Professional Documents
Culture Documents
1a/1c/2a/2c/5A/10A
power relays
for power supply
JW RELAYS
FEATURES TYPICAL APPLICATIONS
1. Miniature package with universal 1. Home appliances
terminal footprint TV sets, VCR, Microwave ovens
2. High dielectric withstanding for 2. Office machines
transient protection: Photocopiers, Vending machines
10,000 V surge in μs between coil and 3. IIndustrial equipment
contact NC machines, Robots, Temperature
3. Sealed construction controllers
4. Class B coil insulation types
available
5. VDE, TÜV, SEMKO, SEV, FIMKO also
Protective construction: Flux-resistant approved
type/Sealed type 6. Sockets are available
ORDERING INFORMATION
JW N
Contact arrangement
1: 1 Form C
1a: 1 Form A
2: 2 Form C
2a: 2 Form A
Contact capacity
Nil: Standard (5 A)
F: High capacity (10 A)*
Protective construction
S: Sealed type
H: Flux-resistant type
Pick-up voltage
N: 70% of nominal voltage
Coil insulation class
Nil: Class E insulation
B: Class B insulation
Nominal coil voltage
DC5V, DC6V, DC9V, DC12V, DC24V, DC48V
Contact material
F: AgSnO2 type (1a)
Nil: AgNi type (1c, 2a, 2c)
TYPES
1) 1 Form A Standard (5A) type 2) 1 Form A High capacity (10 A) type
Nominal coil Sealed type Flux-resistant type Nominal coil Sealed type Flux-resistant type
voltage Part No. Part No. voltage Part No. Part No.
5V DC JW1aSN-DC5V-F JW1aHN-DC5V-F 5V DC JW1aFSN-DC5V-F JW1aFHN-DC5V-F
6V DC JW1aSN-DC6V-F JW1aHN-DC6V-F 6V DC JW1aFSN-DC6V-F JW1aFHN-DC6V-F
9V DC JW1aSN-DC9V-F JW1aHN-DC9V-F 9V DC JW1aFSN-DC9V-F JW1aFHN-DC9V-F
12V DC JW1aSN-DC12V-F JW1aHN-DC12V-F 12V DC JW1aFSN-DC12V-F JW1aFHN-DC12V-F
24V DC JW1aSN-DC24V-F JW1aHN-DC24V-F 24V DC JW1aFSN-DC24V-F JW1aFHN-DC24V-F
48V DC JW1aSN-DC48V-F JW1aHN-DC48V-F 48V DC JW1aFSN-DC48V-F JW1aFHN-DC48V-F
Standard packing: Carton 100 pcs. Case 500 pcs. Standard packing: Carton 100 pcs. Case 500 pcs.
* Sockets available.
RATING
1.Coil data
• Operating characteristics such as ‘Operate voltage’ and ‘Release voltage’ are influenced by mounting conditions, ambient temperature, etc.
Therefore, please use the relay within ± 5% of rated coil voltage.
• ‘Initial’ means the condition of products at the time of delivery.
Nominal operating
Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating Max. applied voltage
current
voltage (at 20°C 68°F) (at 20°C 68°F) [±10%] (at 20°C 68°F) power (at 20°C 68°F)
[±10%] (at 20°C 68°F)
5V DC 106mA 47Ω 130%V of
6V DC 88mA 68Ω nominal voltage
9V DC 70%V or less of 10%V or more of 58mA 155Ω (at 60°C 140°F)
nominal voltage nominal voltage 530mW
12V DC 44mA 270Ω 120%V of
24V DC (Initial) (Initial) 22mA 1,100Ω nominal voltage
48V DC 11mA 4,400Ω (at 85°C 185°F)*4
Note : The pick-up and drop out voltages rise approximately 0.4% for every 1°C 33.8°F given a standard ambient temperature of 20°C 68°F. Therefore, when using relays
where the ambient temperature is high, please take into consideration the rise in pick-up and drop out voltages and keep the coil applied voltage within the maximum
applied voltage.
3. Electrical life
Condition: Resistive load, at 6 times/min.
Types Switching capacity No. of operations
1 Form A, 1 Form C, 5A 250V AC Min. 1×105
2 Form A, 2 Form C 5A 30V DC Min. 1×105
10A 250V AC Min. 1×105
1 Form A, 1 Form C
10A 30V DC Min. 1×105
REFERENCE DATA
JW 1 Form A Standard (5A) type
1. Maximum operating power 2. Operate/release time 3. Life curve
Sample: JW1aSN-DC12V-F, 10 pcs. 1 Form A Standard (5 A) type
Ambient temperature: 20°C 68°F
100 10
Operate/release time, ms
100
Contact current, A
Operate time
10
Life, ×104
0
10 100 1,000 80 90 100 110 120 5 10 15
Contact voltage, V Coil applied voltage, %V Contact current, A
Operate/release time, ms
Contact current, A
Life, ×104
5 Max.
x- 10
Min.
DC resistive AC resistive
1 load load
Release time Max.
x-
Min.
0 1
10 100 1,000 80 90 100 110 120 0 2 4 6 8 10 12
Contact voltage, V Coil applied voltage, %V Contact current, A
Temperature rise, °C
85°C
50 50
40 40
30 30
20 20
10 10
0 0
100 120 140 160 100 120 140 160
Coil applied voltage, %V Coil applied voltage, %V
13
12
11
Operate/release time, ms
13
Operate/release time, ms
Contact current, A
0
10 100 1,000 80 90 100 110 120
Contact voltage, V Coil applied voltage, %V
Operate/release time, ms
Contact current, A
7 Operate time
AC resistive load (cosϕ = 1.0)
10 6
Max.
5 x-
Min.
4
Release time
1 3 Max.
x-
2 Min.
1
0 0
10 100 1,000 80 90 100 110 120 130
Contact voltage, V Coil applied voltage, %V
DIMENSIONS (mm inch) CAD The CAD data of the products with a “CAD” mark can be downloaded from our Website.
JW 1 Form A
External dimensions Wiring diagram (Bottom view)
CAD N.O. 4
6 COM
20
.787 0.4
.016
1
8 Coil
3.6
2.4 .142
.094 1.1
.043 0.3 0.3 0.5
.012 .012 .020 Note: Terminal numbers are not indicated
on the relay.
3.5
.138
7.6 12.8
Dimension: General tolerance .299 .504
0.9 Less than 1mm .039inch: ±0.1 ±.004 ia.
.035 .5 d ia.
7.6
Min. 1mm .039inch 4-1 059 d 20.0
.299 4-. .787
12.8 less than 3mm .118 inch: ±0.2 ±.008 3.5
.504 .138
Min. 3mm .118 inch: ±0.3 ±.012
Tolerance: ±0.1 ±.004
JW 1 Form A
External dimensions Wiring diagram (Bottom view)
CAD
4 N.O.
COM
2 6 N.C.
20
.787
0.4
.016
1 8 Coil
2.4
.094
3.5 1.1 0.3
.043 0.5
.138 .012 .020 3.6 Note: Terminal numbers are not indicated
0.3 .142
.012 on the relay.
0.5
.020
2.4 16.5
5- -1.5
.094 .650
5
1.3
.051 1.1 0.5
.043 Note: Terminal numbers are not indicated
0.3 .020 3.6
.012 .142 on the relay.
0.3 0.5
5 .012 .020
.197
5
.197 PC board pattern (Bottom view)
28.6 Relay outline
1.128
di .
59 ia
a.
.0 d
15
8- -1.5
.591
8
Dimension: General tolerance 7.5
.295
Less than 1mm .039inch: ±0.1 ±.004
0.8
.031 Min. 1mm .039inch
7.5 15
.295 less than 3mm .118 inch: ±0.2 ±.008 1.3 .591
12.8 Min. 3mm .118 inch: ±0.3 ±.012 .051
.504 5 5
.197 .197
Note: JW 2 Form A is as shown in the diagram above except the N.C. terminals are not present. Tolerance: ±0.1 ±.004
SAFETY STANDARDS
UL/C-UL (Recognized) CSA (Certified)
Types
File No. Contact rating File No. Contact rating Cycles
5A 277V AC 5A 277V AC –
Standard type 1 5A 30V DC 5A 30V DC –
E43028 LR26550
Form A 1/8HP 250V AC 1/8HP 250V AC 105
1/8HP 125V AC 1/8HP 125V AC 105
5A 277V AC 5A 277V AC –
Standard type 1 5A 30V DC 5A 30V DC –
E43028 LR26550
Form C 1/8HP 250V AC 1/8HP 250V AC –
1/8HP 125V AC 1/8HP 125V AC –
5A 277V AC 5A 277V AC –
Standard type 2 5A 30V DC 5A 30V DC 105
E43028 LR26550
Form A 1/8HP 250V AC 1/8HP 250V AC –
1/8HP 125V AC 1/8HP 125V AC –
5A 277V AC 5A 277V AC –
Standard type 2 5A 30V DC 5A 30V DC 105
E43028 LR26550
Form C 1/8HP 250V AC 1/8HP 250V AC –
1/8HP 125V AC 1/8HP 125V AC –
10A 277V AC 10A 277V AC –
High capacity type 10A 30V DC 10A 30V DC –
E43028 LR26550
1 Form A 1/3HP 250V AC 1/3HP 250V AC 105
1/3HP 125V AC 1/3HP 125V AC 105
10A 277V AC 10A 277V AC 3×104
High capacity type 10A 30V DC 10A 30V DC 3×104
E43028 LR26550
1 Form C 1/3HP 250V AC 1/3HP 250V AC 3×104
1/3HP 125V AC 1/3HP 125V AC 3×104
NOTES
1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”.
TYPES
Number of Applicable relay type Standard packing
Product name Part No.
poles 1 Form A 1 Form C 2 Form A 2 Form C Inner carton Outer case
JW1 PC board socket 1 JW1-PS ● ●
10 pcs. 100 pcs.
JW2 PC board socket 2 JW2-PS ● ●
SPECIFICATIONS
Type PC board socket
Item 1 pole 2 poles
Breakdown voltage 1,500 Vrms for 1 minute
Insulation resistance Min. 100 MΩ
DIMENSIONS (mm inch) CAD The CAD data of the products with a “CAD” mark can be downloaded from our Website.
PC board socket
External dimensions PC board pattern (Bottom view)
CAD 1 Form A
0.8±0.1
.031±.004 1 Form C
13±0.6
.512±.024 8-1.3 dia.
8-.051 dia.
32±0.6
1.260±.024
7.5
.295
(4) 15 5 5
21.5±0.6 (.157) .591 .197 .197
.846±.024
6.7±0.3
.264±.012 0.3±0.1
4±0.6 .012±.004
.157±.024
0.35±0.1 5-1.3 dia.
Pre-soldering .014±.004 5-.051 dia.
7.6
.299
For cautions for use, please read “GUIDELINES FOR RELAY USAGE”.
https://industrial.panasonic.com/ac/e/control/relay/cautions_use/index.jsp
Ambient Environment
Usage, Transport, and Storage Conditions Dew condensation
During usage, storage, or transportation, avoid locations Condensation occurs when the ambient temperature drops
subjected to direct sunlight and maintain normal temperature, suddenly from a high temperature and humidity, or the relay is
humidity and pressure conditions. suddenly transferred from a low ambient temperature to a high
Temperature/Humidity/Pressure temperature and humidity. Condensation causes the failures like
When transporting or storing relays while they are tube insulation deterioration, wire disconnection and rust etc.
packaged, there are cases the temperature may differ from the Panasonic Corporation does not guarantee the failures caused
allowable range. In this case be sure to check the individual by condensation.
specifications. Also allowable humidity level is influenced by The heat conduction by the equipment may accelerate the
temperature, please check charts shown below and use relays cooling of device itself, and the condensation may occur.
within mentioned conditions. (Allowable temperature values Please conduct product evaluations in the worst condition of
differ for each relays, please refer to the relay's individual the actual usage. (Special attention should be paid when high
specifications.) temperature heating parts are close to the device. Also please
consider the condensation may occur inside of the device.)
Icing
1) Temperature:
The tolerance temperature range differs for each relays, Condensation or other moisture may freeze on relays when the
please refer to the relay’s individual specifications temperature become lower than 0°C.This icing causes the sticking of
2) Humidity: movable portion, the operation delay and the contact conduction failure
5 to 85 % RH etc. Panasonic Corporation does not guarantee the failures caused by
3) Pressure: the icing.
86 to 106 kPa
The heat conduction by the equipment may accelerate the cooling of
relay itself and the icing may occur. Please conduct product
Humidity, %R.H.
evaluations in the worst condition of the actual usage.
Low temperature and low humidity
85
The plastic becomes brittle if the switch is exposed to a low
Allowable range
temperature, low humidity environment for long periods of time.
(Avoid
(Avoid icing
condensation High temperature and high humidity
when used at
temperatures when used at Storage for extended periods of time (including transportation periods)
temperatures
lower than 0°C) higher than at high temperature or high humidity levels or in atmospheres with
0°C)
5 organic gases or sulfide gases may cause a sulfide film or oxide film to
–40 0 85 form on the surfaces of the contacts and/or it may interfere with the
Ambient temperature, °
C
functions. Check out the atmosphere in which the units are to be
stored and transported.
Others
Cleaning
1) Although the environmentally sealed type relay (plastic sealed type,
etc.) can be cleaned, avoid immersing the relay into cold liquid (such
as cleaning solvent) immediately after soldering. Doing so may
deteriorate the sealing performance.
2) Cleaning with the boiling method is recommended(The temperature
of cleaning liquid should be 40°C or lower ).
Avoid ultrasonic cleaning on relays. Use of ultrasonic cleaning may
cause breaks in the coil or slight sticking of the contacts due to
ultrasonic energy.
ASCTB190E-1 201903