Professional Documents
Culture Documents
1/2
Sec
Sec 2 Maintenance
2-1 Sensor Light Receptor and Projector Cleaning
If an upper yarn detection miss Eb alarm occurs, use
one of the following methods to clean any dirt which
has built up on the light receptor and projector.
Receptor and
projector
- If the light receptor and projector are scratched, they may not operate properly. Therefore,
do not use any hard or sharp objects, etc., when cleaning.
- Do not use any petroleum solvents (such as Zippo oil).
2/3
Sec
- If the detection window is damaged, it may not operate properly. Therefore, do not use any
hard or sharp objects, etc., when cleaning.
- Do not use any petroleum solvents (such as Zippo oil).
Sec 3 Consumables
If the dirt cannot be removed even after cleaning the detection window and the upper yarn can still not be
detected, please replace with a new part.
* When removing, completely open the detection window, and remove in the circumferential direction to
ensure the hinge does not catch on anything.
Detection
window
If excessive force is used to remove the window, the hinge may be damaged.