Professional Documents
Culture Documents
Project data
Project name SOLUBLE EVAPORATION
Project number 027
Author RAJESH
Description
Date 5/17/2021
Design code EN
Material
Steel S 355, S 275
1/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
Design
Name CONN40A
Description MOMENT CONNECTION
Analysis Stiffness
Cross-sections
Name Material
3 - IPE240 S 275
4 - HEA180 S 275
Bolts
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
M16 8.8 M16 8.8 16 800.0 201
2/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
Load effects
N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 COL01 HEA180 58.2 62.6 -122.0 0.0 40.0 5.5
Check
Rotational stiffness
Mj,Rd Sj,ini Φc L Sj,R Sj,P
Name Comp. Loads Class.
[kNm] [MNm/rad] [mrad] [m] [MNm/rad] [MNm/rad]
COL01 HEA180 My LE1 57.0 ∞ -7.1 6.00 22.0 0.4 Rigid
Mz LE1 7.8 ∞ -23.6 6.00 8.1 0.2 Rigid
Symbol explanation
Mj,Rd Bending resistance
Sj,ini Initial rotational stiffness
Sj,s Secant rotational stiffness
Φ Rotational deformation
Φc Rotational capacity
Sj,R Limit value - rigid joint
Sj,P Limit value - nominally pinned joint
3/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
Axial stiffness
N Nj,Rd dx St
Name Component Loads
[kN] [kN] [mm] [MN/m]
COL01 HEA180 N LE1 58.2 74.4 0 58200002
4/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
Symbol explanation
Nj,Rd Tension (compression) resistance
St Secant axial stiffness
δ Longitudial deformation
5/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
Bill of material
Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm] [mm] [mm]
Welds
Throat thickness Leg size Length
Type Material
[mm] [mm] [mm]
Double fillet S 275 4.2 6.0 1618.3
Double fillet S 275 5.7 8.0 330.0
Bolts
Grip length
Name Count
[mm]
M16 8.8 30 8
Drawing
EP1
6/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
P20.0x300-180 (S 355)
WID1
P10.0x100-65 (S 355)
7/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
STIFF1
P10.0x220-57 (S 355)
Code settings
Item Value Unit Reference
γM0 1.00 - EN 1993-1-1: 6.1
γM1 1.00 - EN 1993-1-1: 6.1
γM2 1.25 - EN 1993-1-1: 6.1
γM3 1.25 - EN 1993-1-8: 2.2
γC 1.50 - EN 1992-1-1: 2.4.2.4
γInst 1.20 - EN 1992-4: Table 4.1
Joint coefficient βj 0.67 - EN 1993-1-8: 6.2.5
Effective area - influence of mesh size 0.10 -
Friction coefficient - concrete 0.25 - EN 1993-1-8
Friction coefficient in slip-resistance 0.30 - EN 1993-1-8 tab 3.7
Limit plastic strain 0.05 - EN 1993-1-5
Weld stress evaluation Plastic redistribution
Detailing No
Distance between bolts [d] 2.20 - EN 1993-1-8: tab 3.3
Distance between bolts and edge [d] 1.20 - EN 1993-1-8: tab 3.3
Concrete breakout resistance check Both EN 1992-4: 7.2.1.4 and 7.2.2.5
Use calculated αb in bearing check. Yes EN 1993-1-8: tab 3.4
8/9
Project: SOLUBLE EVAPORATION
Project no: 027
Author: RAJESH
9/9