This document summarizes the specifications of two generator models: the PC70X-YT silent model and the FB70X-YT open model. Both are powered by a Tide Power LR4B3Z-D engine and alternator. They produce 62 kW of prime power and 77 kW of standby power at 0.8 power factor. Key details include the engine and alternator specifications, dimensions, weight, noise level, and control panel functions.
This document summarizes the specifications of two generator models: the PC70X-YT silent model and the FB70X-YT open model. Both are powered by a Tide Power LR4B3Z-D engine and alternator. They produce 62 kW of prime power and 77 kW of standby power at 0.8 power factor. Key details include the engine and alternator specifications, dimensions, weight, noise level, and control panel functions.
This document summarizes the specifications of two generator models: the PC70X-YT silent model and the FB70X-YT open model. Both are powered by a Tide Power LR4B3Z-D engine and alternator. They produce 62 kW of prime power and 77 kW of standby power at 0.8 power factor. Key details include the engine and alternator specifications, dimensions, weight, noise level, and control panel functions.
■ Model: Voltage (V) KW KVA KW KVA Amps 380/220 56 70 62 77 106.4 PC70X-YT(silent)/FB70X-YT(open) 400/254 56 70 62 77 101.0 220/127 56 70 62 77 183.7
Powered by TIDE POWER
SILENT VERSION
OPEN VERSION
■ General Specification
Engine Data Alternator Data
Engine brand Tide Power Alternator brand Tide Power Engine model LR4B3Z-D Alternator model Direct / Single Bearing Speed control type Electronic Phase / Poles 3-Phase / 4-Pole Starter motor voltage 24V Power Factor Cos Φ = 0.8 Engine speed (RPM) 1800 AVR Regulation Yes 110% prime power 18.9 Voltage Regulation ± 0.5 % Fuel 100% prime power 15.7 Insulation Class H Consumption (L/H) 75% prime power 12.6 Drip Proof IP23 50% prime power 9.4 Excitation Shunt
Ratings: All three phase generator sets are rated at 0.8 power factor. All single-phase generator sets are rated at 0.8 or 1.0 power factor.
(1) PRP (Prime Power):
Available continuously at variable load in lieu of commercially purchased power for an unlimited number of hours per year accordance with ISO8528-1, and an overload of 10% permitted for one hour in every twelve hours of operation in accordance with ISO 3046-1.
(2) ESP (Standby Power):
Emergency Standby Power in variable load applications in accordance with ISO8528-1 in the event of a utility power failure. No overload available for this service as relevant alternators are peak continuous rated at 27℃.
■ Engine Specification: ■ Standard Configuration
Basic technical data Accesories
No. of cylinders 4 Radiator Cylinder arrangement In-line Oil sensor Cycle 4 stroke Water temperature sensor Injection system Direct Oil drainage pump Aspiration type Turbocharger air filter, oil filter, fuel filter Compression ratio 17:1 Rubber anti-vibration mount Bore 108mm Ground Protection Stroke 125mm AVR Displacement 4.58L Battery charger Governor type Mechanical Maintenance free battery Oil capacity 14L Breaker Coolant capacity-engine 6L Control panel IP42
■ Dimensions ■ Control Panel Function Summary
Dimension and Weight Generator Protection and Functions
Dimension Open Silent Abnormal voltage Length (L) 1800mm 2600mm Over current Protection Width (W) 760mm 980mm Over Frecuency Protection Height (H) 1250mm 1300mm Short Circuit Protection Net Weight 850Kg 1300Kg Low Oil Pressure Protection Fuel Tank (h) - 8 High Temperature Protection Noise(dB) at 7m N/A <85 Alternator Charger Remote Start AMF (Auto Main Failure) Fault History Oil Pressure Visualization Water Temperature Visualization Fuel Meter Speed Battery Voltage Runing Hours
Standard reference Conditions:
Note: Standard reference condition 25°C[77°F] air inlet temp, 1000m(328ft) A.S.L 30% relative humidity. Fuel consumption data with diesel fuel with specific gravity of 0.85 and conforming to BS 2869: 1998, Class A2.