Professional Documents
Culture Documents
NOTE 1: The JEDEC type numbers shown above have a Zener voltage tolerance of + 5% of the nominal Zener voltage.
Vz is measured with the device junction in thermal equilibrium at an ambient temperature of 25°C + 3°C.
A “C” suffix denotes a + 2% tolerance and a “D” suffix denotes a + 1% tolerance.
1
Revision Date: 4/16/2012
New Product
1N4099 thru 1N4135,
1N4099-1 thru 1N4135-1
Outline Drawing
LEADED DESIGN DATA
0.080 MAX
2.03 DIA CASE: Hermetically sealed glass case, DO – 35
1.000
MIN
25.400 LEAD MATERIAL: Copper clad steel
LEAD FINISH: Tin / Lead
POLARITY 0.175
BAND 4.44
MAX THERMAL RESISTANCE: (RθJEC): 250˚C/W maximum at L = .375 in
(CATHODE)
1.000
MIN
THERMAL IMPEDANCE: (ZθJX): 25˚C/W maximum
25.400
0.018 / 0.022
DIA
0.457 / 0.559 POLARITY: Diode to be operated with the banded (cathode) end positive
MOUNTING POSITION: Any
All dimensions in INCH
mm
Graphs
1000
400
500
200
100
ZENER IMPEDANCE ZZT (OHMS)
100
50
40
30
5
4
3
1
.1 .2 .5 1 2 5 10 20 50 100
OPERATING CURRENT IZT (mA)
www.aeroflex.com/metelics metelics-sales@aeroflex.com
Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services
herein at any time without notice. Consult Aeroflex or an authorized sales representative to
verify that the information in this data sheet is current before using this product. Aeroflex
does not assume any responsibility or liability arising out of the application or use of any
product or service described herein, except as expressly agreed to in writing by Aeroflex;
nor does the purchase, lease, or use of a product or service from Aeroflex convey a license Our passion for performance is defined by three
under any patent rights, copyrights, trademark rights, or any other of the intellectual rights attributes represented by these three icons:
of Aeroflex or of third parties. solution-minded, performance-driven and customer-focused.