Professional Documents
Culture Documents
Technical Document
Document Name:
Operation Instruction for Sales DL_MC801A_STC_SAV1.00.02
Version:A
Total 5 Pages
<以上所有信息均为中兴通讯股份有限公司所有,不得外传> 1
All Rights reserved, No Spreading abroad without Permission of ZTE
Confidential▲
Contents
1.Objective.......................................................................................................................................3
2.Operation Instruction.......................................................................................................................3
2.1 Computer settings.................................................................................................................3
2.2 Start Update...........................................................................................................................3
2.3 website...................................................................................................................................5
3.Notes.................................................................................................................................................6
<以上所有信息均为中兴通讯股份有限公司所有,不得外传> 2
All Rights reserved, No Spreading abroad without Permission of ZTE
Confidential▲
General Introduction
The Tool is the software which only be run in PC with Windows®7, Windows®8, Windows®10.
In some operating systems, you need to right click and run the tool as administrator.
The Software Update Tool is for clients update the firmware and software of device. Before you
use the update tool, you should do the following things:
1.Make sure only one device is connected to PC.
2.Use the USB Type-C interface and network cable interface to connect the computer.
3.Use the power adapter to supply power to the device.
Install Drivers:
If your computer does not support the driver of this device (MC801A), please install the driver
attached to the tool package.
1. Start the computer and connect the device with the computer correctly.
2. Run the tool (DL_MC801A_STC_SAV1.00.02.exe). The tool can get the software version
automatically. The Main interface of the Update tool is shown below:
<以上所有信息均为中兴通讯股份有限公司所有,不得外传> 3
All Rights reserved, No Spreading abroad without Permission of ZTE
Confidential▲
After the upgrade is completed, the following prompt will pop up.
<以上所有信息均为中兴通讯股份有限公司所有,不得外传> 4
All Rights reserved, No Spreading abroad without Permission of ZTE
Confidential▲
After each upgrade, close the tool and restart the MC801A.
3.Notes
<以上所有信息均为中兴通讯股份有限公司所有,不得外传> 5
All Rights reserved, No Spreading abroad without Permission of ZTE
Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传> 6
All Rights reserved, No Spreading abroad without Permission of ZTE