Professional Documents
Culture Documents
NUFLO™
2
MEASUREMENT SYSTEMS
3
MEASUREMENT SYSTEMS
Interface Software
• Provided at no charge
• Easy to use
• Internal links to hardware and
software manuals
The ModWorX Pro
• Real-time data polling software interface
• Complete configuration offers easy access
to the most
• Configuration upload tool for
commonly used
configuring multiple units functions from one
• Multi-level security main display screen.
• 1 to 12 calibration points
for each parameter
• Three methods: multi-point,
set zero point, and verify
Calibrate Inputs: Maintain Flow Run: Maintain Turbine: Configure:
• Inputs are automatically locked Differential Pressure Change Orifice Plate Change Turbine SYSTEM PARAMETERS
Static Pressure Change Cone Flowmeter Device ID
during calibration Process Temperature Change Gas Composition Change K-Factors Date and Time
Analog Input 1 Change Liquid Properties Communications
• Maintenance Analog Input 2 Change Steam Properties Security
• Change plate Calibrate, Verify and
Change Flow Coefficients Display
Change Avg. Pitot Tube Archive
• Change cone Set Zero Offset selectiions
available for each parameter.
Alarm
Modbus Registers
(linearization: 1 to 12 points) FLOW RUN SETUP
• Change averaging pitot tube Task-based menus help operators TURBINE SETUP
perform their jobs quickly and easily. INPUTS
• Change gas composition Differential Pressure
Static Pressure
• Change steam properties Process Temperature
Analog Inputs 1 & 2
• Change liquid parameters OUTPUTS
• Change flow coefficients Digital
Analog
• Change K-factor
(linearization: 1 to 12 points)
• Change turbine flowmeter
MEASUREMENT SYSTEMS
U S A • C A N A D A • U K • C H I N A • U A E • A L G E R I A • M A L AY S I A • I N D I A • R U S S I A w w w. c - a - m . c o m / f l o
EFM-2200 NF00153 1112 © Copyright 2011 Cameron International Corp. All Rights Reserved.