Professional Documents
Culture Documents
The AP4313 is a highly integrated solution for a con- · Constant Voltage and Constant Current Control
stant voltage/constant current mode SMPS application. · Precision Internal Voltage Reference
· Few External Components
The AP4313 contains one 1.21V voltage reference
· Easy Compensation
with ±1% accuracy, one current sensing circuit and two
operational amplifiers. Combining the voltage refer-
ence with one operational amplifier makes AP4313 an Applications
ideal voltage controller for use in adapters and battery
chargers. The other low voltage reference combined · Adapters
with the other operational amplifier makes it an ideal · Battery Chargers
current limiter for output low side current sensing.
SOT-23-6
1
Preliminary Datasheet
K Package
(SOT-23-6)
VCTRL 1 6 VCC
GND 2 5 VSENSE
VOUT 3 4 ICTRL
Pin Description
2 GND Ground
2
Preliminary Datasheet
1.210V
3
VOUT
1
VCTRL
200mV
2
GND
4 5
ICTRL VSENSE
Ordering Information
AP4313 -
BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant.
3
Preliminary Datasheet
Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated
under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods
may affect device reliability.
4
Preliminary Datasheet
5
Preliminary Datasheet
1.225 202
201 VCC=12V
1.220
VCC=5V
200 VCC=2.5V
1.215
199
VSENSE (V)
VREF (V)
1.210
198
1.205
197
1.200
196
1.195 195
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120
o o
Ambient Temperature ( C) Ambient Temperature ( C)
Figure 4. VREF vs. Ambient Temperature Figure 5. VSENSE vs. Ambient Temperature
80 45
VCC=12V VCC=12V
60 40
VCC=5V VCC=5V
VCC=2.5V VCC=2.5V
40 35
IIBI (µA)
IIBV (nA)
20 30
0 25
-20 20
-40 15
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120
o o
Ambient Temperature ( C) Ambient Temperature ( C)
Figure 6. VCTRL Pin Input Bias Current vs. Figure 7. ICTRL Pin Input Bias Current vs.
Ambient Temperature Ambient Temperature
6
Preliminary Datasheet
60 1.6
1.4 VCC=12V
50
VCC=5V
1.2
VCC=2.5V
40
1.0
IOS (mA)
ICC (mA)
30 0.8
0.6
20 VCC=12V
VCC=5V 0.4
10 VCC=2.5V
0.2
0 0.0
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120
o o
Ambient Temperature ( C) Ambient Temperature ( C)
Figure 8. Output Short Circuit Current vs. Figure 9. Supply Current vs. Ambient Temperature
Ambient Temperature
7
Preliminary Datasheet
VOUT
To primary
R2
AP4313
VCC
R4
1.210V R3 C1
VOUT
C2 470K
2.2nF
VCTRL 22pF Load
C3
200mV 2.2nF
GND
R5
ICTRL VSENSE 22K
R1
R6
500
GND
R7
8
Preliminary Datasheet
0°
2.820(0.111)
8°
3.020(0.119)
0.300(0.012) 0.200(0.008)
0.400(0.016)
0.300(0.012)
0.600(0.024)
2.650(0.104)
2.950(0.116)
1.500(0.059)
1.700(0.067)
0.700(0.028)REF
0.950(0.037)TYP
0.000(0.000) 0.100(0.004)
1.800(0.071)
0.100(0.004) 0.200(0.008)
2.000(0.079)
1.050(0.041) 1.050(0.041)
1.150(0.045) 1.250(0.049)
9
http://www.bcdsemi.com
IMPORTANT NOTICE
BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi-
cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any
particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use
of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or
other rights nor the rights of others.
MAIN SITE
BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited
- Wafer Fab - IC Design Group
Shanghai SIM-BCD Semiconductor Manufacturing Limited Advanced Analog Circuits (Shanghai) Corporation
800, Yi Shan Road, Shanghai 200233, China 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 Tel: +86-21-6495 9539, Fax: +86-21-6485 9673