Professional Documents
Culture Documents
Probe Quick Guide v2 231013 1753 en
Probe Quick Guide v2 231013 1753 en
The life of probe may last longer if you remove the gel and cover immediately after using the
probe as it prevents lens protrusion and case discoloration.
▷ Keep using the probe cover without ② Probe case discoloration occurs ▷ Remove the probe cover
changing it every time after use Cause: remaining gel may cause immediately after use to store
discoloration of the probe case
Page 1 Samsung Confidential
Follow the recommended use of the probe.
The life of probe may last longer if you remove the gel by using soft tissues as it prevents
lens protrusion and wear.
Iodine
① Lens protrusion occurs
① Use incompatible disinfectant ▷ Use compatible disinfectant
Cause: incompatible disinfectant infiltrates the probe
●●min ↓
●●min ↑
24℃ 40%
③ Bend the strain ④ Pull cables to clean ② Damage and break of the
relief to use strain relief ▷ Do not bend the ▷ Clean the cable
▷ Improper storage of probe and use of Cause: impact and excessive force to strain relief too much smoothly
incompatible disinfectant the cables and strain relief
x67
x133
x265
x67 - side
Fiber thickness
Thick (16 um) Thick (30 um) Thick (18 um) Thick (16 um) Thick (16 um) Thin (3 um) Thick (18 um) Thick (18 um) Thick (17 um)
Fabric density 3
(1: highest, Ground cherry-shape
4: lowest) fabric tissue: 240 um)
Stomata pattern
※ Fabric tissue thickness is the major factor to determine the roughness of wipes and the second major
Page 6factor is fabric density that makes the difference in roughness. Samsung Confidential