Professional Documents
Culture Documents
ميكانيك الموائع
Arabic–English Bilingual Text - كتاب ثنائي اللغة
Second Edition الطبعة الثانية
2019
M. Taki Al-Kamil
محمد تقي الكامل
Second Edition الطبعة الثانية
)اقدم هذا الكتاب الى طالب الهندسة في العالم العربي (تحميل مجاني
This book is offered as free download to engineering students in the Arab world
Acknowledgments
I would like to express my thanks and appreciation to:
Dr Noor M.Taki Al Kamil, for typing the original Arabic text
Maria Piotrowska and Grainne Middleton, for taking care of the proof writing of the English text
ال يجوز استنساخ أي جزء من هذا النص أو تخزينه في نظام استترجا أو نقلته بتيي,وضع هذا الكتاب لتشجيع وتطوير التعلم ثنائي اللغة
وسيلة إلكترونية اوميكانيكية او تصويره لالغراض التجارية دون الحصول على إذن مكتوب من المؤلف الدكتورمحمد تقي الكامل
This book is intended for education use and to promote bilingual learning. No part of this text may be
reproduced, stored in a retrieval system, transmitted in any form, electronic, mechanical, photocopying,
recording, scanning for commercial purposes, without a written permission of the Author Dr M.Taki Al
Kamil
الدكتور محمد تقي داود الكامل
حصل على شهادة البكالوريوس -شرف في الهددةيا الكياياةييا ايم ةااييا لييد الاالكيا الاححيدة عيا 3791وحصيل عليى
شهادة الدكحوراه ف اوضيو اششييا الحيرارن ايم دليس الةااييا عيا .3791عايل في اؤةةيا اليدل والايا لااييا عيا
3793ث ادحقل الى كليا الهددةا في ةااييا البصيرة بدرةيا ايدرس ,وبييد حرييحيا اليى اةيحا اةياعد (اةيحا اشيار شيال
ادصب رةيس ية الهددةا الكياياةيا ف اللحرة .3779-3773الححق بةاايا اشاارا اليربيا الاححدة كاةحا اةر لادة ةيحا
شهور ث ادض الى كليا الحقدييا اليلييا في ابيو ببي عيا ,3779وفي عيا 3001اصيب رةيةيل لقةيا الهددةيا الكياياةييا
والايكاديكيا .ادحقل الى ايهد ابو بب للحيلي والحدريب الاهدي عيا ,3009وبييد اضي ثيسن ةيدوا في اليايل اشكياديا
اصب اديرأ (عايدأ لايهد الريف لساداد والحكدولوةيا الح بيقيا.
About the Author
Full Name: Mohamed Taki Dawood Salman Al-Kamil
t picture
1977 Construction engineer & Acting Resident Engineer in South LPG project – Basrah
2003 - Dec. 2008 Chair of Chemical Eng, Mechanical Eng and Engineering Management Depts.-
Dec 2008 - Feb. 2011 Head, Academic Services– Vocational Education and Training Institutes in Abu
Feb 2011- June 2011 Acting Director of Al Jazirah Institute of Science and Technology – ADVETI
June 2011- Nov.2016 Director of Al Reef Institute of Logistics and Applied Technology- ADVETI
ii
بسم هللا الرحمن الرحيم
Preface تقديم
This book is intended for undergraduate ىضععع هعععال لاب ععع لبيععع ام طلبععع منععع هل لاسال ععع
engineering students in Universities, Technical لالىايع ععج لاا مو ع ىلابليع لا منيع ىلامو هععس لا ني ع
Colleges and Institutes. It has been written using a ىقععععس لع مععععس لامكاععععا ب بععععن لالىل وميب نيعععع لامىل عععع
new format and is based on the previous book Fluid ىلاعععسق الو الععععسلس لاعععن ب عععلى اسيعععس طبععع لاب ععع
and Particle Mechanics, which was written in Arabic ا غطيعع م عععاسل مععنول لاونس ععع1986 لالىل ععج عععع
ىنظعال ابرعاة لالاطع, لابيمي ي ام سة ميب ني لامىل
and is now out of print. The original textbook,
لامطبويعععع يععععن ىن عععع ا طبوععععن لق ضعععع لالمععععا مالاوعععع
which was aimed at chemical engineering
نصىصن ى حسيرو
undergraduate students studying fluid mechanics,
was developed in 1986. However it was poorly
printed with many errors and so needed to be
revised and updated.
This revised edition is written in both Arabic and عععج هعععال لاطبوععع لامنمحععع ب الغععع لاوابيععع ب ععع لاعععن
English as a bilingual text. This innovative format ىبوال لال على لامب بعا ي ع طي,ىلالنبليزي ج آن موأ
should help students to understand the engineering و ع ى ا ععيم لامب ع س لاونس ععي اول ع ميب ن ع لام ع ا
principles of fluid mechanics, particularly those لامىل ععععع ىا صععععع لىال ععععع لاطلبععععع لاضعععععوي ين ب الغععععع
with weak English language skills. This format is لالنبليزيععع ى و معععس لاطايمععع لااسيعععسة علععع مبعععس عععا
ىقععس ان ع, لام ع هي لاولمي ع ب ع الغ ين ععج ال لاص ع ح
based on explaining the concepts of fluid
لامكاا لا اام لاحا ي لا ج عكس لحي نعأ لاع ضعليل
mechanics in both languages on the same page,
ى اععسا لال عع اة لاعع لن لامكاععا صععم هععال لامعع ا
avoiding literal translation so as not to mislead the
. لاب ىلناز طبون سىن لالاى لا لامط ب
reader. This book was designed and typed by the
author himself.
A new bilingual format with Arabic and ن مب ى ب الغ ين لاوابي ىلالنبليزي عج
English languages displayed on the same ن س لاص ح
page
An innovative learning method avoiding طايم اسيسة ال ول سىن لالاى لا لا اام
literal translation لاحا ي
A suitable language level for students ل عععلى اغعععى مابعععز ىمب عععط يال ععع طلبععع
across the Middle East لاو ا لاوابج
م ع اين مض ع لا ع لالمرل ع ا ععاي لاطلب ع
Exercises added to the examples which will
علي عل لا ول ج بي
engage the students in an interactive
learning environment
The use of technology being encouraged ل اسل بان مل لالب ل احعل بوعا لام ع ل
as students asked to use Excel to solve ا ععععاي لاطلبعععع علعععع ل عععع اسل بنىاىايعععع
some of the problems لامولىم
An introduction to short research projects م ع اي بحري ع ام ع عسة لاطلب ع عل ع لنا ع ز
to help the learners with their م مل سىن لالاى لا لالااين سال
independent studies
ا ىم ى ىضيح حسير
Updated drawings and illustrations
وا عععع ا ىايععععن لامعععع ا لاعععع لاصعععع ح
A detailed index to guide the reader to the
لامطلىب
required page
iii
There are 11 chapters including flow بمع يوع لااايع ن اععالل,يضع لاب ع لحععس ع ععا صععال
through packed beds and particle لالى ععع ط لام ععع مي ىميب نيععع لاعععسق ال ىقعععس لع معععس نظععع
mechanics. The text is written in SI units; it لاىحععسل لاو ع امج ععج لا صععىل ب ع ىلا ععج ال ع لام ع ى
is suitable for chemical, mechanical and civil لاولمعععج اسلا عععج لاونس ععع لابيمي يععع ىلاونس ععع لاميب نيبيععع
engineering students. Whilst most of the ىلاونس لامسني ابز صىل لاب ع علع عا لامبع س
chapters focus on explaining the basic بينمع, لال ي ىعل لان حي لا طبيمي اول ميب ني لامىل
ي نععع ىل لا صعععل لالايعععا مىلضعععي عععبل معععساال الم ععع هي
concepts and practical aspects of fluid
لام مسم مرل حلعيال لاطبمع لام امع ىظع هاة لضعطال
mechanics, chapter 11 is intended for a
لامىل
slightly higher level, as it covers boundary
layer and turbulence analysis.
The text was a written in this format by the لناععز هععال لاب ع بلغ ععين باوععس ععاس اععال قععس ياععس لام ع ا
author and there may well be some ىيصعو حعاا لى عمىل, بوا لا ب ين ج لاطب ىلاا ع
irregularities and inconsistencies. It is not لال لنععععن يمبععععن صععععحي لالاطعععع, لاعععع لاععععن لضعععع
possible to add or remove some parts of . لامطبوي ج لان لى لامو سال ب وىا
the text because this will upset the text set
up; however, any typing errors in the text
or equations can easily be rectified.
iv
CONTENTS PAGE الصفحة المحتويات
1.1 Introduction
1.2 Dimensions 2 المقدمة1.1
1.3 Empirical equations 4 األبعاد1.2
1.4 Systems of units 6 المعادالت التجريبية1.1
1.4.1 CGS system 7 أنظمة الوحدات1.4
1.4.2 International System of Units 7 ) غرام – ثانية- نظام (سنتيمتر1.4.1
1.4.3 Foot-Pound-Second system 7 النظام العالمي للوحدات1.4.2
1.4.4 The Engineering System 9 ) ثانية- باوند- نظام (قدم1.4.1
1.5 Thermal Units 9 النظام الهندسي للوحدات1.4.4
1.6 Molar units 11 الوحدات الحرارية1.1
1.7 Units of derived quantities 11 الوحدات المولية1.6
1.8 Conversion of Units 11 وحدات الكميات المشتقة1.7
1.9 Dimensional Analysis 11 تحويل الوحدات من نظام إلى آخر1.1
1.10 Symbols 14 التحليل البعدي1.9
1.11 Problems 22 لرموز1.11
21 المسائل1.11
v
CONTENTS PAGE الصفحة المحتويات
vi
CONTENTS الصفحة PAGE المحتويات
vii
CONTENTS PAGE الصفحة المحتويات
viii
CONTENTS PAGE الصفحة المحتويات
ix
CONTENTS PAGE الصفحة المحتويات
x
CONTENTS PAGE الصفحة المحتويات
xi
CONTENTS PAGE الصفحة المحتويات
11. DIFFERENTIAL EQUATIONS & THE BOUNDARY LAYER المعادالت التفاضلية و الطبقة المتاخمة.11
xii
UNITS & DIMENSIONS 1 الوحدات واالبعاد
After completing this chapter you should be able to: بعد االنتهاء من دراسة هذا الفصل ستتمكن من:
1. Determine the units and dimensions of .1تحديد الوحدات واالبعاد للكميات الفيزيائية المشتقة
derived physical quantities .2تحويل الوحدات من نظام الى اخر
2. Convert units from one system to another .3اشتتتتتقاا معادلتتتتة تتتتتربا المتةيتتتترات النات تتتتة تتتتن
3. Derive a relationship using dimensional الت ارب المختبرية باستخدام التحليل البعدي
analysis
1
UNITS & DIMENSIONS 1 الوحدات واالبعاد
It is common that quantities and physical تقاس الكميات و الخواص الفيزيائية بوحدات معروفة ومتداولة
properties are measured by some units, for , فمتتت يستتتتخدم الكيلتتتومرام او الباونتتتد لتحديتتتد مقتتتدار التتتوزن
example the kilogram and pound are used to وكذلك تقاس المسافة بوحتدات الكيلتومتر واحيانتا الميتل اوالمتتر
estimate weight. Distance is measured by فلماذا يستخدم الكيلومرام في بعض المنتااا بينمتا. او اليارده
kilometer or mile and sometimes by meter or يستخدم الباوند في اخرى ؟ وما الفرا بين المتر واليارده ؟ وكم
yard and so on. Why do we use the kilogram in كيلومتر من االميال ؟11 يعادل مسافة
some locations and the pound in another?
What is the difference between the meter and
the yard? How many miles equal 10 kilometers?
The above questions indicate the existence of تشيرالتساؤالت حول تسمية الوحدات وتنو ها الى و ود انظمة
different systems for units. Each system will مختلفتتتة ت متتتي فتتتي ايهتتتا وحتتتدات ليتتتاس للكميتتتات وللختتتواص
include the units, of quantities and physical فتالكيلومرام, وكذلك توفر اللتات تتربا متا بينهتا,الفيزيائية
properties, and specify how the units are ( وانSI) والمتتتتر متتت ال ينتميتتتان التتتى النظتتتام التتتدولي للوحتتتدات
related. For example, the kilometer and the وان الباونتتد واليتتارد ينتميتتان, متتتر1111 الكيلتتومتر يستتاوي
meter are classified as SI units and 1 kilometer وال شتك ان ا تمتاد نظتام موحتد ل ميتي. الى نظام آخر وهكتذا
is equal to 1000 meter. No doubt, using one الاتتار العتتالم سيستتهل مهمتتة نشتتر العلتتوم والتكنولو يتتا وكتتذلك
unified system of units will facilitate the ستتنرى ان تنستتيا الوحتتدات هتتو احتتد المتالبتتات االساستتية لحتتل
transfer and spread of knowledge for science . المسائل الهندسية
and technology among nations of the globe.
The use of one consistent system is also
essential to solve Engineering problems.
It is well known that the Système international ( اصبح معتمداSI) من المعروف ان النظام الدولي للوحدات
d'unités (SI), is now internationally recognized اال ان, وهتتو النظتتام التتذي ستتنعتمده فتتي هتتذا الكتتتاب, الميتتا
and therefore it will be followed in this text. معرفة االنظمة االخترى والمقتدر لتى التحويتل متن نظتام التى
However, the Engineering calculations require وت تدر االشتار هنتا.آخر يعد امتر اساستي للحستابات الهندستية
the knowledge and application of other الى ان بعض المصاني والمنشئات ال زالت تستخدم ا هز لياس
systems, as well as the methods to convert the . لديمة كمقياس در ة الحرار الذي يقرأ بالفهرنهايت
value of a certain unit from one system to
another. It is worth noting here that some old
instruments, such as temperature indicators
reading Fahrenheit, are still in use by some
industrial plants.
2
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Therefore, it is imperative to study the various اذن ال بد من دراسة انظمة الوحدات المختلفة ومعرفة العاللات
systems of units and learn how to convert units م ل تحويل المتر, المعتمد لتحويل الوحدات من نظام الى آخر
from one system to another, for example meter ا تتافة التتى ذلتتك لتتد ن تتد احيانتتا تترور لتحويتتل. التتى اليتتارد
to yard. In addition, sometimes we need to وحدات صةير المقدار الى اخرى كبير وبالعكس م ل تحويل
convert a small unit to a large one such as لبتتل ان نبتتدأ فتتي. الميليمتتتر التتى المتتتر او المتتتر التتى الميليمتتتر
millimeter to meter or vice versa. But before we دراستتتتة االنظمتتتتة ستتتتوف نو تتتتح معنتتتتى االبعاااااد وارتبااهتتتتا
م نتارا الى التحليل البعاد وهتو اي تاد اللتو او,بالوحدات
start learning about the unit systems we will
معادلتتة تتتربا بتتين متةيتترات او بتتين خصتتائص فيزيائيتتة مختلفتتة
explain the meaning of dimensions and how
. باستخدام االبعاد
they are related to units. We will also study
dimensional analysis which is a method to find
a relationship between different variables, or
physical properties, using dimensions.
119.24 l or
163.6 l
3
UNITS & DIMENSIONS 1 الوحدات واالبعاد
The physical properties of any engineering تتتترابا الخااواا الفيايائيااة لمنظومتتة هندستتية معينتتة بعتتدد متتن
system are interrelated by a number of فمت ال نالحتظ ان لتانون نيتوتن, القوانين الفيزيائية والميكانيكية
physical and mechanical laws. For example وان كتتل متتن. ال تاني يبتتين العاللتتة بتتين القتتو والكتلتتة والتع يتتل
Newton’s second law demonstrates the القوة والتعجيال هتي كمياات متاتقة تتركتب متن كميتات تعترف
ولبتتتل ان.بالكمياااات االساساااية م تتتل التتتزمن والكتلتتتة والاتتتول
relationship between force, mass and
نتارا الى مفهوم االبعاد وتابيقاتها سنتخذ سر ة ريان الماء
acceleration. Force and acceleration are
فتيمكن تعريتف الستر ة هنتا باتول االنبتوب,في االنبوب م تاال
considered as derived quantities made up
: اي ان,مقسوما لى الزمن المستةرا لمرور الماء بو
of base quantities such as time, mass and
length. Before explaining the meaning of
dimensions and their applications, let us
consider the velocity of flow of water inside
a pipeline as an example. The velocity is
defined, in this example, as the length of
the pipe divided by the time required for
the water to pass through the pipeline.
المسافة
Velocity = = السر ة
الزمن
Therefore velocity is a derived quantity; , اذن السر ة كميتة مشتتقة والمستافة والتزمن كميتتان اساستيتان
distance and time are base quantities. In وفي الوالي ان ميتي الكميتات المشتتقة تتركتب متن المستافة او
fact all derived quantities are made up of الاتتولو والتتزمن وكميتتات اساستتية اختترى م تتل الكتلتتة ودر تتة
length, time and other base quantities such وهكذا د ال اول والاامو والكتلاة ودرجاة الحارارة. الحرار
as mass and temperature. As a result, [ واستتنادا التىθ] [ وM][ وT][ وL] ابعاد اساستية يرمتز لهتم
Length, Time, Mass and Temperature are االبعتتاد االساستتية يمكتتن تعريتتف ووصتتف الختتواص والكميتتات
considered as base dimensions having the L او متتتت ال تصتتتتبح ابعتتتتاد الستتتتر ة,الفيزيائيتتتة
symbols [L], [T], [M] and [θ]. Physical
properties and derived physical quantities . M وابعاد الكثافة
are therefore described and defined by
base dimensions. For example, the
dimensional expression of velocity is 2m
written as follows: or L ,
and that for density is M .
Water velocity = 2m/s
سر ة الماء
Evaluate the time
احسب الزمن
4
UNITS & DIMENSIONS 1 الوحدات واالبعاد
The dimensions M show that density is a الى ان الكثافة هي كميةة مشةقةة تعةفM وتشير االبعاد
derived quantity defined as mass per unit . بالكقلة مةسومة على الحجم
volume.
Force is sometimes used as a third dimension يفجح احيانا اسقخدام القوة بعدا اساسةيا االثةا بةدن مةك الكقلةة
[F] instead of mass, or the two combined ولو. واحيانا تسدخدم الكقلة والةوة في آن واحد, [F] ويفمز لها
together. ( تسةاو الكقلةةF) عةدنا الةى نةانون نيةوتك الثةاني وهةو الةةوة
Looking at Newton’s Second law defined as : ( ا انa) ( مضفوبة في القعجيلm)
force (F) equal to the mass (m) multiplied by
acceleration (a):
F = m .a
We find that the base dimensions are لوجةةدنا انبعةةاد انساسةةية مقفاباةةة بهةة ا الةةةانون حيةة ت ةة ح
interrelated as follows: : العالنة بالبعاد كانتي
Force F القو
Mass M الكتلة
5
UNITS & DIMENSIONS 1 الوحدات واالبعاد
z+ + =c (1.1)
In equation (1.1) the symbol z represents height, الى ال تةا وP ( الى االرتفاع و1.1) في المعادلةz يرمز
P for pressure, ρ for density, g for acceleration التى الستر ةu التى التع يتل ال تاذبي وg الى الك افتة وρ
due to gravity, u for velocity, and c denotes a L هتي الاتولz فابعتاد الحتد االول. الى مقدار ابتتc و
constant. The dimensions of the first term z are وبتالتعويض تن ابعتتاد الكميتات الفيزيائيتة للم متتو تين فتي كتتل
those of length, L. By substituting for the . اي تتاL متتن الحتتد ال تتاني وال التتت ن تتد ابعادهمتتا تختتتزل التتى
ونظرا لتناسا ابعاد ارفي المعادلة يصبح استتعمالها فتي ميتي
dimensions of the physical quantities of term 2
. الحاالت دون تحفظ
and term 3 the resulting dimensions of each
term will also be L. The equation is now
dimensionally homogeneous; therefore it can
be used to solve all relevant problems.
Equations derived from experimental data are اما المعادالت التي تشتا لتى استس نتتائ الت تارب المختبريتة
known as Empirical Equations. These equations , فهي ال تستند الى استس فيزيائيتة,فتسمى المعادالت التجريبية
don’t relate to physical principles; they are used وتستتتعمل بحتتذر تتمن الحتتدود التتتي تفر تتها ظتتروف ا تتراء
with caution and within the experimental limits. واحيانتتا ال يشتتترا فتتي ابعتتاد حتتدودها ان, الت تتارب المختبريتتة
However, the empirical equations are important ولهتذه المعتادالت اهميتهتا فتي دراستة ميكانيتك. تكون مت انستة
and useful to solve problems in Fluid هنالك. الموائي لعدم تيسر المعادالت العقلية لحل ميي المسائل
,بعض المعادالت المتألفتة متن حتدود او مجمو اات غيار بعدياة
Mechanics, despite the fact that some of them
وم تتتتال ذلتتتتك الم مو تتتتة,اي ان الم مو تتتتة ال تمتلتتتتك ابعتتتتادا
may not be dimensionally homogeneous. Some
equations are made up of groups with no المعروفة برقم رينولدا
dimensions known as non-dimensional groups,
such as the Reynolds Number, expressed as
6
UNITS & DIMENSIONS 1 الوحدات واالبعاد
1.4.1 cgs system هنالك اربعة انظمة شائعة االستعمال سنبينها في الفقرات االتية
7
UNITS & DIMENSIONS 1 الوحدات واالبعاد
example the metre (m) is considered small to وفي تابيا آخر لد يكون المتر وحد كبير فيستعمل الميلليمتتر
measure distance, thus (km) is used instead. وتعد الوحدات, االول هنا سابقة مصةرm ( وحرفmm)
The k here is a prefix to the meter. In some ويبتتين ال تتدول, وحتتدات مستتتقلةkm وmm ال ديتتد م تتل
applications the meter is too large and the . السوابا الشائعة ومقاديرها1.1
millimeter (mm) is used. The m here is a prefix
it to the meter to convert to a smaller unit. The
mm and km are considered as new length units.
Table 1.1 shows the common prefixes and their
values.
T 1012
Terra
G 109
Giga
M 106
Mega
3
kilo k 10
hecto h 102
deca da 101
deci d 10-1
c 10-2
centi
m 10-3
milli
-6
micro 10
-9
nano n 10
-12
pico p 10
-15
femto f 10
-18
atto a 10
8
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Where gc is a constant equal in value to the ولتو مقتدار مستاو التىF-1 MLT-2 هو ابت ابعتادهgc حيت ان
acceleration of gravity g and it has the g مقدار ابت التعجيل الجاذبي
dimensions F-1 ML-1T-2.
9
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Heat = mass x Specific Heat Capacity x temperature فر درجة الحرارةx السعة الحرارية النو يةx ال اقة الحرارية = الكتلة
difference
( لديناSI ففي النظام العالمي
In SI units:
= ) J( ال اقاة الحرارياة
Heat Energy (J) = Mass (kg)
ML2T-2x Specific Heat Capacity ( K) فر درجة الحرارةx (J/kgK) السعة الحرارية النو يةx (kg) الكتلة
(J/kgK) x Temperature difference (K)
The dimensions of the specific heat capacity in ويالحظ ان ابعاد السعة الحرارية النو ية في التعريف تصبح
the above equation are ML2 T-2 θ-1. If the mass ( لقياس الكتلة و در ةg) واذا ا تمد الةرامML2 T-2 θ-1
is measured by gram (g) and temperature by ( لقياس در ة الحرار تتخذ الحترار وحتد0C) الحرار المؤية
Celsius (centigrade) (0C), the units of the specific . (cal/g 0C و وتصبح وحدات السعة الحراريةca الكالوري
heat capacity will be (cal/g 0C). The units in the ( حيتت ان وحتداتBtu/ lbm 0F) اما في النظام الهندسي فهتي
Engineering system are (lbm 0F /Btu), where the . (Btu الحتترار تستتمى الوحاادة الحراريااة البر انيااة رمزهتتا
(Btu) is the British thermal unit defined as the وتعرف بكمية الحرار الالزمة لرفي در ة حترار باونتد واحتد
amount of heat required to raise the . 01 فهرنهايت الى01 من الماء من
temperature of one pound mass from 60
degrees Fahrenheit to 61.
10
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Substituting for the units in the above وبتتتالتعويض تتتن االبعتتتاد بالوحتتتدات االساستتتية تصتتتبح وحتتتد
expression we arrive at the units of the وهكتذا يمكتن اشتتقاا, التتي تستمى باساكالkgm-1s-2 ال ةا
pressure kgm-1s-2, known as Pascal. The units of . 1.2 انظر ال دول. وحدات الكميات الفيزيائية المشتقة
the other physical derived quantities can be
determined in a similar manner. See table 1.2.
1 psi = ? Pa
psi 1 bar = ? Pa
Common
pressure units
The pressure gauge reading is in psi, does that هل تعني هذه الوحتدات,psi يبين مقياس ال ةا ا اله الوحد
mean anything to you? Find out using an .اي شىء لك ؟ ابحت ن ال واب في االنترنت
Internet search.
11
UNITS & DIMENSIONS 1 الوحدات واالبعاد
12
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Solution الحل
Pressure = Force/Area ال ةا = القو /المساحة
13
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Therefore the unit of pressure Pa in terms of بداللة وحتدات الكميتات االساستية هتيPa اي ان وحد ال ةا
the base units is kgm-1s-2 kgm-1s-2
Converting the kilogram (kg) to pound (lb) and (m) و و المتترlb) ( إلتى باونتدkg) اآلن نحتول الكيلتومرام
the meter (m) to foot (ft) and leaving the ( تبقى كما هتي فنحصتل لتى وحتدs) و وال انيةft) إلى لدم
second (s) unchanged, we arrive at the pressure . pdl/ft2 ايlb ft-1s-2 ال ةا
unit lb ft-1s-2 or pdl/ft2.
: فباستخدام ارلام التحويل
Now, using the conversion factors:
1lb = 0.4536 kg
1 ft = 0.3048 m
1 pa = 0.6719 pdl/ft2
Exercise تمريو
Follow the steps in Example 1.1 to show that : ال بات ان1.1 اتبي الخاوات في الم ال
1 Pa = 0.02088 lbf/ft2 1 Pa = 0.02088 lbf/ft2
Table 1.3 gives the unit conversion factors. . ارلام التحويل من نظام الى اخر1.3 يبين ال دول
14
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Volume
الحجم 1 m3 = 103 litres = 106 cm3 = 103 ml
1 m3 = 35.3145 ft3 = 264.17 US gal = 317.25 UK gal
1 ft3 = 0.028317 m3 = 28.317 litres
If the results of an experiment produce a large اما اذا ازداد دد المتةيرات نتي ة الت تارب المختبريتة وانعتدم
number of variables without a physical تراباها بقانون فيزيتائي فتيمكن استتخدام مليتة التحليتل البعتدي
relationship, then dimensional analysis can be الختتتزال تتددها وو تتي صتتيةة ريا تتية لهتتا .وترتكتتز هتتذه
used to reduce the number of variables and العمليتتة لتتتى استتتاس ترتيتتتب معادلتتة تكتتتون حتتتدودها مت انستتتة
formulate a mathematical relationship. االبعتتتاد .والت تتتانس هنتتتا هتتتو تنستتتيا االبعتتتاد نتي تتتة ت ميتتتي
Dimensional analysis is the method of المتةيتترات لتتى شتتكل م مو تتات ميتتر بعديتتة وبتتذلك تو تتي
transforming the experimental data into an معادلتتتة حتتتدودها خاليتتتة االبعتتتاد ,ولتتتد تارلنتتتا لشتتتر معنتتتى
equation consisting of terms having الم مو ات مير البعديتة فتي الفقتر 1.3و .ان ميلتة التحليتل
homogeneous dimensions. Each term of such البعدي اريقة لتنظيم المتةيرات بصيةة معادلة ريا تية ولكنهتا
an equation, should be made up of a ال تمنح حالً للمعادالت .و يعتود الستبب لو تود وابتت اليمكتن
تقويمها إال با راء ت ارب مختبرية الحقة .
dimensionless group of variables; see section
1.3. Dimensional analysis is a method of سنو تتح فتتي الم تتال 1.2كيتتف يتتتم اشتتتقاا وتنظتتيم م تتل هتتذه
grouping the variables into a relationship المعادلة بالتحليل البعدي .
without offering a final solution. This is due to
the presence of constants in the equation that
can only be evaluated by conducting further
experiments. Example 1.2 shows how to
develop an equation using dimensional analysis.
16
UNITS & DIMENSIONS 1 الوحدات واالبعاد
pressure drop across the orifice ΔP. Apply .د اللة بين المتةيرات مستخدما التحليل البعدي
dimensional analysis to derive a relationship.
Orifice
مقياس فوهي
من تتومة ليتتاس ال ريتتان حيتتت تو تتي صتتفيحة م قوبتتة فتتي1.1 يبتتين الشتتكل
وينتتت تتن ت تتيا ممتتر الستتائل.انبتتوب ال ريتتان معتر تتة الستتائل ال تتاري
.هبواا في ةاو يقاس بواساة المنومتر الم بت في انبي الفوهو
Manometer
منومتر
r
Fig (1.1) The orifice meter ) المقياس الفوهي1.1( التكل
Solution الحل
Step 1: we write the functional relationship: : نكتب العاللة الدالية للمتةيرات: اوال
Q = f (d, ρ, ΔP)
Step 2: since we don’t have any information ليستتت لتدينا معلومتتات تن صتتيةة هتذه العاللتتة الداليتتة: ثانياا
about the type and format of the relationship, it . ولكتتن يمكتتن كتابتتة الدالتتة بو تتو تتام بصتتيةة متسلساالة قااو
can be written as a power series. This implies وهذا يعني باالمكان و ي الدالة لى شكل م مو ة من الحدود
assigning a number of terms, each term made يتألف كل حد من حاصتل ترب المتةيترات المستتقلة مرفو تة
up of a product of the independent variables وفتي هتذا الم تال لتدينا تالت متةيترات, إلى اسس م هولة القيم
raised to an unknown power. In this example, ΔP وρ وd اي ال يعتمد بع ها لى اآلخر هي, مستقلة
we have three independent variables d, ρ and
ΔP
17
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Assume an unknown power to each variable: : نفترض اسا ً م هوال لكل متةير
Now we can write the power series as: : اآلن ن ي صيةة متسلسلة القوى لهذه الدالة وهي
The power series is then reduced to one term; وهتذا التبستيا ال يختل, م نختزل المتسلسلة إلى حد واحتد فقتا
this will not disturb dimensional homogeneity. . بتحقيا الت انس البعدي الذي يعد اساسا لعملية التحليل البعدي
Step 3: substitute for the variables dimensions: : ندرج ابعاد المتةيرات: ثالثا
[Q] = [L3T-1]
[d] = [L]
Dimensions of density (mass/volume): : ابعادالك افة هي ابعاد الكتلة مقسومة لى ابعاد الح م
[ρ] = [MT-3]
Dimensions of pressure drop: : ابعاد فرا ال ةا
[∆P] = [MT-1T-2]
18
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Step 4: we substitute the variables’ dimensions و1.3 نعوض ن ابعاد المتةيرات في المعادلة: رابعا
in equation (1.3)
Step 5: we write an equation for the powers of و, نكتب معتادالت الستس كتل متن االبعتاد االساستية: خامسا
each of the base dimensions. The left side of وان الاترف. هذا في والي الحتال هتو تابيتا الت تانس البعتدي
equation 1.4 does not include the dimension M لتذلك ن عتل االسM ال يت من البعد1.6 االيسر من المعادلة
and therefore the value of the power is zero. . Mn3 وMn2 لتتتتو صتتتتفرا ط امتتتتا الاتتتترف االيمتتتتن فيت تتتتمن
The right side has Mn2 and Mn3 and so the و هكتذا تصتبح المعادلتة, و ند رب المقدارين ي مي استاهما
equation for the dimension [M] will be: :] االتيM[ االسس للبعد
0 = n2 + n3 (1.5)
The equation for the dimension [L] is: ]L[ ومعادلة البعد
3 = n1 + (-3n2) + (-n3)
3 = n1 – 3n2 – n3 (1.6)
-1 = -2n3
1 = 2n3 (1.7)
19
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Step 6: we evaluate the unknown powers, امتا بصتور نهائيتة او بداللتة, نقوم االستس الم هولتة: سادسا
either numerically or in terms of other powers. .دد مختزل منها
n3 = 1/2
n2 = - n3
Therefore : اذن
n3 = - 1/2
: لى ( نحصل1.0) وبالتعويض وتبسيا المعادلة
Substituting in equation (1.6):
n1 = 2
In this example we evaluated all powers . ً و هنا استاعنا أن نقوم ميي األسس نهائيا
numerically.
Step 7: we substitute in equation و1.3 : و تن لتيم االستس لنحصتل1.3 نعوض فتي المعادلتة: سابعا
: لى
Q = K1 . d2 . ρ-1/2 . (ΔP)1/2
a- By applying dimensional analysis we باالستعانة بعمليتة التحليتل البعتدي توصتلنا لمعادلتة مفيتد -أ
derived a useful equation to evaluate . لحساب معدل ريان أي سائل ي ري في أنبوب معين
the flow rate of any fluid in a pipeline.
20
UNITS & DIMENSIONS 1 الوحدات واالبعاد
b- The constant K1 should be evaluated بتا راء ت تارب مختبريتة أو بتأيK1 ينبةي تقويم ال ابتت-ب
using experiments or any other . اريقة أخرى
method.
Exercise تمريو
Experiments for the flow of a fluid inside a تشير الت ارب المختبرية ل ريان مائي في انبوب لتى ان فترا
pipeline indicate that the pressure difference is و لتىl و اولوd يعتمد لى لارهΔP ال ةا بين نهايتيو
a function of the pipe diameter d, its length l, تتد. µ ولزو تتتوρ وك افتتتوu ستتر ة ريتتان المتتائي فيتتو
the fluid velocity u, the fluid density ρ and the لمتا ان ابعتاد, اللة بين المتةيرات مستخدما التحليل البعدي
fluid viscosity µ. Use dimensional analysis to : اللزو ة
develop an equation for the system. The
dimensions of viscosity are:
Note مكحظة
You will find 5 unknowns in this example, and ستحصتتل لتتى خمس تة م اهيتتل فتتي معتتادالت االستتس ال ت الت
therefore the power equations will be solved in , و ليو ال يمكن تقويم االسس نهائيا وانما تحل بداللة م هتولين
terms of two unknowns such as n2 and n5. وبترتيب المعادلتة النهائيتة لتى شتكل م تامييn2 وn5 م ال
Arranging the equation as dimensionless groups : مير بعدية ستتوصل الى الصيةة االتية
the answer will be in the form:
n2 n5
(ΔP/ ρu2) = K1 (l/d) (µ/duρ)
21
UNITS & DIMENSIONS 1 الوحدات واالبعاد
Length L m l الاول
22
UNITS & DIMENSIONS 1 الوحدات واالبعاد
1.2 Compare the different unit systems and اكتتب مقارنتة النظمتة الوحتتدات وبتين لمتاذا اشتيي ا تمتتاد1.1
indicate why the SI system is used widely. . النظام العالمي
1.3 Show that Reynold’s number Re is a non- هتتيRe ا بتتت ان الم مو تتة المعروفتتة بتترلم رينولتتدز1.3
dimensional group. What is the significance of ما هي اهمية هذه الم مو ة ؟, م مو ة ميربعدية
this group?
1.4 The resistance R to a falling spherical body لحركة سقوا سم كتروي ختالل متائيR تعتمد المقاومة1.4
through a fluid is a function of its velocity and فاذا كان نصف لار ال سمµ ولزو ة المائيu لى سر تو
the viscosity of the fluid. If the diameter of the . د اللة بالتحليل البعديd
sphere is d, find a relationship by dimensional
analysis.
Ans. ج
( R = Kµru)
1.5 The power generated by a pump PE is a دالتتة لمعتتدلPE اذا كانتتت القتتدر التتتي تولتتدها م تتخة1.1
function of the volumetric flow rate Q, the h وإلى ارتفاع مود السائلQ ال ريان الح مي او التصريف
height of liquid column (liquid head) h and the تد اللتة, g و إلتى التع يتل ال تاذبيρ وإلتى ك افتة الستائل
density of the liquid ρ. Apply dimensional . بالتحليل البعدي
analysis to derive a relationship.
Ans. ج
(PE = KQ ρgh)
23
UNITS & DIMENSIONS 1 الوحدات واالبعاد
1.6 If the height of the liquid in a capillary اذا لمت ان ارتفاع السائل في انبوبة شعرية دالة لنصف1.1
tube h is a function to the radius r, the surface وρ وإلى ك افة السائلσ وإلى الشد الساحيr لار االنبوب
tension σ, the density of the liquid ρ and to the . د اللة بالتحليل البعديg إلى التع يل ال اذبي
gravity acceleration g, find a relationship by
dimensional analysis.
Ans. ج
= K (σ/ ρgr2)
24
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
After completing this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
25
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Studies regarding flow through ducts, pipes or أن دراسمممة موضمممعات مثمممل جريمممان الموائمممع فمممي القنممموات او
packed solids require information about االنابيممب او عبممر الجسمميمات الصمملبة تتطلممب معرفممة الخممواص
physical properties, such as density and الفيزيائية للموائمع ,مثمل الكثافمة واللزوجمة ,اضمافة المر بعمض
viscosity, as well as some flow basic concepts المفاهيم االساسية التي سنتطرق اليها في هذا الفصل .
which we will cover in this chapter.
26
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
2.3 Shear Stresses in moving fluids في الموائع المتحركة اجهادات الق2.3
Shear stress arises in a fluid due to its motion , تتولد اجهادات الق في الممائع اثنماء حركتمت او جريانمت فقمط
and therefore is considered as one of the flow وهمذا يعنمي. لذا تعد من خصائص الجريان كالضغط والسمرعة
characteristics similar to pressure and velocity. انعدام اجهادات القص عندما يكمون الممائع فمي حالمة السمكون او
This means that shear stresses don’t exist when . عنمممدما تكمممون سمممرعة الجريمممان متسممماوية فمممي جميمممع نقاطمممت
the fluid is at rest or moving with a uniform وسنالحي في معيم الحاالت ان الممائع يجمري وهمو بتممام ممع
velocity. As the fluid normally flows over a solid ان طبقممة المممائع. تخككص ص ك مثممل جريممان الممنفط فممي االنابيممب
boundary, the layer in contact with the surface المالمسممة للسممط تلتصممق بممت وبممذلا تكممون سممرعة هممذه الطبقممة
adhere to it and obviously will have the same مساوية سرعة التخم اي تساوي صمفرا اذا كمان المتخم فمي حالمة
وتتغير سرعة الطبقات المتتالية كلما ابتعدنا عن التخم. السكون
velocity. If the boundary is at rest, then the
وافضممل مثممال علممر ذلمما, )2.1( كممما هممو موض م فممي الشممكل
velocity of the fluid layer is zero. However, the
.هوجريان النفط في االنابيب الناقلة
velocity of fluid layers measured at points
above the surface will have different values, as
shown in fig (1.2). A good example is the flow of
oil in pipelines.
27
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
28
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
The changing value of velocity at different و يشير تغيير سرعة الجريان فمي نقماط مختلفمة البعمد ممن المتخم
points from the surface indicates the existence . الصلب الر وجود قوى احتكاكية بين طبقات الممائع المتتاليمة
of frictional forces between the successive وبسبب القوى تتولد اجهادات القص في طبقات الموائمع الجاريمة
layers of the fluid. Consequently, shear stresses الممؤثرة فميF بانمت القموةτ لمذا يمكمن تعريمف اجهماد القمص,
are developed within the layers of fluids in . A المساحة السطحية
motion. Thus, shear stress τ can be defined as
the force F acting on a surface area A.
τ= (2.1)
In contrast to pressure, shear stress is a vector و بخالف الضغط فان اجهاد القص كمية متجهة أي لها اتجماه
quantity having value and direction with units . )ML-1T-2 ( ) و ابعادهاN/ m2( ووحدتها هي, ومقدار
(N/m2) and dimensions (ML-1T-2 ).
u= (2.2)
Where l is the displacement and t is time الر الزمنt الر االنزياح او االزاحة وl يرمز
29
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Speed is also the rate of change of position, but يختلف االنطالق عن السرعة بكونت كمية غير متجهة وعليمت
it is a scalar quantity and therefore it has the . يمكن القول ان االنطالق هو سرعة بدون اتجاه
same value as velocity without direction.
Equation (2.3) actually demonstrates the ) في واقمع الحمال همي تطبيمق لنيريمة االتصمال2.3( المعادلة
application of the continuum hypothesis. It حي تفترض الكثافة لها نفم القيمة الي حجمم ممن الممائع مهمما
implies that the density has the same value for ولكن الحجم الصغير يجب أن يبقر كبيمرا مقارنمة, يكن صغيرا
any volume of the fluid no matter how small it . بابعاد الجزيئات لكي يصب تأثير حركة الجزيئات مهمال
is. However, the small volume should remain
significant in comparison to the size of the
molecules, and as a result, the influence due to
30
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
motion of the molecules will be negligible. وعلر هذا االسام يمكن افتمراض كميمات مثمل الضمغط
Accordingly, we can assume quantities such as وال يمكممن. والسممرعة ثابتممة المقممدار فممي أي نقطممة مممن المممائع
pressure and velocity will have constant values تطبيق نيرية االتصال علر الغازات النادرة أو الغازات الخاملة
at any point within the fluid. The continuum . الن البعد بين جزيئاتها يكون كبيرا
hypothesis cannot be applied to inert and rare
gases because the distance between molecules
is large.
2.6 Density, Specific Gravity, Relative الكثافكة النسكةية, الثقل النو ي, الكثافة2.2
Density and Specific volume والحجص النو ي
Density is the mass of a unit volume denoted as وحمممداتهاρ الكثافككة همممي كتلممة وحمممدة الحجمموم و يرممممز لهمما
ρ; it has the units (kg/m3) and dimensions )2.3( ) وقمممد عرفناهممما بالمعادلمممةML-3( ( و ابعادهممماkg/m3(
(ML-3). Density is defined by equation (2.3). : التي تكتب عادة بالصيغة اآلتية
However, the following definition is commonly
used:
ρ= (2.4)
Specific weight or weight density γ is the الثقل النو ي ويسمر احيانا الوزن النوعي أو الكثافة الثقي ة
weight of unit volume; it has the units (N/m3) ) N/m3 ( وحداتمتγ ويعرف بثقل وحدة الحجوم و يرمز لمت
and dimensions of force divided by volume. . وابعاده هي ابعاد القوة مقسمومة علر ابعاد الحجم
γ=
∴γ=ρg (2.5)
31
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Relative density or specific gravity is defined as الكثافة النسةية هي نسبة الثقل النوعي للمائع لر الثقمل النموعي
the ratio of specific weight of the fluid to the . وتساوي أيضا كثافة المائع مقسمومة علر كثافة الماء,للماء
specific weight of water. Another common
definition is the ratio of the density of fluid to
the density of water.
Specific volume ν is the reciprocal of density; it ووحداتممتν الحجككص النككو ي هممو مقلمموب الكثافممة ويرمممز لممت
has the units (m3/kg) and dimensions (L3M-1). . ) L3M-1) ) و ابعادهm3/kg)
ν= = (2.6)
32
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
a- Keeping the velocity u and the thickness y عنمد ثبموتA تتناسب طمردا ُ ممع المسماحةF ان القوة -أ
unchanged, the force A will be proportional to : أي أنy والسماu كل من السرعة
the area A, therefore:
F αA
b- Keeping the area unchanged, the force عنمد ثبموت تتناسمب طمردا ممع المقمدارF القوة-ب
F will be proportional to , therefore:
: اي,المساحة
F α
The ratio denotes the rate of change of تمثممل النسممبة ( ) معممدل تغيممر السممرعة و تسسمممر
velocity known as shear rate, or velocity )T-1( ابعادهممما, معككدل القككك او تكككدر السككر ة
gradient, having the dimensions (T-1) and ) و يمكممن كتابممة نتممائج التجربممة علممرs-1( ووحممدتها
units s-1. The experiment results can be written الوجت االآتي
as
F αA
Or: أو
According to equation (2.1), ( ( is the shear , )2.1( حسب المعادلة τ هو اجهاد القص ) (
stress and therefore shear stress is proportional مممن هممذا نسممتنتج ان اجهمماد القممص يتناسممب طممردا مممع
to the shear rate. Fig 2.3 shows the linear خط ما بيانيمما لهممذه2.3 و يمثممل الشممكل. معممدل القممص
relationship between shear stress and shear التجربة اذ يبمين الخمط المسمتقيم العالقمة الطرديمة بمين
rate. .اجهاد القص ومعدل القص
33
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
34
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
The relationship can also be written in the : ويمكن كتابة العالقة بصيغة المعادلة اآلتية
following format:
τ α
The velocity u decreases as the thickness y لممذا يكتممبy تتنمماقص بازديمماد البعممدu و لممما كانممت السممرعة
increases, and infinitesimal velocity changes will
,) ( تممدرا السمممرعة للتغيمممرات متناهيممة الصمممغر بالصممميغة
be written as ( ), thus we can write:
: وعليت يمكن كتابة المعادلة كاآلتي
τ = - µ (2.7)
The proportionality constant µ is known as اللزوجة أو ال زوجة الديناميةµ ويطلق علر ثابت التناسب
viscosity or dynamic viscosity and equation .) قانون نيوتن ل زوجة2.7( و تمثل المعادلة
(2.7) represents Newton’s viscosity law.
Substituting for units of each quantity in وعنممد تعممويض الوحممدات لكممل مممن السممرعة والبعممد واجهمماد
equation (2.7) we arrive at the units of viscosity ) يتضم ان وحمدات اللزوجمة همي2.7( القص في المعادلمة
as (Ns/m2) or (mNs/m2), with the dimensions of واحيانما. ) ML-1T-1( ) وابعادهماmNs/m2( ) اوNs/m2(
(ML-1T-1). The poise p or the centipoise cp, are حي أنcp او سنتيةويزp يستخدم الةويز رمزه
also used, where (1p = 100 cp) and: : ( وكذلا1p = 100 cp(
There are instruments available to provide وبمماالخص,تتمموفر اجهممزة لقيممام لزوجممة السمموائل بدقممة عاليممة
accurate values of viscosities for liquids, . لزوجة المواد النفطية مثل الزيوت الثقيلة
particularly petroleum and heavy oils.
35
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
The units of ν are (m2/s) and dimensions (L2T-1); ) ويسممتخدم السككتوكm2/s ( ) ووحممدتهاL2T-1( ابعادهمما
stoke is the unit in the cgs system. ثانية- رام-احيانا وهو من النيام سنتمتر
1 stoke = 10-4 m2/s
The kinematic viscosity values for gases are وتجدر مالحية ارتفماي مقمدار اللزوجمة الكينماتيمة للغماز نسمبة
higher than liquids, because of the low values of بينممما تكممون لزوجممة السمممائل,لممر سممائل بسممبب انخممف كثافتمممت
gas densities; whereas the dynamic viscosity ويتغيمممر مقمممدار اللزوجمممة.الديناميمممة اعلمممر ممممن لزوجمممة الغممماز
values are higher for liquids. Kinematic viscosity الكينماتية للغازات بتغير الضمغط الن االخيمر يمؤثر علمر مقمدار
is affected by pressure due to density variation. .الكثافة
Any rise in temperature will lower the viscosity امما الغمازات, تنخفض اللزوجة بارتفاي درجمة حمرارة للسموائل
of liquids and will increase viscosity of gases; فتزداد لزوجتها بازدياد درجة الحرارة كمما يتضم فمي الشمكلين
وتجدر المالحيمة بمان النظريكة الحركيكة ل زكازات2.5 و2.4
see Fig 2.4 and Fig 2.5. It is worth noting that
تؤكد ازدياد مقدار اللزوجة بارتفاي درجمة الحمرارة اضمافة لمر
experimental data, as well as Kinetic theory,
. ما تيهره التجارب المختبرية
demonstrate the increase of viscosity for gases
with temperature.
1 cp = 0.001 Ns/m2
100
11
10 Sulphuric acid
Crude oil
Water
0.1
0.01
0 20 40 60 80 100 120 140
36
T 0C
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
1 cp = 0.001 Ns/m2
Fig 2.5 Viscosity of gases as a function of temperature تغير اللزوجة مع درجة الحرارة للغازت2.5 الشكل
0.04
0.035 Air
0.03
Oxygen
μ (cp) Nitrogen
0.025
Chlorine
0.02
0.015
Methane
0.01
Carbon Dioxide Ammonia
0.005
0
-200 -100 0 100 200 300 400 500
T 0C
You can find more information on liquid and gas viscosities on the link
https://en.wikipedia.org/wiki/Viscosity
37
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Solution الحل
Convert the units of viscosity to Ns/m2 Ns/m2 نحول وحدات اللزوجة لر
2
y A=0.4m2
1 u = 1m/s
The thickness of the gap on each side of the 0.5mm سما الفجوة علر جمانبي الصمفيحة المتحركمة يسماوي
place is 0.5 mm. Shear is developed on both و يالحي ان القص يتولد علمر جمانبي الصمفيحة المتحركمة لمذلا
sides of the plate and therefore the area will be : يجب ان نتخذ ضعف المساحة
doubled to:
A =2 x 0.4 = 0.8 m2
τ = -µ
-µ
38
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Integrating between points 1 and 2 2 و1 ثم اجراء مكاملة بين النقطتين
F/A ∫ =-µ∫
y1 = 0.0
Therefore: = µ u1/y2
Or:
F = μ A u1/y2
F = 23.68 N
u = (3/4) (y) – y2
Draw the velocity distribution and calculate the ارسم منحنر توزيع السرعة ثم احسب مقدار اجهاد القص علمر
shear stress at 0.15 m from the plate. The 14.34 stoke علما ان لزوجة المائع الكينماتية0.15 m بعد
kinematic viscosity is 14.34 stoke and the 950 kg/m3 وكثافتت
density of the fluid is 950 kg/m3.
39
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Solution الحل
Substituting 5 values for y in the velocity ونحسمبy نعوض في معادلة توزيمع السمرعة خمسمة قميم للبعمد
distribution equation and then calculating u, we : باستخدام برنامج اكسل لنتوصل الر الجدول التاليu قيم
get the following table: (use Excel)
y (m)
0.18
0.16
0.14
0.12
0.1
0.08 Velocity distribution
0.06
0.04
0.02
0 u (m/s)
0 0.05 0.1 0.15
Fig 2.6 Velocity distribution curve منحنر توزيع السرعة 2.2 الشكل
40
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
We notice in Fig 2.6 that the velocity is zero at ان السممرعة تسمماوي صممفرا فممي نقطممة2.6 نالحممي فممي الشممكل
the contact point with the plate. It increases as و تمزداد بازديماد البعمد حسمب, تمام المائع لدى سمط الصمفية
the distance increases according to the velocity معادلة توزيمع السمرعة الممثلمة بمالمنحني ونالحمي ممن المخطمط
distribution relationship. We can also notice . ايضا ان المائع يجري بطبقات مختلفة السرعة
that the fluid layers flow over the surface with
كماu و تزداد السرعة, (2.7 ) من المعادلةτ يمكن حساب
different velocities. τ can be calculated using
: لذا تحذف عالمة الناقص وتصب المعادلةy بازدياد,ذكرنا
equation (2.7). However, as the velocity u
increases with the increase of y, the minus sign
is cancelled and the equation becomes:
τ = µ
µ
ν=
The units of ν are stoke and hence should be لممذا ينبغمي تحويلهمما لممرstoke همميν و لمما كانممت وحمدات
2
converted to m/s and according to section 2.7 : فان2.7 و طبقا لما ورد في الفقرةm2/s
we have:
1stoke = 10-4m2/s
Therefore: : اذن
Substituting ν into the above equation: : في المعادلة اعاله نحصل علرν وبالتعويض عن
-4 2
μ = (14.34 x 10 ( )059( = 1.362 Ns/m
To get the value of we differentiate the : نفاضل معادلة توزيع السرعة و للحصول علر قيمة
velocity distribution equation:
u = (3/4) (y) – y2
41
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
= (3/4) -2y
Comments المالحظات
a- In this example, is the velocity سممي توزيمع يتوض من هذا المثال ان المقمدار -أ
distribution which was previously السممرعة الممذي سممبق ان سمممي معممدل القممص و يممدعر
named ‘shear rate’; it is also known as .ايضا تدر السر ة
velocity gradient.
b- The minus sign, in equation )2.7(, will ) حين تمزداد2.7( تحذف عالمة الناقص في المعادلة-ب
be cancelled whenever the velocity .السرعة بازدياد البعد عن التخم الصلب
increases with the distance from the
solid boundary.
Exercise تمرين
Find the dynamic viscosity of crude oil at 25C0 جد قيمة اللزوجة الدينامية للنفط الخام بدرجة حرارة
from Fig 2.4; then calculate the kinematic ثم احسب اللزوجة الكينماتيمة2.4 من الشكل25 C0
viscosity in stoke. The specific gravity of the oil 0.89 علما ان الكثافة النسبية للنفط. بوحدات ستوا
is 0.89
42
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Surface tension is a fluid property that may , وهو خاصة من خواص الموائع التي تؤثر أحيانما فمي سملوكها
have an influence on liquid behavior. It arises as وينتج من عدم تموازن قموى التجماذب بمين جزيئمات السمائل لمدى
a result of the imbalance in cohesive forces of وتجذب الجزيئات فمي الممائع بعضمها بعضما بالتسماوي.سطحت
the molecules at the liquid surface. The ولكن عند سط السائل الذي يمثل في الواقع,بجميع االتجاهات
molecule attractions are uniform within the تصممب قمموى التجمماذب الممر,سككطب ةينككي بممين السممائل والهممواء
mass of the liquid, but not at the surface. The وييهمر سمط. االعلر مختلفة عن القموى الممؤثرة لمر االسمفل
ويحد الشمد.السائل وكأنت شاء مطاطي تحت تاثير قوم شد
surface is actually an interface between liquid
, السطحي لدى تجاور السائل مع مائع آخمر او جسمم صملب
and air. As a result of the variation in upright
ويرمز لت الذي يمثل قوة الشمد السمطحي علمر وحمدة الطمول
and downward forces, an elastic hypothetical
)N/m( وحداتمت, لسط السائل و هو يتأثر بدرجمة الحمرارة
membrane is formed; it appears as if it is under
و يشاهد أثر الشد السطحي من طفمو بعمض. )MT-2 ( وابعاده
the influence of a tensile force. Surface tension
مثمل األبمرة اوالمموم علمر سمط المماء اذا, األجسام الصمغيرة
develops whenever a liquid is in contact with
و تغطم هذه االجسام اذا ثقب الغشاء السطحي. وضعت بعناية
another liquid or a solid boundary. It is defined
. للماء
as the tensile force acting on a unit length of ان يمماهرة ارتفمماي السمموائل فممي األناةي ك الشككعرية هممي نتيجممة
the liquid surface, denoted , having units ل تماسك بمين جزيئمات السمائل و التالصكق بمين جزيئمات السمائل
(N/m) and dimensions (MT-2). Surface tension حي تتفوق قوى التالصق علر قموى التماسما,وجدار األنبوب
will change in value according to temperature . فتسحب السائل الر االعلر في االنبوب الشعري
variation. The phenomenon of surface tension ومممن اليممواهر الناتجممة ع من تمماثيرات الشممد السممطحي الجريككان
can be demonstrated by placing a needle or a وكممذلا, كجريممان خلمميط مممن السممائل والغمماز, ثنككائي الطككور
thin blade on the surface. The floating small وعنمممدما تتكمممون. تكممموين قطمممرات السمممائل و نشممموء الفقاعمممات
objects sink into the liquid once the surface قطرات السائل أو الفقاعات فالضغط في داخلها يسلط قوة تعادل
membrane is pierced. قوة الشد السطحي المؤثرة في محيطها كما هو مبين فمي الشمكل
The rise of liquids in capillary tubes is due to . 2.7
the cohesion between liquid molecules and the
adhesion of the liquid molecules to the tube
wall. In this case, the adhesive forces exceed
the cohesive forces and consequently the liquid
is pulled upwards inside the capillary tube.
Surface tension influence plays a role in two
phase flow, such as the flow of a liquid-gas
mixture, as well as the formation of drops and
bubbles. However, for drops to form, the
surface tension forces acting on the
تأثير الشد السطحي في قطرة كروية2.2 الشكل
circumference of the drop must balance the
Fig 2.7 Effect of surface tension on a drop
forces due to pressure, as seen in Fig 2.7.
43
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
r2 P.π
القوة المعاكسة بسبب الشد السطحي تساوي
The opposite force due to surface tension is:
2π r
2
P.π r = 2π r
P= (2.9)
If the surface tension value is known, then the قيمة الضغط في داخمل القطمرة عنمد معرفمة2.9 تعطي المعادلة
pressure inside a drop can be calculated by وعممادة تممدرا قمميم الشممد السممطحي للسمموائل مممع, الشممد السممطحي
Equation 2.9. Values of surface tension for . الخواص األخرى
liquids are often included with other liquid
properties.
Show that the height of water h in a capillary فمي أنبوبمة شمعرية كمما همو مبمينh برهن علر أن ارتفاي الماء
tube in Figure 2.8 is given by: : هو2.2 في الشكل
h=
ρ
Estimate the diameter of the capillary tube 30 cm ثمم جمد قطمر األنبموب الشمعري المذي يرتفمع فيمت المماء
holding 30 cm of water at 20 C0. The angle علممما بممأن زاويممة التمممام بممين الممماء وجممدران20 C0 بدرجممة
between the tube wall and the water θ is zero. . تساوي صفراθ األنبوبة
Surface tension is 0.073 N/m and density kg/m31999 والكثافة0.073 N/m الشد السطحي
1000 kg/m3
44
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
Figure 2.2
2.2 الشكل
Solution
الحل
Atmospheric pressure acts on the surface of the بممدءا أن الضممغط الجمموي متسمملط علممر سممط السممائل فممي داخممل
liquid inside as well as outside the tube; فهذا يختزل تأثيره وتصب قوة سحب المماء, األنبوبة وخارجها
consequently, its influence is cancelled. Thus, لر األعلر من أثر الشد السطحي تساوي القوة الناجمة عن ثقمل
the force due to surface tension pulling the . عمود الماء في األنبوبة
liquid upwards is balanced by the force due to
the weight of the liquid column.
The upward force = the vertical component of قوة السحب لر األعلر = مركبة الشمد السمطحي لمر
surface tension force x the circumference of the محيط األنبوبx األعلر
tube
= cos .πd
45
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
The weight of the liquid column = mass x gravity التعجيل الجاذبيx ثقل عمود الماء = الكتلة
= volume x density x gravity acceleration التعجيل الجاذبيx الكثافةx = الحجم
g . ρ (π/4) . d2 . h
x π = g . ρ (π/4) . d2 . h
h=
ρ
= 0.0, ∴ cos =1
= 0.073 N/m
g = 9.81 m/s2
ρ = 1000 kg/m3
h = 30 cm = 0.3 m
h=
ρ
0.3 =
d =2.97x 10-5 m
d = 0.0297 mm
46
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
E=
E=-V (2.10)
The negative sign indicates that any increase in وتشير عالمة الناقص هنا لر تناقص الحجم عند زيادة الضغط
pressure will cause a decrease in volume.
Considering a unit mass of the gas 1 kg we have: : تصب كثافتة1 kg و ذا اتخذنا وحدة الكتلة من الغاز
ρ= = , V= ( 2.11)
ρ
Therefore: : اذن
Vρ=1
Vdρ + ρdV = 0
47
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
dV = - ( )dρ
dV = - (1/ ρ )
2
dρ (2.12)
Combining equations (2.10, 2.11 and 2.12) (2.19 ) في المعادلةdV وV ثم نعوض عن قيم
E=ρ (2.13)
It is apparent from equation (2.13) that the تعتمممد علممر عالقممةE ( أن قيمممة2.13) يالحممي مممن المعادلممة
value of E depends on the relationship between ومادامممت الكثافممة تعتمممد بممدورها علممر درجممة,الضممغط بالكثافممة
pressure and density. Since density is a function ويتخمذ معاممل. تتأثر بتغير درجة الحرارةE فقيمة, الحرارة
of temperature, the value of E will also depend ولمت ابعماد القموة مقسممومةN/m2 المرونمة الحجممي وحمدات
on temperature. The units of the modulus of . ) ML-1T-2 ( علر المساحة أي
elasticity are N/m2 and its dimensions are those
of force divided by area, ML-1T-2.
48
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
49
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
50
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
2.2 If the kinematic viscosity of petroleum liquid 103 ذا علمت ان مقدار اللزوجة الكينماتية لسائل نفطي2.2
is 193 centistoke and its specific gravity is 0.92, جمد زلوجمة السمائل بانيممة,0.92 سنتيسمتوا وكثافتمت النسمبية
determine the viscosity of the liquid in the الوحدات اآلتية
following unit system:
ثانية- باوند-( أ ) نيام قدم
(a) fps, (b) cgs system, and (c) SI رام – ثانية-( ب ) نيام سنتيمتر
( ا ) النيام الدولي
2.3 The mass of a barrel of oil is 37 kg and its 0.15 m3 وحجمت37 kg تبلس كتلة برميل مملوء نفطا2.3
volume is 0.15 m3. If the mass of the empty احسممب الثقممل, 1.3kg فممإذا كانممت كتلممة البرميممل الفممارغ
barrel is 1.3 kg, calculate the specific weight of النوعي للنفط
the oil.
2.4 A piston, 14.95 cm in diameter, moves فمي داخمل اسمطوانة14.95 cm يتحرا مكبم قطمره2.2
inside a cylinder, 15 cm in diameter. The gap is فماذا كمان الحيمز البينمي مملموءا زيتما لزوجتمت15 cm قطرهما
filled with oil whose viscosity is 0.60 poise. If a جد السرعة التي يندفع بها المكبم تحمت تمأثير, 0.60 poise
force of 7.848 N is applied to the piston, باتجاه الحركة علما ان طمول المكمبم7.848 N قوة مقدارها
estimate the velocity of the piston. The length 21.7 cm يساوي
of piston is to be 21.7 cm.
Ans ا
0.32 m/s
2.5 The velocity distribution for the flow of a تتمدرا سممرعة جريممان الممائع فممي انبمموب ممن جدرانممت لممر2.5
fluid inside a pipe is: خط محوره حسب المعادلة
u(r1) = u0 [ 1- (r1/r)2 ]
Where r is the diameter of the pipe and r1 is the هممو نصممف القطممرr1 هممو نصممف قطممر االنبمموب وr حي م ان
varying diameter, so that: : اي, المتغير
51
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
u0 is the velocity along the central line of the هي سرعة الجريان علمر امتمداد الخمط المركمزي او خمطu0 و
pipe. Find a relationship that can be used to جد عالقة تستطيع ان تحسب بها اجهاد القص.المحور
calculate shear stress.
سمممجلت النتمممائج المجدولمممة ادنممماه لتجربمممة تخمممص محلمممول2.2
2.6 The results of an experiment for a solution
of water and a polymer at 24.5 0C are given in 24.5 0C بوليمر – ماء بدرجة
the table below:
(a) Draw a graph for shear stress as a (أ) ارسم خطا بيانيا يمثل اجهاد القص دالة لمعدل القص
function of shear rate
(b) Draw a graph for viscosity as a function (ب) ارسم خطا بيانيا يمثل اللزوجة كدالة لمعدل القص
of shear rate
(c) Do the graphs show a proportional (ت) هممل تيهممر الخطمموط البيانيممة عالقممة طرديممة بممين اجهمماد
relationship for Shear stress and shear القص ومعدل القص؟
rate?
2.7 The relationship for volume changes of air تكتممب معادلممة تغيممر حجممم وضممغط الهممواء بثبمموت درجممة2.2
due to pressure at constant temperature is: : الحرارة علر النحو اآلتي
PV = constant
52
PHYSICAL PROPERTIES OF FLUIDS 2 الخواص الفيزيائية للموائع
The equation for the isentropic process is و تكتب معادلة العملية بثبوت االنتروبي العم يكة االيسكنتروةية
written as follows: علر الوجت اآلتي
PV1-4 = constant
Show that the modulus of elasticity for the first E = P : برهن علر ان معامل المرونة للعملية األولر
operation is: E=P
2.8 Derive a relationship for the rise of a liquid جد عالقمة لحسماب ارتفماي السمائل بسمبب الشمد السمطحي2.8
between two parallel plates. بين صفيحتين متوازيتين
Water boils at a height of 1000 m at a بدرجمة حمرارة اقمل ممن1000 m يغلمي المماء علمر ارتفماي
temperature less than 100 C0. 100 0C
Investigate the following topics using the اسممتخدم االنترنممت ومصممادر اخممرى للبحمم فممي الموضمموعات
internet and other sources of literature. Write a . التالية وأعد تقريرا لكل بح متضمنا ذكر المصادر المعتمدة
report on your findings including references.
2.10.1 Specific gravity is an important property تعد الكثافة النسبية خاصة مهمة لتصنيف المنفط الخمام2.22.2
to identify crude oil. The API gravity is a كممممما ويسمممممر مقيممممام ثقممممل او خفممممة الممممنفط مقارنممممة بالممممماء
measure of how heavy or light the crude is API gravity
compared to water.
2.10.2 The Society of Automotive Engineers ( نيممامSAE) أسسممت جمعيممة مهندسممي السمميارات2.22.2
(SAE) has established a numerical code system
لتصنيف زيت محركات السيارات يعتمد اللزوجة كاسام لتميمز
for grading motor oils according to their
خصائصت
viscosity characteristics.
2.10.3 Reid vapour pressure (RVP) is a common ( مقياسمما لمممدى تبخممرRVP) يعممد ضممغط بخممار ريممد2.22.3
measure of the volatility of gasoline. الكازولين
53
FLUID STATICS 3 الموائع في حالة السكون
After completing this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Determine the pressure and pressure head at تقديرالض غ و مومغغمد الض غ و اغغا اا غ اء المغغا .1
various points in a static fluid الساكن
2. Explain the concept of manometers and apply تمضغغغغيه مفهغغغغمم ومغغغغل المغغغغانممترا متوبيغغغغ .2
equations to calculate the pressure معادالتها لحساب مقدار الض و
3. Determine forces acting on submerged plane and تقغغغدير القغغغم المغغغة ري اغغغا السغغغومة المسغغغتمية .3
curved surfaces مالمحدبة الم ممري
4. Understand the concept of buoyancy, stability, ادراك مفهمم ظماهر الوفم ماالستقرار مالتما ن .4
equilibrium and calculate the buoyant force محساب مقدار قمي الوفم
5. Determine pressure distribution for rotating تقغغغميم تم يغغغ مقغغغادير الضغغغ و لةمغغغا اغغغا حالغغغة .5
الدمران
fluids
54
FLUID STATICS 3 الموائع في حالة السكون
Fluid Statics is the branch of fluid mechanics سكون الموائع (األستاتيك) هم ارع ميكانيك المما الذي يعنى
that deals with forces acting within a fluid at اريغغان مب غ.بدراسغغة القغغم المغغة ري اغغا المما غ السغغاكنة
rest. In contrast to fluid flow, shear stresses المما غغغ تنعغغغدم ااهغغغادا القغغغل اغغغا المغغغا لغغغذا ي تفغغغا تغغغ ير
don’t exist in the static fluid and therefore وةى الضغ و م تقتصر التحةي.الة ماة اا الما الساكن
viscosity will have no influence on force analysis. ملهغذا العةغم توبيقغا هندسغية وديغدي. مارتفاع السا ل م ك ااتغ
Consequently, the analysis will only involve .اهمها تقميم القم المة ري اا انا السما ل
pressure, height of the liquid column and liquid
density. Estimation of forces acting on storage
tanks is one of the most important applications
of statics.
P=
F is force, its units N, and A is the area having مقغد. m2 المسغاحة محغداتهاA مN هم القمي محغداتهاF
the unit m2. The value of pressure may change يت ير مقدار الض و من نقوة إلى ا غر اغا المغا لغذا يعغر
from one point to another within the fluid mass : كاآلتاA متوسط الضغط الذي ية ر اا مساحة ص يري
and therefore the mean pressure acting on a
small area A is defined as follows:
P=
As A approaches zero, the pressure acting on مغن الصغفر يصغبه الضغ و موندما تقتغرب قيمغة المسغاحة
a defined point becomes: : المة ر اا نقوة معينة
P = lim )δA→0(
P= (3.1)
55
FLUID STATICS 3 الموائع في حالة السكون
B
δz
A Ps
Px δs
F
δy
C
δx θ
E
D
Py
Fig 3.1 Pressure acting at a point in the fluid الض مو المة ري وةى نقوة معينة اا الما3.3 الشكل
56
FLUID STATICS 3 الموائع في حالة السكون
To maintain equilibrium, the net force due to مإلبقاء حالة التما ن ا ن مامل القم الناامة ون الضغ و اغا
pressure, in each direction, must equal to zero. كغل اتاغا مسغام الصغفر وةمغا ن أن قغم القغل معدممغة بسغبب
Since shear forces do not exist, the two forces : هماx االقمتان المة رتان اا االتاا سكمن الما
acting in the x direction are:
(Px . δy δz ), (- Ps . δy δz sin θ)
Px . δy . δz + (- Ps . δs . δz sin θ( = 0
Also:
: كما أن
Sin θ =
Px . δy δz - Ps . δy δz = 0
Px = Ps (3.2)
In the case of the forces acting in the y direction اهنالغك قغمي ال غة ناامغةy مايما ي ل القم المغة ري باألتاغا
there will be a third force due to gravity (-mg), : ) حيث ان-mg ( ون قل المن مر مقدارها
where:
57
FLUID STATICS 3 الموائع في حالة السكون
Substituting for mass in terms of volume and تصغبه القغميρ م بالتعميض ون الكتةة بداللة الحاغم مالك ااغة
density ρ, the force will be: : مسامية إلى
We have: : م أن
cos θ =
δz, δy, δx are small quantities and therefore هغغا مقغغادير ص غ يري ل غذا يمكغغنδz, δy, δx مالمعةغغمم أن
their value approaches zero. Consequently, the . تقريبها الى الصفر ملهذا يهمل الحد ال الث اا المعادلة او
third term in the above equation becomes : نحصل وةىcos θ مبالتعميض ون
negligible. Substituting for cos θ, we get:
Py . δx δz - Ps . δx δz = 0
Simplifying:
:مبالتبسيو
Py = Ps (3.3)
58
FLUID STATICS 3 الموائع في حالة السكون
It can be noted from equations (3.2) and (3.3): : ) أن3.3 ( ) م3.2 ( مي حظ من المعادلتين
Py = Ps = P x (3.4)
In fact, the volume of the wedge is so small that متادر الم حظة ب ن حام من مر الما ص ير ادان لغذا يمكغن
it can be considered as a point within the mass منسغتنت مغن المعادلغة. اوتبار نقوة ماقعغة اغا المغا السغاكن
of the static fluid. We can therefore note, from ) أن الضغ مو المغغة ري باميغ االتااهغغا وةغغى نقوغغة اغغا3.4(
equation (3.4), that the pressure components مهذا االستنتاج هم قاعدة باسكال.الما الساكن تكمن متسامية
acting at a point within the static fluid are التا تغنل " أن الضغ و يغة ر اغا أي نقوغة اغا المغا السغاكن
equal. This conclusion is actually Pascal’s Law ." باالتااها اميعا
which states “the pressure acting at point in a
fluid at rest is independent of direction”.
P1 = P - [( ) ]
P2 = P + [( ) ]
To maintain equilibrium, the net force acting on ملديمممة حالة التما ن ا ن مامل القم التا تغة ر اغا الاسغيم
the element in the x direction must be zero. . تسامي صفرانx باالتاا
Σ Fx = 0.0
59
FLUID STATICS 3 الموائع في حالة السكون
y
P4
P2
P1
mg
dy
dz
dx
P3
x
Fig 3.2 Pressure acting on a fluid element الض مو المة ري اا اسيم الما2.3 الشكل
60
FLUID STATICS 3 الموائع في حالة السكون
Σ Fx = P1 dydz + (- P2 dydz)
P1 – P2 = 0.0
: P مبالتعميض بداللة
Substituting in terms of P:
-2 ( )=0
=0
=0
This means that the pressure does not change امz مx مهذا يعنا ان مقدار الض و لن يت ير اا االتااهين
in the x and z directions. We can therefore بعباري ا ر ان الض و يتسام بالمقدار وند أي نقوتين تقعان
conclude that the magnitude of pressure is the امغ ا ي حغظ اغا. وةى المستم االاقا نفسغ اغا المغا
same at any two points across a horizontal يسغامي الضغ وS الضغ و المسغةو وةغى النقوغة3.3 ال غكل
plane in the fluid. It is noted in Fig 3.3 that the Q مكغغذلك الض غ و المغغة ر اغغا النقوغغةR المسغغةو وةغغى النقوغغة
pressure acting at S is equal to that at R and . P يسامي الض و المة ر اا النقوة
similarly the pressure at Q is equal to that at P.
61
FLUID STATICS 3 الموائع في حالة السكون
P Q
R S
Regarding the forces in the y direction we need ياب إضااة قمي قغلy مايما ي ل القم المة ري اا االتاا
to add the force due to the weight of the :( إلى قم الض و أي-mg) الاسيم
element (-mg) to the pressure forces, so that:
P3 dx dz – P4 dx dz – mg = 0
: P مبداللة
In terms of P:
(P- ) dx dz - ( P + ) dx dz - mg = 0
Substituting for mass in terms of density ρ and : (dx dy dz( مالحامρ بداللة الك ااةm نعمض ون الكتةة
volume (dx dy dz):
(P- ) dx dz - ( P + ) dx dz - ρ g dx dy dz = 0
62
FLUID STATICS 3 الموائع في حالة السكون
=- ρg
We have shown that the value of P does not ماذا, z مx ال يت يغغغر باالتاغغغاهينP مقغغغد تبغغغين ان مقغغغدار
change in the x and z directions. Now, ااترضغغنا ان مقغغدار الضغ و لغغن يت يغغر مغ الغ من ايضغغا ايمكننغغا
assuming that the pressure does not change صياغة المعادلة التفاضليية الزئئيلة صغياغة معادللة تفاضليية
with time as well, we can convert the partial : كيية
differential equation to a total differential
equation:
=- ρg )3.5(
We can evaluate the actual value of the ) نحصغغل وةغغى مقغغدار الت يغغر الحقيقغغا3.5( مبمكامةغغة المعادلغغة
pressure in the vertical direction by integrating . بالض و اا االتاا العممدي
equation (3.5).
The value of the density of compressible fluids, تعتمغغد ك ااغغة المما غ االنض غ اوية م غغل ال غغا ا وةغغى مقغغدار
such as gases, varies according to temperature ماذا توةغغب االمغغر مكامةغغة المعادلغغة. دراغة الحغغراري مالضغ و
and pressure. Therefore, if we need to integrate أما. ) ل ا معين اياب تحديد و قة بين الك ااة مالض و3.5(
equation (3.5) for a gas, then a relationship اا حالة المما غير االنض اوية م ل السغما ل اك ااتهغا ابتغة
:) وةى الما اآلتا3.5( المقدار لذا نستوي مكامةة المعادلة
between density and pressure will be required.
However, for incompressible fluids, such as
liquids, the integration will be as follows:
∫ =∫
Since is constant, and according to )3.4( م تبعا ن لما هم مبين اا ال كل اب م بما ان
Fig (3.4) the integral gives: : اان نتياة التكامل تصبه
63
FLUID STATICS 3 الموائع في حالة السكون
P2 – P1 = - (y2 – y1)
y2 – y1 = h
P2 – P1 = - h
P1 – P2 = h (3.6)
h y2
1
y1
Fig (3.6) shows that the pressure difference ) امكان ت مين اغر الضغ و3.3( يتبين من المعالة
(P1-P2) can be determined from the value of the : ااذا اعةنا, h ( من معراة ارتفاع وممد السا لP1-P2)
height of liquid column h, now, if:
ΔP = P2 – P1
- ΔP = P1 – P2
- ΔP = h
or ام
h = (3.7)
64
FLUID STATICS 3 الموائع في حالة السكون
the pressure head; defined as the height of a ام يملغد, P ميقصد ب وممد السغا ل الغذي يملغد ضغ وا مقغدار
liquid column required to give a pressure P or [L] مابعادm محداتh ( يرم لP1 – P2) ار ض و
pressure difference (P1 – P2). it is denoted as h : مسنمضه مفهمم وممد وممد الض و اا الم ال اآلتا
and has the units of m and dimensions [L]. The
concept of pressure head will be elucidated in
the following example:
a- A column of water; density 1000 kg/m3 1000 kg/m3 ( أ) وممد ض و من ماء ك اات
Solution
الحل
P0 =101.325 kN/m2 (kPa), ρ H2O = 1000kg/m3
p0
h H 2O =
ρ H 2O g 101.325 x103
= = 10.33 m
1000 x 9.81
65
FLUID STATICS 3 الموائع في حالة السكون
p0 101.325 x 10
3
h Hg = = = 0.760 m
ρ Hg g 13.595 x 1000 x 9.81
Comment مالحظة
The result shows that a column of water يملغغد10.33 m تبغغين النتتياغغة ان ومغغمدا ا مغغن المغغاء ارتفاوغ
10.33 m high creates pressure equal to the ضغ وا ا قغغدر الضغ و الاغغمي بينمغغا يمكغغن الحصغغمل وةغغى نفغغس
atmospheric value, however only 0.760 m of . اقو0.760 m المقدار من وممد ب ارتفاو
mercury will be required to produce the same
pressure.
The pressure measured relative to the يدوى الض و المقيس نسبة إلى الض و الامي الضلغط النسلبي
atmospheric pressure is known as the relative أم تكتغغب كةمغغةg ام ضللغط المايللا م يرم غ ل غ بغغالحر
pressure or gauge pressure. The letter “g” is م يقغرأ المقيغاس وغغادي. ) التغا تعنغا مقيغغاس الضغ وgauge (
normally used to refer to gauge pressure. The ض وا ن نسبيا ن أي ان الصفر الم ب وةي يعادل الض و الامي
pressure gauge typically reads relative pressure; إال ان بعض المقاييس تدرج بحيث تقغرأ ضغ وا ن موةقغا ن بصغمري
that is, the zero mark on the instrument is .مبا ري
equivalent to the atmospheric pressure value.
However, some gauges are calibrated to read
absolute pressure values directly.
66
FLUID STATICS 3 الموائع في حالة السكون
B
135.8 kN/m2(abs) 34.5 kN/m2 (g)
A
60 kN/m2(abs) -41.4 kN/m2 (g)
1 kN/m2 = 1 kPa
It is worth mentioning that the general use of متاغدر اال غغاري إلغغى ان اسغغت دام كةمغة "الضغ و" محغغدها تعنغغا
the term “pressure” refers to gauge pressure. .وادي ض و المقياس
67
FLUID STATICS 3 الموائع في حالة السكون
The pressure below atmospheric is called يسمى الض و الذي يقل ون الض و الامي السا د ضغط الفراغ
vacuum. The value of vacuum will be negative, متكمن قيمت سالبة نسبة الى الض و الامي مممابغة نسغبة إلغى
if measured relative to atmospheric pressure, يتضغغه أن مقغغدار ض غ و3.5 افغغا ال غغكل. الصغغفر الموة غ
and positive if measured relative to the ) الغغذي يعغغادل60 kN/m2abs ( هغغمA الموةغغ اغغا النقوغغة
absolute zero. In fig 3.5 the value of the ) مهذا يعنغى ان مقيغاس-41.4 kN/m2 ( ض وا ن نسبيا مقدار
absolute pressure at A is 60 kN/m2abs. Whilst ماغا. )- 41.4 kN/m2( الضغ و سغيقرأ ضغ و اغرا قغدر
its equivalent value, as relative pressure, is : ن حظ مقدارين لةض و مما يدل وةى انB النقوة
equal to -41.4 kN/m2 vacuum. At B we can also
see the two values of pressure indicating that:
Absolute = Relative (gauge) + Atmospheric الض و الامي+ الض و الموة = الض و النسبا
Water density = 1000kg/m3, g = 9.81 m/s2 917kg/m3 ك ااة النفو1000 kg/m3 ك ااة الماء
Oil density= 917kg/m3, at pressure= 101.3kN/m3 8.91 m/s2 التعايل الااذبا101.3kN/m3 الض و الامي
P0
h2 Oil نفو
P2
h1 P1
Water ماء
68
FLUID STATICS 3 الموائع في حالة السكون
Solution الحل
(a) Fig 3.6 shows that the absolute ان الض و الموة المة ر اغا3.3 (أ) يتضه اا ال كل
pressure acting at the surface of the يسغامي الضغ و الاغمي مضغااا ن اليغP2 وبقة الماء
water layer P2 is equal to the : الض و الناام ون وممد النفو أي
atmospheric pressure plus the pressure
due to the oil column, therefore:
P2 = P0 + h2 oil g
(b) The absolute pressure at the bottom of P1 ان (ب) يحسب الض و الموة الذي ية ر اا قعر ال
the tank is estimated by: : من المعادلة
P1 = P2 + h1 water g
Pg = P1 – P0
69
FLUID STATICS 3 الموائع في حالة السكون
Comment مالحظة
The reading of a pressure gauge fixed at the 33.4 kN/m2 ان ايسقرأ لم ب مقياس ض و اا قعر ال
bottom of the tank will be 33.4 kN/m2
A h
70
FLUID STATICS 3 الموائع في حالة السكون
For example, the pressure at A is due to the ميحسبh من وممد السا لA ام ينام الض و اا النقوة
column of liquid h, and can be calculated using (3.8) من المعادلة
equation (3.8)
PA = h (3.8)
The piezometer is used to measure the pressure يسغغغتعمل البي ممتغغغغر لقيغغغاس ضغغغغ و السغغغما ل اقغغغغو ماليمكغغغغن
of liquids only. It cannot be used for high است دام لقياس ض و وال الن السا ل سيصل اي الى ارتفاع
pressures, because the liquid may rise and .غير ومةا ميتدا من االنبمبة
overflow from the tube.
Pipe line D h
A
B
C
Fluid الما Mercury ب
71
FLUID STATICS 3 الموائع في حالة السكون
Since the pressure at B is equal to that at C C يسغامي الضغ و ونغد النقوغةB لما كان الض و وند النقوغة
thus: : لذا
PB = P0 + h Hg g (3.9)
Where PB refers to the absolute pressure at B ك ااغةHg مB هم الض و الموةغ ونغد النقوغةPB حيث ان
and Hg is the density of mercury. The pressure هغم نفغس الضغ و ونغدC مبما ان الضغ و ونغد النقوغة. ال ب
at C and D has the same value which is equal to الغذي بغدمر يسغامي ضغ و المغا اغا االنبغمب ونغدD النقوة
the pressure of the fluid inside the pipeline at A. اعةي يمكن معراغة مقغدار ضغ و المغا اغا انبغمب أمA النقوة
Thus we can determine the pressure in a . h مواء بمارد قياس ارتفاع ال ب
container or in a pipeline by simply measuring
the height of the mercury column h.
To measure the pressure difference (P1 – P2) ) اغا نقوتغين ماقعغينP1 – P2 ( اذا اردنغا قيغاس اغر الضغ و
across an orifice plate in a pipeline, a وةى اانبا صفيحة مثاوبة تعترض الاريغان اغا انبغمب معغين
manometer is fixed as shown in Fig 3.8. This ميمكغن3.9 ايمكننا ربغو المغانممتر كمغا هغم مبغين اغا ال غكل
arrangement, for measuring pressure by a ايضغغغا ربغغغو المغغغانممتر التبغغغاينا بغغغانبمبين م تةفغغغين ام وبغغغر اي
differential manometer, can be used for two . تضيقة اا االنبمب تسبب هبموا ن اا الض و
pipes or across any restriction in a pipe that يحسب ار الض و بداللة ارتفاع سا ل المغانممتر وةغى النحغم
causes pressure drop. : اآلتا
The pressure difference can be calculated as
follows: Orifice مقياس امها
Fluid A z
h
C D
Fluid B
المانممتر التباينا3.3 الشكل
Fig 3.8 Differential Manometer
72
FLUID STATICS 3 الموائع في حالة السكون
The pressure at C is equal to that at D, thus: : أيD يسامي الض و وند النقوةC الض و وند النقوة
PC = P D
PC = P1 + (z+h) Ag
PD = P2 + h B g+z A g
A is the density of fluid A and B is of B: : اذنB ك ااة الما B مA ها ك ااة الما A
P1 + (z+h) Ag = P2 + h B g+z A g
P1 – P2 = h g ( B – A) (3.10)
If fluid A is gas then we can neglect the pressure اذا كان الما الااري اا االنبمب غغا ا اغيمكن اهمغال الضغ و
due to its weight. This is because the density of ميعمد السببب إلغى كغمن مقغدار. A الناام من قل وم الما
A is small compared to B and therefore موةيغغ ت تصغغرB ك ااغغة ال غغا صغغ يرا مقارنغغة بك ااغغة المغغا
equation 3.10 becomes: : إلى3.13 المعادلة
P1 – P2 = h g B (3.11)
This manometer is used to measure pressure يسغتعمل هغذا المغانممتر لقيغغاس اغر الضغ و بغين انبغغمبين يغغنق
difference between two pipelines carrying the ميمكغغن الغغتحكم3.8 نفغغس المغغا كمغغا هغغم مبغغين اغغا ال غغكل
same fluid; see Fig 3.9. The height of the liquid لةسغغماةA بمسغتم ارتفغاع السغا ل اغغا المغانممتر بفغته الصغمام
column is controlled by opening valve A to مونغدما يهمغل تغ ير قغل. بد مل ام وغرد الهغماء اغم السغا ل
allow for the “in and out” movement of air : وممد الهماء يحسب ار الض و كاآلتا
above the liquid. Ignoring the effect of the
weight of air above the liquid, the pressure
difference can be calculated as follows:
P1 – P2 = h g (3.12)
73
FLUID STATICS 3 الموائع في حالة السكون
)(هةاء Air
) ) صمامValve A
Pipe 2
Pipe 1
P1 P2
Fluid density
)ρ )ما ك اات
P1
P2
Gas x
h
θ
Liquid
74
FLUID STATICS 3 الموائع في حالة السكون
The pressure difference is calculated in terms of : من المعادلة اآلتيةx يحسب ار الض و بداللة
x by the following equation:
P1 – P2 = g h = g x sin θ (3.13)
The mercury rises to a height h above the level اغغم مسغغتما اغغا الحغغمض حيغغثh يت غغذ ال ب غ ارتفاوغا ن قغغدر
in the container balancing the atmospheric م يمكغن اهمغال تغ ير ضغ و ب غار. P0 يعادل الضغ و الاغمي
pressure. The effect of vapour pressure (about ال ب المسةو وةى وممد م البالغ هاء
1.59 x 10-4 kN/m2) above the mercury column is ن ن
) باوتبار مقغدارا صغ يرا مقارنغة1.59 x 10-4 kN/m2 (
small compared to atmospheric pressure : ( لذاP0 = 101.325 kN/m2 ( بالض و الامي
(P0 = 101.325 kN/m2) and therefore can be
ignored, so we can write:
P0 P0
بmercury
75
FLUID STATICS 3 الموائع في حالة السكون
P0 = h Hg g
Substituting for values of g, Hg and P0 we get: نحصل وةىP0 م Hg مg م بالتعميض ون قيم
h = 0.762 m = 76.49 mm
The result shows that the atmospheric pressure م هغغذا يعنغغا ان الض غ و الاغغمي يكغغااا ومغغمد نا بقي غ نا ارتفاو غ
is equivalent to a mercury column of height . وةى ما التقريب0.762 m
equal to about 0.762 m.
A typical Bourdon gauge is shown in Fig 3.12; it مقياس بمردمن المتكمن من انبمب معغدنا3.12 يمضه ال كل
consists of a hollow elastic curved metal tube, منحنغغا أحغغد نهايتي غ م ةقغغة ماأل غغر متصغغةة بغغاالنبمب ام
one end is closed and the other is connected to مونغدما يغد ل المغا. بال ان المراد قيغاس ضغ و المغا ايغ
a pressure source such a pipeline or a container. اغغا االنبغغمب يسغغبب انفتاحغا ن يتناسغغب وغغردا مغ الضغ و ايحغغرك
The pressure, due to the fluid inside the tube, يقغرأ المقيغاس ضغ وا ن نسغبيا ن بسغبب. مة ران يبين مقدار الض و
. ت ير الض و الامي وةى السوه ال اراا ل نبغمب المنحنغا
causes a movement of a pointer indicating the
kN/m2 ميمكن معايري المقيغاس ليقغرأ ضغ مو واليغة بمحغدا
value of the pressure. The movement is due to
أم ليقغغرأ ض غ مو اغغرا بمحغغدا ميةةيمتغغر ب غbar ( امPa)
the straightening of the elastic tube which is
. )mmHg)
proportional to the pressure. The gauge reads
relative pressure due to the effect of
atmospheric pressure on its outer curved
surface. The gauge can be calibrated to read
high pressure values in kN/m2 (Pa) , bar or to
read vacuum in mmHg.
76
FLUID STATICS 3 الموائع في حالة السكون
تدرج المايا
Pointer Scale
مؤشر
bar
انبوب منحني
A
Fig 3.13 3.33 الشكل
b
water ماء
h mercury ب
C D
77
FLUID STATICS 3 الموائع في حالة السكون
Solution الحل
h = 0.7m, (b-a) = 0.3 m, H2O = 1000 kg/m3
The pressure at C is equal to that at D, ايD يسامي الض و وند النقوةC الض و وند النقوة
PC = PD
PC = a H2O g + PA
PD = h Hg g + (b – h) H2O g + PB
a H2O g + PA = h Hg g + (b – h) H2O g + PB
PA – PB = h g ( Hg - H2O) + (b – a) g H2O
Comment مالحظة
The results of Example 3.3 show that equation ان معادلغة حسغاب اغر الضغ و اغا3.3 يتضه من حل الم ال
)3.10) cannot be used for calculating pressure انبغغمب ما غغل ت تةغ ومغغا لغغم كغغان االنبغغمب ااقيغا ن حيغغث تسغغت دم
difference in an inclined pipeline. It is usually ) لذا ينب غا حسغاب اغر الضغ و دا مغا ن وةغى3.13( المعادلة
done by locating two points at a horizontal level تقغ وةغى مسغتمD مC اساس مساماي الضغ و اغا نقوتغين
having the same pressure, such as C and D. . ااقا
Exercise تمرين
If the fluid inside the pipe is changed to oil with اما3.98 لم كان الما الااري اا االنبمب نفوا ك اات النسبية
specific gravity 0.89, what will be the pressure ؟psi بمحداB مA هم مقدار ار الض و بين النقوتين
difference in psi between A and B?
78
FLUID STATICS 3 الموائع في حالة السكون
3.9 Forces acting on flat submerged surfaces الاوى المؤثرة في السطوح المستوية المغمورة3.3
The action of pressure within a static fluid was كنغغا قغغد بينغغا اغغا الفقغغرا السغغابقة تغغا يرا الض غ و اغغا المغغا
explained in the previous sections. We will now السغاكن ماآلن سنمضغه كيغ يغة ر ضغ و المغا اغا سغوه
examine the effect of the fluid pressure on a ام ن تتعرض ادران ال انا إلى ضغ و. مستمي م ممر اي
submerged surface. Good examples are the السغغا ل الغغذي تحمي غ مكغغذلك يتعغغرض اانغغب سغغفينة تسغغير اغغا
البحر إلى ض و الماء ممغا أ غب ذلغك مكغذلك تتعغرض بعغض
influence of the liquid pressure on storage tanks
.السومة لت ير ض و ال ا م ل الوا را ماألبنية العالية
and that of sea water on the sides of a sailing
ship, and so on. Further, some surfaces are
subjected to gas pressure, such as airplanes and
high rise buildings.
If an object is horizontally submerged in a static اذا كان السغوه الم مغمر أاقيغا ن اغا مغا سغاكن اسغية ر الضغ و
fluid, then the pressure will act equally at all بالتسغغامي اغغا امي غ نقاو غ ميعغغمد السغغبب لمقغغمع امي غ نقغغاو
points of the surface. This is because the ملمغا كانغ القغمي. السغوه تحغ تغ ير ومغ متسغام مغن المغا
surface is under the same depth of fluid. Now : تسامي الض و مضرمبا ا اا المساحة أي
since force is equal to pressure multiplied by
area, therefore:
F=∫ = P. A
The above equation can be applied to . ميمكن توبي المعادلة سماء أكان الما سا ن أم غا ا
submerged surfaces regardless whether the أما اذا كان السغوه الم مغمر مغا ن اةغن يكغمن الضغ و متسغاميا
fluid is liquid or gas. It is to be noted that the اغا اميغ نقاوغ ملكغن اغا حالغة غمغر السغوه اغا غغا يمكغن
pressure values over a submerged inclined ااتراض بم الض و وةى السوه ب كمة مذلك لضآل الت يغر
surface will not be uniform. However, for متحسغب. الحاصل اي م ت ير وم وبقة ال غا اغم السغوه
objects immersed in gas, the pressure can be : القمي المة ري اا السوه الم ممر بمماب المعادلة الآلتية
assumed constant over the whole surface. This
is because the pressure changes, resulting from
variation in depth of the gas layer, are very
small. The following equation can be applied to
calculate the force acting on the submerged
surface:
F = ∫A P dA
79
FLUID STATICS 3 الموائع في حالة السكون
We will now derive an equation to calculate the سن غغغت اآلن معادلغغغة لحسغغغاب القغغغمي المغغغة ري اغغغا سغغغوه ما غغغل
force acting on an inclined surface submerged م ممرA سوه مساحت3.14 افا ال كل. م ممر اا السا ل
in a liquid. Fig 3.14 shows a surface area equal كمغا يظهغر اغا ال غكلθ اغا سغا ل ك ااتغ مما غل ب اميغة
to A inclined at an angle θ submerged in a liquid تعوغغغى القغغغمي المغغغة ري اغغغا المسغغغاحة. مسغغغقو رأسغغغا لةسغغغوه
having density . The figure also shows a ون سوه السغا ل متقغy التا تبعد مسااةdA متناهية الص ر
vertical view for the surface. The force acting on : من المعادلةh بعم
an infinitesimal area dA, which is at a distance y
from the liquid surface and at a depth h, is
expressed as:
dF = P dA
dF = h g . dA
Integrating the equation gives the resultant مبمكامةغغة المعادلغغة تنغغت الاللوة المحصللية المغغة ري اغغا السغغوه
force acting on the submerged surface: : الم ممر
F = ∫A h g dA
h = y sin θ
F= g sin θ ∫A y dA
dA
O
θ
مرك المساحة
h
h1
Centroid
y
مرك الض و
y1 Centre of pressure
Q
y2
Fig 3.14 Submerged inclined surface سوه ما ل م ممر اا السا ل3.33 الشكل
80
FLUID STATICS 3 الموائع في حالة السكون
The integral ∫y dA is the first moment of area ∫ التكامغل المكغااا لعلئ المسلاحة االولy dA يم غل المقغدار
for the submerged surface around the x axis, ( مO - Q ) المبغين بغال وx لةسغوه الم مغمر حغمل المحغمر
shown as (O – Q). The value of the moment is هغا المسغااة بغين مركلئ المسلاحةy1 ( حيغثy1 A) قيمتغ
(y1A), where y1 is the distance between the الذي يتقاو م سوه السا ل اغا النقوغةx الم ممري مالمحمر
centroid and the x axis intersecting the liquid : موةي تصبه القمي المحصةةO
surface at O. Thus the resultant force will be:
F = g sin θ y1A
F = ( gh1) A = Pc . A (3.15)
In this case we considered Pc as the pressure هم وم مركh1 هم الض و المة ر اا مرك المساحة مPc
acting on the centroid, and h1 as the depth of . )Pc = h1g المساحة من السوه
the centroid (Pc = h1g .
Since the pressure increases with depth, the ملمغغا كغغان الضغ و يغ داد وغغردان مغ العمغ لغغذا اغ ن نقوغغة تغ ير
resultant force will act at a point below the القغغمي المحصغغةة سغغت ح إلغغى نقوغغة تقغ أسغغفل مركغ المسغغاحة
centroid known as the centre of pressure. The بغينy2 حيث تسمى ناطة مركئ الضغط ميمكن حساب المسغااة
distance y, between this point and the line OQ, . OQ بات اذ عئ الاوة حمل المحغمرOQ هذ النقوة مال و
can be calculated by taking moments of force : سنحصل وةىdM ااذا رم نا إلى و م القمي
around the axis OQ. If the moment of force is
denoted by dM then:
dM = dF . y
dF = P . dA
dM = P dA y
The moment of the distributed pressure force, مبمكامةة المعادلة نحصل وةى مامل و مم القم الناامة وغن
with respect to the axis OQ, can be determined مالتغا بغدمرها تسغامي وغ م القغميOQ الض و حمل المحغمر
by integrating the above equation. Since this المحصةة حمل نفغس المحغمر ملمغا كغان وغ م القغمي المحصغةة
moment is equal to the moment of the : ) اذنF.y2( يسامي
resultant force, having value of (F.y2), therefore:
81
FLUID STATICS 3 الموائع في حالة السكون
F.y2 = ∫A y P dA
P=h g
F y2 = g ∫A y h dA
h = y sin θ
F y2 = g sin θ ∫A y2 dA
The integral (∫A y2 dA) is known as the moment ∫) و م قصمر المساحة حمل المحمرA y2 dA ( يم ل التكامل
of area with respect to the axis OQ, denoted I0. . ميسغغمى أيض غا ن عللئ الاصللور ا لللتاتيI0 يرم غ ل غOQ
It is also called moment of inertia. Substituting : ) انحصل وةى3.15 ) من المعادلةF نعمض ون القمي
the force F from equation (3.15) we get:
gh1 A y2 = g sin θ I0
I0 sin θ
y2 = h1 A
h1 = y1 sin θ
y2 = (3.16)
The moment of inertia I0, with respect to an حغمل محغمر م تغار إلغى وغ مI0 يمكن تحميغل وغ م القصغمر
axis, can be converted to moment of inertia باست دامI0c القصمر حمل المحمر الذي يمر بمرك المساحة
with respect to the centroid I0c by the parallel : حيث نظرية المحور الموائ
axis theorem, where:
I0 = I0c + A
y2 = +
82
FLUID STATICS 3 الموائع في حالة السكون
y2 = + y1 (3.17)
Table 3.1 shows values of moments of inertia يحسغغب و غ م القصغغمر الغغذاتا لغغبعض كي غ3.1 يبغغين الاغغدمل
for some common shapes. اال كال الهندسية
c
bc3/12 b.c
O Q
b c/2
h h
bh3/36 b.h/2 O
Q
h/3
πr4/4 πr2 O r Q
0.1102 r4 πr2/2 O Q
4 r/π
4 r/3π
Table 3.1 Moments of Inertia around the centroid و م القصمر الذاتا حمل محمر بمرك المساحة3.3 الزدول
83
FLUID STATICS 3 الموائع في حالة السكون
We can now apply equation (3.15) to calculate نستوي االن حساب مقغدار القغمي المحصغةة الناامغة وغن ضغ و
the resultant force due to liquid pressure P. The اذ تة ر هذ القمي باتاغا. )3.15( باست دام المعادلةP السا ل
resultant force acts vertically on the submerged ومغغمدي وةغغى السغغوه الم مغغمر اغغا نقوغغة مرك غ الض غ و التغغا
surface at the centre of pressure, which can be . ) 3.13( يمكن تعين ممقعها من المعادلة
located by equation )3.17(.
Solution الحل
y2 y1
2 m
F
1 m
F = g h1 A
h1 = y1
84
FLUID STATICS 3 الموائع في حالة السكون
y1 = 2 + 0.5 = 2.5 m
F = 19.26 kN
y2 = + y1
We have y1 = 2.5 m; the moment of inertia for a منسغت رج وغ م القصغمر2.5m معةمم مهغم يسغاميy1 لدينا
circle is found from table 3.5, it is: : مهم3.1 الذاتا لةدا ري من الادمل
y2 = + 2.5
y2 = 2.525 m
Comment مالحظة
The centre of pressure is located 0.025 m below أسغفل نقوغة مركغ مسغاحة0.025m تق نقوة تغ ير الضغ و
the centroid of the circular cover. . ال واء دا ري ال كل
Exercise تمرين
Determine the centre of pressure if the above اذا كان كل غواء الفتحة اا الم ال او نص دا ري مكغان
tank was filled with oil of specific gravity 0.897 ا ين تق نقوة تغ ير3.983 ال ان يحتمي نفوا ن ك اات النسبية
and the cover plate is semicircle instead of a القمي ؟
circle.
85
FLUID STATICS 3 الموائع في حالة السكون
3m
0.5 m
2 F
P = 88 kN/m
1.5 m
2m
600
Fig 3.16
3.33 الشكل
الحل
Solution
The force is determined by equation 3.15 3.15 تعوى القمي من المعادلة
F = g h1 A
h1 is the height of the water column above the هم ارتفاع وممد الماء ام مرك مساحة البمابة ملما كانh1
centroid of the gate. Since the pressure is h الض و معةمم المقغدار اذن نسغتوي حسغاب ارتفغاع ال غ ان
known, we can calculate the height of the tank : وةى النحم اآلتا
h as follows:
P=h g
h = P/ g
86
FLUID STATICS 3 الموائع في حالة السكون
h = 8.97 m
The vertical distance between the centroid of ان هم البعد ال اقملا بين مرك مساحة البمابة مقاودي ال
the gate and the bottom of the tank is
h1 = h – 2.65
F = 46499.4 N = 46.499 kN
87
FLUID STATICS 3 الموائع في حالة السكون
O O O
1.1 m 2.7 m
y2 B y1 H J
B D
y 1.5 m G G
G
G
C
G
F E G
F
1.2 m
Solution الحل
We use equation (3.17) to calculate the ) 3.13 ( من المعادلةF نحسب القمي المحصةة
resultant force
F = g h1 A
y1 = OB + y
88
FLUID STATICS 3 الموائع في حالة السكون
To determine y, which is the location of the مالياغغاد ن غغذ و غ مم حغغمل G مركغغ المسغغاحةy يم غغل
centroid G, we take moments with respect to : كاآلتاBD المحمر
the axis BD:
Moment of the two areas BHE and FJD + the A . y = EFJH و م المساحة+ FJD مBHE و م المساحتين
moment of the area EFJH = A. y
A is the area of the gate which is equal to the ها مساحة البمابة التا تسامي مامغمع مسغاحتا الم ة غينA
sum of the two triangular areas and the : ممساحة المستويل أي
rectangular area:
(Area of the two triangles x centroid of each) + ( مسغغغاحة+ ) ( مركغغغ مسغغغاحتيهماx ) ( مسغغغاحة الم ة غغغين
(area of the rectangle x its centroid) = A . y A . y = ) ( مرك مساحتx ) المستويل
The centroid of the triangle is located at rd of م لمغغا كغغان مرك غ مسغغاحة الم ةغغث يق غ وةغغى بعغغد يسغغامي ةغغث
its height, thus ارتفاو أي
1.5 x = 0.5 m
The centroid of the rectangle is located at of أي ومل ممرك مساحة المستويل يق اا منتص
1.5 x = 0.75 m
Substituting:
: م بالتعميض
2.925 . y = (1.2 x 1.5 x 0.75) + (2 x 0.5625 x 0.5)
y = 0.654 m
e can now calcu
y1 = y + OB
89
FLUID STATICS 3 الموائع في حالة السكون
We will now calculate the resultant force: : اآلن نحسب القمي المحصةة
y2 , the location of centre of pressure C is 3.13 من المعادلةy2 نحسبC اليااد ممق مرك الض و
determined by equation 3.1
y2 = + y1
Summing up the moment of inertial of the area هغغغم وغغغ م قصغغغمر المسغغغاحةI0c
حغغغمل ال غغغو المغغغارEFJH
EFJH, with respect to the axis passing through DFJ مBEH مضااا ن إلي و م قصمر المساحتينG بالمرك
G, and the moments of inertia for the two areas : 3.1 حمل نفس ال و مباالستفادي من الادمل
BEH and DFJ will result in I0c; using table 3.1 we
have:
I0c = 2 x [(0.75 x 1.53)/36] + [(1.2 x 1.53)/12]
I0c = 0.478 m4
y2 = + 1.754
y2 = 1.847 m
BC = y2 – OB
The moment with respect to the hinge is equal BC الع م حمل المفصل يسامي القمي المحصةة مضرمبة بالبعد
to the resultant force multiplied by BC,
: اذن الع م الموةمب هم
therefore the required moment will be:
Exercise تمرين
If the upper edge is subjected to 1.3 m of water, مغن المغاء احسغب1.3 m اذا كان الحااة العةيا تق تح ومغ
repeat the calculations to find the moment. . مقدار الع م
= 1000 kg/m3
w
(Use Excel)
90
FLUID STATICS 3 الموائع في حالة السكون
P=
A
y
2/3 H
Liquid H F
سا ل
R
B C
91
FLUID STATICS 3 الموائع في حالة السكون
If the liquid surface is open to the atmosphere ان تعرض سغوه السغا ل لةضغ و الاغمي ياعغل مقغدار الضغ و
then the gauge pressure at A will be zero. As مسغغام الصغغفر ميغغ داد وغغردا ا با ديغغغادA النسغغبا ونغغد النقوغغة
the depth of liquid increases, the pressure will يسغغاميy م غ ن يصغغبه مقغغدار الض غ و اغغا العم غ, العم غ
also increase linearly. For example, the value of موةيغ يمكغن تم يغل. ( gH) يسغاميH ( ماغا العمغgy)
the pressure at depth y is equal to ( gy) and at الذي تسغامي مسغاحتABC بالم ةثy بالعمP و قة الض و
depth H equal to ( gH). Thus, the pressure P at : حاصل ضرب نص قاودت اا ارتفاو أم بداللة الض و
liquid depth y will have a triangular relationship
indicated by ABC. The area of the triangle is half
the base multiplied by the height, and in terms
of pressure it will be:
PxH
And: : مان
P= gH
Hence the area of the triangle will be: : اذن تصبه مساحة الم ةث
g H (N/m2)) x H (m)
This expression is actually force per unit width, ممغغن الماضغغه ان هغغذا المقغغدار هغغم قغغمي لمحغغدي العغغرض ماذا
and if we plot a diagram for the whole wall we رسمنا م ووا لةادار باكمة اسنحصل وةى منشلور كمغا مبغين
will get a prism, as seen in Fig 3.19; the volume : ميسامي حام المن مر اا هذ الحالة3.18 اا ال كل
will be:
2
[H (m) x b (m) x gH (Pa or N/m )]
92
FLUID STATICS 3 الموائع في حالة السكون
The resultant force per unit width (F/b) acts ) اا مركغ الضغ وF/b ( تة ر القمي المحصةة لمحدي العرض
through the centre of pressure. It is located at اغاR الذي يتم ل بمرك مساحة م وو الضغ و أي النقوغة
the centroid of the pressure prism, that is at R : ( اذن التا تق بعم3.19 كل ال
in Fig 3.18, which is at a depth of ( ) , Thus:
F/b = ( g H2)/2
A=Hxb
F = g ( H) (H x b)
F/b = g
For a submerged inclined surface, a pressure امغغا إذا كغغان الاسغغم الم مغغمر مغغا ن ب اميغغة معينغغة ايمكغغنن رسغغم
diagram can be plotted at right angle to the م وو ض و وممديا ن وةى سوح الم ممر كما مبين اا ال كل
3.23
surface as illustrated in Fig 3.20
Liquid
Submerged surface
سا ل
السوه الم ممر
93
FLUID STATICS 3 الموائع في حالة السكون
The pressure diagram is plotted as a straight يرسغغم م وغغو الضغغ و وممديغغغا ن وةغغى السغغوه الم مغغمر ك غغغو
line, starting at A, which is the intersection مسغغتقيم يبغغدأ مغغن نقوغغة تقغغاو سغغوه السغغا ل م غ امتغغداد السغغوه
point of the liquid surface with the projection of مينتهغغا بنقوغغة تقاوع غ م غ ال غغو العمغغمدي وةغغىA الم مغغمر
the submerged surface, and ending at B. The إلغىA حيث يترامة مقدار الض و من الصغفر ونغدB السوه
pressure value ranges from zero at A to ( g H) كمغا تتم غل القغمي المحصغةة لمحغدي. B ( ونغد النقوغةg H)
at B. The resultant force per unit width is بغدالن مغن مسغاحةDEBC ( بالمسغاحة المة غريF/b) العرض
represented by the trapezoidal area DEBC, DEBC متغة ر هغذ القغمي اغا مركغ المسغاحة. ABC الم ةث
instead of the triangle ABC. This force acts at . R اا النقوة
the centroid of the area DEBC indicated as R.
Solution الحل
(a) The pressure diagram is shown below (أ) م وو الض و مبين اا أدنا
1m
94
FLUID STATICS 3 الموائع في حالة السكون
(b) The resultant force per unit width (F/b) ( يسغغغاميF/b) (ب) مقغغغدار القغغغمي المحصغغغةة لمحغغغدي العغغغرض
is given by the shaded area (AEDC), ( مهغغغا تسغغغامي مسغغغاحةAEDC) المسغغغاحة المة غغغري
which is equal to the area of the . (BDC) ا غغدان مسغغاحة الم ةغغث (AEDB( المسغتويل
rectangle (AEDB) plus the area of the ( أيg x AH) ضغ وا ن مقغدارAC يم غل ال غو
triangle (BDC). The line AC represents ضغ وا ن مقغدارAB ( كمغا يم غل ال غوg x5m)
pressure whose value is ( g x AH) and موةي يصبه ال وED ( الن يسامي ال وg x1m)
AB = ED represents ( g x1m), thus BC : يم ل ض وا ن مقدارBC
will be:
5 g- g=4 g
The resultant force due to the total area will be القمي المحصةة من مامل المساحتين ها
F/b = 4 g + (4 g ) x 4
ملما كان
Since:
B = 2m
Therefore: B = 2m : اذن
= (4 x 103 x 9.81) + ( x 4 x 103 x 9.81 x 4)
F = 235440 N
95
FLUID STATICS 3 الموائع في حالة السكون
y = 2.44 m
A side view for a submerged curved surface لسغغغوه محغغغدبAB مقواوغغغا ن اانبيغغغا ا3.22 يبغغغين ال غغغكل
AB in a liquid, including the force F, its F م مغغغمر اغغغ ا سغغغا ل مغغغا ميتضغغغه ايغغغ القغغغمي المحصغغغةة
horizontal component FR and vertical . FV مالرأسيةFR ممركبتيها األاقية
component FV are shown in Fig 3.22.
FV F
Fig 3.22 Forces acting on a submerged القم المة ري اا سوه محدب م ممر3.22 الشكل
curved surface
96
FLUID STATICS 3 الموائع في حالة السكون
EA is a vertical plane surface passing through A, and كمغا انA هغم سغوه مسغتم يمغر رأسغيا ن بالنقوغةEA
BC is a horizontal plane surface passing through B. It مي حغغظ أن. B هغغم سغغوه مسغغتم يمغغر أاقي غا ن بالنقوغغةBC
can be noticed that AC is the vertical projection for وةغغغىAB هغغغم اغغغا الماقغغغ مسلللاط ر سلللي لةسغغغوهAC
AB at the plane EA. Since the element ABC is at
مسغتقر اغاABC م بمغا ان اسغيم المغا, EA المسغتمي
equilibrium, the force FH must be equal to the
مسغامية لةقغميFH حالة تغما ن لغذا ياغب ان تكغمن القغمي
force F , which is acting on the projection of AB ماأل يري ها القمي المة ري اا مسغقو السغوهF
the surface AB at the plane EA. In order to مالبقغاء حالغة التغما ن ياغب. EA الماقغ وةغى المسغتمي
maintain equilibrium, the two forces FH and F وةغغى امتغغداد غغوF مFH ايض غا ن ان تعمغغل القمتغغان
must act along the same straight line. مبنغاء وةغى ذلغك يمكغن القغمل أن المركبغة. مسغتقيم ماحغد
Accordingly, the horizontal component of the االاقيغغة لةقغغمي تسغغامي القغغمي العامةغغة وةغغى مسغغقو السغغوه
force is equal to the force acting on the vertical . الرأسا التا تة ر اا نقوة مرك الضغ و لغذلك المسغقو
surface projection at the centre of pressure of امغا المركبللة الر سللية اهغا ناتاغغة وغغن قغل السغغا ل المحغغدد
the projected plane. The vertical component is إلغغىG التغغا تغغة ر اغغا مرك غ ال قغغلABDEC بالمسغغاحة
due to the weight of the element, bound by the . االسفل
area ABDEC, acting downwards at the centre of
gravity G.
Fig 3.23 shows a curved surface AB subjected to معغرض إلغىAB سغوه محغدب3.23 يتضغه اغا ال غكل
hydrostatic pressure on the outside. . ض و السا ل من ال ارج
97
FLUID STATICS 3 الموائع في حالة السكون
In this case, the vertical component of the تسغامي قغل كتةغةFG مهنا تصبه المركبة الرأسية لةقغمي
force FG is equal to the weight of the liquid مهغغا تعمغغل إلغغىEABD السغغا ل التغغا قغغد تم غ الماغغال
that may fill the space EABD. Its direction of .G األوةى باتاا مرك ال قل
action is upwards, toward the centre of
: يمكن حساب القمي المحصةة من المعادلة اآلتية
gravity G. The force is determined by:
F= F F (3.18)
If the curved surface is shaped as a circular ماا حالة كمن السوه المحدب قوساً دائر ال كل اغالقمي
arc, the resultant force will then act المحصغغةة سغغتعمل باتاغغا مركغغ االنحنغغاء كمغغا مبغغين اغغا
towards the centre of the circle as shown in . 3.24 ال كل
Fig 3.24.
F
3.23 الشكل
Fig 3.24
98
FLUID STATICS 3 الموائع في حالة السكون
Solution الحل
r = 6m
3.23 الشكل
Fig 3.25
h = 2 x r sin 30
h = 2 x 6 x sin 60
h=6m
The horizontal component is then )3.15( غغم نحسغغب المركبغغة االاقيغغة باسغغت دام المعادلغغة
calculated by applying equation )3.15(: : التا تصبه
99
FLUID STATICS 3 الموائع في حالة السكون
FH = g h ( ) b
b is the width of the gate and therefore the : لذا تصبه القمي لمحدي العرض, هم ورض البمابةb
force per unit width will be:
FH/b = g
The vertical component (FV/b) is equal to ( اهغغغا تسغغغامي قغغغل المغغغاءFV/b) امغغغا المركبغغغة الرأسغغغية
the weight of the displaced liquid within PSQ الم اة اا الماال
PSQ
F= F F
(F/b) = √ 3
3 3
100
FLUID STATICS 3 الموائع في حالة السكون
Comment مالحظة
The force will act toward the centre of the بما ان السوه وةى كل قمس دا ري لغذا سغتعمل القغمي
circle because the gate is arc-shaped. . باتاا المرك
Fig 3.26 Forces acting on a submerged body المة ري اا الاسم الم ممر القم3.23 الشكل
101
FLUID STATICS 3 الموائع في حالة السكون
It is shown in Fig 3.26 that the force FV2 is equal تسغامي قغل كتةغة السغا لFV2 ان القمي3.23 يتضه اا ال كل
to the weight of the liquid mass above the ام السوه العةمي لةاسم الوغااا مأنAGHCB اا الماال
floating body within AGHCB. However, the force تسامي قل كتةة الما التا يمكن أن ت ل الماالFV1 القمي
FV1 is equal to the weight of the liquid mass that اا حالة ودم مامد الاسغم الم مغمر موةيغ تصغبهADCHG
would occupy the volume bound by ADCHG, أم بعبغغاري انيغغة أن القغغميFv2 ناقصغا نFV1 القغغمي الدااعغغة تسغغامي
when the immersed body is removed. The up . الدااعغة تسغامي قغل المغا الغذي ي يحغ الاسغم الم مغمر
thrust force will then equal to FV1 minus FV2. In تعمل القمي الدااعة الى االوةى باتاا مرك قل الما المغ اة
other words, the up thrust force is equal to the م تاغغدر اإل غغاري إلغغى ان هغغذا. الغغذي يسغغمى مركللئ الطفللو
weight of the fluid displaced by the submerged االستنتاج هم اا الماق موغاب لااعلدة رخميلد التغا تغنل
body. The direction of the up thrust force is وةغى أن قغغمي الوفغم تسغغامي قغل المغغا المغ اة بماسغغوة الاسغغم
toward the centre of the displaced liquid, . مها تعمل اقمليا الى االوةى,الم ممر ا يا ام كةيا
known as the center of buoyancy. This result is
referred to as Archimedes’ principle, which
states that the buoyancy force has a magnitude
equal to the weight of the fluid displaced, by a
partially or fully immersed body, and is directed
vertically upward.
102
FLUID STATICS 3 الموائع في حالة السكون
Wt = m g
F= l gV
Wt = m g
F= l gV
F = Wt
l gV=mg
Or: أم
V= (3.20)
Equilibrium of a floating body can either be يمكن أن يكمن تما ن الاسم الوااا مستقرأ أم غير مسغتقر م
stable or unstable. Stability is achieved when التوائن المستار هم ابقاء الاسم اب بممقع أم ان يعمد إلى
the body is displaced, it returns to the same . ممقع األبتدا ا بعد امالت
equilibrium position.
103
FLUID STATICS 3 الموائع في حالة السكون
Stability depends on the positioning of the تعتمغغد حالغغة االسغغتقرار وةغغى ممق غ مرك قغغل الاسغغم نسغغبة إلغغى
. المغغ اة المسغغمى مركللئ الطفللو ممق غ مركغغ قغغل المغغا
centre of gravity of the body relative to the
ن
مB اعندما يكمن الاسم م ممرا اا ما معين تبقى النقوتان
centre of gravity of the displaced liquid, known
, اا ممق اب نسبة إلى الاسم سماء أكان ما ن ام وممديا نG
as centre of buoyancy. The two centre points B
. 3.29 انظر ال كل
and G will remain in the same position, relative
to the submerged body, regardless of whether
the body is inclined or vertical, see Fig 3.28.
(b)
(a)
استقرار االاسام الم ممري3.23 الشكل
Fig 3.28 Stability of submerged bodies
( حالة االستقرارb) ) حالة ودم االستقرارa(
(a) Stable state (b) unstable state
It is noted in Fig 3.28 that tilting the body at an ون ممقغθ الاسم ب امية ان انحرا3.29 ي حظ اا ال كل
angle θ relative to equilibrium position will θ مهغذ. (W x BG x tan θ) التما ن يسغبب و مغا ن مقغدار
generate a moment equal to (W x BG x tan θ). ( ميصغبه مقغدارtan θ = 0) ها امية صغ يري اغيمكن أوتبغار
Since the angle θ is small, then (tan θ =0), يقغ أسغفلG اغاذا كغان مركغ ال قغل. (W x BG x θ) العغ م
consequently, the moment magnitude will مرك غ الوفغغم اغغالع م هغغم عللئ تاللوي الغغذي يعمغغل وةغغى إوغغادي
become (W x BG x θ). Now, if the centre of . (a) 3.29 الاسم إلى حالة التما ن انظر ال كل
gravity G falls below the buoyancy centre then
the moment will be a righting moment acting
to return the body to equilibrium position, see
Fig 3.8 (a).
104
FLUID STATICS 3 الموائع في حالة السكون
However, if the centre of gravity falls above the أما اذا كان مرك قل الاسم يق أوةى مرك الوفغم اغالع م هغم
centre of buoyancy, then the moment is an )b) 3.29 عئ تدوير م يصبه الاسم غير مستقر انظر ال كل
overturning moment causing instability, see Fig
3.28 (b).
Fig 3.29 (a) shows a floating body in a stable ) اسما ن وا ما ن اا حالة الغما ن ميتضغهa( 3.28 يبين ال كل
equilibrium position. It can be noted that the تسغاميWt أن قمي قل الاسم التا تعمل وند نقوة مرك ال قل
force due to the weight of the body, acting at مي حغغظ ان.B التغا تعمغغل ونغد مركغ الوفغمF القغمي الدااعغغة
the centre of gravity Wt, is equal to the up القغغمتين تعم غ ن باتاغغاهين متعاكسغغين ملكنهمغغا وةغغى أمتغغداد غغو
thrust force F acting at the centre of buoyancy .مستقيم ماحد
B. The two forces act in opposite directions but
along the same line.
(a)
(a)
(b)
(a)
(c) (d)
Fig 3.29 Stable and unstable equilibria (المستقر م التما ن غير المستقرa) التما ن3.23 الشكل
(a)
105
FLUID STATICS 3 الموائع في حالة السكون
If the floating body is tilted to an angle θ, as كمغغغغا هغغغغم مبغغغغين اغغغغا θ مونغغغغد إمالغغغغ الاسغغغغم ب اميغغغغة
shown in Fig 3.29 (b), the force Wt, will act at G. حيثG تة ر وند النقوةWt ) تبقى القميb( 3.28 ال كل
The displaced volume of fluid will remain يبقى مقدار حام الما الم اة دمن ت ير بسبب مساماي القغمتين
unchanged because F and Wt are equal in بينما يت ير كل الما الم اة اي حغ مرك الوفغمF مWt
magnitude. However, the shape of the . (Wt θ) ممن ذلك ينت و م مقغدارB1 إلىB من النقوة
displaced liquid will change, and therefore the الةتغغين اصغغبحتا اآلن تعم غ نF مWt متاغغدر م حظغغة القغغمتين
centre of buoyancy will shift from B to B1 مأن هذا الع م هم اا الماق وغ م. وةى امتداد وين م تةفين
developing the moment (Wt θ). It can be noted موغغغغ م تغغغغدمير اغغغغا ال غغغغكل, )b( 3.28 تقغغغغميم اغغغغا ال غغغغكل
now, that each of the forces F and Wt has a M ميعتمد أستقرار الاسغم هنغا وةغى ممقغ النقوغة. )d( 3.28
different direction. Fig 3.29 shows that the التغا تسغمى المركلئ البينلي لةاسغم الوغااا مهغا نقوغة تقغاو
moment developed in (b) is, in fact, a righting مال و المار بمركغ الوفمالاديغدG مB ال و المار بالنقوتين
moment, whilst that in (d) is an overturning األرتفلا البينلي اغاذا كانغMG ميوة وةغى المسغااة. B1
moment. The stability of the floating body سيبقى الاسم مستقر مينت و مG تق ام النقوةM النقوة
depends on the positioning of the point M مماب غا ن أمغغا اذا حف غMG ( م يعغغدWt x ) تقغغميم مقغغدار
known as the metacentre; which is the اسيفقد الاسم تما نغ المسغتقر مG إلى أسفل النقوةM النقوة
intersection of the line passing through G and B ( الغذي يسغبب انقغ ب الاسغمWt x ) ينت و م تغدمير مقغدار
with the line passing through B1. MG is known G ماا حالة تواب النقوتغين. اا هذ الحالة سالبا نMG ميعد
as the metacentre height. If M falls above G, . ايسكمن الاسم اا حالة التوائن المتعادلM م
MG will be positive and the body will be stable.
The resulting righting moment has a magnitude Dubai
(Wt x). However, if M is shifted to be below G
then MG will be negative. The body will lose its
stability and the resulting overturning moment
(Wt x) will cause the body to overturn. If M falls
on G then the body will be in a state known as
neutral equilibrium.
The metacenter M can be specified, for a boat ونغد مغي ن قغارب مغ نM يمكن تحديغد ممقغ المركغ البينغا
tilted at a small angle θ, by equating the V مغن مسغغاماي وغ م حاغم السغا ل المغ اةθ ب اميغة صغ يري
moment of the displaced volume V with respect بع غ م حاغغم المسغغاحتين المة غغرتين انظغغرB حغغمل النقوغغة
to B, to the moment of the shaded triangular مي حظ أن و م حام الماء الم اة هغم3.33 ال كل
areas. See Fig 3.30. Here, the moment of the ( مالع م الناام ون حركة من مر السا ل همV x (BB1))
displaced water is (V x (BB1)), and the moment
resulting from movement of the liquid prism is
(∫ θ )
106
FLUID STATICS 3 الموائع في حالة السكون
Assuming θ to be a very small angle, therefore: : ص يري ادان لذاθ مبااتراض ان ال امية
x tan θ = θ
h r ∫ θ )
Equating moments gives: :م بمسامي الع مم نحصل وةى
V (BB1) = (∫ θ
V (BB1) = θ ∫A x2dA
مسقو ااقا
Horizontal section
at water level
Fig 3.30 Stability of the boat in water استقرار القارب اا الماء3.33 الشكل
(∫A x2dA ) is clearly the moment of inertia Ic. . Ic ∫ ) هم و م القصمر الذاتاA x2dA ) ممن الماضه أن
Thus: : أذن
θ
BB1 = (3.21)
BB1 = MB tan θ ≈ MB θ
:مبالتعميض نحصل وةى
Substituting BB1 in equation (3.21):
BB1 = MB tan θ ≈ MB θ
107
FLUID STATICS 3 الموائع في حالة السكون
MB = (3.21 A)
MG = - GB (3.22)
If a boat is tilted at small angle, we can locate بحساب األرتفاعM مهكذا نستوي تحديد ممق المرك البينا
the metacentre M by applying the above متاغغدر. ونغغد مغغي ن القغغارب ب اميغغة ص غ يريMG البينغغا
equation to estimate the metacentre height يسغاود وةغى إسغتقرارM مG اإل غاري إلغى أن تباوغد النقوتغين
MG. It is worth noting that the stability of the : الاسم لذا يمكن القمل
body is enhanced by increasing the distance
between the points M and G, therefore:
: إذا كان
If we have:
> GB
< GB
108
FLUID STATICS 3 الموائع في حالة السكون
Solution الحل
(a) Determination of MG shown in Fig 3.30 3.33 المبين اا ال كلMG (أ) حساب االرتفاع البينا
We calculate the centre of gravity of the نسبة إلى ممق مركغ الوفغمG نحسب ممق مرك قل القارب
boat G relative to the buoyancy centre B, y مالياغاد نحسغب ومغ المغاء المغ اة.GB أي البعغدB
this will be the distance GB. The depth of : لتحديد ممق النقوة
water y is first determined as follows:
Mass of displaced water = Density x volume حام الماء الم اةx كتةة الماء الم اة = ك ااة الماء
y = 1.7 m
Therefore the centre of buoyancy will be at: :أذن ممق مرك الوفم هم
= = 0.85 m
The centre of gravity will be at: :قل القارب اآلتا م يصبه ممق مرك
GB = 0.85 + 0.5 = 1.35 m
Then we calculate MG using equation (3.22): :)3.22( باست دام المعادلةMG م نحسب
109
FLUID STATICS 3 الموائع في حالة السكون
MG = - GB (Equation 3.22)
The moment of inertia for a rectangular shape : 3.1 نماد و م القصمر الذاتا لةمستويل من الادمل
is determined from table 3.1:
MG = – 1.35
MG = 3.55 m
Righting moment = Force (F ) x ( BB1) )F( القمي المة ري وةى القاربx )BB1( = و م التقميم
But the force F is equal to the weight of the , تسامي قل القاربF ملكن القمي الدااعة
boat,
F = Wt = mg
The upward force = mass of displaced liquid x g g التعايل الااذباx القمي الدااعة = كتةة السا ل الم اة
بما أن
Since
Ic /V = 4.9
110
FLUID STATICS 3 الموائع في حالة السكون
Therefore: : اذن
BB1 = 0.864 m
Comment مالحظة
If equation 3.21 is used without changing θ to ) tan θ( الغىθ ( بغدمن ت يغر3.21) اذا اسغت دم المعادلغة
tan θ, then the units of the angle should be . (θ rad) ) إلىθ3( اينب ا تحميل محدا ال امية من
changed from )θ3( to (θ rad).
111
FLUID STATICS 3 الموائع في حالة السكون
The force F is, in fact, the resultant force for القمي المحصةة لتا ير قمتان هما قمي الض وF متعد القمي
both, the pressure force ( P x A) acting upward ) التا تعمل إلى األوةى باالتاا العممدي وةى السغوهP x A(
on the surface, and the gravity force (mg) acting ) التغا تعمغل إلغى االسغفل باالتاغا العمغمديmg( مقمي ال قغل
downward on the bottom of the container. The مإن الضغ وين الاغانبيين متعاكسغا االتاغا. وةى قعر الموغاء
side pressures act in opposite directions, : ملهذا سي ت ل احداهما اال ر م تبقى القمي باالتاا األاقا
canceling each other; hence, the remaining
force in the horizontal direction will be:
F = m.g tan θ 3 4
112
FLUID STATICS 3 الموائع في حالة السكون
tan θ = (3.25)
Note that equation 3.25 can be applied to يتضه مما مرد سابقا ن أن سوه السا ل المعال ااقيا ن يميل ب امية
calculate the angle θ for the tilted surface of a متاغغدر. 3.25 وغغن األا غ التغغا تحسغغب باسغغت دام المعادلغغةθ
horizontally accelerated liquid. Since there is no اإل اري إلى أن الض و اا أية نقوة كانغ سيسغامي ومغ تةغك
movement in the vertical direction, the النقوغة تحغ سغغوه السغا ل الما غغل مضغغرمبا ن بالك ااغغة مالتعايغغل
pressure at any point within the liquid will equal ) مذلغغك النعغغدام الحركغغة اغغا األتاغغايh g( أي, الاغغاذبا
the height of the liquid multiplied by the density . الرأسا
and acceleration due to gravity that is (h g).
Element, cross
section area A
Liquid,
density
Consider an element of the liquid having cross مت غ رانA ت مغغل من غغمرا ا مغغن السغغا ل مسغغاحة مقوع غ العرضغغا
section area A and moving upward with an . إلى األوةىa بالتعايل
acceleration a. Conducting force balance at تحغ سغوهh ااذا ااري مما نغة قغم ونغد نقوغة تقغ بعمغ
a point at a depth h below the liquid surface: : السا ل ينت
113
FLUID STATICS 3 الموائع في حالة السكون
F= (P . A) – (h g A)
القمي المحصةة
Resultant force قمي الض و قل المن مر
Pressure force Weight of element
The resultant force is found by Newton’s :م تعوى القمي المحصةة من قانمن نيمتن ال انا
second law:
F = m.a
F = ( h A) a
: مبالتعميض نحصل وةى
Substituting:
( h A) a = P . A – g h
A
Then simplifying: : م التبسيو
P = g h (1 + ) (3.26)
Equation (3.26) is used to estimate P at any ) معادلة تم ي الض و التا يحسب بها3.23 ( تعد المعادلة
depth h and plot the pressure distribution. . h وند أي ومP مقدار الض و
1.15.3 Equation for accelerated fluid معادلة عامة لكتل الموائع المعزية3.33.3
masses
We apply Newton’s second law to a small نوب قانمن نيمتن ال غانا وةغى اسغيم صغ ير مغن المغا المبغين
element of a fluid as shown in Fig 3.33 3.33 اا ال كل
114
FLUID STATICS 3 الموائع في حالة السكون
x
Fig 3.33 3.33 الشكل
The force Fx acting in the x direction is: : كاآلتاx التا تة ر باالتااFx تعوى القمي
Fx = P dy dz - ( P + dx ) dy dz
Fx = - dx dy dz
According to Newton’s second law, the force Fx ) مضرمبةρ dx dy dz( أيضا ن تسامي كتةة الاسيمFx مالقمي
is equal to the mass of the element ( dx dy dz) : اذن, م ذلك بمماب قانمن نيمتن ال اناax بالتعايل
multiplied by the acceleration ax. Hence:
( dx dy dz) ax = - dx dy dz
=- x
115
FLUID STATICS 3 الموائع في حالة السكون
Fz = P dx dy - ( P + dz ) dx dy - g dx dy dz
قل الاسيم
Weight of element
Fz = - dx dy dz - g dx dy dz
Applying Newton’s second law in the z : z مبتوبي قانمن نيمتن ال انا باالتاا
direction:
Fz = ( dx dy dz) az
: م بالتعميض
Substitution gives:
gives
( dx dy dz) az = - dx dy dz - g dx dy dz
Simplifying:
: م التبسيو
= - ( g + az )
Using partial differentials format we can write: الرياضغية التغا ت غل التفاضلل الزئئلي م باست دام التحةغي
: يمكن كتابة
dP = dx + dz (3.27)
116
FLUID STATICS 3 الموائع في حالة السكون
dP = ( - ax ) dx + ( - ( g + az ) dz
The pressure will be constant along the liquid إال ان الضغ و سغغيكمن ابتغا ا وةغغى امتغغداد سغغوه السغغا ل م كغغذلك
surface and therefore (dP = 0); thus the )dP = 0( وةى امتداد أي و مما لةسوه ملهذا يصبه
equation will be: : مت تصر المعادلة إلى
0 = - ax dx + ( - ( g + az ) dz
=-( ) (3.28)
If the liquid is accelerated in any direction, then بهغا سغغوه التغغا ينحغرθ ظلل الئاويللة يم غل المقغدار
the differential will be the tan of the angle θ امغ ن اذا كغغان السغغا ل السغغا ل ونغغد تعايةغ بغ ي اتاغغا يكغغمن
for the inclined liquid surface. For example, if اغغم ت غغم صغةب ما غغل ب اميغغة ∅ ايسغغكمنas معاغ ن بتعايغغل
the liquid attains acceleration as over a solid : ax مقدار التعايل
boundary tilted at an angle ∅, then the value of
the acceleration ax will be:
ax = as cos ∅
az = as sin ∅
∅
tan θ = - ( (3.29)
∅
117
FLUID STATICS 3 الموائع في حالة السكون
The value of pressure at any point (z , x) can be ( بمكامةغةz , x) ميمكغن حسغاب مقغدار الضغ و اغا أي نقوغة
determined by integrating equation (3.27): : )3.23( المعادلة
P=∫ =∫ dx + ∫ dz
P=∫ +∫ ] dz
C is a constant, and the application of the above هم مقدار اب مسنمضه وريقة است دام المعادال التاC
equations will be demonstrated in the following . أ تق اا الم ال القادم
example.
A rectangular vessel 2 m long, 1m wide and 1.2 m مارتفاوغ1 m مورضغ2 m يستعمل مواء وملغ
1.2m in height, is used to transport water up a م األا300 لنقل الماء إلى أوةى منحدر ما ل ب امية قدرها
slope inclined at 300 as illustrated in Fig 3.34. If اغغاذا كانغ ك ااغغة المغغاء. 3.34 كمغا هغغم ممضغغه اغغا ال غغكل
the density of water is 1000 kg/m3, determine: : ) احسب1000 kg/m
(a) The tilt angle of the water surface, (أ( امية انحرا سوه الماء اا المواء ونغدما يبغدأ
when the vessel starts to ascend with 4 m/s2 المواء الصعمد بتعايل قدر
an acceleration of 4 m/s2.
(b) The maximum possible acceleration to (ب) أقصغغى تعايغغل يمكغغن ان ينغغدا ب غ الموغغاء إلغغى
ensure that the container will move to اوةى المنحدر دمن انسكاب الماء من وةما ن ان ومغ
the top of the slope without spilling the غم اماغد مقغدار القغمي التغا0.8 m المغاء اغا الموغاء
water. The depth of the water in the . تة ر اا قعر المواء
container is 0.8 m. Also calculate the
force acting at the bottom of the
container.
118
FLUID STATICS 3 الموائع في حالة السكون
Solution الحل
as
∅ = 300
∅
tan θA = -
∅
tan θA = - = - 0.2933
(the - ve sign is to indicate direction)
θA = 16.3470
(b) To keep the water in, zmax in Fig 3.35 zmax ( ب) البقاء الماء اا المواء دمن انسكاب ياب ان يكمن
must remain less the than the height of : أقل من ارتفاع المواء أي3.35 اا ال كل
the container, that is:
zmax ≤ 1.2 m
119
FLUID STATICS 3 الموائع في حالة السكون
zmax = AB + BC
∅
tan θA = -
∅
- 0.4 = -
120
FLUID STATICS 3 الموائع في حالة السكون
Determination of the force acting at the ايزاد الاوة المؤثرة في قعر الوعاء
bottom of the container
Force = Pressure x area of bottom of container مساحة قعر المواءx القمي= الض و
P = - ( x as cos ∅ - g z - z as sin ∅ ) + C
The force is acting vertically, therefore it will م لما كان القمي المة ري اا القعر لن تت ر بالتعايل األاقا لغذا
not be affected by the horizontal acceleration; : ت تصر المعادلة إلى
thus the equation will be reduced to:
P=z s sin ∅ ) + +C
z is the depth of water (0.8 m) and (C = 0). ) مإن0.8 m ( هم وم الماء ميسغاميz م هنا
Introducing the known quantities: : ) ماآلن نعمض بالقيم المعةممة انحصل وةىC = 0 (
Comment مالحظة
The negative sign should be considered اغا حغل ينب ا مراوغاي ا غاري النغاقل ونغد اسغت دام المعغادال
carefully when we solve similar problems. . مسا ل مما ةة
121
FLUID STATICS 3 الموائع في حالة السكون
The rotation of a fluid is encountered in تحصغغل هغغذ الحالغغة اغغا بعغغض المعغغدا الصغغناوية م غغل دمران
centrifugal pumps and in industrial separators كغذلك دمران المغا السا ل اا دا ل مضخة الطرد المركئ
such as centrifuges. . اا حمض فرائة الطرد المركئ
Consider a cylindrical element with cross dA ت مل اسيما ن من الما اسومانا ال كل مساحة مقوعغ
section area dA and depth dz in an equilibrium 3.33 اغا حالغة تغما ن كمغا هغم مبغين اغا ال غكلdz مومق
state, as shown in Fig 3.37. Accordingly, the : االقم المة ري اي اقمليا ستكمن متما نة ايضا اي ان
forces acting in the vertical direction will have
to be at equilibrium, that is:
122
FLUID STATICS 3 الموائع في حالة السكون
P+ dz
P+ dz
P+ dz
P
P + dz
Fig 3.37 Vertical forces acting on a fluid element القم المة ري اا اسيم الما اا االتاا الرأسا3.33 الشكل
[P+ dz ]PdA + m g = P . dA
m = (dA . dz )
P
[P+ dz ] dA – PdA = - dA dz g
=- g (3.30)
123
FLUID STATICS 3 الموائع في حالة السكون
Equation (3.30) is used to calculate pressure z ) لحساب مقدار ت ير الض و باالتاا3.33( تست دم المعادلة
variation in the z direction. For the pressure افغا ال غكل.ماالن سندرس تم ي الض و باتاا نص القوغر
distribution in the radial direction, we consider اغغا حالغغةdA يتضغغه اسغغيم مغغن المغغا مسغغاحة مقوع غ3.39
an element of fluid having cross section area . تما ن تح ت ير قمتا الض و مالورد المرك ي
dA; as shown in Fig 3.38. It is in a state of
equilibrium due to the equal and opposite
effect of the pressure and centrifugal forces.
[P+ dr ]
Centrifugal force
قوة الطرد المركئ
Fig 3.38 Radial forces acting on the fluid القغغم المغغة ري اغغا اسغغيم المغغا باتاغغا نص غ3.33 الشللكل
element القور
The centrifugal force is equal to the mass of the m تعوى قمي الورد المرك ي من حاصل ضرب كتةة الاسيم
element m multiplied by the angular ( متصغبهω2 r) اا التعايل باتاا نص القور الذي يسامي
acceleration (ω2 r). At equilibrium, we have: : معادلة االت ان
[P+ dr ] dA - P dA = m ω2 r
124
FLUID STATICS 3 الموائع في حالة السكون
Substituting the density in terms of volume مبالتعميض ون بداللة الك ااة مالحام نحصل وةى
dr dA = dA dr ω2 r
Cancelling dr dA: : dr dA مبا تصار
2
dr dA = dA dr ω r
dr
2
dA = dA dr ω2
=r ω (3.31)
r
The Pressure distribution, which is the value of أي مقدار وند أي نقوة كان اا, يمكن ايااد تم ي الض و
pressure at any point within the mass of the : كتةة السا ل الدمار وةى النحم اآلتا
rotating fluid, can be determined as follows:
dP = dz + dr
P=∫ dz +∫ r dr
Substituting for ( and ( ) from equations )3.31( ) م3.33( نعغغمض وغغن ( ) م ( ) مغغن المعغغادلتين
(3.30) and 93.31) and integrating we get: : م تاري مكامةة انحصل وةى
P – P0 = -( z – z0 ) ω2 r2 )/2 (3.32)
Where, P0 and z0 are the pressure and height of هما الض و مارتفاع السغا ل حغين تكغمن قيمغةz0 مP0 حيث
the liquid column at the central axis of the أي الضغ و ماالرتفغغاع وةغغى نصغ القوغغر تسغغامي الصغغفر
rotating tank. This can be expressed as follows: : امتداد غو مركغ الموغاء الغدمار ميمكغن التعبييغر وغن ذلغك
If r = 0 then z = z0 and P = P0 (P = P0) ) مz = z0 ( ) ا نr = 0 ( وندما
The angle of the line passing through point Q at وةغغى سغغوه السغغا لQ ميمكغغن حسغغاب اميغغة انحغغرا النقوغغة
the accelerated liquid surface can be evaluated ) حيغث3.25) المعال مرك يا باست دام معادلة مما ةغة لةمعادلغة
by applying an equation similar to )3.25). In this : ) اتصبه المعادلةω2 r( بالتعايلa يستبدل التعايل
case the acceleration a will be substituted by
the centrifugal acceleration (ω2 r) giving:
125
FLUID STATICS 3 الموائع في حالة السكون
tan θ =
= ω2 r/g
ω
z= +C (3.34)
The relationship (3.34) is clearly a parabola ) هغغا معادلغغة قو غ مكغغااا3.34) ممغغن الماضغغه أن المعادلغغة
equation, and C can be eliminated because O ونغد النقوغةz = 0 ألنC ميمكغن حغذ ال ابغ
at point O, z = 0. z here is the depth between مال غو المغار بالنقوغةO هم العم بين النقوةz مذلك باوتبار
O and line passing through Q; see Fig 3.39. . 3.38 انظر ال كل, Q
126
FLUID STATICS 3 الموائع في حالة السكون
ω
z= (3.35)
A cylindrical vessel has diameter 0.1 m and 0.3 m مارتفاو غ0.1 m موغغاء اسغغومانا ال غغكل قوغغر
height 0.3 m rotates around a vertical axis. If يدمر حمل محمر الرأسا ااذا كغان الموغاء يحتغمي مغاء بعمغ
the vessel contains water with depth 0.225 m احسغب السغروة ال اميغة بمحغدا. قبل دمران0.225 m
before commencing to rotate, calculate the : مذلكrad/s
angular velocity in rad/s for the cases:
(a) When the water starts to spill over from (أ) وندما ينسكب الماء من المواء
the vessel
(b) When the depth of the water along the (ب) وندما يكمن وم الماء وند المحمر يسامي الصفر
central axis equal to zero
Solution الحل
(a) (b)
127
FLUID STATICS 3 الموائع في حالة السكون
(a) The volume of the paraboloid of a (أ) ان حاغغم الزسلل المكللافد الللدوراني يسغغامي نصغغ
revolution is equal to half of the volume COD حاغغغم االسغغغومانة المحيوغغغة بغغغ اذن الحاغغغم
of the cylinder around it, therefore the : هم
volume COD will be:
COD = ½ π r2 z
The hatched volume CFOED, making up the (CFOED)مان حام الا ء المتبقا من االسومان المة ر
cylinder will be: : هم
CFOED = ½ π r2 z = ½ π r2 ( c + b )
If AB represents the level of water before : يم ل مستم الماء قبل الدمران اذنAB ااذا كان
rotation, then:
The volume (CFOED) = cylindrical volume (ABEF) (ABEF) ( = الحام االسوماناCFOED) الحام
= ½ π r2 (c + b) = π r2 b
(c = b) ملما كان
Since (c = b)
z = (c+ b) = 2c
r = ½ (0.1) = 0.05 m
128
FLUID STATICS 3 الموائع في حالة السكون
ω
z=
ω2 = 2 g z/r2
ω = 34.31 rad/s
(b) When the level of water is at the (ب) وندما ين فض مستم الماء ونغد المحغمر إلغى القعغر
bottom of the vessel as in Fig 3.40 b 3.40 b كما مبين اا ال كل
r= 0.05 m
z = 0.3 m
ω= = [ (2 x 9.8 x 0.3)]/0.05]
ω = 48.52 rad/s
129
FLUID STATICS 3 الموائع في حالة السكون
Length L m c الومل
Constant - - C اب
Height L m H االرتفاع
Volume L3 m3 V الحام
Note: rpm stands for revolutions per minute هم ودد الدمرا اا الدقيقة الماحدي rpm : مالحظة
rad/s = 2π rpm/60)
130
FLUID STATICS 3 الموائع في حالة السكون
3.1 Calculate the pressure at a depth of 2000 m تح سوه2000 m احسب مقدار الض و وند نقوة تق3.3
below sea water level. Take the density of the مغاء البحغر مفترضغا ن ك ااغة المغاء المغاله تسغامي
salty water 1002 kg/m3. . 1002 kg/m3
Ans. ج
19.66 MPa
3.2 Determine the absolute pressure and gauge احسغغب مقغغدار الض غ و الموة غ مالض غ و النسغغبا (ض غ و3.2
pressure at a depth of 14 m in water. The وةمغا ن ان ك ااغة. اغا المغاء14 m المقياس) وند نقوة تق بعمغ
density of water is 103 kg/m3 and the ممقدار الض و الامي السا د103 kg/m3 الماء
atmospheric pressure value is 101 kPa. . 101 kPa
3.3 Determine the absolute pressure at a depth اغغا سغغا ل نفوغغا8 m اغغد مقغغدار الض غ و الموةغ بعم غ3.3
of 8 m in petroleum liquid, its density 800 0.97 bar وةما ن ان الض و الامي السا د800 kg/m3 ك اات
kg/m3. The prevailing atmospheric pressure is
0.97 bar.
Ans. ج
159.78 kPa
3.4 At what depth in oil of density 800 kg/m3 اغا سغا ل1 bar احسب العم الذي يملد ضغ وا ن مقغدار3.3
will the pressure be 1 bar? . 800 kg/m3 نفوا ك اات
3.5 Calculate the pressure due to: : احسب مقدار الض و الناام ون3.3
(a) 400 mm column of mercury, specific gravity معتبغغغران ك ااغغغة400 mm (أ) ومغغغمد بغغغ ارتفاوغغغ
13.6 13.6 ال ب النسبية تسامي
131
FLUID STATICS 3 الموائع في حالة السكون
(b) 400 mm column of oil, specific weight مت غغغذا ا الغغغم ن400 mm (ب) ومغغغمد نفغغغو ارتفاوغغغ
7.9 kN/m3 7.9 kN/m3 النموا
Ans. ج
3.6 A storage tank, open to the atmosphere, ان مفتمة إلى ت ير الض و الامي يحتمي سا ن نفويا ا3.3
contains oil floating above a layer of water. If اغاذا كغان. 103 kg/m3 ممغاء ك ااتغ750 kg/m3 ك ااتغ
the height of the oil layer is 3 m and that of the ام الماء احسب مقدار2 m موم النفو3 m وم الماء
water 2 m, calculate the gauge and absolute الض و النسبا مالض و الموةغ لغد قعغر ال غ ان وةمغا ن ان
pressure acting at the bottom of the tank. The . 1 bar الض و الامي السا د يسامي
density of oil is 750 kg/m3 and that of water
103 kg/m3; the atmospheric pressure is 1 bar.
3.7 What is the reading of the pressure gauge in ممغا مقغدار3.41 كغم يقغرأ مقيغاس الضغ و اغا ال غكل3.3
Fig 3.41, and what is the value of the absolute وةم غا ن ان البغغارممتر يقغغرأ. ض غ و الهغغماء الموة غ اغغا ال غ ان
pressure of the air contained inside the vessel? 13600 kg/m3 مأن ك ااغة ال بغ. مغن ال بغ760 mm
The barometer reads 760 mm of mercury and . 103 kg/m3 م ك ااة الماء
the density of mercury is 13600 kg/m3 and that
of water 103 kg/m3.
Water ماء
132
FLUID STATICS 3 الموائع في حالة السكون
3.8 If the reading of the pressure gauge in 6.5 bar يقغرأ3.42 اذا كغان مقيغاس الضغ و اغا ال غكل3.3
Fig 3.42 is 6.5 bar what will the value of . C مB مA اما مقدار الض و وند النقاو
pressure be at A , B and C.
Oil نفط
Oil نفط
Water ماء
Water ماء
Ans. ج
3.9 A Bourdon gauge reads vacuum pressure of 32.45 cm يسغال مقيغاس بغمردن ضغ و اغرا مقغدار3.3
32.45 cm-mercury whilst the barometer reads احسب. 99.947 kPaمن ال ب اا المق الا يقرأ البارممتر
99.947 kPa. Calculate the absolute pressure . ض و المقياس الموة
registered by the Bourdon gauge.
133
FLUID STATICS 3 الموائع في حالة السكون
3.10 The pressure gauge in Fig 3.34 reads ضغ و اغغرا3.34 يسغغال مقيغغاس الضغ و اغغا ال غغكل3.33
vacuum pressure of 12 cm-mercury. Determine احسغب ارتفغاع مسغتم السغما ل. من ال ب12 cm مقدار
the height of the liquid columns A, B and C. The وةمغغغا ن أن ك ااغغغة ال بغغغC مB مA الغغغ ث اغغغا االنابيغغغب
density of mercury is 13600 kg/m3. . 13600 kg/m3
Air هواء
Oil نفط
Water ماء
Liquid سائل
Ans. ج
134
FLUID STATICS 3 الموائع في حالة السكون
3.11 Calculate the pressure difference between اغا ال غكلB مA أحسب ار الض و بين النقوتغين3.33
A and B in Fig 3.44; given that a = 1.7 m , (h = 0.6 m) (b = 0.85 m) (a = 1.7 m) وةما ن أن3.44
b = 0.85 m and h = 0.6 m
Water ماء
Mercury ب
3.12 If the water pressure at B in Fig 3.45 is 3.45 اغا ال غكلA مغا مقغدار الضغ و ونغد النقوغة3.32
172.37 kN/m2, determine the value of pressure 172.37 kN/m2 يساميB وةما ن أن ضغ الماء وند النقوة
at A.
: مأن
Given:
135
FLUID STATICS 3 الموائع في حالة السكون
Oil نفط
Water ماء
Water ماء
Mercury ئئبق
ج
Ans.
220.39 kPa
3.13 If the pressure gauge in Fig 3.4 is reading مبغ ي اتاغا3.43 كم سيقرأ المانممتر المبين اا ال كل3.33
vacuum equivalent to 500 mm-mercury, what وةمغا ن أن مقيغغاس الضغ و. سغيرتف ال بغ ونغغدما يفغغته الصغمام
will be the reading of the manometer when the . من ال ب500 mm يسال ض و ارا يكااا
valve is opened? In which direction will the
mercury rise?
Valve صما
Water Water
ماء ماء
136
FLUID STATICS 3 الموائع في حالة السكون
3.14 A circular plate has diameter of 1.25 m, م ممري اا الماء ب كل1.25 m صفيحة دا رية قورها3.14
submerged in water in an inclined position. The 3.3 m اغاذا كغان ارتفغاع المغاء اغم الحااغة العةيغا, ما غل
water level is 0.6 m above the upper edge, and اد مقدار القمي التا ية ر1.5 m مارتفاو ام الحااة السفةى
1.5 m above the lower edge. Determine the بهغغا المغغاء اغغا سغغوه الصغغفيحة غغم احسغغب وم غ نقوغغة مرك غ
water force acting on the surface of the plate. . 103 kg/m3 ك ااة الماء. الض و ون سوه الماء
Also, calculate the depth of the pressure centre
point from the surface. Density of water is 103
kg/m3.
Ans. ج
12.65 kN , 1.10 m
3.15 A rectangular vessel having length of 4 m 2 m مورضغ4 m موغاء مسغتويل المقوغ وملغ3.33
and width of 2 m and height of 6 m contains اغاذا. 3.3 يحتمي سا ن نفويا ن ك اات النسغبية6 m مارتفاو
liquid, specific gravity 0.7. If the depth of the احسغغب مقغغدار القغغم5.3 m كغغان ارتفغغاع السغغا ل اغغا الموغغاء
liquid in the vessel is 5.3 m, calculate the force التغغا تغغة ر اغغا قعغغر الموغغاء م امانب غ غغم اماغغد ممق غ مرك غ
acting on the bottom and on the sides of the . الض و المسةو وةى الامانب
vessel. Determine the position of the centre of
pressure acting on the sides.
3.16 an inclined surface is submerged in oil of أماد مقدار القمي مممق نقوغة ت يرهغا اغا سغوه ما غل3.33
density 900 kg/m3, as shown in Fig 3.47. If the كمغغا مبغغين اغغا ال غغكل833 kg/m3 م مغغمر اغغا نفغغو ك ااتغغ
surface width is 2m and its higher edge is مان حااتغ العةيغا متصغةة2 m وةما ن أن ورض السوه,3.43
attached to a hinge, calculate the force acting . بمفصل
on the surface and determine the force point of
action.
Ans. ج
477 kN , 4.66 m
137
FLUID STATICS 3 الموائع في حالة السكون
مفصل Hinge
3.17 A pipeline, diameter 1.1 m, contains oil 3.71أنبمب قور 1.1 mيحتمي نفوا ن ك اات النسبية 0.87
trapped on one side of a gate valve. The محبمسا ن وةى اانب صما بلوابي متصغل بغاالنبمب .اغاذا كغان
pressure magnitude along the central line of the مقدار الض و وةى امتداد ال و المار بمرك االنبمب يسامي
pipeline is equal to 19.6 x 104 Pa. Estimate the 19.6 x 104 Paاد القمي المة ري وةى بمابة الصمام م اماد
force acting on the gate of the valve and find ممق مرك الض و.
the pressure centre point.
3.18 A rectangular gate hinged at A, as shown 3.33بوابلللة مسلللتطيية ال غغغكل متصغغغةة بمفصغغغل ونغغغد النقوغغغة
in Fig 3.48, kept closed by weight Wt. The length , Aكمغغا يتضغغه اغغا ال غغكل 3.49حيغغث تبقغغى مسغغدمدي
of the gate is 0.9 m , width is 1.2 m and the بماسوة ال قل Wtالم ب وةيها .ااذا كان وغمل البمابغة 0.9 m
total weight of the gate and the extra weight is مورضغغها 1.2 mممقغغدار قغغل البمابغغة مال قغغل االضغغااا معغا ن
9801 N. Find the height of water h required to يسغامي , 9810 Nاغد ارتفغاع المغاء hالغذي سغيةدي إلغى اغته
open the gate; G is the centre of gravity for the البمابة .وةما ن ان النقوة Gها مرك ال قل الكةا .
total weight.
138
FLUID STATICS 3 الموائع في حالة السكون
Water ماء
Ans ج
0.88 m
3.19 A rectangular tank contains water to a كمغا1.2 m ان مستويل المقو يحتغمي مغاء بعمغ 3.33
2
depth of 1.2 m as shown in Fig 3.49. There is an اغغم35 kN/m مهغغماء بض غ و3.48 مبغغين اغغا ال غغكل
air layer at pressure 35 kN/m2 above the water. موغمل أحغد ادرانغ1.8 m الماء ااذا كغان ارتفغاع ال غ ان
The height of the tank is 1.8 m and the length of اغد أيضغا ن. مغا مقغدار القغمي المحصغةة وةغى هغذا الاغدار3 m
its side is 3 m. What will be the magnitude of ممقغ مركغ الضغ و نسغبة إلغى قعغر ال غ ان غم ارسغم م ووغا ن
the resultant force acting the side? Where will . 1000 kg/m3 ك ااة الماء. لةض و
the centre of pressure be located? Draw a
pressure diagram. Density of water is 1000
kg/m3.
139
FLUID STATICS 3 الموائع في حالة السكون
Air هواء
Water ماء
3.20 A cubical storage tank, dimensions 1.6 m x مارتفاوغ1.6 m مورضغ1.6 m ان وملغ 3.23
1.6 m x 1.6 m, contains water to a depth of 0.7 اغاذا كغان الحاغم المتبقغا, 0.7 m يحتمي ماء بعمغ1.6 m
m. The rest of the tank volume is filled with a احسغغب, 3.8 مغغن ال غ ان ممةغغمءان سغغا ن نفوي غا ن ك اات غ النسغغبية
petroleum liquid of specific gravity 0.9. مقدار القمي المة ري اا احد امانب ال ان م وين ممق مرك
Calculate the force acting on the side of the ) ( است دم م وو الض و. الض و نسبة إلى قعر ال ان
tank and determine the location of the pressure
centre point. (use pressure diagram)
3.21 A hinged gate is shaped as an arc of تمنغ1 m بمابغة مفصغةية ي غكل مقوعهغا قوسلا ً قوغر3.23
diameter 1 m. The gate is to stop water flowing ااذا كان ورض البمابغة3.53 تدا الماء كما مبين اا ال كل
out as shown in Fig 3.50. If the width of the gate . البقاء البمابة مسدمديF احسب مقدار القمي ال مة3 m
is 3 m, calculate the force F required to keep
the gate closed.
Ans. ج
11.715 kPa
140
FLUID STATICS 3 الموائع في حالة السكون
Water ماء
Hinge مفصل
3.22 Fig 3.51 illustrates a semicircular gate ABC ( ي مرهغاABC) بمابة نصف دائريلة3.51 يبين ال كل3.22
submerged under water on the curved side. The وةغغى1 m المغاء مغغن الاانغغب المحغدب بينمغغا يرتفغ إلغغى ومغ
water depth on the other plane side is 1 m. If احسب مقدار1 m ااذا كان ورض البمابة. الزانب المستو
the width of the gate is 1 m, determine the two . 103 kg/m3 ك ااة الماء. مركبتي الاوة وةى البمابة
force components acting on the gate. Density of
is water 103 kg/m3.
Ans. ج
Horizontal component 14.715 kN المركبة االفاية
Water ماء
Water ماء
141
FLUID STATICS 3 الموائع في حالة السكون
3.23 A metal cylinder has diameter of 3 m and م وملغ3 m اسغم معغدنا اسغومانا ال غكل قوغر3.23
length of 1.5 m. It is subjected to water current 1.5 m يعترض تيار الماء اا قنغاي مفتمحغة ورضغها1.5 m
in an open canal 1.5 m wide. If the level of اغغاذا كغغان مسغغتم المغغاء وةغغى اغغانبا األسغغومانة كمغغا مبغغين اغغا
water on each side of the cylinder is as shown in احسغغغب مقغغغدار القغغغمي المحصغغغةة المغغغة ري اغغغا3.52 ال غغغكل
Fig 3.52, determine the resultant force acting غم أماغد اقغل قغل ل سغومانة يكفغا, األسومانة ماتاا ت يرها
on the cylinder and find the direction of the line . البقاءها ابتة لد قعر القناي
of action. Calculate also the minimum weight of
the cylinder to keep it unmoving at the bottom
of the canal.
Ans. ج
142
FLUID STATICS 3 الموائع في حالة السكون
3.24 A ship displaces 125 m3 of sea water, من ماء البحر اد125 m3 ت يه با ري3.23
determine:
(a) The mass of the ship if the density of water 1025 kg/m3 (أ) كتةة البا ري اذا كان ك ااة الماء
is 1025 kg/m3
(b) The displaced volume of water if the density 1000 kg/m3 (ب) الحام الم اة وندما تكمن ك ااة الماء
is 1000 kg/m3
3.25 A metal pipe has an internal diameter of م ال غغاراا1.2 m انبغغمب معغغدنا قوغغر الغغدا ةا3.23
1.2 m and external diameter 1.25 m. The pipe is اغاذا كغان. ينقل غا ان وبر نهرمهم م ممر اا المغاء1.25 m
submerged under water and is used to االنبمب م ب لد القعر وند نقاو تبعد ة امتار بعضها وغن
transport gas across a river. It is anchored to احسب قمي الوفغم لكغل متغر مغن االنبغمب غم اغد مقغدار. بعض
the river bed in such a manner that each two ك ااغة المعغغدن. القغمي المغة ري إلغى األوةغى ونغغد كغل نقوغة ت بيغ
anchor points are 3 m apart. Determine the 1000 kg/m3 مك ااة الماء7900 kg/m3
buoyancy force per meter length of pipe.
Calculate also the force acting upward at each
anchor point. Density of metal is 7900 kg/m3
and that of water is 1000 kg/m3.
Ans. ج
3.26 Fig 3.53 illustrates a hydrometer having , V م حام بصةتm مكثاف كتةت3.53 يبين ال كل3.23
mass m and bulb-volume V. If the cross section موغمل الاغ ءA ااذا كان مساحة مقو الاغ ء العةغمي منغ
area of the upper part is A and the height of the غم ارسغمρ مك ااة السغا لx اد الع قة بينx الم ممر من
submerged length is x formulate an expression وا ن بيانيا ن يبين ذلك
relating x and the density of the liquid and
then draw a graph to illustrate the relationship.
143
FLUID STATICS 3 الموائع في حالة السكون
3.27 Fig 3.54 illustrates a cylinder having 1.8 m اسما ن اسومانيا ن قوغر3.54 يبين ال كل3.23
diameter of 1.8 m and height 1.2 m. The mass يوفغم غاقمليا ن اغا مغاء1019.3 kg مكتةتغ1.2 m مارتفاوغ
of the cylinder is 1019.3 kg which is floating اغم2 kN ااذا مض حمل قة. 1025 kg/m3 ماله ك اات
vertically in salty water of density 1025 kg/m3. If ( بحيغث يبقغىz( الاسم أحسب أقصى ارتفاع لمرك قل الحمغل
an object weighing 2 kN is placed on the top of وةما ن ان مرك قغل الاسغم يقغ. الاسم اا حالة تما ن مستقر
the cylinder, calculate the maximum height of . من اسفة0.45 m وةى ارتفاع
centre of gravity (z) for the object to keep the
cylinder in a state of stable equilibrium.
Ans. ج
1.74 m
144
FLUID STATICS 3 الموائع في حالة السكون
3.28 A rectangular vessel, 5 m length, 4 m width 4 m مورضغ5 m موغاء مسغتويل المقوغ وملغ3.23
and 3 m in height, contains water to a depth of يتحرك بتعايغل قغدر2 m يحتمي ماء بعم3 m مارتفاو
2 m. It is moving with an acceleration of 3 m/s2 : باالتااها اآلتية3 m/s2
in the following directions:
(أ) أاقيا ن
(a) Horizontally (ب) اقمليا ن إلى األوةى
(b) Vertically upwards ( ) اقمليا ن إلى األسفل
(c) Vertically downwards 0
. م األا33 (ث) إلى أوةى منحدر ما ل ب امية
(d) Up a slope inclined at 300 with the
horizontal
Estimate the tilt angle for the water احسغغب ال اميغغة التغغا ينحغغر بهغغا سغغوه المغغاء اغغا
surface in the vessel; calculate also the الموغغاء م مقغغدار القغغم المغغة ري اغغا قعغغر الموغغاء م
forces acting on the bottom of the 1000 ك ااغة المغاء, امانب القا مة لةحغاال االربغ
vessel and on its sides for the four kg/m3
cases. Density of water is 1000 kg/m3.
Ans. ج
170 , 00 , 00 , 12.50
145
FLUID STATICS 3 الموائع في حالة السكون
Investigate the following topics using the اسغغت دم االنترنغغ ممصغغادر ا غغر لةبحغغث اغغا الممضغغموا
internet and other sources of literature. Write a التالية م أود تقريرا لكل بحث متضمنا ذكر المصادر المعتمدي
report on your findings including references
3.30.1 The use of manometers as measuring قيغغغغاس اغغغغا الصغغغغناوا ال اسغغغغت دام المغغغغانممترا3.33.3
instruments in the oil industry النفوية
3.30.2 Conduct a laboratory experiment to ااغغري تاربغغة اغغا الم تبغغر تتضغغمن معللايرة مقيغغاس3.33.2
calibrate Bourdon gauge to read common ابحغث وغن وغر.بمردن ليقرأ محدا ض و ا عة االست دام
pressure units. Search for new methods to حدي ة لقياس ض و
measure pressure
3.30.3 The use of different types of gates to اغغغا صغغغناوة اسغغغت دام انغغغماع م تةفغغغة مغغغن البمابغغغا3.33.3
manufacture water storage tanks and to build انا الميا ماا ت يد السدمد
dams
3.30.4 The application of concepts of statics to توبي مفاهيم سكمن المما وةى مسا ل نقغل المغماد3.33.3
transportation of oil products, land and by sea النفوية اا البر مالبحر
3.30.5 The floatation of giant oil tankers in sea النفو العم ق اا ميا البحر المالحة وفم ناق3.33.3
water
3.30.6 The effect of liquid rotation in the design تغغغا ير دماران السغغغا ل اغغغا تصغغغميم بعغغغض المعغغغدا3.33.3
of some industrial equipment الصناوية
146
FLOW OF FLUIDS 4 الموائع في حالة الجريان
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Differentiate between ideal and real gases ادراك الفرق بين الغاز المثالي والغاز الحقيقي .1
2. Discuss the application of the basic concepts of مناقشة تطبيق المفاهيم االساسية في علم ديناميك .2
thermodynamics to gases الحرارة على الغازات
3. Apply control volume analysis to develop استخدام تحليالت حجم التحكم الشتقاق معاادالت .3
1
quantity conservation equations حفظ الكمية
4. Solve engineering problems involving Bernoulli حاال مسااانل هندسااية باسااتخدام معادلااة برنااولي .4
and continuity equations ومعادلة االتصال
5. Apply conservation of energy and momentum تطبياق معاادالت حفااظ الطاقاة وحفااظ الازخم فااي .5
equations to solve industrial problems حل المسانل الصناعية
147
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Unlike fluid statics, fluid dynamics is تختلا حالاة الجرياان عان حالاة الساكون بوجاود قاوص القاا
characterized by the existence of shear forces. التي سبق ان تحدثنا عنها ,فااذا انسااث الماانا فاوق تخام صالث
When a fluid moves over a solid boundary, then فااان ساارعتس ستساااوم الااتخم علااى امتااداد خااط التماااا و تاازداد
its velocity will equal that of the boundary. بازدياااد البعااد الرضسااي عنااس .وهكااذا يناات مااا يساامى بتدددرج
Velocity will increase as the vertical distance السرعة ويؤدم هاذا التادرف فاي السارعة دلاى ظهاور اجهدادات
away from the boundary increases. The القص بين طبقات المانا الجارم .وينادفا الماانا فاي انباوث ضو
variation in velocity, known as the velocity قناااة بساابث ال ااغط ثاام يتخااذ نمطاا معينااا نتيجااة تاارثير اجهااادات
القا وقاوة االساتمرار ,وقاد يكاون نماط الجرياان انسديابيا او
gradient, causes the rise of shear stresses
اضططرابيا .
between the moving fluid layers. The pressure
drives the fluid into a pipeline or a channel to
flow according to a certain flow regime: laminar
or turbulent. The regime is defined by the
influence of shear stresses and continuity force.
148
FLOW OF FLUIDS 4 الموائع في حالة الجريان
( )T = 0 (4.1)
v (m3/kg) is the specific volume and P (Pa or و يمثاال الرمااز, ] هااو الاج د النددوعيv (m3/kg)[ وهنااا
N/m2) is the pressure whilst T (K) denotes the [ درجاة الحارارةT (K) ] ] ال اغط وP (Pa or N/m2 ) [
absolute temperature. .المطلقة
فالسانل اذن هو مانا حير قابل لالن اغاط لاذا يادعى ماانا حيار
Hence, liquid is an incompressible fluid, whilst
ضما الغاز فهو ماانا انضدغاطي يمتااز باساتجابة. غير انضغاطي
gas is a compressible fluid whose volume will
اذ يتغير حجمس وفق قوانين محددة و تعتمد, حجمس دلى ال غط
change according to the change in pressure.
فماثال قاد. هذي القوانين بدورها علاى ناوع عملياة تغيار ال اغط
Moreover, the volume of the gas changes
يتغياار ال ااغط بثبااوت درجااة الحاارارة وكااذلك يمكاان ضن يتغياار
according to laws linked to the process of حجاام الغاااز بثبااوت ال ااغط عنااد تغياار درجااة الحاارارة حسااث
change. For example, the process could be a . قوانين معينة
change of pressure at constant temperature, or
a change of volume at constant pressure and
variable temperature.
الغاح المثالي4.2.1
4.2.1 Ideal Gas
الغاح المثالي هو المانا الذم يتبا القانون
The ideal gas is fluid which obeys the law
P V =m RT (4.2)
: ويمثل كل من
The symbols denote:
= ال غطP
P = Pressure
= الحجمV
V = Volume
= الكتلةm
M = Mass
= ثابت يخا الغازR
R = Gas Constant
149
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Equation (4.2) is used for one particular gas, تختل من حازR ( تخا حاز معين الن قيمة4.2) والمعادلة
because each gas has a unique value of R. وهنالك صيغة عامة لقانون الغاز المثالي وهي,دلى آخر
However, the following universal ideal gas law
will apply to all gases
P V = n R0 T (4.3)
Where n is the number of moles and R0 is هو ثابت الغاحات العا مقداريR0 هو عدد الموالت وn وهنا
known as the universal gas constant; its value .( الم حاز يكون8.314 kJ/kmol.K)
is 8.314 kJ/kmol.K for any gas under study.
Dividing equation (4.2) by equation (4.3): : ( نحصل على4.3) ( على المعادلة4.2) و بتقسيم المعادلة
The number of moles n is equal to the mass m مقسومة علاىm يساوم الكتلةn والمعرو ان عدد الموالت
divided by the molecular weight M, thus: : ضمM الوحن الجحيئي
n=
ضم ضن
thus
R0 = M R (4.4)
150
FLOW OF FLUIDS 4 الموائع في حالة الجريان
n 1 lb mol 1 kmol
T 492 0R 273.15 K
Assuming ideal gas behavior and applying )4.3( نفرت ان الغاز يسلك سلوكا مثاليا ونطبق المعادلة
equation (4.3)
P V = n R0 T
R0 = P V/n T
We first substitute for the unknowns in f.p.s: : f.p.s نعوت اوال عن القيم المجهولة بوحدات نظام
( )
R0 = = 0.0745 (ft. lbf)/(lb mol . 0R)
151
FLOW OF FLUIDS 4 الموائع في حالة الجريان
R0 = = 8314 J/kmol. K
Exercise تمرين
If the density of 1 kg of air at 20 0C and 100 22 0C من الهواء عند درجاة1 kg اذا علمت ان كثافة
kN/m2 is 1.2 kg/m3 estimate the number of فما هو عدد ماوالت1.2 kg/m3 هي100 kN/m2 و غط
moles under these conditions. الهواء تحت هذي الظرو ؟
Dalton’s law states that the total pressure for a ينا قانون دالتون على ان الضغط الكلدي لخلايط مان الغاازات
mixture of ideal gases is equal to the sum of the المثالية يساوم مجموع الضغوط الجحئية لمكونات الخليط فيماا
و يكتث بالصيغة االتية, لو شغل كل منها الحجم الكلي للخليط
partial pressures of the individual gases. Each
gas is assumed to be occupying the total
volume of the mixture; the law is written as
follows
P = pA + pB + pC + ………..
P = Σ pi (4.5)
Where P is the total pressure and pA, pB and pC هاايpC , pB , pA هااو ال ااغط الكلااي وP حياات ان
are the partial pressures for the mixture ال غط الجزنيpi و يمثل. ال غوط الجزنية لمكونات الخليط
components. The partial pressure for any . الم عنصر من المكونات
unknown component of the mixture is denoted
by pi.
If the volume of the mixture is denoted V, its n وعادد موالتاسT ودرجاة حرارتاسV فاذا كان حجم الخلايط
temperature T, the number of mole occupying و كانات, الذم يساوم مجموع موالت الغازات المكونة للخليط
the volume n, the partial volumes of the Vi اوVC , VB , VA , الاجو الجحئية لمكونات الخليط
components of the mixture VA, VB, VC,
152
FLOW OF FLUIDS 4 الموائع في حالة الجريان
or generally Vi and the universal gas constant فيمكن تطبيق قانون الغاز المثالي علىR0 وكان ثابت الغازات
Ro, then the ideal gas law can be applied to the : الخليط ضوال
gas mixture:
P V = n R 0T (a)
pi V = ni R0 T (b)
P Vi = ni R0 T (c)
وضن
we can also write
n = nA + nB + nC + ………..
n = Σ ni (d)
dividing equation (b) by (a) we obtain: : ( نحصل علىa) ( على المعادلةb) فعندما نقسم المعادلة
pi / P = ni / n
or ضو
pi / P = ni / Σ ni
dividing equation (c) by (a) we arrive at ( نحصل علىa) ( على المعادلةc) وعندما نقسم المعادلة
Vi / V = n i / Σ n i
Here, (ni / Σ ni) is the mole fraction denoted as الاذمyi ( هاو الكسدر المدولي يرماز لاسni / Σ ni) حيات
yi which is equal to the volume fraction (Vi /V). . (Vi / V) يساوم الكسر الاجمي
153
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Thus اذن
pi = yi P (4.6)
Vi = yi V (4.7)
It is worth noting that the concept of gas و تجااادر المالحظاااة بااارن دراساااة خالناااط الغاااازات قاااد تكاااون
mixtures is used to estimate the viscosity of a كااذلك لحساااث, اارورية لحساااث لزوجااة الخلاايط ̅ مااثال
gas mixture ̅ and the average molecular weight حيات يمكان اساتخدام, ̅ متوساط الاوزن الجزيناي للخلايط
̅ by applying the following equations المعادالت التالية
̅ = yA MA + yB MB + yC MC + ….. (4.9)
A gas mixture consists of carbon dioxide, carbon يتكون خلايط حاازات مان ثااني اوكسايد الكااربون وضول اوكسايد
monoxide, nitrogen, and oxygen. If the partial فاذا كانت ال غوط الجزنية. الكاربون ونايتروجين واوكسجين
pressures for the components are: : لمكونات الخليط كا تي
Calculate the total pressure and the . احسث ال غط الكلي للخليط و نسب مكونات الخليط
composition of the mixture.
154
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Solution الال
We assume that the gas mixture obeys Dalton’s . نفترت خليط من الغازات المثالية يتبا قانون دالتون
law; equation (4.5)
)4.5( لدينا من المعادلة
P = Σ pi
Similarly we obtain the other components و بنفا الطريقة نحسث المكونات االخرص حيت نحصل على
fractions
yCO = 0.067
yN2 = 0797
yO2 = 0.035
Comment مالاظة
The percentage composition for the mixture : نستنت ان النسث المنوية لمكونات الخليط هي
will be:
N2 = 79.7% , CO = 6.7% , CO2 = 10.1 , O2 = 3.5%
PV = Z n R0 T (4.10)
155
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The symbol Z denotes the compressibility معامدددل االنضدددعاطية وهاااو دالاااة لكااال مااان ال اااغطZ يمثااال
factor; it is a function of pressure and ) معادلاة تغيار الحالاة4.12( وتمني المعادلاة. ودرجة الحرارة
temperature. Generally, equation (4.10) instead ( للتعبياار عاان ساالوك4.3) التااي هااي ضكثاار عمومااا ماان المعادلااة
of equation (4.3) is applied to study the . الغاحات الاقيقة او الغازات غير المثاليدة كماا تعار احياناا
behavior of real gases or non-ideal gases. The الم حااز يكاون مان المخطاط المباينZ ويمكن استخراف قيمة
value of Z, for any gas, can be estimated from , الاذم ي ام قيماا تجريبياة مان مصاادر مختلفاة4.1 فاي الشاكل
Fig 4.1. The diagram includes experimental data ويالحظ ضن كل من درجة الحرارة وال غط هما درجة ارار
from various sources. The diagram is based on . PR وضغط مخفضTR مخفضة
values of reduced temperature TR and reduced
pressure PR.
TR = 3.5
1.2
TR = 5.0
1.1
TR = 2.0
1
0.9 TR = 1.6
TR = 1.5
0.8
TR = 1.4
0.7
TR = 1.3
0.6
TR = 1.2
0.5
Z 0.4 TR = 1.1
0.3
TR = 1.0
0.2
0.1
0
0 1 2 3 4 5 6
PR
Fig 4.1 Compressibility factor diagram مخطط معامل االن غاطية4.4 الشكل
156
FLOW OF FLUIDS 4 الموائع في حالة الجريان
PR = P/Pc (4.11)
TR = T/Tc (4.12)
Pc is the critical pressure and Tc is the critical . هي درجة الارار الارجةTc هو الضغط الارج وPc
temperature.
The above equations indicate that the reduced تشااير المعااادالت اعااالي الااى ان ال ااغط المخفاات هااو ال ااغط
pressure is equal to the real pressure divided by الحقيقي مقسوم على ال غط الحرف ودرجة الحرارة المخف ة
the critical pressure. The reduced temperature . هي الحقيقية مقسومة على درجة الحرارة الحرجة
is equal to the real temperature divided by the
critical temperature.
It is important to note that the derivation of the تجاادر المالحظااة ان اشااتقاق قااانون الغاااز المثااالي مبنااي علااى
ideal gas law is based on neglecting the , اهمال قوص التجاذث بين الجزينات مما يؤثر في تقديرال اغط
attraction forces between molecules; therefore وعلااى اهمااال الحجاام الحقيقااي للجزينااات الااذم يااؤثر باادوري فااي
وهناااك عاادد ماان المعااادالت التااي تمااني. تقاادير حجاام الغااازات
the pressure will be overestimated. It is also
عالقة تربط بين خواا الغاز الحقيقي منها معادلة فان دروالح
based on considering that the particles of an
ideal gas are extremely small; consequently
they do not contribute to the total volume.
There are numerous other equations of state
that can be used to account for non-ideality;
one of them is the van der Waals equation,
which is: : وهي
[P + ] [V - (nb) ] = n R0 T (4.13)
Where a is a constant to compensate for the هاوb هو ثابت يعوت عن ترثير قاوص التجااذث وانa حيت
attractive forces, and b is a constant to . ثابت يعوت عن تاثير حجم الجزينات
compensate for the volume of gas particles or
molecules.
157
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Note: we can use (Pa = N/m2) for pressure units (Pa = kN/m2) يمكن استخدام وحدات ال غط:مالحظة
(c) It is possible to use the (جـ) امكان استخدام مخطط معامل االن غاطية علما ان
compressibility chart, knowing that
Solution الال
(a) Applying the ideal gas law (ض) باستخدام قانون الغاز المثالي
Given لدينا
P V = n R0 T
V=
V = 0.0887 m3
158
FLOW OF FLUIDS 4 الموائع في حالة الجريان
(b) Applying van der Waals equation (ث) باستخدام معادلة فان در والز
The above equation can be solved by trial and يمكااان حااال المعادلاااة ا خيااارة بطريقاااة التجربدددة و الخطددد ضم
error. We assume a value for the volume V and ومان ثام حسااث قيماة الطار ا يسارV افترات قيماة للحجام
then calculate the value of the left hand side of فان لم يتساو ماا الطار االيمان يعااد افتارات قيماة, للمعادلة
the equation. The calculations are repeated, by وبتطبيق هذي, اخرص للحجم وهكذا حتى يتساوص طرفا المعادلة
assuming different values of V, until the two : الطريقة نحصل على
sides of the equation are equal. Applying this
method we obtain the following answer:
V = 0.1358 m3
تمرين
Exercise
. استخدم برنام اكسل النجاز التجربة والخطر
Solve by trial and error using Excel.
(جـ) باستخدام مخطط معامل االن غاطية
(c) Using the compressibility factor diagram
Z = 0.88
)4.12( االن نستخدم المعادلة
Now we apply equation )4.10(
P V = 0.88 n R0 T
V = 0.0780 m3
159
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Comment مالاظة
Note that the value of V varies from one مختلفاة مماا يادل علاى ضن افتارات السالوكV نالحظ ان قيمة
method to another. The answer 0.0887 m3 هااو بعيااد عاان0.0887 m3 المثااالي الااذم يعطااي حجمااا قاادري
shows that the ideal gas model gives an و قد عدت طريقة مخطط معامل االن غاطية, الجواث الحقيقي
inaccurate result. The chart method is closer to . هي ا قرث الى الواقا النها معتمدة على قياسات مختبرية
reality because it is based on experimental data.
160
FLOW OF FLUIDS 4 الموائع في حالة الجريان
For example, we can say: the state of the gas at فااي االنبااوث محااددة1 فمااثال نقااول ان حالااة الغاااز عنااد النقطااة
point 1, in a pipeline, is specified by T1, P1, v1. عنادT2, P2, v2 التاي تحولات دلاىT1, P1, v1 باالمتغيرات
This state will change to T2, P2, v2 at point 2, وان العملياات قاد تكاون. بسابث حادوت عملياة ماا2 النقطة
after the occurrence of a certain process. The انعكاسدددية حيااات تمثااال سلسااالة مااان اددداالت االتدددحان او غيدددر
process for such a change can be reversible, واذا تااذكرنا معنااى حالااة. انعكاسددية تشااذ عاان حاااالت االتاازان
meaning a series of equilibrium states, or االتااازان فيت اااي اناااس باالمكاااان اعاااادة المنظوماااة دلاااى حالتهاااا
irreversible, deviating from the equilibrium اماااا العملياااة حيااار.االبتدانياااة بعاااد حااادوت العملياااة االنعكاساااية
states. Remember the previous definition of the لهاذا اليمكان اعاادة, االنعكاسية فهي مقترنة ب ياع في الطاقة
equilibrium state; it indicated that the system . المنظومة لحالتها االبتدانية ما لام ت ا اليهاا طاقاة تعوي اية
can be returned to its initial state after the ومثااال ذلااك,وان معظاام العمليااات هااي عمليااات حياار انعكاسااية
حركة المكبا في اساطوانة المحارك التاي تقتارن دانماا ب اياع
occurrence of a reversible process. Whereas,
ولكننا نفتارت ان هاذي العملياة هاي,في الطاقة بسبث االحتكاك
the irreversible process is normally
عملياة انعكاساية لنااتمكن مان حساااث مقادار الشااغل المنجاز مااثال
accompanied by energy loss, therefore it will
. حيت تهمل الطاقة ال انعة التي يصعث تخمينها نظريا
not revert to its initial state unless the energy
loss is compensated. Most of the processes are
irreversible and a good example is the
movement of a piston inside a cylinder; the P 1
Cycle دورة
process is always accompanied by loss of energy
2
due to friction. However, to be able to calculate
the work done by the piston we normally ignore 4
3
the energy losses and assume a reversible
process. v
Sometimes, the system operates according to a والااادورة هااي عااادد, وتشااتغل المنظومااة احياناااا بصاايغة دور
cycle; the cycle is made up of a number of . العمليات المتعاقبة التي تعيد المنظومة دلى حالتها االبتدانية
successive processes that can take the system
back to its initial state.
It is the energy arising as a result of the physical هي الطاقة الناجمة عن الحالة الفيزيانية للماانا المتمثلاة بحركاة
state associated with the structure and motion . J/kg ووحداتهاU ويرمز لها.وتركيث الجزينات
of the fluid molecules. It is denoted U and has
the units of J/kg.
161
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Kinetic energy, denoted KE, is associated with هي الطاقة المقترنة بجريان المانا وتعتمد على سارعة الجرياان
the flow of the fluid. It is a function of velocity ū وتحسث من السرعة كاآلتيJ/kg وحداتهاKE ويرمز لهاū
and has the units J/kg. The kinetic energy is
estimated according to the following formula
KE = ½ ū2 )4.14 (
Potential energy is due to the position of the هي التي تعتمد على موقا المادة فاي مجاال الجاذبياة االر اية
object within the gravity field of earth; denoted و تعطى منJ/kg ووحداتهاPE و يرمز لها
PE, it has the units of J/kg. It is given by
PE = g z (4.15)
z is the height of the object relative to an . هو ارتفاع عينة المادة من مستوى اسناد اختياريz
arbitrary datum.
Pressure energy is the work required to push وهي تمثال الشاغل الاالزم لادفا الماانا فاي المنظوماة دون تغيار
the fluid into the system without changing its وتعطااى ماان حاصاال اارث ال ااغط بااالحجم النااوعي,حجمااس
volume. It is denoted Epr, has the units of J/kg . J/kg ووحداتهاEpr ويرمز لها
and is given by multiplying the pressure by
specific volume.
Epr = P v (4.16)
It is the sum of all the energies per unit mass, وهي مجموع الطاقات لوحدة الكتلة ضم
162
FLOW OF FLUIDS 4 الموائع في حالة الجريان
E = U + KE + PE + Epr
4.3.2 Work and the first law 4.4.4الشغل والقانون االول لديناميك الارار
Work done on the gas, or done by the gas, is الشاغل المنجاز يرمز للشغل wووحداتس هي . J/kgويعر
denoted w and has the units J/kg. It is given by على الغاز ضو الذم ينجزي الغاز بالعالقة
the following relationship
∫=w )(4.18
The above definition applies only to changes of ينطباق هااذا التعريا فااي حالااة كاون عمليااة تغيار الحجاام عمليااة
volume via reversible processes. It does not انعكاسااية ,امااا اذا كاناات العمليااة حياار انعكاسااية فااان قسااما ماان
apply to irreversible processes, because some الطاقااة ساايتحول دلااى حاارارة ويتساارث خااارف المنظومااة ,فااال
of the energy will be lost from the system in the يصااي التعري ا .كمااا وتعتمااد مكاملااة المعادلااة ( )4.14علااى
)form of heat. The integration of equation (4.18 العالقة بين ال غط والحجم التي بدورها تعتمد على نوع عملياة
depends on the relationship between pressure تغياااار الحجاااام .ويعطااااى الشااااغل المنجااااز نتيجااااة تماااادد الغاااااز
and volume; this in turn depends on the type of الم غوط عالمة زاند فيعد شغال موجبا ,ضما الشغل الذم يباذل
علااى الغاااز ماان مصاادر خااارجي فيعااد سااالبا و يعطااى عالمااة
change in volume. The work resulting from the
ناقا .
expansion of a compressed gas is normally
considered positive, whilst that done on
compressing the gas is negative.
The first law of thermodynamics states that the ياانا القااانون االول لااديناميك الحاارارة علااى ان الزيااادة بمقاادار
increase in internal energy is equal to the net الطاقاااة الداخلياااة يسااااوم مقااادار صاااافي الحااارارة الداخلاااة دلاااى
amount of heat q J/kg transferred to the system المنظومة q J/kgناقصا صافي الشغل الذم تنجزي المنظومة
minus the net work done by the system w J/kg. , w J/kgضم ان
The first law is actually one form of the energy والقاانون هااو شااكل ماان اشااكال قااانون حفااظ الطاقااة ,و للعمليددة
conservation law, and for an infinitesimal المتناهية الصغر يصبي القانون االول :
process the law will be:
163
FLOW OF FLUIDS 4 الموائع في حالة الجريان
H=U+Pv )(4.21
Entropy s (J/kgK) is another thermodynamic واالنتروبااي ) s (J/kgKهااي االخاارص خاصااة ماان خااواا
property defined for the reversible process as المنظومة الدينمكية الحرارية التي تعر بالعالقة االتياة للعملياة
follows االنعكاسية فقط
For irreversible processes, there will be energy اياع بالطاقاة اما اذا كانت العملية عملية حير انعكاسية فهنالك
loss, and the relationship changes to و تصبي المعادلة
or او
δ is the amount of energy lost due to the حيت ضن δيمثل مقدار الطاقة ال انعة بسابث تحاول الطاقاة
conversion of mechanical energy to heat. الميكانيكية دلى طاقة حرارية ,ويمكن مكاملاة المعادلاة ()4.24
Equation (4.24) can be integrated to دلى
164
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Thermal energy – Temperature relation العالقة بين الطاقة الارارية ودرجة الارار
For constant volume-reversible processes, we عناادما تحاادت عمليااات انعكاسااية بثبااوت الحجاام فاايمكن تطبيااق
can apply the first law as follows: :القانون االول كاآلتي
We have لدينا
dU = δq – δw
δw = Pdv
∴ dU = δq - Pdv
dv = 0.0
dU = δq = Cv . dT (4.26)
Cv is the specific heat capacity at constant هي السعة الارارية النوعية للغاح بثبوت الاج ووحدتهاCv
volume, it has the units of J/kgK. . J/kgK هي
If the process is irreversible then the work will :ضما في حالة كون العملية حير انعكاسية فسيصبي الشغل
be:
δw = P dv – δLf (4.27)
Substituting for δw in the first law في القانون االول نحصل علىδw وبالتعويت عن
dU = δq – (P dv – δLf)
165
FLOW OF FLUIDS 4 الموائع في حالة الجريان
dU = δq + δ f = Cv +δ f (4.28)
A thermodynamic process at constant pressure عندما تحدت عملية ديناميكية حرارياة بثباوت ال اغط فايمكن
gives a relationship between H and T as follows: : على النحو االتيT وH التوصل دلى عالقة بين
dH = dU + P dv + v dP
Combining equations (4.20) and (4.27) will give ( الى4.27) ( و4.20) ويؤدم دم المعادلتين
dU = δq – ( P dv – δLf )
Substituting: : وبالتعويت
dH = [ δq – ( P dv – δLf ) ] + P dv + v dP
∴ dH = δq + δLf + v dP (4.28 A)
For a reversible process at constant pressure, ( و كاانδLf = 0.0) فااذا كانات العملياة عملياة انعكاساية ضم
we have (δLf = 0.0) and (dP = 0.0) and therefore: : ( سنحصل علىdP = 0.0) ال غط ثابتا ضم
dH = δq = CP dT (4.29)
166
FLOW OF FLUIDS 4 الموائع في حالة الجريان
In the above equation CP denotes the specific وحداتها, هي السعة الارارية النوعية بثبوت الضغطCP و هنا
heat capacity at constant pressure, having the ) نسااااااتنت4.24( ) و4.24( وماااااان المعااااااادلتين. J/kgK
units J/kgK. By combining equations (4.28) and العالقتين اآلتيتين لتعري السعة الحرارية النوعية للموانا
(4.29) we arrive at the definition of the specific
heat capacity for fluids as follows
( )v = Cv (4.30)
( )P = CP (4.31)
For ideal gases CP and Cv are not affected by Cv وCP و فيمااااا يخااااا الغااااازات المثاليااااة يفتاااارت ضن
temperature and therefore considered فتصاابي, ضم انهمااا لاان تتاارثرا بتغياار درجااة الحاارارة, ثابتتااان
المعادلتان
constant, consequently the equations become
= Cv (4.32)
= CP (4.33)
Subtracting equation (4.32) from equation ( ينت4.33) ( من المعادلة4.32) وعندما نطر المعادلة
(4.33):
(CP – Cv) = -
167
FLOW OF FLUIDS 4 الموائع في حالة الجريان
H=U+Pv
( )
- =
( )
= )(CP – Cv
For each kilogram of perfect gas we have ولكااال كيلاااوحرام مااان الغااااز التاااام ,ضم المثاااالي ثابااات الساااعة
الحرارية ,لدينا
Pv = RT
)(m =1
( )
= )(CP – Cv
ضم ضن :
Thus:
168
FLOW OF FLUIDS 4 الموائع في حالة الجريان
This is the process of changing pressure and حيات يتغيار, وهي العملية التاي تجارم بثباوت درجاة الحارارة
volume from an initial state of the gas to a final , كاال ماان ال ااغط و الحجاام ماان الحالااة االبتدانيااة دلااى النهانيااة
one at constant temperature. . وتسمى احيانا العملية االيسوثرمية
If we consider ideal gas conditions then we can واذا اعتبرنااا الغاااز مثاليااا فاايمكن ايجاااد عالقااة تخااا العمليااة
develop a relationship for such a process based : ابتداء بقانون الغاز المثالي
on the ideal gas law as follows:
Pv=mRT
Pv=C (4.37)
For a change from state (1) to state (2), ) نكتااث2( ) دلااى الحالااة1( وحااين حاادوت التغياار ماان الحالااة
equation (4.37) is written as: : ( بالصيغة4.34 ) المعادلة
P1 v1 = P2 v2 (4.38)
P1V1
P
P2V2
169
FLOW OF FLUIDS 4 الموائع في حالة الجريان
For an ideal gas the isobaric process is given by: يمكن تمثيل العملية بثبوت ال غط للغاز المثالي كاآلتي
=
=C )(4.39
= )(4.40
P
V
4.3.3 Isochoric process 4.4.3العملية بثبوت الاج
The isochoric process is given by العملية بثبوت الحجم للغاز المثالي هي
=C )(4.41
= )(4.42
P
V
170
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Pi
Pf
Vi Vf
This is a reversible constant entropy process تسااامى هاااذي العملياااة االيسااانتروبية ,هاااي فاااي الواقاااا عملياااة
with no heat exchange, where dS = 0.0, given انعكاساية خالياة مان التباادل الحارارم فيهاا ) (dS = 0.0و
by: تتبا القانون:
P vγ = C )(4.44
For an ideal gas we define γ: حيت ضن للغاز المثالي تعطى γمن :
=γ )(4.46
Isentropic process
T
S1
S2
171
S
FLOW OF FLUIDS 4 الموائع في حالة الجريان
It is a reversible change of state process that هي عملية انعكاسية تاؤدم دلاى تغيار حالاة الغااز حساث العالقاة
obeys the following relationship: االتية :
The value of k depends on the amount of heat و يتخذ kقيم بين 1.0و γويعتمد مقداري على كمية انتقال
transfer to the environment and will be in the الحرارة دلى خارف المنظومة و تجادر االشاارة دلاى ان العملياة
range 1.0 – γ. The polytropic process takes البوليتروبية ليست ثابتة درجة الحرارة وفي نفاا الوقات ليسات
place with changes in temperature and includes خاليااة ماان التبااادل الحاارارم وفااي طبيعااة الحااال يمكاان تطبيااق
heat exchange. The ideal gas law and equation قانون الغاز المثاالي لهاذي العملياة ا اافة دلاى المعادلاة )(4.44
(4.47) can be applied for this process, so that: ام :
Pv=mRT
Equation (4.49) can also be applied to isentropic و كذلك تنطبق المعادلة ) (4.49على العملية ثابتة االنتروبي .
processes.
P
P1,V1
k
PV =C
P2,V2 V
0.1 m3 of a gas was compressed according to غطت كمية من الغاز حجمها 0.1 m3بموجث القانون
P Vk = C
172
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The initial conditions were (25 0C , 120 kN/m2) (25 0C , 120 kN/m2) علماا ان الظارو االبتدانياة كانات
and the final pressure 1.2 MN/m2. Calculate احسث1.2 MN/m2 وال غط النهاني
(a) The work done on the gas (ا) مقدار الشغل المبذول على الغاز
(b) The change in internal energy (ث) مقدار التغير في الطاقة الداخلية
(c) The amount of heat transferred (ف) مقدار الحرارة المنتقلة
Solution الال
T1 = 25 + 273 = 298 K , V1 = 0.1 m3 , P1 = 120 x 103 N/m2 (Pa),P2 = 1.2 x 106 N/m2 (Pa)
Assuming نفترت
1. Reversible process for the pressure ان عملية رفا ال غط هي عملية انعكاسية.1
change يسلك الغاز سلوكا مثاليا.2
2. Ideal gas behaviour
(a) The total work is given by (w .m), we ( ولديناw .m) (ا) الشغل الكلي هو
have
w=∫
w.m=∫ (A)
w.m=∫
w.m=C∫
173
FLOW OF FLUIDS 4 الموائع في حالة الجريان
C = P Vk = P1 V1 k = P2 V2 k
We can now substitute for C by (P2 V2k ) in the ( في الحد ا يسرP2 V2k ) بالمقدارC فيمكننا التعويت عن
left hand side term and by (P1 V1k ) in the right : ( في الحد االيمن و نحصل علىP1 V1k ) وبالمقدار
hand side term to arrive at:
w .m =
w .m = (C)
To calculate work, we must first determine the : ضوال إليجاد الشغلV2 و ينبغي حساث قيمة
value of V2:
P1 = P2 ( Eq. 4.48)
P1 = P2
V2 = 0.01467 m3
174
FLOW OF FLUIDS 4 الموائع في حالة الجريان
w . m = - 28020 J
Comment مالاظة
The amount of total work is equal to (-28020 J); ( وتشايرعالمة النااقا هناا- 28020 J) الشاغل الكلاي يسااوم
the minus sign indicates that the work is done . دلى ضن الشغل هو شغل مبذول على الغاز
on the gas.
( b) We now calculate the change in internal (ث) نحساااث اآلن مقااادار التغيااار بالطاقاااة الداخلياااة باساااتخدام
energy by applying equation (4.43), but we T2 ) ونبدض بايجاد قيمة درجة الحرارة4.43( المعادلة
must first determine the temperature T2
= (Eq. 4.49)
T2 = 437.166 K
Then we calculate m
m ثم نحسث
m = P1 V1/R T1
m = 0.141 kg
175
FLOW OF FLUIDS 4 الموائع في حالة الجريان
CP – Cv = R (Eq. 4.36)
(U2 – U1) m = m Cv ( T2 – T1 )
∆U. m = 14.128 kJ
(c) We calculate the amount of heat transfer by ( ف) نحساث مقادار الحاارارة المنتقلاة باساتخدام القااانون ا ول
applying the first law of thermodynamics لديناميك الحرارة
q = w + ∆U
q . m = w . m + ∆U . m
q . m = - 28.020 + 14.128
q . m = - 13.892 kJ
Comment مالاظة
The negative sign indicates that the heat is lost تشاايرعالمة الناااقا هنااا دلااى ان الحاارارة المنتقلااة هااي حاارارة
from the system. . مفقودة من المنظومة
Exercise تمرين
مفتر ا ان حالة الغاز تتغيار بموجاث4.4 اعد حسابات المثال
Repeat the calculations for example 4.4
. )0.720 kJ/kgK( هوCv ( وان مقدارP Vγ = C ) العالقة
assuming the change of state for the gas follows
(P Vγ = C ) and (Cv = 0.720 kJ/kgK).
176
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Fig 4.3 streamlines through a restriction in flow خطوط االنسياث في ت يقة في الجريان4.4 الشكل
177
FLOW OF FLUIDS 4 الموائع في حالة الجريان
A group of streamlines is known as a stream ضنظر,وتسمى مجموعة من الخطوط ا نسياث انبوبة األنسياب
tube, see Fig 4.4. Since the flow of the fluid is ونظرا لجريان المانا فاي االتجااي الطاولي نبوباة. 4.4 الشكل
along the length of the stream tube only, the فال يمكن ضن يعبر المانا ساطي ا نبوباة برتجااي, ا نسياث فقط
fluid will not be able to cross the tube surface in . نص القطر وكرنس يجرم في داخل انبوث لاس جادران خيالياة
the radial direction. Accordingly, the fluid is و يفيااد مفهااوم انبوبااة ا نسااياث فااي تحلياال جريااان المااانا النااس
assumed to be flowing within an imaginary يساامي برتخاااذ جساايمات معزولااة فااي المااانا جااراء التحلاايالت
boundary. The concept of stream tubes is useful . عليها
for fluid flow analysis, because it helps to
consider isolated elements of the fluid.
If the velocity does not change at any instance يعد الجريان منتظما عندما تكون سرعتس ثابتة المقادار واالتجااد
and at all points within the fluid bulk, then the ضماا اذا تغيارت السارعة, في جميا نقاط المانا في تلاك اللحظاة
ويطلق علاى. من نقطة دلى ا خرص فيدعى جريان غير منتظ
flow is named uniform flow. However, if the
بينماا يسامى,الجريان ثابت المقدار ما الزمن الجريان المستقر
velocity changes from one point to another
الجريان متغير المقدار ما الزمن الجريان غير المستقر ضم ضناس
then it is a non-uniform flow. Flow which is
ويعااد الجريددان أنسدديابيا عناادما يكااون هادنااا و. جريانااا معجااال
independent of time is known as steady flow,
اضددطرابيا عناادما تكااون الساارعة عاليااة لحااد يثياار الاادوامات فااي
whilst the flow that varies in value with time is .المانا
called unsteady flow or accelerated flow. Flow
in which the fluid travels smoothly or in regular
Turbulent flow جريان ا طرابي
paths is laminar flow, in contrast to turbulent
flow, in which the fluid undergoes irregular
fluctuations and mixing.
178
FLOW OF FLUIDS 4 الموائع في حالة الجريان
In this chapter the flow analysis will be limited , وسنقتصر التحليالت في هذا الفصل على الجريان ببعدد واادد
to one dimensional flow. To clarify, see Fig 4.5 حيات يادخل الماانا دلااى4.5 ولتو ايي ماا ذكرنااي ترمال الشااكل
which shows the fluid entering the control )2( ) و يخرف عند السطي1( حجم التحكم عند السطي
volume at surface (1) and exiting at (2)
(1)
(2)
To simplify flow analysis, we usually consider ولكان ال, ويحدد حجم التحكم بالجدران لتسهيل التحلايالت فقاط
the wall of the pipe as the boundary for the . البعد باتجاي الجريانx ويمثل, يتخذ ذلك كشرط اساسي
control volume. The symbol x denotes the
direction of the one dimensional flow.
179
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Let us assume ψ to be a quantity per unit mass كمية لوحادة الكتلاة قياد الدراساة (ماثال طاقاةψ ولنفترت ضن
under study, for example energy per unit mass. ولغارت اشاتقاق معادل دخاول وخاروف الكمياة. )لوحدة الكتلة
Now, to be able to derive an equation for the عناادdA ماان حجاام الااتحكم نتخااذ مساااحة متناهيااة الصااغرψ
rate of quantity ψ entering and exiting the dA حيت تمثل هذي المساحة كمية متجهة مقدارها, (1) النقطة
control volume, we select an infinitesimal area u ويمثال, ( باتجااي الجرياان1) ولها اتجاي عمودم على السطي
dA at point (1). This area will be considered as a 4.4 انظر الشكل, dA السرعة المتجس العمودية على المساحة
vector, with a direction perpendicular to surface
(1) in the flow direction, and has a value equal
to dA. The symbol u denotes the velocity vector
perpendicular to the area dA. See Fig 4.6
u
u dA
dA
Surface (1)
As the differential volumetric rate dQ is equal ) يسااااومdQ( بماااا ان معددددل الجريدددان الاجمدددي التفاضدددلي
to the velocity multiplied by the cross section : السرعة م روبة بمساحة المقطا ضم
area:
dQ = u dA (4.50)
Thus the mass flow rate dG will be given by ( اآلتيdG) لذا يصبي معدل الجريان الكتلي
dG = dQ ρ = u ρ dA (4.51)
and the differential quantity moving across the ( في وحدةdA) ومقدار الكمية التفاضلي الذم يخترق المساحة
area dA per unit time will be (ψ dG) ( ψ dG) الزمن هو
∴ ψ dG = ψ u ρ dA
180
FLOW OF FLUIDS 4 الموائع في حالة الجريان
By integrating the differential quantity we وبمكاملااة الكميااة التفا االية نحصاال علااى معاادل انتقااال الكميااة
obtain the net rate of quantity transfer from the الصافي من حجم التحكم
control volume, this will be
∫ ρ
The above integral is equal to the difference ضم ضن معدل تغير الكمية الخارجة ناقصا معدل الكمية الداخلة
between the rate of quantity exiting and that ψ واآلن نحسث مقدار الكمية.يساوم مقدار التكامل اعالي
entering the control volume. Now, we can ) باجراء2( ) دلى1( المتبقي في حجم التحكم من السطي
evaluate the quantity remaining in the control :التكامل كاالتي
volume ψ, by integration over surface 1 and
surface 2 as follows:
∫ ∫ ρ dx
The rate of change of the remaining quantity ويصبي معدل تغير الكمية المتبقية
will then be
[∫ ∫ ρ dx]
Applying the principles of conservation of معادلة حفظ الكمية ينت وبناء على تعري
quantity we obtain
[∫ ∫ ρ dx] + ∫ ρ =0 (4.52)
181
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Thus, the quantity ψ becomes equal to 1, ن الكمية تصبي كتلاة, تساوم الواحدψ وهنا تصبي الكمية
because it is mass divided by mass. The : ونحصل على المعادلة االتصال كاالتي,مقسومة على كتلة
continuity equation will therefore be:
[∫ ∫ ρ dx] + ∫ ρ =0 (4.53)
ضو
or
=0
For steady state flow, equation (4.45) is ( في االة الجريان المستقر دلى4.45) وتختصر المعادلة
reduced to
u1 ρ1 A1 = u2 ρ2 A2 (4.55)
G1 = G2 (4.56)
Equation (4.45) or (4.56) is known as the mass ( معادلددة افددظ الكتلددة ضو4.56) ( ضو4.55) و تمثاال المعادلااة
conservation equation or the continuity . معادلة االتصال
equation.
182
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Equation (4.55) was derived based on the عنادu1 ( مفتر اين السارعة4.55) وقاد حصالنا علاى المعادلاة
assumption that the velocity u1 at section (1) ضماا اذا. ( ثابتتاان2) عناد المقطااu2 ( والسارعة1) المقطا
and the velocity u2 at section (2) are constant. كاناات الساارعة متغياارة عباار مساااحة المقطااا فيجااث ضن نسااتخدم
However, if the velocity varies across the متوسط السرعة بدال عن السرعة وتعريفها هو
section then we need to use the average
velocity; defined by the following equation
̅= ∫ (4.57)
E = U + ½ u2 + g z + P v
Applying the quantity conservation principle by E تساااوم الطاقااةψ وبتطبيااق معادلااة حفااظ الكميااة باعتبااار
assuming ψ is energy E, we get: : نحصل على
[∫ ∫ ρ dx] + ∫ ρ =0 (4.58)
For steady state flow we can write: : وفي حالة استقرار الجريان
=0
∫ ρ =0 (4.59)
183
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Substituting E in equation (4.59) using equation : )4.59( في المعادلةE ( عن4.17) وبالتعويت من المعادلة
(4.17), we arrive at:
∫ ( + + + ) ρ =0 (4.60)
ضو ضن
or
∫ ( + + ) ρ +∫ ρ =0 (4.61)
If we assume the values v, ρ, P, z and U to be ( ثابتاة فاي ضم مقطاا فايv, ρ, P, z, U) ولو اعتبرنا المقاادير
constant across any section in the control (1) حجاام الااتحكم فاايمكن مكاملااة الحااد ا يساار بااين المقطعااين
volume, then we can integrate the left hand
∫ ( بمتااوسااط ( وبااالتعويت عاان المقاادار. (2) و
side term through sections (1) and (2).
سنحصال, (4.57) ̅ ( كما ورد فاي المعادلاةx A ( السرعة
Substituting for (∫ ) in the above على
equation by the average velocity ( ̅ x A)
according to equation (4.57) will give
In order to integrate the right hand side term of ( نسااتخدم فكاارة ايجاااد4.61) ولمكاملااة الح اد اآلخاار للمعادلااة
equation (4.61), we need to apply the concept فكما عرفنا متوسط السرعة عبر. متوسط الكمية عبر المساحة
of the average quantity across the section area. م ( يمكن تعميم هذا التعري4.57) مساحة المقطا بالمعادلة
The average of any quantity, which may change : ضم, قد تتغير عبر المقطاy كمية
across the section area, will be denoted y and
defined in a manner similar to that of the
average velocity given in equation (4.57). That
is:
̅= ∫ (4.63)
184
FLOW OF FLUIDS 4 الموائع في حالة الجريان
∫ ρ
Considering y to be u3 and ̅ to be ̅̅̅ then we و ̅ يساوم ̅̅̅ نساتطيا تطبياقu3 يساومy وعلى ضن
can apply equation (4.63) to u3 and write: : لنحصل علىu3 ( على مكعث السرعة4.63) المعادلة
̅̅̅= ∫
or ضو ان
∫ = ̅̅̅A (4.64)
By substituting equation (4.64) into equation ( يمكنناا مكاملاة4.41) ( في المعادلاة4.44) وبتعويت المعادلة
(4.61), we can then integrate the right hand الحد ا يمن كاآلتي
side term as follows
∫ ρ = ½ ρ2 ( ̅ ) A2 - ½ ρ1 (̅̅̅) A1 (4.65)
We now define the correction factor α by the بالمعادلة اآلتيةα معامل التصايح االن نعر
following equation
(̅)
α= ̅̅̅̅̅ (4.66)
∫ ρ = ρ2 [( ̅ )3 α A2 – ρ1 [( ̅ )3 α A1 (4.67)
185
∫ ρ = ρ2 [( ̅ )3 A2 – ρ1 [( ̅ )3 A1 (4.67)
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Substituting the integrals of equations (4.62) ( و4.42) و بااااالتعويت عاااان قاااايم التكاااااملين ماااان المعااااادلتين
and (4.67) into equation (4.61), we obtain: : ( نحصل على4.41) ( في المعادلة4.44)
+ ρ2 [( ̅ )3 α A2 – ρ1 [( ̅ )3 α A1 = 0 (4.68)
At steady state, equation (4.55) gives ( اآلتي4.55) وفي حالة ا ستقرار تعطينا معادلة حفظ الكتلة
̅ ρ1 A
̅ ρ1 A1 = ̅ ρ2 A2
+ ρ2 (U
[( ̅2 –)U
3
1) + (g zA22- –gρz11)[(+̅(P)2 v2 – ̅P2 ρ
3
vA12)1A+1=[(
= 0̅̅ ρ/2α)
2
– (̅ 2
/2α)](4.68)
=0
2 A2
Equation (4.69) shows that for steady state ) ضن صااافي الطاقااة يساااوم صاافرا فااي4.44( تعنااي المعادلااة
∆U + g ∆z + ∆ (P v) + ∆ ( ̅ /2 ) = 0 (الطاقاااات الداخلاااة4.69)
المنظوماااة ضو ضن مجماااوع, حالاااة ا ساااتقرار
condition, the net energy is equal to zero. In
other words, the total energy transferred into وهذا هاو مبادض موازناة, يساوم مجموع الطاقات الخارجة منها
the system equals to the total energy out. ولكااان قاااد يحااادت فاااي بعااات المنظوماااات الجرياااان.الطاقاااة
وانجااز شاغل, q امتصاا طاقة حرارية مان المحايط رمزهاا
However, some fluid flow systems may involve
الاذم يسامى شدغل عمدود االدار رمازي,خارف حدود المنظومة
heat transfer from the surrounding q, and
( بصيغة شاملة كاآلتي4.44( لذا تكتث المعادلة. Ws
external work done known as shaft work Ws. In
this case the equation (4.69) is generally written
as follows
̅
∆U + g ∆z + ∆ (P v) + ∆( ) = q – Ws (4.70)
186
∆U + g ∆z + ∆ (P v) + ∆ ( ̅ /2 ) = q – Ws (4.70)
FLOW OF FLUIDS 4 الموائع في حالة الجريان
For example, the energy equation can be فمااثال يمكاان تطبيااق معادلااة الطاقااة علااى المنظومااة المبينااة فااي
applied to the system illustrated in fig. 4.7. The التي تتكون من توربين وسخان ا افة الى االنابيث4.4 الشكل
system consists of a turbine, a boiler and حيت يعد جريان المانا فيهاا جرياناا مساتقرا, المبينة في الشكل
connecting pipes as shown in the diagram. The .
flow of the fluid in this system is considered
steady.
P2
U2
̅
P1
q
ρ2
U1
̅ Ws
q Fluid out
ρ1
Boiler P2
Fluid in Ws سخان
Fluid out
مانا U2
z2
z1 Turbine
توربين
Boiler
̅
P1
Fluid in Ρ2 z2
z1 U1
Turbine
Fig 4.7 Steady
̅ state flow system منظومة جريان في حالة االستقرار4.4 الشكل
ρ1
Sometimes, it isFig
required to solve
4.7 Steady stateproblems that
flow system تشامل
االستقرار
معادلاة ال
اساتخدامحالة
جريان في
المسرلة
منظومة
يتطلث حل
4.4 الشكل
وفي ضكثراالحوال
don’t include the internal energy U, then ( بداللة4.70) في المعادلةU لذا يعوت عن,الطاقة الداخلية
equation (4.70) is modified to include the : حيت. H االنثالبي
Enthalpy H, where:
̅
∴ ∆H + g ∆z + ∆(∆H)=-∆U
q ++W∆(P
s=0
v) (4.71)
∴ ∆H + g ∆z + ∆ ( ̅ /2 ) - q + Ws = 0
187
(4.71)
FLOW OF FLUIDS 4 الموائع في حالة الجريان
For infinitesimal changes we can write the وعند حدوت تغيرات متناهية الصغر في المنظومة تكتث معادلة
energy equation as: : الطاقة بالصيغة
̅
dH + g dz + d( ) – δq + δWs = 0
or ضو
dH +g dz + d( ̅ /2 ) – δq + δWs = 0
̅
dH + g dz + α d ̅ – δq + δWs = 0 (4.72)
dH + g dz + ( ̅ ̅/ ) – δq + δWs = 0
We make use of equation(4.72)
(4.28 A) to substitute بداللااةdH نعااوت عاان (4.28 A) وباسااتخدام المعادلااة
for dH by the friction losses δLf: : δLf خسائر االاتكاك
̅
δq + dH
δLf =+ vδqdP+ +δLg dz
+ v+dP d ̅ – δq + δWs = 0
f
̅
̅ ++ gdH
dδq δLdz++vδq
vdP
dP +gδW
+ +δL +( ̅δLf ̅/
+ vs+dP = 0 ) – δq + δW = (4.73)
f= f dz s 0
( ̅ ̅/ dH
) += gδqdz++δLv fdP δWs + δLf = 0
+ v+dP
The above formula is the (4.73)
general form of the وهااذي هااي الصاايغة العامااة لمعادلااة الطاقااة التااي يمكاان مكاملتهااا
energy equation which can be integrated as : على النحو اآلتي
follows:
∆
+ g ∆z + ∫ + Ws + Lf = 0 (4.74)
188 ∆
+ g ∆z + ∫ + Ws + Lf = 0 (4.74)
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The value of α is determined by the type of flow فاذا كان الجريان, على نوع او نمط الجريانα وتعتمد قيمة
or the flow regime; hence, for a streamline or واذا كان الجريان اضطرابيا, (α = 0.5) انسيابيا نتخذ قيمتها
laminar flow the value will be (α = 0.5) and for وساااايرتي تعرياااا الجريااااان االنساااايابي و. (α = 1) فااااان
a turbulent flow (α = ). The full definition of ويعتمااد انجاااز التكاماال فااي. اال ااطرابي فااي الفصاال القااادم
laminar and turbulent flow will be covered in ( على كون المانا ان غاطيا ضو حير ان غاطي4.44) المعادلة
the next chapter. The integration of equation P ففاااي الحالاااة ا ولاااى يقت اااي وجاااود عالقاااة باااين ال اااغط,
(4.74) depends on whether the fluid is فماثال اذا, يحددها نوع عملية تغير ال اغطv والحجم النوعي
compressible or incompressible. For :تغيااااار ال اااااغط بثباااااوت درجاااااة الحااااارارة فالعالقاااااة هاااااي
compressible fluids, it is imperative to have a v ( ضماا اذا كاان الجرياان حيار ان اغاطي فاانP . v = C)
relationship between the pressure P and the ثابت المقدار في جميا حاالت الجريان ويصبي التكامل
specific volume v. For example, if the pressure
changes occur at constant temperature then
the relationship is (P .v = C). However, for
incompressible fluids, v is always constant and
the integration will be as follows
∫ = v (P2 –P1)
For a frictionless flow system that does not تختصاار معادلااة الطاقااة دلااى معادلااة برنااولي باهمااال االحتكاااك
involve work, the energy equation will be . الناجم عن جرياان الماانا فاي المنظوماة التاي ال تنجاز شاغال
reduced to the Bernoulli equation. Equation ( دلى4.44) فتختزل المعادلة
(4.74) will therefore become
∆
+ g ∆z + ∫ =0 (4.75)
For an incompressible fluid, such as liquid, we كالسانل مثال فرن, وباعتبار المانا مانعا حير ان غاطي
have
∆
+ g ∆z + v ∆P= 0
189
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The specific volume is normally defined as بالمعادلاة معرv والمعرو ان الحجم النوعي
(ρ = 1/v); substituting in the above equation وبالتعويت نحصل على, )ρ = 1/v)
̅ ̅
+ g z2 + = + g z1 + (4.76)
Equation (4.76) is known as Bernoulli equation; وحدات كل حد بها, ( معادلة برنولي4.44) وتدعى المعادلة
the units of each term are J/kg. It is applied to وتنطبق على منظومة الجريان اذا افترتJ/kg
flow systems based on the following
assumptions
مانا احادم الطور -ض
a- Single phase fluid
مانا حير ان غاطي -ث
b- Incompressible fluid
جريان ببعد واحد -ت
c- One dimensional flow
جريان بدون احتكاك -ت
d- No external work done
. التنجز منظومة الجريان شغال خارجيا -ف
Sometimes, dividing equation (4.76) by g will واحيانااا نكتااث معادلااة برنااولي بصاايغة ضخاارص و ذلااك بتقساايم
provide another form of the Bernoulli equation, : حيت ينتg ) على4.44( المعادلة
which is:
̅ ̅
+ z2 + = + z1 + (4.77)
It is evident that each term of equation (4.77) (m) ( ان وحدات كل حد هي المتر4.77) ويالحظ في المعادلة
has the meter (m) as the unit of length. The ∆
) عمدود الطاقدة الاركيدة ) يسامى. ضم وحادات الطاول
∆
term ( ) is known as the kinetic energy ويقصاااد باااس ارتفااااع عماااود الماااانا الاااذم يكااااف مقااادار الطاقاااة
head, that is to say the height of the fluid عمدود الوضددع وهااو االرتفاااع المكااافz ويساامى.الحركياة
column equivalent to the kinetic energy. The وهااو, ) عمددود الضددغط ) كمااا يساامى, للطاقااة الكامنااة
term with z only is called the potential head,
. ارتفاع عمود المانا المكاف لطاقة ال غط
meaning the height equivalent to the potential
energy. The term ( ) is the pressure head,
which is the fluid height equivalent to the
pressure energy.
190
FLOW OF FLUIDS 4 الموائع في حالة الجريان
∆
The total equivalent head or total head is given ( العمود المكافئ الكلي او + z+ ( ويدعى
∆
by ( + z + ). Examples involving the وسنو ااااي تطبيقااااات معادلااااة الطاقااااة. العمددددود الكلددددي فقااااط
application of Bernoulli and energy equations . ومعادلة برنولي في االمثلة التي سنذكرها فيما بعد
will be covered later in this chapter.
ΣF = (m.u) (4.78)
The conservation of momentum equation, for :و يمكن ان نكتث نا معادلة افظ الحخ لحجم التحكم كاآلتي
the control volume, can be stated as follows:
[The resultant force acting on the control ] مجمل القوص المؤثرة في حجم التحكم[ = ] معدل تغيار الازخم
volume] = [the rate of change of momentum [ ] معدل تغيار الازخم الاداخل دلاى الحجام- [الخارف من الحجم
out] - the rate of change of momentum in] + [ ] معدل تغير الزخم المتبقي في حجم التحكم+
[the rate of change of momentum remaining
inside the control volume]
By comparing the above definition to the وعنادما نقاارن هااذا التعريا مااا معادلاة حفااظ الكتلاة يت ااي ان
conservation of mass equation, we can note الاازخم يبقااى او يحااتفظ بمقااداري فااي حالااة عاادم وجااود القااوص
that the momentum value will remain . الخارجية المؤثرة في حجم التحكم
unchanged unless external forces act on the
control volume.
191
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The resultant force is given by ΣF. The other وسنحصاال علااى, ΣF اآلن لاادينا مجمددل القددوى الم اؤثرة هااي
terms of the momentum conservation equation ψ الطر االخر من معادلة حفظ الزخم بالتعويت عن الكمية
can be obtained by substituting for the quantity (m.u/m) الكتلة) ضم/) بالكمية (الزخم4.52( في المعادلة
ψ, in equation (4.52), by the quantity : وهكذا تصبي معادلة الزخم, فقطu ضو السرعة
(momentum/mass) that is (m.u/m) which is
reduced to the velocity u. Thus the momentum
equation will be:
ΣF= ∫ ∫ ρ dx + ∫ ρ (4.79)
We assumed that the velocity u, in the flow عموديااة علااى مساااحة المقطااا باتجااايu وقااد افتر اانا الساارعة
direction, is perpendicular to the cross section ( على الجريان ببعد وااد4.79) ضم تطبق المعادلة, الجريان
area, thus equation (4.79) applies to one واالن نطباق معادلاة الازخم علاى جازء مان قنااة كماا هاو. فقاط
dimensional flow only. We will now apply the حيات يعاد الجرياان مساتقرا وببعاد واحاد, 4.4 مبين في الشاكل
momentum equation, for one dimensional . فقط
steady flow, to a section of flow in a channel, as
shown in Fig 4.8.
Fluid
المانا u1 , ρ1 u2 , ρ2
1 2
Channel wall
جدران القناة
Fig 4.8 Control volume within a flow channel حجم التحكم لجريان مانا في قناة الجريان4.4 الشكل
The resultant force ΣFx in the x direction is Fxp باتجاي الجريان يساوم قاوة ال اغطΣFx ضن مجمل القوص
obtained by adding all forces acting on the Fxs زانادا قاوة القاا, المؤثرة في حجم التحكم باتجاي الجريان
control volume. It is therefore equal to the , الناجمة عن االحتكاك بين جدران القناة وسطي التحكم
pressure force Fxp acting on the control volume,
plus the shear force Fxs due to friction between
the canal wall and the surface of the control
volume,
192
FLOW OF FLUIDS 4 الموائع في حالة الجريان
plus the component of the gravity force in the x Fxg وهيx زاندا مركبة قوة الجاذبية على جسيم المانا باالتجاة
direction Fxg, plus the component of the net وهي مركبة صافي القوة الخارجية المؤثرة في, Fxr زاندا القوة
external force acting on the control volume in وذلاك حاين يشامل حجام الاتحكم جادراناx حجم الاتحكم باالتجااي
the x direction Fxr. This is, of course, when the : ضم ضن.صلبة مثال جزء صغير من انبوث يجرم فيس المانا
control volume is enclosed by a solid wall such
as a fluid moving inside a small section of a
pipe.
∫ ∫ ρ dx = 0
Applying equation (4.63) to u2 which is changing : التي تتغير عبر مساحة المقطاu2 ( على4.63) وبتطبيق
in value across the section:
̅̅̅ = ∫ (4.82)
193
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Then we substitute for the integral (∫ ) (∫ ) ( عان التكامال4.81) ثام نعاوت فاي المعادلاة
given in equation (4.82) into equation (4.81) to : ( فنحصل على4.82) من المعادلة
obtain:
ΣFx = ρ2 A2 - ρ1 A1 (4.83)
We also write equation (4.83) in terms of the ( بداللااة معاادل الجريااان4.83) و كااذلك نعااوت فااي المعادلااة
mass flow rate G G الكتلي
G = ρ1 A1 = ρ2 A2
ΣFx = G =G (4.84)
̅̅̅̅ ̅̅̅̅
Substituting ( ) by ( ), where β is the هاوβ ( بالمقادار ) ( حيات ) وباالتعويت عان المقادار
correction factor, taking the value for laminar للجرياااان االنسااايابي فاااي معامااال تصاااحيي الااازخم مقاااداري
flow and about 1 for turbulent flow. The symbol االنباااوث وزهااااء الواحاااد للجرياااان اال اااطرابي و ضن ̅ هاااي
̅ denotes the average velocity. The تصبي معادلة الزخم للجريان المستقر, متوسط سرعة الجريان
momentum equation for one dimensional : ببعد واحد
steady flow will therefore be:
ΣFx = ( ) (4.85)
194
FLOW OF FLUIDS 4 الموائع في حالة الجريان
4.11 Euler equation – Bernoulli equation – اشدددتقاع معادلدددة برندددولي علددد معادلدددة أيدددولر4.44
based on Euler equation معادلة الحخ أسا
We can derive the Bernoulli equation by يمكااان اشاااتقاق معادلاااة برناااولي علاااى اسااااا تغيااارات الااازخم
considering changes in momentum and : بافترات ان
assuming:
المنظومة ال تنجز شغال-
- no external work done
ان الجريان ببعد واحد-
- one dimensional flow
( α =1) جريان منتظم عبر المقطا العر ي للمجرص ضم ضن-
- uniform flow across the section of the flow (β =1) و
channel, therefore ( α =1) and (β =1)
ضم تهماال قااوص القااا الناجمااة عاان, جريددان بدددون ااتكدداك-
- inviscid flow, thus ignoring shear forces due to االحتكاك
friction
Let us consider now a small element of a ومسااااحةdx واالن نتخاااذ جسااايما مااان انبوبدددة انسدددياب طولاااس
stream tube having length dx and cross section ) التي تزداد دلى1( في النقطةdA مقطعس
area dA at point (1) which increases to ( )
) كما هو مبين في2( ( في النقطةdA + dx)
( )
(dA + dx) at point (2), as illustrated in
.4.9 الشكل
Fig 4.9.
(2)
dx
-FxP2
(1)
- Fxg Fyg
dz
FxP1
θ
Fg
Fig 4.9 Forces acting on an element القوص المؤثرة في جسيم المانا4.4 الشكل
195
FLOW OF FLUIDS 4 الموائع في حالة الجريان
We apply the momentum equation to the : نطبق معادلة الزخم على ضنبوبة ا نسياث
stream tube:
We assume that the flow is inviscid and ام,نهمل قوص القا باعتبار الجريان خاليا من االاتكاك
therefore we can ignore the shear forces, to
write
Fxs = 0
We have a pressure force acting on the element ( وقاوة تعاكساهاFxP1) ولدينا قوة غط تؤثر في الجسايم هاي
FxP1 and one acting in the opposite direction (-Fxp2) باالتجاي
-FxP2
The net pressure force will be: : اآلن صافي قو الضغط هو
FxP = FxP1 - Fxp2
( )
FxP2 = (P + dx) (dA + dx ) (4.86)
( )
∴ FxP = P . dA – [ (P + dx) (dA + dx)] (4.87)
196
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Fg = m.g = ρ V g
( )
Fg = g ρ (dA + dx) dx
( )
∴ - Fxg = - g ρ dx ( + dx ) (4.88)
In addition to the pressure forces acting on the وا افة دلى قوص ال غط المؤثرة في نهايتي حجم التحكم هنالك
ends of the control volume, there is a force التي يؤثر بها المانا فيPm القوة الناجمة عن متوسط الضغط
arising from the mean pressure Pm of the fluid جوانث حجم التحكم والتي لهاا مركباة باتجااي الجرياان هاي
acting on the sides. This force has a component : مقدارها, (Fx Pm)
(Fx Pm) in the flow direction, which is given by:
( )
Fx Pm = (P + dx) ( dx) (4.89)
197
FLOW OF FLUIDS 4 الموائع في حالة الجريان
( ) ( )
ΣFx = P dA - [(P + dx) (dA + dx) ] – g ρ dx ( + dx )
( )
+ (P+ dx ) ( ) (4.90)
( ) ( )
Assuming ( ) is small and therefore its value ( صااغير و يقتاارث ماان الصاافر ) وعلااى ضن المقاادار
approaches zero, equation (4.90) will be ( دلى4.42 ) تختصر المعادلة
reduced to
ΣFx = - dA dx – g ρ A dx (4.91)
Considering that ( β = 1) then the rate of change ضم الطار, ( سيصابي معادل تغيار الازخمβ = 1) وباعتباار
of momentum, which is the right hand side of : ( اآلتي4.45) ا يمن للمعادلة
equation (4.85), will be:
G( )
Substituting the mean velocities and by u1 بمقدار السرعتين و وبالتعويت عن متوسط السرعتين
and u2 we obtain نحصل علىu2 وu1 ) ضم2( ) و1( في النقطتين
G ( u2 – u1)
198
FLOW OF FLUIDS 4 الموائع في حالة الجريان
G ( u2 – u1) = ρ A2 u2 - ρ A1 u1
( )
G ( u2 – u1) = ρ ( dA + dx) (u + dx ) – ρ dA u
G ( u2 – u1) = ρ u dA dx
(- dA dx – g ρ A dx ) = (ρ u dA dx) (4.92)
ΣFx G ( u2 – u1)
or ضو ضن
u + +g =0 (4.93)
Equation (4.93) is called Euler equation. و بمكاملتهاا للجرياان. ( معادلدة ايدولر4.93) وتدعى ا لمعادلاة
Integrating the equation for incompressible : حير االن غاطي نحصل على
flow will give:
+ +gz=C (4.94)
Equation (4.44) is in fact Bernoulli’s equation, ( هااي فااي الواقااا معادلااة4.94) والمعادلااة, هااو مقاادار ثابااتC
where C is a constant. Applying it to two points التاااي تكتاااث عناااد تطبيقهاااا عناااد نقطتاااين فاااي الماااانا, برناااولي
within the fluid will give بالصيغة االتية
199
FLOW OF FLUIDS 4 الموائع في حالة الجريان
+ + g z1 = + + g z2 (4.95)
Note that applying equation (4.95) across two وتجدر االشارة دلى ضن حد الطاقة الحركياة يحتااف دلاى تصاحيي
sections of a flow channel will require ( علاى مقطعاين4.45) عند تطبياق المعادلاةα بادخال المعامل
introducing the correction factor α to the . في الجريان بدال من نقطتين
kinetic energy term.
Example 4.5 “application of the continuity ”"تطبيع معادلة االتصال عل تفرع االنابيب 4.4 مثال
equation to branching pipes”
Oil of density 892 kg/m3 is flowing in a pipe فااي انبااوث قطااري892 kg/m3 يجاارم نفااط خااام كثافتااس
having an internal diameter 5 cm. This pipe is الااذم7.5 cm متصاال بااانبوث اخاار قطااري5 cm الااداخلي
connected to another one with diameter 7.5 cm فااذا كاان3.75 cm بدوري يتفرع دلى انباوبين قطار كال منهاا
which branches into two smaller pipes each one معاادل جريااان الاانفط عنااد ماادخل االنبااوث ا ول يساااوم
having a diameter of 3.75 cm. If the flow rate in : احسث1.388 x 10-3 m3/s
the first pipe is 1.388 x 10-3 m3/s, calculate:
a- The mass flow rate in the first pipe and (ض) معدل الجريان الكتلي في االنبوث ا ول و في فرعي
in the branches of the second pipe. االنبوث الثاني
b- The average velocity in the first pipe (ث) متوساااط السااارعة فاااي االنباااوث ا ول وفاااي فرعاااي
and in the branches of the second pipe. االنبوث الثاني
200
FLOW OF FLUIDS 4 الموائع في حالة الجريان
2
1
Solution الال
Given: :المعلوم
d1 = 5 cm = 0.05 m
d2 = 7.5 cm = 0.075 m
d3 = 3.75 cm = 0.0375 m
Q = 1.388 x 10-3 m3/s
ρ = 892 kg/m3
Find المطلوث
G1, G3, ,
201
FLOW OF FLUIDS 4 الموائع في حالة الجريان
u1 ρ1 A1 = u2 ρ2 A2
The velocity is constant at any section, thus ولما كانت السرعة ثابتة عبر ضم مقطا في المنظومة اذن
u1 =
u2 =
ρ1 = ρ2 = ρ
G1 = u1 ρ 1 = Q1 ρ
G1 = 1.238 kg/s
Applying the mass conversation principles, we : وبتطبيق مبدض حفظ الكتلة يت ي ضن
note that:
G1 = G2 = 2 G3
= G1/ρ A1
= = 0.707 m/s
= = G3/ρ A3
202
FLOW OF FLUIDS 4 الموائع في حالة الجريان
= = 0.628 m/s
Exercise تمرين
How would the results of calculation have كيا ساتتغير نتيجااة الحاال لااو كااان المااانا الجااارم ماااءا؟ ضعااد
changed if the fluid was water? Repeat the . خطوات الحل
calculations accordingly.
Example 4.6 “Total head in a flow system” " "العمود الكلي في منظومة األنابيب4.4 مثال
A petroleum fluid, density 870 kg/m3, is flowing فااي انبااوث قطااري870 kg/m3 يجاارم سااانل نفطااي كثافتااس
in a pipe having internal diameter of 0.2 m. The دلى مسافة معينة ثم يعلو على مساتوص ساطي0.2 m الداخلي
pipe runs for a certain distance and then rises فااذا, 0.5 m حيات يتصال باانبوث آخار قطاري4 m ا رت
4 m above ground level where it is connected to وفاي ا نباوث الثااني1 bar كان ال غط في االنبوث ا ول
a second pipe of diameter 0.5 m. The pressure , 0.2 m3/s وكااان معاادل الجريااان فااي المنظومااة0.6 bar
in the first pipe is 1 bar and in the second ضحسث مقدار الفقدان في العمود الكلي مهمال االحتكاك
0.6 bar. If the flow rate of the fluid is 0.2 m3/s, ثااام عاااين اتجااااي الجرياااان فاااي,ومفتر اااا جرياناااا ا اااطرابيا
calculate the total head loss; neglecting friction .منظومة االنابيث
and assuming turbulent flow. Also, determine
the flow direction in the piping system.
Solution الال
Fig 4.11
4.44 الشكل : المعلوم
Given:
203
FLOW OF FLUIDS 4 الموائع في حالة الجريان
To determine the total head loss and the لحساث مقادار الفقادان فاي العماود المكااف الكلاي وتعياين اتجااي
direction of flow, we first calculate the total وقااد.)2( ) و1( الجرياان نحسااث العماود الكلااي فاي النقطتااين
head between (1) and (2). It was mentioned in ضن العمااود الكلااي هااو ضحااد طرفااي معادلااة4.9 بينااا فااي البنااد
section 4.9 that the total head is one side of :) هو2( فالعمود الكلي في النقطة, برنولي
Bernoulli’s equation, therefore the total head at
(2) will be:
̅
+ z2 +
̅ = Q/A
A1 = 3.141 x 10-2 m2
̅
+ z1 +
204
FLOW OF FLUIDS 4 الموائع في حالة الجريان
̅
Total head (2) = + z2 +
=[ + 4.0 + ]
= 0.0528 + 4 + 7.030
= 11.082 m
Thus the total head loss will be: :ضذن مقدار الفقدان في العمود الكلي هو
Exercise 4.7 “applying the energy equation ""تطبيع معادلة الطاقة عل مرجل بخاري 4.4 مثال
to a steam boiler”
Water enters a steam boiler at an average يدخل الماء في مرجل بخاري بمتوسط سرعة مقدارها
velocity of 1.52 m/s and steam comes out at و يخرف بخار الماء منس, 1.52 m/s
205
FLOW OF FLUIDS 4 الموائع في حالة الجريان
an average velocity of 9.13 m/s. If the outlet فاذا كان انبوث بخاار. 9.14 m/s بمتوسط سرعة قدرها
steam pipe is 15.2 m higher than the inlet جاد مقادار, 15.2 m الماء ضعلى من ضنبوث الماء بارتفاع
water pipe, determine the amount of heat الحرارة الالزم ا افتس لكل كيلاو حارام مان المااء لتحويلاس
required to convert every kilogram of water علماا ضن الجرياان فاي كاال. دلى بخار في حالاة االساتقرار
to steam at steady state. Consider the flow ا نبوبين هو جريان ا طرابي وضن مقادار االنثاالبي للمااء
in both pipes to be turbulent. The enthalpy 2771.4 kJ/kg وللبخار الخارف76.697 kJ/kg الداخل
of water is 76.697 kJ/kg; enthalpy of steam
is 2771.4 kJ/kg.
Solution
الال
(2)
(1) Steam
Water
15.2
Fig 4.12 4.12 mالشكل
Given: :المعلوم
z1 = 0.00 , z2 = 15.2 m
g = 9.81 m/s
206
FLOW OF FLUIDS 4 الموائع في حالة الجريان
a- One dimensional-turbulent flow (α =1) (α =1) (ض) جريان ا طرابي ببعد واحد
b- No work done in the boiler (Ws = 0) (Ws = 0) (ث) ضن المرجل ال ينجز ضم شغل
c- Steady state operation (ت) المنظومة في حالة االستقرار
d- Inviscid flow (friction is negligible) (ت) االحتكاك مهمل
Find: :المطلوث
∆H + g ∆z + ∆ ( ̅ /2α) - q + Ws = 0
Comment مالاظة
Note that the values of the kinetic energy الحظ ضن مقدار كل من الطاقة الحركية والكامنة صاغير مقارناة
and the potential energy are small بالتغيير بمقدار ا نثالبي لذا يمكن اهمالس دون تارثير ملحاوظ فاي
compared to the enthalpy and therefore .الجواث
can be ignored.
207
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Example 4.8 “applying the energy equation " "تطبيع معادلة الطاقة عل منظومة الضخ4.4 مثال
to a pumping system”
Fig 4.13 illustrates a simple pumping system to منظوماة ام مبساطة ل ام مااء كثافتاس4.13 يباين الشاكل
pump water having density 998 kg/m3. ُ احساااث خساااانر االحتكااااك مفتر اااا جرياناااا. 998 kg/m3
Calculate the friction losses assuming steady - علماا ضن قطار انبدوب سداب المداء يسااوم, ا طرابيا مستقرا
turbulent flow. Consider the diameter of the . قطر انبوب دفعه
suction pipe is equal to that of the discharge
pipe.
Ws = - 155.4 J/kg
Z
انبوث السحثSuction
̅ ̅
Pump الم خة
P1 = 68.9 kN/m 2 P2 = 137.8 kN/m2
z2 = 0.0 m z2 = 3.05 m
ρ = 998 kg/m3
g = 9.81 m/s2
d1 = d2
Assumptions االفترا ات
208
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Find: Lf
المطلوث :حساث Lf
We use equation (4.74) which is:
نستخدم معادلة الطاقة بصيغة المعادلة ) (4.74وهي :
∆
∫ + g ∆z + + Ws + L f = 0
α=1
The fluid is incompressible, hence ولما كان المانا هنا مانعا حير ان غاطي لذا
Since (d1 = d2), and for steady flow we have ولم اا كااان ) (d1 = d2والجريااان مسااتقر ام ( ̅ = ̅ )
( ̅ = ̅ ), then: نحصل على :
Work is negative because it is done to operate واالن نعاوت لنحسااث قيمااة , Lfعلماا ضن الشااغل يحماال عالمااة
the pump, and now we can determine Lf by الناااقا النااس مبااذول لتشااغيل الم ااخة ولاايا منجاازا ماان قب ال
substituting the known quantities المنظومة
209
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Lf = - (-155.4) + 0.0 + 9.81 (0.0 – 3.05) + [( 68.9 x 103 – 137 x 103) / 998]
Example 4.9 “applying the momentum " "تطبيع معادلة الحخ عل منفث افقي4.4 مثال
equation to a horizontal nozzle”
من منفدث ضفقاي دلاى103 kg/m3 يتدفق ماء كثافتس
Water with density 103 kg/m3 is discharged كما هو مبين0.0315 m3/s المحيط الجوم بمعدل
from a horizontal nozzle to the surroundings at فااذا كاان القطار ا كبار المتصاال, 4.14 فاي الشاكل
a rate of 0.0315 m3/s, as illustrated in Fig 4.14. والقطر ا صغر للمنفت63.5 mm با نبوث يبلغ
If the larger diameter attached to a pipe is 63.5 ضحسث مقدار القوة المحصلة التاي, 28.6 mm يبلغ
mm in diameter and the smaller one is 28.6 . تؤثر في المنفت
mm, calculate the resultant force acting on the
nozzle.
̅ , ρ2
̅ , ρ1
Water ماء Nozzle منفت
FxP1 - FxP2
Given: :المعلوم
d1 = 0.0635 m
d2 = 0.0286 m
Q = 0.03154 m3/s
ρ = 1000 kg/m3
210
FLOW OF FLUIDS 4 الموائع في حالة الجريان
To determine the resultant force Fxr we assume نفترت انFxr لحساث القوة المحصلة
ΣFx = ( )
β = 1, Fxg = 0 , Fxs = 0
The equation therefore will be reduced to: : لذا تختصر المعادلة دلى
FxP + Fxr = G ( )
∴ FxP = P1 A1 – P2 A2
Where P2 denotes the atmospheric pressure, , هو ال غط الجوم ضم يساوم الصفر ك غط نسبيP2 وهنا
which is equal to zero as gauge pressure. We ) التاي تختصار4.76) باساتخدام المعادلاةP1 ونستطيا حسااث
can now calculate P1 using equation )4.74) : دلى
which will be reduced to:
211
FLOW OF FLUIDS 4 الموائع في حالة الجريان
̅ ̅
+ = +
= Q/A1 = 4Q / πd12
= 4 x 0.03154 / π (0.0635)2
= 9.959 m/s
= 49.095 m/s
Substituting for the two velocities and density نعوت بقيم السرعتين والكثافة
( ) ( )
+ = +
G1 = G2 = ρ Q
FxP + Fxr = G ( )
Fxr = -2427 N
Comment مالاظة
The negative answer indicates that the force لمااا كااان الجااواث يحماال اشااارة الناااقا لااذا نسااتنت ان القااوة
acts along the axis opposing the flow direction. . تؤثر في امتداد خط المحور لكن بعكا اتجاي الجريان
212
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Exercise تمرين
Repeat the calculation of the example using استخدم برنام اال كسل العادة حل المثال معتبرا معدل
Excel and considering a flow rate of 0.0415 m3/s 0.0415 m3/s الجريان
Example 4.10 “applying the momentum " "تطبيع معادلة الحخ عل انية انبوب4.44 مثال
equation to a pipe bend”
The diameter of a 450 pipe-bend decreases عنااد500 mm حنيااة انبااوث يتناااقا قطاار مقطعهااا ماان
from 500 mm at the inlet to 250 mm at the عناااد المخااارف وينحااار اتجااااي250 mm المااادخل دلاااى
outlet. A petroleum liquid with density 850 فاذا كان ال غط عند مدخلها, 450 الجريان فيها بزاوية قدرها
kg/m3 flows through the bend at a rate of 0.45 وضن ساانال نفطيااا23 kN/m2 وعناد مخرجهااا40 kN/m2
m3/s. If the pressure at the inlet is 40 kN/m2 and 0.45 m3/s و بمعدل850 kg/m3 يجرم في ا نبوث كثافتس
at the outlet 23 kN/m2, calculate the resultant احسث مقدار واتجاي القوة المحصلة المؤثرة في الحنياة علماا ان
force acting on the horizontal bend and . الحنية تقا في مستوص ضفقي
determine its direction.
الال
Solution
Fyr
Fr
∅
Fxr
213
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Given: : المعلوم
d1 = 0.5 m
d2 = 0.25 m
θ = 450
P1 = 40 x 103 N/m2
p2 = 23 x 103 N/m2
Q = 0.45 m3/s
ρ = 850 kg/m3
Find: : المطلوث
The resultant force Fr and its direction ∅ ∅ وتعيين اتجاههاFr ايجاد مقدار القوة المحصلة
ΣFx = ( )
y وباالتجاي
The equation in the y direction will be
ΣFy = ( )
214
FLOW OF FLUIDS 4 الموائع في حالة الجريان
β=
FxP + Fxr = G ( )
We will now derive the y direction equation by : y وباتباع نفا الخطوات نوجد معادلة لالتجاي الرضسي
following similar steps:
Fr I =∅√
I tan = +
∅ = tan-1 ( ) (D)
tan ∅ =
∅ = tan-1 ( سنحساث
) (D) ( وA) وبتطبياق المعاادالت
(C) ( وD) ( وB)
By applying equations (A), (B), (C) and (D) we
can determine the force and its direction as :القوة و اتجاهها على النحو اآلتي
follows:
215
FLOW OF FLUIDS 4 الموائع في حالة الجريان
Fxr = (382.5 x 9.168 cos 45) – 2.291 – (40 x103 x 19.634 x 10-2) + (23 x 103 x 4.8 x10-2 cos 45)
Fxr = - 5453.345 N
The minus sign indicates that the force is acting تشير عالمة النااقا دلاى ضن اتجااي تارثير القاوة معااكا التجااي
in the opposite direction to the flow. . الجريان
Fyr = (382.5 x 9.168 sin 45) + (23 x 103 x 4.908 x 10-2 cos 45)
Then we calculate the resultant force Fr using (C) باستخدام المعادلةFr ثم نحسث القوة المحصلة
the equation (C)
I Fr I = √ (545 5 ) +( )
I Fr I = 6362.58 N = 6.362 kN
216
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The direction of the force can be found using (D) ثم نجد اتجاي القوة باستخدام المعادلة
equation (D)
∅ = tan-1
545 4
∅ = 310
217
FLOW OF FLUIDS 4 الموائع في حالة الجريان
218
FLOW OF FLUIDS 4 الموائع في حالة الجريان
219
FLOW OF FLUIDS 4 الموائع في حالة الجريان
The final pressure and temperature, the work مقدار ال غط النهاني ودرجة الحارارة النهانياة ومقادار الشاغل
done, the change in internal energy and the ومقادار التغيار فاي الطاقاة الداخلياة ومقادار الحارارة المنتقلاة
amount of heat transferred for the following : عندما تكون عملية رفا ال غط
compression processes:
a- Isothermal
بثبوت درجة الحرارة-ض
b- Adiabatic
) خالية من التبادل الحرارم ( اديباتية-ث
Cp = 0.92 kJ/kgK
Cv = 0.66 kJ/kgK
Ans. ف
220
FLOW OF FLUIDS 4 الموائع في حالة الجريان
4.3 An incompressible fluid flows at a rate of فاي0.015 m3/s مانا حير ان اغاطي يجارم بمعادل4.4
0.015 m3/s through a pipe AB with a diameter فاااذا كااان االنبااوث متفرعااا عنااد, 0.1 m قطااريAB انبااوث
of 0.1 m. The pipe branches at B to three و0.025 m وقطاريBC هام, دلاى ثالثاة انابياثB النقطة
smaller pipes. These are: BC-diameter 0.02 m, وكان معادل0.05 m , قطريBE و0.025 m قطريBD
BD-diameter 0.025 m and BE-diameter 0.05 m. يساوم ثالثة ا عا معدل الجريانBC الجريان في االنبوث
If the flow rate in BC is three times the flow rate 4 m/s يساااومBD ومقاادار متوسااط الساارعة فااي, BE فااي
in BE, and the average velocity in BD is 4 m/s, احسث مقدار معدل الجريان في الفروع الثالثة ثم جاد السارعة
calculate the flow rate in the three branches . BE وBC وAB في
and determine the velocity in AB , BC, and BE.
Ans. ف
4.4 Two liquids enter a closed mixing tank يستخدم خزان مغلق لخلط سانلين يادخالن خاالل انباوبين4.4
through pipes A and B, and the mixture exits فااذا كاان. C ويخارف المازي خاالل ا نباوثB وA هماا
through pipe C. A liquid with density 930 kg/m3 حيات يجارم فياس ماانا كثافتاس0.13 m مسااوياA قطار
flows through A, diameter 0.13 m, at a rate of مساوياB وكان قطر. 0.052 m3/s بمعدل930 kg/m3
0.052 m3/s. Another liquid with density 870 بمعادل870 kg/m3 ويجرم فيس مانا اخار كثافتاس0.08 m
kg/m3 flows through B, diameter 0.08 m, at a . 0.175 m يسااومC وكاان قطار االنباوث0.03 m3/s
rate of 0.03 m3/s. If the diameter of C is 0.175 ضحسث معدل الجريان الكتلي ومتوساط السارعة وكثافاة الساانل
m, determine the mass flow rate, the average . C في االنبوث
velocity and the density of the liquid in pipe C.
4.5 Steam enters a turbine at an average يدخل بخار الماء دلى توربين بمتوسط سرعة قادري4.4
velocity of 16 m/s and enthalpy 2990 kJ/kg. It ويخاارف مناااس بسااارعة2990 kJ/kg و ضنثااالبي16 m/s
exits the turbine at a velocity of 37 m/s and فااااذا كانااات الحااارارة2530 kJ/kg وانثاااالبي37 m/s
enthalpy 2530 kJ/kg. If the heat lost to the وكاان معادل جرياان البخاار25 kJ/kg المتسربة دلى المحايط
surroundings is 25 kJ/kg and the flow rate of . احسث مقدار الشغل الذم ينجزي التوربين, 90 kg/s
steam 90 kg/s, calculate the work done by the
turbine.
Ans. ف
434.434 kJ/kg
221
FLOW OF FLUIDS 4 الموائع في حالة الجريان
4.6 A tank contains liquid at a depth h above a في جدران خزانA توجد فتحة دانرية مساحة مقطعها4.4
circular opening in its wall. The side opening ضثباات ضن معاادل. فااوق مركااز الفتحااةh يحتااوم سااانال بعمااق
has a cross section area A. Show that the : هوQ الجريان الحجمي للسانل المتدفق من الفتحة
volumetric flow rate of the liquid discharged
from the opening is given by:
Q=A√
4.7 Water is discharged from an opening in a يتدفق الماء من فتحة موجاودة فاي جادران خازان قطرهاا4.7
tank wall. The diameter of the opening is فااذا بقاي ارتفااع المااء9.4 m/s وبسارعة قادرها40 mm
40 mm and the velocity of the water is 9.4 m/s. احساث مقادار القاوة التاي يساببها1.55 m فوق مركز القتحاة
If the water height above the opening remains . 103 kg/m3 تدفق الماء من الخزان علما ضن كثافة الماء
at 1.55 m, estimate the force caused by the
discharged water of density is 103 kg/m3.
(Note: apply the control volume concept to the ) يستخدم حجم التحكم للماء المتدفق خارف الخزان: ( مالحظة
water discharged from the tank)
4.8 Water of density 103 kg/m3 is flowing in a فاي ضنباوث طولاس103 kg/m3 يجارم مااء كثافتاس4.4
30 m long pipe. The pipe is laid with a slope of حياات يتناااقا مقطااا5.7390 منحاادر بزاويااة قاادرها30 m
5.7390; its cross section decreases from a فاااذا كااان مقاادار, 0.3 m دلااى0.75 m ا نبااوث ماان قطاار
diameter of 0.75m to 0.3m. If the average وال اغط فاي4.5 m/s متوساط السارعة فاي النهاياة السافلى
velocity in the lower smaller end is 4.5 m/s and احسااث مقاادار ال ااغط فااي النهايااة, 1 bar النهايااة العليااا
the pressure in the upper end is 1 bar, calculate الساااافلى لبنبااااوث مفتر ااااا جريانااااا ا ااااطرابيا و خاليااااا ماااان
the pressure in the lower end. Assume inviscid - . االحتكاك
turbulent flow.
Ans. ف
1.195 bar
222
FLOW OF FLUIDS 4 الموائع في حالة الجريان
4.9 Water of density 103 kg/m3 flows in يجرم فيس مااء كثافتاس0.35 m انبوث قطري4.9
a pipe having a diameter 0.35 m. The pipe is 1.962 bar وتحات اغط3.1 m/s بسارعة103 kg/m3
inclined horizontally at 450; if the velocity of the احسث مقدار و اتجاي450 فاذا كان االنبوث منحرفا افقيا بزاوية
water is 3.1 m/s and the pressure inside the . القوة المحصلة
pipe is 1.962 bar, determine the resultant force
and find its direction.
4.10 Oil of density 940 kg/m3 flows in a pipe 322 ينعطا ضفقياا بزاوياة قادرها1 m ضنباوث قطاري4.44
having a diameter of 1 m at a rate of 2 m3/s. If فااذا, 2 m3/s بمعادل940 kg/m3 يجارم فياس نفاط كثافتاس
the pressure in the elbow is constant at 75 kPa, وكااان حجاام75 kPa كااان ال ااغط فااي الانيددة ثابتااا بمقاادار
the volume of the elbow is 1.2 m3 and the فمااا مقاادار4 kN و ثقاال معاادن الحنيااة1.2 m3 الحنيااة
weight of the elbow is 4 kN, what will be the . القوص المؤثرة باالتجاهات الثالثة المتعامدة
value of the forces acting in the three
perpendicular directions.
Ans. ف
4.11.2 Application of the continuity equation in تطبيق معادلة االتصال في تصميم شبكات مياي الشرث4.44.4
the design of a drinking water network
اام لسااانل نفطااي تقااويم خسااانر الطاقااس فااي منظومااة4.44.4
4.11.3 Estimation of energy losses in a pumping باستخدام اكسل
unit using Excel
تطبياااق معادلاااة الااازخم فاااي تصاااميم منفثاااات الهاااواء4.44.4
4.11.4 Using the momentum equation to الم غوط
design compressed air nozzles
223
FLOW IN PIPES 5 الجريان في االنابيب
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Discuss the difference between laminar and اليرلةةةةان مناقشةةةةة الفةةةةرج بةةةةلن اليرلةةةةان ال بةةةةاق.1
turbulent flow االض راب
2. Understand the formation of the boundary فهم رلقة نش ء ال بقة المتاخمة.2
layer
3. Identify Newtonian and Non-Newtonian flow تشخلص اليرلان النل ت ن اليرلان غلر النل ت ن .3
4. Estimate friction losses in pipes and fittings تق لم خسائر االحتكاك ف االنابلب ف ق ع التركلب .4
5. Conduct calculations for incompressible flow in ايراء حسابات تخص اليرلةان غلةر االنضةيا فة .5
a pipe network شبكات االنابلب
تقدلر خسائر ال اقة ف القن ات غلر الدائرلة .6
6. Compute the energy losses in non-circular
conduits
الضي ليرلان مائع غلر نل ت ن حساب هب.7
7. Calculate the pressure drop for non-Newtonian
fluid flow
224
FLOW IN PIPES 5 الجريان في االنابيب
225
FLOW IN PIPES 5 الجريان في االنابيب
The flow regime changes can be observed by لمكةن مشةةاهدة نم ة اليرلةةان بةةايراء التيربةةة التة قةةام بهةةا
conducting Reynolds’ experiment as shown in العالم رينولدز المبلنة ف الشكل . 5.1
Fig 5.1.
Dye
صبية
Water
ماء
Laminar flow
يرلان باق
Mixing Transition flow
تشتت الصبية يرلان انتقال
Turbulent flow
يرلان اض راب
Water is supplied from a tank through a glass ليهز الماء من خزان ىل االنب ب الزياي الذي لمكن الةتحكم
tube. The water flow is regulated by a valve and فلةةا ب اس ة ة صةةمام مثبةةت ف ة نهالتةةا لضةةاإ ىللةةا قللةةل مةةن
a dye is injected into the stream. For low flow السائل المل ن .فاذا كةان اليرلةان ب لئةا سةلالحة بقةاء الصةبية
rates, the dye remains as a well-defined line, عل شكل خل رفلع د ن امتزايها بالمةاء ممةا لةدل علة كة ن
indicating laminar flow. As the velocity is اليرلان انسلابلا ,أما اذا زلةدت سةرعة اليرلةان ىلة حةد معةلن
increased, the dye starts to get mixed with the عةةن رلةةج الةةتحكم بفتحةةة الصةةمام فسلتشةةتت الخةةل المل ة ن
water indicating the onset of turbulence. The لمتةةزب بالمةةاء مشةةلرا ن ىل ة نش ة ء االض ة راب ف ة اليرلةةان .
velocity at which the flow changes from laminar تسةةم السةةرعة الت ة لتيلةةر عنةةدها اليرلةةان مةةن انسةةلاب ىل ة
اضةةة راب السلللراة الحرجلللة .قةةةد تبةةةلن مةةةن الدراسةةةات ان
to turbulent is known as the critical velocity.
التح ل ف نم اليرلان لعتمد عل مجمواة غير بعدية تسم
Experiments show that the change in flow
رقم رينولدز ,لرمز لها Reالت تيمع بلن خة اص المةائع
regime is determined by the value of a non-
السرعة ق ر ا نب ب بالصلية :
dimensional group known as the Reynolds
number denoted as Re; defined as:
= Re )(5.1
226
FLOW IN PIPES 5 الجريان في االنابيب
If the Reynolds number value is less than 2100, سةةةلك ن2122 فةةةاذا كانةةةت قلمةةةة رقةةةم رلن لةةةدز أصةةةير مةةةن
then the flow inside a pipe will be streamline. أمةا اذا كةان رقةم رلن لةدز اكبةر. اليرلان ف ا نب ب أنسلابيا
However if the value is greater than 4000, then 2122 للقلمةةة البلنةةة. لصةةبا اليرلةةان اضللطرابيا4222 مةةن
the flow will be turbulent. For the value لك ة ن اليرلةةان ف ة حالةةة التح ة ل مةةن انسةةلاب ىل ة4222 ىلة
between 2100 and 4000, the flow will be أن اليرلةان االضة راب هة. اض راب اي جريلا انتقلالي
changing from streamline to turbulent, and it is حلةث لسةاعد علة, ا كثر أهملة فة ميةال الهندسةة الكلملائلةة
called transition flow. Turbulent flow is most كةذلك هة ا كثةر شةل عا فة المسةائل, مزب الس ائل اليارلة
common in engineering, and it is particularly ف لحةةux تيلرات السرعة5.2 ل ضا الشكل. الهندسلة
important in the field of chemical engineering حلةث, عند نق ةة فة اليرلةان االضة رابx معلنة باالتيا
where it helps to enhance the mixing of flowing قةد. ̅ ه مقةدار التلراو حة ل المعةدل الزمنة للسةرعةu’
fluids. Fig 5.2 illustrates the fluctuations of . ألضاz y تحصل تقلبات أ ترا ح ف السرعة با تياهلن
velocity at a given time, in the x direction and at
a specified point of turbulent flow. In the
diagram, u’ denotes the fluctuations in velocity
around the time-averaged value ̅ . Some
variations in velocity may occur in the y and z
directions as well.
ux = ̅ + u’ (5.1A)
u’
ux
Fig 5.2 Velocity fluctuations for turbulent flow ترا ح السرعة ف اليرلان االض راب5.5 الشكل
We will study turbulence in detail in chapter 11. . ستدرس حالة االض راب تفصلال ف الفصل الحادي عشر
227
FLOW IN PIPES 5 الجريان في االنابيب
̅
Re = ̅
̅
Re =
If the inertia forces increase, relative to the فاذا ازداد مقدار قة القصة ر الةذات نسةبة ىلة القة اللزيةة
viscous forces, then the flow approaches the لقتةةرب اليرلةةان ىلةة حالةةة االضةة راب بعكسةةا لقتةةرب مةةن
state of turbulence; meanwhile, the opposite هةةذا لفسةةر حقلقةةة ان اليرلةةان االنسةةلاب ا ال بةةاق, الهةةد ء
will make the flow calmer approaching لسم احلانةا الجريلا الللز حلةث عنةدما لكة ن رقةم رلن لةدز
streamline conditions. When the value of the . تك ن ق اللز ية ه ا كثر ت ثلرا2122 أقل من
Reynolds number is less than 2100, the viscous
forces will be more effective, and the
streamline or laminar flow is called viscous
flow.
228
FLOW IN PIPES 5 الجريان في االنابيب
المنطقة االضطرابية
u∞ Turbulent region u = 0.99 u∞
منطققة التحول
y Transition
المنطقة الطباقية
Laminar layer
δ
x
صفيحة
حافة الصفيحة A plate
Let us assume that the velocity of the fluid at a عنةةد نق ةةةx باالتيةةاux فلنفتةرض ان سةةرعة المةةائع هة
vertical distance y from the surface in the مةن الصةفرux من الس ا باالتيا المعامةد سةتزدادy تبعد
direction x is ux. At a point where (y = 0) the عنةد بعةد معةلنu∞ ( ىلة سةرعة الميةرy = 0) عندما لك ن
velocity will be zero, however at a certain (x1, x2,...) لة قلسةت السةرعة فة نقةا تبعةد. مةن السة ا
distance from the surface it will approach the الةذي تقتةةرب عنةةدy عةن حافةةة الصةفلحة سةةلالحة ان البعةد
stream velocity u∞. If the velocity is measured at . x لزداد بازدلادu∞ السرعة ىل
different distances x1,x2.. from the leading edge
of the plate, then the distance y, where the
velocity is approaching u∞, will increase with x.
229
FLOW IN PIPES 5 الجريان في االنابيب
Now, if we draw a line passing through the ل رسمنا خ ا عل النقا الت قلست عنةدها السةرعة سةلنت
different points where the velocity is measured, أحةةداهما, من قتةةان متملزتةةان لليرلةةان فة ج س ة ح الصةةفلحة
we will notice two distinct flow areas close to تسةم الطبقلة, محاذلة للس ا تك ن سرعة المائع فلها متيلةرة
the surface. One is adjacent to the surface with ا خةةر تعل ة الخ ة الفاصةةل تك ة ن السةةرعة فلهةةا,المتاخمللة
variable fluid velocity, known as the boundary فة. علة يةا التقرلةبu∞ مسةا لة سةرعة اليرلةان الثابتةة
layer, and the other is above the line, having الم ضةةا فة الشةةكلδ اقةةع الحةةال ان سةةمك ال بقةةة المتاخمةةة
constant velocity approaching u∞. In reality, the اللمكةن تحدلةد بدقةة عاللةة اال انةا لتخةذ عةادة حةلن تصةبا5.3
width of the boundary layer δ indicated in Fig ( 0.99 u∞) السرعة مسا لة
5.3 is difficult to define and usually taken at a
velocity value equal to (0.99 u∞)
Due to the effect of shear stresses, and hence ازاء السة ا بالتةال قلوى القل لت ثلرات اجهلادا القل
shear forces that change in value according to x, , عن حافة الصفلحةx الت تتيلر حسب البعد, المالمس للمائع
the flow near the edge remains laminar and لك ن نم اليرلان باقلا قرب الحافة لتح ل ىل اضة راب
changes to turbulent at a certain distance. يدت من قةة صةيلرة تقةع ضةمن. عند بعد معلن من الحافة
However, a small area within the turbulent من قةةةة اليرلةةةان االضةةة راب تحةةةتفة ب بلعةةةة باقلةةةة تسةةةم
region is found to maintain the laminar nature تعتمد نق ة التحة ل مةن بةاق ىلة. الطبقة التحتية الطباقية
and is known as the laminar sub-layer. The باالضافة, اض راب ف ال بقة المتاخمة عل خشونة السطح
change from laminar to turbulent depends on محل ق ةرx حلث لحل البعد. ال قلمة معلنة لرقم رلن لدز
the surface roughness as well as on a certain . )5.1 ف المعادلةd االنب ب
value of the Reynolds number. Here, the
distance x replaces the diameter d in calculating
Re using equation (5.1).
Boundary layer analysis will be covered in more سنبحث تحللالت ال بقة المتاخمةة تفصةلال فة الفصةل الحةادي
detail in chapter 11. . عشر
230
FLOW IN PIPES 5 الجريان في االنابيب
does not apply to the flow at the entrance ذلك لنش ء ال بقة المتاخمة الت لزداد سمكها من الصةفر عنةد
region of the pipe. This is due to the formation نق ة الدخ ل ليالة أقص سمك مسا نصإ ق ر االنبة ب فة
of the boundary layer whose thickness will تبةةةدأ الطبقلللة المتاخملللة الطباقيلللة. نق ةةةة مةةةا فةةة االنبةةة ب
increase from zero to a maximum value equal الت ة قةةد تتح ة ل ىل ة طبقللة متخامللة اضللطرابية, بالنش ة ء أ ال
to the diameter of the pipe at a certain distance اذا كةةان. حسةةب ت ة ثلر ق ة اللز يةةة ق ة القص ة ر الةةذات
from the leading edge. The laminar boundary اليرلان باقلا ف االنب ب فسةتبق ال بقةة المتاخمةة مةن النة ع
layer starts to form first, and, depending on the فسةتت ل2122 أمةا اذا كةان رقةم رلن لةدز لزلةد علة, ال باق
effects of viscous and inertia forces, it may 5.4 ال بقة اض رابلة كما ه مبلن ف الشكل
change to a turbulent boundary layer. If the
flow is laminar, then the layer will remain
laminar. However if the Reynolds number
exceeds 2011, then the layer will change to
turbulent, as illustrated in Fig 5.4
Fig 5.4 Formation of boundary layer in a pipe نش ء ال بقة المتاخمة ف االنب ب5.5 الشكل
After the formation of the boundary layer, the بعةةد اكتمةةال ال بقةةة المتاخمةةة تثبةةت ةةةر إ اليرلةةان فلعةةد
flow becomes fully developed and there will be اليرلان جريانا تام التكوي الذي لتصإ بمنحن ت زلع سةرعة
no change in the prevailing conditions. The flow فمةةثال ه ة, لعتمةةد شةةكل المنحن ة علة ن ة ع اليرلةةان, معةةلن
now takes a specific velocity distribution curve; 5.4 انةر الشكل, منحي مكافيء القطع لليرلان االنسلاب
the shape of curve depends on the flow regime.
For example, for laminar flow the shape will be
that of a parabola, see Fig 5.4
231
FLOW IN PIPES 5 الجريان في االنابيب
The theoretical distance at which the boundary نةرلةةا لعةةد البعةةد الةةذي تتكامةةل عنةةد ال بقةةة المتاخمةةة مسةةا لا
layer is fully developed is equal to infinity; مةةةرة لق ةةةر122 اال انةةةا لمكةةةن عةةةد مسةةةا لا ىلةةة,ماالنهايلللة
however, for laminar flow, it is considered to be مةرة لق ةر62 ىلة, ) لليرلةان ال بةاق120 x d االنبة ب
120 times the diameter of the pipe (120 x d). لسم هةذا البعةد. ) لليرلان االض راب60 x d االنب ب
For turbulent flow it is 60 times the diameter بالمئةة مةن السةرعة99 طول المدخل حلث تبلةغ السةرعة عنةد
(60 x d). At this distance, known as the entry . القص ف نق ة عل امتداد خ مركز االنب ب
length, the velocity along the centre line of the
pipe will be equal to 99% of its maximum value.
commonly classified as Newtonian and Non- فةةةالم ائع, ) التةةة تنشةةة اثنةةةاء اليرلةةةان معةةةدل القةةةص
Newtonian fluids. Newtonian fluids obey : )2.7 النل ت نلة تتبع قان ن نل تن للز ية الممثل بمعادلة
Newton’s law for viscosity defined by equation
(2.7):
τ= - µ
The relationship indicates a straight line ه معادلة خ مستقلم لمر ف نق ة تقةا ع االحةداث الرأسة
equation passing through the intersection of مةن ال اضةا ان اللز يةة فة المعادلةة. مةع االحةداث ا فقة
the vertical axis with the horizontal axis. Clearly, لكنهةةا, اعةةال ثابتةةة المقةةدار أي ال تت ة ثر بتيلةةر معةةدل القةةص
the viscosity in the above equation is not تشةةمل الم ائةةع النل ت نلةةة. تتةة ثر بدريةةة الحةةرارة الضةةي
affected by the shear rate and is considered ف ال اقةع ت يةد, اليازات الس ائل منخفضة ال زن اليرلئ
constant; however, it is influenced by
س ة ائل مهمةةة اخةةر مثةةل المحاليللل السللوائل االيللة الللوز
المسلتحلبا المزيج المعلق الجزيئي المواد الغروانية
temperature and pressure. The common
هةةةذ تسةةةلك سةةةل كا غلرنل تةةة ن اثنةةةاء اليرلةةةان حلةةةث تتيلةةةر
Newtonian fluids include gases and low
ان اعةا مختلفةة5.5 لبةلن الشةكل. لز يتها مةع معةدل القةص
molecular weight liquids. In fact, there are
مائعا ن غلر نل ت ن تتناقصD من الم ائع حلث لمثل المنحن
other common liquids considered as Non-
. لز يتا بازدلاد معدل القص اثناء اليرلان المستقر
Newtonian fluids, such as solutions, high
molecular weight liquids, colloids, suspensions
and emulsions. The viscosity of these flowing
liquids varies with the change in shear rate.
Different types are shown in Fig 5.5 where
Curve D depicts Non-Newtonian fluids whose
viscosity decreases as the shear rate increases.
232
FLOW IN PIPES 5 الجريان في االنابيب
Curve C represents a fluid whose viscosity , فلمثل مائعا تزداد لز يتا بازدلاد معدل القصC أما المنحن
increases as the shear rate increases. The two : لمكن تمثلل سل ك كال المائعلن بمعادلة ذات ق ات يبرلة
curves could follow the power equation:
τ = - K’ ( )n (5.2)
Fig 5.5 Shear stress Vs Shear rate العالقة بلن ايهاد القص معدل القص5.5 الشكل
where K’ is the consistency factor and the value عن مد شذ ذn تعبر قلمة, معامل التجانسK’ اذ لدع
of n indicates the degree of deviation from the المةةائع عةةن السةةل ك النل ت ة ن ه ة لتخةةذ قلمةةا أكبةةر مةةن احةةد
Newtonian behavior. It takes a value greater فلمةةا, الةةذي لمثةةل مة اد مثةةل المةةزل المعلةةج, C للمنحنة
than one in curve C, which represents fluids . الذي لمثل م اد مثل الب للمراتD اصير من احد للمنحن
such as suspensions, and a value less than one
in curve D representing fluids such as polymers.
233
FLOW IN PIPES 5 الجريان في االنابيب
Some fluids behave differently from Newtonian هنةةاك م ائةةع تختلةةإ عةةن الم ائةةع النل ت نلةةة مةةن حلةةث انهةةا ال
fluids. These fluids are represented by curves تتبةةع العالقةةة الخ لةةة بةةلن االيهةةاد معةةدل القةةص انمةةا تتبةةع
that do not pass through the intersection of the هة ب بلعتهةةا, منحنلةةات ال تمةةر فة نق ةةة تقةةا ع االحةةداثلات
two axes. They will not follow the linear صةةةلبة مةةةالم لصةةةل االيهةةةاد ىلةةة مقةةةدار معةةةلن لسةةةم اجهلللاد
relationship between shear stress and shear تعرإ هذ, الخضوع عندئذ تسلك سل ك مائع غلر نل ت ن
rate. They are solid in nature, unless the yield B لمثل المنحلان. الم ائع باللدائ اللزجة أ لدائ بنكهام
stress approaches a certain value where they مةةة اد مةةةن نةةة ع اللةةةدائن اللزيةةةة مثةةةل بعةةةض االصةةةباC
start to follow the Non-Newtonian behavior. ل يةد صةنإ مةن الم ائةع,الصاب ن اجينة الورق غلرهةا
These fluids are known as viscoplastics or غلر النل ت نلة لختلإ عما ذكرنا حلةث تتة ثر لز يتهةا بةالزمن
Bingham’s plastics. The curves B and C depict فةةاذا حةةدث تنةةاقص ف ة, تسةةم موائللع تعتمللد الللن الللزم
these types of fluids; examples include some اللز ية مع الزمن اثناء تسلل القص لدع المائع مائع تسليلي
paints, soap and pulp and other materials. The مثةال, لكن ليب ان لعة د لحالتةا ال بلعلةة بعةد ز ال القةص
viscosity of some Non-Newtonian fluids is . ذلك بعص المحاليل المتبلمرة بعض الم اد اليذائلة
affected by time; these are known as time
dependent fluids. If the viscosity decreases Shear stress
with time and the fluid returns to its initial Newtonian fluid
natural state after the shear effect is
diminished, then the fluid is referred to as
thixotropic. Examples of these fluids are
polymer solutions and some foodstuff. Shear rate
5.4 Pressure drop estimation for a تقويم هبوط الضغط لمائع نيوتوني5.5
Newtonian fluid
5.4.1 Pressure drop & friction factor هبوط الضغط ومعامل االحتكاك5.5.5
The fluid is pushed to flow inside a pipe by the ل ة, لنةةدفع المةةائع ف ة ا نب ة ب بسةةبب الضةةي المسةةل عللةةا
force of pressure. However, if the pressure is قسنا مقدار ضي المةائع علة امتةداد االنبة ب ل يةدنا لتنةاقص
measured along the pipe, it will be noticed that لع ة د سةةبب التنةةاقص ىل ة, كلمةةا ابتعةةدنا عةةن مصةةدر الضةةي
its value will decrease as the fluid moves away لةةة. أ المقا مةةةة التةةة تبةةةدلها يةةةدران ا نبةةة ب, االحتكلللاك
from the pressure source in the flow direction. لخةرب منةاP1 لدخلةا المةائع بضةي مقةدارl اعتبرنةا ة ال
The reason for the pressure drop is the فمةةن ال اضةةا ان مقةةدار الهبللوط فللي الضللغط, P2 بضةةي
existence of friction or the development of a : لسا ي الفرج بلن الضي لن اي ان
resistance to flow by the pipe wall. If the fluid
enters a length of the pipe l at a pressure P1 and
exits at P2, then the pressure drop will be:
- ∆Pf = P1 - P2 (5.3)
234
FLOW IN PIPES 5 الجريان في االنابيب
Here we have - ∆Pf denoting the pressure drop , الضي بسبب االحتكاك مقدار هب- ∆Pf حلث لمثل
due to friction. The minus sign in equation (5.3) ( ىلةةة أن الضةةةي5.3) تشةةةلر عالمةةةة النةةةاقص فةةة المعادلةةةة
indicates the pressure is decreasing in the flow ل ة ت ملنةةا يةةزءا قصةةلرا مةةن. لتنةةاقص باتيةةا يرلةةان المةةائع
direction. For a small portion of the pipe having الت تسا ي, ف ن ق ة االحتكاكd ق رdl االنب ب لا
length dl and diameter d, the friction force will ف المساحة الس حلة لالنب بτ حاصل ضرب ايهاد القص
produce pressure change (-dPf). This force is , ) -dPf ( تسةةةبب تيلةةةرا فةةة الضةةةي مقةةةدارπd. dl)
given by the product of shear stress τ and بتسا ي ق ت االحتكاك هب الضي نحصل عل
surface area of the pipe (πd. dl). Equating the
pressure force to the friction force, we get
∴ - dPf = 4 τ ( ) (5.5)
Equation (5.5) can be modified by introducing ( بادخةال معاملل االحتكلاك فاننلك5.5) لمكن تح لر المعادلةة
the Fanning friction factor, which is defined for المعةةةرإ االضةةة راب الةةةذي لسةةةتخدم لليرلةةةان االنسةةةلاب
laminar and turbulent flow through the بالمعادلة
relationship
f= (5.6)
̅
Now, we substitute for τ in equation (5.5) to فنحصةةلf ( الدخةةال5.5) ف ة المعادلةةةτ اآلن نعة ض عةةن
include f to get: : عل
- dPf = 4f ̅ (5.7)
The pressure drop in the whole length of the الضةةةي فةةة ( نحصةةةل علةةة هبةةة5.7) بمكاملةةةة المعادلةةةة
pipe will be obtained by Integrating equation : أي ان, ا نب ب باكملا
(5.7), hence:
235
FLOW IN PIPES 5 الجريان في االنابيب
̅
- ∆Pf = 4f (5.8)
Since the energy loss due to friction Lf is equal تسا يLf لما كانت ال اقة المفق دة بسبب االحتكاك
∆ ∆
to ( ), then we can estimate the friction ) لذا لمكن حساب خسائر االحتكةاك فة ا نبة ب لكةل
losses per kilogram of fluid as follows كلل غرام احد من المائع كاآلت
̅
Lf = 4f (5.9)
It is also possible to calculate the pressure drop الضي بصلية امود الضغط لمكن ألضا حساب مقدار هب
as pressure head hf by منhf
∆ ̅
hf = ( ) = 4f (5.10)
It is worth noting that we can use the Hagen- تيدر المالحةة هنةا بامكةان اسةتخدام معادلةة هلاك – بوزيلل
Poiseuille equation to evaluate the pressure لحساب هب الضي ف ا نابلب لليرلان ا نسلاب فقة التة
drop for laminar flow in pipes. The equation will . سل ت ذكرها اشتقاقها ف الفقرة المتعلقة بت زلع السرعة
be developed in the section regarding the
velocity distribution.
236
FLOW IN PIPES 5 الجريان في االنابيب
They used the friction factor, different from the قةةد اسةةتخدم ا معامةةل االحتكةةاك لختلةةإ عةةن معامةةل احتكةةاك
Fanning factor, denoted ∅ and defined by the : ه ∅ المعرإ بالمعادلة اآلتلة, فانتك
following equation:
∅= (5.11)
̅
∴ f= 2∅ (5.12)
Prior to that, Hagen (1839) and other scientists مةةن بعةةد علمةةاء كثلةةر ن1339 قبةةل ذلةةك قةةام هللاك فةة
after him conducted many experiments بتيةةارب تخةةص اليرلةةان غلةةر االنضةةيا فة أنابيل ملسللاء
involving incompressible flow in smooth pipes. حصل ا عل خ بلان احد لمثل عالقة بلن معامل االحتكاك
They developed a single-line graph depicting أحةدهما, لةهر الخ البلان بثالثة ايةزاء. رقم رلن لدf
friction factor f as a function of the Reynolds ) ثم لللا من قة التح لRe < 2122 لمثل اليرلان االنسلاب
number. The graph, shown in Fig 5.5, consists ( كمةا لتضةا فةRe > 4000) ثم يةزء اليرلةان االضة راب
of three parts, one segment represents laminar . 5.6 الشكل
flow (Re < 2100), the second one is the
transition region and the third is the turbulent
flow (Re > 4000).
10-0
Log scale
f
Laminar
10-1 f = 16/Re
Transition
Turbulent region
10-2
10-3
102 103 104 105 106
Re
Fig 5.6 Friction factor vs Reynolds number for العالقة بلن معامةل االحتكةاك رقةم رلن لةدز لمةائع5.5 الشكل
an incompressible-Newtonian fluid نل ت ن غلر انضيا
237
FLOW IN PIPES 5 الجريان في االنابيب
The result of Stanton and Panel for laminar flow أمةةا نتةةائ سةةتانت ن بانلةةل فقةةد اةهةةرت خ ةةا احةةدا لليرلةةان
in any pipe produced a single line. This indicates االنسلاب ي أنب ب مما لدل عل ان معامةل االحتكةاك ∅ لةن
that for laminar flow, the friction factor ∅ is not لت ثر بخش نة س ا االنب ب عندما لك ن اليرلةان باقلةا لكةن
affected by the roughness of the pipe surface. اليرلةان حةةلن لتحة ل ىلة اضة راب فسةةلنت خ ةةا احةةدا لكةةل
However, as the flow changes to turbulent, قةد ضةع العةالم ملود. خش نة معلنة تخص سة ا ا نبة ب
there will be a line for each specific value of ) كدالةة لكةل مسةا لاf’ معامةل احتكةاك1944 ف عام
̅
surface roughness. Moody (1944) proposed a
) التة تةةدع مةةن رقةةم رلن لةةدز الميم عةةة غلةةر البعدلةةة
friction factor f’, which is equal to ( ), as a
̅ خش ة نة الس ة ا ب حةةداتe حلةةث لمثةةل, الخشللونة النسللبية
function of both the Reynolds Number Re and . 5.7 فرسم مخ ا لالنابلب كما مبلن ف الشكل,ال ل
the non-dimensional group ( ) known as the
relative roughness. Here, e denotes the
roughness of the pipe surface in the units of
length. Moody developed the chart for Pipes
shown in Fig 5.7.
By examining Fig 5.7, we note that the laminar سنيد من قة اليرلان ال بةاق5.7 ل امعنا النةر ف الشكل
region is represented by a linear relationship, تتصإ بعالقة خ لة متمثلة بالمعادلة
given by
∅= (5.13)
f= , f ’= (5.14)
Also we notice in the turbulent region, the كما نالحة ف من قة اليرلان االض راب ان معامل االحتكاك
friction factor is a function of the Reynolds لكةن عنةدما لزلةد, ) دالة لةرقم رلن لةدز الخشة نة النسةبلة
number and the relative roughness ( ) فةةة ن معامةةةل االحتكةةةاك لصةةةبا دالةةةة105 رقةةةم رلن لةةةدز عةةةن
5
However, as Reynolds number exceeds 10 , the نيةةد قلمةةا للخش ة نة5.1 ف ة اليةةد ل. للخشة نة النسةةبلة فق ة
friction factor becomes a function of relative . االنابلب مختلفة الصنع
roughness only. Table 5.1 lists values for the
roughness of different makes of pipe.
238
FLOW IN PIPES 5 الجريان في االنابيب
0.03
0.02
0.012
f’
0.006
= 4f
= 8∅ 0.003
0.002
0.0008
2 x 10-4
10-4
Smooth pipe
5 x 10-5
10-5
3 4 5 6 7 8
10 10 10 10 10 10
Re = ( d /
You can cite the Moody diagram in literature and in the Internet.
239
FLOW IN PIPES 5 الجريان في االنابيب
Table 5.1 Roughness of some building materials قلم الخش نة لبعض الم اد االنشائلة5.5 الجدول
There are a number of empirical equations to هنالك عدد من العالقا التجريبية لحساب ∅ بداللة رقم
determine ∅ in terms of Re, such as: : منهاRe رلن لدز
a. For a smooth pipe and, 2.5 اذا كان االنب ب أملس رقم رلن لدز لتراح بلن .أ
2.5 x 103 Re 105, the following : فلمكن استخدام المعادلة105 x 103
equation is used:
b. For a smooth pipe and, اذا كان االنب ب املس رقم رلن لدز لترا ح بلن.ب
2.5 x 103 Re 107, the following : 107 2.5 x 103
equation is used:
240
FLOW IN PIPES 5 الجريان في االنابيب
d- The following equation, developed by P. K. لليرلان االض رابf’ لمكن حساب معامل االحتكاك-د
Swamee and A. K. Jain (Ref 17 ), can be used (17) باستخدام معادلة سوامي و جي ال اردة ف المصدر
to calculate f’: : ه
f’ = (5.18)
( )
A liquid is flowing in a horizontal pipe, made of ليري سائل ف أنب ب افق مصن ع من مادة الصلب التيةاري
commercial steel, at a velocity 4.57 m/s. The فةاذا علمةت ان ق ةر ا نبة ب الةداخل4.57 m/s بسةرعة
internal diameter of the pipe is 52.2 mm, the كثافةة4.46 x 10-3 Ns/m2 لز ية السةائل52.2 mm
viscosity of the liquid is 4.46 x 10-3, and its احسةةب خسةةائر االحتكةةاك ليةةزء مةةن801 kg/m3 السةةائل
density is 801 kg/m3. Calculate the friction loss . 36.6 m االنب ب لا
for a pipe length of 36.5 m.
Solution
الحل
To calculate the friction losses Lf in J/kg, we
نفرض انJ/kg ب حداتL لحساب خسائر االحتكاك
assume
مستقر أ ) اليرلان غلر انضينا
(a) Steady incompressible flow
241
FLOW IN PIPES 5 الجريان في االنابيب
To determine the flow regime we first calculate ,نحسب أ ال رقم رلن لدز لتعللن نم اليرلان
the Reynolds number,
̅
Re = = (SI units used)
Re = 43089.6
اذن نسةةتنت مةةن قلمةةة رقةةم رلن لةةدز ان اليرلةةان اضة راب لةةذا
The value of the Reynolds number indicates
نحتاب قلمة الخش نة النسبلة ليرض الياد قلمة معامل االحتكاك
that the flow is turbulent. Therefore, to
ه ة5.1 نقةةرأ قلمةةة الخش ة نة مةةن اليةةد ل. 5.7 مةةن الشةةكل
estimate the friction factor from fig 5.7, we first
اآلن. لالنبةةة ب المصةةةن ع مةةةن الصةةةلب التيةةةاري0.046
read the value of roughness from table 5.1,
نحسب الخش نة النسبلة
which is 0.046 for commercial steel pipes, and
then we evaluate the relative roughness
We now read the value of the friction factor : ه5.7 نقرأ قلمة معامل االحتكاك من الشكل
from fig 5.7, which is:
f’ = 2.224
f = f’/4 = 0.006
̅
Lf = 4f
242
FLOW IN PIPES 5 الجريان في االنابيب
Comment مالحظة
Make sure to use the same units to solve such . ليب مالحةة ال حدات تنسلقها ف حل هذ المسائل
problems.
Exercise تمري
Evaluate the friction factor using the empirical من المعادالت التيرلبلةة د ن اللية ءf احسب معامل االحتكاك
equations and repeat the calculations using . ىل مخ االحتكاك ثم اعد الحل مستخدما االكسل
Excel.
5.5.2 Pipe diameter by trial & error قطر االنبو بطريقة التجربة الخطأ5.5.5
Example 5.2 5.5 مثال
Water, density 103 kg/m3 and viscosity لز يتةا103 kg/m3 ليةري مةاء كثافتةا
1.55 x 10-3 Ns/m2, is flowing in a steel pipe at a ف انب ب مصن ع من الصلب التياري1.55 x 10-3 Ns/m2
rate of 9.46-3 m3/s. If the pipe is 305 m long and فةةةاذا كةةةان ةةة ل ا نبةةة ب, 9.46 x 10-3 m3/s بمعةةةدل
the pressure drop due to friction is equivalent كان هب الضي بسبب االحتكاك مكافئا عم دا من305 m
to a water head of 6.1 m, calculate the pipe . أحسب ق ر االنب ب, 6.1 m الماء مقدار
diameter.
Solution الحل
The pipe diameter will be calculated assuming نحسب ق ر ا نب ب بناء عل االفتراضات االتلة
We must first determine the flow regime by لكةن, لقتض أ ال حساب رقم رلن لدز لمعرفةة نمة اليرلةان
calculating the Reynolds number. The diameter قلمة ق ر االنب ب ميه لة لةدلنا لةذا نسةتخدم طريقلة التجربلة و
of the pipe is unknown and hence we must use تةةتلخص ال رلقةةة بةةافتراض قلمةةة لق ةةر. الخطللأ لحةةل المسة لة
the trial and error method. Trial and error is a ا نب ب ثم نحسب قلمةة ق ةر باسةتخدام مخ ة االحتكةاك فةذا
method based on assuming a value for the pipe كانت القلمةة المحسة بة مقاربةة للقلمةة االفتراضةلة نت قةإ لعةد
diameter, then calculating the diameter using . الي اب صحلحا
the friction chart. The two diameters are
compared, and if the values are close, the guess
is correct and we proceed with the solution.
243
FLOW IN PIPES 5 الجريان في االنابيب
However, if the calculated value is different أمةةا اذا كانةةت القلمةةة المحسةة بة تختلةةإ عةةن القلمةةة المفترضةةة
from the assumed value, a new diameter will be فليب تيلةر الحسةابات ذلةك باتخةاذ قخةر قلمةة محسة بة لق ةر
calculated using the previous calculated value ا نب ة ب قلمةةة مفترضةةة يدلةةدة هكةةذا نكةةرر الحسةةابات حت ة
as the assumed value. The calculation is لفتةةرض أن قلمةةة ق ةةر االنب ة ب. تتقةةارب قلمتةةا ق ةةر االنب ة ب
repeated in this manner until the two last : كفرضلة أ ل2.239 m تسا ي
values are close. Let us assume a diameter
value of 0.089 m as a first guess:
̅
Re =
̅= = = 1.52 m/s
Re = = 87277
The surface roughness in table 5.1 is 4.6 x 10-5m 4.6 x 10-5 m تسا ي5.1 خش نة س ا االنب ب من اليد ل
= = 0.00049
f = f’/4 = 0.0051
We will then calculate a new value for the pipe (5.10 ثم نحسب قلمة يدلدة لق ر االنب ب باستخدام المعادلة
diameter using equation (5.10)
̅
hf = 4f
Substituting:
: نع ض ف المعادلة
̅ = Q/A = 4Q/π d2
244
FLOW IN PIPES 5 الجريان في االنابيب
d = 0.0945 m
It is noted that the calculated value of d ( تختلةإ عةن قلمتةا0.0945) المحسة بةd لالحةة أن قلمةة
(0.0945) is higher than the assumed value لةةةذا لنبيةةة تكةةةرار الحسةةةابات2.239 المفترضةةةة التةةة عةةةدت
0.089; therefore the calculations will be 2.2945 باعتبار القلمة المفترضة تسا ي
repeated taking the assumed value as 0.0945
Re = = 82200
= = 0.0049
The new value for f from Fig 5.7 is 0.0052; now ( االن نحسةب5.7 )من الشةكل2.2252 اليدلدة هf قلمة
we calculate the new diameter applying (5.1.) القلمة اليدلدة لق ر االنب ب باستخدام المعادلة
equation (5.10)
d = 0.0945 m
We note that the new value of d is the close to اليدلدة مقاربةة للقلمةة المفترضةة التةd لالحة اآلن ان قلمة
the previous value and therefore we end the عللةةا هنةةا نت قةةإ مةةن تكةةرار0.0945 m كانةةت تسةةا ي
iterations and consider the answer 0.0945 m. ف ة معضةةم, 0.0945 m الحسةةابات لعةةد الي ة اب مسةةا
In most cases the iterations are stopped when . الحاالت لمكن انهاء الحسابات عندما تقترب القلم ال تتسا
the values get very close.
245
FLOW IN PIPES 5 الجريان في االنابيب
Comment مالحظة
The trial and error method is not restricted to انمةا, التقتصر هةذ ال رلقةة علة اليةاد ق ةر ا نبة ب فقة
the calculation of pipe diameter. It can also be لمكةةن اسةةتخدامها لتخمةةلن معةةدل اليرلةةان ف ة االنب ة ب ألضةةا
used to estimate the flow rate of the fluid when . عندما لك ن ق ر معل ما سرعة اليرلان ميه لة
the diameter of the pipe is given and its velocity
is unknown.
Exercise تمري
Use the Excel program to solve example 5.2. . 5.2 استخدم برنام االكسل لحل المثال
5.5.3 Friction losses in pipe section خسائر االحتكاك فلي تغيلر مقطلع األنبلو5.5.5
variation and in pipe fittings وفي قطع تركي األنابي
(a) Sudden expansion in a pipe (أ) التوسيعة المفاجئة في األنبو
If the pipe section increases gradually, the اذا ت سع مق ةع ا نبة ب تةدرليلا فة ن خسةائر االحتكةاك للمةائع
friction losses will slightly increase compared to الياري ستزداد قللال مما ل كان المائع ليري فة انبة ب ثابةت
that in a constant section pipe. The losses in أمةا. ف كثلر من ا حلةان لمكةن اهمةال هةذ الزلةادة, الق ر
such situations can often be disregarded. اذا حدث ت سع مفايئ ف ا نبة ب فةان مقةدار ال اقةة الضةائعة
However, if a sudden expansion is encountered, بسةةبب االحتكةةاك سةةتزداد زلةةادة ملم سةةة لنشةة ء الةةد مات فةة
as shown in fig 5.8, the friction losses will be السةتمرارلة اليرلةان. 5.3 الت سلعة كما ه مبلن ف الشكل
significant. This is due to the formation of لذا نفترض, لدخل المائع الت سلعة بنفس مساحة مق ع االنب ب
ان
eddies in the enlarged section. Due to the flow
continuity, the fluid enters the expansion with
the same pipe cross section area, hence we can
assume
P1 = P0
̅ =̅
Also, cross section area (1) is equal to (2), )2 ) تسا ي مسةاحة المق ةع1 أن مساحة المق ع المت سع
therefore أي أن
A1 = A2
246
FLOW IN PIPES 5 الجريان في االنابيب
Fig 5.8 Sudden expansion in a pipe الت سلعة المفايئة ف ا نب ب5.5 الشكل
Applying the momentum equation (Eq. 4.85) ) باتخةاذ حيةم4.35 اذا بقنا معادلة تة ازن الةزخم المعادلةة
and considering the control volume without the : نحصل علFx التحكم بد ن اليدار فستهمل الق ة
pipe wall, we can ignore the force Fx to obtain:
P1 A1 – P2 A2 = G ( ̅ ̅ ) (5.18)
We assumed (β =1) and therefore the flow is . ( باعتبار اليرلان اض رابلا نβ =1) حلث افترضنا
considered turbulent.
G = ρ ̅ A0 = ρ ̅ A2
Hence: : اذن
G = ρ ̅ A0 = ρ ̅ A2 ̅
̅ =( ̅
A2 = A2
247
FLOW IN PIPES 5 الجريان في االنابيب
We get لصبا
( ) (1 - )= (5.19)
Applying the energy equation to sections (1) ) باستخدام2 , )1 بت بلج معادلة ال اقة لد المق علن
and (2) and using equation (4.74) we obtain: : ( نحصل عل اآلت4.74 المعادلة
∆̅
+g∆ +∫ + Ws + Lf = 0
α = 1 , ∆ = 0 , Ws = 0
For the incompressible fluid we can write: : باعتبار المائع غلر انضيا
∫ = v (P2 – P2) =
Hence the energy equation will be: : لذا تختصر معادلة ال اقة ىل الصلية اآلتلة
̅ ̅
+ + Lf = 0
̅ =̅
̅ ̅
= – Lf (5.20)
248
FLOW IN PIPES 5 الجريان في االنابيب
̅ ̅
̅ ( ) (1 - )= – Lf (5.21)
̅ =( ̅ )2
We obtain
نحصل عل
̅ ( ) (1 - )=[ ̅ –( ̅ )2]/2 - Lf
̅
Lf = (1 - )2 (5.22)
Equation (5.22) can be used to estimate the ) نست لع تخمةلن خسةائر االحتكةاك5.22 باستخدام المعادلة
friction losses Lf in a sudden expansion of the حلث كةان ̅ لمثةل, ف ت سلعة مفايئة ف مق ع ا نب بLf
pipe. Where ̅ denotes the average velocity in . مت س سرعة يرلان المائع ف ا نب ب ا صير حيما
the pipe of the smaller diameter.
Fig 5.9, shows how the flow area decreases as كلةةإ تتنةةاقص مسةةاحة اليرلةةان أثنةةاء5.9 لتضةةا فةة الشةةكل
the fluid flows through a sudden contraction. It مر ر المائع ف تضلقة مفايئةة حلةث لالحةة اسةتمرار الةتقلص
is noted that the contraction continues up to ثةةم تبةةدأ مسةةاحة اليرلةةان باالزدلةةاد ىل ة حةةد المقطللع األقل ل
the smallest section known as vena contracta, . ) 2 لتصل ىل قدر ا نب ب ا صير ف النق ة
and then the area starts to increase
approaching the smaller pipe diameter at point
(2).
249
FLOW IN PIPES 5 الجريان في االنابيب
Fluid Flow
In contrast to a sudden expansion, eddies are تك ن خسائر االحتكاك هنا ضئللة لعدم نش ء د مةات بقةدر مةا
not formed here; therefore the friction losses بت بلج معةادلت ال اقةة الةزخم.لحدث ف الت سلعة المفايئة
are minimal. Applying the energy and ) ه5.22 نحصل عل معادلة مماثلة للمعادلة
momentum equations, we obtain an equation
similar to equation (5.22), which is
̅
Lf = (1 - )2 (5.23)
Cc = (5.24)
Substituting equation (5.24) into equation ( نحصل عل5.23) ( ف المعادلة5.24) بتع لض المعادلة
(5.23), we get
250
FLOW IN PIPES 5 الجريان في االنابيب
̅
Lf = ( – 1)2 (5.25)
For values of the ratio (d2/d1), 0.0 to 1.0, the ذلةك عنةدما تتةرا ح نسةبة1.2 2.6 بلنCc تترا ح قلمة
value of Cc ranges between 0.6 and 1.0. Close كمةةا ت يةةد معادلةةة تيرلبلةةة, ( بةةلن الصةةفر ال احةةدd2/d1)
results for turbulent flow can also be obtained ( لليرلةةان االض ة راب5.25) تع ة نتةةائ مقاربةةة للمعادلةةة
by the following empirical equation ه
̅
Lf = 0.55 (1 - ) (5.26)
Many types of pipe fittings are used to join ل يد عدد كبلر م قطع تركي األنابي تستخدم لرب ا نابلب
pipes in various industrial installations. Typical تضم عادة شبكة أنابلب المصنع. بعضها ببعض ف المصانع
تفرعات تيلرات ف الحيم عدلةدة ممةا لسةت يب تة فلر ق ةع
pipe networks consist of pipe branches
التركلب المتن عة بحي م قلاسلة تالئم حية م االنابلةب المختلفةة
available in widely varying sizes; therefore
. ميم عة من هذ الق ع المتن عة5.12 لالحة ف الشكل
suitable standard fittings are required. Fig 5.10
shows a number of these fittings.
251
FLOW IN PIPES 5 الجريان في االنابيب
Valves are used to regulate the fluid flow in تسةةتخدم الصةةمامات لتنةةةلم يرلةةان المةةائع ف ة ا نبةة ب حلةةث
pipes; this is done by changing the valve هنالةةك. لمكننةةا تيللةةر فتحةةة الصةةمام للةةتحكم بمعةةدل اليرلةةان
opening to control the flow rate. There are أنة اع مختلفةةة مةةن الصةةمامات مثةةل الصللمام البللوابي والصللمام
many types of valves, such as gate valves, 5.11 لبةلن الشةكل. الكرو والصمام غير المرجلع غلرهةا
globe valves and check valves etc.. Some . بعض هذ الصمامات
common valves are shown in fig 5.11.
Check Valve
Gate Valve Globe Valve
The presence of valves, or any type of pipe أن يةة د الصةةمام أ ق عةةة الةةرب لعرقةةل يرلةةان المةةائع فةة
fittings, will obstruct the flow of the fluid and فف ة أنب ة ب قصةةلر, ا نبة ب لسةةبب خسةةائر احتكةةاك اضةةافلة
hence increase the friction losses. For example, دريةة مةثال قةد تزلةد خسةائر االحتكةاك فة92 منحنة بزا لةة
an angled 900 short piece of pipe, known as a الحنلة عل ماه فة االنبة ب المسةتقلم لمكةن حسةاب خسةائر
pipe bend, will increase the friction losses االحتكاك ف الصمام أ غلر من المعادلة اآلتلة
significantly. The friction losses can be
estimated by the following equation
̅
Lf = Kf (5.27)
where Kf is the friction loss factor taking values معامل فقدا الطاقة الذي لتخةذ القةلم المبلنةة فةKf حلث لمثل
given in table 5.2 for turbulent flow, and ̅ is أن ̅ ه مت س, باعتبار اليرلان اض رابلا5.2 اليد ل
the average velocity in the pipe. . السرعة ف ا نب ب
252
FLOW IN PIPES 5 الجريان في االنابيب
Another method to calculate the friction losses هنالك رلقة اخر لحساب خسةائر االحتكةاك فة الصةمامات
in valves and fittings is to add an equivalent ق ةع تركلةةب ا نابلةب هة اضةافة ة ل ىلة ة ل ا نبة ب
length to the pipe length; this is to compensate ثةم تحسةب خسةةائر االحتكةاك فة, للتعة لض عةن الصةةمام مةثال
for the valve or fitting. The friction losses are االنب ة ب الصةةمام ف ة ض ة ء ال ة ل اليدلةةد بم يةةب المعادل ةة
then calculated based on the new total length لمكةةن الحص ة ل عل ة قةةلم تقرلبلةةة للط لول المكللاف. (5.9)
using equation (5.9). The approximate values of le ( هنةاle/d) بصةلية5.2 للصمام ا غلةر مةن اليةد ل
equivalent length for a valve or any other اذا كةان المةراد. ه ق ر االنب بd لمثل ال ل المكافئ
fitting are given in table 5.2 as (le/d); le denotes حساب خسائر االحتكاك الكللة ف منة مة انابلب فليب ايةراء
the equivalent length and d the diameter. The الحسابات لالنب ب المستقلم أ ال ثم تضاإ لا خسةائر االحتكةاك
total friction losses are calculated by summing . ا خر
up the straight pipe losses plus the extra losses.
Non return ball valve 150 2.2 صمام غلر مريع ذ كرة
(check valve)
Angle valve fully opened 150 2.0 مفت ح- صمام ذ الزا لة
Table 5.2 Equivalent length for turbulent flow in ال ةةةة ل المكةةةةاف ء لليرلةةةةان االضةةةة راب فةةةة5.5 الجللللدول
valves and fittings الصمامات ق ع تركلب االنابلب
253
FLOW IN PIPES 5 الجريان في االنابيب
Solution الحل
Given: :المعلوم
254
FLOW IN PIPES 5 الجريان في االنابيب
H = z1 - z2
We apply the energy equation for the height )2 )1 ن بج معادلة ال اقة بلن النق تلن
between points (1) and (2)
∆̅
g∆ + + ∫ + Ws + ∑Lf = 0 (5.28)
∫ = v (P2 –P1) =
Ws = 0.0
Therefore the equation will be reduced to: : ىل5.23 لذا نختزل المعادلة
̅ ̅
g (z2 – z1) + + + ∑Lf = 0 (5.29)
̅ = 0.0
P1 = P2
255
FLOW IN PIPES 5 الجريان في االنابيب
Therefore: :اذن
̅
-Hg+ + ∑Lf = 0 (5.30)
A2 = π
A2 = π = 1.963 x 10-3 m2
̅ = 4.055 m/s
We then calculate the friction losses ∑Lf as ∑ عل النح اآلتLf ثم نحسب خسائر االحتكاك
follows
∑Lf = Lf1 + Lf2 + Lf3 + Lf4 + Lf5 + Lf6
Friction losses have to be calculated for six اذ ت يد ستة أيزاء لنبي حساب خسائر االحتكاك ف كل يزء
different sections and then added up. .منها عل انفراد ثم يمعها
(a) Friction losses in the contraction from ا) خسةةائر االحتكةةاك فةة الةةتقلص الحاصةةل مةةن مسةةاحة
A1 to A2. We use equation (5.26) نسةةةتخدم. A2 ىلةةة مسةةةاحة مق ةةةع االنبةةة بA1 المق ةةةع
(5.26) المعادلة
̅
Lf = 0.55 (1 - )
The ratio (A3/A1) is assumed to be equal to zero, كبلةةرة يةةدا لةةذا لمكةةن اعتبةةارA1 آلن مسةةاحة مق ةةع الخةةزان
because the tank area A1 is very large, therefore أذن, ( لسا ي الصفرA3/A1) المقدار
256
FLOW IN PIPES 5 الجريان في االنابيب
To determine the flow regime, we calculate the : لذا نحسب رقم رلن لدز, لستلزم تحدلد نم اليرلان
Reynolds number:
̅
Re = = (103 x 0.1 x 1.013)/10-3
Re = 101300
This indicates that the flow is turbulent, thus we (5.9) لذا سنستخدم المعادلة, هذا لدل أن اليرلان أض راب
use equation (5.9) to estimate Lf2 Lf2 لحساب
̅ ̅
Lf = 4f = 4f
We obtain the magnitude of e from table 5.1 f ( ثم قلمة4.6 x 10-5) ه5.1 من اليد لe ن يد قلمة
which is equal to 4.6 x 10-5, then we find f from : باعتبار5.7 من الشكل
fig 5.7, the value is based on:
We have Re = 101300, giving value for f equal to بحةد دf ( ممةا لع ة قلمةةRe = 101300) رقةم رلن لةد
about 0.005 2.225
Thus أذن
257
FLOW IN PIPES 5 الجريان في االنابيب
(c) Friction losses Lf3 in the bend attached ف الحنلة المثبتة فLf3 ب) خسائر االحتكاك
to pipe (3) (3 ا نب ب
̅
Lf3 = Kf
Using table 5.2 we find that Kf is equal to 0.75 2.75 تسا ي5.2 من اليد لKf قلمة
(d) Friction losses in the reduction from 10 cm ف التضلقة من ق رLf4 د) خسائر االحتكاك
diameter 10 cm to 5 cm 5 cm ىل
̅
Lf4 = 0.55 (1 - )
̅
Lf4 = 0.55 (1 - )
̅ = ̅ = 4.055 m/s
(e) Friction losses Lf5 in the pipe 5 cm 5cm ف ا نب بLf5 ) خسائر االحتكاك
̅
Re = = (103 x 0.05 x 4.055)/10-3
Re = 202750
258
FLOW IN PIPES 5 الجريان في االنابيب
Value of f given in Fig 5.7 is about 0.0053. The ة ل ا نبة ب , 2.2253 هة زهةاء5.7 من الشةكلf قلمة
total length of the pipe is الكل ه
40 + 3 + 16 = 59 m
(f) Friction losses in the two bends ) خسائر االحتكاك فة الحنلتةلن المتصةلة بةا نب ب
attached to pipe 5cm 5 cm
̅
Lf6 = 2 (Kf )
We have Kf = 0.75, the value is from table 5.2 Kf = 0.75 , 5.2 لدلنا من اليد ل
∴ H = 15.738 m
Comment مالحظة
If a pipe includes valves and fittings, we can add ف حالة ي د ق ع تركلب صمامات ف انبة ب احةد فةلمكن
the equivalent lengths to the pipe length and يمةةع اال ةة ال المكافئةةة مةةع ةة ل االنبةة ب ثةةم تقةة لم خسةةائر
calculate the friction losses using equation (5.9). . ( 5.9) االحتكاك عل اساس ال ل الكل باستخدام المعادلة
259
FLOW IN PIPES 5 الجريان في االنابيب
Exercise تمري
If the tank contained petroleum liquid of ثبةةت2.37 اذا كةةان السةةائل ف ة الخةةزان نف ةةا كثافتةةا النسةةبلة
specific gravity 0.87 and a gate valve is fixed at ؟H فما قلمة, صمام ب اب ف نهالة منة مة االنابلب
the end of the piping system, what will be the
value of H?
Given: : المعل م
l1 = 120 m, l2 = 60 m, l3 = 40 m
g = 9.81 m/s2
260
FLOW IN PIPES 5 الجريان في االنابيب
Obviously, the liquid will flow from point D to B ىل الخةزانلنD من ال اضا ان السائل سليري من النق ة
the two tanks B and C. This is due to the fact أعلةةة منهمةةةا لقتضةةة اليةةةاد ثةةةالثA ن الخةةةزانC
that tank A is higher than the other two tanks. ̅ ,̅ معةةادالت للحةةل ذلةةك ل ي ة د ثالثةةة مياهلةةل ه ة
There are three unknowns, ̅ ,̅ ̅ ̅
thus three equations are required.
B ىلA ن بج معادلة ال اقة عل اليرلان من: أوال ا
First: we apply the energy equation to the flow
from A to B
261
FLOW IN PIPES 5 الجريان في االنابيب
∆̅
+ ∫ + g ∆ + ∑Lf = 0
̅ ̅
+ + (zB –zA) +∑Lf = 0
The pressure acting on the two tanks is بما ان الضي المسل عل الخةزانلن لسةا ي الضةي الية ي
atmospheric pressure, therefore: : لذا
PA = PB
We also have: :كذلك لدلنا
zA - zB = 16
̅ ̅
=0
̅ ̅
∴ ∑Lf = 4f + 4f
̅ ̅
-16 g+ 4f ( + )=0
̅ ̅
16 x 9.81 = 4 x 0.001 ( +
Second: we apply the energy equation to the C ىلةA ن بةج معادلةة ال اقةة علة اليرلةان مةن: ثانيا
flow from A to C, and going through the same : باتباع نفس الخ ات السابقة سنحصل عل المعادلة اآلتلة
steps we obtain the following equation:
Third: the continuity equation gives: : لدلنا من معادلة ا تصال ما ه قت: ثالثا ا
Q1 = Q2 + Q3
π
̅ = ̅ + ̅
̅ = (d2/d1)2 ̅ + (d3/d1)2 ̅
∴ ̅ = (0.075/0.12)2 ̅ + (0.06/0.12)2 ̅
Solving equations (I), (II) and (III) will provide ( سنحصل عل قلمIII) (II) (I) نتلية حل المعادالت
values for ̅ ̅ ̅ . From equation (I), : ) I فمن المعادلة, ̅ ̅ , ̅
we have:
̅ = √9.81 – 1.25 ̅ (IV)
̅ ̅ –= 1.25
[ 0.3906 x √9.81 √9.81̅ –] 1.25 ̅ √17.657
– [0.25 (IV)
– 1.5 ̅ ] = 0 (VI)
263
FLOW IN PIPES 5 الجريان في االنابيب
We calculate the left hand side of equation (VI) (VI) نحسب قلمة ال رإ االلسر للمعادلة
= 0.1263
The value 0.1263 of the left hand side of the ه بعلةدة ن عةا2.1263 من ال اضا أن قلمة ال رإ ا لسر
equation is not close to the value of the right عللةةا, مةةا عةةن الصةةفر الةةذي لمثةةل ال ةةرإ ا لمةةن للمعادلةةة
hand side which is 0; hence we will choose :سنختار قلمة أخر للسرعة لتكن
another value for the velocity, let is consider:
̅ = 1.9 m/s
And calculate the value of the left hand side of ثم نحسب قلمة ال رإ ا لسر مرة ثانلة حلث نحصل عل
the equation again; we get
̅ = 1.8 m/s
We note that the correct value of velocity ̅ is 1.3 1.9 االن لتضا ان قلمة السةرعة ̅ الحقلقلةة هة بةلن
between 1.9 and 1.8 and we will consider 1.82. ( سلصةةةةباVI) ال ةةةةرإ ا لسةةةةر للمعادلةةةةة. 1.32 لنفرضةةةةها
The left hand side of equation (VI) will be: : لسا ي
= - 0.0005
The number obtained is close to 0 and لةذا سةنعتبر قلمةة السةرعة, المقدار ا خلةر قرلةب مةن الصةفر
therefore we consider the velocity equal to 1.82 ( فنحصل علIV) نع ض ف المعادلة, 1.82 m/s تسا ي
m/s. We will now substitute in equation (VI) to : ̅ قلمة السرعة
find ̅ :
̅ = √9.81 – 1.25 x 1.822
̅ = 2.381 m/s
264
FLOW IN PIPES 5 الجريان في االنابيب
̅ = 3.562 m/s
Finally we calculate the flow rate in each pipe اخلرا نحسب معدل اليرلان ف كل أنب ب
2
Q1 = (π/4) d1 ̅
Q2 = (π/4) d22 ̅
Exercise تمري
We can now check the flow regime in the three لمكن االن ايراء تدقلج لتعلن نم اليرلان ف ا نابلةب الثالثةة
pipes to ensure that it was turbulent. We can كمةةةا لمكةةةن حسةةةاب ال اقةةةة. ذلةةةك الثبةةةات ك نةةةا اضةةة رابلا
also check the value of the kinetic energy to لمكن الضا الت كةد مةن صةحة, الحركلة الثبات ضآلة مقدارها
show its magnitude is small and our assumption مةةةنQ1 أي حسةةةاب, اليةةة اب بت بلةةةج معادلةةةة االتصةةةال
was correct. Furthermore, the answer can be ) مقارنة قلمتا بالقلمة المحسة بةQ1 = Q2 + Q3 المعادلة
checked by applying the continuity equation to سةةةنترك هةةةذ الخ ةةة ات كتمةةةرلن, 0.0206 m3/s هةةة
calculate Q1 using (Q1 = Q2 + Q3). The new Q1 is تيدر االشارة الة ان تحلةلالت شةبكات االنابلةب تعةد. للقارئ
then compared to the answer 0.0206 m3/s. The تسةتخدم الحاسةةبات. اساسةا لتصةملم منة مةات ت زلةع الملةا
above mentioned checks are to be done as an . االلكتر نلة بشكل اسع لحل مثل هذ المسائل
exercise. It is worth noting that the pipe
network analysis is considered essential for the
design of water distribution systems. Computer
is now used effectively and extensively in this
field.
Repeat the calculations of the above example . أعد حل المثال اعال مستخدما برنام اكسل
using Excel.
265
FLOW IN PIPES 5 الجريان في االنابيب
5.5.5 The time required to drain حسللا الللزم الللالزم لتفريللن كميللة م ل5.5.5
liquid from a storage tank السائل موجودة في خزا
سن ضةةا رلقةةة اشةةتقاج معادلةةة لحسةةاب الةةزمن الةةالزم لتفرلةةغ
In the following example, we will show how to
كملة معلنة من السائل الم ي دة ف خزان من خالل أنب ب فة
develop an equation to estimate the time
: المثال اآلت
required for draining a certain quantity of liquid
from a tank.
A cylindrical storage tank, 200 m2 cross section لحتة ي مةاء200 m2 خزان اس ان الشكل مسةاحة قاعدتةا
area, contains water to a depth of 6 m. The tank 0.1 m الةذي لفةر مةن خةالل انبة ب افقة ق ةر6 m بعمج
is drained through a pipe, 200 m in length, احسةةب الةةزمن الةةالزم. مثبةةت قةةرب قعةةر200 m لةةا
attached to the bottom. Calculate the time علمةا2 m النخفاض مست س ا المةاء فة الخةزان بمقةدار
required for the water level to drop 2 m. (f = 0.008) أن
consider (f =0.008)
Solution الحل
To compute the time required for the level to 2 m الماء بمقدار اللياد الزمن الالزم النخفاض مست
drop 2 m we assume نفترض ان
Obviously the level of the liquid changes with المعل ة م ان مسةةت س ة ا السةةائل ف ة الخةةزان ه ة متيلةةر مةةع
time, therefore we will assume it is H’ at any فة أي لحةةةH’ تيلرات الزمن لةذا نفتةرض انةا لعلة بمقةدار
given time. We then apply the energy equation )2 )1 ثةةةم ن بةةةج معادلةةةة ال اقةةةة بةةةلن النق تةةةلن, كانةةةت
to points (1) and (2) of Fig 5.14. 5.14 الم ضحتلن ف الشكل
∆̅
g∆ + + ∫ + Ws + ∑Lf = 0
=1
266
=1
FLOW IN PIPES 5 الجريان في االنابيب
(1)
dH’
(1)
H’1
dH’ H’
H’2
H’1
H’
(2)
H’2
Fig 5.14 5.55 الشكل
(2)
The pressure at (1) is equal to that at (2), )2 ) لسا ي الضي ف النق ة1 كما أن الضي ف النق ة
therefore the energy equation will be reduced : لذا نختصر معادلة ال اقة ىل
to:
∆̅
+ g ∆z + Lf = 0
̅ =0
∆z = 0 - H’ = - H’
267
FLOW IN PIPES 5 الجريان في االنابيب
The friction losses Lf in the pipe are estimated : الت تخص ا نب ب منLf خسائر االحتكاك تع
by:
̅
Lf = 4f
̅ =√ (a)
The quantity of water drained in time dt is ( تساوdt أن كملة الماء المفرغة ف زمن قدر
( ), where A1 is the cross section area of : ه مساحة مق ع الخزان ; اي انA1 حلث
the tank; hence:
= ̅
’
∴ dt = dH (b)
π
̅
Substituting ̅ given in equation (a), into : (b) ( ف المعادلةa) ̅ من المعادلة نع ض عن
equation (b):
dt = dH’
π
√
268
FLOW IN PIPES 5 الجريان في االنابيب
∫ = ( )√ ∫ -1/2) dH
Substituting in equation (5.30A) for known ( عن القلم المعل مة إلليةاد الةزمن5.30A) نع ض ف المعادلة
quantities will give the required time. . الم ل ب
t = 75841.03 s = 21 hrs
Comment مالحظة
If the density and viscosity are known, The لمكن حساب رقم رلن لدز ىذا كان معل ما كل من كثافة السائل
Reynolds number can be evaluated to check the . لز يتا) لتدقلج ك ن اليرلان اض رابلا
flow is actually turbulent.
Let us consider an incompressible fluid flowing ليةةةري فلةةةا مةةةائع الl لةةةا لنتخةةةذ يةةةزء مةةةن أنبةةة ب أفقةةة
in a horizontal small length of pipe l, as shown نفتةةرض المةةائع, 5.15 ىنضةةيا كمةةا ه ة مبةةلن ف ة الشةةكل
in Fig 5.15. We assume the flow is steady, one . مائعةةا نل ت نلةةا ليةةري باتيةةا احةةد يرلانةةا أنسةةلابلا مسةةتقرا
dimensional and laminar; also, the fluid is نتخةةذ حيةةم الةةتحكم للمةةائع فة داخةةل ا نبة ب كيسةةلم أسة ان
Newtonian. The control volume is to be . ∆x لا r1 نصإ ق ر
considered as a cylindrical element, inside the
pipe, with radius r1 and length ∆x.
269
FLOW IN PIPES 5 الجريان في االنابيب
For steady flow, the net force ΣF acting on the المؤثرة ف يسلمΣF فف حالة االستقرار لصبا ميمل الق
control volume is equal to zero, that is: : أي, المائع المتمثل بحيم التحكم لسا ي الصفر
ΣF = 0 (5.31)
The forces are the pressure force, acting on the أن الق المؤثرة ه تلك النايمة عن الضةي التة تةؤثر فة
ends of the fluid element, and the shear force, نهةةالت يسةةلم المةةائع قةة القةةص التةة تةةؤثر فةة المسةةاحة
acting on the surface area. In Fig 5.15 we have : لدلنا صاف الق5.15 فف الشكل.الس حلة
the net force given by:
270
FLOW IN PIPES 5 الجريان في االنابيب
τr1 denotes the shear stress at the surface of . ه ايهاد القص عند س ا حيم التحكمτr1 الرمز
the control volume.
If the flow in the pipe is fully developed, the لك ن تدر الضغط اذا كان اليرلان ف ا نب ب تام التكوي
pressure gradient will be constant, hence: : أي أن, ثابت المقدار
∆
τr1 = r1 (5.36)
Equation (5.36) indicates that the shear stress is ( ان ايهةاد القةص لتناسةب ةردا5.36) لتضا مةن المعادلةة
proportional to the radius. The maximum value لبلغ أقص قلمةة عنةد اليةدران أي عنةدما, مع نصإ الق ر
of shear will be at the wall when (r1 = r). بالتع لض بداللة قان ن نل تن للز ية هة. (r1 = r) لك ن
Substituting in Newton’s law of viscosity; in this : ف هذ الحالة
case the law is:
τr1 = - (5.37)
271
FLOW IN PIPES 5 الجريان في االنابيب
ux is the velocity at distance x in the pipe. حلةةث لمثةةل uxالسةةرعة عنةةد أي نق ةةة تبعةةد xفةة ا نبةة ب
Combining equations (5.36) and (5.37) will give: بدم المعادلتلن ) (5.37) )5.36نحصل عل :
∆
- = r1
or أ
∆
= r1 )(5.38
∆
= ux r 12 + C )(5.39
The velocity at the pipe wall is zero, that is, بما ان السرعة تسةا ي صةفرا عنةد يةدران ا نبة ب أي أن
(ux = 0) when (r1 = r); we can therefore evaluate ) (ux = 0ذلةك عنةدما ) (r1 = rفلمكننةا تقلةلم ثابةت التكامةل
the integration constant as follows: كاآلت :
∆
0=- r2 + C
∆
=∴C r2 )(5.40
∆
= ux )(r2 – r12
272
FLOW IN PIPES 5 الجريان في االنابيب
∆
ux = r2 [1- ( ] (5.41)
Equation (5.41) indicates clearly that the ( أن ت زلةةةع السةةةرعة لليرلةةةان5.41) لتضةةا مةةةن المعادلةةةة
velocity distribution for laminar flow in a pipe is كما ه مبةلن, ال باق ف ا نب ب ه عل شكل قطع مكاف
parabola shaped, as shown in Fig 5.16. 5.16 ف الشكل
ux = 0 umax
r
Fig 5.16 Velocity and momentum distribution ت زلع السرعة الزخم لليرلان االنسلاب ف5.55 الشكل
for laminar flow in a pipe أنب ب
We can evaluate the average velocity across the ( لمكننةا اليةاد مت سة السةرعة عبةر4.63) بت بلج المعادلة
section of a pipe using equation (4.63): مق ع ا نب ب من
̅ = (1/A)∫ dA
A = π r12, ∴ dA = 2 π r1 dr1
̅= ∫ π (5.42)
273
FLOW IN PIPES 5 الجريان في االنابيب
Substituting for ux, defined in equation (5.41), (5.42) ( ف المعادلة5.41) من المعادلةux اآلن نع ض عن
into equation (5.42), then integrating we will : نكاملها
obtain:
∆ ( ∆ )
̅= = (5.43)
We can apply equation (5.41) to estimate the عل ة امتةةداد الخ ةumax نسةةت لع ابيةةاد السةةرعة القص ة
maximum velocity umax along the central line of علما أن, (5.41) المركزي لالنب ب باستخدام المعادلة
the pipe where (r = 0), so لذا, ( ف مركز ا نب بr = 0)
( ∆ )
umax = (5.44)
Combining equations (5.43) and (5.44) we : ( نحصل عل5.44) , (5.43) بدم المعادلتلن
obtain:
̅= (5.45)
Equation (5.45) shows that the average velocity ( ان مت س السرعة لليرلةان ال بةاق فة5.45) تبلن المعادلة
of laminar flow in a pipe is equal to half the ا نب ب لسا ي نصةإ السةرعة القصة التة نسةت لع قلاسةها
maximum velocity, measured along the central . عل امتداد خ المركز
line.
Dividing equation (5.41) by equation (5.44) will ( نحصةل علة5.44) ( عل المعادلة5.41) بتقسلم المعادلة
provide another form of the velocity : صلية ثانلة لمعادلة ت زلع السرعة ه
distribution equation, which is:
=1–( )2 (5.46)
274
FLOW IN PIPES 5 الجريان في االنابيب
A capillary tube is used to measure the flow لستخدم انبو شعر قصلر لقلةاس معةدل يرلةان سةائل كثافتةا
rate of a liquid with density 875 kg/m3 and فةاذا كةان ق ةر1.13 x 10-3 Ns/m2 لز يتا875 kg/m3
viscosity 1.13 x 10-3 N/m2. The diameter of the كةةان مقةةدار317 mm لةةا 2.22 mm االنبةة ب
tube is 2.22 mm and its length is 317 mm. If the 65.5 mm هب ة الضةةي لكةةافئ عم ة دا مةةن المةةاء ارتفاعةةا
pressure drop in the tube is equivalent to a احسب معدل اليرلان مهمال ت ثلر االحتكاك ف نهالت االنبة ب
water head of 65.5 mm, calculate the flow rate, 996 kg/m3 علما ان كثافة الماء
ignoring the effect of friction at the ends of the
tube. The density of water is 996 kg/m3.
Solution الحل
∆
̅=
-∆Pf = h g
Substituting:
بالتع لض
̅= 2.22 x 10-3
̅ = 0.275 m/s
275
FLOW IN PIPES 5 الجريان في االنابيب
Re = 473
The low value of Reynolds number indicates لبلن رقم رلن لدز عل ان اليرلان انسلاب حلث لصا استخدام
that the flow is laminar, and therefore the use . معادلة هاكن – ب زلل
of Hagen-Poiseuille is justified.
Exercise
تمري
A liquid (density 1190 kg/m3 and viscosity لز يتةا1190 kg/m3 ليةري سةائل كثافتةا
0.0046 Ns/m2) flows at a rate 12 ml/s through a بمعةدل4.1 mm ف انبة ب افقة ق ةر0.0046 Ns/m2
horizontal 4.1 mm diameter tube. Determine احسةةب هب ة الضةةي ف ة كةةل متةةر مةةن ةة ل, 12 ml/s
the pressure drop per m, unit length. .النب ب
We mentioned earlier that, turbulent flow is the كنا قد أشرنا سابقا أن اليرلان االض راب ه السائد ا هم ف
prevailing and important flow in pipes and رغم أننا, االنابلب الت تنقل الم ائع ف المؤسسات الصناعلة
industry. The mechanism of turbulence was not لم نت رج ىل ملكانلكلةة اليرلةان االضة راب بالتفصةلل حلةث
explained in detail because the topic will be اال أنةةا أصةةبا اضةةحا, سةةنتنا لها ف ة الفصةةل الحةةادي عشةةر
covered in chapter 11. However, the reader can فلمةةا لخةةص توزيللع. للقةةار ء رلقةةة تحدلةةد نم ة اليرلةةان
easily now determine the flow regime. The السللراة فلةةن لت صةةةل العلمةةاء ىلةةة تحللةةل رلاضةةة دقلةةج لةةةا
mathematical analysis to yield a velocity profile لكةةةن هنةةةاك, السةةةبب لعةةة د الةةة صةةةع بة حةةةل المعةةةادالت
equation for turbulent flow is very complex, but معةةةادالت تعتمةةةد علةةة التيةةةارب المختبرلةةةة منهةةةا معادللللة
there are a number of empirical equations that : بالوسيوس ه
can be used, and one of these is the Blausius
equation, which is:
276
FLOW IN PIPES 5 الجريان في االنابيب
Applying equation (5.42) will give the average : ( نيد أن مت س السرعة ه5.42) من المعادلة
velocity:
̅= ∫ dA
̅= ∫ dr1
̅= ∫ π dr1
Note: to simplify the integration, you can take ذلةك لتسةهلل مهمةة (r – r1 = y) لمكةن اعتبةار: مالحةةة
(r – r1 = y); this is left to you as an exercise. .ايراء المكاملة الت تترك كتمرلن للدارس
Combining equations (5.47) and (5.48) will ( نت صل ىل معادلة ت زلع5.48) (5.47) بدم المعادلتلن
provide the velocity distribution equation for : السرعة الت تعن باليرلان االض راب ف ا نابلب
turbulent flow in pipes:
̅
= (1/0.82) (1 – )1/7
or أ
̅
= 1.22 (1 – ) )1/7 (5.49)
277
FLOW IN PIPES 5 الجريان في االنابيب
Fig 5.17 illustrates the velocity distribution ل ضةةا الشةةكل 5.17منحنلةةا لخةةص ت زلةةع السةةرعة لليرلةةان
curves for turbulent flow and for laminar or االض راب والجريا الطباقي أو األنسيابي .
streamline flow.
1.0
0.8
̅ C
0.6 A
0.4 B
0.2
0.0
0.0
1.0 1.0
Fig 5.17 Velocity profile for flow in pipes الشكل 5.55منحنلات ت زلع السرعة لليرلان فة ا نابلةب
Cمنحنة لعنة باليرلةةان ] B Aمنحنلةةات تخةةص اليرلةةان االضة راب
][A & B, turbulent flow profiles and C is laminar ال باق [
5.7 Friction losses in non-circular 5.5خسللائر االحتكللاك فللي القنللوا غيللر دائريللة
conduits المقطع
لمكن تخملن خسائر االحتكاك ليرلان المةائع فة القنلوا غيلر
The equations developed for circular pipes can
دائريللة المقطللع باسةةتخدام نفةةس معةةادالت االنب ة ب اذا اسةةتخدم
be used to estimate the friction losses in non-
متوسط القطر الهيدروليكي للقناة dhبدال مةن ق ةر ا نبة ب
circular conduits by applying the concept of
لعرإ dhكاآلت : d
hydraulic mean diameter dh instead of the pipe
diameter d. dh defined as follows:
= dh )(5.50
278
FLOW IN PIPES 5 الجريان في االنابيب
dh = 4 (π 2/4 )/(π d) = d
For a rectangular duct-cross section area (a x b): : )a x b) مساحة مق عها- للقناة المست للة المق ع
For flow between two concentric pipes known لليرلان مابلن أنبوبي متمركزي الذي لدع الجريا الحلقي
as annular flow, the diameter of the larger pipe d2 ا صيرd1 ق ر ا نب ب ا كبر ي
is d1 and that for the smaller one d2
dh = d1 – d2 (5.52)
Exercise
تمري
Derive an equation to calculate the mean
اشتج معادلة لحساب مت س الق ر الهالةدر للك لقنةاة مق عهةا
hydraulic diameter for a duct with a right –
.مثلث قائم الزا لة
angled triangular cross section.
5.8 Flow of non-Newtonian fluids in جريا الموائع غير النيوتونيلة فلي األنابيل5.5
circular pipes دائرية المقطع
In section 5.3, we studied the difference الفرج بةلن الم ائةع النل ت نلةة غلةر5.3 كنا قد بحثنا ف الفقرة
between Newtonian and non-Newtonian fluids; نسةتنت. النل ت نلة بلنا بعةض أنة اع الم ائةع غلةر النل ت نلةة
we also mentioned some types of non- ممةةةا مةةةر تبلانةةةا أن الم ائةةةع غلةةةر النل ت نلةةةة تخضةةةع لصةةةنفلن
Newtonian fluids. Based on the effect of time موائللع: همةا, ذلةك حسةب تة ثر اللز يةة بةالزمن, رئلسةلن
on viscosity, we noticed two main types of non- . موائلللع معتملللدة اللللن زمللل غيلللر معتملللدة اللللن زمللل
Newtonian fluids, namely, time independent سةندرس فلمةا للة يرلةان بعةض الم ائةع المهمةة فة ا نابلةب
and time dependent. We will now investigate . نبلن كلإ لحسب هب الضي فلها
the flow of some important fluids in pipes and
show how to estimate the pressure drop.
279
FLOW IN PIPES 5 الجريان في االنابيب
5.8.1 Streamline flow for a Non- الجريللا األنسلليابي لمللائع غيللر نيوتللوني5.5.5
Newtonian time-independent fluid غير معتمد الن الزم
The data regarding non-Newtonian flow in لرسم عادة منحنة لتةد لن المعل مةات المتعلقةة بيرلةان الم ائةع
pipes are typically plotted as a distinct curve. مثةةل هةةذا5.13 لبةةلن الشةةكل. غلةةر النل ت نلةةة فةة ا نابلةةب
Fig 5.18 illustrates one of these curves; where المنحن حلث لمثل ا حداث الرأس ىيهاد القةص عنةد يةدران
̅
shear stress τw is plotted on the vertical axis, .( ) لمثل ا حداث ا فق الميم عة τw ا نب ب
̅
and the group ( ) on the horizontal axis.
τw = (-∆Pf) d/4 l
̅
( )
Fig 5.18 Stream line flow for a non-Newtonian اليرلان االنسلاب لمائع غلر نل ت ن لتبع معادلة5.55 الشكل
fluid that follows a power law ذات ق ة يبرلة
For a fluid that follows an algebraic power law, أذا اعتبرنا المائع مائعا لتبع ف سل كا معادلة ذا قوة جبرية
we can then write the following relationship: : سنيد العالقة الت تمثل اليرلان ا نسلاب
∆ ̅ n’
= K’ ( ) (5.52)
280
FLOW IN PIPES 5 الجريان في االنابيب
If the data are plotted on a logarithmic scale, n’ ه ملل الخ عندما ترسم المعل مات عل احلداثييn’ حلث
will then be the slope of the line; K’ being a لالحةة أنةا. N.sn’/m2 ثابت حداتاK’ . لوغارثميي
constant having the units N.sn’/m2. It can be تسا ي احةدا فالمةائع هة مةائع نل تة نn’ حلن تك ن قلمة
noted that if the value of n’ is equal to one, the K’ لمثةل. أصير من احد فه من لدائ بنكهلامn’ اذا كان
fluid will be Newtonian; if n’ is less than one, ف حالةة لكة نμ معامل التجانس الذي لصبا مسا لا للز ية
the fluid will be one of Bingham’s plastics. K’ is ( بالصلية5.52) لمكن كتابة المعادلة. المائع مائعا ن نل ت نلا
known as the consistency factor; for a
Newtonian fluid it will simply be equal to the
viscosity . Equation (5.52) can be written in the
following format
∆ ̅ n’-1 ̅
= K’ ( ) ( ) (5.53)
In the case of streamline flow for a Newtonian فف ة حالةةة اليرلةةان االنسةةلاب لمةةائع نل ت ة ن تصةةبا المعادلةةة
fluid, equation (5.53) ( ه5.54) ( مماثلة للمعادلة5.53)
∆ ̅
= μ( ) (5.54)
By comparing equation (5.53) to equation (5.54) ( نةتمكن مةن تعرلةإ5.54 ) (5.53) بمقارنةة المعةادلتلن
we can define the apparent viscosity a for a : لمائع غلر نل ت ن كاآلتμa اللزوجة الظاهرية
non-Newtonian fluid as follows:
̅ n’-1
a = K’ ( ) (5.55)
Accordingly, we can write a Reynolds number ReN بناء عل ذلك نعرإ رقم رلن لدز للمائع غلةر النل تة ن
ReN for a non-Newtonian fluid: : بالمعادلة اآلتلة
̅
ReN = (5.56)
281
FLOW IN PIPES 5 الجريان في االنابيب
Substituting a given in equation (5.55) into ( فةة المعادلةةة5.55) مةةن المعادلةةةμa بةةالتع لض عةةن
equation (5.56), we obtain: : ( نحصل عل5.56)
̅
ReN =
8̅
̅
ReN = (5.57)
Fanning friction factor fN for such flow is defined : لمثل هذا اليرلان بالمعادلةfN لعرإ معامل احتكاك فانتك
by the following equation:
fN = (5.58)
We can now estimate the pressure drop (-∆Pf) ( مةةةن-∆Pf) الضةةةي اآلن نسةةةت لع تخمةةةلن مقةةةدار هبةةة
by applying the following equation: : المعادلة اآلتلة
̅
(-∆Pf) = 4 fN (5.59)
We now have two equations to calculate the همةةةا, الضةةةي هكةةةذا اصةةةبا لةةةدلنا رلقتةةةان لحسةةةاب هبةةة
pressure drop; these are (5.52) and (5.59). . (5.59) ( أ المعادلة5.52) باستخدام المعادلة
5.8.2 Pressure drop for turbulent هبوط الضلغط للجريلا االضلطرابي لملائع5.5.5
flow of a time-independent non- غير نيوتوني غير معتمد الن الزم
Newtonian fluid
For turbulent flow, Reynolds number depends ف حالة االض راب لعتمد رقم رلن لدز عل خ اص المائع
282
FLOW IN PIPES 5 الجريان في االنابيب
on the non-Newtonian fluid properties. Dodge قةةةد قةةةام الباحثةةةان دود و متزنلللر بدراسةةةة. غلةةةر النل تةةة ن
and Metzner did some research on turbulent تفصلللة اشتقا عل اسسها معادلةة تخةص اليرلةان االضة راب
non-Newtonian flow in smooth pipes. They قةةةد نرسةةةم. للم ائةةع غلةةةر النل ت نلةةة خةةةالل االنابلةةةب الملسةةاء
developed an empirical equation and plotted ReN ضةد رقةم رلن لةدزfN مخ ة لمعامةل االحتكةاك فاننةك
the data as a Fanning friction factor fN vs . 5.19 أنةر الشكل. باستخدام معادلة د ب متزنر
Reynolds number ReN, see Fig 5.19.
fN =16/ReN
'
n
Fig 5.19 Friction factor for a time-independent معامل االحتكاك لمائع غلةر نل تة ن غلةر مخ5.55 الشكل
non-Newtonian fluid معتمد عل زمن
After finding the value for fN from the chart, the (-∆Pf) مةةةن المخ ةةة لحسةةةب هبةةة الضةةةيfN بعةةةد اليةةةاد
pressure drop (-∆Pf) is calculated using equation اللمكن استخدام المخ لحساب. (5.59) باستخدام المعادلة
(5.59). The chart can’t be used for rough pipes, فرج الضي ف األنابي الخشنة لعدم ت فر معل مات عن ت ثلر
because of the lack of data for the effect of اال انةا لمكةن اال ةالع, خش نة السة ا علة معامةل االحتكةاك
roughness on the friction factor. However, up . عل دراسات حدلثة لهذا الم ض ع
to date studies are available in literature.
283
FLOW IN PIPES 5 الجريان في االنابيب
In the case of flow for a non-Newtonian fluid , ف حالة يرلان مائع ال نل ت ن لتبع معادلةة ذات قة ة يبرلةة
that follows a power algebraic equation, the فلمكن استخدام المعادلة ذات الق ة اليبرلة المعادلة
power equation can be combined with ∆
) الشتقاج ت زلع السرعة الت اعةدت كتمةرلنτ =
∆
(τ = ) to develop the velocity . 5.14 أنةر المس لة, للقارئ
distribution; this is left for an exercise, see
problem 5.14.
Solution الحل
Given: :المعل م
We calculate Reynolds number using equation )5.57 نحسب أ ال قلمة رقم رلن لدز باستخدام المعادلة
(5.57)
̅
ReN =
284
FLOW IN PIPES 5 الجريان في االنابيب
ReN = 13280
For Re = 13280, the flow is turbulent, and , لك ن اليرلان اض رابلا13280 لقلمة رقم رلن لدز
using Fig 5.18 we find (fN ≈0.0032) هةةة بحةةةد د5.13 مةةةن المخ ةةةfN لةةةذا نيةةةد قلمةةةة
0.0032
We now estimate (-∆Pf) using equation )5.59 ( باستخدام المعادلة-∆Pf) اقن نحسب قلمة
(5.59)
̅
(-∆Pf) = 4 fN
Pipe length = l l = ل ا نب ب
285
FLOW IN PIPES 5 الجريان في االنابيب
̅ ̅
Deceleration of the fluid = = تباطؤ المائع
̅ ̅
Deceleration force = ( l A) ( l A) = الق ة النايمة عن تبا ؤ المائع
̅
P= l (5.60)
Note that the wave speed is equal to the تيدر االشارة ىل أن سراة الموجة تسا ي سلراة الصلو
speed of sound in the fluid. Therefore ( ف حالة غلج5.60) عللا لمكن مكاملة المعادلة, ف المائع
equation (5.60) can be integrated, for لمثلc ( حلثl/c) الصمام ف لحةة من الزمن بلن الصفر
closing the valve at a certain time, between : فتصبا المعادلة, سرعة الص ت
the limits 0 and (l/c), where c denotes the
speed of sound; the integration gives:
̅
P=
P= ̅c (5.61)
Equation (5.61) provides the value P = of̅ c (غلج صمام5.61)) مقدار الضي المت لد نتلية5.61 تع المعادلة
pressure caused by the sudden closure of a لمكن التحقج من ان غلج. مثبت ف انب ب منة مة اليرلان
valve fixed in a flow system. To ensure that الصمام مفايئ أ غلر ذلةك بعةد حسةاب الةزمن علة اسةاس ان
the closure is sudden, we calculate the time م يةة الضةي تن لةج مةن الصةةمام الميلةج بسةرعة الصة ت ثةةم
based on the fact that the wave will leave لةةةةذا لحسةةةةب الةةةةزمن باسةةةةتخدام, تعةةةة د ىللةةةةا بةةةةنفس السةةةةرعة
the valve at the speed of sound and return ( فاذا كان زمةن غلةج الصةمام ا ة ل مةن ذلةك فةالt = 2 l/c)
to it at the same speed. The time is لعد اليلج مفايئا عندئذ تستخدم معادلة اخر لحسةاب الضةي
therefore calculated using (t = 2 l/c). If the : ه
actual time is longer than the calculated
one, another formula is used to estimate
the pressure, which is:
∆̅
P= l (5.62)
∆
286
∆̅
P= l (5.62)
∆
FLOW IN PIPES 5 الجريان في االنابيب
Exercise تمري
A pipe line, 200 m long and 18 inch diameter, مثبت ف نهالتا18 inch ق ر200 m انب ب لا
carrying petroleum liquid at the rate of 0.62 . 0.62 m3/s اذا كان سائل نف ليري فلا بمعدل. صمام
m3/s. If the valve, fixed at the end of the pipe is . 10 s احسب مقدار ارتفاع الضي عند غلج الصمام خالل
closed in 10 s, calculate the pressure rise. The سرعة الص ت ف0.897 علما ان الكثافة النسبلة للمائع
specific gravity of the liquid is 0.897 and the . 1207 m/s السائل
speed of sound in the liquid is 1207 m/s.
The diameter of a pipes used in industry varies تسةةةختدم فةةة المصةةةانع انابلةةةب تتةةةرا ح اق ارهةةةا مةةةابلن بضةةةع
from millimeters to more than a meter. The لتم اختلار حجلم االنبلو األمثلل, مللمترات ىل أكثر من متر
optimum pipe size, used to transport a certain لنقةةل مةةائع معةةلن فةة المصةةنع بعةةد ايةةراء م ازنةةة بةةلن سةةعر
fluid, is determined by balancing the cost of the حلث لعنة اختلةار انبة ب كبلةر الحيةم. ا نب ب كلفة الضخ
pipe with the cost of pumping. If a small size is زلةةادة ف ة السةةعر اذا اختلةةر انب ة ب أصةةير حيمةةا فسةةلخفض
السةةةعر لكةةةن تةةةزداد كلفةةةة ضةةةخ المةةةائع فةةة االنبةةة ب بسةةةبب
selected, the cost of the pipe will decrease but
تتةةة فر االنابلةةةب التيارلةةةة. 5.22 انةةةةر الشةةةكل, االحتكةةةاك
the cost of pumping will increase due to
باحيام مناسبة لذكر عادة الحجم األسمي لالنب ب ه ق ر
friction, see Fig 5.20. Commercial pipes are
االنبةةة ب التقرلبةةة ال لشةةةتر ان لسةةةا ي الق ةةةر الةةةداخل أ
available in different sizes to suit the industry.
ف االنابلب الكبلرة الحيةم لقتةرب الحيةم االسةم. الخاري
The nominal size is normally quoted; this is an مازالةت احيةام االنابلةب القلاسةلة تع ة. ىلة الق ةر الةداخل
approximate diameter. It is closer to the outer
بةةاالن اضةةافة ال ة المتةةر كمةةا تت ة فر مخ ةةات لتعلةةلن الحيةةم
diameter for larger pipes and closer to the inner ا مثةةةةل بةةةةدال مةةةةن ايةةةةراء حسةةةةابات تعتمةةةةد علةةةة المعةةةةادالت
diameter for small pipes. Sizes are available in . االقتصادلة
inches as well as in meters, and charts are used
to help select the optimum size rather than
perform calculations.
Cost of pipe
Cost
Cost of Diameter
pumping
Optimum Diameter
287
FLOW IN PIPES 5 الجريان في االنابيب
Area L2 m2 A المساحة
Speed of sound LT-1 m/s c سرعة الص ت
Constant -- -- C ثابت
Coefficient of contraction -- -- Cc معامل القص
Diameter of pipe L m d ق ر االنب ب
Mean hydraulic diameter L m dh مت س الق ر الهلدر للك
Roughness of surface -- -- e خش نة س ا االنب ب
Fanning friction factor -- -- f معامل احتكاك فانتك
Friction factor of non-Newtonian fluid -- -- fN معامل االحتكاك لمائع النل ت ن
Moody friction factor -- -- f’ معامل احتكاك م دي
Force MLT-2 N F الق ة
Pressure force MLT-2 N FP ق ة الضي
Shear force MLT-2 N Fs ق ة القص
Mass flow rate MT-1 kg/s G معدل اليرلان الكتل
Acceleration due to gravity LT-2 m/s2 g التعيلل الياذب
Friction head L m hf عم د الضي بسبب االحتكاك
Consistency factor -- N.sn’/m2 K’ معامل التيانس
Energy loss factor due to friction -- -- kf معامل فقدان ال اقة بسبب
االحتكاك
Pipe length L m l ل االنب ب
Friction losses L2T-2 J/kg Lf خسائر االحتكاك
Mass M Kg m الكتلة
Pressure ML-1T-2 N/m2 P الضي
Pressure drop ML-1T-2 N/m2 -∆Pf هب الضي
Volumetric flow rate L3T-1 m3/s Q معدل اليرلان الحيم
Radius L m r نصإ الق ر
Radius of fluid element L m r1 نصإ ق ر يسلم المائع
Reynolds number -- -- Re رقم رلن لدز
Reynolds number for a non-Newtonian fluid رلن لدز لمائع غلر نل ت ن
-- -- ReN
Time الزمن
T s t
Average velocity LT-1 مت س السرعة
m/s ̅
Velocity fluctuation LT-1 m/s u’ مقدار ترا ح السرعة
Maximum velocity LT-1 m/s umax السرعة القص
Specific volume L3M-1 m3/kg v الحيم الن ع
The three dimensions -- -- z,y,x
Viscosity ML-1T-1 Ns/m2 االبعاد الثالثة
Apparent viscosity اللز ية
ML-1T-1 Ns/m2 a
Friction factor اللز ية الةاهرلة
-- -- ∅
معامل االحتكاك
density ML-3 kg/m3 الكثافة
288
FLOW IN PIPES 5 الجريان في االنابيب
289
FLOW IN PIPES 5 الجريان في االنابيب
5.1 A petroleum liquid, specific gravity 0.850, is ليري ف انب ب املةس0.850 سائل نف كثافتا النسبلة5.1
flowing in a smooth pipe of diameter 0.28 m. فةاذا كةةان مقةةدار3 m/s بسةرعة مقةةدارها0.28 m ق ةر
The velocity of the liquid is 3 m/s and the احسةةب5.56 x 10-6 m2/s اللز يةةة الكلنماتلةةة للسةةائل
kinematic velocity is 5.56 x 10-6. Calculate the . خسائر االحتكاك ف كل كلل متر من االنب ب
friction losses for each kilometer of the pipe.
5.2 The difference in water level of two storage اذا كةةان الفةةرج ف ة مسةةت المةةاء ف ة خةةزانلن لسةةا ي5.5
tanks is 2.2 m. The diameter of the pipe 18 m لةةا 0.073 m كةةان انبة ب ق ةةر2.2 m
connecting the two tanks is 0.073 and its length فمةا مقةدار اليرلةان الحيمة للمةاء فة, ل صل بلن الخةزانلن
is 18 m. Estimate the volumetric flow rate for . 0.008 ا نب ب ؟ علما ب ن معامل احتكاك فانتك لسا ي
the water running in the pipe. Fanning friction
factor = 0.008.
5.3 A petroleum liquid, specific gravity 0.705 لز يتةةةا0.705 لضةةةخ سةةةائل نف ةةة كثافتةةةا النسةةةبلة5.5
and viscosity 0.5 mN.s/m2, is pumped through 2 km لةا 0.15 m فة انبة ب ق ةر0.5 mN.s/m2
0.15 m diameter pipeline. If the pipeline is 2 km فةةةاذا كانةةةت خشةةة نة سةةة ا االنبةةة ب, 0.04 m3/s بمعةةةدل
long, the flow rate is 0.04 m3/s and the احسةةةةب مقةةةةدار الهبةةةة فةةةة الضةةةةي بسةةةةبب0.004 cm
roughness of the surface is 0.004 cm, calculate .االحتكاك
the pressure drop due to friction.
Ans ب
316.9 kPa
5.4 A liquid, density 801 kg/m3 and viscosity 1.49 cp لز يتةا801 kg/m3 ليةري سةةائل كثافتةةا5.5
1.49 cp, is flowing in a horizontal pipe at a فةةاذا كةةان ق راالنب ة ب, 4.5 m/s ف ة انب ة ب افق ة بسةةرعة
velocity of 4.5 m/s. If the diameter of a steel 65 m لا 2 ½ in المصن ع من الصلب لسا ي
pipe is 2½ in, and its length is 65 m
290
FLOW IN PIPES 5 الجريان في االنابيب
5.5 A pipeline transports oil between two cities بمعةدل10 km انبة ب لنقةل الةنف بةلن مةدلنتلن لمسةافة5.5
10 km apart at the rate of 795 m3/day. If the فاذا كان مقلاس الضي الكةائن فة. مترا مكعبا ف الل م795
pressure gauge at the inlet of the second فمةا الضةي عنةد, 862 kPa مدخل مح ة الضخ الثانلة لقةرأ
pumping station reads 862 kPa, what will be the مخرب مح ة الضخ ا ل كضي مقلاس ) علما ب ن المح ة
pressure at the exit of the first pumping station كةةان. نسةةبة ىل ة ا ل ة17.4 m الثانلةةة تقةةع عل ة ارتفةةاع
as gauge pressure? The second station is 17.4 m : معل ما
higher than the first one. Given:
Ans ب
1971.944 kPa
5.6 Sulphuric acid flows in a smooth pipe 60 m 60 m ليري حامض الكبرلتلةك فة انبة ب املةس لةا5.5
long at a rate of 3 kg/s. If the pressure drop due فةةةاذا كةةةان مقةةةدار هبةةة الضةةةي بسةةةبب, 3 kg/s بمعةةةدل
to friction is 782.2 kN/m2, determine the pipe احسةةب ق ةةر االنبةة ب ب رلقةةة, 782.2 kN/m2 االحتكةةاك
diameter using the trial and error method. علما بان, التيربة الخ
Given: = 1840 kg/m 3
= 25 mN.s/m2
Ans ب
25 mm
5.7 Acetic acid is pumped into a 80 m long pipe 85 mm لضخ حامض الخللك ف انب ب افق ق ر5.5
of 85 mm diameter. If the friction losses mount فاذا كانت خسائر االحتكاك ف االنب ب80 m لا
to 107.896 J/kg, calculate the flow rate; given: : احسب معدل اليرلان ف االنب ب علما ب ن107.896 J/kg
= 1060 kg/m3
= 2.5 mN.s/m2
e = 6 x 10-5 m
291
FLOW IN PIPES 5 الجريان في االنابيب
5.8 A pipe, 10 cm diameter and 40 m long, لنقةل مةاء بمعةةدل40 m لةا 10 cm انبة ب ق ةر5.5
carries water at a rate of 2.5 m3/s. If 20 m of the 20 m فاذا استبدل يزء من س االنبة ب لةا2.5 m3/s
middle part of the pipe is removed and replaced أحسةةب الفةةرج بةةلن خسةةةائر, 20 cm بةةانب ب اخةةر ق ةةر
by a 20 cm diameter pipe, what will the : الثانلة علما ب ن االحتكاك ف المنة مة اال ل
difference in friction losses for the two systems,
given:
f = 0.01
Cc = 0.62
Ans ب
20.316 J/kg
5.9 Water, density 103 kg/m3 and viscosity لز يتةةا103kg/m3 لضةةخ مةةاء كثافتةةا5.5
0.65 mN.s/m2, is pumped into a horizontal pipe, 45 mm فة انبة ب افقة ق ةر الةداخل0.65 mN.s/m2
internal diameter 45 mm and length 180 m, at a فةاذا كانةت حنيلة قائملة, 0.63 kg/s بمعةدل180 m لةا
rate of 0.63 kg/s. If the pipe includes a right كمةةا ل يةةد صللمام بللوابي نصللف, الزاويللة مثبتةةة ف ة االنب ة ب
angle elbow and a half-opened globe valve, مفتللو احسةةب عم ة د الضةةي المكةةافئ لخسةةائر االحتكةةاك ف ة
determine the equivalent head to friction losses .المنة مة
in the system.
5.10 A petroleum liquid is pumped to a storage لضخ سائل نف ىل خزان مفت ح ىلة الية مةن خةالل5.55
tank which is open to the atmosphere, through فاذا كان مقدار الضةي, 0.1 m ق ر50 m انب ب لا
a pipe 0.1 m diameter and 50 m length. The كان فة2.8 bar الذي لدفع السائل ف مدخل االنب ب مسا
liquid is pushed into the pipe inlet by a pressure مةةن مةةدخل20 m المنة مةةة صللمام تحكللم مثبةةت عل ة بعةةد
of 2.8 bar. The system includes a control valve, كمةةا ل يةةد فةة االنبةة ب حنلتةةان قائمتةةا الزا لةةة. االنبةة ب
fixed 20 m from the inlet. There are also two من مست االنبة ب5 m لتصل االنب ب بالخزان عند ارتفاع
right angle elbows in the system. The pipe joins فة ج نق ةة6 m ان ارتفاع النف ف الخةزان لسةا ي. االفق
the tank at a point 5 m higher than the أحسةةةب كةةةال مةةةن معةةةدل اليرلةةةان. اتصةةةال االنبةةة ب بةةةالخزان
horizontal section of the pipe. The liquid level in الحيم ة ف ة االنب ة ب الضةةي عنةةد نق ةةة دخ ة ل السةةائل ىل ة
the tank is 6 m above the joining point of the . اهمل مقدار ال اقة الحركلة ف االنب ب. صمام التحكم
pipe. Calculate the volumetric flow rate and the
pressure at the entry point of the liquid to the
control valve. Ignore the kinetic energy in the
pipe.
292
FLOW IN PIPES 5 الجريان في االنابيب
Energy loss coefficient in the valve = 0.4 = معامل فقدان ال اقة بسبب االحتكاك ف الصمام
Energy loss coefficient in the elbow = 1.3 = معامل فقدان ال اقة بسبب االحتاك ف الحنلة
Ans ب
3
0.04 m /s , 2.07 bar
5.11 Water is flowing, at a rate 0.117 m3/s, in a متصةلةC, B, A ليري ماء ف منة مة ثالثة انابلةب5.55
system of three pipes A, B, and C, connected in لسةا يA فاذا كان ة ل, 0.117 m3/s عل الت ال بمعدل
series. The length of pipe A is 500 m and its ق ةر700 m لسةا يB ل 6 cm ق ر500 m
diameter is 6 cm. Pipe B is 700 m long and has a كةان, 10 cm ق ةر600 m لسةا يC ة ل 8 cm
diameter of 8 cm, whilst pipe C is 600 m long احسةب. (f = 0.02) معامةل االحتكةاك فة ا نابلةب الثالثةة
and 10 cm diameter. The friction factor f in the ق ر االنب ب الذي لنقل الماء بنفس معدل اليرلان بحلةث لكة ن
three pipes is 0.02. Determine the diameter of a .لا لسا ي ال ل الكل للمنة مة لا نفس معامل االحتكاك
pipe that has the same total length as the three
pipes, will transport the same flow rate of
water, and will have the same value of friction
factor.
Ans ب
0.072 m
Ans ب
Q1= 0.079 m3/s
Q3 =0.02 m3/s
ZB = 13.56 m
293
FLOW IN PIPES 5 الجريان في االنابيب
B
l2= 600 m
l1= 1000 m
d2= 0.2 m
d1= 0.3 m
Q2 = 0.06 m3/s
Q1 = ?
zA = 25 m
l3= 1300 m C zB
d3= 0.2 m
Q3 = ?
5.13 Water is flowing in a canal at a rate of 3.8 100 m ليةةري مةةاء ف ة قنةةاة مربعةةة المق ةةع لهةةا5.55
m3/s. The canal is 100 m long and has a square- 1.1 m فةاذا كةان ة ل ضةلع المق ةع, 3.8 m3/s بمعةدل
section with 1.1 m side length. Compute the ( احسب العم د المكافئe = 3 x 10-4 m) خش نة س ا القناة
head equivalent to the friction losses, given that لخسةةةائر االحتكةةةاك علمةةةا ان لز يةةةة المةةةاء الكلنماتلةةةة تسةةةا ي
the roughness of the duct surface e = 3 x 10-4 m . 1.141 x 10-6 m2/s
and the kinematic viscosity of water 1.141 x 10-6
m/s2.
5.14 A non-Newtonian fluid flows in a pipe أ يد. ليري مائع النل ت ن ف انب ب يرلانا مستقرا5.55
steadily. Find a relationship for the velocity : عالقة لت زلع السرعة اذا كان المائع لتبع القان ن االت
distribution if the fluid obeys the following law:
n
294 τr = K’ (- )
FLOW IN PIPES 5 الجريان في االنابيب
5.15 A cylindrical vessel, diameter 1.52 m, لحتة ي علة1.52 m خزان اس ان المق ع ق ةر5.55
contains cotton-seed oil to a depth of 6.1 m. لةةتم تفرلةةغ الخةةزان خةةالل. 6.1 m زلةةت بةةذ ر الق ةةن بعمةةج
The vessel is emptied through an opening near احسةةب الةةزمن الةةالزم15.8 mm فتحةةة قةةرب القعةةر ق رهةا
the bottom with diameter 15.8 mm. Estimate . 4.57 m ال6.1 m النخفاض عمج الزلت من
the time required for the level of the oil to fall
from 6.1 m to 4.54 m.
Ans ب
1380 s
5.16 A non-Newtonian fluid obeys an algebraic مةةةائع ال نل تةةة ن لتبةةةع معادلةةةة ذات قةةة ة يبرلةةةة كثافتةةةا5.55
power equation; the fluid has density 1014 ق ةةر14.9 m ليةةري ف ة انب ة ب لةةا1041 kg/m3
kg/m3 and it flows in a pipe, 14.9 m long and فةذا, 0.0728 m/s بمت سة سةرعة0.0524 m الةداخل
0.0524 m internal diameter. If the average (K’ = 15.23 N.sn’/m2) (n’ = 2.4) علمةةت ان
velocity is 0.0728 m/s and n’ = 2.4, . احسب مقدار هب الضي
K’ = 15.23 N.sn’/m2 compute the pressure drop
in the pipe.
Ans ب
43.39 kPa
5.17 Water is flowing in a pipe, 150 m long and مثبةةت ف ة0.5 m ق ةةر 150 m انب ة ب لةةا5.55
3
diameter 0.5 m at a rate of 0.5 m3/s. A valve is , 0.5 m /s اذا كةةان المةةاء ليةةري فلةةا بمعةةدل, نهالتةةا صةةمام
attached to the end of the pipe. Calculate the احسب مقدار االرتفاع ف الضةي عنةد غلةج الصةمام فة زمةن
increase in pressure when the valve is closed : قدر
during a period of:
Take the speed of sound in water 1493 m/s. 1493 m/s علما ان سرعة الص ت ف الماء ه
295
FLOW IN PIPES 5 الجريان في االنابيب
Investigate the following topics using the اسةةتخدم االنترنةةت مصةةادر اخةةر للبحةةث فةة الم ضةة عات
internet and other sources of literature. Write a التاللة ثم أعد تقرلرا لكل بحث متضمنا ذكر المصادر المعتمدة
report on your findings including references
5.18.1 List the most important non-Newtonian اذكر اهم الم ائع غلةر النل ت نلةة مةا هة خصائصةها5.18.1
fluids and specify their properties and uses استخداماتها ؟
5.18.2 How do the types and sizes of pipes vary كلةةإ تتبةةالن ان ة اع حي ة م االنابلةةب ف ة الصةةناعات5.18.2
in the oil and petrochemical industries? النف لة الصناعات البتر كلملائلة ؟
5.18.3 Find tables for pipe standard sizes and ا يةةد يةةدا ل تبةةلن حي ة م االنابلةةب القلاسةةلة اشةةرح5.55.5
explain how to use them in practice رلقة استخدامها
5.18.4 The design of drinking water pipe تصملم شبكات ملا الشرب مع تبلان نم ذب للحسابات5.55.5
network; illustrate by a sample of calculations
5.18.5 conduct san instigation about open ايةةري بحث ة عةةن اليرلةةان ف ة القن ة ات المكش ة فة5.55.5
channel flow and its applications ت بلقاتا
5.18.6 What are the latest empirical equations مةةا ه ة اح ةدث المعةةادالت التيرلبلةةة لحسةةاب معامةةل5.18.6
used to estimate the friction factor? Conduct االحتكةةةاك؟ ايةةةري حسةةةابات للمقارنةةةة مةةةع القةةةلم التةةة تعتمةةةد
calculations to compare with the equations المعادالت ف هذا الفصل
mentioned in this chapter
5.18.7 Use of non-circular ducts in industrial اسةةتخدامات القن ة ات ذات المقةةا ع غلةةر الدائرلةةة ف ة5.18.7
plants المصانع
5.18.8 Use Excel to solve problems 5.6 and 5.12 5.12 5.6 استخدم برنام اكسل لحل السؤاللن5.18.8
296
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
297
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
298
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
a change in pressure at one point and then للى نقتاط اخترب بطريقتة مماثلتة للموجتات المائيتة الناتجتة عتن
spreads to the other parts of the fluid. This واذا كان المائ في حالة جريتان فتي, سير قارب في النهر مثالض
phenomenon is similar to the spread of waves انبوب فقد تحصل مثل هذه الموجات بسبب رلم صمام فجتات او
caused by a boat travelling in water. It may .اصطدام المائ بجسم يعيم الجريان
occur in industry as a result of the sudden
closing of a valve or obstructing the flow in a
pipe.
Let us assume that the pressure wave is عبتتترuw لنفتتتر ان موجتتتة ضتتتغط تنتقتتتل بستتترعة قتتتدرها
travelling at a speed uw over a distance dx in a كمتتا هتتو مبتتين فتتيA فتتي متتائ مستتاح مقطع تdx مستتافة
fluid of cross section A as shown in Fig 6.1 6.1 الشكل
Fluid مائ
uw
Wave
موجة
dx
x
Fig 6.1 Transmission of a pressure wave انتقال موجة الضغط من نقطة للى اخرب6.6 الشكل
If the fluid is moving in the opposite direction to فتتاذا كتتان المتتائ يجتتري باالتجتتاه المعتتاكس للموجتتة وبستتترعة
the wave, at the same speed uw, the wave فتتإن الموجتتة تبتتدو كانهتتا فتتي حالتتةuw مستتاوية لستترعتها أي
appears as if it is stagnant. This is because the أي سرعة المائ ناقصا ض سترعة, الن السرعة النسبية, السكون
relative velocity is zero. Now, applying Euler ) و4..3 ( و بتطبيتتم معادلتتة ايتتولر. الموجتتة تستتاوي صتتفراض
equation (4.93), and the energy equation (4.55), ) نتوصتتل للتتى صتتيغة لحستتاب ستترعة4.55( معادلتتة االتصتتال
we can actually develop an equation to : الموجة كاالتي
calculate the speed of the wave as follows:
u + +g =0
299
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Change in position + Change in pressure + تغير في السرعة+ تغير في الضغط+ تغير في الموق
Change in velocity
In this case the wave is moving along the أي ان الموجتة تحتدذ علتى امتتداد, وهنا ليس في الموقت تغيتر
horizontal axis and therefore there is no change : خط افقي لذا
in position.
g =0
uw + =0 (6.1)
G1 = G2
G is the mass flow rate, substituting in terms of نحصل على هو معدل الجريان الكتلي و وبالتعويG
density and velocity
We can ignore the infinitesimal value (dρ duw): : ( لضآلت نحصل علىdρ duw) وباهمال الحد
ρ duw = - uw dρ (6.2)
300
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
It is clear that the change in density and velocity ومن الواضح ان التغير في الكثافة والسرعة يحدذ علتى امتتداد
takes place along the x axis, thus it is possible to دونdx ( علتتى6.2) لتتذا يمكتتن تقستتيم طرفتتي المعادلتتة, x
divide the two sides of the equation (6.2) by dx . حدوذ خلل جبري فيها
without any algebraic concerns.
dρ
ρ = - uw d (6.3)
Substituting ( ) from equation (6.3) into ( متتن قيمتهتتا فتتي6.1) ( فتتي المعادلتتة ) عتتن ثتم نعتتو
uw (- )+ =0
dρ
u w2 d =
d
∴ uw = √ dρ )6.4(
We defined the coefficient of elasticity in و قتتتد عرفنتتتا معامااال المروناااة فتتتي الفصتتتل الثتتتاني بالمعادلتتتة
chapter 2-equation (2.13) as follows: : ( كاآلتي2.13)
E= ρ
Thus, the speed of the wave can be calculated لتتذا يمكتتن حستتاب ستترعة الموجتتة بداللتتة معامتتل المرونتتة وذل ت
in terms of E by substituting for it in equation : (6.4) بالتعوي عن قيمت في المعادلة
(6.4): E = ρ √
uw = √ (6.5)
301
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
uw = √ (6.6)
The ideal gas equation at a constant , وفي حالتة كتون الغازرتازاض مثاليتا ض و ثابتتا ض فتي درجتة حرارتت
temperature is written in the following format: : تكتب معادلة الغاز المثالي بالصيغة اآلتية
Pv=C
The constant C is equal to (RT), or in this case: : ) في هذه الحالةRT( هو مقدار ثابت يساويC
=C
Considering P/ρ constant in equation (2.13) will ( يصبح معامتل المرونتة2.13) ثابتا في المعادلةP/ρ واذا عد
give the equation of the coefficient of elasticity : للغاز المثالي اآلتي
for an ideal gas as follows:
E=ρ =ρ
∴E=P (6.7)
Substituting E in equation (6.6) for an ideal gas: : ( للغاز المثالي6.6) في المعادلةE عن ثم نعو
uw = √ (6.8)
302
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Under isentropic conditions, that is at constant : اي ثبوت االنتروبي فلدينا, اما تحت الظروف االيسنتروبية
entropy, we have:
P vγ = C
E=γP (6.9)
The speed at which the wave travels will be فتتيE عتتن وهكتتذا تصتتبح ستترعة انتقتتال الموجتتة بعتتد التعتتوي
obtained by substituting E in equation (6.6): : (6.6) المعادلة
uw = √γ (6.10)
It is noted that equation (6.10) provides the ( تعطتي سارةة الموجاة بتافترا6.10) و يالحظ ان المعادلتة
wave speed for adiabatic conditions. This is وهتذا افتترا معقتول الن, انهتا تستري بتدون تبتادل حتراري
reasonably accurate, because the wave moves الموجتتات تنتشتتر بستترعة عاليتتة فتتال زمتتن يكفتتي النتقتتال كميتتة
at such a high speed, allowing no time for heat . الحرارت الالزمة البقاء درجة الحرارت ثابتة
transfer to maintain isothermal conditions.
303
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Solution الحل
a- Assume that the speed of sound is نفتتتر ان ستترعة الصتتوت تستتاوي ستترعة موجتتة-أ
equal to the speed of the pressure wave ضغط في الهواء
in air نفتتتر ان انتقتتال الصتتوت فتتي الهتتواء يحتتدذ تحتتت-ب
b- Assume that sound travels in air at a ظروف ثبوت االنتروبي
constant entropy نفتر ان الهواء يتب قانون الغازات المثالية-ت
c- Assume that air obeys the ideal gas
laws
uw = √γ
Pv=RT
R = 286.689 J/kgK
γ = Cp/Cv and Cp – Cv =R
γ=
304
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Substituting: : نعو
γ=
γ = 1.405
We now apply equation (6.11) to calculate the باستتتخدام المعادلتتةuw اآلن نستتتطي حستتاب ستترعة الصتتوت
speed of sound uw: (6.11)
uw = √
uw = 331.6 m/s
Comment مالحظة
If it is required to calculate the speed of sound اذا كان المراد حساب سرعة الصوت في سائل فتيمكن استتخدام
in a liquid, equation (6.5) will be used instead of (6.11) ( بدالض من المعادلة6.5) المعادلة
(6.11)
Mach number is the ratio of the velocity of fluid رقم ماخ هو النسبة بين سرعة المائ في نقطة معينة للى سرعة
at a certain point to the speed of sound at the : اذن, الصوت في تل النقطة
same point, thus:
Ma = u/uw (6.12)
Substituting uw in equation (6.12) using (6.12) ( فتي المعادلتة6.10) من المعادلةuw وبالتعوي عن
equation (6.10), we can write: : نحصل على
Ma = (6.13)
√
Compressible flow is classified according to the : يصنف الجريان االنضغاطي حسب قيمة رقم ماخ كاآلتي
value of Mach number as follows:
305
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
a- Subsonic flow , Mach number is less أ -الجريااان دون الصااوتي عنتتدما تكتتون قيمتتة رقتتم متتاخ
)than one (Ma < 1 اصغر من الواحد ,أي )(Ma < 1
)b- Sonic flow (Ma = 1 ب -الجريان الصوتي )(Ma = 1
)c- Supersonic flow (Ma > 1 ت -الجريان فوق الصوتي )(Ma > 1
6.4 Constant temperature gas flow in 6.6جريان الغااز بثباوت درجاة الحارارة فاي
)pipes (Isothermal flow االنابيب ( الجريان االيسوثرمي)
We can write a general equation for استتتناداض للتتى معادلتتة الطاقتتة ,التتتي درستتناها فتتي الفصتتل
الرابت ,يمكننتتا التوصتل للتتى معادلتة عامتتة تختص جريتتان
compressible flow in pipes according to the
الموائ االنضتغاطية فتي االنابيتب ,وستنبدأ بالصتيغة التتي
energy equation, covered in chapter 4; let us
وردت في المعادلة ( )4.73وهي :
start with equation (4.73) which is:
For a gas flowing in a pipe having length l and فاذا كان الغاز يجري في انبوب طول lو قطره , dكما
diameter d as shown in Fig 6.2, the friction هو مبين في الشكل , 6.2يمكتن حستاب خستائر االحتكتا
losses in an infinitesimal length dl, can be استتتتناداض للتتتى المعادلتتتة ) (5.9فتتتي جتتتزء متنااااهي الصاااغر
estimated by applying equation (5.9) as follows: طول dlكاآلتي :
الضغط Absolute
المطلم pressure
dl
306
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
dl ̅
δLf = 4f d (6.14)
Substituting δLf in the energy equation: : في معادلة الطاقة نحصل علىδLf عن وبالتعوي
dl ̅
d(u̅ ) + g dz + v dP + 4f =0 (6.15)
d
Where: Ws = 0
We know that the velocity of the gas varies نعلم ان سرعة جريان الغاز تتغير على امتداد االنبتوب لتذا
along the pipe length and therefore it is not ( ولكتن نستتطي التعتوي6.15) ال يمكن مكاملة المعادلة
possible to integrate equation (6.15). التذي يبقتىG عن السرعة بداللة معتدل الجريتان الكتلتي
However, we can substitute the velocity by : علما ض ان, ثابت اثناء الجريان
the mass flow rate G, which remains
constant, and knowing that:
G = u̅ A ρ
G = u̅ A/v (6.16)
اذن
Thus
u̅ = G v/A (6.17)
أو
or
u̅ = 4G v/πd2 (6.18)
307
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Substituting u
̅ in equation (6.15) using uفتتي المعادلتتة ) (6.15متتن المعادلتتة
وبتتالتعوي عتتن ̅
equation (6.17): ) (6.17ينتج :
Dividing equation (6.19) by v2 and ignoring نقستم المعادلتة ) (6.19علتى v2ونهمتل الحتد )(g dz
(g dz), because the pipe is considered to be حيذ عد االنبوب افقيا ض ,ثم نجري عملية التكامل :
horizontal, we can then integrate to obtain:
( )2 ln ∫+ + 2f ( )2 =0 )(6.20
Equation (6.20) is the general format for the تمثتتل المعادلتتة ) (6.20صتتيغة عامتتة لمعادلتتة الطاقتتة التتتي
energy equation of compressible flow in تختتص الجريتتان االنضتتغاطي فتتي االنابيتتب ,ويمكتتن اتمتتام
pipes. The equation can be integrated after التكامل بعد تحديتد العالقتة بتين الضتغط والحجتم النتوعي .
defining the relationship between pressure ففتتتي حالتتتة الجريتتتان بثبتتتوت درجتتتة الحتتترارت (الجريتتتان
and specific volume. For example, if the االيستتوثرمي) يمكتتن تحديتتد العالقتتة بتتين الضتتغط والحجتتم
flow is isothermal, the ideal gas equation at النوعي حسب سلو الغاز ,فاذا كان سلوكا ض مثاليتا ض تطبتم
معادلة الغاز المثالي بثبوت درجة الحرارت وهي
constant temperature (P v = C) will apply.
)(P v = C
∫( By substituting v; the integral ) ∫ ( كاآلتي: عن vيصبح التكامل ) وبالتعوي
becomes:
308
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Thus: اذن:
So, the equation for isothermal flow of an وعلي تصبح معادلتة الطاقتة لجريتان الغتاز المثتالي بثبتوت
ideal gas in a horizontal pipe will be: درجة الحرارت في انبوب افقي اآلتي :
( )2 ln + + 2f ( )2 =0 )(6.24
Substituting ( ) using (P1 v1= P2 v2) and متتن ) (P1 v1 = P2 v2و ( عتتن ) وبتتالتعوي
( considering the flow turbulent =1) we باعتبار الجريان جريانا ض اضطرابيا ض ) ( =1نتوصتل للتى
can write: الصيغة االتية :
( )2 ln + + 2f ( )2 =0 )(6.25
)We can substitute (P1.v1) in terms of (R0.T1 و يمكتتتتتن التعتتتتتوي عتتتتتن ) (P1.v1بداللتتتتتة )(R0 .T1
باستتخدام قتانون الغتاز المثتالي ) , (P v = R0 Tواذا كتان
using the ideal gas law (P v = R0T) and to
المراد حساب هبوط الضغط فتي االنبتوب فالحتل ستيتطلب
estimate the pressure drop in the pipe, we
استخدام طريقة التجربة والخطا ,و يمكن احيانا ض االستفادت
must apply the trial and error method.
309
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
We can also simplify the calculations by ( اليجتتاد6.25) متتن اهمتتال حتتد الطاقتتة الحركيتتة فتتي المعادلتتة
ignoring the kinetic energy term in equation ولكن بعد انتهاء الحل يجب حساب قيمة الطاقتة. هبوط الضغط
(6.25). This assumption must be justified by ([ الثبتات ان قيمتهتا صتغيرت )2 ln ] الحركيتة متن
computing the kinetic energy using
اما اذا كانت عكس ذل فيستتلزم الرجتوع, بحيذ يمكن اهمالها
[( )2 ln ] to show that the value is . للى طريقة التجربة و الخطا النجاز الحل
small. However, if the value is significant,
the trial and error technique should be used
to solve the problem.
Another method to estimate the pressure وهنا طريقة اخرب لحساب هبوط الضغط على استاس معادلتة
drop is to apply the energy equation اذ يفتتتر جريتتان الغتتاز فتتي االنبتتوب جريان تا ض ريتتر, الطاقتتة
assuming the flow is incompressible. This أي بمعنى اخر تهمل تغيترات الحجتم النتوعي علتى, انضغاطي
implies that the changes in specific volume ويعد هذا االفترا صحيح في حالة انخفا. امتداد االنبوب
values along the pipe are considered ويحستب متوساط الحجام. الضغط مقداراض ضئيالض اثناء الجريتان
negligible. The assumption is valid for small : منvm النوةي
pressure changes along the pipe. The mean
specific volume vm is calculated by the
following relationship:
vm = P1 v1 (6.26)
The term ( ) of equation (6.25) can : ( كاآلتي6.25) ( في المعادلة ) كما يمكن تحليل
be factorized as follows:
Combining equations (6.25), (6.26) and ( نحصل على6.27) , (6.26) , (6.25) وبدمج المعادالت
(6.27), we obtain
( )2 ln + + 2f ( )2 =0 (6.28)
310
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
The small change in the value of the pressure وان حصول هبوط في الضغط ضئيل المقدار في االنبوب يعني
drop along the pipe indicates that the absolute لتذا يمكتن اهمتالP2 مقاربتة لقيمتةP1 ان قيمة الضغط المطلتم
pressure P1 is closer in value to P2. : ([ فتصبح المعادلة )2 ln حد الطاقة الحركية
Consequently, the kinetic energy term
[( )2 ln can be ignored and the equation
will change to:
+ 2f ( )2 =0 (6.29)
or أو ان
P1 – P2 = 2f ( )2 vm (6.30)
- ∆Pf = 2f ( )2 vm = 0 (6.31)
It can be noted that equation (6.31) is similar to ( المستتخدمة5.8) ( مماثلة للمعادلتة6.31) و يالحظ ان المعادلة
equation (5.8) which is used to estimate the لحساب هبوط الضغط لمائ ريتر انضتغاطي يجتري فتي انبتوب
pressure drop of an incompressible fluid in a حيذ, معين
pipe, where
ρ ̅
u
( )2 vm = ( )2 = ρm u̅
ρm is the mean density of the gas equal to . (1/vm) وهي تساوي, هي متوسط كثافة الغازρm
(1/vm).
311
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Solution الحل
Given: : المعلوم
Assumptions
االفتراضات
a- Air is an ideal gas الهواء راز مثالي-أ
b- Isothermal flow of a compressible fluid متتائ انضتتغاطي يجتتري فتتي االنبتتوب بثبتتوت درجتتة-ب
c- One dimensional turbulent flow الحرارت
d- جريان اضطرابي ببعد واحد و مستقر-ت
( )2 ln + + 2f ( )2 =0
In this problem we have the three unknowns G, ولمتا كتان الحجام G ,v1 , f و لكن لدينا ثالثتة مجاهيتل هتي
v1 and f. The molar volume is given, therefore باستتتخدام قتتوانين الغتتازv1 المااولي معلتتوم لتتذا نستتتطي حستتاب
we can compute v1 using the following ideal gas : المثالي االتية
laws:
312
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
P V = n R0 T
Pv=RT
In the above equations, v is the specific volume التتيm3/kmol هتو رمتز الحجتم النتوعي بوحتداتv و هنا
in m3/kmol which should be converted to : ثابت لذا يمكن كتابةR0 وبما انm3/kg يجب ان تحول للى
m3/kg. Since R0 is constant, we can write:
= (6.32)
The numerals 1 and 2, in equation (6.32), ( للتى انتقتال الغتاز6.32) فتي المعادلتة2 و1 و يشير الرقمتانن
indicate that the ideal gas is changing from v2 فتاذا اعتبرنتا. المثالي من ظروف الحالة األولى للى الثانيتة
state 1 to state 2. If we consider the molar و273 K الحجتتم المتتولي وهتتو يعطتتى عتتادت بدرجتتة حتترارت
volume v2 at 273 K and 101.3 kP, we can then 293 K بدرجة حرارتv1 يمكننا حساب101.3 kPa ضغط
calculate v1 at 293 K and 1 kP as follows: : كاآلتي1 kPa وضغط
v1 = 2435.355 m3/kmol
Dividing v1 by the molecular weight M we نحصتتل علتتى الحجتتمM علتتى التتوزن الجزيئتتيv1 و بتقستتيم
obtain the specific volume in m3/kg. . m3/kg النوعي بوحدات
There are now two unknowns in equation لتتذل ستتنحلها, ( مجهتتوالن6.25) و االن يبقتتى فتتي المعادلتتة
(6.25), therefore we need to apply the trial and فسنفر قيمة لترقم رينولتدز ونوجتد. بطريقة التجربة والخطا
error method to solve the problem. We assume ( متنG/A) ثتم نحستب قيمتة المقتدار5.7 متن الشتكلf قيمة
a value for Reynolds number and find f from Fig فاذا كانت قيمت مقاربة, Re ( و منها قيمة6.25) المعادلة
5.7 and then evaluate (G/A) using equation
(6.25); this will lead to a calculated Re. If the
313
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
new calculated Re is close to the assumed وبعكس نعيد الحستابات, للقيمة المفترضة نتوقف و ننهي الحل
value, we end the calculations. If the values . على اساس القيمة الجديدت لرقم رينولدز وهكذا
differ, we repeat the computations, based on
the calculated Re, and continue until the last
two values of Re are close enough to end the
calculations.
̅
Re =
u̅ = Q/A = G/ρ A
( )
∴ Re = (6.33)
Let us assume a value for Re which is 105, then منf و نجد قيمة105 تساويRe نفتر اوال ان قيمة
find f from Fig 5.7, which is 0.006 ثم, على وج التقريب....6 و هي تساوي5.7 الشكل
approximately. Now, we calculate (G/A) using ( و قيمة6.25) ( من المعادلةG/A) نحسب قيمة المقدار
equation (6.25) and Re using equation (6.33). . (6.33) من المعادلةRe
Substituting for the known values in equation : (6.25) في المعادلة نعو
(6.25):
( ) ( )
( )2 ln + + 2 x 0.006 ( )( )2 =0
Giving
ومنها
Re = = 1.14 x 104
314
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
We can see that the value of the assumed هتي عاليتة و نختتار105 المفترضتةRe اذن نستنتج ان قيمتة
Re = 105 is high. Thus, we take the calculated وباعادت الحسابات1.14 x 104 القيمة الجديدت و لتكن مساوية
Re = 1.14 x 104 as the new value and repeating . ( تقريبا ضf = 0.0082) نجد ان, على نفس المنطم السابم
the computations we find (f = 0.0082) 1.26 kg/m2s ( الجديتدت تستاويG/A) وان قيمة المقتدار
approximately. The new value of (G/A) is 1.26 (6.33) من المعادلةRe ومرت ثانية نحسب
kg/m2s. Once again we calculate Re from
equation (6.33)
Re = = 1.04 x 104
The value of the newly calculated Re is close to اذن الجواب هو1.14 x 104 وهي مقاربة للى
1.14 x 104 . Thus the answer will be:
G/A = 1.26 kg/m2s
Comments
مالحظات
a- To solve compressible flow problems يستتتخدم الضتتغط المطلتتم دائمتا ض لحتتل مستتائل الجريتتان -أ
you must always work with absolute .(P1/P2) و ذل لوجتود نستبة ضتغط, االنضغاطي
pressure. One of the reasons is the و كذل بسبب استخدام قوانين الغازات
inclusion of the pressure ratio (P1/P2).
Also, the ideal gas laws are required for
the solution.
( احيانا ُ بالسرةة الكتليةG/A) يعرف المقدار-ب
b- The ratio (G/A) is sometimes called the
mass velocity
Exercise تمرين
Solve example 6.2 using Excel. . مستخدما برنامج االكسل6.2 اعد حل المثال
315
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
If the absolute pressure required to deliver the افتتر ان الغتاز هنتا متائ. ضغط الغتاز عنتد محطتة الضتغط
gas is 170 kPa, what will be the pressure at the ريتتر انضتتغاطي يجتتري بثبتتوت درجتتة الحتترارت متختتذا ُ كثافتتت
compressor station? Assume the gas is , 0.11 mNs/m2 و لزوجت0.677 kg/m3
incompressible with a density 0.677 kg/m3, (e/d = 0.001) وان
viscosity of 0.11 mNs/m2 and (e/d = 0.001)
Solution الحل
Given:
المعلوم
Assumptions االفتراضات
a- Methane is an incompressible fluid الميثان مائغ رير انضغاطي-أ
الجريان يحدذ بثبوت درجة الحرارت-ب
b- Isothermal flow
جريان اضطرابي ببعد واحد مستقر-ت
c- One dimensional turbulent flow
( )2 ln + + 2f ( )2 =0 Eqn. 6.28
We now compute Reynolds number to find f f ايجاد قيمة اآلن نحسب رقم رينولدز لغر
( )
Re =
316
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Re = = 6.53 x 106
e/d = 0.001
The value of f from Fig 5.7 is 0.0028 ....26 تستتاوي5.7 متتن الشتتكلf واالن نالحتتظ ان قيمتتة
approximately, and by substitution in equation (6.28) وبالتعوي في المعادلة
(6.28) we obtain:
This equation can be solved by another trial and يمكن حل المعادلة اعاله باستخدام طريقتة ثانيتة متن التجربتة و
error method. This method is based on الخطا حيذ ينجز الحل على اساس افترا قيم مختلفة للضغط
assuming values for P1 , substituting them in the وفتتي هتتذه الحالتتة, حت تى يتستتاوب طرفتتا المعادلتتة المتتذكورتP1
equation and calculating both sides of the :نحصل على الجواب وهو
equation. The iterations continue until the two
sides are nearly equal.
Comment مالحظة
If equation (6.29) was used, the answer would 762 kPa ( سنجد الجواب يصبح6.29) اذا استخدمنا المعادلة
have been 762 kPa. Consequently, the kinetic وبعد حساب مقدار الطاقتة الحركيتة ستنجد قيمتهتا كبيترت نستبيا ض
energy term calculated, based on this value, . بحيذ ال يمكن اهمالها
would be so large that it is would not be
possible to ignore.
تمرين
Exercise
. 6.3 استخدم برنامج اكسل لحل المثال
Use Excel to solve example 6.3.
317
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
6.5 Variable temperature flow of an الجريان بتغير درجة الحرارة لغاز مثالي في6.6
ideal gas in a horizontal pipe انبوب افقي
The gas flow in long pipelines is normally علتتى التتررم متتن ان جريتتان الغتتاز فتتي االنابيتتب الطويلتتة يحتتدذ
considered isothermal; however, in many flow لال ان درجتة الحترارت قتد تتغيتر, بثبوت درجة الحترارت تقريبتا ض
systems the temperature may change along the ويعنتتي ثبتتوت درجتتة الحتترارت. فتتي كثيتتر متتن حتتاالت الجريتتان
flow line. Constant temperature implies that اقتران الجريان بانتقال حرارت متن او التى المحتيط عبتر جتدران
the flow is accompanied by heat transfer from اما في حالة ةزل االنبوب حرارياً فان درجتة حترارت. االنبوب
الغاز ستتغير على امتتداد االنبتوب ويصتبح الجريتان اديباتياا او
or to the surroundings through the pipe wall.
وتعتمتتد صتتيغة العالقتتة بتتين. جريان تا ض متتن دون تبتتادل حتتراري
If the pipe is thermally insulated, the gas
علتتتى مقتتتدار انتقتتتال, الحجتتتم والضتتتغط فتتتي حالتتتة تمتتتدد الغتتتاز
temperature will change along the length of the
( تعنتي4.37) فقد تبين في الفصل الراب ان المعادلتة, الحرارت
pipe, and the flow will be called adiabatic,
, ثبتتوت درجتتة الحتترارت ووجتتود تبتتادل حتتراري بتتنفس الوقتتت
meaning no heat exchange with the
surroundings. The relationship between P v = C : وهي
pressure and volume, in this case, will depend
on the amount of heat transferred. It was noted
in chapter 4 that equation (4.37) applies to
constant temperature and heat exchange at the
same time, the equation is: Pv=C
Thermal Insulation
Pv=C
العزل الحراري
Equation (4.47) applies to a condition of heat ( تعنتتتي وجتتتود انتقتتتال حتتترارت مصتتتحوبا ض4.47) و المعادلتتتة
exchange accompanied by changes in : بتغير درجة الحرارت وهي
temperature, the equation is:
P vk = C
We can substitute the above relationships into ( حستتتب6.20) ويمكننتتتا استتتتخدام هتتتذه العالقتتتات فتتتي المعادلتتتة
equation (6.20) according to the flow ظروف الجريان و على ررار ماعملنا ب للجريان بثبوت درجة
conditions, as we did for the isothermal flow. . الحرارت
318
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
For example, if the relationship between فمثال ُ اذا كانتت عالقتة الحجتم بالضتغط متمثلتة بالمعادلتة
volume and pressure is (P vk = C), we will obtain: : ( فنجد انP vk = C)
By combining equations (6.20) and (6.34), the ( للتعتوي عتن التكامتل6.34) ( و6.20) و بدمج المعتادلتين
energy equation for the compressible flow تصتتتبح معادلتتتة الطاقتتتة للجريتتتان االنضتتتغاطي تحتتتت مثتتتل هتتتذه
under such conditions will be: : الظروف اآلتي
The maximum flow rate will occur when the ويحدذ اقصى جريان للمائ عند بلورت سترعة تستاوي سترعة
velocity is equal to the speed of sound uw. In بطريقتتةuw وفتتي هتتذه الحالتتة تحستتب الستترعة, uw الصتتوت
this case uw is calculated by an equation similar : ) أي6.1.( مماثلة للمعادلة
to equation (6.10), which is
uw = √ (6.36)
Isentropic flow is an adiabatic frictionless flow هو جريان اديباتي اي بدون تبادل حراري و بدون احتكاك يتب
and obeys the relationship (P vγ = C). Thus, we لتذا يمكتن التوصتل للتى معادلتة الطاقتة, (P vγ = C) القتانون
can obtain the energy equation for such flow by و اهمتال االحتكتا فتيk محتلγ لمثل هذا الجريان باحالل
replacing k in equation (6.35) with γ and : اي, (6.35) المعادلة
ignoring the friction term, as follows:
( )2 ln + [( )(γ+1)/γ -1] + 2f ( )2 =0
319
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
We can introduce Mach number, so that the و يمكن استخدام صيغة تضم رقم ماخ ابتداء متن معادلتة الطاقتة
energy equation given in equation (4.73), will : ( التي تصبح بعد تبسيطها4.73) المتمثلة بالمعادلة
take the following format:
u̅ du̅ + vdP = 0
̅
∴ d( ) + v dP = 0
The above equation is used to determine the تستخدم مثل هذه الصيغة لحساب سرعة مرور الغاز فتي منفا
velocity of a gas passing through a converging وتجتتري مكاملتتة للمعادلتتة بتتين. ملااتم متصتتل بختتزان متتثالض
nozzle attached to a storage vessel. The ) والظتتروف عنتتد متترور الغتتاز فتتي1( الظتتروف فتتي الختتزان
integration is performed, for the conditions of : ) على النحو األتي2( المنفذ
the vessel (1) and the conditions during the
passage of the gas through the nozzle, as
follows:
u
̅
∫ d( ) =∫ d
P vγ = C
∴ = C’/P1/γ
P vγ = C
̅ 1/γ
C’ = v P = -=vv1PP1 1/
1/γγ = v2 P21/γ dP
= C’ ∫ 1 1 ∫
∴ = C’/P1/γ
̅
- C’ ∫ = - v1 P11/γ ∫ dPu
̅
[1- ( ) γ ]
( -1)/γ
u̅ = (6.37)
320
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Ma =
√
u̅ = (Ma2)2 (γ P2 v2)
So, equation (6.37), in terms of Ma2, will be اآلتيMa2 ( بداللة6.37) وهكذا تصبح المعادلة
γ
[1- ( ) γ ]
( -1)/γ
Ma22 = (6.38)
( )
Rearranging equation (3.38) and substituting (v1/v2) عتن ( وبتالتعوي6.38) و باعتادت ترتيتب المعادلتة
(v1/v2) with (P2/P1)1/γ, we obtain ( نحصل علىP2/P1)1/γ بالمقدار
[( ) γ
( -1)/γ
Ma22 = -1 ] (6.39)
( )
∴ ( )(γ -1)/γ = Ma22 + 1
( )
= [( Ma22 + 1]γ (γ-1) (6.40)
It is worth noting that maximum velocity occurs و تجدر االشارت للى ان اقصى سرعة للجريان في عنم المنفتذ
in the nozzle throat which is actually sonic فتي العنتم تستتاويMa أي ان قيمتة, هتي السارةة الصاوتية
velocity. This means that the value of Mach حيذ يرمتز, وفي هذه الحالة تنتج الظروف الحرجة, الواحد
number in the throat is equal to 1 and therefore ( نسبةP∗/P1 ) وتسمى النسبة, P∗ للضغط في عنم المنفذ
critical conditions will prevail. The ratio (P∗/P1) , الضغط الحرجة
is called the critical pressure ratio,
321
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
denoted rc. Introducing rc into equation (6.40), : ( تصبح النسبة6.40) في المعادلة و بالتعوي. rc يرمز لها
we obtain:
rc = P∗/P1 = ( )γ (γ – 1) (6.41)
Unlike isentropic flow, adiabatic flow is يختلف هذا الجريان عتن الجريتان بثبتوت االنتروبتي بحقيقتة انت
accompanied by changes in entropy; this means وهذا يعني عدم اهمتال تتاثير االحتكتا اثنتاء, متغير االنتروبي
friction is significant and can’t be ignored. A ومثال ذلت جريتان الغتاز فتي انبتوب طويتل معتزول, الجريان
good example is the gas flow in a long thermally حراريا ض حيذ يدخل الغاز بضغط معين و درجة حرارت معينة و
insulated-pipeline. The gas enters the pipeline يجتتري بمعتتدل يتحتتدد حستتب كتتل متتن طتتول االنبتتوب و قطتتره و
at certain pressure and temperature; it flows at ففتتي االنبتتوب الممتتتد لمستتافة بعيتتدت. مقتدار الضتتغط فتتي نهايتيت
a rate defined by the length and diameter of the قتد تصتل سترعة, والذي يكون ضتغط الغتاز فتي نهايتت واطئتا
لكتتن اليمكتتن لستترعة الجريتتان ان. الغتتاز للتتى ستترعة الصتتوت
pipe plus the pressure values at the inlet and
فمتثالض اذا, تفتوم السترعة الصتوتية فتي اي حتال متن االحتوال
outlet. In a long pipeline, the velocity may
دخل الغاز في االنبوب بسرعة فوم صوتية فان معدل الجريتان
approach the speed of sound, particularly if the
سيتغير بحيذ تنخفص السرعة للى السترعة الصتوتية التتي تعتد
pressure is low at the far end. In any case, the
. اقصى سرعة لجريان الغاز في االنابيب ثابتة المقط
velocity will never exceed the sonic velocity,
and if the gas enters the pipe with a supersonic
Air هواء
velocity, the flow rate will change so that the
velocity is reduced to the sonic value; the sonic
velocity is the maximum gas velocity in pipes of umax = uw
Since the temperature varies along the length ولما كانت درجة الحرارت متغيرت علتى امتتداد االنبتوب فستتتاثر
of the pipeline, the viscosity will be affected and لزوجة المائ و يصبح كل من رقم رينولدز و معامل االحتكتا
hence the Reynolds number and the friction بحيتذ, ولكن التاثير يكون عتادت ضتئيالض, متغيرين في المقدار
factor will vary in value. However, the variation وتجتدر مالحظتة أن مقتدار معتدل الجريتان لغتاز. يمكن اهمالت
is small enough to be ignored. But, it is worth مثتتالي فتتي انبتتوب يستتبب هبوطتا ض معينتا ض فتتي الضتتغط أعظتتم حتتين
noting that the flow rate for an ideal gas in a يكتتون الجريتتان خالي تا ض متتن التبتتادل الحتتراري مقارنتتة بالجريتتان
pipe causes a higher pressure drop for adiabatic وعلى التررم متن أقصتى مقتدار للفترم, بثببوت درجة الحرارت
flow compared to isothermal flow. Despite the أال ان الفرم في معظم حاالت الجريان20% بينهما هو بحدود
fact that the maximum difference is around . 5% اليتجاوز
20%, it does not normally exceed 5%.
322
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Based on that and regardless of the conditions, ُ وبنتتاء علتتى ذل ت نجتتد افتتترا الجريتتان فتتي األنابيتتب جريان تا
we find that the assumption of isothermal يعتتط نتتتائج, ومهمتتا تكتتن الظتتروف, بثبتتوت درجتتة الحتترارت
conditions provide acceptable results for most . مقبولة في أرلب مسائل جريان الغاز
cases of flow problems.
Substituting γ for k in equation (6.35) will نتوصتلk محتلγ ( بعتد احتالل6.35) و باستخدام المعادلتة
offer approximate values for the flow rate of a للتتى نتتتائج تقريبيتتة لحستتاب معتتدل جريتتان الغتتاز تحتتت ظتتروف
gas in an insulated pipeline. We can use the و يمكن التوصل للى نتائج اكثر دقة باستخدام, العزل الحراري
:الطريقة اآلتية ألجراء التحاليالت
following analysis to get more accurate results:
Starting with the energy equation in the format: : نبدأ بمعادلة الطاقة بالصيغة
For turbulent gas flow in a horizontally واذا اعتبرنتتا جريتتان الغتتاز اضتتظرابيا ض فتتي انبتتوب أفقتتي معتتزول
insulated pipe of an unvarying cross section the :حراريا ض وثابت المقط سنختصر المعادلة للى
equation will be reduced to:
dH + ̅u du̅ = 0 (6.42)
أو
or u
̅
dH + d( ) = 0
dH + d( ) 2= 0
: وباجراء التفاضل
Differentiating:
dH + ( ) 2 v dv = 0 (6.43)
323
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
H=U+Pv
∴ dH = dU + d(P v)
Substituting dU and dH using the two equations (4.2. و4.26) متتن المعتتادلتينdH وdU نعتتو عتتن
(4.26) and (4.29): : فنحصل على
CP dT = Cv dT + d (Pv)
( )
dT = (6.44)
: و المعلوم أن
We have:
dH = Cv dT + d (P v)
( )
dH = Cv + d(P v)
dH = d(P v) ( + 1)
: و لما كان
Since:
γ = CP/Cv
Thus: : اذن
dH = d(P v) (6.45)
324
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Substituting dH defined in equation (6.45) into ( فتتتي المعادلتتتة6.45) متتتن المعادلتتتةdH عتتتن و بتتتالتعوي
equation (6.43): : (6.43)
γ
( ) 2 v dv + γ d(P v) = 0 (6.46)
γ γ
( ) 2 v12 + γ (P v) = ( ) 2 v12 + γ (P1 v1) = C (6.47)
C is a constant, and simplifying equation (6.47), : (6.47) ومن المعادلة, مقداراض ثابتا ضC حيذ يمثل الرمز
we get:
P= [ - ( )2 v ] (6.48)
P= [ - ( )2 v ] (6.48)
2
dP = [- - ( ) ] dv
γ 2
γ
[-
dP =
- ( ) ]2 dv
[- - ( ) ] dv
(6.49)
d γ γ 2
∫ = γ γ
[ [( - - )( - )2( ) ]ln
dv ] (6.50) (6.50)
325
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
C can be evaluated from equation (6.48) as: : ( هي6.48) من المعادلةC و ان قيمة الثابت
Substituting C will change equation (6.50) to the : اآلتيC عن قيمة ( بعد التعوي6.50) اذن تصبح المعادلة
following format: C = ( ) 2 v12 + (P1 v1)
d γ
C = ( ) 2 v12 + (P1 v1)
∫ =
γ
[ ) (v1 /4) (
2 2
)+ (P1 v1) ( ) - ( )2 ln ]
( )
d γ
∫ = γ
[ )2 ( – 1 -2 ln ) + (P1 v1/2) ( ) (6.51)
d
Now we substitute for the value of the integral (6.51) ∫ متن المعادلتة عن قيمتة التكامتل واآلن نعو
d γ
∫
d ∫ = (6.51)
of equation γ
) equation
2
[ into ( – 1 -2 ln
(6.20): ) + (P1 v1/2) ( ) : )6.2. ( في المعادلة
(6.51)
( )2 ln + +( )2 ( – 1 -2 ln ) + (P1 v1/2) ( ) + 2f ( )2 =0
(6.51)
: و بالتبسيط
Simplifying further:
4f =[ + ( )2 ] [1 - ( )2 ] - ln (6.52)
326
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Equation (6.52) is used to estimate the mass أو, G ( لحساب معتدل الجريتان الكتلتي6.52) تستخدم المعادلة
flow rate G. Also, it can be used to determine فتتي نهايتتةv معلومتا ض يمكتتن حستتاب الحجتتم النتتوعيG اذا كتتان
the specific volume v at the end of the pipe if G كمتتا يمكتتن ايجتتاد اقصتتى معتتدل جريتتان فتتي االنبتتوب. االنبتتوب
is known. The maximum flow rate of a gas in a . ( الصتتفر ) ( ومستتاوات المقتتدار6.52) بمفاضتتلة المعادلتتة
pipe can be computed by differentiating ( نجد اقصى الجريان حادثتا ُ حتين6.10) وباالستعانة بالمعادلة
equation (6.52) and setting ( ) = 0. We will find
√γ تصبح سرعة الجريان مساوية للسرعة الصوتية
the maximum flow rate is achieved when the
velocity is equal to the sonic velocity, defined
as √γ .
Density of air in the second vessel = 106 .156 kg/m3 = كثافة الهواء في الخزان الثاني
Solution الحل
Given: : المعلوم
Assumptions: :االفتراضات
327
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
a- Constant viscosity, thus independent of أي ال تتاثر بدرجة الحرارت, تعد اللزوجة ثابتة-أ
temperature ) يعد الجريان جريانا ض بدون تبادل حراري ( ديباتي-ب
b- Adiabatic flow
: ( وهي6.52) نستخدم المعادلة
Applying equation (6.52):
4f =[ + ( )2 ] [1 - ( )2 ] - ln
We first estimate v1 using equation (6.32) (6.32) أوالض باستخدام المعادلةv1 نجد
We will take v2 as the molar volume at STP, P2 هتوP2 مساويا ض الحجم المولي بتالظروف القياستية وv2 نتخذ
to be the atmospheric pressure (101.3 kPa) and درجاة الصافر المطلاقT2 ( و101.3 kPa) الضغط الجوي
T2 the absolute zero (273 K). . (273 K)
v1 = 0.241 m3/kmol
328
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
= CP (Eq. 4.33)
dS = (Eq. 4.22)
dH = dU + P dv + v dP (6.53)
dU = dq – dw
329
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
dq = T dS
Substitution in the first law will give: : في القانون األول لداينمي الحرارت نحصل على و بالتعوي
dU = T dS – P dv (6.54)
We then substitute dU in equation (6.53) (6.53) في المعادلة dU عن ثم نعو
dH = T dS – P dv + P dv + v dP
∴ dH = T dS + v dP (6.55)
Combining the two equations (6.55) and (4.35): : ( نحصل على4.35) ( و6.55) وبدمج المعادلتين
CP dT = T dS + v dP
or وبصيغة ثانية
dS = CP - dP )6.56(
dS = CP - R dP
330
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Considering CP and R constants; integration : ثوابتR وCP وباجراء التكامل على أن
yields:
S = CP ln - R ln (6.57)
P0 and T0 represent the pressure and مقتدار الضتغط ودرجتة الحترارتT0 وP0 حيذ يمثل كل من
temperature when the entropy is assumed وتمثتتتل. عنتتدما يفتتتتر أن مقتتتدار االنتروبتتتي يستتتاوي صتتتفراض
equal to zero. Equation (6.57) is actually a ( عالقة لرسم خط فانو كما هو مبتين فتي الشتكل6.57) المعادلة
relationship to draw the Fanno line, as shown in . 6.3
Fig 6.3.
T
H
Ma <1
Ma =1
Ma >1
331
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
The Fanno line clearly shows, that if the gas و يتضح من خط فتانو أنت اذا دختل الغتاز للتى االنبتوب بسترعة
enters the pipe with a supersonic velocity, the فوم صوتية فانها ستنخف بينما تزداد االنثالبي لحتين حصتول
velocity will decrease and the enthalpy will ويالحتظ ان أقصتى قمتة. ( Ma =1) الظتروف الصتوتية أي
increase to approach sonic conditions (Ma =1). وفتي أي, لألنتروبي تحدذ عنتد بلتوا الغتاز السترعة الصتوتية
It is also clear that the maximum value of the حال متن االحتوال تتزداد قيمتة االنتروبتي وال تتنقص أبتداض ستواء
entropy occurs at the sonic velocity. In any case, . اكانت سرعة دخول الغاز فوم صوتية أو دون صوتية
the value of the entropy will always increase
regardless of the gas velocity at the inlet.
The shockwave changes occur across a very و تحتتدذ تغيتترات الموجتتات الصتتدمية عبتتر ستتم ضتتئيل يبلتتغ
small thickness of about 10-3 mm, as shown in . 6.4 كما هو مبين في الشكل10-3 mm زهاء
Fig 6.4.
(1) (2)
332
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
We can apply the momentum equation to the : و نستطي تطبيم قانون حفظ الزخم على حجم التحكم كاآلتي
control volume as follows:
Considering that the resultant force ΣFx is equal و, مستتاوي قتوت الضتغط فقتتطΣFx وعلتى أن مجمتل القتوب
to the pressure force and the flow is turbulent, : الجريان اضطرابي تصبح المعادلة
the equation will be reduced to:
(P1 – P2) A = G ( u u )
We also have
و لكن
G = ρ1 u A1 = = ρ2 u A2
Combining the two equations will give: : و بدمج المعادلتين المذكورتين نحصل على
P2- P1 = ρ1 u̅ - ρ2 u̅ (6.58)
̅ ̅
P 2- P 1 = - (6.59)
Substituting for velocity in terms of Mach : عن السرعة بداللة رقم ماخ نعو
number:
̅
Ma =
√
333
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Dividing equation (6.60) by P1 and rearranging it واعادت ترتيبها نحصل علىP1 ( على6.60) وبتقسيم المعادلة
= (6.61)
Applying equation (6.61), we can estimate the و هكذا نستطي حساب مقدار الضغط بعد حدوذ موجة صدمية
pressure resulting from a shock wave. We will واآلن نشتم معتادالت لحستاب كتل, (6.61) باستخدام المعادلة
now develop relationships to compute the : من درجة الحرارت والحجم النوعي
temperature and specific volume:
∆ + ∆H = 0
+ H1 = + H2 (6.62)
̅ ̅
+ CP T1 = + CP T2 (6.63)
However, we have:
ولكن
CP – Cv = R
CP/Cv = γ
334
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Combining the two equations will give: : و بدمج المعادلتين نحصل على
CP = (6.64)
̅ ̅
+ T1 = + T2 (6.65)
In terms of Mach number, the equation will be: : (6.65) و بداللة رقم ماخ تصبح المعادلة
Ma12 + T1 = Ma22 + T2
(6.65)
P1 v1 = R T1
P2 v2 = R T2
Substituting: : نحصل على وبالتعوي
P2 v2 = R T 2
2
Ma1 + = Ma22 +
= (6.66)
335
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Combining the ideal gas law with the mass و بدمج قانون الغازات المثالية م معادلة حفظ الكتلة التي تكتب
conversation equation which is written, for : للجريان ثابت المقطع بالصيغة
unvarying cross section- flow, as follows:
ρ1 u̅ = ρ2 u̅
u
̅
= =
u
̅
: نحصل على
We obtain:
u̅
= u̅ = (6.67)
u
̅
u
̅
= √
u
̅
u
̅
= √ (6.68)
u
̅
u̅ ( فتي المعادلتة6.68) ( متن المعادلتة ) عتن وبتالتعوي
Substituting (u̅ ) given in equation (6.68) into u
̅
: ( نحصل على6.67)
equation (6.67), we obtain:
a
=( )2 ( a )2 (6.69)
336
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Finally, we can develop an equation to compute Ma1 وأخيتترا ُ يمكننتتا التوصتتل للتتى معادلتتة لحستتاب رقتتم متتاخ
Mach number Ma1 in terms of Ma2, by ( علتى6.6. و6.66 و6.61) بتدمج المعتادالتMa2 بداللة
combining equations (6.61, 6.66, and 6.69) as : النحو اآلتي
follows:
a
= ( ) ( a )2 (6.70)
γ
Ma22 = γ (6.71)
( )
γ
By applying the above equations, we can و بهتتتذا نستتتتطي حستتتاب المتغيتتترات عبتتتر الموجتتتة باستتتتخدام
estimate the variables across the wave. المعادالت السابقة
Calculate the velocity, pressure, temperature, احسب السرعة والضغط ودرجة الحرارت عبر الموجتة وكتذل
Mach number and the specific volume across . احسب مقداري رقم ماخ و الحجم النوعي
the wave.
Solution الحل
We assume that air is an ideal gas. .ان الهواء راز مثالي نفتر
We first compute Ma1 using equation (6.13): : (6.13) من المعادلةMa1 نحسب أوالض رقم ماخ
Ma =
√
337
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Applying the following ideal gas law (P v = RT), ( ونعوP v = RT) وعلى ان الهواء راز مثالي نطبم القانون
and substituting (P v): : (P v) عن
̅
Ma =
√
̅
∴ Ma1 =
√γ
Ma1 = = 1.797
√
We then calculate Ma2 using equation (6.71): : (6.71) باستخدام المعادلةMa2 ثم نحسب
γ
Ma22 = γ
( )
γ
Ma22 = {(1.797)2 + [2/(1.4 -1)]}/ {[2 x 1.4 /(1.44 -1)] ( 1.797)2] -1}
Ma22 = 0.3809
Ma2 = 0.6172
We now compute P2 using equation (6.61) (6.61) باستخدام المعادلةP2 ثم نحسب
P2/105 =
338
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
T2/273 =
T2 = 427 K = 152 0C
The velocity u
̅ is computed by equation (6.68) (6.68) من المعادلةu
̅ و نحصل على قيمة
u
̅
u
̅
= √
600/u
̅ = (1.797/0.6172) √
u̅ = 254.8 m/s
v1 is estimated using the ideal gas law: : v1 ومن قانون الغاز المثالي نحسب
P1 v1 = R T1
v1 = 0.7963 m3/kg
339
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
v2 is determined using the continuity equation: : v2 وبتطبيم معادلة االتصال (معادلة حفظ الكتلة ) نجد قيمة
G = ρ1 A u
̅ = A u̅ /v1 = A u̅ /v2
∴ u̅ /v1 = u̅ /v2
600/0.7963 = 254.8/v2
v2 = 0.3381 m3/kg
Comment مالحظة
The value of Mach number indicates that the يالحتتظ متتن قيمتتة رقتتم متتاخ ان الجريتتان هتتو فتتوم صتتوتي ثتتم
flow is supersonic, then changed to subsonic ويمكتن. انخف للى دون صوتي بعد حدوذ الموجة الصتدمية
after the occurrence of the shock wave. The حساب مقدار الزيادت في االنتروبي أثناء حتدوذ الموجتة ابتتداءاض
increase in entropy, during the occurrence of : ( وهي6.57) بمعادلة مماثلة للمعادلة
the shock wave, can be estimated by an
equation similar to equation (6.57), which is:
S2 –S1 = CP ln - R ln (6.72)
Substituting T and P in equation (6.72) in terms ( بداللتة رقتم متاخ متن6.72) فتي المعادلتةP وT نعتو عتن
of Mach number using equations (6.69, 6.61 ) و بعتتتد الترتيتتتب نحصتتتل6.71, 6.61 , 6.6.( المعتتتادالت
and 6.71), then rearranging it, we will get: : على
( ) ( )
S2 –S1 = CP ln – CP ln (6.73)
( )
Equation (6.73) shows that the value of (S2 – S1) ( تكون موجبة حينS2 – S1) ( أن قيمة6.73) وتبين المعادلة
is positive when the value of Mach number is و بنتتاءا ُ علتتى ذل ت نستتتنتج ان,يكتتون رقتتم متتاخ أكبتتر متتن واحتتد
greater than one. Accordingly, we conclude that . الموجة الصدمية تحدذ في الجريان فوم الصوتي فقط
the shock wave only occurs in supersonic flow.
340
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
If a converging-diverging nozzle is designed واذا صتتمم المنفتتذ الملتتتم – المنفتترب بعنايتتة فتمتتدد الغتتاز فيتت
carefully, the gas expansion will approach a يصتتبح انعكاستتيا ض علتتى وج ت التقريتتب .ولهبتتوط الضتتغط الكبيتتر
reversible path. Moreover, the gas flow will be يكون جريان الغاز في سريعا ُ اذ الزمتن كافيتا ض النتقتال الحترارت
so fast that there will not be enough time for متتن المنفتتذ للتتى المحتتيط ,وعلي ت يعتتد جريان ااً ايساانتروبياً أي
heat transfer due to the high pressure drop, and بثبوت االنتروبي .
therefore the flow can be considered
isentropic.
Assuming that a perfect gas is flowing steadily واذا افترضتتنا الغتتاز ااااز ًا تام ااً يجتتري جريان تا ض مستتتقراض باتجتتاه
in one direction, this will enable us to study the واحد فيمكننتا دراستة ستلو الغتاز فتي المنفتذ لظتروف جريتان
behavior of a gas in the nozzle under different مختلفة على الوج اآلتي :
conditions as follows:
Consider the nozzle in Fig 6.5; if we control the تامل المنفذ في الشكل , 6.5فاذا تمكننا التحكم بمقدار الضتغط
pressure across the nozzle, we will arrive at the عبر المنفذ سوف نحصل على الحاالت اآلتية :
following cases:
a- No flow will take place, in the case of حتتين يتستتاوب ضااغط المحاايط P4وضتتغط الختتزان أ-
the surroundings pressure P4 is equal to P1وضغط مخرب المنفذ P3فسوف لتن يحتدذ أي
the vessel pressure P1 and to the nozzle جريتتان .ويبتتين المنحنتتى Aتوزيااع الضااغط علتتى
outlet pressure P3. Curve A depicts the امتداد المنفذ .
pressure distribution along the nozzle.
b- In the case of a decrease in the ب -حين ينخف مقدار ضغط المحيط ويبقى )(P3 = P4
surrounding pressure and keeping فستتتيندف الغتتتاز متتتن الختتتزان للتتتى ختتتارب المنفتتتذ و
(P3 = P4). The gas will exit the vessel to ينخف الضغط ليصل للتى ادنتى قيمتة فتي العنتم ثتم
the surroundings through the nozzle. يرتف في الجزء المنفرب من المنفتذ كمتا يتضتح متن
The pressure will then decrease to the المنحنى , Bويفتر في هتذه الحالتة ان السترعة لتم
minimum value, in the throat, and rise تصتتل للتتى الستترعة الصتتوتية فتتي العنتتم و لهتتذا يعتتد
in the divergent portion, as shown in الجريان في المنفذ جريانا ُ دون صوتياً .
curve B. The velocity in the throat will
not get to the sonic value; thus, the
flow is considered subsonic.
341
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
c- If the surrounding pressure is lowered (P3 = P4) اذا انخف ت ضتتغط المحتتيط أكثتتر وبقتتي-ت
further and (P3 = P4), the velocity will فالسرعة ستصل للتى السترعة الصتوتية فتي العنتم و
approach sonic velocity in the throat التتتي عرفناهتتا فتتي, تنتتتج نساابة الضااغط الحرجااة
and the critical pressure ratio will be ) كنستتتبة الضتتتغط فتتتي العنتتتم للتتتى6.41( المعادلتتتة
attained. This ratio was defined in وفي هذه الحالة يكون رقتم متاخ, الضغط في الخزان
equation (6.41) as the ratio of the توزيتC ويبتين المنحنتى. في العنم مساويا ض واحداض
pressure in the throat to that in the الضتتتغط حيتتتذ يبقتتتى الجريتتتان يتبتتت ظتتتروف ثبتتتوت
vessel. In this case, Mach number in the االنتروبي ( الجريان االيسنتروبي ) وفي هتذه الحالتة
throat is equal to one. Curve C shows يعمتتل عنتتم المنفتتذ كرااانق ولتتن يستتمح لظتتروف
the pressure distribution where the الجتتزء الملتتتم أن تستتتجيب ألي لنخفتتا الحتتم فتتي
. الضغط
prevailing flow is isentropic. In this case,
the throat acts as a choke and will not
allow a further pressure decrease in the
converging section.
d- If the surrounding pressure decreases حين يهبط ضغط المحيط أكثر تبقى الظروف صوتية-ذ
more, the conditions in the throat will بينمتتا يستتتمر, (Ma = 1) أي, فتتي عنتتم المنفتتذ
remain sonic, that is (Ma =1). The الضتتتغط باالنخفتتتا فتتتي جتتتزء المنفتتتذ المنفتتترب و
pressure, however, will continue to انظتر المنحنتى, ًيصتبح الجريتان فيت فاوق صاوتيا
decrease in the diverging portion and وفتتي هتتذه الحالتتة يببقتتى الضتتغط فتتي مختترب. D
the flow will change to supersonic; see P3 وهنتتا, P4 مستتاويا ض لضتتغط لمحتتيطP3 المنفتتذ
curve D. In this case, the pressure in the هتتو مقتتدار الضتتغط التتذي يجتتب ان يستتتخدم لغتتر
nozzle outlet P3 will be equal to the . تصميم المنفذ
surrounding pressure P4; P3 will
therefore be used to design the nozzle.
Shock wave موجة صدمية
الخزانVessel Surrounding
المحيط
(4)
P
P1 P 4 = P3 = P1
P 4 = P3
P 4 = P3
D
F
P4
x
Fig 6.5 Flow pattern in a Laval nozzle نمط الجريان في منفذ الفال6.6 الشكل
342
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
e- In the case of lowering the surrounding للتى مقتدار متابينP4 في حالة هبتوط ضتغط المحتيط-ب
pressure to an intermediate value فان الجريتانD وC مقدار ضغطي نهايتي المنحنين
between the end values of the two فتي المنفتذ ستيكون أمتا فتوم صتوتي ولكتن ال يشتمل
curves C and D, the flow through the أو ستتتحدذ موجتتة صتتدمية, مستتاحة المنفتتذ باكملهتتا
nozzle will either be supersonic, but عند نقطة متا فتي الجتزء المنفترب تستبب ارتفاعتا ض فتي
does not occupy the whole area of the ويمثتتل. الضتتغط تحتتول الجريتتان للتتى دون صتتوتي
nozzle, or a shock wave will occur in the واذا هتتتبط, حتتتدوذ الموجتتتة الصتتتدميةE المنحنتتتى
diverging portion, causing a rise in متثالض للتىC الضغط بمقدار كبير نستبة للتى المنحنتى
pressure and changing the flow to . فان الموجة ستحدذ في مخرب المنفذF النقطة
subsonic. Curve E represents the
occurrence of the shock wave. If the
pressure drops sharply relative to curve
C, for example to point F then the wave
will occur in the nozzle outlet.
f- In the case of the surrounding pressure, للتتتى دون ضتتتغطP4 حتتتين يهتتتبط ضتتتغط المحتتتيط-ح
if P4 drops below the outlet pressure P3, أي أن الغاز يجتري فتي المنفتذ, P3 مخرب المنفذ
the gas will be flowing through the فستيتمدد الغتاز ختاربP4 أكبتر متنP3 بحيذ يكتون
nozzle with P3 greater than P4. مصتحوبا ض بحتدوذP4 للتىP3 المنفذ من الضغط
However, the gas will expand to the . موجات صدمية مائلة
surrounding pressure value P4 causing
inclined shock waves.
We normally apply the equations of the نستتتتخدم المعتتتتادالت التتتتتي تختتتتتص بدراستتتتة الجريتتتتان بثبتتتتوت
isentropic flow, given in section 6.6, to solve التذي ذكرنتاه فتي الفقترت, ) االنتروبي ( الجريان االيستنتروبي
problems involving flow through nozzles. We وستنبين فتي, لحل المسائل المتعلقة بالجريان في المنفثتات6.6
will also express more relevant relationships in . المثال القادم بع المعادالت األخرب
the following example.
343
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
(1) (4)
(2) (3)
(4)
االفتراضات
Assumptions
(2) (3) (P3 = P4 = 101.3 kPa) -أ
a- (P3 = P4 = 101.3 kPa) ُ يسل الهواء سلوكا ض مثاليا-ب
b- Air is an ideal gas
We will derive some useful relationships as :المعادالت المفيدتعلى النحو اآلتي نشتم بع
follows:
G = ρ A u̅ = ρ1 A1 u̅ = C
∴ ln ρ + ln A + ln u̅ = ln C
C is a constant; differentiation will yield وباجراء عملية التفاضل نحصل على, مقدار ثابتC حيذ ان
̅
u
+ + =0 (6.74)
̅
u
344
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Applying the ideal gas law in terms of density: : من معادلة الغاز المثالي بداللة الكثافة
Pv=RT
P=ρRT
P=ρRT
= + (6.75)
We also have the relationship for the reversible كتتتذل لتتتدينا قتتتانون العمليتتتة االديبادتيتتتة االنعكاستتتية ( ثبتتتوت
adiabatic process (constant entropy process): ) االنتروبي
P vγ = C
P/ργ = C
∴ –γ =0 (6.76)
Using the equation defining Mach number ومن معادلة تعريف رقم ماخ
̅
Ma = (Eqn 6.13)
√
̅
Ma =
√
̅
= - (6.77)
̅
345
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
dH = CP dT (Eqn 4.33)
∴ CP dT + u̅ du̅ = 0
CP = R (Eqn. 6.64)
∴ R dT + u̅ du̅ = 0
̅
R = (from Eqn. 6.13)
̅
dT + u̅ du̅ = 0
d ̅
∴ + =0 (6.78)
( ) ̅
̅
∴ and 6.78) gives + =0 (6.78)
Combining equations (6.75, 6.77 ( ) ̅ ( نحصل على المعادالت6.76 ,6.77 , 75.) ومن المعادالت
the following relationships: : االتية
(γ ) a
= γ (6.79)
+ a
346
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
̅du
= )(6.80
̅
u
d
= )(6.81
dρ
= )(6.82
ρ
Equations (6.79 - 6.83) can be integrated for any يمكتتتن مكاملتتتة المعتتتادالت ( )6.63 -6.7.ألي مقطعتتتين فتتتي
two sections of the nozzle, and to estimate the المنفذ .ولحساب مساحة عنم المنفتذ نكامتل المعادلتة )(6.83
throat area, we integrate equation (6.83) over في المقطعين ( )2و ( , )3ولما كان الجريان في مخرب المنفذ
the two sections (2) and (3). Since the flow in فتتتوم صتتتوتي لتتتذا فتتتان الجريتتتان فتتتي العنتتتم اليمكتتتن ان يفتتتوم
the outlet of the nozzle is supersonic, the flow الجريتتتتان الصتتتتوتي ,أي ان رقتتتتم متتتتاخ فتتتتي العنتتتتم يستتتتاوي
in the throat will never exceed the sonic value, الواحد ). (Ma =1
and Mach number will therefore be Ma= 1.
( )
= ( ) )(6.84
( )
347
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
=( )2
Substituting γ, Ma3 and d3 we obtain: : نحصل علىd3 وMa3 وγ عن وبالتعوي
( )( )
= ( )( )
( )
d2 = 0.975 cm
We then calculate the pressure in the throat by (6.40) ثتم نحستب مقتدار الضتغط فتي العنتم بتطبيتم المعادلتة
applying equation (6.40) to the vessel and the . على الخزان و مخرب المنفذ
nozzle outlet.
( )
= [( Ma22 + 1]γ (γ-1) (Eqn 6.40)
1.4/(1.4 – 1)
P1 = 101.3 x 103 ( x 32 + 1 )
P1 = 3680 kPa
P1 v1/T1 = P3 v3/T3
P1 v1γ = P3 v3γ
: و بدمج المعادلتين نحصل على
Combining the two equations:
= ( )(γ – 1)/γ
348
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
T3 = 27 + 273 = 300 K
=( )(1.4 – 1)/1.4
T1 = 835.2 K
We will now estimate the flow rate G; the : لدينا معادلة االتصال,G واآلن نحسب معدل الجريان
continuity equation is:
G = ρ A u̅ = A u̅/v
P v = RT
̅ ̅
Ma = =
√ √
∴G= Ma √γ
G = P A Ma √γ (6.86)
γ
G = P3 A3 Ma3√
G = 0.388 kg/s
349
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
The flow pattern of two phase flow depends on يعتمتد نمتط الجريتان ثنتائيي الطتتور علتى سترعة جريتان الطتتور
the velocity of the gaseous phase. Many وقتتد اجريتتت تجتتارب عديتتدت لمشتتاهدت انتتواع الجريتتان, الغتتازي
experiments have been conducted to observe . 6.6 الموضحة في الشكل
the types of flow shown in Fig 6.6.
Wavy Bubble
flow flow
Slug Plug
Spray
flow flow
flow
Annular
Stratified
flow
flow
Fig 6.6 Flow modes of a gas-liquid mixture in a أنواع جريان خليط من الغاز والسائل في6.6 الشكل
horizontal pipe انبوب أفقي
350
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Bubble flow arises when the ratio of the liquid يحتتدذ الجريااان الفقاااةي حتتين تكتتون نستتبة جريتتان الستتائل للتتى
to gas GG is high and the bubbles move at a وتسير الفقاعتات بسترعة مقاربتة لسترعة, عاليةGG الغاز
velocity closer to that of the liquid. If the وفي حالة تضخم حجم الفقاعات أو التصام بعضها م. السائل
bubbles grow in size or merge forming larger وبازديتتاد جريتتان, بع ت ينتتتج متتا يستتمى الجريااان االنساادادي
bubbles, plug flow will result. As the flow of gas الغاز نسبة للى السائل ينتتج الجرياان التراصافي حيتذ يظهتر
increases relative to the liquid, stratified flow وعنتتد ستترعة أعلتتى. الغتتاز بطبقتتة محتتددت فتتوم طبقتتة الستتائل
prevails; the gas will appear as a distinct layer يتحول الجريان للى الجريان المتماو التذي يظهتر فيت ستطح
above the liquid. At a higher velocity, the flow ثتم تنمتو االمتواب بازديتاد سترعة. متموب يفصل بتين الطتورين
الغاز فيحصل الجريان المتالطم حيذ تستير كتتل متن الستائل
will change to the wavy flow regime, where a
بستتترعة أعلتتتى متتتن متوستتتط ستتترعة الستتتائل التتتتي قتتتد تستتتبب
wavy-surface is formed separating the two
اهتزازات عنيفتة وخطترت فتي االنبتوب اذا متا اصتطدمت بحنيتة
phases. Increasing the gas velocity further will
وبعتد ذلت ينتتج الجريااان الحلقاي وهتو رشتتاء متن الستتائل. فيت
cause the waves to grow and develop slug flow.
يتكون بمحاذات جتدران االنبتوب يجتري فتي داخلت رتاز بسترعة
In this regime, some of the liquid mass will وفتي حالتة كتون سترعة. عالية حامال مع قطترات متن الستائل
travel at a speed higher than the average الغاز عالية جتداض فستوف يتتوزع الستائل علتى شتكل قطترات فتي
velocity of the liquid causing vibrations. These . الغاز مكونا ض مايسمى بالجريان الرذاذي
vibrations can be dangerous and damaging if
they hit a bend along the pipeline. The flow will
then change to the annular flow mode, where
UL,∞ (m/s)
the gas carrying drops of liquid travel at high
speed inside a membrane formed close to the
pipe wall. At very high gas speed, the liquid will
break down into drops spreading throughout
the gas and creating what is known to be Spray
flow.
UG,∞ (m/s)
Fig 6.7 Types of two phase flow انواع الجريان ثنائي الطور6.6 الشكل
Fig 6.7 shows the boundary lines for the types و يشتير, حدود انواع الجريتان ثنتائي الطتور6.7 ويبين الشكل
of two phase flow. The letter G refers to the gas و قتد تتم. ستائالضL للى الغتاز بينمتا يعنتي الحترفG الحرف
and L to the liquid. The diagram was based on رسم الشتكل علتى استاس معلومتات مختبريتة تختص خليطتا ض متن
experimental data for a mixture of water and ويالحظ سم الخطوط ريتر االعتيتادي مشتيراض. الماء والهواء
Air. The thick lines indicate that the flow areas . للى عدم امكانية تحديد مناطم الجريان المختلفة بدقة عالية
couldn’t be defined accurately.
351
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Where uL,∞ represents the velocity of the liquid ستترعة الطتتور الستتائل المعرفتتة علتتىuL,∞ حيتتذ يمثتتل الرمتتز
phase based on (uL,∞ = 4QL/πd2), implying that ( اي وكتتان الستتائل يشتتغل مقط تuL,∞ = 4QL/πd2) استتاس
the liquid occupies the whole cross section هتتتي ستتترعة الغتتتاز المعرفتتتة علتتتىuG,∞ االنبتتتوب باكملتتت وان
area. The velocity uG,∞ refers to the gas phase ( uG,∞ = 4QG/πd2) اساس
based on (uG,∞ = 4QG/πd2)
GT = GG + GL (6.87)
If d denotes the internal diameter of the pipe وكتانA ومساحة مقطعتd واذا كان قطر االنبوب الداخلي
and A the cross section area, whilst wG is the gas : يمثل نسبة كتلة الغاز في الخليط أي أنwG الرمز
to liquid mass ration in the mixture, we will
obtain:
wG = (6.88)
GL = GT (1 –wG) (6.89)
352
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
We can now define the average velocity of the : كاآلتيuL والسائلuG يمكننا اآلن تعريف متوسط سرعة الغاز
gas uG and the liquid uL as follows:
uG =
uG = (6.90)
( )
uL = (6.91)
ρG and ρL denote the densities of the gas and . هما كثافة الغاز والسائل على التواليρ وρ حيذ
liquid respectively.
We can estimate the pressure drop for the ( نستتتطي حستتاب هبتتوط الضتتغط5.8) و علتتى استتاس المعادلتتة
liquid phase using equation (5.8) assuming that بسبب االحتكا الناجم عن جريان الطتور الستائل بتافترا انت
it is flowing in the pipe without the other phase. . يجري في االنبوب دون الطور اآلخر
- ∆PL = 4f ( ) ρL (6.92)
Substituting uL using equation (6.91) into (6.92) ( في المعادلة6.91) من المعادلةuL وبالتعوي عن
equation (6.92) gives: : نحصل على
353
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Lockhart and Martinelli assumed that the total - ∆PT وقد افتر لوكهارت ومتارتينيلي هبتوط الضتغط الكلتي
pressure drop - ∆PT is equal to a drop for one of مساويا ُ هبوط ضتغط احتد الطتورين مضتروبا ض بمعامتل تصتحيح
the phases multiplied by a correction factor Φ2, : أي أنΦ2
thus;
The values of Φ are given in table 6.1 for حيذXT لقيم مختلفة من6.1 مدرجة في الجدولΦ وان قيم
different values of XT, defined as follows:
Now we can calculate the pressure drop (-∆PT) ( بستبب االحتكتا-∆PT) وهكذا نستطي حساب هبوط الضتغط
due to friction for the flow of a mixture of gas : اثناء جريان خليط من الغاز والسائل في انبوب كاآلتي
and liquid in a pipe as follows:
We first compute the Reynolds number for the : نحسب اوال ُ رقم رينولدز للسائل
liquid phase:
ReL =
( )
ReL = (6.96)
354
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
XT Φ
0.01 128
0.02 68.4
0.04 38.5
0.07 24.4
0.10 18.5
0.20 11.2
0.40 7.05
0.70 5.05
1.00 4.20
2.00 3.10
4.00 2.38
7.00 1.96
10.1 1.75
20.0 1.48
40.0 1.29
70.0 1.17
100.0 1.11
Using the value of Reynolds number and the بعتد معرفتة رقتم رينولتدز5.7 متن الشتكلf ثم نستتخرب قيمتة
relative roughness e/d we find the value of f . (e/d) و الخشونة النسبية
from Fig 5.7.
6.6 مثال
Example 6.7
A mixture of gas and liquid is running in a يجري خليط من الغاز والسائل في انبوب املتس قطتره التداخلي
smooth pipe of an internal diameter 0.02 m. If احستتب هبتتوط. 0.2 kg/s بمعتتدل جريتتان مستتتقر0.02 m
the steady flow rate is 0.2 kg/s, calculate the الضتتغط لكتتل متتتر متتن االنبتتوب علمتا ض بتتان نستتبة كتلتتة الغتتاز فتتي
pressure drop for each meter length of the : وأن خواص الغاز و السائل هي0.149 الخليط هي
pipe. Given that the mass gas ratio in the
mixture is 0.149 and the gas and liquid
properties are:
ρG = 60 kg/m3
μG = 1.0 x 10-5 Ns/m2
ρL = 103 kg/m3
μG = 2.0 x 10-3 Ns/m2
355
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Solution الحل
We assume that the pipe is smooth. . ان االنبوب املس نفتر
To apply equation 6.95, we first estimate f from 5.7 من الشكلf بعد ان نوجد قيمة, (6.95) نستخدم المعادلة
Fig 5.7
ReL will be determined using equation (6.96), : ( وهي6.96) من المعادلةReL نحسب قيمة
which is:
( )
ReL =
( )
ReL = = 5417
( )
The friction factor for a smooth pipe is found نجتتتد أن قيمتتتة معامتتتل االحتكتتتا لألنبتتتوب5.7 ومتتتن الشتتتكل
from Fig 5.7, it is: : االملس هي
f = 0.009 approximately
Φ = 3.106
Φ2 = 9.647
356
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
Substituting in equation (6.95) (6.95) في المعادلة ان نعو واآلن نستطي
357
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
L m l طول االنبوب
Pipe length
2 -2
LT J/kg Lf خسائر االحتكا
Friction losses
Molecular weight M الوزن الجزيئي
-- Kg/kmol
P الضغط
Pressure ML-1T-2 Pa (N/m2)
الضغط في الظروف الحرجة
Critical pressure ML-1T-2 Pa P*
Pressure drop due to friction ML-1T-2 Pa -∆P هبوط الضغط بسبب االحتكا
358
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
359
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
6.1 A gas is flowing at a constant temperature, 5 km و طولت0.25 m يندف رتاز فتي انبتوب قطتره6.6
in a pipe of 0.25 m diameter with a 5 km length فتاذا كانتت, و بثبتوت درجتة الحترارت0.217 kg/s بمعتدل
at a rate of 0.217 kg/s. The viscosity of the gas is وكثافت ثابتة المقدار خالل1.4 x 10-5 Nm/s2 لزوجة الغاز
1.4 x 10-5 and the density, considered constant, احسب الضغط الالزم لدف الغاز0.56 kg/s الجريان مساوية
is equal to 0.56 kg/s. Calculate the pressure في االنبوب بحيذ ينبعذ الغاز في نهايتة االنبتوب االخترب للتى
required to drive the gas through the pipe to ( ثتم اثبتت امكتان101.3 kPa) المحتيط تحتت الضتغط الجتوي
the surrounding at atmospheric pressure . اهمال الطاقة الحركية
(101.3 kPa). Show that the amount of kinetic
(e/d = 0.002) الخشونة النسبية
energy is negligible. (e/d = 0.002)
Ans ب
111 kPa
6.2 An ideal gas, following the relationship ( يجتري فتيP v = 75 m2/s2) راز مثالي يتب العالقة6.2
(P v = 75 m2/s2), flows in a horizontal pipe at a فتتاذا كتتان, انبتتوب افقتتي جريانتا ض مستتتقرا بثبتتوت درجتتة الحتترارت
constant temperature. The internal diameter of ومقتتدار هبتتوط الضتتغط0.025 m قطتتر االنبتتوب التتداخلي
the pipe is 0.025 m and the pressure drop is 11 احسب معدل الجريان, من طول االنبوب5 m لكل11 kPa
kPa for each 5m length. Calculate the mass flow مفترضتا ض ان معامتلkg/sm2 الكتلي لوحده المساحة بوحتدات
rate per unit area in kg/sm2, assuming the . 12 kPa ( والضغط في نهاية االنبوبf = 0.009) االحتكا
pressure at the end of the pipe is 12 kpa and . اهمل الطاقة الحركية
the friction factor f = 0.009. Ignore the kinetic
energy.
6.3 A pipe with a diameter of 50 mm and a ينقتتل رتتاز500 m وطول ت50 mm انبتتوب قطتتره6.6
length of 500 m, transports hydrogen فتاذا كتان ضتغط. الهيدروجين بدرجة حترارت التتي تبقتى ثابتتة
isothermally. If the pressure of the feed vessel والضتتغط فتتي نهايتتة االنبتتوب2.6 MPa الختتزان المغتتذي
is 2.6 MPa and at the end of the pipe is 2 MPa, احستتب معتتدل جريتتان الهيتتدروجين مهم تالض الطاقتتة, 2 MPa
determine the flow rate of the hydrogen. Ignore . الحركية
the kinetic energy.
360
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
(To find f, apply the trial and error method) ) f (استخدم طريقة التجربة والخطا اليجاد معامل االحتكا
Ans ب
0.213 kg/s
6.4 Air is flowing from a vessel at a rate of 2000 متتن ختتزان تحتتت2000 kg/m2s ينتقتتل هتتواء بستترعة6.4
kg/m2s from one vessel to another. The . للى ختزان تختر290 K وبدرحة حرارت12 MPa ضغط
pressure in the feed vessel is 12 MPa and the فاذا كان االنبوب الواصل بين الخزانين معزوالض حراريتا ض و كتان
temperature is 290 K. The connecting pipe is احستب مقتدار الضتغط فتي. 35 m وطولت10 mm قطتره
10 mm in diameter and 35 m long; it is : الخزان الثاني علما ض أن
thermally insulated. Estimate the pressure in
the receiving tank, given:
361
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
6.5 A water-steam mixture flows in a 75 mm يجري خليط متن المتاء و بختار المتاء فتي انبتوب معتزول6.5
internal diameter and 100 m long insulated فتاذا كتان معتدل, 75 mm وقطتره التداخلي100 m طول
pipe. If the flow rate of the water is 1.5 kg/s and 0.05 kg/s ومعتدل جريتان البختار1.5 kg/s جريتان المتاء
that of the steam is 0.05 kg/s, estimate the : احسب مقدار هبوط الضغط لجريان الخليط علما ض أن
pressure drop for the mixture, given:
Ans ب
29 kPa
6.6 Air is discharged from a vessel though an ودرجتتتة10 bar يتتتتدفم الهتتتواء متتتن ختتتزان ضتتتغط6.6
opening 12 mm in diameter, to the فتاذا كتتان12 mm ختتالل فوهتتة قطرهتتا300 K حرارتت
surroundings at 1.0 bar. If the pressure inside احسب معدل الجريان الكتلتي علمتا ض1.0 bar ضغط المحيط
the vessel is 10 bar and the temperature is : ان
300 K, calculate the mass flow rate, given:
(Note that the flow through the opening will not اليمكتتن للجريتتان ختتالل الفوهتتة ان يفتتوم الجريتتان: (مالحظتتة
exceed the sonic condition) )الصوتي
362
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
6.7 Show that the maximum flow rate of air اثبتتت ان اقصتتى معتتدل لجريتتان الهتتواء فتتي منفتتذ ملتتتم6.6
passing through a convergent-divergent nozzle : منفرب هو
is given by:
Gmax =
√
6.8 Integrate equations 6.79, 6.80, 6.81 and بتتتتتين6.62 , 6.61 , 6.6. , 6.7. كامتتتتتل المعتتتتتادالت6.8
6.82 for two sections of a convergent-divergent . مقطعين مختلفين لمنفذ ملتم منفرب
nozzle.
6.9 A convergent-divergent nozzle is fixed on منفذ ملتم – منفرب مثبت في احد جوانتب ختزان يحتتوي6.6
the side of a vessel containing air at 10 bar abs ولقتد, 80 0C ودرجتة حترارت10 bar هواء بضتغط مطلتم
and 80 0C. The discharged air exerts a force of وجتتد ان الهتتواء المتتتدفم متتن المنفتتذ يستتلط قتتوت علتتى الختتزان
11.1 kN on the vessel. If the absolute pressure فاذا كتان الضتغط المطلتم فتي نقطتة, 11.12 kN مقدارها
at the outlet is 1 bar , compute: : أحسب1 bar خروب الهواء
Ans ب
a- 2.156
b- 170.88 cm2 , 88.6 cm2
6.10 6.66
a - Starting with the energy equation, develop ابتتتداء متتن معادلتتة الطاقتتة جتتد عالقتتة لحستتاب الستترعة دون-أ
a relationship for estimating the subsonic . الصوتية لتدفم راز من خزان خالل منفذ ملتم
velocity of a gas being discharged from a vessel
through a convergent nozzle.
363
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
b - Air is discharged from a large vessel, at يتتتتدفم الهتتتواء متتتن ختتتزان كبيتتتر الحجتتتم تتتتدفقا ض بثبتتتوت- ب
constant entropy, through a nozzle, 12 cm in فتتاذا علمتتت ان12 cm االنتروبتتي ختتالل منفتتذ قطتتر فوهتت
diameter. If the temperature inside the vessel is و45 kPa وضتتغط المطلتتم450C درجتتة حتترارت الختتزان
450C and the pressure is 45 kPa abs., calculate احستب معتدل الجريتان و. ضغط المحيط هو الضغط الجتوي
the flow rate and the temperature in the nozzle درجة الحرارت في فوهة المنفذ
outlet. Consider the pressure of the
surrounding to be the atmospheric pressure.
Comment: in case of not attaining the critical في حالة عدم بلوا الهواء نسبة الضغط الحرجة فان: مالحظة
pressure ratio by the air in the outlet, the الضغط في الفوهة يساوي ضغط المحتيط ويبقتى الجريتان دون
pressure in the outlet is equal to the . صوتيا
surrounding pressure and the flow will remain
subsonic.
6.11.1 Use Excel to solve problem 6.3 6.3 استخدم برنامج االكسل لحل المسالة6.66.6
6.11.2 Write and an essay about the اكتب عن منظومة الهتواء المضتوط واستتخداماتها فتي6.11.2
compressed air system and its uses in industry المصان
6.11.3 If you are asked to design a pipeline to اذا طلتتب من ت تصتتميم انبتتوب لنقتتل رتتاز الميثتتان متتن6.66.6
transport methane from a compressor station فمتتا هتتي, كيلتتومتر1. محطتتة الضتتغط التتى مجمت ستتكني يبعتتد
to a residential area, 10 km away, what will be المعلومتتات المطلوبتتة لحستتاب حجتتم االنبتتوب ؟ استتتخدم برنتتامج
the information required to estimate the pipe اكسل للحسابات معتمدا على معدل جريان يحدده المدرس
diameter? Use Excel to compute the size of the
pipeline for a value of flow rate provided by
your teacher
6.11.4 Compare a piping system to transport قارن بين منظومتة انابيتب لنقتل وتوزيت ميتاه الشترب6.66.6
and distribute drinking water to that of propane ومنظومة نقل وتوزي راز البروبان مبينا بالرستومات الهندستية
الصمامات واجهزت الض
gas. Produce engineering drawings to show the
valves and pumping equipment
364
GAS FLOW IN PIPES 6 جريان الغازات في االنابيب
6.11.5 The use of nozzles in aircraft engines and استخدام المنفثات في محركات الطائرات وفي اجهتزت6.66.6
in air-conditioning equipment التكيف
6.11.6 Write about the phenomenon of the two اكتتتب عتتن ظتتاهرت حتتدوذ الجريتتان ثنتتائي الطتتور فتتي6.66.6
phase flow in the petroleum industry الصناعات النفطية
365
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
366
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
7.2 Measurement of velocity by 1.7قياس سرعة الجريان بواسطة أنبوب بيتوت
Pitot- Tube تررفلف أنب ر ب ت ر مررن انب بررة ر ا ررة تشرركل نها تهررا را ررة
ض ر انب ر ب ت ر فرري قائمررة كمررا مب ر ن فرري الشرركل 1.1
A Pitot tube consists of a hollow-right angled م رررى السررائل بح ررك تر ن فتحررة نها ترره نحر االت ررا المعرراكس
tube positioned so that the open end is opposes لل ر ررران ,عتمرررد ارتفرررائ السرررائل ف ررره بلررر مقررردار سرررربة
the liquid flow direction, see Fig 7.1. The liquid قر س السرربة فري ال ر ان .ت در مالحمرة ان انبر ب تر
rises in the tube depending on the velocity at نققة تماسه م المائ فقق .
that point.
Pitot tube بت انب
h1
G
)(1 )(2
367
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
If a piezometric tube is fixed at the pipe wall, اذا ثب ر انبوووب بيزومتوور فرري رردران االنب ر فرران ارتفررائ
the height of the liquid column will provide the السررائل ف رره س ر عقي مقرردار الض و ط السووكوني للمررائ لالضرريق
value of the static pressure. Applying Bernoulli’s )2) ل1االستات كي) بتقب ع معادلرة برنر لي فري النققتر ن ل
equation at points (1) and (2), we obtain: : نحصل بل
+ + z1 = + + z2 (7.1)
The fluid at point (2) is stagnant, thus: : ) ك ن في حالة السك ن أي أن2لكن المائ في النققة ل
u2 = 0
z1 = z2
Therefore equation (7.1) will be reduced to: : ( إل7.1) لذا تختصر المعادلة
+ = (7.2)
The pressure P1 is the static pressure in the الضيق السك ني ل الضيق االستات كي ) فيP1 مثل الضيق
pipe. It is equivalent to the static pressure head الذي قرأ فيh1 ه كافئ عمود الض ط السكوني. األنب
h1 which is read from the peizometeric tube. At مثرلh2 ) فاالرتفرائ2 امرا فري النققرة ل, االنبر البر مترري
point (2), the height h2 is the total static head م مرر ئ بمرر د الضرريق السررك ني العمووود المكووافط لةطاقووة
and the kinetic head. The kinetic energy at (2) is ) إلر2 اذ ان القاقررة الحرك ررة تح لر فري النققررة ل, الحركيووة
converted to an extra head. . بم د اضافي من السائل
P2 is called the impact pressure. Since بما ان . الض ط الصدميP2 سم
P=ρgh
اذن
thus
h1 + = h2
h2 – h2 =
368
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
We can therefore compute the velocity by: : هكذا نحس السربة من
u1 = √ (7.3)
Equation (7.3) provides theoretical velocity أمرا فري التقب رع ف ر, , ( السرربة نمر را7.3) تعقي المعادلة
values; to get realistic values, we introduce the : فتصبح المعادلةCv ادخال معامل الق اس
instrument coefficient Cv and the equation will
change to:
u1 = Cv √ = Cv √ (7.4)
For most of the measurements, Cv = 1 or close في معمم حاال الق اسا ا مقاربة, تسا ي احداCv ان ق مة
to 1. Equation (7.3) shows how to calculate the ( قر قرة حسرا السرربة7.3) كما ت ضح المعادلرة. ,له دا
velocity from knowing the liquid heights h1 and مكننررا ت ص ر ل, h2 h1 مررن معرفررة ارتفررابي السررائل
h2. The pressure difference can be read directly االنبر الب ر مترري موانومتر لقرراء ذرابي انب ب ت
by joining the ends of the Pitot tube and the ت در االشرار هنرا إلر أن السرائل فري. فرع الضيق مباشر
piezometric tube to a manometer. In this اما اذا كان مختلفا كمرا هر, المان متر ه نفس السائل ال اري
arrangement, the liquid flowing in the pipe will من,( بدال7.4) ف ستحسن استخدام المعادلة1.2 مب ن في الشكل
rise into the manometer arms. However, if the (1.3)
manometer liquid is not the same as the
flowing liquid, equation (7.4) should be applied
instead of (7.3). Manometer مان متر
Fig 7.2 Pitot Tube attached to a manometer متصل بمان متر بت انب1.7 الشكل
369
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
A Pitot-static tube can also be used to replace كذلو مكن اسرتعمال انبووب بيتووت – سوتاتيك الرذي عر ص
the arrangement of Fig 7.2. It consists of two هر ترفلف مررن انبر ب ن, 1.2 برن الترت ر المبر ن فري الشرركل
concentric tubes; the inner one measures the اذ ق س االنب الرداخلي منهمرا الضريق الصردمي, متمركر ن
impact pressure whilst the outer tube gives the ب نمررا عقرري االنبرر الخررار ي الضرريق السررك ني مررن خررالل
static pressure through the holes at the end. . 1.3 انمر الشكل. الثق في نها ته
See Fig 7.3
The inner and outer tubes are normally باد تصل االنب بان الداخلي الخار ي بمان متر لق اس فرع
attached to a manometer to read the pressure مكرررن ف مرررا خرررص الم ائررر االنضرررياق ة اسرررتخدام, الضررريق
difference directly. For compressible fluids, ( لحسررا السررربة د ن الصر ت ة الترري ال تر ررد7.3) المعادلررة
equation (7.3) can be applied to determine the ب نما نقبرع معادلرة القاقرة بعرد تبسر قها لق راس60 m/s بل
subsonic velocity up to 60 m/s. However, to . 60 m/s السرئ د ن الص ت ة التي تف ع
compute the subsonic velocity for values above
60 m/s, a simplified version of the energy
equation is used.
= +∫
Assuming isentropic flow, we can integrate the ) بثبر االنتر بري ل ا سرنتر بي, اذا افترضنا ال ر ان ر انا
above equation using (P vϒ = C) and (u2 = 0) (u2 = 0) ( علP vϒ = C) نستق مكاملة المعادلة باستخدام
370
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
(ϒ-1)/ϒ
= P1 v1 [( ) – 1] (7.5)
It is obvious that the calculation of the velocity من ال اضح ان حسا السرربة فري هرذ الحراال عتمرد بلر
in such cases depends on the type of امررا فرري حالررة اسررتعمال انب ر. العالقررة ب ر ن الضرريق الح ررم
relationship between the pressure and the ستات و لق اس السرئ فر ع الصر ت ة فتصربح التحلر ال- ب ت
volume. However, for supersonic velocities لرذا ستحسرن الر ر ئ, لحد ك الم را الصردم ة,اكثر تعق دا
measured by a Pitot-static tube, the analysis .إل الكت المتخصصة بعلم داينميك ال ازات
gets complicated due to the occurrence of
shock waves; it is therefore recommended to
refer to the Gas Dynamics texts for such cases.
الحل
Solution
: المعل م
Given:
u1 = Cv √
371
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
We evaluate the pressure difference using the ( الترري تخرررص3.10) نحسرر فرررع الضرريق مررن المعادلررة
manometer relationship, equation (3.10): : المان مترا
= 14997.528 Pa
u=√
u = 5.905 m/s
The orifice meter consist of a flat plate with a تررفلف المق رراس الف ر هي مررن صررف حة مثق بررة تعترررص م رررى
sharp-edged hole placed concentrically inside a 1.4 كما ه مب ن في الشكل, المائ في انب ما
pipe, as shown in Fig 7.4
Orifice plate الص حة المثق بة
∆h Mercury رئبع
372
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
The orifice is machined carefully to provide a حردد ققرهرا. تصن ف هة الثق بح ك تك ن حافتهرا حراد
sharp-edged hole. The diameter of the plate is بم ر الق اسررا العالم ررة المتفررع بل هررا قرراس فرررع الضرريق
specified according to international standards. نقبررع مررر ثان ررة معادلررة. ببررر الصررف حة ب اسررقة المرران متر
The pressure difference across the plate is : القاقة لتخم ن معدل ال ر ان
measured by a manometer. To determine the
flow rate, we apply the energy equation:
∫ = v (P2 – P1)
∫ ∫
The energy equation can be simplified by
assuming: : اذ أن, مكن تبس ق معادلة القاقة
z1 = z2
∫ ∫ ∫ +
Ws = 0
Lf = 0
373
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
G1 = G2
u1 A1 ρ1 = u2 A2 ρ2
ρ1 = ρ2
Thus: : لذا
u1 = u2 (A2/A1)
– (1 - ) = v (P1 – P2)
u2 = (7.7)
√
However: : لكن
G = u2 A2 ρ2 = u2 A2/v2
374
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Therefore اذن
G= (7.8)
√
It can be noted that the flow cross section area في المقق A1 الحم ان مساحة مقق ال ر ان تنقص من
is reduced from A1 in section (1) to the orifice فري المقطوع اققةوA2 ثرم إلرA0 ) إل مساحة الف هة1ل
area A0 and then to A2 in the vena contracta. بل ر اسرراس مسرراحةCc عرررف معامررل الررتقلص. لل ر رران
The contraction coefficient Cc is defined in : المقق األقلص مساحة الف هة كاآلتي
terms of the area of the orifice and vena
contracta as follows:
Cc = A2/A0 (7.9)
G= (7.10)
√
The specific volume v is considered constant v نمرررأ لكر ن المررائ ض ررر انضررياقي لررذا بررد الح ررم الن ر بي
because the fluid is incompressible. Now, بررالتع ص بررن تررفث ر خسررائر االحتكرراو فرري المق رراس. ثابتررا
substituting the discharge coefficient CD for مكرنCD بمعامل التصوريفα2 α1 Cc معامل التقلص
friction losses in the meter, and for the : ( بالص ية7.10) ان نكت المعادلة
coefficient of contraction Cc including α1 and α2,
we can write equation (7.10) in the following
format:
G= (7.11)
√
375
G=
√
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
If we consider the orifice area A0 small, صرري ر نسرربة إل ر مسرراحةA0 اذا ابتبرنررا مسرراحة الف هررة
compared to the area of the pipe A1, the : صبح المقدارA1 االنب
following expression becomes:
[ ]1/2 1
G= √ (7.12)
: أ بداللة الكثافة
In terms of density:
G = CD A0 ρ √ (7.13)
In terms of the liquid head which is equivalent : (P1 – P2) ∆ المكافي لفرع الضيقh ا بداللة عمود السائل
to the pressure difference (p1 –P2):
G = CD A0 ρ √ (7.14)
Comparing equation (7.13) to (7.4) we note that ( نالحم ان معامل7.4) ( م المعادلة7.13) بمقارنة المعادلة
the coefficient of discharge is equal to the ratio التصر ف ه في ال اق نسبة التصر ف الحق قي إل التصر ف
376
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
of the actual discharge to the calculated value . بل اساس السربة مضر بة في المساحة المحس
based on area and velocity.
The magnitude of the discharge coefficient تعتمررد ق مررة معامررل التصررر ف بلر مقرردار رقررم ر ن لرردر فرري
depends on the Reynolds number; for values تخررذ معامررل104 فرراذا كرران رقررم ر ن لرردر اكبررر مررن, الف هررة
greater than 104 the coefficient will be . ه التقر بل0.61 إل, التصر ف مسا ا
considered equal to 0.61 approximately.
For the gas flow in a pipe, we can apply فرري حالررة ق رراس ر رران اليررار فرري االنب ر ف مكننررا اسررتخدام
equation (7.13) by assuming the gas to be an ض رررر, ذلرررو اذا افترضرررنا اليرررار مائعرررا (7.13) المعادلرررة
incompressible fluid. However, for compressible , ,
امررا فرري حالررة كر ن اليررار مائعرا انضررياق ا فرراالمر. انضررياقي
flow we need to integrate the ∫ فرري معادلررة القاقررة حسرر تقلرر مكاملررة المقرردار
expression ∫ in the energy equation. The العالقررة ب ر ن الضرريق الح ررم الترري بررد رها تعتمررد بل ر ن ر ئ
integration is performed according to the . بمل ة االنضياق
relation between the pressure and volume
which depends on the type of compression.
Fig 7.5
1.7 الشكل
377
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Equation (7.11) is used to evaluate the flow rate ( لتخمر ن معرردل ال ر رران اذ نعر ص1.11) تسرتخدم المعادلررة
where the throat area A2 is substituted for A0. A2 بمساحة العنعA0 بن
G= √
378
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
G = CD ρ √ (7.15)
√
G = CD ρ √ (7.16)
√
The value of the discharge coefficient for a تكر ن2... 2..0 تترا ر ق مرة معامرل التصرر ف بر ن
Venturi meter is 0.98-0.99. The cost of برراد كلفررة تصررن مق رراس فنتشرر ري بال ررة مقارنررة بالمق رراس
manufacturing the meter is usually much higher تسرتخدم لحسرا1.15 ت در المالحمة بان المعادلة. الف هي
than that for the orifice meter. It is also worth فررذا كرران, معرردل ال ر رران بيررص النمررر بررن ضرر المق رراس
noting that equation (7.15) is used to calculate سررتعقي قررراء المرران متر فرررع,المق رراس فرري ض ر مائررل قل ر ال
the flow rate regardless of the positioning of . ) بما ف ه فرع االرتفائ2) ل1الضيق الكلي ب ن النققت ن ل
the meter. The manometer will read the
pressure difference, including the effect of the
liquid column, between the points (1) and (2)
even if the manometer is in an inclined position.
Water is flowing in a vertical pipe; a Venturi فرراذا اسررتخدم انب ر, , ررري المرراء فرري انب ر مثب ر شرراق ل ا
meter, with an inlet diameter of 0.25 m and 0.125 m ققررر بنقرره0.25 m فنش ر ري ققررر مدخلرره
throat diameter of 0.125 m, is used to measure 0.25 m لق اس معدل ال ر ان كان قراء المران متر الرئبقري
the flow rate. If the manometer reading is مسررا ةCD ق مرة, احسر معردل ال ر ران الح مري رابال,
0.25 m, compute the volumetric flow rate. Take كثافررة المرراء13600 kg/m3 كثافررة الرئبررع2..0
the value of CD equal to 0.98, the density of . 103 kg/m3
mercury 13600 kg/m3 and the density of water
103 kg/m3.
الحل
Solution
: المعل م
Given:
379
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
G = CD ρ √
√
We first estimate (P2 – P1) using equation (7.10) (P1 – P2) ) ن د ق مة7.10) من المعادلة
= 30901.5 Pa
Q = G/ρ = 2..0 √
√
Q = 0.098 m3/s
Exercise تمرين
Repeat the solution of the above example ابد حل المثال ابال معتبرأ السرائل ال راري فري االنبر نفقرف
considering the liquid to be oil with a specific اسرررتخدم برنرررام اكسرررل ا ضرررا قرررارن. 2.01 كثافتررره النسرررب ة
gravity of 0.87. Also, compute the flow rate by . النت ة
Excel and compare the results.
380
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Float ق افة
381
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
The pressure difference (- ∆P) is estimated by ( ببررر الق افررة بم ارنررة الق ر ى- ∆P) عقر فرررع الضرريق
conducting a force balance on the float, where: : ح ك, الم ثر بل الق افة
Pressure force + Buoyancy up thrust = Gravity الق الدافعة بسب ثقل المرار = ق ال اذب ة+ ق الضيق
force
Vf ρf g = Vf ρ g + (- ∆P) Af
: ح ك مثل كل من
where:
Cross section area of the float larger section Af مساحة المقق العرضي لل ان الكب ر من الق افة
Density of the float material Ρf كثافة ماد صن الق افة
Density of the fluid ρ كثافة المائ
If we assign the area between the float and the إلرA2 فاذا رمرنا إل مساحة الحلقة ب ن الق افة األنبر
pipe A2 and the pipe area A1, we can apply ( بلرر7.11) قبقنررا المعادلررةA1 مسرراحة مققرر االنبرر
equation (7.11) to the rotametrer and obtain: : المق اس الدا ر سنحصل بل
G = CD A2 ρ (7.18)
√
( )
Substituting (- ∆p) using equation (1.11): : ( فنحصل بل7.17) ( من المعادلة- ∆p) نع ص بن
G = CD A2 ρ √ (7.19)
382
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
The value of the coefficient CD is dependent on بل ر شرركل الق افررة بل ر مقرردار رقررمCD عتمررد المعاموول
the shape of the float and on Reynolds number ر ن لدر لالمحسب بل اسراس متوسوط القطور الديودروليكي
(in calculating Re, the diameter is to be . 1.0 لحةقة الجريان) كما ه مب ن في الشكل
considered as the hydraulic mean diameter of
the annulus), see fig 7.8.
CD
Fig 7.8 Rotameter coefficient vs Reynolds معامرل المق راس الرد ار ضرد رقرم ر ن لردر ل مثرل1.7 الشكل
number, for three different floats, A, B and C ) ثالثة ق افا مختلفة الشكلA,B,C
These meters are commercially available in بح ر م مختلفررة اذ ك ر ن بعضررها, تت ر فر هررذ المقررا س ت ار را
different sizes. Some are made specifically to برراد. بق رراس ر رران مررائ مع ر ن كرراله اء المرراء, متخصص را
measure the flow rate of a certain fluid such as ال ضرر ر لحسرا معردل ال ر ران برل, ك ن المق اس مردر ا
air or water. The meter is generally calibrated . قرأ مباشر من م ق الق افة
to read the flow rate directly from the
positioning of the float.
383
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Solution الحل
CD = 0.7, dT = 0.025 m, dB = 0.02 m, H = 0.3 m, Vf = 6x10-6 m3, ρ = 123 kg/m3, ρf = 4800 kg/m3
dT
dB
We use equation (7.19) to compute the flow (7.19) باستخدام المعادلةG نحس معدل ال ر ان
rate G
G = CD A2 ρ √ (Eqn. 719)
384
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
The area at the top of the tube At is: : هيAT المساحة في ابل االنب
Af = 3.14 x 10-4 m2
We can now estimate the annulus area A2 التي تسا ي مساحةA2 ان نخمن مساحة الحلقة اآلن
which is the area half way up the tube A1 minus : مساحة الق افة أي, ناقصاA1 في المنتصف االنب
the float area:
A2 = A1 – Af
The two triangles, qse and mne, in Fig 7.10 are : لذاqse mne تشابه المثلثان1.12 ففي الشكل
similar, thus:
m
n
n
q
n
s
n
Fig 7.10 e n
1.77 الشكل
385
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
me = H = 0.3 m
me/qe = 2
Thus the diameter, halfway up the tube d1 is: : هd1 في المنتصف اذن ققر االنب
d1 = (0.00125 x 2) + dB
= (0.00125 x 2) +0.02
d1 = 0.0225 m
A2 = A1 - Af
A2 = 0.836 x 10-4 m
G = 0.0714 kg/s
Exercise تمرين
Calculate the mass flow rate of water when the احس معدل ال ر ان الكتلي للماء ح ن ك ن م ق الق افة في
float is at ¼ the height of the meter tube. . رب ارتفائ االنب
386
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Z0 Z
387
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
In Fig 7.1, it can be noted that depth of the فتررررص ان بمرررع السرررائل فررر ع مسرررت ى1.11 ففررري الشررركل
liquid above the weir is z0; it decreases بنررد اقترررا, الحررم أنرره تنرراقص ترردر ا, z0 الحررا ر ه ر
gradually as the liquid approaches the weir. As a بسب ذلو ترداد سرربة ال ر ران ف نردف, السائل من الحا ر
result, the velocity increases and the liquid . السائل ببر الحا ر إل مسافة مع نة
travels over the weir to a certain distance.
Consider a point in the liquid at depth z above ف ع حافرة الحرا ر نقبرعz لنتخذ نققة ما في السائل بعمع
the weir and apply the Bernoulli equation. If the u فاذا كان سرربة المرائ فري تلرو النققرة, معادلة برن لي
velocity of the fluid at that point is u and the : تصبح المعادلةu0 سرعة االقتراب
approach velocity is u0, the equation will be:
z0 g + =zg+ (7.20)
Equation (7.20) is based on the following : إل االفتراضا الآلت ة1.22 تستند إل المعادلة
assumptions:
(a) the approach velocity is uniform and لأ) سربة االقترا منتممة ثابتة المقدار
constant
(b) stream lines above the weir are parallel ل ) خق ق االنس ا ف ع الحا ر مت ار ة
(c) the atmospheric pressure acts under ل ) الضيق ال ي ثر تح سقح السائل المنردف مرن
the liquid travelling above the weir ف ع الحا ر
(d) the flow is one dimensional-frictionless لك) ال ر ان بات ا احد بد ن احتكاو
Rearranging equation (7.20) will give the ( نحصل بل السربة في نققرة7.20) المعادلة باباد ترت
velocity at any point: : مع نة من
u=√ √ (7.21)
To evaluate the flow rate, we must first know اذ قرد كر ن, تقل تخم ن معدل ال ر ان معرفة ن ئ الحرا ر
the type of weir used. One type is essentially a , أ حرررا را, الحرررا ر مسوووتطي ا ذا حافوووة حووواد عتررررص القنرررا
rectangular sharp-edged flat plate placed أ. ذا ثةمووة مسووتطيةة الشرركل برضررها اقررل مررن برررص القنررا
across the channel. Another type consists of a 1.12 حا را ذا ثةمة مثةثة الشكل كما ه مب ن في الشكل
rectangular notch with a width smaller than the
width of the channel. There is also the
triangular notch weir as shown in Fig 7.12.
388
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Regardless of the type, let us assume the weir ام, ابت اد را, سر اء اكران حرا راb لنفترص ان برص الحا ر
width is b. Now, considering an element of the ذا ثلمة مستق لة نتخذ عنصر اا ص ير اا من مقق الم رى ف ع
stream-cross section, above the edge of the : dQ ف صبح معدل ال ر انdz الحافة ارتفابه
weir, having a depth of dz; thus the flow rate
dQ will be:
dQ = u b dz (7.22)
Substituting u from equation (7.12) into (7.22) ( فري المعادلرة7.12) مرن المعادلرةu برالتع ص برن
equation (7.22): : نت
dQ = b √ √ dz (7.23)
h= (7.24)
389
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
dh = - dz (7.25)
We then substitute equations (7.24 and 7.25) (7.23) ( في المعادلة1.25 , 1.24) ثم نع ص المعادال
into equation (7.23):
dQ = - b √ . h1/2 . dh (7.26)
Substituting h in equation (7.27) using equation (7.27) ( في المعادلة7.24) من المعادلةh نع ص بن
(7.24), and evaluating z between the limits : ( فنحصل بلz = z0) (z = 0) ب نz نق م
(z = 0) and (z = z0), we obtain:
If we assume that the approach velocity u0 صي ر مقارنةu0 اذا افترضنا مقدار سربة االقترا
value is small compared to the velocity u, we ( تصبح المعادلةu0 = 0) ف مكننا علu بالسربة
can then consider (u = 0) and equation (7.28) ( كاآلتي7.28)
will be
Q= b√ z03/2 (7.29)
390
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Equation (7.29) is generally reformulated to ح رك, ( بعرد ا رراء تعرد ل بل هرا7.29) نقبرع براد المعادلرة
include a discharge coefficient accounting for نفخررذ بنمررر االهتمررام تررفث ر االحتكرراو تقل ر ص المقق ر ذلررو
the effect of friction and change in the cross : بادخال معامل التصريف فتصبح المعادلة
section, to be:
Q = CD b√ z03/2 (7.30)
The value of CD is around 0.65 . . 2.75 مقاربة إلCD اذ نتخذ ق مة
However, if the notch is triangular as shown in 1.13 كما ه مب ن في الشكل, اما اذا كان ثلمة الحا ر مثلثة
Fig 7.13, the width b will be varying and its متي ر المقدار تصبح ق متره فري اي نققرة تعلرb ف عد العرص
value at a depth z will be: : z بمقدار
b = 2 . z tan (7.31)
.. b
z0
θ
z
Ignoring the approach velocity u0, and من المعادلةb التع ص بنu0 باهمال سربة االقترا
substituting for b in equation (7.23) using ( نحصررل بل ر معرردل ال ر رران7.23) ( فرري المعادلررة7.31)
equation (7.31), we can obtain the flow rate as كاآلتي
follows
dQ = 2 tan √ √ z dz (7.32)
391
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
1/2
dQ = 2 tan √ (z 0 z – z3/2) z dz (7.33)
1/2
Q = 2 tan √ ∫ z dz (7.34)
We can follow the previous method to integrate فنحصل, مكننا اتبائ نفس القر قة السابقة ال راء التكامل
the equation to obtain: : بل
To compensate for friction and the change in ( للتع ص1.35) في المعادلةCD ثم ندخل معامل التصر ف
cross section, we introduce the coefficient of : بن تفث ر االحتكاو تي ر المقق فتصبح المعادلة
discharge CD to equation (7.35 which will
change to:
The values of CD will be around 0.62. . 2.72 ق مة مقاربة منCD هنا نتخذ
392
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
الحل
Solution :المعل م
Given:
Z1
Z2
Initial depth of water above the opening z1 = 3.2 m بمع السائل ف ع حافة الفتحة قبل بدء التفر ا
Final depth of water above the opening z2 = 0.1 m بمع السائل ف ع حافة الفتحة بعد انتهاء التفر ا
In this case, the depth z0 changes with time. . م الرمنz0 في هذ الحالة تي ر العمع
A dz0 = - Q dt
The minus sign indicates that as the time ررنخفصz0 ح ررك تش ر ر بالمررة النرراقص إل ر أن المسررت ى
increases, the level z0 decreases. However, we مرن المعادلرةQ لكن لد نا معدل ال ر ان, t بارد اد الرمن
have the flow rate Q given by equation (7.30): : ( ه7.30)
393
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
A dz0 = - CD b√ z03/2 dt
dt =
√
t= ( - )
√ √ √
t= ( - )
√ √ √
t = 2712.53 s
-
The Anemometer consists of a wire with 0.0038 mm تررفلف اال نمررر م تر مررن سرررلو ققررر بحرررد د
diameter 0.0038 mm and 1.27 mm long, fixed 1.14 مثب كما مب ن في الشكل1.27 mm ق له ح الي
as shown in Fig 7.14.
394
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
The wire is typically made of a metal coated اذ ترتفر در رة, صن السلو باد من معدن مكس بالبالت ن
with platinum. The temperature of the wire حرارترره بنررد مررر ر ت ررار كهربررائي برره ثررم تررنخفص بنررد تمر ررر
rises as the electrical current passes through it. أي, في حالة التر ارن. المائ ف قه فتتي ر مقا مته الكهربائ ة
It decreases when the fluid passes over the wire صررربح مقررردار القاقرررة, بنرررد ثبررر در رررة حررررار السرررلو
and as a result the electric resistance changes. مقررردار الحررررار المفقررر د مرررن, الكهربائ رررة المصرررر فة مسرررا ا
At equilibrium, when the temperature remains تعقر القاقرة الكهربائ رة مرن حاصرل ضرر الت رار, السرلو
constant, the electric power consumed will be . مربعا في المقا مة الكهربائ ة
equal to the heat loss from the wire.
Fig 7.14 Hot wire anemometer االن م متر ذ السلو الساخن1.77 الشكل
To maintain a constant temperature, the مكررن تي ررر مقرردار الت ررار تثب ر المقا مررة لكرري نحصررل بل ر
current can be changed and the resistance kept در ة حرار ثابتة باستخدام شبكة ويتستون كما ه مب ن في
unchanged in a Wheatstone bridge نسرررتق تثب ررر در رررة حررررار السرررلو هررر, 1.15 الشررركل
arrangement as shown in Fig 7.15. When the ميم ر ر فرري المررائ ال رراري ذلررو بتي ررر مقرردار الت ررار البرراد
resistance of the wire changes, we can change قررراس الت رررار. ترر ارن الشررربكة بنرردما تتي رررر مقا مرررة السررلو
the amount of current to keep the submerged- الكهربررائي الررذي حسر منرره سررربة ال ر رران باسررتخدام ق ر ان ن
wire temperature unchanged; this action will نكتفري هنرا باالشرار, تخص انتقال الحرار م كان و الم ائر
restore the equilibrium to the bridge. Based on عررررد,إلرررر ترررر فر م نحن ررررا تعقرررري السررررربة بداللررررة الت ررررار
the measured current and on heat transfer-fluid حت ر لق رراس سرررئ منخفضررة إل ر, دق ق را, االن م ر م تر مق اس را
لررذا سررتخدم لق رراس ترررا ر السررربة فرري حالررة. 0.03 m/s
mechanics analysis, the value of velocity is
. اضقرا المائ
obtained. However, there are charts for this
purpose providing data in the form of velocity
Anemometer االن م متر
vs current. The anemometer is considered an
accurate instrument to measure low velocities
down to 0.03 m/s, thus it is used to measure
velocity fluctuations caused by turbulence.
395
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Electric magnet
Electrodes
ميناق س كهربائي
This meter is used to measure the flow of ستخدم هذ المق اس لق اس ر ان المعوادن المنصودر كرذلو
molten metals and for slurries. Furthermore, نسبة بال ة مرن المر اد,في الحاال التي ك ن ف ها المائ حامال
the magnetic meter doesn’t cause a pressure ت ردر المالحمرة أن اسرتخدام. )الصلبة لخةيط سوائل وصوةب
drop in the pipe; the flow can also be measured مكررن ق رراس, المق رراس ال سررب انخرراص ضرريق فرري األنبر
in any of the two directions. The meter is ف ررد مثررل هررذا المق رراس فري. ال ر رران فرري أي مررن االت رراه ن
significantly useful in measuring the flow of , مصان األد ة ح ك تقل األمر بدم تل ك المرائ ال راري
medical products where polluting the fluid must مررن ناح رررة ثان رررة رر صرررنابة ررردار االنبرر الرررذي قررراس
ال ر ان ف ه بهذ القر قة مرن مراد ض رم صرلة للكهربراء مثرل
be avoided. To use this meter, the pipe wall
استخدام ت رار ذ ترردد , ماد البولي تترا فةورو اثةيةين
should be made of a non-electric conducting
. ) لهذا اليرص200 Hzبال ل
material such as polytetrafluoroethylene
(PTFE). A high frequency current (200Hz) is
required for the measurement of flow by this
meter.
396
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
397
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
398
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
Ans ج
0.02257 m3/s
7.2 A pito-static tube is placed centrally in a ض انب ب ت – ستات و في مركر انب ققر1.7
pipeline carrying water with a diameter of 0.25 فاذا كان المران متر سر ل فررع ضريق, نقل ماء0.25 m
m. When water is passed through the pipe at a مرن المراء بنرد مرر ر المراء بمعردل41 mm كرافئ
rate of 0.026 m3/s, the manometer registers a أن, احس ر معامررل الق رراس مفترض را, برراألنب0.026 m3/s
pressure drop equivalent to 41 mm of water مت سررق سررربة ال ر رران سررا ي السررربة فرري مركررر االنب ر
head. Estimate the meter coefficient, assuming . 0.83 بالمقدار, مضر با
that the average velocity is equal to the velocity
along the centerline of the pipe multiplied by
0.83.
7.3 A pipe with a 20 cm diameter, transports air 3 m3/min نقرل هر اء بمعردل20 cm انبر ققرر1.7
at a rate of 3 m3/min. An orifice plate is used to فمررا, مررن المرراء200 mm فراذا كرران المرران متر سر ل قررراء
measure the flow rate. If the manometer across ققررر الف هررة لصررف حة مثق بررة مكررن اسررتخدامها لق رراس معرردل
the plate registers 200 mm of water, estimate معامررل1.2 kg/m3 افترررص أن كثافررة اله ر اء. ال ر رران
the diameter of the orifice. Assume the density . 103 kg/m3 كثافة الماء 0.63 التصر ف
of air is 1.2 kg/m3, the discharge coefficient 0.63
and the density of water 103 kg/m3.
Ans ج
399
0.042 m
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
7.4 Water is flowing in a pipe with a diameter of فرري أنبر ققررر1500 cm3/s ررري مرراء بمعرردل 7.4
50 mm, at a rate of 1500 cm3/s. A meter with a 25 mm فراذا اسرتخدم مق راس فر هي ققرر فتحتره, 50 mm
25 mm diameter orifice is used to measure the , بلما, احس معامل التصر ف للمق اس. لق اس معدل ال ر ان
flow rate. Water fills the manometer arms 92 mm بفن قراء مران متر حتر ي بلر رئبرع مراء تسرا ي
above the mercury columns and the كثافرة المراء13600 kg/m3 من الرئبع أن كثافرة الرئبرع
manometer reads 92 mmHg. If the density of . 103 kg/m3
mercury is 13600 kg/m3 and the density of
water is 103 kg/m3, compute the discharge
coefficient for the meter.
Ans ج
0.62
7.5 The air flow in a channel of diameter 0.34 ب اسرقة0.34 m قراس ر ران الهر اء فري قنرا ققرهرا1.7
m, is measured by a pitot tube positioned at فراذا. ضر فري نقراق متعردد ببرر مققر القنرا انب ب تر
several points across the section of the channel. س ر ل قررراءا مرران متر مررائي فرري تلررو النقرراق الترري تق ر فرري
If the manometer readings recorded centrally at منتصف بشرر حةقوات متمركوز متسرا ة فري مسراحة المققر
10 annuli of equal cross section areas, are: : العرضي كاآلتي
10 9 8 7 6 5 4 3 2 1 رقم الم ق
Position
10.2 11.4 12.7 13.7 14.7 15. 7 16.8 17.5 18.0 18.5 قراء المان متر
Manometer
reading ( mm H2O)
Calculate the volumetric flow rate in the أحس معدل ال ر ان الح مي في القنا ثم ارسم ت ر السربة
channel and plot the velocity distribution.
Note: Calculate the area of the annular section أحس مساحة الحلقة ثم احس أققار الحلقا: م حظة
and then calculate the diameter of each بعد ذلو مكنو تع ن نققة, من الخارج إل المركر, مبتدئا
annulus, starting from the outside proceeding .المنتصف لكل حلقة من المركر ليرص رسم ت ر السربة
toward the centre. You can then specify the
central point, for each annulus, required for the
velocity distribution plot.
400
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
7.6 Determine the time required to empty a احس الرمن الالرم لتفر ا خرران نصرف كرر ي ققرر1.7
hemispherical vessel with a diameter of 3 m, 25 cm مملر ء بالمراء خرالل ف هرة فري األسرفل ققرهرا3 m
full of water through a 25 cm diameter hole at . 0.655 أن معامل التصر ف للفه هة, بلما
the bottom. The discharge coefficient for the
hole is 0.655.
7.7 A pipe with a diameter of 10 cm, transports 2.. نقرل نفرق كثافتره النسرب ة10 cm انبر ققرر1.1
oil of specific gravity 0.9. A veturi meter is used . 5 cm متصل بمق راس فنتشر ري الرذي بلرا ققرر االصرير
to measure the flow rate. The smaller diameter احسر, من الرئبرع3 cm فاذا كان المان متر الرئبقي س ل
of the meter is 5 cm and the mercury رررد قرررراء المررران متر حررر ن رررربق. معررردل ال ر ررران الح مررري
manometer reads 3 cm Hg. What will be the . حمل نفس معدل ال ر ان الح مري مرن المراء المق اس بانب
volumetric flow rate of the oil? If the meter is كثافة المراء, سا ي احداCD افترص ان معامل التصر ف
connected to a pipe carrying the same flow for . 103 kg/m3
water, determine the reading of the
manometer. The discharge coefficient CD = 1
and the density of water is 103 kg/m3.
Ans ج
7.8 The height of a rotameter is 0.35 m, its top ققرر الرداخلي0.35 m بلا االرتفائ لمق راس د ار1.7
internal diameter is 25 mm and its bottom . في المقق االسفل20 mm في المقق االبل25 mm
internal diameter is 20 mm. The diameter of the كثافرررة مررراد صرررنعها20 mm فررراذا كررران ققرررر الق افرررة
float is 20 mm, the density of the float material معامررل التصررر ف, 6.6 cm3 ح مهررا4800 kg/m3
is 4800 kg/m3, the discharge coefficient is 0.75 احس ارتفائ م ق الق افة بند مر ر ماء كثافته0.75
and the float volume is 6.6 cm3. Estimate the . 100 cm3/s بالمق اس بمعدل103 kg/m3
position of the float when water with a density
of 103 kg/m3, passes through the meter at
100 cm3/s rate.
401
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
7.9 Water is discharged from an opening at one فرررا المرراء مررن خررران خررالل فتحررة انب ررة ف رره ق له را1.7
of the sides of a vessel. If the length of the احس ر مقرردار تصررر ف المرراء, 2 m ارتفابهررا1.2 m
opening is 1.2 m and its height is 2 m, calculate اذا كرران بمررع المرراء فر ع الحافررة العل ررا للفتحررةm3/s ب حردا
the rate of water discharge in m3/s. The depth . 0.64 افترص مقدار معامل التصر ف. 0.5 m
of water above the top edge of the opening is
0.5 m and the discharge coefficient is 0.64.
Ans ج
0.19 m
7.10 In a laboratory experiment, water is passed مرر الماء في ت ربة مختبر ة خالل مق راس فنتشر ري1.77
through a venture meter and then over a 900 18.2 cm ثم ف ع ثلمة مثلثة ف س ل بم د الماء ف ع الثلمة
angle triangular notch. The registered-water فرررع بمرر د الضرريق فرري, 900 فرراذا كانرر را ررة الثلمررة,
head above the notch was 18.2 cm and the احس ر معامررل, مررن المرراء0.339 m مق رراس فنتشرر ري
pressure difference across the venturi was , 2.7 معامررل التصررر ف للثلمررة, التصررر ف للمق رراس مفترض را
0.339 m-water. Compute the meter discharge . 10 cm ققر بنقه25 cm ان ققر انب فنتش ري, بلما
coefficient; assuming the notch discharge
coefficient is 0.6. Consider the venture larger
diameter 25 cm and the throat diameter 10 cm.
Ans ج
0.974
7.11.1 Use Excel to solve problem 7.5 مستخدمف برنام االكسل1.5 ابد حل الس ال1.77.7
7.11.2 Conduct an Internet research about flow اسررتخدم االنترنر ال ررراء بحثررا بررن مقررا س ال ر رران1.77.7
measuring devices used in the oil refining المستخدمة في مصافي النفق
industry
402
FLOW MEASURING INSTRUMENTS 7 اجهزة قياس الجريان
7.11.4 Compare the flow measurement devices تلو قارن ب ن مقا س ال ر ان المستخدمة لليارا1.77.7
used for gases to those used for liquids للس ائل
403
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Analyze the performance of pumps and اجراء تحليالت االداء للمضخات وحساب .1
compute the power supply متطلبات القدرة
2. Explain the concept of NPSH and solve تفسييييير كيييييرة صييييا ي ميييييود السيييييحب .2
relevant problems الموجب وحل المسائل ذات العالقة
3. Describe different types of pumps شرح انواع مختلفة من المضخات .3
4. Appreciate the fundamentals of gas هم مباديء ضغط ود ع الغازات .4
movement and compression
5. Describe gas moving equipment شرح اجهزة د ع الغازات.5
6. Calculate the power requirement to compress حسيياب القييدرة الالزميية لضييغط الغييازات.6
gases using multistage reciprocating باسيييتخدام ضيييا طات تردديييية متعيييددة
المراحل
compressors
404
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
405
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
A certain amount of energy is normally supplied سيواء كانيت طاقية, تجهز المضيخة بمقيدار معيين مين الطاقية
to the pump; the energy can either be electric تقيييوم بتحويلهيييا. كهربائيييية م طاقدددة مسدددمنبطة مدددن الوقدددود
or extracted from fossil fuel. The pump ميكانيكييييا د ىليييخ الشيييغل اليييذي يصيييرف ليييخ د يييع السيييائل يييي
converts the energy to mechanical work to push و يي الواقيع هيذا هيو شدلل ةمدود االدارة اليذي مير, المنظومية
the liquid around the system. In fact, this work وينقص مقدار شغل مود االدارة ن. ذكره ي معادلة الطاقة
is the shaft work which was included in the الطاقييية المجهيييزة ىليييخ المضيييخة بمقيييدار معيييين تحيييدده كفددداءة
energy equation covered earlier. The shaft work و موم يا د تعييرف الكفيياءة بمقييدار. η المضددخة التييي يرمييز لهييا
الطاقة الخارجة من الجهاز التي يستفاد منها مقسوما د لخ مقدار
is less than the supplied energy to the pump by
حي يتسرب قسم من الطاقة ي المضيخة. الطاقة المجهزة له
an amount determined by the pump efficiency
اُنيياء تحويلهييا ميين شييكل ىلييخ خيير بسييبب االحتكييا او تسييرب
denoted η. Generally speaking, the efficiency is
و ي حالة استخدام محير. الطاقة الحرارية مباشرة ن وجدت
defined as the ratio of the amount of useful
كهربيييائي لتشيييغيل المضيييخة يييان نسيييبة مييين القيييدرة الكهربائيييية
output energy to the input energy. The energy هييذا, وذلي حسييب الكفياءة الكهربائييية للمحير, المجهيزة تفقييد
losses by the pump are either in the form of . باالضا ة ىلخ ضياع الطاقة بسبب االحتكا
heat, or friction due to conversion from one
form of energy to another. In the case of using
an electric motor to run a pump, a certain
percentage of electric power is lost; the amount
of which is defined by the electric efficiency of
the motor. There are of course the friction
losses as well.
The power gained, by the fluid from the pump, (-Ws) القدرة التي يكتسيبها الميائع مين المضيخة تسياوي الشيغل
is given by the shaft work (-Ws) multiplied by وهكييذا نسييتنتع العالقيية. G مضييروبا د بمعييدل الجريييان الكتلييي
the mass flow rate G. Thus we obtain the : اآلتية
following equation:
We apply the energy equation to a pump in a نطبع معادلة الطاقة لخ مضخة ي منظومة جريان لخ
flow system as follows: : النحو اآلتي
406
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
To get the power, we multiply the two sides of لنحصل لخG ) بمعدل الجريان2.2( نضرب طر ي المعادلة
the equation by the flow rate G: : القدرة
P2
(2)
P1
(1) z2
z1
Pump مضخة
Fig 8.1 Pumping system between two vessels منظومة ض بين خزانين8.8 الشكل
407
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Equation (8.3) can be simplified according to ( حسب ترتييب المنظومية وطبيعية2.3) ويمكن تبسيط المعادلة
the fluid type and to the system set up. If the يييياذا ييييد السييييائل مائعييييا د ييييير انضييييغاطي يصييييبح, المييييائع
fluid is incompressible, the result of the integral واذا كيان السيائل, v (P2 – P1) يسياوي ∫ التكاميل
∫ will be v (P1 – P2). Moreover, if the يض من خزان مفتوح الخ الجو ىلخ خزان اخير كميا هيو مبيين
liquid is being pumped from an open vessel to و, P2 وP1 سوف يتساو الضيغطان2.1 ي الشكل
another, as shown in Fig 8.1, the pressures P1 ن. يهميييل كيييذل مقيييدار الطاقييية الحركيييية يييي هيييذه المنظومييية
and P2 will be equal in value. Also, the kinetic ,) ضعيفتا المقدار2( ) و1( السر تين ̅ و ̅ ي النقطتين
energy term will be ignored, because the : ( ىلخ8.3) و ليه تختصر المعادلة
velocities ̅ and ̅ at (1) and (2) are low.
Accordingly equation (8.3) will be reduced to:
It is worth noting that the friction losses Lf تشيمل ضيياع الطاقيةLf و تجدر مالحظة ن خسيائر االحتكيا
include energy losses in the pipe, valves and و, نبييوب والصييمامات وقطييع تركيييب االنابيييب و يرهييا.ييي ا
fittings. The minus sign indicates that the work ,تشير المة الناقص ىلخ ن الشغل هو شغل مبذول لخ المائع
is done on the fluid. In case of pumping the و ي حالة ضي السيائل يي انبيوب طوييل تطبيع معادلية الطاقية
liquid in a long pipeline, the energy equation لخ تحتي البدايية والنهايية وتحسيب السير ة يي نقطتيين ليخ
will be applied to the inlet and outlet. The اساس معدل الجريان الذي يكون ُابت المقدار ي انبوبي الض
velocity estimation, at two points in the pipe, is . وينبغي ايضا د مالحظة مقدار الضغط ي النقطتين, والسحب
based on the constant value of the flow rate in
the discharge and suction lines; and on the
values of the pressure at the two points.
The power requirement to drive a gas into a و يمييا يخييص تخمييين القييدرة الالزميية لييد ع الغيياز ييي منظوميية
piping system is determined by applying the )1( ميُالد الخزانيان, تطبع معادلة الطاقة لخ نقطتين, انابيب
energy equation at two points, such as vessel حي ي يكييون الضييغط ييي المنظوميية, 2.2 ) ييي الشييكل2( و
(1) and vessel (2) in Fig 8.2. The pressure inside ∆ والطاقييةz واذا اهميل تيييُير ييرع االرتفيياع, P1 ا لييخ ميين
the system is obviously higher than P1. By الحركييية نجييد ان معظييم القدددرة المبلولددة ييي أجهددزة دفددع
ignoring the effect of height ∆z and kinetic P2 ىليييخP1 اللدددازا تصيييرف ليييخ ر يييع ضيييغط الغييياز مييين
energy, we will find most of the consumed والتيي تعتمييد بيدورها لييخ نيوع ملييية ر يع الضييغط يي جهيياز
power in gas moving equipment is used to raise لنفترض مُالد ن العملية تتم بثبو درجة الحرارة لذا. الض
the pressure from P1 to P2. The determination (∫ ) يصييبح الشييغل المبييذول لييخ ر ييع ضييغط الغيياز
of power depends on the type of compression وتحسييب القدددرة المجهددزة, [P1 v1 ln (P2/P1)] مسيياويا د
process inside the equipment. For example, if . بضرب الشغل بمعدل الجريان وتقسيمها لخ كفاءة الجهاز
the compression is isothermal, the work done
to raise the pressure (∫ ) is [P1 v1 ln (P2/P1)]
and power supply is the work done multiplied
by flow rate and divided by the efficiency.
408
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
P2
P1
Solution
الحل
Given:
: المعلوم
ρ = 0.85 x 103 = 850 kg/m3, µ = 3 x 10-3 Ns/m2, d = 0.05 m, l = 100 m, e = 0.05 x 10-3 m,
409
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Ignore the kinetic energy and apply equation ) لحسياب القيدرة8.4) نهمل الطاقة الحركية ونسيتخدم المعادلية
(8.4) to calculate the required power for الالزميية لض ي السييائل ُييم نقسييمها لييخ الكفيياءة اليجيياد القييدرة
pumping the liquid. The power is then divided . المجهزة
by the efficiency to estimate the supply power.
We compute the friction losses Lf using ( لخ النحو5.9) بموجب المعادلةLf نحسب خسائر االحتكا
equation (5.9) as follows: :اآلتي
̅
- Pf = 4f ρ (Eqn. 5.9)
We find the value of f from Fig 5.7 as follows: : كاآلتي5.5 باستخدام المخطط ي الشكلf نستخرج قيمة
̅
Re =
We read the value of f from Fig 5.7, which is من المخططf ي الفصل الخامس نقر قيمة5.5 ومن الشكل
about 0.0062; we substitute in equation (5.9): : )5.9( ُم نعوض ي المعادلة0.0062 وهي بحدود
410
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Lf = 103.2 J/kg
G=Qρ
We calculate the power using equation (8.4) (2.4) ُم نحسب القدرة بالتعويض ي المعادلة
The efficiency of the pump is 0.5, therefore the لييذا تصييبح القييدرة التييي يجييب0.5 و لمييا كانييت كفيياءة المضييخة
supply power will be: : تزويدها للمضخة اآلتي
851.19/0.5 = 1702.38 W
Thus the supply power to the pump is 1.7 W. . 1.7 kw او ان القدرة التي يجب تجهيزها للمضخة تساوي
411
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
(2)
0.4 m
(1)
Pump مضخة
Solution الحل
Given: :المعلوم
The total head = pressure head + kinetic head + + مود الطاقة الحركية+ العمود الكلي = مود الضغط
potential head + friction head العمود المكا ئ لخسائر االحتكا+ مود الوضع
412
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
̅
∆h = + + ∆z + hf (8.5)
∆h is the total liquid head developed by the ∆ مود السائل الكلي الذي تولده المضخة بينh حي يمُل
pump between (1) and (2), ignoring friction: : نهمل تيُير االحتكا ي ن, )2( ) و1( النقطتين
The pressure in the suction line will be: : واآلن نحسب مقدار الضغط ي نبوب السحب
P1 is gauge pressure or relative pressure, the و تشيييير المييية, هيييو ضيييغط المقيييياس ي ضيييغط نسيييبيP1
minus sign indicates that the pressure is below النيياقص هنييا ىلييخ انييه ضييغط ييراغ اي قييل ميين مقييدار الضييغط
atmospheric and is vacuum. . الجوي
∆h = + + 0.41
∆h = 42.09
413
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Comments المالحظا
(a) The absolute pressure between (1) and )1( ( ) يمكن ايجاد الضغط المطلع ي النقطتين
(2) can be determined as follows: : ) لخ النحو اآلتي2( و
And we will get the same value for the pressure (P2 – P1) ونتوصل لنفس النتيجة لفرع الضغط
difference (P2 – P1)
(b) Note that the value of the kinetic head (ب) الحظ ان مقدار ميود الطاقية الحركيية البيال
0.092 is very small and therefore it had ضئيل بحي يمكن اهماله دون تييُير0.092
no impact on the answer. . ملحوظ ي الجواب
Exercise ممرين
If a liquid of specific gravity 0.87 is pumped 2.2 ييي المُييال0.25 اذا اسييتبدل الميياء بسييائل كُا تييه النسييبية
instead of water, what will be the total head? . ا د الحل مستخدمي برنامع االكسل
Use Excel to solve the exercise.
8.4 Net positive suction head (NPSH) (NPSH) صافي ةمود السحب الموجب8.8
The total suction head hs can be defined by بتطبييع معادلية الطاقيةhs يمكين تعرييف ةمدود السدحب الكلدي
applying the energy equation to point (1) and كاآلتي2.1 ) ونقطة دخول السائل ي الشكل1( لخ النقطة
the suction in Fig 8.1 as follows
̅
+ + hfs = z1 + (8.6)
The total suction head hs is the sum of the يسيياوي مييود الضييغطhs والمعلييوم ان مييود السييحب الكلييي
pressure head and kinetic head at the pump زائييداد مييود الطاقيية الحركييية ييي مييدخل المضييخة لييذا تصييبح
inlet, hence the equation becomes: : المعادلة
hs = z1 + - hfs (8.7)
414
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
̅ denotes the average velocity at the pump هيو الضيغطPs ̅ هو متوسط السر ة ي مدخل المضخة و
inlet, Ps is the pressure at the inlet and hfs ةمود السائل المكافئ لخسائرhfs ي مدخل المضخة و يمُل
represents the friction head in the suction line. و ي حالة سحب السائل مين, االحمكاك ي انبوب سحب السائل
In the case of pumping a liquid from a low ويعرف صدافي ةمدود السدحب. سالبا دz1 موقع منخفض يصبح
location, z1 will be negative. The net positive ) بمقيييدار ميييود الضيييغط اليييذي يجيييب انNPSH( الموجدددب
suction head (NSPH) is defined as the pressure يي ميدخل المضيخةhv يضاف ىلخ ةمود ضدلط بخدار السدائل
head that must be added to the liquid vapour و بمعنيخ خير لين تضي المضيخة ميا ليم. لكي ينسيحب السيائل
pressure head hv to effect pumping. In other يصييبح مييود السييحب الكلييي مسيياويا د او ائق يا د مجمييوع صييا ي
words, the pump will not draw and pump the و بعكسيه. مود السحب الموجب و ةمود ضلط بخار السدائل
liquid unless the total suction head equals or ي انبوب السيحب تحصيل يتبخر السائل جزئيا د مكونا فقاةا
exceeds the sum of the net positive suction ظيياهرة المجددوف التييي تييإدي ىلييخ صييعوبة سييحب السييائل ىلييخ
head and the vapour pressure head. If it is less, : ذن. المضخة
the liquid will partially vaporise forming bubbles
in the suction line causing cavitation; this will
disrupt pumping of the liquid, thus:
hs = NPSH + (8.8)
z1 + – hfs = NPSH +
Centrifugal pumps are extensively used in اذ تسيتخدم, تكمن اهمية هيذه المضيخات يي تعيدد اسيتخداماتها
industry to pump water, oil, corrosive liquids لض المياه والسوائل الكيميائية والنفطيية والسيوائل التيي تسيبب
and slurries, such as concrete mix. كميا ويمكين اسيتخدامها لضي مدزي السدائل و, الصد والتآكيل
. الصلب مُل خالئط االسمنت بالماء
415
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The liquid is drawn axially to enter the rotating ينسحب السائل باتجاه محور المضخة يدخل الجزء الدوار الذي
part of the pump, known as the impeller. It is ُييم ينييد ع ىلييخ الجددزء الحلزونددي. يسييمخ الدفاةددة المروحيددة
then pushed to the volute, by centrifugal force, و تتيلف. بسبب قوة الطرد المركزي يخرج خالل انبوب الد ع
to exit from the discharge port. The impeller الد ا ة المروحية من دد من االريدا المنحنيدة مُبتية ميا بيين
consists of a number of curved vanes; these are وتيييدار الد ا ييية. صيييفحتين دائيييريتين مكونييية مميييرات للسيييائل
fixed between two circular plates forming و يييدخل. المروحيية بواسيطة ةمددود االدارة المتصيل بيالمحر
ميود االدارة ىلييخ غدالف المضددخة المحييط بالد ا يية المروحييية
passages for the liquid. The impeller is driven by
خالل صندوق الحشوة الذي يحتوي ليخ حشدايا مندع المسدرب
a motor through a shaft attached to it. The
. 2.4 انظر الشكل
shaft passes into the pump casing through a
stuffing box containing sealing rings, see
Fig 8.4.
Fig 8.4 Centrifugal pump Wikipedia under the مضخة الطرد المركزي8.8 الشكل
public domain
The liquid gains kinetic energy from the impeller يكتسييب السييائل طاقيية حركييية ييي الد ا يية المروحييية ُييم يتحييول
and most of it will be converted to pressure القسييم االكبيير منهييا ىليخ طاقيية ضييغط يييزداد ييرع الض يغط بييين
energy. Consequently, the pressure difference . وهة السحب و وهة الد ع
between the suction and discharge ports
increases.
416
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The pressure difference pushes the liquid into . ويعمل رع الضغط لخ د ع السائل ي منظومية الجرييان
the flow system. The conversion efficiency of و تعتمييد كفيياءة التحييول ييي الطاقيية لييخ دقيية تصييميم و صيينع
the kinetic energy depends on the design, the . المضخة و لخ الخواص الفيزيائية للسائل
manufacture of the pump and on the liquid
properties.
417
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
∆h
η
PE
Q
Fig 8.5 Characteristic curves for a centrifugal الشكل 8.8المنحنيات المميزة لمضخة الطرد المركزي
pump
The optimum operating conditions for running و يييتم تعيييين ا ضييل ظييروف لتشييغيل المضييخة باختيييار نقطددة
the pump is determined by identifying the duty المشددليل ,وهييي نقطيية تقيياطع العمييود النييازل ميين نقطيية اقصييخ
point. The duty point is the intersection of the كفياءة مييع منحنييخ العمييود الكليي .ويالحييظ ييي الشييكل 2.5ان
vertical from the maximum efficiency with the مقدار العمود الكلي ينخفض بازدياد معدل الجريان .ولو رسمنا
total head curve. It is noted in Fig 8.5 that the منحني يا د يخييص العمددود الكلددي لمنظومددة الجريييان ∆hsسيينجد
total head decreases as the flow rate increases. العمود الكلي للمنظومة يزداد بازدياد معدل الجريان ,ي كس
If we plot the total system head ∆hs vs. the flow المنحنييي المميييز للعمييود الكلييي الييذي يسييمخ منحنددي المضددخة .
rate, we will that it increases with the increase ويمكن تعين نقطة التشغيل من تقاطع المنحنيين ,كميا هيو مبيين
of the flow; thus the reverse of the ي الشكل . 2.6
characteristic curve of the total head known as
the pump curve.
Pump curve
منحني المضخة
System curve
منحني المنظومة
∆h
Duty point
نقطة التشغيل
Fig 8.6 Duty point الشكل 8.8نقطة التشغيل
Q
418
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Discharge التصريف
3
(m3/s) 0.0059 0.0056 0.0050 0.0039 0.0028 (m /s)
Solution الحل
: المعلوم
Given:
قيم للتصريف و العمود الكلي التي نرسم منها المنحنخ المميز
The values for the discharge and total head; this
للمضخة
is to plot the pump characteristic curve.
419
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
̅ ̅
Friction losses in the heat exchanger = ( ) ( ) = ي المباديء الحراري خسائر االحتكا
We compute the total system head ∆hs in terms (2.5) ∆ من المعادلةhs نوجد العمود الكلي لمنظومة الجريان
of Q using equation (8.5): : Q بداللة
̅
∆h = + + ∆z + hf (Eqn. 8.5)
Q = (π d2 /4) ̅ = π x 0.0752 x ̅
̅ = 232.5 Q
We calculate the total friction losses in the heat ييييي المبييييادل الحييييراري ن حسييييب مجمييييل خسييييائر االحتكييييا
exchanger and the pipe: :نبوب.وا
̅ ̅
hf = +4f
̅
hf = (8 + 2f )
hf = 2.205 x 105 Q2
̅
Ignoring the small value of the kinetic head ( وذلي لضيآله ) نهمل العميود المكيا ئ للطاقية الحركيية
̅
and assuming the pressure inside the قيمتيييه واذا ا ترضييينا الضيييغط يييي المبيييادل الحيييراري مسييياويا د
heat exchanger is atmospheric, then the , ( مهميالد ايضيا د للضيغط الجيوي يصيبح ميود الضيغط
pressure head will also be ignored. Thus : ( ىلخ2.5) و ليه تختصر المعادلة
420
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
We can now substitute values of flow rate Q in يييي المعادليييةQ واآلن نعيييوض بقييييم مختلفييية لمعيييدل الجرييييان
the above equation and compute the ون حسييب القيميية المنيياظرة للعمييود الكلييي لمنظوميية الجريييان ُييم
corresponding values for the total system head. ي المنحني المميز ومنحني العمود الكليي ضيد, نرسم المنحني
Accordingly we can plot the characteristic curve . 2.5 انظر الشكل, التصريف للمنظومة
as well as the total head vs. discharge.
See fig 8.7.
The two curves intersect at the duty point and ويالحظ ن معدل الجريان, يتقاطع المنحنيان ي نقطة التشغيل
the flow rate is noted at that point to be واآلن نحسيب, نيد نقطية التشيغيل0.00523 m3/s يسياوي
0.00523 m3/s. Now we can estimate the total : العمود الكلي
head:
∆hs = 15.96 m
Power is energy per unit time, that is والقدرة تساوي الطاقة لوحدة الزمن وهي
Power = G (∆h x g)
We obtain the supply power to the pump by و بتقسيم القدرة لخ الكفياءة نحصيل ليخ مقيدار القيدرة اليالزم
dividing the power by the efficiency تزويد المضخة بها
PE = G (∆h x g)/η
PE = 1637.69 W
Pump characteristic
منحني المضخة
∆hs =10 + 2.205 x 105
Q
∆h (m)
3 3
Q = 0.00523 m /s Q (m /s)
Fig 8.7 8.8 الشكل
421
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Exercise ممرين
Plot the curves using Excel and determine the ارسم المنحنيات مستخدمي برنامع اكسيل ُيم يين نقطية التشيغيل
duty point; compare the results with those of . 2.2 وقارن النتائع مع نتائع المُال
example 8.2.
PE = f (ρ, D, N) (8.10)
Applying the dimensional analysis method, التي مر شرحها يي الفصيل, وباستخدام طريقة التحليل البعدي
covered in chapter 1, we can arrive at the : ول يمكن استنتاج الصيغة اآلتية.ا
following:
PE = C1 ρ D5 N3) (8.11)
The power is also proportional to the product of و كذل تتناسب القدرة طرداد مع حاصل ضرب معدل
the flow rate Q and the total head ∆h, that is: : اي ان, ∆h والعمود الكليQ الجريان
PE α Q . ∆h
or و
PE = C2 Q ∆h (8.12)
422
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The flow rate Q and the total head developed ∆ الييذي تولييدهh والعمييود الكليييQ وييرتبط معييدل الجريييان
by the pump ∆h are related to the rotation D وقطيير الد ا يية المروحيييةN المضييخة بسيير ة الييدوران
speed N and the diameter of the impeller D by : بالمعادلتين اآلتيتين
the following two equations:
Q = C3 N D3 (8.13)
g . ∆h = C4 N2 D2 (8.14)
C3 and C4 are constants; equation (8.14) can be (2.14) ويمكيين كتابيية المعادليية, ُوابييتC4 , C3 حيي
written in the following format بالصيغة
Since g is constant, we can write the equation in C5 ُابت يمكن كتابة المعادلة بداللة ُابت خرg و با تبار
terms of another constant C5 as follows
(∆h)3/2 = C5 N3 D3 (8.16)
We then divide equation (8.13) by equation ( ونحصيل2.16) ليخ المعادلية ( 2.13) ُيم نقسيم المعادلية
(8.16) to obtain: : لخ
or
و
√
= Ns (8.18)
423
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Ns is a constant called the specific speed and its ُابيييت يطليييع لييييه السددرةة النوةيدددة حيييي تعتميييدNs وهنييا
units depend on the units of Q, N, and ∆h, it has (LT-2 )3/4 ∆ وابعاده هيh , N, Q وحداته لخ وحدات
the dimensions (LT-2)3/4. A non-dimensional وتسيييتخدم احيانيييا د صييييغة يييير بعديييية للسييير ة النو يييية حسيييب
formula for the specific speed is sometimes : المعادلة اآلتية
used, which is:
= Ns (8.19)
The specific speed is considered as a وتحسيب, و تعد السر ة النو يية رقمدا مميدزا لنيوع المضيخة
characteristic number to specify the type of و تصييبح المضييختان. نييد ا ضييل كفدداءة نوةيددة للمشددليل
pump; it is calculated at the peak specific مختلفتي الحجم ممماثلمين هندسيا حين تكيون السير ة النو يية
efficiency of operation. When the non- ضييا ة ىلييخ امكييان تطبيييع. ييير البعدييية لهمييا ُابتيية المقييدار
dimensional specific speed of two pumps is : العالقات االتية لهما
constant, the pumps will be geometrically
similar. Further, we can apply the following
relationships to such similar pumps:
=( ) ( )3 (8.20)
=( )2 ( )2 (8.21)
=( )3 ( )5 (8.22)
By applying equations (8.20-8.22) we can plot ) ايجيياد منحنيييات2.22-2.20 ( ونسييتطيع باسييتخدام المعييادالت
characteristics curves for a pump in terms of مميزة للمضخة بداللة معلوميات تخيص مضيخة اخير مشيابهة
data obtained for another similar pump. . لها
The following relationships can be used to when و يمكن تطبيع المعادالت اآلتية يي حالية تبيديل قطير المروحية
the impeller size is changed for the same pump: : الد ا ية لنفس المضخة
424
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
=( ) ( ) (8.23)
=( )2 ( )2 (8.24)
=( )3 ( )3 (8.25)
:لدينا
We have: 3
=( ) ( ) (Eqn. 8.20)
2 2
=( ) ( ) ( Eqn. 8.21)
425
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
= (900/N2) (0.3/D2)3
D2 = 0.405 m
N2 = 730 rpm
The rotation speed can also be determined و كذل يمكن حساب سر ة الدوران باستخدام السر ة النو ية
using the non-dimensional specific speed: : الالبعدية
= Ns (Eqn. 8.19)
Since the two pumps are geometrically similar, لهذا تُبت السر ة, والمعلوم ان المضختين متماُلتان هندسيا د
the following relationship is applied: : النو ية وتستخدم الصيغة
N2 = 730 rpm
426
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
8.5.3 Two or more pumps in flow اسددمخدام مضددخمين أو أكثددر فددي منظومددة8.8.8
system الجريان
In some cases, the pumping of liquids requires و, يستلزم ض السوائل احيانا د استخدام كُر من مضخة واحدة
more than one pump. The way the pumps are فيي. يمكن ربيط مضيختين اميا ليخ التيوالي او ليخ التيوازي
arranged is either in series or in parallel. For a ولييخ بييانبوب.ولييخ يتصييل انبييوب الييد ع للمضييخة ا.الحاليية ا
series connection, the discharge line of the first السيييحب للمضيييخة الُانيييية يصيييبح العميييود الكليييي النييياجم مييين
pump is attached to the suction line of the Δh2 وΔh1 يسيياوي مجمييوع العمييودينΔhT المخضييتين
second. The total head ΔhT for the two pumps ( انظييرQT = Q2 = Q1) بينمييا يبقييخ التصييريف ُابتيا د ي ان
will be equal to the sum of the two heads Δh1 . 2.2 الشكل
and Δh2. The discharge remains unchanged,
that is (QT = Q1 = Q2), see fig 8.8.
ΔhT
Δh1 Δh2
Q1
1
(1) (2)
427
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
ΔhT
Q1
QT
Q2
QT
The duty point for two pumps connected in ويمكن ايجاد نقطة المشليل لمضختين مربوطتين لخ التوالي
series can be estimated as follows: : كاآلتي
(a) We plot the characteristic curve for لكييلQ ∆ ضييدh ( ) نرسييم المنحنييي المميييز
each pump separately ( h vs. Q); also, و كذل منحنخ العمود الكليي, مضخة لخ انفراد
the total head vs discharge (ΔhT vs. Q), , (ΔhT vs. Q) لمنظومة الجريان ضد التصريف
as shown in Fig 8.10. . 2.10 كما هو مبين ي الشكل
∆h
Pump 2
Fig 8.10 Duty point for two pumps in series نقطة التشغيل لمضختين مربوطتين لخ التوالي8.88 الشكل
428
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
(b) We draw a vertical line to the (ب) نرسم اي خط مودي لخ االحداُي اال قي
horizontal axis, intersecting the three Δh2 وΔh1 بحي يقطع المنحنيات الُالُة ي
curves at Δh1, Δh2 and Δhs. . Δhs و
(c) We calculate the total head for the : ( جـ ) نحسب العمود الكلي للمضختين
two pumps:
(d) We compare ΔhT to Δhs, and if the ييييياذا وجيييييدناΔhs بيييييالعمودΔhT ( د) نقيييييارن
two values are far apart, we repeat القيمتييين مختلفتييين كُيييراد نعيييد الخطييوات ( ب) و
the steps (b), (c) and (d) until Δhs بقيمييييةΔhT (جييييـ ) و (د) حتييييخ مسيييياواة
ΔhT ≈ Δhs. At that condition, we ندئذ نحصل لخ نقطة التشيغيل المحيددة, تقريبا د
obtain the duty point defined by the خييرة و التصيريف. اΔhT بقيمتي العمود الكلي
last value of the total head ΔhT and .QT
the corresponding total discharge QT.
Pump 1
∆h
Pump 2
Fig 8.11 Duty point for two pumps in parallel نقطة التشغيل لمضختين مربوطتين لخ التوازي8.88 الشكل
429
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
QT = Q1 + Q2 (8.27)
The duty point can also be determined by the ويمكن ايجاد نقطة التشغيل بطريقة ُانية وذل مين نقطية تقياطع
intersection point of the characteristic curve ميييع منحنيييخ العميييود الكلييييQT ضيييدΔhT المنحنيييخ الممييييز
(ΔhT vs. QT) with the total head of the system باسيتخدامQT اذ تحسيب قييمQ ضيدΔhs للمنظومية
(Δhs vs. Q). The values for QT are computed by Q2 وQ1 ( لخ اساس قيم معلومة لكل من2.25) المعادلة
equation (8.27) based on known values of Q1 وتطبييع هييذه الطريقيية لييخ المضييخات المربوطيية لييخ التييوالي
and Q2. This method can be applied to the . (2.27) ( بدالد من2.26) ايضا د باستخدام المعادلة
series connection using equation (8.26) instead
of (8.27).
(a) The pump assembly is simple and ( ) بساطة تركيبها لذا يمكن صنا تها من مواد
therefore it can be manufactured مختلفة مُل الصلب واللدائن و يرها
from various materials such as
steel and plastics etc
(b) The rotation speed is high enough (ب) سر ة دورانها الية لذا يمكن ربطها
to allow coupling to an electric بمحر كهربائي
motor
(c) The pump delivers a pulsation- (ج) ا طاإها تصريفا د خاليا د من الذبذبات
free discharge
(ت) كلفة صيانتها المنخفضة نسبة ىلخ المضخات
(d) It has a relatively low
االخر
maintenance cost
430
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
(e) The pump will not get damaged ( ) سالمتها من الضرر حين يحصيل انسيداد يي
upon sudden blockage, provided ىال يييي حالييية اشيييتغالها, نبيييوب التصيييريف
it is not left operating for a long لفترات طويلة
time خر التيي.صغر من المضخات ا.(ج) حجمها ا
(f) For a given discharge, it has a ليذل يمكين صينعها, تعطي نفيس التصيريف
smaller size compared to other و. مغلقيية بحييي يمكيين مرهييا ييي السييائل
types. Thus, it can be مُال ذل المضخات المستعملة لض الموائيع
( حيLPG) المبردة كالغاز النفطي المسيل
manufactured as a submersible
يستلزم مر المضخة ي داخل الخزان اليذي
pump. A good example is the
يسحب المائع المبرد منه
pumping of refrigerated liquefied
(ح) امكان اسيتخدامها لضي سيوائل تحتيوي ميواد
petroleum gas (LPG) from a
صلبة القة (خليط سائل و صدلب) مُيل ميياه
storage tank
المجاري
(g) The pump can be used to pump
slurries and it is widely used to
pump sewage waste
To avoid the onset of vibrations, the centrifugal تُبت مضخة الطرد المركزي لخ قا دة مستوية من الخرسيانة
pump is fixed on a flat concrete foundation and ويقتضي االمر نصب المضخة, لمنع نشوء االهمزازا الضار
it is carefully aligned with the motor. . و محركها لخ استقامة واحدة
431
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
It is common to install two pumps in parallel, وتنصب احيانيا ض مضيختان احيدهما تشيتغل والُانيية معطلية ولكين
one operating and the other is a standby. مصانة وجاهزة للعمل .تدار احيدهما بمحير كهربيائي بينميا
Normally, one is attached to an electric motor, تعمل ا.خير بمحدرك االحمدراق الدداخلي ,ويعيود السيبب اليخ
whilst the other is operated by an internal تال ييي الضييرر النيياجم ميين انقطيياع الض ي ,يياذا انقطييع التيييار
combustion engine. The standby pump will الكهربائي بد ت المضخة الُانيية بالعميل تلقائييا د .و ينصيب يدد
start operating automatically to avoid damage ميين المضييخات ييي منظوميية الضي للييتحكم بالضييغط والجريييان
when the electric power is interrupted. In order وكذل لعزل احد المضختين ندما تقتضي الضرورة .والبيد
to control the flow and pressure, and to isolate
من وجود مصفي ي انبوب السحب لمنع دخول المواد العالقة
,وكييذل تشييمل منضييومة الض ي ييي المصييانع ييدداد ميين الت
one of the pumps, a number of pumps are
القياس مُل مقاييس معدل الجريان والضيغط ودرجية الحيرارة .
typically included in the pumping unit system. و يما يخص المضخة لسحب السائل مين موقيع مينخفض ,ميُالد
A strainer must be installed in the suction line
سحب الماء من البئير ,يا.مر يتطليب نصيب مصيفي وصيمام
to catch the suspended particles. The pumping يرمرجييع ييي بداييية انبييوب السييحب يسييمخ الص دمام السددفل ,
unit also includes instruments to monitor flow, انظر الشكل 2.12
pressure and temperature. For pumping liquids
from a low level, a strainer and a non-return
foot valve must be installed at the inlet of the
suction pipe, see fig 8.12.
المضخة
Foot valve Pump
Strainer
Fig 8.12 Low level pumping unit الشكل 8.88مضخة لسحب السائل من موقع منخفض
Prior to operation, the pump must be primed وقبل البدء بتشيغيل يجيب مليإه بالسيائل خيالل صدمام السدقي ُيم
through the priming valve, and then ensure التيكد من دم تسربه من منفذ ما .و ي حالة اشتغال المحر و
that the liquid does not leak out. In the ييدم بييدء المضييخة بييد ع السييائل يياالمر قييد يسييتلزم سييد صييمام
situation where the motor is running and the التصييريف قليييال ض ,و بييذل يتغييير موقييع نقطيية التشييغيل لييخ
pump is not delivering, the discharge valve is المنحنيات المميزة .
closed for a short time.
432
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
This action will shift the duty point of the و هذا بدوره ييإدي اليخ القضياء ليخ ظياهرة تبخير السيائل يي
characteristic curves, thus preventing the onset واذا تركييت.انبييوب السييحب ممييا يسييا د لييخ تشييغيل المضييخة
of vaporization and getting the pump to start. If المضيييخة بيييدون تشيييغيل لفتيييرة طويلييية سييييظهر الصددددأ ليييخ
the pump is not operated for a long time, rust واحيانيا د تتجميع بعيض. اجزائها مميا يعرقيل تشيغيلها ميرة ُانيية
will appear on its parts, inducing startup و نيد اختييار. االوساخ حول الد ا ة المروحية تمنيع دورانهيا
problems. The accumulation of dirt around the وهيي, مضخة معينة تحدد نقطة التشغيل من منحناتيها الممييزة
impeller is another cause for malfunction. If a النقطييية التيييي تشيييتغل نيييدها المضيييخة با ضيييل كفييياءة للعميييل
واذا تغير موقيع نقطية التشيغيل بحيي يصيبح العميود.المطلوب
pump is selected for a certain system, the duty
نيدها تتوقيف, الكلي ي منظومية الجرييان يفيوع قيدرة الضي
point is specified from the characteristic curves.
. المضخة ن الض
At this point the pump will operate most
efficiently. However, the pump will discontinue
operation if a shift in the duty point creates a
total head that supersedes the pumping power.
433
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Note how the valves open on the two sides of ويالحيييظ كييييف تنفيييتح الصيييمامات ليييخ جهتيييي المكيييبس حيييي
the piston causing the suction of the liquid on ينسحب السائل لخ جانب بينما يند ع بضيغط يال يي الجانيب
one side and a high-pressure discharge on the الُييياني ,و نيييدما تييينعكس حركييية المكيييبس ينسيييد الصيييمامان
other. Changing the direction of the piston المفتوحان وينفتح الصمامان اآلخران تنعكس مليية السيحب و
movement will reverse the process. A motor, الد ع تبعا د .ويمكن اسيتخدام محير بخياري او محير احتيراع
steam engine or internal combustion engine can داخلي او محر كهربائي لتشغيل المضخة .
be used to drive the pump.
The piston pump delivers high pressures with a و توليييد المضيييخة ذات المكيييبس ضيييغطا د الييييا د ,بينميييا يكيييون
pulsating discharge due to the reciprocating المصريف مملبلب بسبب الحركة الترددية للمكبس .
motion of the piston.
434
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Some of the disadvantages of this pump are the ومن مساوئ المضخة ايضا ض وجود الصمامات المعرضة للعطيل
presence of valves which are subject to . وكبر حجمها مقارنة بمضخة الطرد المركزي
malfunction, and also its large size compared to
the centrifugal pumps.
Dosing pumps are small piston pumps driven by مضخا المعايرة هي مضخات مكبسيية صيغيرة الحجيم تشيتغل
an electric motor at constant speed. They are و تستخدم لض كميات صغيرة. بمحر كهربائي بسر ة ُابتة
used to pump small liquid quantities at a high ي السائل بضغط ال وبمعدل جرييان ُابيت مُيل حقين كمييات
pressure and at a steady flow rate. They are . محسوبة من المواد الكيميائية ي منظومة الجريان
particularly used to inject a measured quantity
of chemical additives to the flow system.
Discharge التصريف
Diaphragm الرع
Driving mechanism لية التدوير
Suction السحب
Fig 8.14 Diaphragm pump المضخة ذات الرع8.88 الشكل
435
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Gear مسنن
Suction السحب
Discharge التصريف
Gear مسنن
436
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
)(4
)(3
)(2
437
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Liquid سائل
Compressed air
هواء مضغوط
In what follows, we will cover some of the . سنذكر بعض معدات ض الغازات ي الفقرات القادمة
common gas moving equipment.
438
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Fans are frequently used to push cooling air تسيييتخدم الميييراوح كُييييراد ليييد ع هيييواء التبرييييد بييير المبدددادال
across air cooled heat exchangers in industry وقيد, الحرارية الهوائية يي المصيانع و يي التهويية والتكيييف
and in ventilation and air conditioning systems. ويتغييير مقييدار كُا يية الغيياز. %50 تصييل كفائتهييا ىلييخ حييوالي
The efficiency of the fan may approach 70%. واذا اهمييل هييذا التغييير سيييمكن,قليييالد اُنيياء مييروره بالمروحيية
The density changes of the flowing air are تطبيييع قييوانين المييائع يراالنضييغاطي لييخ منظوميية الجريييان
relatively small. Ignoring the density change will التي تشتمل لخ مروحة باستخدام متوسط الكُا ية بيين ضيغطي
make it possible to apply the laws and . السحب والد ع
relationships for an incompressible fluid. The
average density between suction and discharge
is used.
المروحة8.88 الشكل
Fig 8.18 a Fan
8.8.2 Blowers
النافخا8.8.8
Blowers deliver higher pressures compared to
fans, but lower values than compressors. The تمنح النا خات د عا د بضغط يفوع ضغط المراوح ولكن قل من
pressure ration (P1/P2) may increase up to 4 and ليذل4 ( ىلخP1/P2) الضا طات قد تصل نسبة الضغط حيانا د
the temperature of the compressed gas will rise ويعتمييد مقييدار ارتفيياع. ترتفييع درجيية حييرارة الغيياز المضييغوط
as a result. The magnitude of the temperature ولكنه ال يصيل ىليخ, درجة الحرارة لخ نوع ملية االنضغاط
, المقييدار الييذي يييإُر ييي مييل النييا مهمييا يكيين نييوع العملييية
rise depends on the type of compression and
: ويوجد نو ان من النا خات هما
the operation of the blower will not be affected
regardless of the compression process. There
are two types of blowers, these are:
439
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
handle gases. The blower can deliver pressures بينميا يوليد النيا. 1 atm و0.4 atm بضغط يتراوح بين
between 0.4 atm and 1 atm, whilst the two حيييد نيييواع هيييذه2.19 ويبيييين الشيييكل, 2 at ذو الميييرحلتين
stage blower will deliver up to 2 atm. One type وتخضييع مضددخة نددا هددايمور التييي تسييمخ يض يا د. النا خييات
of these devices is shown in Fig 8.19. The Nash و تمتياز بوجيود. بالمضخة لا حلقدة السدائل ىليخ هيذا النيوع
Hytor pump, or liquid ring pump is actually an حلقيية ميين السييائل تييدور مييع الد ا يية المروحييية و تعمييل كمييانع
example of this category. The blower is . 2.20 نظر الشكل, للتسرب
characterized by the inclusion of a liquid ring
which rotates with the impeller and acts a seal,
see Fig 8.20.
440
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The outer shape of a turbo blower is similar to يشبه النا التوربيتي مضخة الطرد المركزي ي المظهر حي
that of a centrifugal pump. The casing is بد ا ية مروحيية كبييرة القطير, يتيلف من الف نحييف نسيبيا د
relatively thinner and the impeller has a larger , تدور هيذه الد ا ية بسير ة اليية, 2.21 كما مبين ي الشكل
diameter, as shown in Fig 8.21. The impeller اذ قيييد تصيييل ىليييخ شيييرة ضيييعاف سييير ة الد ا ييية المروحيييية
rotates at such a high velocity that it may reach وتكون قوة الطرد المركزي الناجمية. لمضخة الطرد المركزي
10 times the velocity of the pump impeller. The ليذا يسيتخدم, ن اليدوران صيغيرة المقيدار لضيآلة كُا ية الغياز
centrifugal force arising from the rotation is . نافخ ممعدد المراحل لتوليد ضغوط الية
rather small due to the low density of the gas,
thus a multistage blower is required to
generate high pressures.
Discharge
الدفاةةImpeller
مود التدويرShaft
Gas inlet
Multistage centrifugal compressors are used to تستخدم هذه الضا طات لتوليد كمييات كبييرة مين الغياز بضيغط
deliver large quantities of gas at high pressure, وهييي ييادة متعييددة المراحييل كمييا هييو مبييين ييي الشييكل, ييال
see Fig 8.22. . 2.22
441
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Compressors are used extensively in the وتستعمل كُيراد ي تصنيع اللداز الطبيعدي و اللداز المصداحب
processing of natural gas and petroleum و تضيغطه140 m3/s وقد تد ع الغاز بمعدل جرييان. للنفط
associated gas. Pressures up to 5.6 MPa and لميا د ان الضييا طات الحديُيية تولييد ضييغوطا د5.6 MPa ىلييخ
discharge of 140 m3/s can be generated by . 70 MPa تصل ىلخ زهاء
compressors. Moreover, new equipment can
deliver pressures up to 70 MPa.
The construction and operation of a يشبه الضا ط الترددي المضخة ذات المكبس من حي العمل و
reciprocating compressor are similar to those of وال. ىال ن وسييائل منييع التسييرب تكييون ادع احكاميا د, التركييب
the piston pump. However, the sealing rings of يتغير حجم السائل ُناء مليية ر يع ضيغطه يي المضيخة بينميا
the machine are carefully and precisely و. ينقص حجم الغاز نيد ازديياد ضيغطه ليذا يبيذل شيغل لييه
assembled. The pumping of a liquid does not ترتفييع درجيية حييرارة الغيياز ُنيياء انضييغاطه لييذا يسييتلزم تبريييد
ويسيتخدم ضيا ط متكيون مين. حيوال.الضا ط ي كُير من ا
affect the volume, whilst, the compression of a
حي يبرد, كُر من مرحلة واحدة للحصول لخ ضغوط ائقة
gas results in a reduction in volume and a rise in
. 2.23 نظر الشكل, الغاز ما بين المراحل
temperature. Work is done on the gas and the
compressor requires cooling. A multistage
compressor is used to achieve very high
pressures; cooling is accomplished between the
stages, see Fig 8.23.
442
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Fig 8.23 Gas intercooling تبريد الغاز بين مرحلتي الضا ط8.88 الشكل
The gas moves into the first stage at pressure P1 ودرجيةP1 ولخ بضغط.يدخل الغاز ىلخ اسطوانة المرحلة ا
and temperature T1. It is compressed to P2 with T2 و ترتفيع درجية حرارتيه ىلييخP2 يضيغط ىليخT1 حيرارة
the temperature rising to T2. The gas is then ُيم يميير الغياز ييي المبييرد اليذي يعيييده ىلييخ نفيس درجيية حرارتييه
cooled in the cooler to T1. Afterwards, the gas is يي سيطوانة المرحليةP3 وبعد ذلي يضيغط ىليخ, T1 ولخ.ا
compressed to P3, in the smaller stage 2, where ويتبييع نضييغاط, ولييخ.الُانييية التييي تكييون صييغر حجم يا د ميين ا
its temperature rises to T3. The compression of واذا ا ترضينا, ( اذا د ازاد مُاليا دP v = R T) الغاز المعادلة
the gas, if assumed ideal, will follow the law ملية االنضيغاط تيتم بُبيوت االنتروبيي ( ايسينتروبي ) ييمكن
(P v = R T). If the compression process is : يضا د تطبيع المعادلة
considered isentropic, the gas will follow:
P vϒ = C (Eqn. 4.44)
Combining equations (4.44) and (4.18) and : واتمام التكامل نحصل لخP و بالتعويض ن
integrating:
w= (8.28)
443
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The total work for compressing m kg of the gas : من الغاز يصبح الشغل الكليm kg اذا ضغط
will be:
WT = w.m = m
WT = m (8.29)
او
or
WT = mR (8.30)
WT = P 1V 1 [ ( )(ϒ-1)/ϒ - 1] (8.31)
For a two stage compressor, the total work will : واذا كان الضا ط متكونا د من مرحلتين يصبح الشغل الكلي
be:
444
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
If the pressure ratio (P2/P1) = (P3/P2), we obtain: (P3/P2) ( تساويP2/P1) و اذا كانت نسبة الضغط
: نحصل لخ
WT = P 1V 1 [ ( )(ϒ-1)/ϒ - 1] (8.33)
We have ون
(P2/P1) = (P3/P2)
P2 = √ (8.34)
If it is required to estimate the total work in اذا كان المطلوب ايجاد الشغل الكلي بداللية نسيبة ضيغط الغياز
terms of the gas compression ratio (P3/P1), the : ( ستصبح المعادلةP3/P1) الخارج ىلخ الداخل
equation will be:
WT = P 1V 1 [ ( )(ϒ-1)/2ϒ - 1] (8.35)
Equation (8.35) can be generalized for ي ييدد ميين المراحييل و ذل ي. (2.35) ويمكيين تعميييم المعادليية
multistage compressors by substituting the بضيغط الغياز الخيارجP3 بعددالمراحل و ن2 بالتعويض ن
number of stages for 2, and the pressure of the . من خر مرحلة
last stage for P3.
445
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The gas enters the first stage at 200 K and if the وان200 K ول بدرجة حرارة.لما د بين الغاز يدخل المرحلة ا
mechanical efficiency of the compressor is 0.85. وكيييذل احسيييب درجييية. 0.85 الكفييياءة الميكانيكيييية للضيييا ط
Also, calculate the temperature of the gas ولييخ وا تييرض ان نسييبة.حييرارة الغيياز الخييارج ميين المرحليية ا
leaving the first stage assuming that the . الضغط متساوية ي المرحلتين
compression ratio is the same in both stages.
Solution الحل
Given: : المعلوم
We calculate the total work using equation (2.35) نحسب الشغل الكلي من المعادلة
(8.35)
Note that all variables are known except V1 اليذي نحسييبهV1 و يالحيظ ان جمييع المتغييرات معلومية سيو
which is determined as follows: : من
P1 V1 = m R T
P1 V1 = R0 T
446
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The actual work is WT multiplied by the : مضروبا د بالكفاءة ايWT والشغل الحقيقي يساوي
efficiency:
We then calculate the temperature using: : ُم نحسب درجة الحرارة من
P1 V1ϒ = P2 V2ϒ
=( )(ϒ-1)/ϒ
The pressure ratio is the same in the two : اذن, والمعلوم ان نسبة الضغط متساوية ي المرحلتين
stages, thus:
P2/P1 = P3/P2
P2 = 3.6 x 104 Pa
=( )(1.4-1)/1.4
T2 = 277.84 K
This is the temperature of the gas exiting the وليخ و قبيل.و هي درجة حيرارة الغياز الخيارج مين المرحلية ا
first stage before passing through the cooler. . مروره بالمبرد
447
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
448
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
The high-pressure steam enters the steam chest يدخل بخيار المياء اليخ جيزء البخيار بسير ة منخفضية ُيم يتميدد
at low velocity and expands through the ويإدي التمدد الخ انخفاض ي الضغط. ند مروره ي المنف
converging-diverging nozzle. This results in a ينسييحب الغيياز يخييتلط مييع البخارحي ي. وازدييياد ييي السيير ة
decrease in pressure and an increase in velocity. يرتفيع ضيغط الخلييط يي الجيزء. ينيد ع يي االنبيوب الناشير
Meanwhile, the suction gas enters at the المنفرج من االنبوب الناشر وتنخفض السير ة ييه ىليخ صيوتية
suction inlet. The steam, which is now at a high , و دون صوتية نتيجة تحول الطاقة الحركية ىليخ طاقية ضيغط
velocity, entrains the suction gas and combines يمكين. يند ع الخليط ىلخ الخيارج حيي يسيود الضيغط الجيوي
. استخدام اكُر مين قياذف للحصيول ليخ ضيغط يراغ واطيئ
with it. The mixture then passes through the
ويعطيخ13.5 kPa مُالد يولد قاذف واحد ضغطا د مطلقا د قدره
diffuser. In the diverging section, the mixed
بينما يمكن الحصول لخ راغ3.5 kPa قاذف ذو مرحلتين
fluid expands; its velocity is reduced to the
. باستخدام ُال مراحل0.67 kPa و2.7 kPa يتراوح بين
sonic or subsonic value. However, the pressure
ويمتاز قاذف بخار الماء بخليوه مين اجيزاء متحركية مميا يجعيل
is increased due to the conversion of kinetic
صيييانته امييراد ييير ضييروري لييذا يكُيير اسييتعماله ييي المجيياالت
energy back into pressure energy. The mixture
.الصنا ي
is then discharged to the surroundings at
atmospheric pressure. More than one ejector
can be employed to produce low vacuum
pressure. For example, a single ejector can
create 13.5 kPa of absolute pressure, whilst the
two-stage ejector will develop a vacuum of
3.5 kPa; the three-stage will attain pressures
ranging from 2.7 kPa to 0.67 kPa. The steam
ejector requires no maintenance because it has
no moving parts; hence it is used extensively in
industry.
449
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
g = 9.81 m/s2
8.11 Problems المسائل8.8
احسييب القييدرة الييالزم تزويييدها لمضييخة لييد ع حييامض8.1
8.1 Determine the power supply to a pump
1.5 km و طوله55 mm الكبريتي ي انبوب قطره الداخلي
used to transport sulphuric acid in a pipe line.
وان0.56 لم يا د ان كفيياءة المضييخة, 2.8 kg/s بمعييدل
The internal diameter of the pipe is 55 mm and
1650 وكُا ية الحيامض0.046 mm نبيوب.خشونة سطح ا
the length is 1.5 km. The pumping rate is 2.8
. 8.6 x 10-3 Ns/m2 و لزوجتهkg/m3
kg/s, the efficiency of the pump is 0.56, and the
roughness of the pipe surface is 0.046 mm. The
density of the acid is 1650 kg/m3 and the
viscosity 8.6 x 10-3 Ns/m2.
8.2 Benzene is pumped, at a rate of 2.525 x 10-3 مين مسيتودع2.525 x 10-3 m3/s يض البنزين بمعيدل8.2
m3/s, from a feed tank at atmospheric pressure, . 1.83 m يقيع تحيت تييُير الضيغط الجيوي ىليخ ارتفياع قيدره
to another vessel, 1.83 m high. The pump is ن مستودع البنزين و كان1.32 m اذا كانت المضخة تعلو
1.32 m above the feed vessel and the discharge ومقييدار هبييوط الضييغط يييه4 cm قطيير نبييوب التصييريف
line diameter is 4 cm. If the pressure drop in the كمييا يشييير مقييياس الضييغط المُبييت ييي, 37.9 kPa يسيياوي
discharge line is 37.9 kPa and the pressure : احسب, 345 kPa نهايته ىلخ ضغط مقداره
gauge at its end reads 345 kPa, compute:
Given:
: لما د ان
The pressure drop in the suction line is 3.45
و كفياءة3.45 kPa مقدار هبوط الضيغط يي نبيوب السيحب
kPa, the efficiency of the pump is 0.6, the
وضييغط بخيياره865 kg/m3 وكُا يية البنييزين0.6 المضييخة
density of the Benzene is 865 kg/m3 and its
. 26.2 kPa
vapor pressure is 26.2 kpa.
Ans ج
8.3 Water is pumped at a rate of 6 x 10-4 m3/s in ي انبوب قطره6 x 10-4 m3/s يض الماء بمعدل8.3
a horizontal pipe of 0.04 m diameter and 104 m ُم يرتفع150 m ممتد ا قيا د لمسا ة0.04 m
451
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
150 m length. The pipe rises 104 m to a storage اذا كان الماء يمر بمبادل حراري قبل دخوله. ىلخ خزان معين
vessel. The water passes through a heat , 150.15 kPa وكان هبوط الضغط ي المبادل, ي الخزان
exchanger before the vessel. If the pressure :احسب القدرة الالزم تزويدها للمضخة لما ان
drop in the exchanger is 150.15 kPa, calculate
the power supply to the pump. Given:
Roughness of the pipe surface = 0.00026 m 0.00026 m = خشونة سطح االنبوب
Efficiency of the pump = 0.65 0.65 = و كفاءة المضخة
Density of water = 103 kg/m3 103 kg/m3 = كُا ة الماء
Viscosity = 10-3 Ns/m2 10-3 Ns/m2 = لزوجته
8.4 The characteristic data of a centrifugal نييدرج ييي ادنيياه معلومييات تخييص مميييزات مضييخة طييرد8.4
pump are tabulated as follows: : مركزي معينة
If a pump is used to lift water from one vessel اذا استخدمت هذه المضخة لر ع الماء مين مسيتودع ىليخ خير
to another through a pipe of diameter 0.15 m و كيان يرع. 0.15 m و قطيره800 m خالل انبوب طوله
and length 800 m. The difference in water level جييد معييدل, 8 m االرتفيياع بييين مسييتو الميياء ييي الخييزانين
in the two vessels is 8 m. Compute the flow rate , الجرييييان يييي المنظومييية والقيييدرة اليييالزم تزوييييدها للمضيييخة
in the system and determine the power supply 0.004 تساويf ا ترض قيمة معامل احتكا انن
to the pump. Assume f = 0.004.
Ans ج
60 m3/h, 3.14 kW
452
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
8.5 In a flow system, two centrifugal pumps ربطت مضختا طيرد مركيزي ةلد المدوالي يي منظومية8.5
were connected in series. Use the tabulated ارسيييم منحنييييات تمُيييل العميييود الكليييي ضيييد, جرييييان معينييية
data to plot the curves depicting the total head التصريف للمضختين والمنظومة مستنداد ىلخ المعلومات المدونة
vs. the discharge for the two pumps and for the : ُم ين نقطة التشغيل للحاالت اآلتية
system. Determine the duty point for:
(a) Only pump (1) is running ( تشتغل قط1) ( ) المضخة رقم
(b) Only pump (2) is running ( تشتغل قط2) (ب) المضخة رقم
(c) Both pumps are running (ت) المضختان تشتغالن
:المعلومات
Data:
)1( المضخة
)2( المضخة
منظومة الجريان
8.6 The diameter of a centrifugal pump impeller يبل قطر الد ا ة المروحية لمضخة طرد مركزي8.6
is 0.02 m. If the pump is used to transport ييياذا اسيييتعملت هيييذه المضيييخة لضييي المييياء حسيييب. 0.02 m
water, and the following information was : المعلومات االتية التي سجلت ند ا ضل كفاءة للتشغيل
recorded at the optimum efficiency:
Speed of impeller = 58.3 rev/s ) ( دورة بالُانية58.3 rev/s = سر ة الد ا ة المروحية
Discharge = 0.012 m3/s 0.012 m3/s = التصريف
Total head = 70 m 70 m = العمود الكلي
Power = 12 kW 12 kW = القدرة
453
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
Compute the performance data of a similar احسييب معلوميييات تخييص اداء مضيييخة مماُليية لالوليييخ تشيييتغل
pump running at half the speed of the first one. لميا د ن قطيير الد ا يية, ولييخ.بسيير ة دوران تسيياوي نصييف ا
However, the diameter of the impeller is twice . ولخ.المروحية لها يساوي ضعف قطر الد ا ة للمضخة ا
the diameter of the first pump.
Ans ج
8.7 A centrifugal fan draws gas, at a rate of تسييحب مروحيية طييرد مركييزي ييازاد ميين حجييرة يسييودها8.7
6 kg/s, from an enclosure at a pressure of ُييم تد عييه6 kg/s بمعييدل400 mm Hg ضييغط مقييداره
400 mm Hg. The gas is delivered at 765 mm Hg ياذا كانيت. 46.85 m/s وبسير ة765 mm Hg بضيغط
and at a speed of 46.85 m/s. If the efficiency of احسب, 1.027 kg/m3 وكُا ة الغاز0.65 كفاءة المروحة
the fan is 0.65 and the density of the gas is القدرة الالزم تزويدها للمروحة مفترضا د ُبوت كُا ة الغاز اُنياء
1.027 kg/m3, estimate the power supply to the . واهمال تيُير االحتكا ي المنظومة, الجريان
fan, assuming constant density of the gas and
ignoring friction losses in the system.
8.8 Air at 290 K is compressed from 101.3 kPa 101.3 مين290 K يضيغط الهيواء بدرجيية حيرارة8.8
to 2 MPa in a two stage reciprocating ي ضا ط ترددي ذي مرحلتين كفاءتيه2 MPa الخkPa
compressor. The mechanical efficiency of the يياذا كييان انضييغاط الغيياز يتبييع القييانون. 0.25 الميكانيكييية
compressor is 0.85 and the compression is ( وان نسييبة االنضييغاط متسيياوية ييي المييرحلتينPV1.2 = C)
according to (PV1.2 =C). If the pressure ratio is . احسب الشغل الالزم لضغط كيلو رام واحد من الهواء
the same in the two stages, calculate the work
required to compress 1 kg of air.
3
22.4 m3/kmol الحجم المولي
Molar volume= 22.4 m /kmol
Molecular weight = 29 kg/kmol 29 kg/kmol الوزن الجزيئي
Ans ج
340 kJ/kg
454
PUMPING EQUIPMENT 8 اجهزة ضخ الموائع
8.9.1 Use Excel to solve problems 8.4 and 8.5 2.5 و2.4 استخدم برنامع االكسل لحل المسئلتين8.8.8
8.9.2 Write an essay about the different types لخ االنواع التيي ليم اكتب ن انواع المضخات مركز8.8.8
of pumps. Focus on the types that are not نتطرع لها
mentioned in this chapter
8.9.3 Conduct a short research about cavitation اجيييري بحُيييا يخيييص ظييياهرة التجيييوف يييي المنشيييئات8.8.8
in the oil industry البترولية
8.9.4 Describe the pumping methods of the الميواد, المياء: اكتب ن طرائع ض المواد االتية8.9.4
following materials: water, light petrol , خلييييط الكونكرييييت, الحيييوامض المركيييزة,النفطيييية الخفيفييية
products, concentrated acids, concrete mix, and مخلفات المجاري
sewage waste
8.9.5 Compressed air is used extensively in يستخدم الهواء المضغوط ي العديد من المجاالت8.8.8
industry, how is it compressed? What are the كيف يضغط الهواء؟ ما هي اهم استخداماته ؟. الصنا ية
common uses of compressed air?
8.9.6 Explain the process of compressing اكتب ن ملية ضغط الغازات النفطية مع شرح8.8.8
petroleum gases and describe the compressors مفصل للضا طات المستخدمة
used in detail
455
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Explain the importance of packed beds or شررررررب الابقرررررة المسرررررام ة اهم تهرررررا ررررري.1
porous layers in industry المصانع
2. Understand Darcy’s law and develop relevant هم اشتقاق معادلة دارسي.2
equations
3. Derive the Kozeny equation اشتقاق معادلة ك زني.3
4. Develop relationships for streamline and اشتقاق معادالت تخص الجر ران االنسر ابي.4
turbulent flow through packed beds and solve الجر رررران االبررررارابي خرررر ل الابقررررات
relevant problems المسام ة مع حل المسائل ذات الع قة
ادراك اهم رة تررا ر الجردران لىررل الجر رران.5
5. Understand the wall effect on flow through
خ ل الابقات المسام ة
packed beds
456
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
There is also absorption packed towers, where ح ث تم لمى ة,هنالك ا با أبراج االمتصاص المحشوة
the gas is absorbed by a counter current liquid امتصاص الغازات ها باند اع الغاز خ ل حش ة من
flowing through the packing. The porous layer تعمل الابقة, الجس مات الصىبة باتجاه معاكس لجر ان السائل
increases the surface area of contact between المسام ة هنا لىل ز ادة المساحة الساح ة منح الغاز السائل
the liquid and the gas and hence allows more تستخدم االبراج المحش ة ا با ً ي. قتا ً كا ا ً لألمتصاص
time for absorption. The packed towers are also لمى ات صنال ة اخرى م ل التقطير التجفيف ابا ة إلل
used for industrial distillation and drying. عد الترشيح لمى ة صنال ة اخرى تشتمل لىل, االمتصاص
Filtration is another industrial process where a مر ر السائل خ ل الابقة المسام ة الصىبة المترسبة ي سا
liquid flows through a porous layer formed at . لترش ح
the filtration medium.
In this chapter, we will cover the methods of نبحث ي هذا الفصل ارائق تخم ن هب ا البغا لبر
estimating pressure drop across porous layers. الابقات المسام ة التي تسالد لىل تصم م بعض المعدات
This will help in designing some of the industrial . الصنال ة
equipment.
Darcy conducted some experiments in 1830 باجراء تجارب تخص جر ان1331 قام العالم دارسي ي لام
about the flow of water through layers of sand قد تب ن ان مت سا, الماء خ ل ابقات رمى ة مختىفة السمك
with different thicknesses. He found that the تتناسب, سرلة الجر ان ̅ المق سة لبر ساح الابقة باكمىها
average velocity across the surface ̅ is directly أيl ( لكسا ً مع سمك الابقة-∆P) ارداً مع رق البغا
proportional to the pressure drop (-∆P) and : أن
inversely to the layer thickness l, that is:
457
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
̅=K (9.1)
K is a constant whose value depends on the ه ابت تعتمد ق مته لىل الخ اص الف ز ائ ة لابقةK
physical properties of the solid particles layer . الجس مات الصىبة لىل خ اص المائع
and on the properties of the fluid.
: تعال السرلة من
The velocity is determined as follows:
̅= (9.2)
V is the volume of the fluid passing through t ه حجم المائع الذي مر ي زمن قدرهV
time t
A is the cross section area of the layer هي مساحة المقاع العربي لىابقةA
The linear relationship between the velocity تشرر ر الع قررة الخا ررة برر ن السرررلة رررق البررغا إلررل ان
and pressure drop indicates that the flow هرذا امرر مت قرع, الجر ان خر ل الابقرة هر جرياان انسايابي
through the layer is streamline. This is الن المائع جري خ ل ممرات ب قة ي الابقرة المسرام ة ممرا
expected, because the fluid passes through نظراً لصغر المسرامات. ً جعل مقدار رقم ر ن لدز منخفبا
narrow channels which make the value of انخفاض سرلة الجر ان تنشأ مقا مة الجر ان نت جة قوى الجر
Reynolds number low. Furthermore, the small بداللررةK مكننررا كتابررة ال ابررت, µ المرتباررة بىز جررة المررائع
size of the pores and the low velocity give rise الررذي سررملB الىز جررة ابررت يخررر خررص الابقررة المسررام ة
to a flow-resistance; this is caused by the drag : النفاذية بالص غة اآلت ة
forces related to viscosity µ. The constant K can
be expressed in terms of viscosity and another
constant B linked to the porous layer, known as
permeability, as follows:
K= (9.3)
Substituting in equation (9.1) we obtain Darcy’s : ( نحصل لىل قان ن دارسي9.1) بالتع ض ي المعادلة
law:
̅= (9.4)
458
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
The permeability value indicates the ease of تعاي ق مة النفاذ ة كرة لرن مردى سره لة مرر ر المرائع خر ل
fluid flow through the porous layer. It is worth تجدر م حظة ان النفاذ ة تستخدم ي دراسة, الابقة المسام ة
noting that the permeability is employed to the . الجر ان االنس ابي قا
study of the streamline flow only.
The characteristics of the porous layer can be مكرررن تعررر ن خصرررائص الابقرررة المسرررام ة بتعاااين المساااامية
determined by the values of the porosity and بنسبة حجم المساماتɛ تعرف المسام ة. المساحة النوعية
the specific surface. Porosity ɛ is defined as the . VB إلل حجم الابقة بأكمىهاVp ا الفراغات ي الابقة
ratio of the volume of pores or voids Vp to the
total volume of the bed VB
ɛ= (9.5)
SB = (9.6)
As is the surface area available for the fluid flow هي المساحة الساح ة المتاحة لىجر انAs
The specific area for the solid particles S is بنسرربة المسرراحةS تعررف المسرراحة الن ل رة لىرردقائق الصرىبة
defined as the surface area of the particle مرر ً لدق قرررة كر رررة, السرراح ة لىدق قرررة الصررىبة إلرررل حجمهرررا
divided by its volume, for example for a : dp قارها
spherical particle with diameter dp:
S= = (9.7)
459
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
The following equation provides a relationship : بالمعادلة اآلت ةS , SB , ɛ تتم ل الع قة ب ن
among S, SB and ɛ:
ɛ = S (1 - ɛ) (9.8)
Table 9.1 provides some characteristics of . خصائص الابقات المسام ة لبعض الم اد9.1 بب ن الجد ل
packed beds for some common materials
Table 9.1 Characteristics of packed beds خصائص الابقات المسام ة9.9 الجدول
460
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
( )
̅= (Eq. 5.43)
If we assume that the voids of the porous layer اذا ا تربنا الفراغات ي الابقة المسام ة هي قن ات متعرجرة
form narrow wavy channels, the flow is جري ها المرائع انسر اب ا ً ر مكن برع معادلرة مما ىرة لمعادلرة
therefore considered streamline, and then we : ب ز ل لىل النح اآلتي-هاكن
can develop an equation similar to that of
Hagen-Poiseuille as follows;
̅ = (9.9)
dm = = (9.10)
( )
It is evident that the length of the channel is مرن ال ابررح ان ار ل القنرراة تناسرب ارررداً مرع سررمك الابقررة
proportional to the depth of the packed bed or : المسام ة اي أن
porous layer, thus:
l1 α l (9.11)
461
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
A relationship for the velocity inside the مكرن ا جرراد ل قرة لىسرررلة رري القنر ات ̅ بداللررة مت سررا
channels ̅ in terms of the average velocity : السرلة خ ل الابقة ̅ كاآلتي
through the layer ̅ can be developed as
follows:
Consider a cube of a packed bed having sides of حجمره هر, χ لنتخذ مكعبا ً من الابقة المسام ة ا ل برىعه
length χ. The volume will be χ3 and the volume ) مسرراحة مقاررع المكعرربɛ χ3( حجررم الفراغررات رره هرχ3
of voids (ɛ χ3). The cross section area of the ب نما مسراحة المقارع العربري المتاحرة لىجر ران هري, χ2 هي
cube is χ2, whilst the cross section area available , ( ɛ χ2 ) حجم الفراغات مقس م لىل ارتفراع المكعرب أي انهرا
for flow will be the volume of voids divided by , ( ̅ χ2) ان معردل الجر ران الحجمري خر ل المكعرب هر
the height of the cube, thus it is (ɛ χ2). The بتقسر مه لىررل مسرراحة مقاررع المسررامات نحصررل لىررل مت سررا
volumetric flow rate is ( ̅ χ2) and dividing by the : السرلة ي القن ات أي أن
cross section area of the voids we get the
average velocity inside the channels, thus:
̅ ̅
̅ = = (9.12)
̅= (9.13)
Substituting SB in terms of S using equation ( نحصرل9.3 ) مرن المعادلرةS بداللرةSB برالتع ض لرن
(9.8), we get: : لىل
̅= (9.14)
( )
(9.13)
K2 is known as Kozeny constant and its value is : أي أن5 ابت ك زني ق مته تسا يK2 سمل ال ابت
5, thus:
̅= (9.15)
( )
462 (9.13)
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
Dividing equation (9.15) by equation (9.4), we : ( نحصل لىل9.4 ) ( لىل المعادلة9.15) بتقس م المعادلة
obtain:
B= (9.16)
( )
Carman conducted some streamline and اجرررررى العااااالر كارمااااان تحىرررر ت لىجر رررران االبررررارابي
turbulent flow analysis for the flow of fluids االنس ابي خ ل الابقات المسرام ة رسرم منحن را ً لررقم ر ن لردز
through packed beds. He plotted curves for بار قرة مما ىرة لتحى رل الجر رانf1 بد معامل االحتكاكRe1
Reynolds number Re1 vs. friction factor f1 in a قرررد لررررف رقرررم ر ن لررردز لىابقرررة المسرررام ة. ررري االناب رررب
: بالمعادلة
similar manner to flow in pipes. He defined
Reynolds number for a packed bed by the
following equation:
̅
= (9.17)
= (9.18)
̅
represents the drag force per unit area, and dm , ̅ نع ض لن, م ل قوة الجر لوحدة المساحة
substituting dm and ̅ from equations (9.10 ( نحصل9.17) ( ي المعادلة9.12 9.11) من المعادلت ن
and 9.12) into equation (9.17), we get: : لىل
̅
= (9.19)
( )
463
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
In the case of steady flow, the drag force will be ي حالة استقرار الجر ان تتسا ى ق ة الجرر بقر ة البرغا اي
equal to the pressure force, thus: : أن
τ1 = (9.21)
( )
= (9.22)
̅ ( ) ̅
Substituting ̅ in terms of ̅ and introducing f1, f1 ادخررال معامررل االحتكرراك ̅ بررالتع ض لررن ̅ بداللررة
we obtain: : نحصل لىل
f1 = (9.23)
( ) ̅
Karman found that the relationship between f1 تتم رل برالمنحنلRe1 f1 قرد جرد كارمران الع قرة بر ن
and Re1 is depicted in Fig 9.1 which follows the : الذي تبع المعادلة9.1 المب ن ي الشكل
equation:
464
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
Note that if the value of Re1 is less than 2, the أصرغر مرنRe1 اذا كانت ق مرة, (9.24) حظ ي المعادلة
term (0.4 Re10.1) in equation (9.24), will be small ( صربح بررئ ل المقردار ر مكن0.4 Re1-0.1) رأن الحرد2
and can be ignored, hence the equation is : اهماله تقترب المعادلة إلل
approximately:
f1 = 5 Re1-1 (9.25)
As Re1 increases from 2 to 100, the second term ترزداد أهم رة الحرد ال راني ري111 الرل2 مرنRe1 بازد اد
of equation (9.24) becomes more effective and بردأ تحر ل الجر ران تردر ج ا ً إلرل جر ران, (9.24) المعادلة
the flow changes gradually to turbulent. Note تجدر م حظرة أن التحر ل الحاصرل ري الجر ران, ابارابي
that the change in flow regime is not uniform . ه غ ر منتظم الخت ف حجم المسامات ي الابقة المسام ة
because of the variation in pore size within the
layer.
465
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
Ergun developed equation (9.26( for the flow of اسررتنت ايركااون المعادلررة ) (9.26الترري تخررص الجر رران خ ر ل
a fluid through a layer made up of Raschig ابقررة متك نررة مررن قاررع أنب ب ررة الشرركل صررغ رة الحجررم تسررمل
rings. The rings are small pieces of pipe used حلقاااات راشاااك ,تسرررتخدم هرررذه القارررع كحشررر ات لىمعررردات
extensively as packing for industrial equipment الصنال ة م ل ابراج التقا ر .
such as distillation towers.
f1
A
B
Re1
If the equation is applied to a layer packed with اذا اسرررتخدمنا المعادلرررة لابقرررة متك نرررة مرررن جسررر مات كر رررة
عرر ض لررن القاررر بالع قررة ) (d = 6/Sتصرربح معادلررة
spherical particles, the diameter should be
ار ك ن :
)substituted by (d = 6/S
( )
= 4.17 + 0.29 )(9.27
̅ ̅
466
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
Combining equations (9.23) and (9.27), we get: : ( نحصل لىل9.27) ( ي المعادلة9.23) بتع ض المعادلة
Fig 9.2 shows curve B plotted using equation (9.28) الذي م ل المعادلةB المنحل9.2 ب ن الشكل
(9.28)
Solution الحل
Given: : المعى م
We first calculate the Reynolds number to : نحسب أ الً رقم ر ن لدز لتع ن اب عة الجر ان
determine the flow regime:
̅
= (Eqn. 9.19)
( )
We now calculate the average velocity, in the نحسب مت سا السرلة ي األنب ب المحش لىل أساس مساحة
packed pipe, based on the cross section area A : كاآلتيA مقاع االنب ب
as follows:
467
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
̅ = Q/A = G/ρ A
We then find the values of the porosity ɛ and المساحة الن ل ة لىجس مة الكر ةɛ م ن جد ق مة المسام ة
the specific area of the spherical particles S : هما9.1 من الجد لS
from table 9.1:
ɛ = 0.405
S = 948 m2/m3
Re1 = = 33.68
( )
Since the calculated Reynolds number is greater لررذا ال مكررن اسررتخدام2 الحاصررل أن رقررم ر ن لرردز أكبررر مررن
than 2, we use Carman equation instead of : معادلة ك زني لحساب هب ا البغا سنابق معادلة كارمان
Kozeny’s:
f1 = (Eqn. 9.23)
( ) ̅
f1 = + = 0.4298
Exercise تمرين
Solve example 9.1 with packing changed to مستبدأل الحش ة بحىقات راشك9.1 ألد حل الم ال
Raschig rings ( l x d = 6.35x 6.35) (l x d = 6.35 x 6.35)
9.6 Structure of the packed bed and العالقاااة باااين ثابااات كاااوزني وبنياااة الطبقاااة9.9
the Kozeny constant السامية
Equation (9.14) shows that the value of Kozeny نابرقK2 ( ان ق مرة ابرت كر زني9.14) تبح ري المعادلرة
constant K2 applies to all shapes of particles. لكررن هررذا ل ر س بصررح ح, لىررل أي شرركل كرران مررن الجس ر مات
However, this is not quite true and Carman بن ة الابقة المسرام ةK2 قد أ جد كارمان ل قة ب ن, ً تماما
found a relationship between K2 and the bed : هي
structure, which is:
K2 ( )2 K0 (9.29)
( ) is the fraction of the wavy channel length المقدار ) ( ه نسبة ا ل القناة المتعرجة التي سىكها المائع
that the fluid runs through, to the depth of the ه ابت عتمرد لىرل شركلK0 , إلل سمك الابقة المسام ة
bed. K0 is a constant whose value depends on لىقنرراة دائر ررة2.0 ق مررةK0 تخررذ, المقاررع العربرري لىقنرراة
the shape of the cross section of the channel. تبرح ري المعادلرة. لىقنراة مسرتا ىة المقارع2.65 المقاع
The value of K0 is 2 for a circular cross section لكنره تخرذ ق مرة مقرردارها ( ) رزداد بازد رادK2 ) أن9.29(
and 2.65 for rectangular section. Equation
. ( ) لند ازد ادK0 ي أك ر االح ال بسبب تناقص ق مة5
(9.29) shows that the value of K2 increases with
the increase of ( ) , however, it frequently
takes the value of 5. This is because K0
decreases with the increase of ( ).
9.7 Wall effect in a porous layer تأثير الجدران المحيطة بالطبقة المسامية9.9
The particles located near the wall surrounding تتراص ر ف الجس ر مات قرررب جرردران ال لرراء المح ر ا بهررا بررنما
a porous layer, are packed in a different manner لررذا تصرربح, ختىرف لمررا هر لى رره رري مركررز الابقررة المسررام ة
to those located in the middle part of the bed. مقا مة الجر ان ري ابقرة مسرام ة صرغ رة القارر أقرل مرن تىرك
Consequently, the flow resistance in a small . لنفس معدل الجر ان ي ابقة كب رة القار
diameter layer is less than that for the same
flow through a large diameter layer.
469
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
Coulson found a correction factor fw from the fw قد أجررى كولساون تجرارب اسرتنت منهرا معامال تصاحيح
results of experiments to account for the wall أخذ بع ن االلتبار تأ ر الجدران المح اة بالابقة المسام ة ي
effect: : الجر ان
fw = (1 + )2 (9.30)
Sc is the surface area of the container per unit ه مساحة ال لاء الحرا ي ل حردة حجرم الابقرة المسرام ةSc
volume of the porous layer, hence the Kozeny : بهذا تصبح معادلة ك زني
equation will be:
̅= fw (9.31)
( )
The values of K2 for some layers can be found لربعض الابقرات حسررب ق مرة المسررام ةK2 مكرن ا جراد ق مررة
using Fig 9.3 according to the porosity values. .9.3 باستخدام منحن ات الشكل
5.5
5
2 1
K2
4.5
4 3
3.5
4 5
2.5
0.3 0.35 0.4 0.45 0.5
ɛ
” ” ”
(1 ) cylinders-1/8 , (2) prisms, (3) cubes, (4) cylinders-¼ , (5) plates-1/16
Fig 9.3 Kozeny constant vs. Porosity ابت ك زني بد المسام ة9.3 الشكل
470
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
471
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
9.2 Water flows through a packed bed with a مسراحة20 cm جري الماء خ ل ابقة مسام ة سمكها9.2
depth of 20 cm. If the specific area of the مرا أشرد0.685 مسام تها2450 m2/m3 جس ماتها الن ل ة
particles is 2450 m2/m3 and the porosity of the :سرلة لىجر ان تعال حسب معادلة ك زني
layer is 0.685, calculate the maximum velocity
based on the Kozeny equation, given:
10-3 Ns/m2 = لز جة الماء
Viscosity of water = 10-3 Ns/m2
103 kg/m3 = ك ا ة الماء
Density of water = 103 kg/m3
9.3 Use the information of problem 9.2 to plot ً ارسم منحن ا ً لفرق البغا برد سررلة الجر ران مسرتخدما9.9
the pressure drop vs. velocity and discuss the ناقش شكل المنحنل9.2 المعى مات ي المسألة
shape of the curve.
9.4 Plot curves for the friction factor vs. ارسم منحن ات معامل االحتكاك برد رقرم ر ن لردز لىابقرة9.9
Reynolds number for the porous layer of : ً مستخدما9.2 المسام ة ي المسألة
problem 9.2 using:
(أ) معادلة كارمان
(a) Carman equation
(ب) معادلة ا رك ن
(b) Ergun equation
If a fluid with density 103 kg/m3 and viscosity 10-3 Ns/m2 لز جتره103 kg/m3 راذا جررى سرائل ك ا تره
10-3 Ns/m2 flows through the bed, show that خ ل الابقة برهن لىل أن معادلة ك زني مكن
472
FLOW THROUGH POROUS MEDIA 9 الجريان في االوساط المسامية
the Kozeny equation applies to the system. تاب قهرررا لىرررل المنظ مرررة احسرررب معررردل الجر ررران ب حررردات
Calculate the flow rate in kmol/s for a pressure الر زن104 Pa لىمرا ً أن مقردار هبر ا البرغاkmol/s
drop of 104 Pa. Take the molecular weight for . 18 kg/kmol الجز ئي لىسائل
the liquid to be 18 kg/kmol.
Ans ج
0.994 kmol/s
9.6 A packed tower-chemical reactor, in a جد مفالل ك م رائي ري معمرل انتراج حرامض الكبر ت رك9.9
sulphuric acid production factory, has a محش ب ث ابقات من العامل2.3 m متك ن من برج قاره
diameter of 2.3 m. The reactor consists of 3 اذا كران العامرل المسرالد مك نرا ً مرن حب برات كر رة, المسالد
layers of spherical catalyst particles. The 1.45 m كران سرمك كرل ابقرة9.5 mm قار ال احردة منهرا
diameter of each particle is 9.5 mm, the احسررب مقرردار هب ر ا البررغا رري المفالررل0.35 مسررام تها
thickness of each layer is 0.45 m and the لىما ً أن. 0.6 kg/m2s ا ناء مر ر الغاز بسرلة كتى ة قدرها
porosity of the layer is 0.35. Compute the
pressure drop in the reactor for a gas passing at
a mass velocity of 0.6 kg/m2s, given that the:
Viscosity of the gas = 0.32 x 10-3 Ns/m2 0.32 x 10-3 Ns/m2 = لز جة الغاز
Density of the gas = 0.569 kg/m3 0.569 kg/m3 = ك ا ة الغاز
Ans ج
3.9 kPa
473
PARTICLE MECHANICS 10 ميكانيك الدقائق
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Explain drag forces and solve relevant problems شرح معنى قوى الجر وحل المسائل ذات العالقة .1
2. Understand the fluid flow across spherical and فهمممر جر مممان الموائمممس مبمممر الجسممم مات الكرو مممة .2
cylindrical particles واالسطوان ة الشكل
3. Calculate the terminal falling velocity of solid اجممراء حسممابات لتقممو ر سممرمة السممقوط النهائ ممة .3
particles in a fluid للدقائق الصلبة
4. Apply equations to separate dissimilar solid استخدار المعادالت لفصل دقائق مختلفة الحجر .4
particles
5. Use the Galileo number to determine the type of تع م ن نم مط الجر ممان مبممر الممدقائق باسممتخدار رقممر .5
flow across particles غال ل و
6. Understand settling of non-spherical particles and فهمر اماهرت ترسم ل المدقائق غ مر الكرو مة وحمل .6
solve associated problems المسائل ذات العالقة
7. Explain accelerated fall of particles شرح ممل ة هبوط الدقائق المعجل .7
8. Explain centrifugal separation and solve relevant شممرح طر قممة فصممل الممدقائق بممالطرد المركمم .8
problems وحل المسائل ذات العالقة
9. Appreciate the theory of fluidisation and solve ادراك نار ة التم س وحل المسائل ذات العالقة.9
relevant problems
474
PARTICLE MECHANICS 10 ميكانيك الدقائق
The force acting on a solid particle in the flow طلق ملمى القموت التمي مبثر بهما الممائس فمي جسمر صملل باتجماه
direction is known as the drag force. The solid و ممبثر الصمملل بقمموت مسمماو ة بالمقممدار. الجر ممان ااوة الجاار
particle will react with an opposite and equal وتتم لة قموت الجمر.معاكسة باالتجاه حسل قمانون ن موتن الثالمن
, الكل ة المبثرت في جسر مغمور في مائس جار من مركبت ن
force according to Newton’s third law. The drag
force, affecting a submerged particle, is made
up of two components.
475
PARTICLE MECHANICS 10 ميكانيك الدقائق
One component is associated with friction; it احداهما تخ االحتكاك وهي تاهمر نت جمة تم ث رات اجهاادا
forms as a result of shear stresses and is called القص التمي تسممى اوة الجار الجزجاة واألخمرى تمنجر ممن
the viscous drag. The other arises as a result of و في واقمس الحمال. ت ث رات الضغط وتدمى وة الجر الشكجية
the pressure effects and known as form drag. In ت ثر الجسر المغممور بقاوت الجار والرفاع كمما همو مبم ن فمي
fact, the submerged particle is influenced by the . 1..1 الشكل
drag and lift force, as seen in Fig 10.1.
u0
مستوى افقي Horizontal plane
(a)
(b)
FD = ½ CD ρ u02 Ap (10.1)
FD = Drag force
= قوت الجرFD
CD = Drag coefficient
= معامل الجرCD
u0 = Velocity
= السرمةu0
Ap = Projected area of the object
= مساحة مسقط الجسر المعامد للجر انAp
ρ = Density
= كثافة المائسρ
CD =
CD is similar to the Fanning friction factor وهممو مماثممل لمعامممل االحتكمماك فاننممك الممذ سممبق تعر فممف فممي
defined by equation (5.6) as follows: : ( كاالتي5.6) المعادلة
f=
̅
477
PARTICLE MECHANICS 10 ميكانيك الدقائق
We will now write a similar relationship for the بداللمة معامالFL القموت الرافعمة وف ما لي مالقة مماثلة تخ
lift force FL in terms of the lift coefficient CL: : CL الرفع
FL = ½ CL ρ u02 Ap (10.2)
Thus the resultant force acting on the object : وهكذا تصب محصلة القوى المبثرت في الجسر اآلتي
will be:
F=√ (10.3)
Substitute FD and FL in equation (10.3) Using (10.3) ( في المعادلة10.2, 10.1) و بالتعو ض من المعادلت ن
: نحصل ملى
equations (10.1 and 10.2), we obtain:
F = ½ ρ u02 Ap √ (10.4)
mg
.
35
Ground level سط االرض
478
PARTICLE MECHANICS 10 ميكانيك الدقائق
Given: : المعلور
Assumptions االفتراضات
We assume that the projected area of the kite نفممرض ان مساااحة مسااقط الطااائرة تسمماو المسمماحة السممطح ة
is equal to the whole surface area of the kite. الن مسمماحة المسممقط تتغ ممر باسممتمرار بسممبل تقلبممات, باكملهمما
This is because the projected area changes . الطائرت
continuously due to the variation in position of
the kite.
For a stable position of the kite as shown in Fig 1..3 فممي حالممة اسممتقرار طممائرت الممورق كممما مب م ن فممي الشممكل
10.3, the forces will be balanced as follows: : تتوا ن القوى ملى الوجف اآلتي
Vertical component of tension + Weight of kite ثقل الطائرت = القوت الرافعة+ مركبة قوت الشد الشاقول ة
= Lift force
Also: : وكذلك
Horizontal component of tension = Drag force مركبة قوت الشد االفق ة = قوت الجر
Thus: : أ أن
FL = mg T sin 35
We then estimate CL using the equations (10.1 ( 1..2 و1..1 ) من المعادلت نCL وCD ثر نحسل
and 10.2)
479
PARTICLE MECHANICS 10 ميكانيك الدقائق
CD =
CD = 0.460
CL =
CL = (38.49/1.2)/[(1.2/2) x (40000/3600)2]
CL = 0.43
10.4 Fluid flow across a cylinder جريان المائع عبر سطح اسطوان1101
If an infinite cylindrical object is subjected to a مندما ثبت جسر اسطواني الشمكل مممتمد لمى ماالنها مة بوضمس
cross flow of a certain fluid, the flow will then اذ, س كون الجريان ببعدين فقمط, عترض جر ان مائس مع ن
be two dimensional only because the flow ففمي حالمة. نعدر الجر ان باالتجماه المحماذ لطمول االسمطوانة
alongside the length of the cylinder does not جر ان مائع غير لزج مبرالجسمر سمتنعدر قموى الجمر الل جمة و
exist. However, in the case of a non-viscous ح ن تصب, 1..3 تخذ الجر ان نمطا ً كما هو مب ن في الشكل
fluid flow across the object, the viscous drag ب نمما تبلما اقصمىD وA السرمة مساو ة الصفر فمي النقطتم ن
forces will not appear and the flow will assume . C وB ق مة لها في النقطت ن
the pattern shown in Fig 10.3. The velocity in
this case will be equal to zero at A and D, and
will approach the maximum values at C and B.
A D
C
C
Fig 10.3 Flow around a cylindrical object الجر ان حول جسر اسطواني الشكل1101 الشكل
For incompressible flow, the sum of the kinetic واذا كان المائس الجار مائعا ً غ ر انضمغاطي ف سمكون مجمموم
energy and pressure energy will be constant all الطاقة الحرك ة وطاقة الضغط ثابتا ً في جم س نقاط سط الجسمر
over the surface of the object. Consequently وA لهذا تكون الطاقة الحرك مة تسماو صمفراً فمي النقطتم ن,
the kinetic energy will be zero at A and D, whilst . ب نما صب الضغط مند ق متف القصوىD
the pressure will be at the maximum value.
480
PARTICLE MECHANICS 10 ميكانيك الدقائق
The pressure at A is equal to the pressure at D, وتصب محصلة القوى الممبثرت فمي الجسمر االسمطواني مسماو ة
therefore the resultant force, acting on the وملممى. D وA الصممفر بسممبل مسمماوات الضممغط فممي النقطتم ن
cylindrical object, will be equal to zero. For a مكمن تطب مق معادلمة برنمولي افتراض ان المائس مائس غ ر لم
non-viscous fluid, the Bernoulli equation can be التمي تسمممى نقطاة الركااود وأ نقطمة اخممرى فمميA بم ن النقطممة
applied to estimate the pressure between A, اذ تتحول طاقمة الضمغط هنما باكملهما, المجرى لحسال الضغط
which known as the stagnation point, and any : أ أن, لى طاقة حرك ة كما مر ذكره
other point in the flow stream. The pressure
energy here is totally converted to kinetic
energy as mentioned earlier, thus:
= (10.5)
It is worth noting that equation (10.5) can be ( تطبق ملى الجر ان غ ر10.5) وتجدر المالحاة بان المعادلة
applied to incompressible flow at all times, ب نما تطبق ملى الجر ان االنضغاطي, االنضغاطي دون تحفا
whilst for compressible flow, the equation is أما في حالة كون رقر مماخ, ..4 ح ن ال تتعدى ق مة رقر ماخ
only applicable for Mach number values less فاالمر ستل ر حسال ضط السكون االيسانتروب..4 اكبر من
than 0.4. However, if Mach number is greater الذ عرة بضغط الغا ح ن بلا مجرى المائس حالمة الركمود
than 0.4, the isentropic static pressure, known : و حسل من,ا سنتروب ا
as the gas pressure, must be evaluated when
the fluid stream is at the state of isentropic
stagnation; it is calculated by:
( )(ɤ-1)/ɤ = (10.6)
481
PARTICLE MECHANICS 10 ميكانيك الدقائق
However, for the flow of a viscous fluid, the وفممي حالممة جر ممان مااائع لاازج مبممر الجسممر االسممطواني فمماألمر
analysis will be quite different; this is due to the فممماذا كانمممت سمممرمة. ختلممة تمامممما ً لنشممموء الطبقاااة المتا ماااة
formation of the boundary layer. Additionally, if , ..5 مممثالً رقممر ر نولممد أصممغر مممن, جر ممان المممائس واطئممة
the fluid velocity is low, for example Re < 0.5, فس كون نمط الجر ان حول االسطوانة مماثالً لججريان المثال
the flow regime around the cylinder will be وال حصل انفصال للطبقة المتاخمة, أ الجريان غير الجزج,
similar to the ideal flow or non-viscous flow. In مممن سممط الجسمممر لممذا تكمممون مقاومممة الجممر ناتجمممة مممن قممموى
this case, there is no separation of the وبا د مماد رقممر. (a)-1..4 أناممر الشممكل, الجرالل جممة فقممط
boundary layer from the object surface بمدأ انفصمال الطبقمة المتاخممة فمي3. - 2 ر نولد لى مماب ن
because the drag resistance is caused by the و اهمر ت مارانb -1..4 كمما تضم فمي الشمكلS النقطتم ن
viscous drag forces only, see Fig 10.4 - (a). As وبا د ممماد السمممرمة. متمممماثالن مممدوران باتجممماه ن متعاكسممم ن
تناق ت ث ر قوت الجر الل جة و م داد تم ث ر قموت الجمر الشمكل ة
Reynolds number increases to around 2-30, the
ً فممثال, الناجمة من الضغط و سمتمر انفصمال الطبقمة المتاخممة
separation of the boundary layer begins and
صب مقمدار قموت الجمر الشمكل ة مسماو ا ً ثالثمة أربمام قموت الجمر
two opposite rotating currents appear at the
. (c)-1..4 أنامر الشمكل, 9. الكل ة مند بلمو رقمر ر نولمد
two points labelled S in Fig 10.4 - (b). The
و م داد نشمموء الممدوامات فممي الطبقممة المتاخمممة با د مماد سممرمة
influence of the viscous drag force decreases
الجر ان وتتحول لى طبقة متا مة اضطرابية مندما بلما رقمر
due to the increase in velocity, whilst the
. (d)-1..4 كمما تضم فمي الشمكل2 x 105 ر نولد هماء
influence of the form drag force, caused by
و تجممدر المالحاممة بمم ن االضممطرال اهممر أممما بسممبل ممادت
pressure, increases. For example, if Reynolds السرمة أو نت جة خشونة سط االسطوانة األمامي المغمور في
number approaches 90, the form drag force will . المائس
be ¾ of the total drag force, see Fig 10.4 – (c).
As Reynolds number approaches 2 x 105, the
onset of eddy currents will increase, and the
boundary layer will change to a turbulent
boundary layer as illustrated in Fig 10.4 – (d). It
is worth noting that turbulence appears due to
either increase in velocity or increase in
roughness of the front cylinder submerged
surface.
482
PARTICLE MECHANICS 10 ميكانيك الدقائق
Fig 10.4 Flow of a fluid around a cylinder at جر ان المائس حول جسر اسطواني بسرم مختلفة1101 الشكل
different velocities
483
PARTICLE MECHANICS 10 ميكانيك الدقائق
10.5 Flow past spherical particles الجريان عبر جسيما كروية الشكل1101
The fluid flow past a sphere is similar to that تتشمممابف طب عمممة الجر مممان حمممول الكمممرت ممممس تلمممك حمممول الجسمممر
across a cylinder, but in this case it is a three ال ان الجر ممان كممون بثالثممة أبعمماد ول م ببعممد ن, األسممطواني
dimensional flow compared to the two وتعمد دراسمة جر مان الموائمس, 1..4 كما مر ذكمره الفقمرت
dimensional flow mentioned in section 10.4. مبمممر الجسممم مات الكرو مممة مهممممة ألنهممما تشمممكل أساسممما ً الشمممتقاق
The study of flow past spherical particles is . معادالت تخ الدقائق الكرو ة ضمن ملر م كان ك المدقائق
considered fairly important, because it forms وكما ذكرنا متا هذا العلمر بتطب قمات مد مدت فمي الصمنامة مثمل
the basis for the development of the relevant وسممنتطرق الممى. فصممل الممدقائق الصمملبة مممن الموائممس وغ رهمما
equations in the field of particle mechanics. As . القوان ن والمعادالت ذات العالقة في الفقرات االت ة
we mentioned earlier, this field has many
applications in industry, such as the separation
of solid particles from fluids and so on. In what
follows, we will cover the laws and relationships
relevant to the separation of particles.
FD = 3 π µ d p u 0 (10.7)
Stokes law applies to the cases where Reynolds ممد ف همما رقممر مكممن تطب ممق قممانون سممتوك ملممى حمماالت ال
number Re does not exceed 0.2, considering: : ح ن..2 ملىRe ر نولد
Re = (10.8)
484
PARTICLE MECHANICS 10 ميكانيك الدقائق
We can estimate the drag coefficient CD by للجر ان باستخدار المعادلت نCD ونستط س حسال معامل الجر
combining equation (10.1) with (10.7) to obtain: : ( فنحصل ملى10.7 , 10.1)
½ CD ρ u02Ap = 3 π µ dp u0 (10.9)
The projected area for a sphere is a circle, thus: : والمعلور ان مساحة مسقط الكرت ساو مساحة الدائرت لذا
Ap = π dp2/4
CD = 24 ( ) (10.10)
Substituting in terms of Reynolds number using ( نحصمل10.8) و بالتعو ض بداللة رقر ر نولمد ممن المعادلمة
equation (10.8), we obtain: : ملى
CD = (10.11)
or أو
= 12 Re-1 (10.12)
485
PARTICLE MECHANICS 10 ميكانيك الدقائق
0.44
5
0.2 500 10
Re
Fig 10.5 Drag Coefficient vs. Reynolds number معامل الجر ضد رقر ر نولد1101 الشكل
The curve shows 4 distinct areas, these are: : و تض في المنحنى اربس مناطق هي
(a) The area in which the curve follows أ المنطقممة التممي تخممذ المنحنممى بهمما شممكالً تبممس معادلممة
Stokes equation (eq. 10.11); it is وهممي محممددت بممالق ر1..11 المعادلممة سممتوك
-4
defined by the values 10-4 < Re < 0.2 10 < Re <0.2
(b) The area defined by Reynolds number ل المنطقممممممممممة المحممممممممممددت بقمممممممممم ر رقممممممممممر ر نولممممممممممد
(0.2 < Re < 500 -103). The curve can be ( و وجمممد ممممدد ممممن0.2 < Re < 500-103)
plotted by many equations and the المعادالت تصة منحنى هذت المنطقة واهمهما معادلمة
most popular is Schiller and Naumann : شجر و نومان وهي
equation, which is:
486
PARTICLE MECHANICS 10 ميكانيك الدقائق
Allen suggested that the curve for this area has وكذلك اقترح آلن ان المنحني لهمذه المنطقمة لمف م مل سماو
a slope (-1/2) and the drag coefficient (Re-1/2) ( و ان معامل الجر تناسل طرداً مس- ½)
proportional to (Re-1/2)
(c) The area defined by Reynolds number ت المنطقمة المحمددت بقم ر رقمر ر نولمد بم ن
between (500-103) and (2x105), in this ( هنمما بقممى معامممل الجممر2x105) ( و500-103)
case the coefficient remains constant : ثابتا ً و تبس الخط معادلة ن وتن وهي
and the curve follows Newton’s
equation, which is:
CD = 0.44 (10.14)
(d) The area defined by Reynolds number (2x105) ن المنطقمة المحممددت بقم ر ر نولممد أكبممر مممن
greater than (2x105). In this case the و هنممما تتغ مممر الطبقمممة المتاخممممة ممممن أنسممم اب ة لمممى
boundary layer will change from , اضممطراب ة و حصممل االنفصممال فممي مممبخرت الكممرت
streamline to turbulent and separation و نخفض مقدار قموت الجمر كث مراً ح من تخمذ معاممل
takes place at the rear of the sphere. : الجر الق مة
The value of the drag force will be
significantly reduced and the
coefficient will be given by:
CD = 0.1 (10.15)
Fig 10.6 shows that the curve is actually ان المنحنممى فممي الواقممس هممو منحنممى1..6 و الحمما فممي الشممكل
continuous, and the division into 4 areas is متصمممل وان تقسممم مف لمممى اربمممس منممماطق سمممهل مهممممة ترت مممل
simply to clarify how the equations fit into the . المعادالت التي تصفف
plot.
(a) As mentioned in section 10.5.1 the المنطقمممة أ التمممي سمممبق وان ب نممما فمممي الفقمممرت أ
force in this area is estimated by Stokes ان القمممموت تعطممممى ف همممما مممممن معادلممممة1..5.1
law which is equation (10.7) 1..7 ستوك وهي المعادلة
487
PARTICLE MECHANICS 10 ميكانيك الدقائق
10000
1000
100
CD/2
10
0.1
0.01
0.001 0.1 10 1000 100000 10000000
Re
Fig 10.6 CD/2 vs. Re for spherical particles للدقائق كرو ة الشكلRe ضدCD/2 1101 الشكل
488
PARTICLE MECHANICS 10 ميكانيك الدقائق
(b) In this area, the drag force is calculated ل المنطقمممة التمممي تحسمممل ف هممما قممموت الجمممر الكل مممة
by equations (10.1 and 10.13), thus: : ( أ ان1..13 و1..1) باستخدار المعادلت ن
Ap = π dp2/4
ρ u 0 2 A0
(c) The area where equations (10.1 and 1..1 ) ت المنطقة التي نستخدر ف ها المعادلت ن
10.14) are applied. ( 10.14 و
Equation (1..17) is known as Newton’s law. .( بقانون ن وتن10.17) وتعرة المعادلة
(d) The area where equations (10.1 and و1..1 د المنطقة التي نستخدر ف ها المعادلت ن
10.15) are used 1..15
489
PARTICLE MECHANICS 10 ميكانيك الدقائق
The drag force can be substituted by one of و عمموض مممن قمموت الجممر باحممد المعممادالت المممذكورت فممي الفقممرت
section 10.5.3 equations, for example, for low فمثالً اذا كان الجر ان بط ئا ُ نطبق قمانون سمتوك و, 1..5.3
velocity flow we use Stokes law to obtain the : تصب معادلة موا نة القوى كاآلتي
following force balance:
uT = (ρs – ρ) (10.21)
If the flow obeys Newton’s law, we get: : واذا كان الجر ان تبس قانون ن وتن نحصل ملى
uT = √ (10.23)
Note that the derivation of the two equations (1..23) و1..21 و تجدر مالحاة ان اشتقاق المعادلت ن
(10.21) and (10.23 were based on the following : تر بافتراض
assumptions:
491
PARTICLE MECHANICS 10 ميكانيك الدقائق
(a) The fall of the particles through the أ هبوط الدقائق في المائس خال من ت ث رات جانب مة بم ن
fluid is not influenced by any external الدقائق مثل الكهرومغناط س ة وما اشبف ذلك
forces such as electromagnetism ل ال وجد أ ت ث ر لجدران الوماء الحاو
(b) There is no container-wall effect أ ان قطمممر الدق قمممة كب مممر, ت الممممائس وساااط متصااال
(c) The fluid is a continuous medium; this ملمم. مقارنة بمتوسط المسار الحر لج ئات المائس
means that the diameter of the particle انمممف اذا كانمممت المممدقائق صمممغ رت جمممداً فانهممما سمممتت ثر
is large compared to the free mean بالحركة البراونية
path of the fluid particles. If the size of
the particle is too small, it will be
influenced by the Brownian movement
It is quite possible to perform calculations for مكممن اجممراء حسممابات تخممض ممل ممة فصممل خلمم ط مممن
the separation of two particles, in a mixture, الممدقائق الصمملبة لمممادت ن باسممتخدار معممادالت تسممتند لممى
made of different materials by using equations . سرمة السمقوط النهائ مة فمي ممائس اقمل كثافمة ممن الصملل
based on the concept of the terminal falling B وρA كثافتهماA فاذا كان الخل ط متكون ممن الممادت ن
velocity. In this case, the solid particle is moving وكانمممت المممدقائق صمممغ رت لمممى حمممد جعمممل, ρB كثافتهممما
down through a fluid of density lower than that الجر ان تبمس قمانون سمتوك فمان سمرمة السمقوط النهائ مة
ρ فممي ممائس كثافتممفdA قطرهماA لدق قمة ممن المممادتuTA
of the solid. Consider a mixture consisting of
: ( كاالتي1..21) تعطى من المعادلة
two different materials; A with a density ρA and
B with a density ρB; and the particle size is small
enough for the flow to obey Stokes law. Thus,
the terminal falling velocity uTA of a particle A
having diameter dA falling in a fluid with density
ρ, will be obtained using equation (1..21) as
follows:
Similarly, we can obtain an expression for the وبممنف الطر قممة نسممتط س حسممال سممرمة السممقوط النهائ ممة
terminal falling velocity uTB for particle B with a dB قطرهمماB فممي نفمم المممائس لدق قممة مممن المممادتuTB
diameter dB, in the same fluid, as follows: : كاالتي
When the two terminal falling velocities are : فعندما تتساوى سرمتا السقوط النهائ ة للدق قت ن أ
equal, that is:
=√ (10.26)
If the flow past the particles obeys اما اذا كان الجر ان مبر الدقائق تبس قانون ن وتن نسمتخدر
Newton’s law, we use equation (1..23) to : لحسال سرمة السقوط النهائ ة, (10.23) المعادلة
estimate the terminal falling velocity:
uTA = √ (10.27)
uTA = √ (10.27)
uTB = √ (10.28)
uTB = √ (10.28)
When the two velocities uTA and uTB are : نحصل ملىuTB وuTA وح ن تتساوى السرمتان
equal, we get:
= (10.29)
A general equation for the equal terminal و مكن كتابة معادلة مامة لحالة مساوات سرمتي السقوط
velocities can be written as follows: : النهائ ة كاآلتي
=( )n (10.30)
493
PARTICLE MECHANICS 10 ميكانيك الدقائق
The value of n depends on the type of flow ملمى نممط الجر مان المذ حمدده رقمرn ح ن تعتمد ق ممة
which is determined by Reynolds number. It وهمي تسماو ½ لمنمط الجر مان الممثمل بقمانون, ر نولد
is ½ for the Stokes law regime, 1 for the سمممتوك وتسممماو واحمممداً للمممنمط الممثمممل بقمممانون الن ممموتن
Newton law regime and ( ½ < n <1) for the . < ½ ( لمنطقة الجر ان الب ن ةn <1) و
flow in between.
Solution الحل
Given:
: المعلور
dp = 15 µ = 15 x 10-6 m, ρs = 2600 kg/m3, T = 20 0C = (20 +273) K
Assumptions االفتراضات
494
PARTICLE MECHANICS 10 ميكانيك الدقائق
We first compute the terminal falling نحسل أوالً سرمة السقوط النهائ ة ثر نوجد االرتفمام
velocity, and then we estimate the وقبممل الشممروم. بضممرل السممرمة بمم من الترسمم ل
height by multiplying the velocity by بحسممال السممرمة جممل تع م ن نمممط الجر ممان لغممرض
time. To choose the appropriate اخت مممار المعادلمممة المالئممممة لحسمممال سمممرمة السمممقوط
equation to calculate the terminal . النهائ ة
velocity, we must determine the flow
regime.
Since the particles are very small in size, و لما كانمت المدقائق صمغ رت جمداً لمذا مكمن افتمراض
we can therefore assume that the flow جر ان الهواء مبر الدقائق اثنماء ترسم بها تبمس قمانون
: ستوك
of air past the particles obeys Stokes
law, which is:
Pv=RT
V = 1/ρ
P/ = R0T/M
= 1.2059 kg/m3
uT = ( 2600 -1.2059)
uT = 0.0177 Ns/m2
495
PARTICLE MECHANICS 10 ميكانيك الدقائق
t x uT = 60 x 0,0177 = 1.062
m
We will now compute the Reynolds number to واالن نحسممل رقممر رنولممد للت كممد مممن صممحة اسممتخدار قممانون
justify the application of Stokes law: : ستوك
Re =
Re =
Re = 0.01778
The value of Re is less than 0.2 which justifies ممما بمرر اسمتخدار قمانون سمتوك..2 وهذا الرقر أصمغر ممن
the use of Stokes law. . في حل المس لة
A mixture of solid particles consists of two و كممان قطممر. B وA تكممون خل م ط دقممائق صمملبة مممن مممادت ن
different materials, A and B. The particle size of (2.5 x10-5) ( و5.21 x 10-6) دقمائق الخلم ط تمراوح بم ن
the mixture is in the range 5.21 x10-6– 2.5 x10-5. ومنممد ترسااي الممدقائق فممي وممماء حتممو ممماء بدرجممة حممرارت
The particles are separated by settling in a األولمى, وجد ان ثالن مجمومات ترسبت في القعمر293.2 K
vessel containing water at 293.2 K. Three والثان مة تحتمو خل طما ُ ممن, فقطA تحتو دقائق من المادت
clusters of the settled particles appear, one is احسل قطر. فقطB والثالثة متكونة من دقائق المادت, B وA
made up of particles A only, the second is a اصغر دق قة واكبرهما فمي كمل مجموممة مفترضما ً دقمائق كرو مة
mixture of A and B and the third consists of و أنهممما تتبمممس قمممانون, تترسمممل دون تممم ث ر أ قممموى خارج مممة
particles B only. Compute the smallest and ستوك
largest particle in each cluster assuming
spherical particles settle according to Stokes
law, without any external influence.
496
PARTICLE MECHANICS 10 ميكانيك الدقائق
Solution الحل
Given: :المعلور
Since the density of material A is higher than B, لذا ستترسلB أملى من كثافة المادتA لما كانت كثافة المادت
the largest particle of A will settle in cluster (1) ( ب نما تترسمل أكبمر1) في المجمومةA أكبر دق قة من المادت
and the largest of B will settle in cluster (2). . (2) في المجمومةB دق قة من
The largest particle size of material B is 2.5 x 10-5 وقطرهما سماوB أكبمر دق قمة همي ممن الممادت
2.5 x 10-5, therefore we can estimate the largest التمي تترسمل معهماA واآلن نحسل قطر أكبر دق قمة ممن الممادت
size of A, which will settle at the same terminal (1..26) بنف سرمة السقوط النهائ ة باستخدار المعادلة
falling velocity, by applying equation (10.26)
497
PARTICLE MECHANICS 10 ميكانيك الدقائق
=√
2.5 x 10-5/dA = √
dA = 1.26 x 10-5 m
In fact, this is the largest particle of material A فمي المجموممةA وهو فمي الواقمس قطمر أكبمر دق قمة ممن الممادت
in cluster (2). We know that the smallest هي أ ضا ً تترسلA ولما ملر ان اصغر دق قة من المادت. 2
particle of material A is also in cluster (2), thus اذن تتراوح اقطار الدقائق في المجموممات, 2 في المجمومة
the size range of the particles in the three : الثالن كاآلتي
clusters will be as follows:
Cluster (1)
1 المجمومة
Material A - Smallest particle, 1.26 x 10-5 m 1. 26 x 10-5 m , أصغر دق قة - A المادت
Largest particle, 2.5 x 10-5 m 2.5 x 10-5 m , أكبر دق قة
Cluster (2) 2 المجمومة
Material A – Smallest particle, 5.2 x 10-6 m 5.2 x 10-6 m , أصغر دق قة - A المادت
Material B - Smallest particle 1.03 x 10-5 m 1.03 x 10-5 m , أصغر دق قة - B المادت
Material B - Smallest particle, 5.2 x 10-6 m 5.2 x 10-6 m , أصغر دق قة - B المادت
498
PARTICLE MECHANICS 10 ميكانيك الدقائق
Exercise تمرين
Given the following data, use Excel to solve معتمممدا المعمومممات1..3 اسمتخدر برنممام االكسممل لحممل المثممال
example 10.3. : االت ة
Applying equation (10.1) to a particle moving at ( ملى اروة سرمة السقوط النهائ مة1..1) وبتطب ق المعادلة
the terminal falling velocity uT, we obtain: : نحصل ملىuT
499
PARTICLE MECHANICS 10 ميكانيك الدقائق
Combining equations (10.31) and (10.32), we : ( نحصل ملى اآلتي1..32 و1..31) و بدم المعادلت ن
obtain:
= (ρs – ρ)
Multiplying the two sides of the above equation : فنحصل ملىRe2 ثر نضرل طرفي المعادلة بالمقدار
by Re2, we get:
Re2 = (ρs – ρ) ( )2
Re2 = (10.33)
Re2 = Ga (10.34)
The following equations, for Galileo number in و مكن التوصمل لمى المعمادالت اآلت مة لمرقر غمال ل و بداللمة رقمر
terms of Reynolds number, can be developed: : ر نولد
500
PARTICLE MECHANICS 10 ميكانيك الدقائق
The terminal falling velocity is estimated by ( باسمتخدار Re2 ) و تحسل سرمة السقوط النهائ مة بتقمو ر
evaluating ( Re2), using equation (10.33). ( وبعمممد ذلمممك تعممم ن ق ممممة رقمممر ر نولمممد ممممن1..33) المعادلمممة
Reynolds number is then estimated from curve . ومنف السرمة المطلوبة1..8 في الشكل1 المنحنى
(1) of Fig 10.8, which will provide the velocity وتجدر االشارت هنا لى انف مكن حسال قطمر المدقائق الكرو مة
في حالة معرفة مقدار سرمة السقوط النهائ ة باستخدار المنحنمى
value. Note that the diameter of the particle
can be computed if the terminal falling velocity ( من المعادلة ) وتحسل المجمومة1..8 في الشكل2
is known, using curve (2) from Fig 10.8. In this :
case ( ) is first calculated using the following
equation:
= (ρs – ρ) (10.38)
Reynolds number is then estimated from the .ثر ع ن مقدار رقر ر نولد من المنحنى و منف القطر المطلول
curve. Reynolds number will provide the
diameter value.
الحل
Solution
: المعلور
Given:
501
PARTICLE MECHANICS 10 ميكانيك الدقائق
8
100000000
10 2
7
(Cd/2) x Re
10 10000000
106 1000000
105100000
104 10000
1
103 1000
102 100
10 10
0
10 1
10-1 0.1
10
-2 0.01 2
10-3 0.001
10-50.00001
10-2
0.01 10-1
0.1 1001 10
10 102
100 1000
103 10000
104
Re
502
PARTICLE MECHANICS 10 ميكانيك الدقائق
We calculate Re2 using equation (10.33) (1..33 ) باستخدار المعادلة Re2 نحسل المقدار
Re2 =
= 0.2419
The value of Re is found from Fig 10.8 to be 1.6 ملى وجمف1.6 تساوRe الحا ان ق مة1..8 ومن الشكل
approximately التقر ل
Re =
10.6 Terminal falling velocity for ساااارعة السااااقوط النهائيااااة لجااااد ائ غياااار10.6
non-spherical particles الكروية
In section 10.5, we noticed that the projected ان مساحة مسقط الدق قة كرو ة الشكل1..5 لقد تب ن في الفقرت
area of a spherical particle is equal to the area اما في حالة, ساو مساحة الدائرت بصرة النار من موقعها
of a circle; this is regardless of the particle الدقائ غ ر الكرو ة فستعتمد مساحة المسقط ملمى موقمس الدق قمة
positioning. However, for non-spherical و مكمن رسمر. الذ حدد اتجاهها نسبة لى اتجاه جر ان الممائس
particles, the projected area will depend on the منحنممى ب م ن معامممل الجممر ورقممر ر نولممد بطر قممة مماثلممة لتلممك
position of the particle which defines the . الخاصة بالدقائق الكرو ة
direction of the particle fall relative to the fluid
flow. In a similar manner to that of a spherical
particle, we can plot a curve depicting the drag
coefficient verses a specific Reynolds number.
503
PARTICLE MECHANICS 10 ميكانيك الدقائق
Reynolds number, in this case, will be based on ال ان رقممر ر نولممد لهممذه الممدقائق حسممل ملممى اسمما قطممر
the diameter of a circle whose area is equal to . دائممرت مسمماحتها مسمماو ة مسمماحة مسممقط الدق قممة غ ممر الكرو ممة
the projected area of the non-spherical particle. طر قممة لحسممال سممرمة السممقوط1948 اوجممد هيااوود فممي مممار
in 1948, Heywood followed a similar method to وقمد. النهائ ة متبعا نف األسلول الذ خ المدقائق الكرو مة
that used for a spherical particle to estimate the (π m2/4) مممد مسمماحة مسممقط الدق قممة غ ممر الكرو ممة تسمماو
terminal falling velocity. He considered the انممفdm ومممرة. مثممل متوسااط طاار المسااقطdm ملممى ان
projected area for the non-spherical particle to قطر الدائرت التي تكون مسماحتها مسماو ة مسماحة الدق قمة منمدما
be (π m2/4); where dm denotes the mean وممممد حجمممر الدق قمممة غ مممر الكرو مممة. نامممر ال هممما ممممن األملمممى
projected diameter. He defined dm as the هو ثابت تعتمد ق متف ملمى شمكلk’ ح ن, (k’ dm3) ساو
diameter of a circle whose area is equal to the . ً للشكل الكرو مثالπ/6 الدق قة فهو ساو
area of the particle viewed from above. He also
considered the volume of the non-spherical
particle to be (k’ dm3), where k’ is a constant
with a value related to the shape of the particle;
for example, it is equal to π/6 for a spherical
particle.
The Heywood method is based on finding a و تتلخ طر قة ه وود با جاد ق ممة رقمر ر نولمد ممن الشمكل
value for Reynolds number for a spherical dm وهنا نقدر قطمر الكمرت, الذ خ الدقائق الكرو ة1..8
particle, using Fig 10.8. Reynolds number here is (log Re) ثر ضاة او طرح معامل تصح لىdp بدالً من
based on dm, the sphere diameter, instead of dp, حسل ق مة كل من1..1 الذ بخذ من الجدول
the particle diameter. A correction factor is k’ وlog [(CD/2)Re2]
then added or subtracted from (log Re) which is
read from table 10.1 according to the values of
log [(CD/2)Re2] and k’.
2 ’ ’ ’ ’
log [(CD/2)Re ] k = 0.4 k = 0.3 k = 0.2 k = 0.1
̅ -0.022 -0.002 +0.032 +0.131
̅ -0.023 -0.003 +0.030 +0.131
0 -0.025 -0.005 +0.026 +0.129
1 -0.027 -0.010 +0.021 +0.122
2 -0.031 -0.016 +0.012 +0.111
2.5 -0.033 -0.020 0.000 +0.080
3 -0.038 -0.032 -0.022 +0.025
3.5 -0.051 -0.052 -0.056 -0.040
4 -0.068 -0.074 -0.089 -0.098
4.5 -0.083 -0.093 -0.114 -0.146
5 -0.097 -0.110 -0.135 -0.186
5.5 -0.109 -0.125 -0.154 -0.224
6 -0.120 -0.134 -0.172 -0.255
504
PARTICLE MECHANICS 10 ميكانيك الدقائق
The velocity uT is then calculated using the و, من ق مة رقر ر نولد المصححةuT ثر تحسل السرمة
corrected Reynolds number in the following : تستخدر المعادلة اآلت ة
equation:
We can also compute the volume of the non- كذلك مكن حسال حجر الدقائق غ ر الكرو ة ح ن تكون سرمة
spherical particles using Fig 10.8 and then واجراء تصح1..8 السقوط النهائ ة معلومة باستخدار الشكل
correcting the value of the Reynolds number وتحسممممل ق مممممة1..2 لق مممممة رقممممر ر نولممممد مممممن الجممممدول
using table 10.2. The value of (CD/2Re) is : ( من المعادلة اآلت ةCD/2Re)
estimated by the following equation:
Equations (10.39 and 10.40) were developed in ( بطر قممة مماثلممة1..4. و1..39) وقممد اشممتقت المعادلتممان
a similar manner to equations (10.33 and 10.38) (1..38 و1..33) الشتقاق المعادلت ن
-1 ’ ’ ’ ’
log [(CD/2)Re ] k = 0.4 k = 0.3 k = 0.2 k = 0.1
̅ +0.185 +0.217 +0.289
̅5 +0.149 +0.175 +0.231
̅ +0.114 +0.133 +0.173 +0.282
̅5 +0.082 +0.095 +0.119 +0.170
̅ +0.056 +0.061 +0.072 +0.062
̅5 +0.038 +0.034 +0.033 -0.018
+0.028 +0.018 +0.007 -0.053
̅5 +0.024 +0.013 -0.003 -0.061
0 +0.022 +0.011 -0.007 -0.062
1 +0.019 +0.009 -0.008 -0.063
2 +0.017 +0.007 -0.010 -0.064
3 +0.015 +0.005 -0.012 -0.065
4 +0.013 +0.003 -0.013 -0.066
5 +0.012 +0.002 -0.014 -0.066
505
PARTICLE MECHANICS 10 ميكانيك الدقائق
Solution الحل
Given: : المعلور
g = 9.81 m/s2
We calculate the terminal falling velocities for نحسل سرمة السقوط النهائ ة الصغر صف حة والكبر واحدت
the smallest particle and for the largest one : ( والمعلومات اآلت ة1..39 ) باستخدار المعادلة
using equation (10.39) and the following
information:
dm = √ = 2.76 x 10-3 m
506
PARTICLE MECHANICS 10 ميكانيك الدقائق
k’ = 0.285
Following the similar steps for the largest (k’ = 0.0285) الخطوات الكبر صف حة نجد ان وب تبام نف
particle, we find: (k’ = 0.0285)
: ( 1..39) نعوض في المعادلة
Substituting in equation (10.39):
Re2 = [(4 x 0.285 x 850 x 2.76 x 10-3 x 9.81) / (10 x 10-3)2 π](3... – 820)
Re2 = 1340
We find the value of Re from Fig 10.8 which is : تقر با وان38 وهي تساو1..8 من الشكلRe نوجد ق مة
38 approximately, and we have:
We find the correction factor from table 10.1, و بهذا...38 و هو1..1 نوجد مقدار التصح من الجدول
which is 0.038, thus the corrected value of : ( المصححةlog Re) تصب ق مة
(log Re) is:
Re = 34.75
Re =
507
PARTICLE MECHANICS 10 ميكانيك الدقائق
Following similar steps we obtain the terminal وباتبام نف الخطوات نجد سرمة السقوط النهائ ة الكبر
falling velocity for the largest particle: : صف حة هي
uT = 0.153 m/s
Comment مالحظة
The results show that almost all the particles سرمة نستنت من النتائ ان الصفائ تترسل جم عها بنف
attain the same terminal falling velocity. . السقوط النهائ ة ملى وجف التقر ل
Exercise تمرين
If the particles fall through water, repeat the مستخدم1..5 امد حل المثال, اذا استبدل السائل بالماء
solution of example 10.5 using Excel. . برنام االكسل
π π π
( dp3 ρs ) ( )=( ρs g ) - ( ρ g ) – FD (10.41)
508
PARTICLE MECHANICS 10 ميكانيك الدقائق
Note that for a particle moving at the terminal وتجممدر االشممارت هنمما لممى انممف اذا بلغممت الممدقائق سممرمة السممقوط
falling velocity, the acceleration ( ) is equal to وتصمممب المعادلمممة, ً( سممماو صممفرا ) النهائ ممة فالتعج مممل
zero. Consequently, equation (10.41) will be فماذا كمان الجر مان مبممر, 1..19 مماثلمة للمعادلمة1..41
similar to equation (10.19). However, if the flow : ( فانRe > 0.2) الدقائق تبس قانون ستوك أ أن
obeys Stokes law, that is ( Re > 0.2 ), we have:
π π π
( dp3 ρs ) ( )=( ρs g ) - ( ρ g ) – 3 π dp μ u (10.42)
Simplifying: : وبالتبس ط
A=
B = g ( 1- )
509
PARTICLE MECHANICS 10 ميكانيك الدقائق
Integrating equation (10.45) will make it ( نستط س تخمم ن سمرمة الدق قمة فمي1..45) وبمكاملة المعادلة
possible to estimate the instantaneous velocity أ لحاة اثناء سمقوطها فمي الممائس قبمل بلوغهما سمرمة السمقوط
of a particle falling in a fluid before reaching the و كممذلك حسممال ال م من الممال ر لوصممول الدق قممة لممى, النهائ ممة
terminal falling velocity. It will also be possible . سرمة مع نة
to compute the time required for the particle to
achieve a certain velocity.
Solution الحل
Given: :المعلور
dp = 0.3 x 10-3 m, ρs = 3 x 103 kg/m3, ρ = 9.. kg/m3,
Find: : المطلول
The time t when the velocity of the particle is 0.99 uT مندما تكون سرمة الدق قة تساوt حسال ال من
equal to 0.99 uT
Integrating equation (10.45) between the limits (u = 0.99 uT) ( وu = 0.0) ب ن1..45 نكامل المعادلة
(u = 0.0) and (u = 0.99 uT)
=B–Au
510
PARTICLE MECHANICS 10 ميكانيك الدقائق
∫ dut =
∫
t = [ - (1/A) ln (B – A u)]00.99uT
t= ln
uT = (ρs – ρ)
t= ln
t= ln 100
t= = 2.3 x 10-3 s
511
PARTICLE MECHANICS 10 ميكانيك الدقائق
Clean gas
الغا المنقى
Mixture
الخل ط
Particles
الدقائق
π π
dp3 ρs = – ( ρs -ρ) r ω2– 3 π dp μ u (10.46)
Where (r ω2) is the acceleration, r is the radius همو نصمة قطمر المدائرتr ( همو التعج مل وr ω2) ح من أن
of the circle depicted by the particle rotational همممي السااارعةω التمممي ترسممممها حركمممة المممدقائق الدوران مممة و
motion and ω is the angular velocity. : وبالتبس ط نحصل ملى, الزاوية
Simplifying will yield:
= r ω2 (1 - - u (10.47)
= r ω2 (1 -
=br–au (10.48)
512
PARTICLE MECHANICS 10 ميكانيك الدقائق
b = ω2 (1 - , a=
Substituting for the velocity by the differential : ( نت اآلتي ) وبالتعو ض من السرمة بالمقدار التفاضلي
( gives:
+a –br=0 (10.49)
The second order differential equation (10.49) ( باسمتخدار الحلمول1..49) و مكمن حمل المعادلمة التفاضمل ة
can be solved by well-known mathematical المعروفممة فممي الر اضم ات بكونهمما معادلممة تفاضممل ة مممن الدرجممة
methods. However, the equation can be ( باهممال التعج مل و1..49) و مكمن تبسم ط المعادلمة. الثان مة
simplified by ignoring the acceleration and : افتراض الدق قة تدور في حالة ات ان فتصب المعادلة
assuming the particle is rotating in a state of
equilibrium; the equation then becomes:
a –br=0 (10.50)
Integrating equation (10.50) for the limits r1 to : r لىr1 ( ب ن نصة القطر1..5.) وبمكاملة المعادلة
r, we obtain:
a∫ =∫
a ln =bt (10.51)
ln = (10.52)
513
PARTICLE MECHANICS 10 ميكانيك الدقائق
Consider a particle at the liquid surface, located ففي فرازة الطرد المركزي اذا كانت الدق قة موجودت ملى سط
at a distance ri from the centre of a centrifuge أ, من مركم الومماء قبمل بمدء دورانمفri السائل ببعد
before the onset of rotation, thus at (t =0). The فم مكن حسمال الم من المال ر لوصمول الدق قمة لمى, t = 0
time required for the particle to travel to the : كاآلتيR جدران الوماء األسطواني الذ قطره
surface of the cylindrical vessel of radius R can
therefore be estimated as follows:
μ
t= ln 10.53)
ω ( )
A liquid of density 801 kg/m3 and viscosity 0.1 0.1 Ns/m2 ول وجتمف801 kg/m3 فصمل سمائل كثافتمف
NS/m2 is separated from particles of density فمي فممرا ت طممرد مركم1461 kg/m3 ممن دقممائق كثافتهمما
1461 kg/m3 in a centrifuge shown in Fig 10.10. احسممل قطممر أكبممر دق قممة. 1..1. ابعادهمما مب نممة فممي الشممكل
Calculate the diameter of the largest particle 23000 اذا كانت سرمة الدوران, تتمكن الخرو من الفرا ت
that can escape from the centrifuge. The speed 7.87 x 10-7 m3/s دورة ف الد يقة ومعدل الجر ان
of rotation is 23000 rpm (revolution per
minute) and the flow rate is 7.87 x 10-7 m3/s.
ri
514
PARTICLE MECHANICS 10 ميكانيك الدقائق
Solution الحل
Given:
: المعلور
Find:
: المطلول
The largest particle size dp that can be
separated in the centrifuge تمكن الجها فر هاdp ا جاد قطر أكبر دق قة
We apply equation (10.53):
ω= N
t = V/Q
V = π b (R2 – ri2)
V = 2.747 x 10-4 m3
t = 343.074 s
515
PARTICLE MECHANICS 10 ميكانيك الدقائق
343.074 = ln
When a fluid is passed through a porous packed مند تمر ر المائس خمالل طبقمة مسمام ة مكونمة ممن دقمائق صملبة
bed of solid particles at a low velocity, the و عمد, من االسفل لى األملى بسرمة واطئة تبقى الدقائق ثابتمة
particles remain in a fixed state. The flow is و حسمل مقمدار, الجر ان جر انما ً امت اد م خمالل الطبقمة الثابتمة
considered as normal flow through a porous هبوط الضغط ممن قمانون ا ركمون المذ ممر شمرحف فمي الفصمل
medium; the Ergun method is applied to ولكممن اذا ممدت سممرمة الجر ممان خممالل الطبقممة م داد. التاسممس
evaluate the pressure drop. However, as the مقممدار هبمموط الضممغط ثممر الحمما منممد سممرمة مع نممة ان الممدقائق
اصبحت تتحرك ا اء بعضها مضطربة و ك نها سمائل فمي حالمة
velocity is increased, the pressure drop also
. فتعلر ان الطبقة تحولت لى طبقة متميعة, الغل ان
increases and some movement of particles will
be noticed. Increasing the velocity further will
cause the bed to expand. Higher velocity will
result in a turbulent motion of the particles,
similar to a boiling liquid, and therefore the bed
is said to be a fluidised bed.
If a quantity of fine sand is placed in a glass tube اذا وضعت كم ة من الرمل النامر في أنبمول جماجي ثبمت فمي
with a perforated base that allows for the قامدتف صف حة مثقبة تسم لمرور الهواء دون الرمل كما مبم ن
passage of air only, we get what is known as a و. نحصمل ملمى طبقاة ثابتاة ممن الممدقائق, 1..11 فمي الشمكل
fixed bed of particles, see Fig 10.11. بتمر ممر كم ممة مممن الهممواء مممن االسممفل بسممرمة جر ممان مت ا ممدت
Furthermore, we can plot a curve depicting مكن رسر منحن ا ً لهبوط الضغط ضد سرمة جر ان الهواء كمما
. 1..12 هو مب ن في الشكل
pressure drop verses the velocity of air by
increasing the upward flow of air through the
Fixed bed
bottom plate, as shown in Fig 10.12. طبقة ثابتة
Fluidised bed
طبقة متم عة
Fine sand
رمل نامر
11011 الشكل
Fig 10.11 Air
Air
هواء هواء
516
PARTICLE MECHANICS 10 ميكانيك الدقائق
Note the linear relationship OA of the pressure ملمى المنحنمى التمي تمثمل مالقمةOA و الحا العالقة الخط مة
drop with velocity through the fixed bed. . هبوط الضغط بسرمة الجر ان خالل الطبقة الثابتة
O
Log - ∆P C F
D Q
umf
Log uf
Fig 10.12 Pressure drop through a fluidised bed هبوط الضغط خالل الطبقة المتم عة11011 الشكل
Careful examination of the bed reveals that the A وح ن ن راقل الطبقمة بعنا مة نالحما ان المدقائق منمد النقطمة
particles at A will start to move and the surface وهنمما اصممبحت قمموت,بممدأت تتحممرك وأخممذ سممط الطبقممة ترتممل
becomes uniform. At this point the pressure وان أ. الضممغط مسمماو ة لقمموت الجاذب ممة المممبثرت فممي الممدقائق
force equals the gravity force acting on the مممادت الحقمممة بالسمممرمة سمممتبد لمممى تممممدد ملحممموا بالطبقمممة
particles. Any further increase in velocity will كما تصب ال مادت بهبموط الضمغط, مصحوبا ً ب ادت المسامية
result in the expansion of the bed which is تكمون الطبقمة فمي حالمةB ومنمد النقطمة. اقمل ممما كانمت مل مف
accompanied by an increase in the porosity and مفككة ثر بعدها تنفصمل المدقائق بعضمها ممن بعمض ف بمدأ التم مس
a decline in the pressure drop. At B, the bed is . F لمىB و نخفض مادت هبوط الضغط ممن النقطمة, الحق قي
found to be in a loose state and the real تم داد حركمة المدقائق منفما ً وترتفمس فقامماتF ومن بعد النقطمة
fluidisation commences; consequently, the فتنفجر مند السط مما جعل الطبقة المتم عة مشابهة لسائل في
pressure drop is reduced from the point B to F. اما اذا خفضمت سمرمة الجر مان ممن حالمة التم مس. حالة الغل ان
ف الحا ان الطبقة تسمتع د وضمعها االبتمدائي ولكمن تبعما ً للخمط
Beyond point B, the motion of the particles will
. CD
be more violent and bubbles start to rise to the
surface of the bed. At the surface, the bubbles
break up causing the bed to appear as boiling
liquid. However, if the flow velocity is decreased
below the fluidisation value, the bed will revert
to the original state according to the line CD.
517
PARTICLE MECHANICS 10 ميكانيك الدقائق
Note that the reason for the decrease in مادت فمي و ع ى انخفماض مقمدار هبموط الضمغط لمى حصمول
pressure drop is the increase in porosity of the . مسام ة الطبقة الثابتة بعد مرورها في حالة التم س
fixed bed after being fluidised. فالمممائس س م حملP اممما اذا ممدت السممرمة لممى ممما بعممد النقطممة
If the velocity is increased beyond P, the fluid و صممب. الممدقائق ثممر حصممل جريااان متاازامن لكممال الطممور ن
will carry the particles and the simultaneous ح ن تقتمرلPQ هبوط الضغط متبعا ً العالقة الممثلة بالمنحنى
flow of both phases will prevail. The pressure . Q ق مة المسام ة لى الواحد من النقطة
drop is then depicted by the curve PQ where
the porosity approaches 1 at point Q.
If fluidisation takes place in a narrow pipe, the و في حالة تم س طبقة في انبول ضم ق المقطمس تمبد السمرمة
high velocity may cause the particles to stick العال ممة أح ان ما ً لممى التصمماق الممدقائق بعضممها بممبعض فترتفممس فممي
together, forming rings rising up the pipe. The ثر تتفكمك و, االنبول ملى شكل حلقات تعقبها حلقات من الغا
rising rings, accompanied by gas rings will then . وهذا جعل ممل ة التم س متذبذبة وغ ر مستقرت, تهبط الدقائق
break down and the particles will fall down the
pipe. This action results in a fluidisation process
which is pulsating and unstable.
518
PARTICLE MECHANICS 10 ميكانيك الدقائق
Froude number, given as (umf/g dp), is used to ًمع مارا (umf2/g dp) و عطي ر م فارود المعمرة بالصم غة
indicate the type of fluidisation. The minimum همي أقمل سمرمة حمدن منمدها التم مسumf ح من, لنوم التم س
velocity for the onset of fluidisation, denoted as محسوبة ملى اسا المقطس العرضي للطبقة ب كملها التي تدمى
umf, is based on the whole cross section area of . سرعة التميع الدنيا
the bed; it is known as the minimum fluidising
velocity.
dp is the particle diameter (or size) هو قطر الدقائقdp
g is the gravity هو التعج ل الجاذبيg
If Froude number is less than 1, the fluidisation فمماذا كانممت ق مممة رقممر فممرود اصممغر مممن الواحممد س م حدن تم ممس
is classified as particulate; if it is greater than 1, . أما اذا كانت أكبر من الواحد فس حدن تم س متجمس, دقائقي
it is aggregate.
The porosity of the bed at the onset of تسمى مسام ة طبقة من الدقائق مند بدء تم عهما مساامية التمياع
fluidsation is called the minimum fluidisation و تعتمممد ق متهمما ملممى شممكل و حجممر, εM الاادنيا و رمم لهمما
porosity. It is denoted by εm and its value . ق متها لمواد مختلفة1..13 و ب ن الشكل, الدقائق المتم عة
depends on the shape and size of the fluidised
particles. Fig 10.13 shows the values for
particles of different materials.
0.9
0.8 a
0.7 b
c
0.6
d
εM 0.5
e
0.4
0.3
0.2
0.1
0
0 0.0025 0.005 0.0075 0.01 0.0125 0.015
dp
( مسحو الزجاجd) Crushed Raschig rings ( حجقا راشك مكسرةc ) Carbon used for adsorption ( الكاربون المست دم الغراض االمتزازb) brick ( الطابوa)
Spherical sand particles ( د ائ رمل كرويةe) Glass & coal powder و الفحم
If the height of a fluidised bed is L and its وكمانε ومسمام تهاL اذا كان ارتفام طبقة الدقائق المتم عمة
porosity is ε and the height of the bed without L0 أ بممدون مسممام ة, ارتفممام الطبقممة فممي مممدها كتلممة صمملبة
pores as a solid mass is given by L0, the porosity : ف مكن تعر ة المسام ة
can be defined as follows:
ε= =1- (10.54)
If the initial value of the porosity of a fluidised L1 و ارتفامهمماε1 و فممي حالممة معرفممة مسممام ة طبقممة متم عممة
bed is known as ε1 and its height L1, we can then مند تغ مر المسمام ة لمى قم ر جد مدتL2 نستط س حسال االرتفام
estimate the height L2 when the value of the : حسل المعادلة اآلت ةε2
porosity changes to ε2 as follows:
= (10.55)
At the onset of fluidisation, the pressure force منممد حممدون التم ممس تصممب قمموت الضممغط مسمماو ة قمموت الجاذب ممة
will be equal to the gravity force minus the : ناقصا ً قوت الطفو للطبقة أ أن
buoyancy force, thus:
(- ∆P) A = (1 – ε) L A s g - (1 – ε) L A
520
PARTICLE MECHANICS 10 ميكانيك الدقائق
(- ∆P) = (1 – ε) L ( s - )g (10.56)
The pressure drop across a fixed bed is given by تعطمي معادلممة كمو ني مقممدار هبموط الضممغط مبمر طبقممة دقممائق
the Kozeny equation, which is: : ثابتة وهي
∆
u= (Eqn. 9.15)
The above equation can be applied to a ً بمدالL و مكن تطب ق هذه المعادلة ملى طبقمة متم عمة ارتفامهما
fluidised bed having a height of L instead of l.
ومنumf وبالتعو ض من السرمة بسرمة التم س الدن ا, l من
Furthermore, it is required to substitute the
(6/dp) بالمقمممدارS ( وممممن1..56) ( ممممن المعادلمممة- ∆P)
velocity by the minimum fluidising velocity umf,
نحصل ملىεM بالمسام ةε ومن, بامتبار الدقائق كرو ة
the pressure by (- ∆P) of equation (10.56), S by
(6/dp) and ε by εM, to obtain the following
If we consider 0.4 as an average value for the أل طبقمممة..4 تسممماوεM واذا ممممدت ق ممممة المسمممام ة المممدن ا
minimum porosity εM, equation (10.57) will : ( لى1..57) فستختصر المعادلة, كق مة وسط ة, متم عة
then be reduced to:
Note that the use of Kozeny equation implies عنمي أن الجر مان و تجدر مالحاة استخدار قانون كو ني الذ
that the flow across the particles is streamline. . ً مبرالدقائق انس اب ا
521
PARTICLE MECHANICS 10 ميكانيك الدقائق
However, if the particles are relatively large, اما اذا كانت المدقائق كب مرت الحجمر نسمب ا ُ فماألمر سمتل ر معادلمة
Ergun equation (9.26), which covers streamline التمممي تشممممل الجر مممان األنسممم ابي و9.26 ايركاااون المرقممممة
and turbulent flow, will be applied so that we : ح ن تصب المعادلة, األضطرابي
will have:
∆
= 150 + 1.75 (10.59)
∆ ∆
We use equation (10.56) to substitute ( ) in ( في المعادلة1..56 ) ( من المعادلة ) نعوض من
equation (10.59) then we multiply the two sides :( ونضرل طرفي المعادلة بالمقدار1..59)
by:
ε
:فنحصل ملى
We get:
= 150 - + ( )2 (10.60)
(10.60)
= Ga
= 150 - + ( )2
We also have: : و أن
(10.60)
= ReM
522 = 150 - + ( )2
(10.60)
PARTICLE MECHANICS 10 ميكانيك الدقائق
Ga is the Galileo number and ReM is the همممو رقمممر ر نولمممد منمممدReM همممو رقمممر غمممال ل و وGa ح ممن
Reynolds number at the onset of fluidisation; ( نحصل10.60) وبالتعو ض في المعادلة, اروة بدء التم س
substitution in equation (10.60) gives: : ملى
∆
= 150 + 1.75 1..62
ε eno e the porosity at any given value of وفممي. uf مسممام ة الطبقممة المتم عممة منممد سممرم التم ممسε وهنمما
fluidisation velocity uf. Since the size of the التطب قات الصنام ة كون حجر الدقائق صمغ راً وسمرمة التم مس
particles in many industrial applications is very واطئة لذا مكن اهمال الحد الثماني فمي الطمرة األ ممن للمعادلمة
small, the second term, in the left hand side of : (10.62)
equation (10.62), can be ignored to arrive at:
∆
= 150 1..63
∆ ∆
Substituting ( ) using equation (10.56): : (1..56) ( من المعادلة ) نعوض من
(1 – ε) ( s – ρ) g = 150
523
PARTICLE MECHANICS 10 ميكانيك الدقائق
ε
uf = ( s – ρ) (10.64)
ε
Equation (10.64) shows how the velocity is ( مالقمة السمرمة بالمسمام ة أثنماء ممل مة1..64) تبم ن المعادلمة
related to porosity during fluidisation. ولما ملر ان المسام ة تعك مدى تمدد الطبقة لذا مكن, التم س
Meanwhile, the value of the porosity indicates . تطب ق المعادلة لتخم ن مقدار تمدد الطبقة
the extent of bed expansion and therefore the
equation can be used to estimate the expansion
of the bed.
It is worth noting that fluidisation ends as soon و تجدر المالحاة ب ن ممل مة التم مس تنتهمي حم ن تصمب سمرمة
as the velocity of the fluid exceeds the terminal المائس أكبر من سرمة السقوط النهائ ة للدقائق ح من تبمدأ مندئمذ
falling velocity of the particles; the و مكمن تخمم ن سمرمة السمقوط النهائ مة. ممل ة انتقال الاد ائ
transportation of particles will then begin. If we ( اذا1..24 ) ملممى اسمما قممانون سممتوك باسممتخدار المعادلممة
assume streamline flow across spherical افتممرض ان الجر ممان مبممر الممدقائق انسم ابي وان الممدقائق كرو ممة
particles, the terminal falling velocity can be . الشكل
computed by equation (10.24).
524
PARTICLE MECHANICS 10 ميكانيك الدقائق
Solution الحل
Given: : المعلور
Find: :المطلول
Transportation begins when the fluidising ل بمدأ انتقممال الممدقائق منممدما تبلمما سممرمة التم ممس سممرمة
velocity equals the terminal velocity of the 1..24 المعادلة. السقوط النهائ ة
particles.
525
PARTICLE MECHANICS 10 ميكانيك الدقائق
The terminal falling velocity is determined from ن حسمل سممرمة السممقوط النهائ مة للممدقائق مممن المعادلممة
the following equation: : اآلت ة
uT = (1650 – 3.36)
uT = 0.112 m/s
(c) We compute the expansion of the bed ت نحسل تمدد الطبقة مند متوسط السرمة
at an average velocity ((uT + umf)/2) ((uT + umf)/2)
ε
uf = ( s – ρ) Eqn. (10.46)
ε
ε
0.0569 = (1650 – 3.36) x
ε
ε
= 4.22
ε
The porosity is determined by trial and error, it : وبطر قة التجربة والخط نحدد ق مة المسام ة وهي
is:
ε = 0.852
Applying equation (10.55): : (1..55) وبتطب ق المعادلة
526
PARTICLE MECHANICS 10 ميكانيك الدقائق
= 4.05
The answer indicates that, at the onset velocity و همممذا عنمممي ان الطبقمممة تتممممدد منمممد همممذه السمممرمة لمممى اربعمممة
of fluidisation, the height of the bed has . اضعاة ارتفامها األصلي مند بدء التم س
expanded 4 times.
Fr =
Fr = = 0.0066
The value of the Froude number is less than 1, لمما كانمت ق ممة رقمر فمرود اصممغر ممن الواحمد لمذا حصمل تم ممس
therefore the fluidisation is of the particulate . دقائقي
type.
Exercise تمرين
Solve example 10.7 using Excel. . 1..7 استخدر اكسل لحل المثال
527
PARTICLE MECHANICS 10 ميكانيك الدقائق
The fluidisation process is also useful in heat ستفاد من ممل ة التم س في مجاالت انتقال الحرارت ح من تمتلمك
transfer operations. The bed provides a uniform و تمتمما بانتاممار, الطبقممة المتم عممة معاماال انتقااال حاارارة مممال
temperature distribution and possesses a . درجة حرارتها
relatively high heat transfer coefficient.
Drying of solid particles is another operation . وتستخدر ممل ة التم س ا ضا ً في تجف ة بعض المواد الصلبة
where fluidisation is very effective.
To improve the efficiency of combustion of ولتحس ن ممل ة احترا الفحر م س مساح ق من الفحمر بتمر مر
coal, the coal-power is usually fluidised by a وقمد وجمد ان االحتمراق, ت ار الهواء بف و حرق بنف الوقمت
stream of air and burned at the same time. بهممذه الطر قمممة حتمما لمممى درجممة حمممرارت اوطمم ممممن الطر قمممة
األمت اد ة كما تنبعن كم ات أقل من الغازا المجوثة مثمل ثماني
This type of combustion requires a lower
. اوكس د الكبر ت
temperature and releases less polluting gases
such as sulphur dioxide.
In the end, we can conclude that fluidization is و ختاممما ً مكممن القممول ان ممل ممة التم ممس مف ممدت ا نممما تسمممتوجل
effective in processes that include contact of ألن, العمل ممات الصممنام ة تماسمما ً بمم ن الغمما والممدقائق الصمملبة
gases with particles. The main reason is the . التم س د مساحة التما ب ن الطور ن لى درجة كب رت
significant increase in contact area between the
two phases.
528
PARTICLE MECHANICS 10 ميكانيك الدقائق
Ans
10.2 Compute the time required for quartz احسل الم من المال ر لترسم ل دقمائق ممن ممادت الكموارت1101
particles to settle, at the terminal falling 2.5 m بسرمة السقوط النهائ ة في وماء حتو ماء بعمق
velocity, in a vessel containing water at a depth
of 2.5 m.
10.3 If the diameter of the largest solid particle اذا ملمت ان قطر اكبر دق قة من مادت صلبة تترسمل فمي1101
that settles according to Stokes law is 0.048 احسمل كثافمة0.048 mm الماء بموجل قانون سمتوك همو
mm, calculate the density of the solid particle. المادت الصلبة
4316 kg/m3
10.4 Evaluate Galileo number for a spherical 0.42 احسل رقر غال ل و لدق قمة كرو مة الشمكل قطرهما1101
particle with a diameter of 0.42 mm and a منممدما تترسممل فممي سممائل7870 kg/m3 و كثافتهمماmm
density of 7870 kg/m3, settling in a petroleum ثمممر0.01 N/sm2 ول وجتمممف820 kg/m3 نفطمممي كثافتمممف
liquid of a density 820 kg/m3 and a viscosity of . احسل سرمة السقوط النهائ ة
0.01 Ns/m2. Also calculate the terminal falling
velocity.
530
PARTICLE MECHANICS 10 ميكانيك الدقائق
10.5 Calculate the mass of a spherical particle همبط7500 kg/m3 احسل كتلة جسر كمرو كثافتمف10.5
with a density of 7500 kg/m3, falling in a vessel 0.56 m/s في وماء مم ق مملوء بالماء بسرمة ثابتة قدرها
full of water at a velocity of 0.56 m/s.
10.6 The separation of particles A from particles باستخدار سمائلB من المادتA تفر دقائق من المادت1101
B is based on the terminal falling velocity in a فماذا. ملى اسا الفرق بمقدار سرمة السمقوط النهائ مة للمدقائق
liquid. If the density ratio of particles A to liquid ونسمبة1.9/1 لى السمائل تسماوA كانت نسبة كثافة المادت
is (1.9/1), and the density ratio of particles B to اثبت ان, 1.35/1 لى كثافة السائل تساوB كثافة المادت
liquid is (1.35/1), show that the ratio of the لمى قطمر اصمغر دق قمة ممنA نسبة قطر أكبر دق قة من الممادت
largest diameter of particles A to the smallest للحصمول ملمى فصمل تمار بم ن دقمائق1.61 تسماوB المادت
diameter of particles B is 1.61. This is to achieve . افترض جر انا ُ انس اب ا ُ مبر الدقائق, المادت ن
complete separation assuming streamline flow
across the particles.
6 x 10-7 m3
10.8 Prove that the relative velocity of a fluid اثبت ان سرعة الجريان النسبية لمائس مبر دق قة كرو مة1101
past a spherical particle is given by: : تعطى من
u0 = √
Calculate the air velocity required to make a ثر احسل سرمة ت ار الهواء الال ممة لمدفس دق قمة صملبة قطرهما
0.0995 m diameter solid particle move upwards . 0.5 m/s لى االملى بسرمة مطلقمة قمدرها0.0995 mm
at an absolute velocity of 0.5 m/s. ( وكثافممة مممادت الدق قممةCD = 5.56) ملم ما ً ان معامممل الجممر
CD = 5.56, density of the particle is 2400 kg/m3, و ل وجتممف1.3 kg/m3 و كثافممة الهممواء2400 kg/m3
density of air is 1.3 kg/m3 and viscosity of air is 1.7 x 10-5 Ns/m2
1. 7 x 10-5 Ns/m2
Ans 1101
10.9 Food particles, mixed with a liquid, are تفممر دقممائق مممن مممادت غذائ ممة مخلوطممة بسممائل بواسممطة10.9
separated in a centrifuge with an external وقطرهمما32 mm فممرا ت طممرد مرك م قطرهمما الخممارجي
diameter of 32 mm, an internal diameter of فماذا كمان قطمر. 100.1 mm وارتفامهما5 mm المداخلي
5 mm and a height of 100.1 mm. The diameter و. 1050 kg/m3 و كثافتهما5 x 10-2 mm المدقائق
of the particle is 5 x 10-2 mm and its density is و ل وجمة السمائل, 103 kg/m3 كثافمة السمائل
1050 kg/m3. The density of the liquid is 103 احسممل معممدل الجر ممان ح م ن تممدور. 1.2 x 10-3 Ns/m2
kg/m3 and its viscosity is 1.2 x 10-3 Ns/m2. . دورت بالدق قة3... الفرا ت بسرمة دوران مقدارها
Compute the flow rate when the centrifuge is
spinning at 3000 rpm.
(a) The height of the sand layer at the ارتفام طبقة الرمل مند بدء التم س أ
onset of fluidisation
(b) The pressure drop in the fluidised bed ل هبوط الضغط في الطبقة المتم عة
(c) The minimum fluidising velocity ت سرمة التم س الدن ا
(d) The velocity at which transportation of ً ن السممرمة التممي حممدن منممدها انتقممال الممدقائق مفترض ما
the particles takes place. Assume هل افتراضك صح ؟, جر انا ً انس اب ا ً مبر الدقائق
streamline flow across the particles. Is the
assumption correct?
Find εM from the curves of Fig 10.12 1..12 من منحن ات الشكلεM أوجد
Ans
532
PARTICLE MECHANICS 10 ميكانيك الدقائق
10.11.1 Discuss the importance of drag forces in اكتممل مممن اهم ممة قمموى الجممر فممي حسممابات تصممم ر1101101
the design of aircraft. . الطائرات
10.11.2 List the different types of separators ممما هممي انمموام اجه م ت فصممل الممدقائق الصمملبة مممن1101101
used to separate solid particles from fluids. أكتل من اهمر المجماالت الصمنام ة التمي تشمتمل ملمى. الموائس
Write about the most important industry that معالجة خالئط الصلل والسائل
involves slurry treatment
10.11.4 Describe the solid-liquid separation in اكتممل شممرح تفصمم ل ممممن ممل ممات فصممل الممممواد1101101
the food industry الصلبة من السوائل في مجال الصنامات الغذائ ة
10.11.5 Use the internet to conduct research on استخدر االنترنت الجراء بحث من التطب قات العمل ة1101101
the practical applications of fluidisation .لعمل ة التمبس
533
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
When you complete this chapter you should be able to: :بعد االنتهاء من دراسة هذا الفصل ستتمكن من
1. Derive the continuity equation and solve اشتتتقام معادلتتة االتصتتال محتتل المستتا ل ذا.1
relevant problems العالقة
2. Develop and apply the Navier-Stokes ستمكس- اشتقام متطبيم معادال نافير.2
equations
3. Understand boundary layer analysis فهم تحليال الطبقة المتاخمة .3
4. Solve boundary layer equations by the Blasius حتتتتل معتتتتادال الطبقتتتتة المتاخمتتتتة بطريقتتتتة .4
method بالسيمس
5. Apply Von Karman analysis to the boundary تطبيتتتم تحلتتتيال فتتتمن كتتتارمن فتتتي الطبقتتتة .5
layer المتاخمة
6. Understand turbulence and solve relevant فهم ظاهرة اضطراب الجريان محل المستا ل .6
problems ذا العالقة
7. Develop a velocity distribution equation using اشتقام معادلة تمزيع السرعة بطريقتة طتمل.7
the mixing length theory االمتزاج
534
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
In chapter 4, we developed a number of درسنا في الفصتل الرابتع معتادال اشتتق علتس استاس ممازنتة
equations based on mass, energy and الكتلتتة مالطاقتتة مالتتزخم فتتي حجتتم التتتحكم مالحظنتتا بتتان حتتل
momentum balances. We noted that, to solve مسا ل جريان المما ع يستلزم معرفة ظرمف المتا ع فتي نقطتتي
fluid flow problems, it is imperative to know the دخمله مخرمجه من حجم التحكم مكان تلك المعادال مفيتدة
مهنتا. جداً لتخمين هبمط الضغط متمزيع السرعة فتي االنابيتب
fluid condition at both the inlet and the exit of
ستتنتعرإ ىلتتس اشتتتقام معتتادال تفاضتتلية شتتاملة علتتس استتاس
the control volume. The equations were useful
الممازنة أيضا ً ملكن في حجم تحكم متناهي الصغر يسمس حجم
to estimate the pressure drop and velocity
مستتتمن هتتذا المعتتادال مستتيلة لتخمتتين. الممكحك الكفايمم
distribution in pipes. In this chapter we will
التغيرا التي ستطرأ علس خماص الما ع اثناء جريانه مكذلك
develop differential equations of a general يمكن تبسيط المعادلة التفاضلية لتال م أي مسألة مطلمب حلهتا م
nature; these will be based on balances in ذلتتك بحتتذف متتا هتتم ميتتر مهتتم منهتتا مسنمضتت ايض تا ً كيتتف
a differential control volume. The equations تستتتخدم هتتذا المعتتادال التفاضتتلية فتتي تحلتتيال الجريتتان فتتي
will provide a method of estimating the changes . ً الطبقة المتاخمة سماء أكان اضطرابيا ً أم طباقيا
in the properties that may occur during the fluid
flow. The differential equations can also be Control volume
simplified to suit the problem under study; this
is usually done by neglecting the irrelevant
terms. We will also show how these equations IN OUT
can be applied to the analysis of the flow in the
turbulent or laminar boundary layer.
(mass flow rate in) – (mass flow rate out) = ( معتتتدل جريتتتان الكتلتتتة الداخلتتتة ) – ( معتتتدل جريتتتان الكتلتتتة
(rate of accumulation in the control volume) ) الخارجة ) = معدل تجمع الكتلة في حجم التحكم
535
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
(ρ uz) ∆z
(ρ uy) ∆y
(ρux)x (ρ ux) ∆x
∆z
y
y ∆y
y ∆x (ρuy)y
(ρuz)z y
Fig 11.1 Infinitesimal control volume حجم التحكم متناهي الصغر1111 الشكل
.
The rate of mass accumulation is: : المعدل الزمني لتجمع الكتلة هم
(ρ ∆x ∆y ∆z)
The in-mass flow rate in the x direction across عبتر الستطx معتدل جريتان الكتلتة الداخلتة باالتجتاة
the surface (∆y ∆z) is: : (∆y ∆z)
ρ ux|x ∆y ∆z kg/s
The out-mass flow rate in the x direction across عبتر الستطx معتدل جريتان الكتلتة الخارجتة باالتجتاا
the surface (∆y ∆z): : (∆y ∆z)
536
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The in-mass flow rate in the y direction across عبتتتتر الستتتتطy معتتتتدل جريتتتتان الكتلتتتتة الداخلتتتتة باالتجتتتتاا
surface (∆x ∆z): : (∆x ∆z)
ρ uy|y ∆x ∆z
The out-mass flow rate in the y direction across عبر السط y معدل جريان الكتلة الخارجة باالتجاا
surface (∆x ∆z): : (∆x ∆z)
ρ uy|y +∆y ∆x ∆z
The in-mass flow rate in the z direction across عبتتتر الستتتطz معتتتدل جريتتتان الكتلتتتة الداخلتتتة باالتجتتتاا
surface (∆x ∆y): : (∆x ∆y)
ρ uz|z ∆x ∆y
The out-mass flow rate in the z direction across عبتتتر الستتتطz معتتتدل جريتتتان الكتلتتتة الخارجتتتة باالتجتتتاا
surface (∆x ∆y): : (∆x ∆y)
ρ uz|z +∆z ∆x ∆y
We now substitute in the mass balance : ماآلن نعمإ في معادلة ممازنة الكتلة
statement:
537
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Dividing the equation by (∆x ∆y ∆z) and ∆ ) ماعتادة ترتيبهتا نحصتلx ∆y ∆z( مبتقستيم المعادلتة علتس
rearranging, we obtain: : علس
∆ ρu ρu ∆ ∆
+ + = (11.2)
∆ ∆ ∆
∆ ρu ρu ∆ ∆
+ + =
∆ we
If the values of ∆x, ∆y∆and ∆z approach zero, نحصتل علتس
∆ ∆ ) متن الصتفرx , ∆y , ∆z) معندما تقترب قيم
obtain the differential
(11.2) continuity equation as : معادلة االتصال التفاضلية بالصيغة اآلتية
follows:
( ( (
=-[ + + ] (11.3)
Velocity is a vector quantity and therefore we مالمعلمم ان السرعة هي كميتة متجهتة لتذا يمكتن كتابتة المعادلتة
can write equation (11.3) in the following : ( علس النحم اآلتي1113)
format:
=∇.ρu (11.4)
∇ is “div” u
ρ ρ ρ
=-ρ( + + ) – ( ux + uy + uz ) (11.5)
538
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Equation (11.5) can be rearranged as follows: : ( علس النحم اآلتي1115) م يمكن ترتيب المعادلة
ρ ρ ρ
+ ux + uy + uz =-ρ( + + ) (11.6)
+ + = ∇.u (11.8)
Substituting in equation (11.6) leads to: : ( بعد التعميإ1116 ) اذن تصب المعادلة
+ ρ (∇.u = 0 (11.9)
A fluid flows over a plate surface in the x ينساب ما غ مير انضغاطي فمم ستط صتفيحة معينتة باالتجتاا
direction. If the velocity in the z direction is ً مهملة أجر تحليالً مستخدماz فاذا كان السرعة باالتجاا. x
negligible, conduct an analysis based on the . معادلة االتصال
continuity equation.
539
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Solution الحل
Since the fluid is incompressible, the density will لما كان الما ع مير انضغاطي لذا تكمن الكثافة ثابتة المقتدار أي
be constant and therefore: : أن
=0
ρ (∇.u = 0
ρ( + + )=0 (11.10)
The velocity in the z direction is zero, thus تستتامي صتتفراً اذن تصتتب المعادلتتةz م لكتتن الستترعة باالتجتتاا
equation (11.10) will change to: (11111)
+ =0 (11.11)
∴ =- (11.12)
540
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
(momentum out) – (momentum in) + (rate of ( معتدل+ ) ( معتدل التزخم التداخل- ) ( معدل الزخم الختارج
accumulation of momentum) = (net forces تجمع الزخم ) = ( مجمتل القتمى الخارجيتة المت ثرة علتس حجتم
acting on the control volume) .) التحكم
Momentum is transferred through a control يتم نقل الزخم خالل حجم التحكم بطريقتين هما االنكقال بالحممل
volume by two methods; one is called واالنكقال الجزيئ مسنجري ممازنة لحجتم التتحكم المبتين فتي
convection transport and the other is molecular . تخص انتقال الزخم بكال الطريقتين1111 الشكل
transport. We will apply the two methods to
perform a balance for the control volume
shown in Fig 11.1.
ρ ux ux |x ∆y ∆z
Note that the rate of momentum transfer is م تجتتتدر المالحظتتتة بتتتان معمممدل انكقمممال المممزخ يستتتامي معتتتدل
equal to the mass flow rate multiplied by the . الجريان الكتلي مضرمبا ً بالسرعة
velocity.
ρ ux ux |x+∆x ∆y ∆z
541
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The rate of transfer of the momentum ( بالحمتل الداخلتة ىلتس حجتمρ ux ) معتدل انتقتال مركبتة التزخم
component (ρ ux) entering the control volume, : (∆x ∆z) عبر السطy التحكم باالتجاا
by convection, in the y direction across surface
(∆x ∆z) is:
ρ uy ux |y ∆x ∆z
ρ uy ux |y+∆y ∆x ∆z
The rate of transfer of the momentum ( بالحمتل الداخلتة ىلتس حجتمρ ux ) معتدل انتقتال مركبتة التزخم
component (ρ ux) entering the control volume, : (∆x ∆y) عبر السطz التحكم باالتجاا
by convection, in the z direction across surface
(∆x ∆y) is:
ρ uz ux |z ∆x ∆y
ρ uz ux |z+∆z ∆x ∆y
Hence, the net transfer of the momentum : ( الصافي همρ ux) اذن مقدار انتقال مركبة الزخم
component (ρ ux) is:
[ρ ux ux |x ∆y ∆z + ρ uy ux |y ∆x ∆z + ρ uz ux |z ∆x ∆y]
[ρ ux ux |x - ρ ux ux |x+∆x ] ∆y ∆z + [ρ uy ux |y - ρ uy ux |y+∆y ] ∆x ∆z
+ [ ρ uz ux |z - ρ uz ux |z+∆z] ∆x ∆y (11.13)
542
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Fig 11.2 shows the stresses, associated with the االجهادا الم ثرة فتي حجتم التتحكم1112 يمض الشكل
momentum component in the x direction, . x التي تخص مركبة الزخم باالتجاا
acting on the control volume.
z τzx|z+∆z
τyx|y+∆y
τxx|x τxx|x+∆x
τyx|y
τzx|z
y
x
Fig 11.2 Stresses acting on the control volume االجهادا الم ثرة في حجم التحكم1111 الشكل
It is well known that shear stresses arise due to ممتتن المعتترمف ان اجهتتادا القتتص تنشتتأ نتيجتتة تتتأثير القممو
the effect of the viscous forces1 Newton’s ال زجة في الما ع الجاري متعطس عادة من قانمن نيمتن الذي
viscosity law is used to evaluate such stresses, : ًيعنس باللزمجة فمثال
for example:
τzx = - μ (11.14)
The significance of equation (11.14) can be ( بالمعلممة بتأن طبقتة11114) م يمكن تفسير مغزى المعادلة
explained by the fact that the fluid layer at ( تمتلتتك مقتتداراً معين تا ً متتن التتزخمz = 0) المتتا ع فتتي الممقتتع
(z = 0) possesses an amount of momentum in . x باالتجاا
the direction x.
543
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
As z increases in value, the layer passes some of z مانها تعطي جزءاً منه ىلتس الطبقتة المجتامرة أي عنتد ازديتاد
the momentum to the next layer to keep it مهتتذا يعنتتي ان. x مذلتتك قبقاءهتتا فتتي حالتتة الجريتتان با تجتتاا
flowing in the x direction. This implies that the x م. x تنتقل في الما ع الجاري باالتجتااx مركبة الزخم باالتجاا
component of momentum is transmitted within لمركبتةz با تجتاا كفميτzx عليه يمكن عتد اجهماد القم
the flowing fluid in the x direction. Thus we can .الزخم مهنا يقصد بالفيإ الزخم لمحدة المساحة
consider the shear stress τzx as a flux for the z
component of momentum. In fact, the term flux
means momentum per unit area.
Reverting to momentum balance for molecular ماآلن نعمد ىلس ممازنة الزخم المنتقتل بطريقتة ا نتقتال الجز تي
transfer across the control volume, we have: : عبر حجم التحكم
The rate of transfer for the x component of الداخلتة ىلتس حجتم التتحكمx معدل انتقال مركبة الزخم با تجاا
momentum entering the control volume in the : (∆y ∆z) عبر السطx باالتجاا
x direction across surface (∆ ∆ is:
τxx|x ∆ ∆
τxx|x+∆x ∆ ∆
The rate of transfer for the x component of الداخلتة ىلتس حجتم التتحكمx معدل انتقال مركبة الزخم باالتجاا
momentum entering the control volume in the : (∆ ∆ عبر السطy باالتجاا
y direction across surface (∆x ∆z)is:
τxx|y ∆x ∆z
τxx|y+∆y ∆x ∆z
The rate of transfer for the x component of الداخلة ىلس حجتم التتحكمx معدل انتقال مركبة الزخم باالتجاا
momentum entering the control volume in the z : (∆ ∆ عبر السطz باالتجاا
direction across surface (∆ ∆y)is:
τxx|z ∆x ∆y
544
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
τxx|z+∆z ∆x ∆y
Thus the net momentum transfer will be: : اذن المقدار الصافي للزخم المنتقل
(c) Forces acting on the control volume (ت) القو المؤثرة ف حج الكحك
The forces, due to pressure and gravity, act on ت ثر قمى الضغط مقمى الجاذبية فتي جستيم المتا ع باالتجاهتا
the element of the fluid in three directions. The علتسx الثالثة ميمكن حساب صاف القو الم ثرة باالتجاا
net force acting in the x direction can be : النحم اآلتي
computed as follows:
(
∆x ∆ ∆ (11.17)
545
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Combining equations (11.13, 11.15, 11.16 and م11116 م11115 م11113) ماآلن نعتتتتتتتتمإ المعتتتتتتتتادال
11.17) with the momentum balance equation, ( فتتتي معادلتتتة ممازنتتتة التتتزخم م نقستتتم طرفتتتي المعادلتتتة11117
dividing the two sides of the resulting equation الناتجة علس ∆ ∆ ∆( ثم نحملها ىلس الصيغة التفاضلية
by (∆ ∆ ∆ and converting it to the : باعتبار ∆ ∆ ∆( تقترب من الصفر فنحصل علس
differential form by assuming (∆x ∆y ∆z)
approach zero, we obtain:
( ( ( (
=-[ + + ]-[ + + ]- + ρ gx (11.18)
Following similar steps, we can develop م باتبتتان نفتتتس الخطتتما نستتتتطيع اشتتتقام معتتتادال تفاضتتتلية
differential equations for the y and z : فنحصل علسz مy لمركبتي الزخم باالتجاهين
components of the momentum to get:
( ( ( (
=-[ + + ]-[ + + ]- + ρ gy (11.19)
( ( ( (
=-[ + + ]-[ + + ]- + ρ gz (11.20)
( ( ( (
=-[ + + ]-[ + + ]- + ρ gz
Combining the continuity equation (11.3) with ( نستتطيع11.18) ) مع المعادلة1113( مبدمج معادلة االتصال
(
equation (11.18), we obtain the flow equation
(11.20) : x الحصمل علس معادلة الجريان باالتجاا
in the x direction as follows:
=-[ + + ] + ρ gx - (11.21)
546
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
We can develop two more equation for the )11121( ميمكتتن الحصتتمل علتتس معتتادلتين ممتتاثلتين للمعادلتتة
dimensions y and z similar to (11.21). Now, مبجمع المعادال نحصل علس معادلتة جريتانz مy لالتجاهين
combining the resulting equations will actually : عامة بالصيغة اآلتية
give a general flow equation in the following
format:
ρ ∇ - ∇.P + ρ g
= - [ ∇.τ] (11.22)
Equations (11.18 and 11.22) can be applied to ( ي متا ع كتان بغتإ11.22 م11111) نطبتم المعتادال
any fluid, regardless of the type of relationship النظرعن نمن العالقة بين اجهتاد القتص متتدرج السترعة مقتد
between the shear stress and velocity gradient. مجتتد ان العالقتتا التتتي تختتص المما تتع النيمتنيتتة تتختتذ الصتتيغ
The relationships for Newtonian fluids take the : اآلتية
following forms:
u
τxx = - 2μ + μ (∇.u) (11.23)
u
τzz = - 2μ + μ (∇.u) (11.25)
The relationships between shear stresses and م تعطس العالقا بين اجهادا القص متدرج السرعة بممجب
the velocity gradient are given according to : معادال ستمكس للزمجة علس النحم اآلتي
Stokes equations of viscosity as follows:
u
τxy = τyx = - μ ( + ) (11.26)
u
τyz = τzy = - μ ( + ) (11.27)
547
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
u
τzx = τxz = - μ ( + ) (11.28)
If equations (11.28 – 11.23) are combined with ) فتي المعادلتة11121 - 11123( معنتدما نعتمإ المعتادال
equation (11.21) and also with equations of the نحصتلy , z ( مفتي المعتادال المماثلتة لالتجهتاين11121)
dimensions z and y, we obtain: :علس
u u
ρ = [ 2μ - μ (∇.u)] + [μ( + )]
u
+ [μ ( + ) - + ρgx (11.29)
u u u
ρ = [ 2μ - μ (∇.u)] + [μ( )]
u
+ [μ ( + ) - + ρgy (11.30)
u u u
ρ = [ 2μ - μ (∇.u)] + [ μ( ( )]
u
+ [μ ( + ) - + ρgz (11.31)
548
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Assuming the density and viscosity are : ماذا افترضنا الكثافة ثابتة المقدار مكذلك اللزمجة فسيكمن
constants, we obtain:
∇.u = 0 (11.32)
u
ρ( + ux + uy + uz )= μ( + + )- + ρgx (11.33)
u
ρ( + ux + uy + uz )= μ( + + )- + ρgy (11.34)
u
ρ( + ux + uy + uz )= μ( + + )- + ρgz (11.35)
Combining the above three equations, we التثالث نحصتل علتس الصتيغة العامتة لمعادلتة مبجمع المعادال
obtain the general Navier-Stokes equation: :نافير – ستمكس
ρ = - ∇P + ρ g + μ ∇2 u (11.36)
549
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Solution الحل
550
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The density of the fluid is constant, thus: : مبما ان كثافة الما ع ثابتة المقدار لذا
∇.u = 0 (11.37)
+ + =0 (11.38)
The flow is in the x direction only, therefore ) مuy = 0 ( فقط أي أنx مكذلك ان الجريان في االتجاا
+
(uy = 0) and (uz = 0) and equation (11.38) will be
+ =0 : ( ىلس11131) ) فتختزل المعادلةuz = 0 (
reduced to:
(11.38)
=0 (11.39)
u
ρ( + ux + uy + uz )= μ( + + )- + ρgx (11.40)
u
For steady flow we have: ( = 0 ) , (uy = 0) and ( uy = 0) ( مان = 0) معلس ان الجريان المستتقر فتان
(uz = 0), also ( = 0). Since the velocity ux ) ميتض ايضأ ان = 1 ( ( مكذلكuz = 0) م
u
does not change, ( =0)
, z باالتجتااux ) بسبب عدم تغير السرعة = 0)
u
- ρgx = μ (11.41)
551
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Also, we have (gx = 0) and ( ) is constant ميتترux ( ثابت الن ) ) مالمقتتدارgx = 0 ( مكتتذلك ان
because ux is independent of x, so equation : (11141) مهكذا تصب المعادلة. x معتمدة علس
(11.41) will lead to:
= (11.42)
Integrating equation (11.42), where ( = 0) ( فتي = 0) حيتث يتختذ, (11142) م بمكاملتة المعادلتة
when (y = 0), we obtain: : ) نحصل علسy = 0( حالة كمن
=( )y (11.43)
(11.42)
We then integrate equation (11.43), taking )y = 0( ( عندماux = 0) ) بجعل11143( ثم نكامل المعادلة
(ux = 0) when (y = 0)
ux = ( y2 – y02) (11.44)
At (y = 0), the fluid flows at the maximum ( عنتدما يكتمنux max) م يجتري المتا ع بسترعته العظمتس
velocity (ux max), thus: : اذن, ) y = 0(
ux = ux max [ 1 – ( )2 ] (11.46)
0
552
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
It is evident that equation (11.46) is the velocity ( هي معادلة كوزيع السرعة11146 ) من الماض ان المعادلة
distribution; this equation can be developed in التي يمكن التمصل اليها بطريقة مماثلة الشتقام تمزيع السترعة
a similar manner to the velocity distribution in . في االنبمب المبينة في الفصل الخامس
pipes covered in chapter 5.
Ρ = ρ g - ∇.P (11.47)
∆
The Euler equation can be written for the three علس النحمz , y , x ميمكن كتابة المعادلة ايملر لالبعاد الثالثة
dimensions x, y and z as follows: : اآلتي
u
ρ( + ux + uy + uz ) = ρgx - (11.48)
u
ρ( + ux + uy + uz ) = ρgy - (11.49)
u
ρ( + ux + uy + uz ) = ρgz - (11.50)
Equations (11.48, 11.49 and 11.50), known as ( التتتي تستتمس11151 11141 11141) تستتتخدم المعتتادال
Euler equations, are used to estimate the لتخمتين كوزيمع اليم عنتد الحافتة الخارجيتة. معادال أيتملر
pressure distribution at the outer edge of the ل بقة المكاخمة التتي تنشتأ اثنتاء جريتان المما تع عبتر االجستام
boundary layer created as a fluid flows past a . الصلبة
solid particle.
553
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Fig 11.4 illustrates how the thickness of the كيتتف يتتزداد ستتمك الطبقتتة المتاخمتتة بازديتتاد1114 يبتتين الشتتكل
layer increases as the distance from the plate عتتن حافتتة الصتتفيحة المستتتمية م كتتذلك يتضتت فتتيx البعتتد
edge increases. The figure also shows the . الشكل تغيرا نمط الجريان في الطبقة
change in flow regime within the layer.
Fig 11.4 Boundary layer for the flow of a fluid الطبقتتتة المتاخمتتتة لجريتتتان متتتا ع فتتتمم صتتتفيحة1111 الشمممكل
over a flat plate مستمية
554
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The flow regime, inside the boundary layer, can م يمكتتن تحديتتد نتتمن أم نمتتط الجريتتان فتتي الطبقتتة المتاخمتتة متتن
be determined by the value of the local : المعرف بالمعادلة اآلتيةRex معرفة رقم رينملدز الممقعي
Reynolds number Rex which is defined by the
following equation:
Rex = (11.51)
The experimental results, regarding flow over a مقد بينت التجتارب المختبريتة التتي تختص جريتان المتا ع فتمم
plate, show that: : الصفيحة ان
Transition layer 2 x 105 > Rex <3 x 106 الطبقة متقلبة بين طباقية م اضطرارية
ux + uy = ( + )- (11.52)
ux + uy = ( + )- (11.53)
555
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Note that the terms of equation (11.53) are ( صتتغيرة المقتتدار مقارنتتة11153) ميالحتتظ ان حتتدمد المعادلتتة
small compared to those of equation (11.52), ( فيصتب = 0 ) ( لذا يمكن كتابة11152) بحدمد المعادلة
hence, we can consider ( = 0). As a result, the
( ) مقمدارا كفايم يا ك يما الجزئ ل ي المقدار الكفاي
partial differential pressure ( ) changes to a
( هتتم اآلختتر صتتغير ) مكتتذلك المقتتدار. ) ( أي
total differential ( ). Also, ( ) is small in ( متختزل المعادلة11153) المقدار لذا يمكن اهمال المعادلة
value, thus we can ignore equation (11.53) and : ( ىلس اآلتي11152)
reduce equation (11.52) to:
ux + uy = ( )- (11.54)
The two-dimensional continuity equation for م ان معادلة االتصتال ببعتدين لجريتان المتا ع ميتر االنضتغاطي
the flow of an incompressible fluid over a plate : فمم الصفيحة هي
is:
+ =0 (11.55)
The two equations (11.55) and (11.54) ( المعتتادال االساستتية11155 م11154 ) تشتتكل المعتتادلتين
constitute the basis for the flow analysis inside لتحليل الجريان فتي الطبقتة المتاخمتة مستنبين فيمتا يتأتي كيتف
a boundary layer; we will now show how to . يتم تطبيقها محلها
solve and apply these equations.
556
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
In Fig 11.4, we note that the velocity u∞ is مأن ثابتتة المقتدارu∞ يالحتظ ان السترعة1114 ففي الشكل
constant. Also according to the Bernoulli ( ) يسامي صفراً بممجب معادلة برنملي معليته تختصتر
equation = 0, therefore equation (11.54) is : ( ىلس11154) المعادلة
reduced to:
ux + uy = (11.56)
The continuity equation remains in the same )11155( متبقس معادلة االتصال بصيغتها اي المعادلة
format as in equation (11.55)
: مباستخدام الشرمط الحدمدية اآلتية
Applying the following boundary conditions:
At y = 0 , ux = uy = 0
At y = ∞ , ux = u∞
Blasius converted the two equations (11.55 and ) ىلتس11156 11155) تمكن بالسيمس متن تحميتل المعتادلتين
11.56) to a non-linear ordinary differential معادلممممة كفايمممم ية اعكياديممممة ريممممر خ يممممة محلهتتتتا بطريقتتتتة
equation and solved it using the series solution. ميتستتم الحتتل بتفاصتتيل جبريتتة معقتتدة لتتذا ستتنبين. المكس سممالت
The solution involves a lot of details and hence عنتتدماδ النتتتا ج فقتتط مقتتد أمجتتد ان ستتمك الطبقتتة المتاخمتتة
we will write the results only. He found that the ( يعط تس متتن المعادلتتة0.99 u∞) تستتاميux تكتتمن الستترعة
thickness of the boundary layer δ, when the :االتية
velocity ux is equal to 0.99 u∞, is given by the
following equation:
.
δ= (11.57)
√
ρu
Rex = μ
557
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Thus: : اذن
μ
δ = 5.0 √ (11.58)
ρ u∞
Since the drag force is developed due to تتتنجم قمموة الجممر اثنتتاء جريتتان المتتا ع فتتمم الصتتفيحة بستتببب
friction, when a fluid flows over the plate, عنتدτ0 االحتكتاك فقتط لتذا يمكتن حستابها متن اجهتاد القتص
therefore it can be evaluated from the value of ( مذلتتك باستتتخدام المعادلتتةy = 0) الستتط أي عنتتدما يكتتمن
the shear stress at the surface τ0, that is at : اآلتية
y = 0, using the following equation:
τ0 = μ ( y=0 (11.59)
The solution of equation (11.59) by the Blasius : ( بممجب طريقة بالسيمس هم11151) مان حل المعادلة
method is:
τ0 = 0.33 μ u∞ √ (11.60)
The drag force FD, for a plate with a length of L علتسb م عرضتهاL لصفيحة طملهتاFD م تحسب قمة الجر
and width b, is calculated as follows: : النحم االتي
FD = b ∫ τ d (11.61)
Substituting τ0 in equation (11.61) using ) ثتم11161( ( فتي المعادلتة11161) متن المعادلتةτ0 نعتمإ
equation (11.60) and integrating gives: : نكامل المعادلة الناتجة
FD = 0.664 b √μ u ρ (11.62)
558
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The friction drag coefficient CDf is computed by بممجتتب المعادلتتةCDf م يحستتب معامممل الجممر بسممبب االحككمماك
equation (10.1), which changes for a plate with : اآلتيA ( التي تصب لصفيحة مساحتها1111)
an area of A, to the following:
Substituting the area A in terms of length L and b م العترإL بداللة الطتملA مبتعميإ المساحة
width b; also combining equations (11.63) and (11162) ( فتتي المعادلتتة11163) مكتتذلك بتعتتميإ المعادلتتة
(11.62), we obtain: : نحصل علس
μ
CDf = 1.328 √ u ρ (11.64)
∞
.
CDf = (11.65)
√
11.8 Von Karman analysis of the كحاليممالت ال بقممة المكاخمممة ب ريقممة فمموغ11.8
boundary layer كارماغ
It is evident that the Blasius solution of the من الماض ان حل بالسيمس لمعادال الطبقة المتاخمة محدمد
boundary layer equations is very limited. This is جداً النه يخص الطبقة المتاخمة فمم سط صفيحة مستمية فقط
because it deals with the boundary layer مانه من الصعب جتداً استتخدام هتذا الطريقتة لحتل المعتادال
created over a flat plate surface and not any فقد امحد العالم فوغ كارمماغ طريقتة. فمم سط ذم شكل اخر
other shape. Von Karman developed an تقريبيتتتة تستتتتخدم لتحلتتتيال الجريتتتان الطبقتتتي ام االضتتتطرابي
approximate method to analyse the laminar للطبقتتة المتاخمتتة فتتمم ستتطم مختلفتتة االشتتكال م تستتمس هتتذا
and turbulent flow inside boundary layers . الطريقة كح يالت ككامل الزخ
created over different shapes. This method is
called momentum integral analysis.
559
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Let us consider a small control volume inside لن تختتذ حجتتم تحكتتم صتتغير فتتي الطبقتتة المتاخمتتة كمتتا مبتتين فتتي
the boundary layer, as shown in Fig 11.5. This لغترإ اشتتقام المعادلتة االساستية لطبقتة متاخمتة1115 الشكل
control volume is to be used for the . طباقية ام اضطرابية تنشأ فمم صفيحة مستمية
development of the basic equation for a laminar
or turbulent boundary layer created over a flat
plate.
Fig 11.5 Control volume for the boundary layer حجم التحكم لتحليال الطبقة المتاخمة1111 الشكل
analysis
The fluid enters the control volume through م يخرج خاللA1 يدخل الما ع في حجم التحكم خالل المساحة
area A1 and exits through A2. The mass flow : همA1 مان معدل جريان كتلة الما ع خالل, A2
rate of the fluid crossing A1 is:
∫ ρu d
همA2 م خالل
And the rate across A2 is
∫ ρu d
560
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Thus, the rate of momentum transfer is equal to معليتتته يصتتتب معتتتدل انتقتتتال التتتزخم التتتذي يستتتامي الستتترعة
the velocity multiplied by the mass flow rate : A1 مضرمبة بمعدل الجريان الكتلي المار خالل
through A1:
∫ (ρ u d ux1
The rate of momentum transfer across the ممعدل انتقال الزخم باتجاا الجريان عبر السط العلمي المحتدد
upper surface of the control volume CDEF is همCDEF بحجم التحكم
[∫ ρ u d -∫ ρu d ] u∞
Where u∞ is the velocity of the fluid outside the هي سرعة جريان الما ع خارج الطبقة المتاخمةu∞ حيث ان
boundary layer, thus the rate of momentum : مهكذا يصب معدل تغير الزخم في حجم التحكم
change inside the control volume converts to:
∫ ρu d - ∫ ρu d - [∫ ρ u d -∫ ρu d ] u∞
-τ0 b ∆x = ∫ ρ u d - ∫ ρu d - [∫ ρ u d -∫ ρu d ] u∞ (11.66)
Deleting b and simplifying equation (11.66): : ( نحصل علس11166 ) م تبسيط المعادلةb م بحذف
δ
-τ0 ∆x = ρ [ ∫0 ( u u∞ u dy - ∫ (u u u dy ] (11.67)
561
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
-τ0 ∆x = ρ u∞2 ∆ [ ∫ ( 2
–( ) } dy ] (11.68)
∆[∫ { ( )}
τ0 = (11.69)
∆
As ∆x approaches zero (∆x→0), the equation ∆( ستصتبx→0) أي, ∆ متن قيمتة الصتفرx م حتين تقتترب
will then become: : المعادلة
τ0 = ρ u ∫ ( )d (11.70)
The integration of equation (11.70) depends on ) علتس11171 م تعتمد مكاملة معادلة فمن كارمان ( المعادلتة
the type of relationship of the velocity ux and . أي تمزيع السرعةy مالبعدux نمن العالقة بين السرعة
the distance y, (or commonly known as the
velocity distribution).
11.9 Von Karman solution of the حل معادلمة فموغ كارمماغ ل بقمة المكاخممة1111
laminar boundary layer ال باقية
We will apply the Von Karman equation to the سنطبم معادلة فمن كارمان علتس الطبقتة المتاخمتة الناجمتة عتن
boundary layer created by a fluid flowing over a جريان الما ع فمم سط صتفيحة مستتمية لغترإ المقارنتة متع
flat plate. This is to compare the solution with معادلتة فتمن. 1117 حل بالسيمس الذي مر شرحه فتي الفقترة
that obtained by Blasius in section 11.7. The : كارمان هي
Von Karman equation is:
562
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
τ0 = ρ u ∫ ( )d (Eqn. 11.70)
We assume a velocity distribution in the : نفرإ صيغة معينة لمعادلة تمزيع السرعة م لتكن
following format:
ux = a + b y + c y2 +d y3 (11.71)
At y = 0, u = 0
At y = δ, u = u∞
At y = δ, =0
At y = 0, =0
= b + 2 c y + 3 d y2 (11.72)
=2c+6dy (11.73)
563
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Introducing the boundary condition to the : مبتطبيم الشرمط الحدمدية علس المعادال نحصل علس
above equations gives:
a=0
b=
c=0
d=-
To arrive at the velocity distribution equation, ( فنحصتتل علتتس11171) ثتتم نعتتمإ قتتيم الثماب ت فتتي المعادلتتة
we substitute the constants in equation (11.71) : معادلة تمزيع السرعة اآلتية
as follows:
= ( )- ( )3 (11.74)
We then combine the velocity distribution with )11171( مبعد ذلك نعمإ في معادلة فمن كارمان
the Von Karman equation (11.70)
∫ u [ ( ( ] [1 - ( ) + (δ 3] dy
3
= (11.75)
We also have:
:م لدينا
τ0 = µ ( )y=0
Differentiating equation (11.75) with y=0 مساميا ً الصفرy ( مجعل11175) مبمفاضلة المعادلة
564
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
( )y=0 =
=
Combining the above two equations gives مبجمع المعادلتين اعالا نحصل علس
τ0 = µ (11.76)
Substituting τ0 in equation (11.75) and ( منجتتري مكاملتتة11175) فتتي المعادلتتةτ0 ثتتم نعتتمإ عتتن
integrating, we obtain; : فنحصل علس
= = (u∞2 δ)
Or أم
δ dδ = dx (11.77)
δ = 4.64 √ (11.78)
.
= (11.79)
565
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Following the same steps of section 11.7, we نحصتل1117 التي مر ذكرها في الفقرة مباتبان نفس الخطما
obtain: : علس
CDf = 1.292 √
Or أم أن
.
CDf = (11.80)
√
Comparing equations (11.79) and (11.80) with ( بالمعتادلتين11111 م11171) ميتض متن مقارنتة المعتادلتين
(11.30) and (11.38) reveals small differences in ) مدى نجا هذا الطريقة التقريبية حيث11131 م11131(
the value of the constants, this shows that the . يمجد اختالف بسيط في قيم الثماب فقط
use of the Von Karman approximate method is
valid.
11.10 Turbulence and the boundary االي راب وال بقة المكاخمة11111
layer
In section 5.2 of chapter 5, we explained the متن الفصتل الختامس معنتس الجريتان512 لقد مضحنا في الفقرة
meaning of turbulent flow in pipes. It was االضطرابي فتي االنبتمب مكنتا قتد بينتا بتان رقتم رينملتدز هتم
shown that the Reynolds number defines the مسنتعمم هنا في ظاهرة االضطراب. الذي يحدد نمط الجريان
flow regime. Here, we will discuss the .معالقتها بانتقال الزخم م الطبقة المتاخمة
turbulence phenomenon in detail and establish
the relationship with the boundary layer and
momentum transfer.
11.10.1 The nature of turbulence بيعة االي راب1111111
Throughout the turbulent flow regime, the fluid تترام سرعة الجريان في جميع االتجاها اثناء جريان الما ع
velocity fluctuates in all directions. معليتته تختلتتف السممرعة ال حةيممة عتتن, ً جريان تا ً اضتتطرابيا
Consequently, the instantaneous velocity . مكوس سرعة الجرياغ بالمقدار ماالتجاا
differs from the average velocity in value and
direction.
566
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Fig 10.6 illustrates the instantaneous velocity متع التزمن فتيu تغيرا السرعة اللحظية1116 ميبين الشكل
fluctuations u, for steady and unsteady flow, حتتالتي الجريتتان المستتتقر مالجريتتان ميتتر المستتتقر حتتمل قيمتتة
with time around an average velocity value . u̅ مسطية للسرعة هي
equal to u̅.
u̅ (x,y,z)
u̅ (x,y,z)
t t
Fig 10.6 Velocity fluctuations for turbulent flow السرعة في الجريان االضطرابي ترام1111 الشكل
As an example, the x-dimension velocity ux, can متثالً بداللتة متمستطx باالتجتااux ميمكن تقييم سرعة الجريان
be evaluated in terms of the average velocity u̅ : علس النحم اآلتيux’ ممقدار الترام بالسرعةu̅ السرعة
and the fluctuation value ux’ as follows:
Note that [u̅ (x,y,z) ] is the time-velocity [ هتتم المكوس م الزمن مu̅ (x,y,z) ] متجتتدر المالحظتتة ان
average at the point (x,y,z) which is defined as ( التتذي يعتترف علتتس استتاس التتزمنx,y,z) ل سممرعة فتتي النقطتتة
follows: : كاآلتي
u̅ = ∫ u ( , , , d (11.82)
567
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Where t1 is considered as a long time compared حيتتث ان t1يمثتتل زمن تا ً طتتميالً مقارنتتة بتتالزمن التتذي يستتتغرقه
to the time of the velocity fluctuation at a تتترام الستترعة فتتي تلتتك النقطتتة مان متمستتط مقتتدار التتترام
specified point. In fact the average value of the يسامي صفراً ,أي :
fluctuations is zero, this means:
Turbulence is measured by the intensity of م يقتتاس مستتتمى االضتتطراب بمعرفتتة شممدة االيم راب التتذي
turbulence I which is given by the following يرمز له Iم يعطس من المعادلة اآلتية :
equation:
̅̅̅̅̅
Where (√u ̅̅̅̅̅
u ̅̅̅̅̅) being the root-
u الجمممم ر ̅̅̅̅̅
(√u ̅̅̅̅̅
u حيتتتث يمثتتتتل المقتتتتدار )̅̅̅̅̅
u
mean square of the velocity fluctuations, which الكربيع لمكوس مربع كراوح السرعة مهم كمية ممجبة .
is a positive quantity. يعتمد حدمث ظماهر عديدة علس شدة االضتطراب مثتل التحتمل
The occurrence of many phenomena is في الطبقة المتاخمة مانفصال الجريان عن التخم الصلب بالما ع
influenced by turbulence intensity; a good الجتتاري ,كمتتا يعتمتتد كتتل متتن معامتتل انتقتتال الحتترارة م معامتتل
example is the separation of flow at the انتقتتتال الكتلتتتة علتتتس شتتتدة االضتتتطراب .ميمكتتتن قيتتتاس شتتتدة
boundary and the flow changes that occur االضطراب باستخدام االنيموميكر و الس ك الساخغ .
within the layer. Likewise, the values of heat
and mass transfer coefficients are affected. The
turbulence intensity can be measured by the
hot wire anemometer.
568
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
certainly result in a momentum transfer among ux ( محلu̅ + ux’) ميحسب انتقال الزخم باحالل
the fluid parts. The momentum transfer is فتيuz ( محتلu̅ + uz’) مuy ( محتلu̅ + uy’) م
calculated by substituting (u̅ + ux’) for ux, معادلتتة االتصتتال ممعتتادال نتتافير ستتتمكس التتتي يمكتتن تطبيقهتتا
(u̅ + uy’)for uy and (u̅ + uz’)for uz in the م يعرف اجهاد الق. ً سماء اكان لجريان اضطرابيا ً امطباقيا
continuity equation and the Navier-Stokes : الك للجريان االضطرابي بالمعادلة اآلتية
equations. These equations can be applied to
turbulent and laminar flow. The total shear
stress is defined by the following equation:
du ̅̅̅̅̅̅̅̅
τyx = μ d - ρ u u (11.85)
̅̅̅̅̅̅̅̅
τRe = - ρ u u (11.86)
̅̅̅̅̅̅̅̅
ρ u u is called the Reynolds stress τRe, الذي ينشأ نتيجةτRe ̅̅̅̅̅̅̅̅̅( اجهاد رينولدز
ρ u u ) حيث يمثل
created by the turbulent velocity fluctuations. ترام السرعة في حالتة االضتطراب بينمتا يمثتل المقتدار
du
Whilst (μ ) is considered as a component . ( جزءاَ من اجهاد القص الناجم عن حركة الجزي اμ (
d
of the shear stress due to the motion of the مهنالك معادلة ثانيتة يعترف بهتا اجهتاد القتص باعتبتار اللزمجتة
molecules. There is another shear stress ماالخترى تستتمسμ تضتم جتز ين احتدهما ال زوجمة الديناميمة
: التي تمثل االضطراب مهيμε ال زوجة الدوامية
definition based on the assumption that
viscosity consists of two components, one is the
dynamic viscosity μ, and the other is due to
turbulence known as eddy viscosity με, this
stress is given by the following equation:
̅
τyz = (μ + με) (11.87)
569
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Prantle proposed the turbulence-mixing length مقتتد امجتتد العتتالم برانكممل نظريتتة طتتمل االمتتتزاج التتتي تمتتن
theory which provides a relationship between عالقتتة جبريتتة بتتين اجهتتاد القتتص متمزيتتع الستترعة فتتي حالتتتة
shear stress and velocity distribution to solve االضتتتطراب مباستتتتخدام هتتتذا النظريتتتة يمكتتتن حتتتل المعادلتتتة
the equation. He defined the mixing length l as المذكمرة .لقد عرف العالم برانتل ول االمكزاج lبالبعد الذي
the distance travelled by a small mass of the تقطعه كتلة صغيرة من الما ع من نقطة معينة ىلتس أخترى حيتث
̅
fluid from one point to another accompanied by (lكما هم مبين في الشكل. 1117 تتغيرالسرعة بالمقدار )
̅
a change in velocity (l ), as shown in
Fig 11.7.
y ’ux
l
أي أن
That is
̅
̅u =u
̅ ±l )(11.88
The velocity fluctuation ux' is given by ميتض ان مقتدار التترام بالسترعة ’ uxحستب نظريتة برانتتل
هم
̅
ux’ = ± l )(11.89
570
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Note that Prantle developed the mixing length متجدر االشارة ىلس ان برانتل امجد نظرية طمل االمتزاج علس
theory by comparing turbulence eddies to the اساس التناظر بين دوامات االي راب محركة جزي ا الما ع
motion of the fluid molecules. He proposed the ومكوس م المسممارl حيتتث يالحتتظ التماثتتل بتتين طتتمل االمتتتزاج
mixing length which corresponds to the mean . الحر للجزي ا
free path of the molecules
Prantle indicated that ux’ is proportional to uy’, مىالuy’ البتتتد ان يتناستتتب طتتترداً متتتعux’ م قتتد بتتتين برانتتتتل ان
otherwise the term ρ̅̅̅̅̅̅̅̅
u u will be equal to zero. ( مستتاميا ً الصتتفر ماذا افترضتتنا مستتاماةρ ̅̅̅̅̅̅̅̅
u u اصتتب
Now, if we assume ux’ = uy’ and substitute from ( فتتيمكن كتابتتة11119) معمضتتنا متتن المعادلتتةuy مux’ ’
̅ 2
τRe = ρ l2 ( ) (11.90)
Prantle also assumed that the mixing length مافتترإ برانتتتل أيضتا ً ان طتتمل االمتتتزاج يصتب معتمتتداً علتتس
depends on the distance from the surface, البعتتد متتن الستتط مذلتتك فتتي الجتتزء القريتتب متتن ستتط التتتخم
particularly in the area close to the solid الصلب أي أن
boundary, thus
l=ky (11.91)
k, being a constant, which can be evaluated هم ثاب بدمن ابعاد يتتم تقميمته فتي المختبتر مقتد مجتد انk
experimentally. He found its value for turbulent . 114 قيمته للجريان االضطرابي في االنابيب تسامي
flow in pipes to be 0.4.
We now, substitute l in equation (11.90) using ( في المعادلة11111) من المعادلةl اآلن نعمإ عن
equation (11.91) to get: : ( فنحصل علس11111 )
̅ 2
τRe = ρ k2 y2 ( ) (11.92)
Assuming that the shear stress near the surface مكتذلك يمكتن افتتتراإ بتان اجهتتاد القتص قتترب الستط يستتامي
is that same as that at the surface which is τ0 : : فتصب المعادلةτ0 االجهاد عند السط
571
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
̅ 2
τ0 = ρ k2 y2 ( ) (11.93)
أم ان
Or
̅ √
= (11.94)
u
̅
= (1/k) ln y + C (11. 95)
√τ0 ρ
C is the integration constant; its value was هم ثاب التكامل مقد تم تقميمه مختبريا ً مقد مجد انه يعطتسC
estimated experimentally by the following : بالمعادلة اآلتية
equation:
Where is the kinematic viscosity, = μ/ρ (μ/ρ) ال زوجة الكينماكية التي تسامي حيث يمثل الرمز
Substituting C in equation (11.95), we obtain ( نحصل علتس معادلتة11115 ) في المعادلةC مبالتعميإ عن
the velocity distribution equation: : تمزيع السرعة اآلتية
u
̅ √
= (1/k) ln [ y ( ) ] + 5.56 (11.97)
√τ0 ρ
572
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
u+ = (11.98)
√τ0 ρ
+
The pseudo Reynolds number, denoted y+, is : كاالتيy ميعرف رق رينولدز الوهم الذي يرمز له
defined as follows:
√τ0 ρ
y+ = y (11.99)
Combining equations (11.98 and 11.99) with ) فتتتتتتي المعادلتتتتتتة11111 م11111) مبتعتتتتتتميإ المعتتتتتتادلتين
equation (11.97) leads to: : ) نحصل علس11117(
u+ = ln y+ + 5.56 (11.100)
Nikuradse and Reichardt recorded م قد سجل نيكمورادس ورايخمارت معلممتا مختبريتة تختص
ً الجريان االضطرابي فتي االنابيتب الملستاء مرستما منهتا منحنيتا
experimental data for the turbulent flow in
. 1111 كما هم مبين في الشكلy+ ضدu+ يمثل
smooth pipes and plotted u+ vs. y+ as shown in
Fig 11.8.
573
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
25
C B A
u+
20
15
10
0
1 10 100 1000
y+
Fig 11.8 shows three regions, these are: the المن قة االي رابية ثمA ميتض في الشكل ثالثة مناطم هي
turbulent region A, the buffer region B and the ال بقة الكحكية ال باقيةC بقة كحول أو انكقالية م الثالثةB
laminar sub-layer C. The velocity distribution : مان معادال تمزيع السرعة لهذا المناطم هي
relationships for the three regions are:
(y+ ≥ 30)
(y+ ≥ 30 ≥ 5)
u+ = y+ ( 11.103)
(5 > y+ > 0)
574
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Equations (11.101, 11.102 and 11.103) are ( 111113 م111112 م111111 ) تعتتتتتترف المعتتتتتتادال
known as the universal velocity distribution معادال تمزيع السرعة العام حيث يالحظ التماثل بينهتا مبتين
equations. Note the similarity of these ( التتتي اشتتتق علتتس استتاس نظريتتة111111) صتتيغة المعادلتتة
equations to the format of equation (11.100) مفيما يخص الجريان االضطرابي في االنابيب الخشتنة. برانتل
which was derived from Prantle theory. ( يتخذ قتيم مختلفتة11115) في المعادلةC فقد مجد ان الثاب
Regarding the turbulent flow through rough : بحيث تصب معادلة التمزيع السرعة كاآلتي
pipes, the constant C, in equation (11.95), takes
different values so that the distribution
relationship is modified to:
√
u+ = = { ln y+ +3.4 - ln [ e ]} (11.104)
Blasius proposed an empirical equation for the امجد العالم بالستيمس معادلمة كجريبيمة تصتف تمزيتع السترعة
velocity distribution of a turbulent flow which : للجريان االضطرابي مهي
is:
̅
=( (11.105)
575
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The value of n was found to be 7 for Reynolds مقد مجد ان قيمة nتسامي 7عندما تكتمن قيمتة رقتم رينملتدز
number of 105. Another equation, similar to تستتامي , 105متستتتخدم معادلتتة مماثلتتة للمعادلتتة ) (111115
equation (11.105), defines the velocity تصف تمزيع السرعة في الطبقة المتاخمة مهي :
distribution inside the boundary layer, is:
̅
=(δ )(11.106
To be noted here that u̅ refers to the time متجتتدر االشتتارة ىلتتس أن ̅ uهممو المكوس م الزمن م ل سممرعة
average velocity in the x direction. Blasius باالتجاا , xكتذلك أمجتد بالستيمس معادلتة ثانيتة تختص اجهتاد
proposed another equation for the shear stress, القص هي :
it is:
ymax equals the radius for the flow in pipes, or δ حيتتتث ymaxيستتتامي نصتتتف القطتتتر للجريتتتان فتتتي االنابيتتتب م
for flow over a flat plate. يسامي δللحريان فمم صفيحة مستمية .
The thickness of the boundary layer can be يمكتن ايجتتاد ستمك الطبقتتة المتاخمتتة للجريتان االضتتطرابي فتتمم
estimated by solving the Von Karman equation, سط صفيحة مستمية علتس استاس حتل معادلتة فتمم كارمتان م
which is: هي :
576
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Substituting equations (11.106 and 11.107) into فتتي المعادلتتة ( 111117 م1111116 ) نعتتمإ المعتتادلتين
equation (11.70) leads to: (11171)
∫ u ( (
2
0.0225 u∞ ( = } dy (11.108)
u∞ δ
0.0225 ( = (11.109)
u∞ δ
( x = 3.45 (δ +C (11.110)
Assuming that the turbulent boundary layer ماذا افترضنا ان الطبقة المتاخمتة االضتطرابية تبتدأ عنتد الحافتة
starts at the leading edge, that is (δ=0) when ( فستصتتتبx=0) ( عنتتتدماδ=0) التتتتي يالمستتتها المتتتا ع أمالً أي
(x=0), then the equation will be converted to: : المعادلة
( x = 3.45 (δ
.
=
577
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
The friction factor (or the friction drag (ميمكن ايجاد معامل االحككاك (أم معامل الجر بسبب االحتكتاك
coefficient) can be evaluated by equation : ( ففي هذا الحالة111117) باستخدام المعادلة
(11.107), in this case we have:
Substituting δ from equation (11.111) into : ( نحصل علس111111 ) من المعادلةδ م بالتعميإ عن
equation (11.112), we obtain:
.
τ0 = 0.029 ρ u∞2 ( (11.113)
FD = ∫ τ d (11.114)
Where L = plate length; and we considered the , طمل الصفيحة مجعلنا عرضها مستاميا ً الماحتدL حيث يمثل
width = 1. Substituting τ0 in equation (11.114) : ( ثم نكاملها111114) في المعادلةτ0 نعمإ عن
and integration yields:
FD = 0.036 ρ u∞2 L ( .
(11.115)
The friction drag coefficient is defined by مان معامل الجر بستبب االحتكتاك بستبب االحتكتاك هتم معترف
equation (10.1) : ( في الفصل العاشر علس النحماآلتي1111) بالمعادلة
578
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
A is the area which is equal to L multiplied by مبالتعميإ عن, (b =1) مضرمبا ً بالعرإL تساميA مهنا
the width (b = 1). Substituting FD from equation : ( في المعادلة اعالا ينتج اآلتي111115) من المعادلةFD
(11.115) into the above equation, we obtain the
following:
.
CDf = 0.072 (
.
CDf = 0.072 ( (11.116)
The experimental results provided a slightly م لكتتن التجتتارب المختبريتتة تعطتتس معادلتتة تختلتتف قلتتيالً عتتتن
different equation to (11.116), which is ( م هي111116)
.
CDf = 0.074 ( (11.117)
A petroleum-liquid flows over a flat plate with a 3 m/s ينساب سا ل نفطس فمم صفيحة مستمية بسرعة قدرها
velocity of 3 m/s. If the length of the plate is احسب سمك الطبقة المتاخمة ممقدار اجهاد القص عند نقطة تقع
2m, its width is 1.25 m, the liquid density is في منتصف طمل الصفيحة ثم احسب قمة الجر علما ً ان طمل
860 kg/m3 and the liquid kinematic viscosity is مكثافتة الستا ل1.25 m معرضتها2 m الصتفيحة
10-5 m2/s, calculate: 10-5 m2/s ملزمجته الكينماتية860 kg/m3
The thickness of the boundary layer
The shear stress at a point in the middle
of the plate
The drag force
579
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Solution الحل
Given: :المعلمم
Find:
(a) We first calculate Reynolds number (أ) نحسب أمالً رقم رينملدز
u∞
Rex =
Rex=1 = = 3 x 105
We note that Reynolds number is less than ( لذا يمكن أن3 x 106) م يالحظ ان رقم رينملدز أصغر من
(3 x 106) which implies that the boundary layer معليتته نستتتخدم المعادلتتة. تكتتمن الطبقتتة المتاخمتتة طبقتتة طباقيتتة
is laminar. Thus, we can apply equation (11.57), (11157)
.
δ=
√
.0
δ= = 0.009128 m
√ 0
δ = 9.128 mm
580
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
(b) We calculate τ0 using equation (11.60) )11161 ) باستخدام المعادلةτ0 (ب) نحسب
τ0 = 0.33 μ u∞ √
τ0 = 4.691 N/m2
(c) We compute the drag coefficient CDf باستتتتتخدام المعادلتتتتةCDf ( ) نحستتتتب معامتتتتل الجتتتتر
using equation (11.65) and then the (10.1) ( ثم نجد قمة الجر من المعادلة11165)
drag force from equation (10.1)
.
CDf = (Eqn. 11.65)
√
L = 2m
ReL = = 6 x 105
The Reynolds number value indicates that the م يتضتت متتن قيمتتة رقتتم رينملتتدز ان الجريتتان يمكتتن أن يبقتتس
flow over the whole surface of the plate is طباقيا ً فمم سط الصتفيحة بأكملته ممتا يبترر استتخدام المعادلتة
laminar; this fact justifies the application of (11.65)
equation (11.65)
.
CDf =
√
581
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
FD = 16649 N
Exercise كمريغ
Water flows over a flat plate with a velocity of 2.5 m/s ينستتاب المتتاء فتتمم صتتفيحة مستتتمية بستترعة قتتدرها
2.5 m/s. If the length of the plate is 3m, its احسب سمك الطبقة المتاخمة ممقدار اجهاد القص عند نقطة تقع
width is 1.29 m, the water density is فتي ثلتث طتتمل الصتفيحة ثتتم احستب قتمة الجتتر علمتا ً ان طتتمل
103 kg/m3 and the water kinematic viscosity is 103 kg/m3 مكثافة الماء1.29 m معرضها3 m الصفيحة
10-5 m2/s, use Excel to calculate: . استخدم برنامج اكسل. 10-6 m2/s ملزمجته الكينماتية
The thickness of the boundary layer
The shear stress at a point in the middle
of the plate
The drag force
582
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
Fluid velocity beyond the LT-1 m/s u∞ سرعة الما ع خارج حدمد الطبقة
boundary layer المتاخمة
LT-1 m/s u’ مقدار ترام السرعة
Velocity fluctuations
Maximum velocity LT-1 m/s umax السرعة القصمى
Dimensionless group -- -- u+ مجممعة ال بعدية
Three dimensions L m x,y,z ا بعاد أم االتجاها الثالثة
Pseudo Reynolds number -- -- y+ رقم رينملدز المهمي
Boundary layer thickness L M δ سمك الطبقة المتاخمة
Viscosity
-1 -1
ML T Ns/m 2
μ اللزمجة
-1 -1
ML T Ns/m 2
με اللزمجة الدمامية
Eddy viscosity
Kinematic viscosity L2T-1 m2/s اللزمجة الكينماتية
Density ML-3 kg/m3 ρ الكثافة
Shear stress at the surface ML-1T-2 N/m τ0 اجهاد القص عند سط الصفيحة
N/m τRe اجهاد رينملدز
Reynolds stress ML-1T-2
583
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
11.2 Air is flowing over a flat plate at a velocity يجتتري تيتتار متتن الهتتماء فتتمم ستتط صتتفيحة مستتتمية1111
of 10 m/s. If the length of the plate is 0.5 m and احستتب معامتل الجتتر م قتتمة الجتتر. 10 m/s بسترعة قتتدرها
its width is 2 m, compute the drag coefficient مكثافتتة2 m معرضتتها0.5 m علم تا ً ان طتتمل الصتتفيحة
and the drag force. The density of air is 1.2 . 1.8 x 10-5 Ns/m2 ملزمجته1.2 kg/m3 الهماء
kg/m3 and its viscosity is 1.8 x 10-5 Ns/m2.
Ans. ج
0.00232 , 0.134 N
11.3 If the velocity distribution inside the اذا كان ت معادلتتة تمزيتتع الستترعة فتتي الطبقتتة المتاخمتتة1111
boundary layer is given by الطباقية
= sin ( )
Show that اثب ان
Hint: Use Von Karman method assuming ) = 0) استخدم طريقة فمن كارمان مفترضا ً أن: مالحةة
( = 0)
11.4 Determine the drag force for a plate with a معرضتها48 cm احستب قتمة الجتر لصتفيحة طملهتا1111
length of 48 cm and width of 15 cm. The plate is 6.1 m/s ممضمعة طمليا ً في مجرى نفطي سرعته15 cm
positioned in an oil stream moving at a velocity مكذلك جد سمك الطبقة المتاخمة ممقدار اجهتاد القتص عنتد.
of 6.1 m/s. Also, find and the boundary layer 0.925 حافة مت خرة الصتفيحة علمتا ً ان كثافتة التنفط النستبية
thickness and shear stress at the rear-edge of 0.9 x 10-4 m2/s م لزمجته الكينماتية
the plate. The specific gravity of the oil is 0.925
and its kinematic viscosity is 0.9 x 10-4 m2/s
584
11 المعادالت التفاضلية والطبقة المتاخمة 11
DIFFERENTIAL EQUATIONS &THE BOUNDARY LAYER
11.5 Derive Hagen-Poiseuille equation for a اشتم معادلة هتاكن بمزيتل ل جريماغ ال مزج المستتقر فتي1111
steady viscous flow in a horizontal pipe with a لمتتتا ع ميتتر انضتتغاطي لزمجتتته ثابتتتتةr0 انبتتمب افقتتي قطتترا
diameter of r0. The fluid is incompressible with ثاب المقدار افترإ جريانا ً باتجاا ماحد معد كدرج الي
a constant viscosity. Assume one dimensional المقدار
flow and constant pressure gradient
Hint: start with the continuity equation and the ابتتدأ متتن معادلتتة االتصتتال م معادلتتة نافيرستتتمكس: مالحةممة
Navier-Stokes equation in the cylindrical : باالحداثيا االسطمانية مهي
coordinates, which is:
= + +
مان
And
u
=0
11.6 Conduct an internet search to find out استخدم ا نترن للبحث عن احدث1111
about the latest developments regarding: :التطمرا التي تخص
585
REFERENCES المصادر
586
INDEX Page الصفحة الفهرست
A A
Absolute pressure 66 الضؽط المطلق
Absolute zero 66 الصفر المطلق
Acceleration 4 التعجٌل
Acceleration of gravity 9 ًالتعجٌل الجاذب
Accelerated fluid masses 111 كتل الموائع المعجلة
Accelerated motion of particles 508 هبوط الدقائق المعجل
Adhesion 43 تالصق
Adiabatic gas flow 318 , 322 ًجرٌان الؽاز االدٌبات
Adiabatic process 171 )العملٌة بدون تبادل حراري (االدٌباتٌة
Aggregate fluidisation 518 التمٌع المتجمع
Air lift pump 437 مضخة رافعة بالهواء
Angular velocity 121 , 512 السرعة الزاوٌة
Annular flow 279 , 351 ًالجرٌان الحلق
Apparent viscosity 281 اللزوجة الظاهرٌة
Approach velocity 388 سرعة االقتراب
Archimedes principle 102 قاعدة ارخمٌدس
Atmospheric pressure 66 الضؽط الجوي
Average velocity 194 متوسط سرعة الجرٌان
B B
Barometer 75 البارومتر
Base quantities 4 الكمٌات االساسٌة
Bernoulli equation 189 ًمعادلة برنول
Bingham’s plastics 281 لدائن بنكهام
Blasius solution of the - - حل معادالت الطبقة المتاخمة االضطرابٌة
turbulent boundary layer 576 بطرٌقة بالسٌوس
Boiling 49 الؽلٌان
Blower 439 نافخ
Boundary layer 229 , 554 الطبقة المتاخمة
Boundary layer equations 555 معادالت الطبقة المتاخمة
Boundary layer-Blausius solution 556 حل معادالت الطبقة المتاخمة بطرٌقة بالسٌوس
Boundary layer-Von Carman analysis 559 تحالٌالت الطبقة المتاخمة بطرٌقة فون كارمان
Boundary layer-Von Carman solution 562 حل معادلة فون كارمان للطبقة المتاخمة الطباقٌة
Bourdon gauge 76 مقٌاس بودون
British thermal unit 10 الوحدة الحرارٌة البرطانٌة
Buoyancy 101 الطفو
Bubble flow 351 ًالجرٌان الفقاع
Bulk modulus of elasticity 47 ًمعامل المرونة الحجم
587
INDEX Page الصفحة الفهرست
C C
Capillary tubes 43 االنابٌب الشعرٌة
Characteristics curves 417 المنحنٌات الممٌزة
Carman equation 463 , 464 , 469 معادلة كارمان
Catalyst 26 العامل المساعد
Cavitation 49 , 415 ظاهرة التجوؾ
Center of buoyancy 102 مركز الطفو
Centre of gravity 102 مركز الثقل
Center of pressure 81 مركز الضؽط
Centrifugal force 122 , 511 قوة الطرد المركزي
Centrifugal compressor 441 ضاؼطات الطرد
Centrifugal pump 122 , 415 مضخة الطرد المركزي
Centrifugal separation 511 الدقائق تحت تأثٌر قوة الطرد المركزي
Centrifuge 122 , 514 فرازة الطرد المركزي
Centroid 81 مركز المساحة
Coefficient of contraction 375 معامل التقلص
Coefficient of elasticity 301 معامل المرونة
Cohesion 43 تماسك
Composition 154 نسب المكونات
Compressible fluids 48 موائع انضؽاطٌة
Compressibility 57 االانضؽاطٌة
Compressibility factor 156 معامل االنضؽاطٌة
Compressor 441 ضاؼط الؽاز
Conservation of energy 183 , 186 حفظ الطاقة
Conversion of mass 181 , 182 حفظ الكتلة
Conversion of momentum equation 191 معادلة حفظ الزخم
Consistency factor 233 , 281 معامل التجانس
Consumed power 408 القدرة المبذولة
Continuity equation 181 معادلة االتصال
Continuous substance 30 مادة متصلة
Control volume 179 , 545 حجم التحكم
Convection Transport 541 االنتقال بالحمل
Converging nozzle 320 منفث ملتم
Correction factor 185 معامل التصحٌح
Critical pressure 157 الضؽط الحرج
Critical pressure ratio 321 نسبة الضؽط الحرجة
Critical temperature 157 درجة الحرارة الحرجة
Critical velocity 226 السرعة الحرجة
Cyclone 511 الفرازة المخروطٌة
588
INDEX Page الصفحة الفهرست
Dalton’s law D
Darcy’s law 152 قانون دالتون
Density 457 ًقانون دارس
Derived quantities 4, 30, 31 الكثافة
Diaphragm pump 4 الكمٌات المشتقة
Differential continuity equation 435 المضخة ذات الرق
Differential control volume 535 معادلة االتصال التفاضلٌة
Differential manometer 535 ًحجم التحكم التفاضل
Dimensions 72 ًالمانومتر التباٌن
Dimensional analysis 3 االبعاد
Discharge 3 التحلٌل البعدي
Discharge coefficient 29 التصرٌؾ
Displacement 375 معامل التصرٌؾ
Dosing pumps 29 انزٌاح
Drag coefficient 435 مضخات المعاٌرة
Drag force 475 قوة الجر
Duty point 477 معامل الجر
Dynamic viscosity 418 , 428 نقطة التشؽٌل
35 , 569 اللزوجة الدٌنامٌة
E
Eddy viscosity E
Efficiency 569 اللزوجة الدوامٌة
Empirical velocity distribution equation 406 الكفاءة
Energy equation 6 , 575 معادلة توزٌع السرعة التجرٌبٌة
Enthalpy 183 معادلة الطاقة للمائع الجاري
Entropy 164 ًاالنثالب
Entry length 164 ًاالنتروب
Equation of state 232 طول المدخل
Equivalent length 149 , 150 معادلة تؽٌر حالة الؽاز
Ergun equation 253 الطول المكافىء
Euler equation 466 معادلة أٌركون
199 , 553 معادلة اٌولر
F
Fan F
Fanning fiction factor 438 مروحة
Fanno line 235 معامل احتكاك فاننك
First moment of area 329 خط فانو
Fixed bed reactor 81 عزم المساحة االول
Floatation 457 المفاعل ذو الطبقة الثابتة
Flow across a cylinder 102 العوم
Flow past spherical particles 480 ًجرٌان المائع عبر سطح اسطوان
484 الجرٌان عبر جسٌمات كروٌة الشكل
589
INDEX الصفحة Page الفهرست
G G
Galileo number 499 رقم ؼالٌلٌو
Gate valve 252 صمام بوابً
Gear pump 436 المضخة ذات المسننات
Geometrically similar pumps 424 مضختٌن متماثلتٌن هندسٌا
Globe valve 252 صمام كروي
Gauge pressure 66 ضؽط المقٌاس ( الضؽط النسبً )
H H
Hagen 237 هاكن
Head 63 العمود ( عمود المائع المكافئ )
Hot wire anemometer 394 األنٌمومٌتر ذو السلك الساخن
Hydraulic mean diameter 278 , 383 متوسط القطر الهٌدرولٌكً
I I
Ideal gas 149 الؽاز المثالً
Ideal gas mixture 152 خلٌط الؽاز المثالً
Impact pressure 368 الضؽط الصدمً
Impeller 416 الدفاعة المروحٌة
Inclined manometer 74 المانومترالمائل
590
INDEX Page الصفحة الفهرست
K K
Kinematic viscosity 35 , 572 اللزوجة الكٌنماتٌة
Kinetic energy 162 الطاقة الحركٌة
Kinetic head 190 , 368 عمود الطاقة الحركٌة
Kinetic theory 36 النظرٌة الحركٌة
Kozeny equation 461 ًمعادلة كوزن
L L
Laminar boundary layer 231 الطبقة المتاخمة الطباقٌة
Laminar flow 178 , 225 ًالجرٌان الطباق
Laminar sub- layer 230 , 574 الطبقة التحتٌة الطباقٌة
Laval nozzle 341 منفث الفال
Lift coefficient 478 معامل الرفع
Lift force 476 قوة الرفع
Liquid & Gas 149 السائل والؽاز
Lockhart and Martinelli method 352 ً لوكهارت ومارتٌنٌل- تخمٌن هبوط الضؽط
M M
Mach number 305 , 320 , 333 رقم ماخ
Magnetic meter 396 ًالمقٌاس المؽناطٌس
Manometer 70 المانومتر
Mass conservation equation 182 معادلة حفظ الكتلة
Mass flow rate 29 ًمعدل الجرٌان الكتل
Mean pressure 55 , 197 متوسط الضؽط
Mean specific volume 310 ًمتوسط الحجم النوع
591
INDEX Page الصفحة الفهرست
N N
Nash Hytor pump 440 مضخة ناش هاٌتور
Navier Stokes equations 541 , 549 معادالت نافٌر ستوكس
Net positive suction head 414 صافً عمود السحب الموجب
Neutral equilibrium 106 التوازن المتعادل
Newtonian fluids 232 الموائع النٌوتونٌة
Newton’s viscosity law 35 قانون نٌوتن للزوجة
Nominal pipe size 287 الحجم األسمً لالنبوب
Non-dimensional groups 6 المجموعات ؼٌر بعدٌة
Non-circular conduits 278 القنوات ؼٌر دائرٌة المقطع
Non ideal gas 156 ًالؽاز ؼٌر المثال
Non Newtonian fluid 232 , 279 , 280 ًالمائع ؼٌر النٌوتون
Non uniform flow 178 لجرٌان ؼٌر المنتظم
Notch 389 اثلمة
Nozzle 210 منفث
O O
One dimensional flow 179 الجرٌان ببعد واحد
Optimum pipe size 287 حجم االنبوب األمثل
Orifice meter 16 , 372 ًالمقٌاس الفوه
Orifice plate 72 صفٌحة مثقوبة
Overturning moment
105 عزم التدوٌر
P
592
INDEX Page الصفحة الفهرست
Packed towers P
Parallel arrangement of pumps 457 األبراج المحشوة
Parallel axis theorem 428 ربط مضختان على التوازي
Partial differential equation 82 نظرٌة المحور الموازي
Partial pressure 63 المعادلة التفاضلٌة الجزئٌة
Partial volume 152 ًالضؽط الجزئ
Particle Mechanics 152 ًالحجم الجزئ
Particulate fluidisation 26 , 475 مٌكانٌك الدقائق
Pascal’s Law 518 ًالتمٌع الدقائق
Permeability 56 قاعدة باسكال
Phase 458 النفاذٌة
Piezometer 27 طور
Pipe bend 70 , 368 بٌزومتر
Pipe fittings 367 حنٌة أنبوب
Piston pump 251 قطع تركٌب األنابٌب
Pito-static tube 434 المضخة ذات المكبس
Plug flow 370 انبوب بٌتوت ساتٌك
Polytropic process 351 الجرٌان االنسدادي
Porosity 172 عملٌة بولٌتروبٌة
Porous media 459 , 517 المسامٌة
Positive displacement pumps 457 األوساط المسامٌة
Potential energy 433 مضخات اإلزاحة الموجبة
Potential head 162 ) طاقة الوضع ( الطاقة الكامنة
Power 190 عمود الوضع
Power series 405 القدرة
Power supply 17 متسلسلة قوى
Prefixes 409 القدرة المجهزة
Pressure distribution for a rotating mass of fluid 7 سوابق
Pressure distribution diagram 121 المائع فً حالة الدوران – توزٌع الضؽط
Pressure drop 91 مخطط توزٌع الضؽط
Pressure drop in fluidised bed 234 , 282 هبوط الصؽط
Pressure energy 520 هبوط الضؽط فً الطبقة المتمٌعة
Pressure head 162 طاقة الضؽط
Pressure wave 65 , 190 , 236 عمود الضؽط
Priming valve 298 موجبة الضؽط
Pseud Reynolds number 432 صمام سقً المضخة
573 ًرقم رٌنولدز وهم
Q
Quantity meters Q
397 المقاٌٌس الكمٌة
593
INDEX Page الصفحة الفهرست
R
Rational Equations R
Real gas 6 المعادالت العقلٌة
Reciprocating compressors 155 ًالؽاز الحقٌق
Reciprocating pumps 442 الضاؼطات الترددٌة
Reduced pressure 434 المضخات الترددٌة
Reduced temperature 156 الضؽط المخفض
elative pressure 156 درجة الحرارة المخفضة
Relative roughness 66 ًالضؽط النسب
Resultant force 238 الخشونة النسبٌة
Reversible process 80 ,192 القوة المحصلة
Reynolds number 161 العملٌة االنعكاسٌة
Reynolds transport theorem 6 , 226 رقم رٌنولدز
Righting moment 179 نظرٌة رنولدز لألنتقال
Rotameter 104 عزم التقوٌم
Rotary pumps 381 مقٌاس الجرٌان الدوار
Rough pipes 433 المضخات الدوارة
237 االنابٌب الخشنة
S
Separation of dissimilar particles S
Series arrangement of pumps 492 فصل دقائق مختلفة الحجم
Shaft work 427 ًربط مضختان على التوال
Shear force 186 , 406 شؽل عمود االدارة
Shear rate 27 قوة القص
Shear stress 33 معدل القص
Shear velocity 27 , 476 اجهاد القص
Schiller and Naumann equation 573 السرعة القصٌة
Shock wave 486 معادلة شلر و نومان
Simple manometer 332 الموجة الصدمٌة
Slug flow 71 المانومتر البسٌط
Slurry 351 الجرٌان المتالطم
Smooth pipes 431 سوائل تحتوي مواد صلبة عالقة
Sonic flow 237 االنابٌب الملساء
Sonic velocity 306 ًالجرٌان الصوت
Specific heat capacity at constant pressure 321 السرعة الصوتٌة
Specific heat capacity at constant volume 167 السعة الحرارٌة النوعٌة للؽاز بثبوت الضؽط
Specific gravity ( relative density ) 165 السعة الحرارٌة النوعٌة للؽاز بثبوت الحجم
Specific surface 32 الكثافة النسبٌة
Specific volume 459 المساحة السطحٌة النوعٌة
Specific weight
Specific speed 32 ًالحجم النوع
31 ًالثقل النوع
594
INDEX Page الصفحة الفهرست
595
INDEX Page الصفحة الفهرست
596
INDEX الصفحة Page الفهرست
W
Wall effect W
Water hammer 469 تأثٌر الجدران
Wavy flow 285 الطرق المائً
Weir 351 الجرٌان المتموج
Weight density 387 الحاجز الؽاطس
Work and the first law 31 الكثافة الثقٌلة
X 163 الشؽل والقانون االول
Y X
Yield stress Y
234 اجهاد الخضوع
597
المصطلحات العلمية عربي – انكليزي
أ
ب
Barometer بارومتر
Adiabatic )ًبدون تبادل حراري ( ادٌبات
Polymer بولٌمر
Piezometer بٌزومتر
ت
Wall effects تأثٌر الجدران
Deceleration تباطؤ
Dimensional analysis تحلٌل بعدي
Velocity gradient تدرج السرعة
Fluctuations تراوح
Filtration ترشٌح
Molecular structure ًتركٌب جزٌئ
Process design تصمٌم العملٌات الصناعٌة
598
المصطلحات العلمية عربي – انكليزي
ث
Universal gas constant ثابت الغازات العام
Specific weight ًثقل نوع
Notch ثلمة
ج
Turbulent flow ًجرٌان اضطراب
Plug flow جرٌان انسدادي
Streamline flow ًجرٌان انسٌاب
One dimensional flow جرٌان ببعد واحد
Fully developed flow جرٌان تام التكوٌن
Stratified flow ًجرٌان تراصف
Tow phase flow جرٌان ثنائً الطور
Annular flow ًجرٌان حلق
Subsonic flow جرٌان دون الصوت
Spray flow جرٌان رذاّذي
Sonic flow ًجرٌان صوت
Laminar flow ًجرٌان طباق
Unsteady flow جرٌان غٌر مستقر
Non uniform flow جرٌان غٌر منتظم
Supersonic flow ًجرٌان فوق صوت
Viscous flow جرٌان لزج
Slug flow جرٌان متالطم
Wavy flow جرٌان متموج
Uniform flow جرٌان منتظم
Parabolic ًجرٌان مكافئ دوران
ح
Weir حاجز غاطس
State حالة
State of the system حالة المنظومة
Control volume حجم التحكم
599
المصطلحات العلمية عربي – انكليزي
خ
Capillarity خاصة شعرٌة
Choke خانق
Relative roughness خشونة نسبٌة
Fanno line خط فانو
Stream lines خطوط االنسٌاب
د
Reduced temperature درجة الحرارة المخفضة
Impeller دفاعة مروحٌة
Particles دقائق
Forced vortex دوامة قسرٌة
Cycle دورة
Thermodynamics دٌنامٌك الحرارة
Gas dynamics دٌنامٌك الغاز
ذ
ر
Reynolds number رقم رٌنولدز
Pseudo Reynolds number ًرقم رٌنولدز الوهم
Froude number رقم فرود
ز
Momentum زخم
س
Terminal falling velocity سرعة السقوط النهائٌة
Angular velocity سرعة زاوٌة
Sonic velocity سرعة صوتٌة
Shear velocity سرعة قصبٌة
Instantaneous velocity سرعة لحظٌة
Velocity سرعة متجهة
Priming سقً المضخة
600
المصطلحات العلمية عربي – انكليزي
ش
Wheatstone bridge شبكة وٌتستون
Surface tension ًشد سطح
Work شغل
Shaft work شغل عمود االدارة
ص
Net forces صافً القوى
Net positive suction head صافً عمود السحب الموجب
Absolute zero صفر مطلق
Valve صمام
Gate valve ًصمام بواب
Check valve صمام غٌر مرجع
Foot valve ًصمام غٌر مرجع سفل
globe valve صمام كروي
stuffing box صندوق الحشوة
ض
compressor ضاغط الغاز
reciprocating compressor ضاغط ترددي
vapour pressure ضغط البخار
vacuum pressure ضغط الفراغ
gauge pressure ) ًضغط المقٌاس ( ضغط نسب
partial pressure ًضغط جزئ
impact pressure ًضغط صدم
reduced pressure ضغط مخفض
Absolute pressure ضغط مطلق
Relative pressure ًضغط نسب
Hydrostatic pressure ًضغط هاٌدروستاتٌك
ط
Pressure energy طاقة الضغط
Potential energy طاققة الوضع
Kinetic energy طاقة حركٌة
Internal energy طاقة داخلٌة
Laminar ًطباق
Transition layer طبقة انتقالٌة
Laminar sub layer طبقة تحتٌة طباقٌة
Boundary layer طبقة متاخمة
Turbulent boundary layer طبقة متاخمة اضطرابٌة
Laminar boundary layer طبقة متاخمة طباقٌة
Water hammer ًطرق مائ
Bouncy طفو
601
المصطلحات العلمية عربي – انكليزي
ظ
Cavitation ظاهرة التجوف
ع
Overturning moment عزم التدوٌر
Head عمود
Suction head عمود السحب للمضخة
Pressure head عمود الضغط
Kinetic head عمود الطاقة الحركٌة
Potential head عمود الوضع
Element عنصر صغٌر ( جسٌم )
Floatation عوم
غ
Perfect gas غاز تام
Real gas غاز حقٌقً
Non-ideal gas غاز غٌر مثالً
Ideal gas غاز مثالً
Casing غالف
ف
Vacuum فراغ
Centrifuge فرازة الطرد المركزي
Cyclone فرازة مخروطٌة
Orifice فوهة
ق
Pascal’s law قاعدة باسكال
Pipe fitting قطع تركٌب األنابٌب
Parabola قطع مكافئ
Frictional force قوة احتكاكٌة
Drag force قوة الجر
Form force قوة الجر الشكلٌة
Viscous drag قوة الجر اللزجة
Lift force قوة الرفع
Centrifugal force قوة الطرد المركزي
Shear force قوة القص
Up thrust قوة دافعة
Resultant force قوة محصلة
Inertia force قوى القصور الذاتً
Viscous forces قوى لزجة
ك
Density كثافة
602
المصطلحات العلمية عربي – انكليزي
ل
Viscosity لزوجة
Dynamic viscosity لزوجة دٌنامٌة
Eddy viscosity لزوجة دوامٌة
Kinematic viscosity لزوجة كٌنماتٌة
م
Continuous substance مادة متصلة
Manometer مانومتر
Differential manometer ًمانومتر تباٌن
Inclined manometer مانومتر مائل
Inverted manometer مانومتر مقلوب
Compressible fluid ًمائع انضغاط
Thixotropic fluid ًمائع تسٌل
Working fluid مائع شغال
Incompressible fluid ًمائع غٌر انضغاط
Non viscous fluid مائع غٌر لزج
Non Newtonian ًمائع غٌر نٌوتون
Viscous fluid مائع لزج
Newtonian fluid ًمائع نٌوتون
Evaporator مبخر
Velocity vector متجه سرعة
State variables متغٌرات الحالة
Infinitesimal متناهً الصغر
Mean velocity متوسط السرعة
Mean pressure متوسط الضغط
Mean hydraulic diameter ًمتوسط القطر الهٌدرولوك
Mean free path متوسط المسار الحر
Dimensionless group مجموعة غٌر بعدٌة
Finite محدد
Steam boiler مرجل بخاري
Centre of pressure مركز الضغط
Centre of buoyancy مركز الطفو
Centroid مركز المساحة
Meta centre ًمركز بٌن
Fan مروحة
Suspension مزٌج معلق
Specific surface مساحة سطحٌة نوعٌة
603
المصطلحات العلمية عربي – انكليزي
Porosity مسامٌة
Minimum fluidising velocity مسامٌة التمٌع الدنٌا
Emulsion مستحلب
Arbitrary datum مستوى اسناد اختٌاري
Strainer مصفى
Positive displacement pump مضخة اإلزاحة الموجبة
Centrifugal pump مضخة الطرد المركزي
Metering pump مضخة المعاٌرة
Reciprocating pump مضخة ترددٌة
Rotary pump مضخة دوارة
Diaphragm pump مضخة ذات رق
Gear pump مضخة ذات مسننات
Piston pump مضخة ذات مكبس
Air lift pump مضخة رافعة بالهواء
Multistage pump مضخة متعددة المراحل
Mono pump مضخة مونو
Nash Hytor pump مضخة ناش هاٌتور
Navier- stokes equations ستوكس-معادالت نافٌر
Continuity equation معادلة االتصال
Empirical equation معادلة تجرٌبٌة
Equation of state معادلة تغٌر حالة الغاز
Power law equation معادلة ذات قوة جبرٌة
Kozeny equation ًمعادلة كوزن
Fanning friction factor معامل احتكاك فاننك
Friction factor معامل االحتكاك
Compressibility factor معامل االنضغاطٌة
Coefficient of contraction معامل التقلص
Consistency factor معامل التجانس
Lift coefficient معامل الرفع
Modulus of elasticity معامل المرونة
Bulk modulus of elasticity ًمعامل المرونة الحجم
Flow rate معدل الجرٌان
Volumetric flow rate ًمعدل الجرٌان الحجم
Mass flow rate ًمعدل الجرٌان الكتل
Fixed bed reactor مفاعل الطبقة الثابتة
Vena contracta مقطع اقلص
Rotameter مقٌاس الجرٌان الدوار
Bourdon gauge مقٌاس بوردون
Venture meter مقٌاس فنتشوري
Orifice meter ًمقٌاس فوه
Quantity meter ًمقٌاس كم
Nozzle منفث
Laval nozzle منفث الفال
Shock wave موجة صدمٌة
604
المصطلحات العلمية عربي – انكليزي
ن
Blower نافخ
Reciprocating blower نافخ ترددي
Turbo- blower ًنافخ توربٌن
Continuum theory نظرٌة االتصال
Parallel axis theorem نظرٌة المحور الموازي
Kinetic theory نظرٌة حركٌة
Reynolds transport theorem نظرٌة رٌنولدز لالنتقال
Mixing length theory نظرٌة طول االمتزاج
Permeability نفاذٌة
Duty point ( operating point) نقطة التشغٌل
هـ
و
ي
Deforms ٌتحرف
605
APPENDIX الملحق
It is recommended to use data, such as يوصييييمؤلف بفيييياؤ الييييع العؤلف ل يييي ؤلف ييييي ؤ
properties of liquids and gases, dimensions of لف عييوة وؤولترع رييحؤف صييومؤل ييتؤ و يياحؤ
pipes and properties of petroleum products, ثييييمؤ يييييول ؤلفلييييولامؤولف يييييا لحؤول ييييياعؤ
from available literature and from the Internet. لترا ييييخؤو يييول ؤلف رعو ييياحؤلفييير ؤو فييي ؤ
This is to encourage students to be independent فعشيي ي ؤلف يي ؤلتلع ييااؤل ييتؤلفيير ؤوي كيي ؤؤ
learners. Internet search engines such as كيياحؤلف يياؤةييمؤلترع رييحؤلفعييمؤ لتليع ار ؤ
عوة ؤك أؤهااألؤ ؤلف و اح
Google are very convenient to use and provide
free access to information.
606
FLUID MECHANICS ميكانيك الموائع
Bilingual ثنائي اللغة
M.Taki Al Kamil محمد تقي الكامل
2016
This book covers the basic principles of يغطي هذاا الكتذا متطلبذا الداااذا اليليذة
fluid mechanics for engineering لمبذذذذذذذادمي الذذذذذذذا ميكانيذذذذذذذ الميائذذذذذذذ ذذذذذذذي
undergraduate students. It is written الختصاصذذذا الهنداذذذية .يقذذذد كتذذذ الذذذذن
in Arabic and English. This is an بااذذذلي مبتكذذذا ل ذذذاا الماذذذاهيا الهنداذذذية
innovative method of presenting بذذذذاللغتيع ال ابيذذذذة يالنكلي يذذذذة ,ياع الهذذذذد
engineering concepts. The main الاذذذذا مذذذذع هذذذذاط الطايقذذذذة هذذذذي ماذذذذااد
objective of the bilingual text is to help المت لمذذذذيع ذذذذي ال ذذذذالا ال ابذذذذي الذذذذ هذذذذا
learners in the Arab world to المبادمي الاااية لميكاني الميائ .
understand the principles of fluid
mechanics.