Professional Documents
Culture Documents
Print Exit
BRAKE (FRONT) FRONT BRAKE FLEXIBLE HOSE(for 4WD and Pre-Runner) REMOVAL
HINT:
· Use the same procedure for the RH and LH sides.
· The procedure listed below is for the LH side.
PROCEDURE
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.
a. Disconnect the brake line from the front flexible hose with a union nut wrench while holding the front
flexible hose with a wrench.
NOTICE:
· Do not bend or damage the brake tube.
· Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting
point.
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…anual/repair/contents/RM100000000MGKN.html?PUB_TYPE=RM&MODE=1 Page 1 of 2
Print-Toyota Service Information 11/3/17, 10(01 pm
a. Using a union nut wrench, remove the front No. 1 wheel cylinder tube LH from the disc brake cylinder
assembly LH.
NOTICE:
· Do not bend or damage the front No. 1 wheel cylinder tube LH.
· Do not allow any foreign matter such as dirt and dust to enter the front No. 1 wheel cylinder tube
LH from the connecting points.
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…anual/repair/contents/RM100000000MGKN.html?PUB_TYPE=RM&MODE=1 Page 2 of 2