Professional Documents
Culture Documents
RM1,000!
Join our photo contest now!
*T&C Apply More info: suzuka.com.my/promotion
I N T E R I O R F L O O R I N G T E X T U R E P A I N T
WA L L F I N I S H
PROFESSIONALS
TAIWAN • M A L AYS I A • THA I L A ND
suzuka.com.my EDITION
suzuka.group Hotline : +6012 359 5677
* Photos of the products shown in this catalogue may vary in color due to lighting
MANAGEMENT
SYSTEMS
012
01
condition & printing. We suggest you examine actual product samples before ordering. KRETERRA-E01-2112
Low VOC & Odor
Easy Maintenance
Easy to Touch Up
Due to the popular demand of cement render texture, we bring you – Kreterra.
Kreterra is a cement effect floor coating which can bring you the industrial and minimalistic effect
without the problem of cracking and chipping off – usually caused by normal cement render.
01 02
Shark Grey | KRT-703
All color shown are as close to the actual SUZUKA® Kreterra colors as modern printing techniques permit.
03 Color appearance/finishing may vary according to amount of coats, style of strokes applied and individual painting methods. 04
K RT-705 IRO N GRE Y
All color shown are as close to the actual SUZUKA® Kreterra colors as modern printing techniques permit.
05 Color appearance/finishing may vary according to amount of coats, style of strokes applied and individual painting methods. 06
Shadow Grey | KRT-708
All color shown are as close to the actual SUZUKA® Kreterra colors as modern printing techniques permit.
07 Color appearance/finishing may vary according to amount of coats, style of strokes applied and individual painting methods. 08
APPLICATION TECHNIQUES
SUBSTRATE REQUIREMENT & PREPARATION:
Substrate concrete or screed should be a minimum of compressive strength 25N/mm2 and adhesive pull-off strength of minimum 1.5N/mm2 (concrete failure).
- Concrete substrates must be prepared mechanically using - Rough contaminations and high spots can be removed by grinding.
abrasive blast cleaning or scarifying equipment to remove - The substrate should be clean and free from laitance, oil, dust, paint residues, algae, loose
cement laitance and achieve an open textured surface. and friable material must be completely removed from all surfaces before application of the
- Crack and hollows should be properly remedied. product.
Spread the mixed MB with flat/notch trowel to the required thickness. Immediately after, use the spike
roller to remove entrapped air and to ensure the uniform thickness.
COATING SYSTEM
STEP 3 : SANDING STEP 4 : PRIMER STEP 5 : TEXTURE COAT
Material Packing Number Coating Consumption Tools
(Weight Ratio) of Coats Interval (Hrs) After the surface dried for 24 hours, sand the Roll a layer of primer on the entire surface. Scrape a layer of texture coat randomly on the
surface with sandpaper (7 grit) to ensure a smooth Let it dry for at least 1 hour. entire surface. Let dry for 40 minutes.
1
surface. Remove the dust & the dirt from the
Moisture Barrier Part A : 3.5 kg 1 24 2 kg/m2 (1 mm) Trowel,
surface. A second layer of texture coat may be applied to
enhance the texture effects.
EP-MB Part B : 1.5 kg Hours Paint Roller
Self Smoothening Epoxy Part C : 19 kg & Spike Roller
Cementitious Moisture Barrier
2 Primer
KRP - Kreterra Primer
1L 1 4
Hours
7 – 9 m2/ltr Roller
3 Texture Coat
KRT - Kreterra Texture
1L 1–2 2
Hours
5 – 6 m2/ltr Trowel
STEP 6 : SANDING
After the surface dried, sand the surface with
sandpaper (7 grit) to ensure a smooth surface.
STEP 7 : TOPCOAT
Mix Part A & Part B of topcoat. Roll a layer of
topcoat on the entire surface. Use a dry and clean
APPLICATION VIDEO
4
Remove the dust & the dirt from the surface. roller to absorb the excess topcoat.
Topcoat 5 KG (4 : 1) 1–2 14 0.13 kg/m2 Spray &
Let it fully dry for 14 hours.
WPU-G (GLOSS)
Water based PU Topcoat Part A : 4 kg Hours @ 50μ Roller TOOLS :
Part B : 1 kg
09 10