The document is a mid-semester examination for a Data Communication and Computer Networks course. It contains 20 multiple choice questions testing students' knowledge of key concepts in data communication and computer networking, including data sequencing, data routing, flow control, error detection, noise interference, computer networks, local area networks, the Internet, intranets, network interface cards, repeaters, hubs, switches, carrier sense multiple access, peer-to-peer architecture, client-server architecture, multiplexing, and frequency division multiplexing.
The document is a mid-semester examination for a Data Communication and Computer Networks course. It contains 20 multiple choice questions testing students' knowledge of key concepts in data communication and computer networking, including data sequencing, data routing, flow control, error detection, noise interference, computer networks, local area networks, the Internet, intranets, network interface cards, repeaters, hubs, switches, carrier sense multiple access, peer-to-peer architecture, client-server architecture, multiplexing, and frequency division multiplexing.
The document is a mid-semester examination for a Data Communication and Computer Networks course. It contains 20 multiple choice questions testing students' knowledge of key concepts in data communication and computer networking, including data sequencing, data routing, flow control, error detection, noise interference, computer networks, local area networks, the Internet, intranets, network interface cards, repeaters, hubs, switches, carrier sense multiple access, peer-to-peer architecture, client-server architecture, multiplexing, and frequency division multiplexing.
DEPARTMENT OF INFORMATION SYSTEMS AND TECHNOLOGY MID SEMESTER EXAMINATION CSC 333: DATA COMMUNICATION AND COMPUTER NETWORKS TIME
Instructions: Answer ALL
STUDENT ID…………FMS/0293/18…………………………………lvl 400……. 1. The process where a long message to be transmitted is broken into smaller packets of fixed size for error free data transmission is referred to as ……………DATA SEQUENCING…………… 2. The process of finding the most efficient route between source and destination before sending the data is known as ………DATA ROUTING……………………………………… 3. The process of regulating the transmission of data between fast sender and slow receiver is known as …FLOW CONTROL……………. 4. The process of ensuring that data are transmitted without any error is referred to as ………ERROR FREE………….. 5. When signals at different frequencies share the same transmission medium, the result may be …………………INTER MODULATION…………. 6. The agitation of electrons in a conductor will result to ……THERMAL NOISE………………….. 7. …………COMPUTER NETWORK………… is a group of computers and devices interconnected by communications channels that facilitate communications among users and allows users to share resources. 8. …………………LOCAL AREA NETWORK…..is a network that connects computers and devices in a limited geographical area. 9. A global system of interconnected governmental, academic, corporate, public, and private computer networks is referred to as ……………INTERNET…………………………. 10. ………INTRANET……………is a set of networks, using the Internet Protocol and IP- based tools such as web browsers and file transfer applications that are under the control of a single administrative entity. 11. …………NETWORK INTERFACE CARD…………is a piece of computer hardware designed to allow computers to communicate over a computer network. 12. A REPEATER…………………. is an electronic device that receives a signal, cleans it of unnecessary noise, regenerates it, and retransmits it at a higher power level, or to the other side of an obstruction, so that the signal can cover longer distances without degradation 13. Which network component copies a data packet unmodified to all its ports …… HUB………… 14. …………SWTICHES……… is a device that provides a central connection point for cables from workstations, servers, and peripherals and do not broadcast network packets. 15. …………CARRIER SENSE MULTIPLE…………. is a contention-based protocols where every node in the network transmit whilst listening to the medium 16. The type of network in which each workstation has equivalent capabilities and responsibilities is known as …PEER TO PEER ARCHITECTURE……………………………………. 17. The network architecture in which each computer or process on the network is either a client or a server is referred to as ……CLIENT/SERVER………………………. 18. ………………MULTIPLEXING…………is the technique of transmitting multiple signals over a single medium 19. The assignment of non-overlapping frequency ranges to each “user” of a medium is referred as ……………FREQUENCY DIVISION MULTIPLEXING…………… 20. ………………ATTENUATION…………..is the lost of signal strength as it travels from one point to the other.