Professional Documents
Culture Documents
Question 61
Correct
Calculate the reserve factor for a power plant with a load factor of 0.7 average load of 50 MW and rated capacity of 80 MW
a. 1.5
b. 1.12
c. 2
d. 1.6
Question 62
Correct
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=83122&cmid=23328&page=6 1/4
12/20/2020 board exam: Attempt review (page 7 of 10)
Question 63
Incorrect
What is the resulting pressure when 1 kilogram of air at 105kPaa and 94 degrees C is heated at constant volume to 425 degrees C.?
a. 169.7 kPaa
b. 179.7 kPaa
c. 189.7 kPaa
d. 199.7 kPaa
Question 64
Correct
In automotive applications, the starting motor typically draws _______of amps of currents as it labours to start up the engine.
a. Hundreds
b. Hundred Thousands
c. Thousands
d. Millions
Question 65
Correct
b. speed
c. temperature
d. volume of cylinder
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=83122&cmid=23328&page=6 2/4
12/20/2020 board exam: Attempt review (page 7 of 10)
Question 66
Correct
Air at 1 MPa, 25ºC is contained in a piston-cylinder device that is arranged to maintain a constant pressure. How much heat in kJ/kg is
required to raise the temperature of this air to 425ºC?
a. 450.9
b. 402.5
c. 990.5
d. 234.5
Question 67
Incorrect
Large-bulb alcohol thermometer used to measure air speed or atmospheric condition by means of cooling.
a. Kelvin Thermometer
b. JJ Thompson Thermometer
c. Kata thermometer
Question 68
Incorrect
Air at atmospheric pressure of 760 mm Hg at sea level with a temperature of 22 deg K, what is the specific weight in kN per cu. meter?
a. 0.516
b. 0.651
c. 0.371
d. 0.157
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=83122&cmid=23328&page=6 3/4
12/20/2020 board exam: Attempt review (page 7 of 10)
Question 69
Correct
b. The valve of the controlled condition actually maintained under steady state conditions
c. being manipulated
e. The value set on the scale of the control system in order to obtain the required condition
The correct answer is: The valve of the controlled condition actually maintained under steady state conditions
Question 70
Incorrect
How do you call the mixtures or substances that are used in laboratory methods of producing a drop in temperature? The most common
example is the mixture of ice and salt.
a. Frigorific mixture
b. Calorific mixture
c. Hygroscopic mixture
d. Water-ammonia mixture
◄ Assignment 8
Jump to...
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=83122&cmid=23328&page=6 4/4