Professional Documents
Culture Documents
संo: टीईसी/सीडी/डीडी/एमजीपी-911/01/मई19
www.tec.gov.in
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
GSM Repeater Station Parameters as per 3GPP TS 51.026 and TS 45.005. Annex-F6
WCDMA Repeater Station Parameters as per 3GPP TS 25.143. Annex-F7
WCDMA Repeater Stn Operating Frequency as per NFAP. Annex-F
LTE Repeater Station Operating Frequency as per NFAP. Annex-F
LTE Repeater Station Parameters as per 3GPP TS 36.143. Annex-F8
GSM BTS Operating Frequency as per NFAP-Annex-F
GSM BTS Output Power as per 3GPP TS 45.005 Clause 4.1.2. Annex-F1
1. CELLULAR
1
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Dual IP Layer Operation RFC 4213 - Address as per RFC 4213 Clause 2.1. Annex-P6
Dual IP Layer Operation RFC 4213 - DNS as per RFC 4213 Clause 2.1. Annex-P6
IPV6 Header Parameters as per RFC 2460. Annex-P7
ER Test Parameters for Products having Cellular Interfaces or Functionalities
2
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
3
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
3. CONFISDN
Layer-III BRI Specification - Call Clearing as per Q.931. Annex-D1
ER Test Parameters
for ISDN and CCS#7
4
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
4. CONFMOB
Mobile device - Non Zero IMEI/MEID/ESN as per Annex-M
ER Test Parameters
for Devices having
Mobile Device Indian Language Support as per IS 16333 (Part 3). Annex-M
functionalities
mobile phone
Mobile Emergency Support - Call on 112 as per DoT order, 3GPP2 C.S0023, TS 22.101, TS 24.008. Annex-M
Mobile Emergency Support - GPS Location as per G.S.R. No. 1441 (E) dated 23-11-2017. Annex-M
Mobile Emergency Support - Panic Button as per G.S.R. No. 436 (E) , 3GPP TS 22.101, C.S0023. Annex-M
SAR Display for Mobile Handset as per Annex-M
IoT Dev - Non-0 IMEI or MEID or Unique MAC as per Annex-M
5
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Protocol Test for GPON Int as per Ethernet over GEM, G.984.2. Annex-J1
Throughput for GPON Int as per G.984.1, RFC 2544. Annex-J1
Line Test for EPON Int as per IEEE 802.3ah. Annex-J1
Throughput for EPON Int as per , RFC 2544. Annex-J1
Line test for XGPON Int as per IEEE 802.3ah. Annex-J1
Protocol test for XGPON Int as per G.987.2, XGEM. Annex-J1
5. CONFPON
6
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
5.CONFPON
ER Test Parameters for
7
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Immunity to Electrostatic Discharge as per TEC EMI EMC Standard, IEC:61000-4-2. Annex-B
ER Test Parameters for EMI EMC
Immunity to Fast Transients (Burst) as per TEC EMI EMC Standard, IEC:61000-4-4. Annex-B
Immunity to Radiated RF as per TEC EMI EMC Standard, IEC:61000-4-3. Annex-B
6.EMIEMC Immunity to RF Field Induced Conducted Disturbance as per TEC EMI EMC Standard, IEC:61000-4-6. Annex-B
Immunity to Surges as per TEC EMI EMC Standard, IEC:61000-4-5. Annex-B
Conducted And Radiated Emission - Class A as per TEC EMI EMC Standard, CISPR 22, CISPR 32. Annex-B
Tests
Immunity to AC Voltage Dips and Short Interruptions as per TEC EMI EMC Standard, IEC:61000-4-11. Annex-B
Immunity to DC Voltage Dips and Short Interruptions as per IEC:61000-4-29. Annex-B
Conducted And Radiated Emission - Class B as per TEC EMI EMC Standard, CISPR 22, CISPR 32. Annex-B
Conducted And Radiated Emission - receivers used on board vehicles, CISPR25
Conducted And Radiated Emission - Electrical Appliances, CISPR14-1
Immunity to Electrostatic Discharge- CD Level-4 as per TEC EMI EMC Standard, IEC:61000-4-2. Annex-B
8
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Idle State Current for 2 wire Int as per ETSI EN 300 001 and TBR-21 Clause 4.4.1. Annex-D
ER Test Parameters for Products having
Insulation Test for 2 wire Int as per ETSI EN 300 001. Annex-D
or connectable to 2-Wire Interfaces
Longitudinal Conversion Loss 2-W Int as per Q.552 Clause 2.1.1.2. Annex-D
7.INT2W Maximum Loop Current for 2W Int as per ETSI EN 300 001. Annex-D
Return Loss for 2W Int as per Q.552 Clause 2.1.1.2. Annex-D
Modem Receiver Signal as per V.34 (para 6.6). Annex-D
Modem Transmit Power as per T.4 (-3dBm to -15 dbm). Annex-D
Over Voltage Current Protection on 2W as per K.21. Annex-D
Voice Conference Verification as per Annex-D
Acoustic Shock Absorption as per P.360. Annex-D
Receiver Sensitivity for FAX as per T.4. Annex-D
Transmit Power Fax Machine as per T.4. Annex-D
Transmission of DTMF signalling as per Q.23 Clause 6 and 7. Annex-D
9
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
8.INTCELL
Operating Frequency for CDMA Int as per NFAP. Annex-F
GSM Int Parameters as per 3GPP TS 51 010-1 or EN 301 511. Annex-F10
Interfaces
10
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
11
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Receiver Sensitivity 40 GE Opt as per IEEE 802.3ba Clause 86, 87. Annex-H
Wavelength for 40 GE Opt as per IEEE 802.3ba Clause 86, 87. Annex-H
Average Launch power for 100 GE Opt as per IEEE 802.3ba Clause 86, 88. Annex-H
Receiver Sensitivity 100 GE Opt as per IEEE 802.3ba Clause 86, 88. Annex-H
Wavelength for 100 GE Opt as per IEEE 802.3ba Clause 86, 88. Annex-H
Link Speed and Autonegotiation Test FE as per IEEE 802.3. Annex-H
Link Speed and Autonegotiation Test GE as per IEEE 802.3. Annex-H
Average Launch power for FE Opt as per IEEE 802.3u. Annex-H
Receiver Sensitivity for FE Opt as per IEEE 802.3u. Annex-H
Wavelength for FE Opt as per IEEE 802.3u. Annex-H
12
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Bit Rate Tolerance OTU-1 Int as per G.709 Clause 7.3. Annex-L
Central Frequency for OTU-1 as per G.959.1 clause 7.2.2.3 and G.694.1. Annex-L
Input Jitter Tolerance for OUT-1 Int as per G.8251. Annex-L
Mean Total Input Power for OTU-1 as per G.959.1, G.693. Annex-L
Mean Total Output Power for OTU-1 as per G.959.1, G.693. Annex-L
Minimum Receiver Overload for OTU-1 as per G.959.1, G.695. Annex-L
ER Test Parameters for Products having OTN Interfaces
Mean Total Input Power for OTU-2 as per G.959.1, G.693. Annex-L
Mean Total Output Power for OTU-2 as per G.959.1, G.693. Annex-L
Minimum Receiver Overload for OTU-2 as per G.959.1, G.693. Annex-L
Output Jitter for OTU-2 Int as per G.8251. Annex-L
Receiver Sensitivity for OTU-2 Int as per G.959.1, G.693. Annex-L
Bit Rate Tolerance OTU-3 Int as per G.709 Clause 7.3. Annex-L
Central Frequency for OTU-3 as per G.959.1 clause 7.2.2.3 and G.694.1. Annex-L
Mean Total Input Power for OTU-3 as per G.959.1, G.693. Annex-L
Mean Total Output Power for OTU-3 as per G.959.1, G.693. Annex-L
Minimum Receiver Overload for OTU-3 as per G.959.1, G.693. Annex-L
Receiver Sensitivity for OTU-3 Int as per G.959.1, G.693. Annex-L
Bit Rate Tolerance OTU-4 Int as per G.709 Clause 7.3. Annex-L
Central Frequency for OTU-4 as per G.959.1 clause 7.2.2.3 and G.694.1. Annex-L
Mean Total Input Power for OTU-4 as per G.959.1, G.695. Annex-L
Mean Total Output Power for OTU-4 as per G.959.1, G.695. Annex-L
Minimum Receiver Overload for OTU-4 as per G.959.1, G.695. Annex-L
Receiver Sensitivity for OTU-4 Int as per G.959.1, G.693. Annex-L
13
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Bit Rate Tolerance 2 MBPS Int as per G.703 Clause 11.1 or ETSI-TBR-4 Clause B.2.3. Annex-I
Input Jitter Tolerance for 2 MBPS Int as per G.823, ETSI-TBR-4 Clause 9.3.3. Annex-I
Input Return Loss for 2 MBPS Int as per G.703 Clause 11.3, ETSI-TBR Clause 9.3.1. Annex-I
ER Test Parameters for Products having PDH Interfaces
Input Return Loss for 8 MBPS Int as per G.703 (cl.11.3) OR ETSI-TBR (Cl. 9.3.1). Annex-I
Output Jitter for 8 MBPS Int as per G.823/l.431 OR ETSI-TBR-4. Annex-I
Pulse Mask for 8 MBPS Int as per G.703 cl. 11.2 of (4/2014) OR TBR-4 (cl. 9.2.1). Annex-I
Bit Rate Tolerance 140 MBPS Int as per G.703 Clause 11.1 or ETSI-TBR-4 Clause B.2.3. Annex-I
Input Jitter Tolerance for 140 MBPS Int as per G.823, ETSI-TBR-4 Clause 9.3.3. Annex-I
Input Return Loss for 140 MBPS Int as per G.703 Clause 11.3, ETSI-TBR Clause 9.3.1. Annex-I
Output Jitter for 140 MBPS Int as per G.823/l.431 OR ETSI-TBR-4. Annex-I
Pulse Mask for 140 MBPS Int as per G.703 Cl. 11.2 of 4/2014, TBR-4 Cl. 9.2.1. Annex-I
Bit Rate Tolerance 34 MBPS Int as per G.703 Clause 13.1. Annex-I
Input Jitter Tolerance for 34 MBPS Int as per G.823. Annex-I
Input Return Loss for 34 MBPS Int as per G.703. Annex-I
Output Jitter for 34 MBPS Int as per G.823. Annex-I
Pulse Mask for 34 MBPS Int as per G.703. Annex-I
Bit Rate Tolerance 45 MBPS Int as per G.703 Clause 10. Annex-I
14
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
15
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Operating Wavelength Recv for EPON Int as per IEEE 802.3ah. Annex-J
Operating Wavelength Trans for EPON Int as per IEEE 802.3ah. Annex-J
Opt Output Power for EPON Int at OLT as per IEEE 802.3ah. Annex-J
Opt Output Power for EPON Int at ONT as per IEEE 802.3ah. Annex-J
Receiver Sensitivity for EPON Int at OLT as per IEEE 802.3ah. Annex-J
13.INTPON
Receiver Sensitivity for EPON Int at ONT as per IEEE 802.3ah. Annex-J
Operating Wavelength Recv for XGPON Int as per G.987.2. Annex-J
Operating Wavelength Trans for XGPON Int as per G.987.2. Annex-J
Opt Output Power XGPON Int at OLT as per G.987.2. Annex-J
Opt Output Power XGPON Int at ONT as per G.987.2. Annex-J
Receiver Sensitivity XGPON Int at OLT as per G.987.2. Annex-J
Receiver Sensitivity XGPON Int at ONT as per G.987.2. Annex-J
Operating Wavelength Recv XGSPON Int as per G.9807.1. Annex-J
Operating Wavelength Trans XGSPON Int as per G.9807.1. Annex-J
Opt Output Power XGSPON Int at OLT as per G.9807.1. Annex-J
Opt Output Power XGSPON Int at ONT as per G.9807.1. Annex-J
Receiver Sensitivity XGSPON Int at OLT as per G.9807.1. Annex-J
Receiver Sensitivity XGSPON Int at ONT as per G.9807.1. Annex-J
Operating Wavelength Recv WDMPON Int as per G.694.1. Annex-J
Operating Wavelength Trans WDMPON Int as per G.694.1. Annex-J
Opt Output Power WDMPON Int at OLT as per G.694.1. Annex-J
Opt Output Power WDMPON Int at ONT as per G.694.1. Annex-J
16
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
17
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
18
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Mean Launched Power for STM-64 Opt Int as per G.691. Annex-K
Operating Wavelength for STM-64 Opt Int as per G.957. Annex-K
ER Test Parameters for Products
19
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Maximum Transmit Power RFID as per EN 300 220. NFAP. WPC GSR. Annex-G2
Fixed BB Data Transmission Requirements as per ETSI EN 302 502. FCC CFR47 part 15.249. Annex-G3
EIRP for RF Mesh as per EN 300 220-1 or FCC part 15.247. Annex-G2
Frequency of Operation for RF Mesh Int as per NFAP. Annex-G1
Maximum Transmit Power RF Mesh as per EN 300 220-1 or FCC part 15.247. Annex-G2
Unwanted Emission in Spurious Domain RF Mesh as per EN 300 220 or FCC part 15.247. Annex-G3
Compliance to 6LowPAN Standard as per IEEE 802.15.4. Annex-G3
Compliance to ZigBee Standard as per IEEE 802.15.4. Annex-G3
EIRP LoRa as per EN 300 220-1 or FCC part 15.247. Annex-G2
Frequency of Operation for LoRa Int as per EN 300 220. NFAP. WPC GSR. Annex-G1
Maximum Transmit Power LoRa as per EN 300 220-1 or FCC part 15.247. Annex-G2
Unwanted Emission in Spurious Domain LoRa as per EN 300 220 or FCC part 15.247. Annex-G3
EIRP SigFox as per EN 300 220-1 or FCC part 15.247. Annex-G2
Frequency of Operation for SigFox Int as per EN 300 220. NFAP. WPC GSR. Annex-G1
Maximum Transmit Power SigFox as per EN 300 220-1 or FCC part 15.247. Annex-G2
Unwanted Emission in Spurious Domain SigFox as per EN 300 220 or FCC part 15.247. Annex-G3
Conformance to standards for MRTS as per ETSI EN 300xxx, 301-xxx. Annex-C3
Frequency Band For MRTS as per NFAP. Annex-C1
20
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
Max RF Power Output for MRTS Base Stn as per GSR from WPC. Annex-C2
Max RF Power Output MRTS Mobile Stn as per GSR from WPC. Annex-C2
Max RF Power Output MRTS Handheld Stn as per GSR from WPC. Annex-C2
Max RF Power Output for MRTS Fixed Stn as per GSR from WPC. Annex-C2
ER Test Parameters for Radio Conformance of Products or Interfaces
Conformance to standards for HF Radio Systems as per ETSI EN 300433, 301783, 303402. Annex-C3
Frequency for HF equipments as per NFAP. Annex-C1
Max Transmit Power for HF Base Stn as per GSR from WPC. Annex-C2
Max Transmit Power for HF Mobile Stn as per GSR from WPC. Annex-C2
Max Transmit Power for HF HH Stn as per GSR from WPC. Annex-C2
Max Transmit Power for HF Fixed Stn as per GSR from WPC. Annex-C2
15.RADCONF
Conformance to standards for VHF/UHF Radio Systems as per ETSI EN 300xxx, 301-xxx. Annex-C3
Frequency for UHF/ VHF equipments as per NFAP. Annex-C1
Max Transmit Power for UHF/VHF Base Stn as per GSR from WPC. Annex-C2
Max Transmit Power for UHF/VHF Mob Stn as per GSR from WPC. Annex-C2
Max Transmit Power for UHF/VHF HH Stn as per GSR from WPC. Annex-C2
Max Transmit Power for UHF/VHF Fixed Stn as per GSR from WPC. Annex-C2
Frequency for PMP Radio Interface as per NFAP. Annex-C1
Frequency for PTP Radio Interface as per NFAP. Annex-C1
PMP Fixed Digital Radio Requirements as per ETSI EN 302 326-2. Annex-C3
PTP Fixed Digital Radio Requirements as per ETSI EN 302 217-2. Annex-C3
Transmit Power for PMP Radio Interface as per ETSI EN 302 217-2, EN 302 326-2. Annex-C2
Transmit Power for PTP Radio interface as per ETSI EN 302 217-2, EN 302 326-2. Annex-C2
EIRP for Cordless Telephone as per GSR issued by WPC. Annex-D2
Frequency Band For Cordless Telephone as per GSR issued by WPC. Annex-D2
Spurious Emissions for Cordless Phone as per Annex-D2
Transmit Power for Cordless Telephone as per Annex-D2
Frequency of Operation - Satellite Equipment as per NFAP. Annex-C1
Transmit Power - Satellite Equipment as per GSR from WPC. Annex-C2
Conformance to standards for Satellite as per ETSI EN 301 443, ETSI EN 301 428. Annex-C3
21
Applicable
Standard(s)/
Product(s) Name Specification (s) Test(s) Name, Specification/Standard-wise
Name/ ER Parameter
Module Group Name
SAR Parameters
for Mobile 16.SARMOB SAR Value for Mobile Handset as per IEC 62209-1:2005, TEC/GR/SAR/001/01.MAR.09. Annex-M
Handset
22