Professional Documents
Culture Documents
SUBJECT DESCRIPTION
MATHEMATICS
Set Theory, Principle of Inclusion and Exclusion, Theory of Equations, Worded Problems Involving
Review Module 01 - Algebra 1
Polynomials, Partial Fractions, Inequality, Domain and Range, Binomial Theorem.
1.01 Set Theory
1.02 Principle of Inclusion and Exclusion
1.03 Theory of Equations
1.04 Worded Problems Involving Polynomials
1.05 Partial Fractions
1.06 Inequality
1.07 Domain and Range
1.08 Binomial Theorem
Number Problems, Money Problems, Motion Problems, Age Problems, Clock Problems, Work Problems,
Review Module 02 - Algebra 2 Mixture Problems, Variation Problems, Arithmetic Progression, Geometric Progression, and Harmonic
Progression.
2.01 Number Problems
2.02 Money Problems
2.03 Motion Problems
2.04 Age Problems
2.05 Clock Problems
2.06 Work Problems
2.07 Mixture Problems
2.08 Variation Problems
2.09 Arithmetic Progression
2.10 Geometric Progression
2.11 Harmonic Progression
Distance between two points and Division of Line Segment, Area of Polygon using Coordinate Method,
Review Module 04 - Analytic Geometry Equation of a Line, Distance from a Point to a Line and Between Two Lines, Locus of Points, Conic Section:
Circle, Conic Section: Parabola, Conic Section: Ellipse, Conic Section: Hyperbola, and Polar Coordinates.
4.01 Distance between two points and Division of Line Segment
4.02 Area of Polygon using Coordinate Method
4.03 Equation of a Line
4.04 Distance from a Point to a Line and Between Two Lines
4.05 Locus of Points
4.06 Conic Section: Circle
4.07 Conic Section: Parabola
4.08 Conic Section: Ellipse
4.09 Conic Section: Hyperbola
4.10 Polar Coordinates
Review Module 05 - Plane and Solid General Polygons, Triangles, Quadrilaterals, Circles, Similar Solids, Regular Polyhedrons, Solids with
Geometry constant cross section, and Solids with Similar Cross Section.
5.01 General Polygons
5.02 Triangles (Area, Lines of the triangle)
5.03 Quadrilaterals (General and Cyclic Quadrilateral)
5.04 Circles (Parts and Area, Theorems on Circle)
5.05 Similar Solids
5.06 Regular Polyhedrons
5.07 Solids with constant cross section
5.08 Solids with similar cross section
Review Module 06 - Space Analytic Introduction to Vectors, Vector Addition, Dot Product, Cross Product, Unit Vector and the Direction Cosine,
Geometry and Vectors Basic Mechanics, Work, Moment, Basic Geometry, and Solid Analytic Geometry.
6.01 Introduction to Vector and Operations involving vectors
6.02 Unit Vector and the Direction Cosine
6.03 Application of Vectors to Concurrent Force System
6.04 Application of Vectors to Work and Moment
6.05 Application of Vectors in Geometry.
6.06 Analytic Geometry in Three Dimension
Limits of Functions, Asymptotes, Basic Differentiation, Derivatives of Functions, Implicit Differentiation,
Review Module 07 - Differential
Higher Derivatives, Basic Applications, Maxima-Minima, Time-Related Rates, Parametric Equations, Curvature,
Calculus
Curvilinear Motion, and Partial Derivatives with Application.
7.01 Limits of Functions
7.02 Asymptotes
7.03 Basic Differentiation
7.04 Derivatives of Functions for a Specific Value
7.05 Implicit Differentiation
7.06 Higher Derivatives
7.07 Basic Applications (Motion, Slope of a Curve, Equations of Tangents and Normal Lines to Curves)
7.08 Maxima-Minima
7.09 Time-Related Rates
7.10 Parametric Equations
7.11 Curvature (Radius of Curvature, Center of Curvature)
7.12 Curvilinear Motion
7.13 Partial Derivatives (With Applications)
Indefinite Integrals, Definite Integrals, Plane Areas Bounded by Curves, Volumes of Solids of Revolution,
Review Module 08 - Integral Calculus Length of Curves, Surface Areas of Curves, Centroids, Moment of Inertia, Miscellaneous Volumes of Solids,
Work Problems, and Motion Problems.
8.01 Indefinite Integrals
8.02 Definite Integrals
8.03 Plane Areas Bounded by Curves
8.04 Volumes of Solids of Revolution
8.05 Length of Curves
8.06 Surface Areas of Curves
8.07 Centroids
8.08 Moment of Inertia
8.09 Miscellaneous Volumes of Solids
8.10 Work Problems
8.11 Motion Problems
Review Module 09 - Probability and Statistics of Ungrouped Data, Permutation, Combination, Probability, Conditional Probability, Binomial
Statistics Distribution, Hypergeometric Distribution, Normal Distribution, and Poisson Distribution.
9.01 Statistics of Ungrouped Data
9.02 Basic Principles of Counting
9.03 Basic Principles of Probability
9.04 Conditional and Independent Probability
9.05 Binomial Distribution
9.06 Negative Binomial Distribution
9.07 Geometric Distribution
9.08 Multinomial Distribution
9.09 Hypergeometric Distribution
9.10 Normal Distribution
9.11 Poisson Distribution
Simple Interest, Compund Interest, Ordinary Annuity, Deferred Annuity, Annuity Due, Arithmetic and Geometric
Review Module 10 - Engineering
Gradient, Effective Rate of Interest, Continuous Compound Interest, Perpetuity, Capitalized and Annual Cost,
Economy
Depreciation, Inflation, Benefit-Cost Ratio, Rate of Return, and Break-even Analysis.
10.01 Simple Interest
10.02 Compound Interest and the Cash Flow Diagram
10.03 Annuities
10.04 Gradients
10.05 Effective Rate of Interest and Continuous Compound Interest
10.06 Perpetuity
10.07 Capitalized Cost and Annual Cost
10.08 Depreciation using Straight-Line Method
10.09 Depreciation using Sum of the Years Digits Method
10.10 Depreciation using Declining Balance Method
10.11 Depreciation using Double Declining Balance Method
10.12 Depreciation using Sinking-fund Method
10.13 Inflation
10.14 Break-even Analysis
Tape Corrections, Probable Errors, Weighted Measurements, Differential Leveling, Two-Peg Test, Bubble
Review Module 12 - Elementary and Sensitivity, Effect of Earth's Curvature and Refraction, Compass Surveying, Traverse Surveying: Relative Error
Higher Surveying of Closure, Relative Precision, Traverse Surveying: Area Caclulations, Traverse Surveying, and Stadia
Surveying.
12.01 Tape Corrections
12.02 Probable Errors
12.03 Weighted Measurements
12.04 Differential Leveling
12.05 Two-Peg Test
12.06 Bubble Sensitivity
12.07 Effect of Earth's Curvature and Refraction
12.08 Compass Surveying
12.09 Traverse Surveying: Error of Closure
12.10 Traverse Surveying: Balancing Data
12.11 Traverse Surveying: Area Calculations
12.12 Tacheometry
Review Module 13 - Route Surveying Simple Curve, Compound Curve, Reverse Curve, Transition Curves, Vertical Curves
13.01 Simple Curves
13.02 Compound Curves
13.03 Reverse Curves
13.04 Transition Curves
13.05. Symmetric Parabolic Vertical Curves.
13.06. Unsymmetric Parabolic Vertical Curves.
Review Module 14 - Basic Fundamentals of Traffic Flow, Speed, Density and Flow Relationship, Jam Density and Free flow speed,
Transportation Engineering Queueing Theory, Service rates and Demands on Highways, Peak Hour factor and Accident Analysis
14.01 Fundamentals of Traffic Flow (Time Mean Speed and Space Mean Speed)
14.02 Speed, Density and Flow Relationship
14.03 Jam Density and Free Flow Speed
14.04 Queueing Theory: D/D/1, M/D/1 and M/M/1
14.05 Service Rates and Demand on Highways
14.06 Peak Hour Factor
14.07 Accident Analysis
HYDRAULICS
Fluid Properties, Surface Tension, Capillary Action, Pressure on Droplet or Air Bubble, Viscosity, Manometry
Review Module 15 - Hydraulics 1
and Pascal's Law, Gas Laws, and Compressibility and Bulk Modulus of Elasticity
15.01 Fluid Properties
15.02 Surface Tension
15.03 Viscosity
15.04 Manometry & Pascal's Law
15.05 Gas Laws
15.06 Compressibility and Bulk Modulus of Elasticity
Review Module 17- Hydraulics 3 Relative Equilibrium of Fluids, Fundamentals of Fluid Flow and Fluid Flow Measurement
17.01 Relative Equilibrium of Fliud - Rectilinear Motion
17.02 Relative Equilibrum of Fluids - Rotational Motion
17.03 Fundamentals of Fluid Flow
17.04 Fluid Flow Measurements
Review Module 18 - Hydraulics 4 Weirs, Unsteady Flow, Pipe Flow, Series-Parallel Pipe Systems, and Reservoirs
18.01 Weirs
18.02 Unsteady Flow on Weirs
18.03 Unsteady Flow on Orifices
18.04 Pipe Flow (Closed-Conduit Flow)
18.05 Series and Parallel Pipe Systems
18.06 Reservoirs
Uniform Flow, Froude Number, Most Efficient Sections, Non-Uniform Flow, Hydraulic Jump, and Forces on
Review Module 19 - Hydraulics 5
Vanes.
19.01 Uniform Flow
19.02 Critical Flow
19.03 Froude Number
19.04 Hydraulic Jump
19.05 Most Efficient Sections
19.06 Forces on Vanes
19.07 Forces on Pressurize Pipes
19.08 Water Hammer
GEOTECHNICAL
ENGINEERING
Review Module 20 - Geotechnical
Soil Particle Size Classification, and Weight-Volume Relationship
Engineering 1
20.01 Soil Particle Size Classification
20.02 Weight-Volume Relationship
Review Module 22 - Geotechnical Stresses in Soil, Compressibility of Soil, Primary Consolidation Settlement for Clay, Time Rate of
Engineering 3 Consolidation, Consolidation Settlement under a Foundation, Immediate Settlement & Secondary Settlement.
22.01 Stresses in Soil: Vertical Stress
22.02 Stresses in Soil: Degree of Consolidation
22.03 Stresses in Soil: Time Rate of Consolidation
22.04 Stresses in Soil: Capillary Rise
22.05 Primary Consolidation Settlement
22.06 Consolidation Settlement Under a Foundation
22.07 Immediate Settlement and Secondary Consolidation Settlement
22.08 Total Settlement
Review Module 23 - Geotechnical Darcy's Law, Constant Head Permeabilty Test, Falling Head Permeability Test, Pumping Test in an Unconfined
Engineering 4 Aquifer, Pumping Test in a Confined Aquifer, Seepage, and Flow Nets.
23.01 Darcy's Law
23.02 Laboratory Determination of Hydraulic Conductivity
23.03 Permeability Test in the Field
23.04 Hydraulic Conductivity of Stratified Soils
23.05 Seepage
23.06 Flow Nets
Review Module 30 - Strength of Normal Stress, Shear Stress, Axial Deformation, Strain-Energy, Dynamic-Impact Loading, Poisson's Ratio,
Materials 1 Dilatation, and Shear Deformation.
30.01 Normal and Bearing Stresses
30.02 Shear Stress
30.03 Axial Deformation
30.04 Stress-Strain Curve and Strain Energy
30.05 Dynamic-Impact Loading
30.06 Multi-Axial Strain
Review Module 37 - Steel Design 1 Introduction to Steel Design, Flexural Members (2001), and Biaxial Bending (2001)
37.01 Flexural Members (2001)
37.02 Biaxial Bending (Steel Purlins)
Review Module 38 - Steel Design 2 Theory of Plasticity, Collapse Mechanism, Flexure and Shear (2010/2015)
38.01 Theory of Plasticity
38.02 Collapse Mechanism
38.03 Flexure (2010/2015)
38.04 Shear (2010/2015)