Professional Documents
Culture Documents
Permanent Link
Ideal: LANTEK 6
LANTEK Twisted Part # 0012-
LANTEK 6A 1. Consult Ideal's web site for the latest Firmware and Software Version.
Firmware: V2.510 or Reporter Panduit Patch Pair 00-0629
LANTEK 7 N/A 2. Tester must be recalibrated from job site to job site.
later V3.270 or Cord UTPSP* Perm: Cat Cat6/5e
LANTEK 7G 3. Patch cords should be in optimal condition.
later 6-250 adapter RJ45
Ideal Industries Website
Channel
Ideal: LANTEK 6
LANTEK Twisted Part # 0012-
LANTEK 6A Panduit 1.Consult Ideal's web site for the latest Firmware and Software Version.
Firmware: V2.510 or Reporter Pair 00-0629
LANTEK 7 Patch Cord N/A 2. Tester must be recalibrated from job site to job site.
later V3.270 or Channel: Cat6/5e
LANTEK 7G UTPSP* 3. Patch cords should be in optimal condition.
later Cat 6-250 adapter RJ45
Ideal Industries Website
Part # 6331-
Megger TIA Cat 6 827 1. Consult Megger web site for the latest Firmware and Software
Megger: SCT2000 Version 1.0.0 - N/A
LCMD Channel Category 6 Version.
Channel
Adapter
* Panduit has not physically tested the FrameScope 350. Agilent maintains the FrameScope and WireScope have identical software and hardware for cabling testing.
Approved Test Leads For Panduit Mini-Com® TX6™
PLUS Jack Modules and DP6™ PLUS Patch Panels
Approved: PANDUIT independently verifies field testers report values consistent with a Laboratory Network Analyzer for adherence to the standards. The following testers are fully approved:
Permanent Link
Channel
Linkware
Software Part # 8262-42
Fluke: Networks V6.0 or Category 1. IMPORTANT: Make sure Channel adapters are used with Channel
TIA Cat 6
OMNIScanner 2 Version 6.12 or later later - 5/5e/6 N/A Autotests.
Chan1
Fluke Networks Website (Windows 7 Channel 2. Testing Channel on drops less than 20m is NOT RECOMMENDED.
patch if Adapter2
applicable)
4/8/10