Professional Documents
Culture Documents
www.meccalte.it
Fax Numbers:
Sales 00 44 (0) 1572 771161
Services 00 44 (0) 1572 771162
Warehouse 00 44 (0) 1572 772400
AL Series DC Generators
Electronic regulated AC rectified to DC with high
transient responses, suitable for direct DC supply
or for battery charging applications
Performance Features
• Specific winding designs for each
project
• One or two bearing construction for
high for direct, belt or hydraulic drive
• Voltage, power (S1,S2,S3) with target
DC ripple levels are designed to suit
each application.
• Regulation using the Zanardi own
RT AVR, regulation +/-4%
• Powered from the auxiliary winding,
machines can be designed for large
transient power demands.
• RT regulator controls the peak and
lower level amps for battery charging
applications.
• Fixed and variable speed applications!
Battery Charging
In this application, it is important to
understand the charging profile of the
Applications battery type. Usually there is a period of
Designs are very specific to each application. Performances are tuned
various voltage (dictated by the battery)
to the requirement of each project. In the case of military, Mecc Alte /
and continuous amps. The peak amps
Zanardi have supplied 800A DC machines for helicopter GPU and UAV
drawn can be set by the RT regulator to
drone GPU where BS 2G 219 is required and target levels of 2V ripple
avoid over loading the generator! Then
peak to peak is necessary in a 48V system. This was achieved using a
there is the continuous voltage and
6 phase rectified AC winding. The telecom industry is looking more at
reducing amps. This is very battery
DC machines than before as the majority of loads are becoming DC
specific, but the lower level of amps can
rather than AC. Here the specification can vary with some accepting 8-
be controlled by the RT regulator as it
10% ripple (using 3 phase rectified machines) and others down to 4%.
senses the charge status of the battery.
The lower the ripple, the longer the battery life, so system selection
Current sensing CT and remote volts
becomes very important, both technically and commercially!
adjustment potentiometer are optional.
For even more onerous applications, we have high frequency multi-
Ripple is controlled selecting with the
pole AC machines for rectification to DC!
customer filters, operational speed, pole
number, and the choice between three,
Mecc Alte five or six phases bridge rectifier.
Mecc Alte is one of the largest producers of AC alternators in the world,
and quite proud to say that we are ‘independent’, with no affiliations to
engine or genset producers. Producing over 350,000 machines each Proven Capability
year, this Italian company specialise in high volume standard and also High levels of performance, with the
standard alternators filled with
specialised machines for such industries as rail, wind, military and of
performance enhancing features.
course aircraft support. We are pleased to be associated with the Supported through an experienced and
aircraft industry and will use all of the technical resources and computer assisted FEM design,
experience we have gained in all markets, to further adapt to the professional team able to evaluate all
changing demands for the GPU alternators, and the evolving DC tenders and ensure exceptional support
markets. both pre and post order