04 4.00 27.60 4.48 28.20 5.12 29.20
DDA 500H 7.50 41.40 8.40 42.28 9.60 43.80 6.25 34.50 7.00 35.10 8.00 36.50
DDA 600H 10.80 49.68 12.09 49.90 13.82 52.56 9.00 41.40 10.08 42.10 11.52 43.80
DDA 800H 19.20 66.24 21.50 68.17 24.57 70.08 16.00 55.20 17.92 57.10 20.48 58.40
DDA 1000H 30.00 82.80 33.60 86.10 38.40 87.60 25.00 69.00 28.00 71.25 32.00 73.00
DDA 1300H 50.70 107.64 56.78 110.25 64.89 113.88 42.25 89.70 47.32 90.58 54.08 94.90
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 47
DIPTI DDA FENDERS TYPE B
1000
1500
P I P
Q J J Q
2000
A
B
R K K’ K R
2500
C
G
D
S M M’ M S
3000
X
H
W
T N N’ N’ N T
3500
DETAIL X
U O o’ o’ O U
PERFORMANCE TABLE
RUBBER GRADE R1 R2
MODEL NO. E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T)
DDB 150H 0.67 12.42 0.75 13.00 0.86 13.14 0.56 10.35 0.63 10.50 0.75 10.95
DDB 200H 1.20 16.56 1.34 17.10 1.53 17.52 1.00 13.80 1.12 13.95 1.28 14.60
DDB 250H 1.87 20.70 2.10 21.05 2.40 21.90 1.56 17.25 1.75 17.85 2.00 18.28
DDB300H 2.70 24.84 3.02 25.25 3.45 26.28 2.25 20.70 2.52 21.00 2.88 21.90
DDB 400H 4.80 33.12 5.37 34.14 6.14 35.04 4.00 27.60 4.48 28.20 5.12 29.20
DDB 500H 7.50 41.40 8.40 42.28 9.60 43.80 6.25 34.50 7.00 35.10 8.00 36.50
DDB 600H 10.80 49.68 12.09 49.90 13.82 52.56 9.00 41.40 10.08 42.10 11.52 43.80
DDB 800H 19.20 66.24 21.50 68.17 24.57 70.08 16.00 55.20 17.92 57.10 20.48 58.40
DDB 1000H 30.00 82.80 33.60 86.10 38.40 87.60 25.00 69.00 28.00 71.25 32.00 73.00
DDB 1300H 50.70 107.64 56.78 110.25 64.89 113.88 42.25 89.70 47.32 90.58 54.08 94.90
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH ( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE +
- 10%)
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE ACHIEVE.
www.irmome.com 49
DIPTI FLAT BOARD FENDERS
SxT
W
Q S S Q H
“DIPTI” UHMW PE Pads will not crack or splinter from impact, and is more abrasion-resistant than hardened steel. With a lower coef ficient of
friction than glass, which reduces the ber thing friction, enormous wear & tear of Fenders and prevent cuts and shear failure of Fenders. “DIPTI”
UHMW PE Pads will withstand the most severe movement of Ship's hull without scraping away paints.
““DIPTI” UHMW PE Pads is impervious to common industrial chemicals and does not absorb water. This gives it the added advantage of a “non-
stick”, “non-freeze” characteristic, and ““DIPTI” UHMW PE Pads do not became brit tle even at sub-zero temperature.
Standard Colour of the “DIPTI” UHMW PE Pads will be Sky-Blue or Black or Orange. Pads in other colour can also be manufactured to suite specific
requirements.
51
TECHNICAL SPECIFICATION OF RUBBER
PROPERTY UNIT REQUIREMENT RELAVANT TESTING STANDARDS AND CONDATIONS
TENSILE 2
Kg/Cm MIN. 160 (ALT. ASTM D412 DIE C/BS 903 A.Z.)
STRENGTH
BEFORE JIS K 6301 ITEM 3 DUMBELL NO. 3
AGING ELONGATION % MIN. 350
(ALT. ASTM D2240 SHORE A DUROMETER/BS 903 A.Z.)
HARDNESS Deg. MA X. 77
JIS K 6301 ITEM 5 A TYPE TESTER
CHANGES IN % NOT LESS THAN 80%
AGING THROUGH AIR HEATING
TENSILE STRENGTH OF ORIGINAL VALUE
AFTER (ALT. ASTM D573 DIE C/BS 903 A.Z.)
CHANGES IN % NOT LESS THAN 80% 0
JIS K 6301 ITEM 6 DUMBELL NO. 3 70 C X 96 HRS.
AGING
ELONGATION OF ORIGINAL VALUE
(ALT. ASTM D2240 SHORE A DUROMETER/BS 903 A.Z.)
HARDNESS Deg. ORIGINAL VALUE +80 MAX.
JIS K 6301 ITEM 5 A TYPE TESTER
2 (ALT. ASTM D624 DIE B/BS 903 A.3.)
TEAR RESISTANCE Kg/Cm MIN. 70
JIS K 6301 ITEM 9 TEST PIECE TYPE A
0
70 C X 22 HRS. HEAT TREATMENT
COMPRESSION SET % MA X. 30
(ALT. ASTM D395/BS 903 A 6A)
JIS K 6301 ITEM 9 TEST PIECE TYPE A
All above tests for Rubber compound will be provided in our laboratory or any Reputed Test Laboratories like CIPET, Bayer (India) Ltd. etc.
52
PHOTO GALLERY - MARINE FENDERS
PHOTO GALLERY - MARINE FENDERS
51
Headquarter
Sales Offices
Sales Partners
Block No. 707/A-4, Nandoli Road, Rancharda, via Thaltej-Shilaj, Ahmedabad - 382115, Gujarat, India.
Phone : +91-79-26406664, +91-2764-260244 | Fax : +91-79-26402664, +91-2764-260245
Email : sales@irmome.com | Web : www.irmome.com
MEMBER