5.) Take tank, hose and nozzle as point 1,2,3. Gage pressure at tank is given 3 kPa (P1). Using Bernoulli’s equation : Now, we obtained the velocity for nozzle. Using mass conservation and Bernoulli equation. We can obtain information in hose. Chapter 3 – General Energy Equation
2.) Height of the tank from the reservoir = 25 m
Volume Flow rate : 25 l/s
Power Input = 10kW
The irreversible head loss for the piping system = 7 m
3.) 4.) A submersible pump with a shaft power of 5 kW and an efficiency of 72% is used to pump water from a lake to pool through a constant diameter pipe, to a tank 25 m above the lake surface. If the irreversible head loss in the piping system is 4 m, determine the discharge rate of water and the pressure difference across the pump.