You are on page 1of 3

Goodbye Pump problems!

ABEL EM pump
We remove the common weaknesses

EXPENSIVE SEAL SHAFT


MECHANICAL PACKING
COMPRESSED WATER WEAR
SEAL
AIR

Diaphragm Pumps
Solids Handling Pumps www.abelpumps.com
High Pressure Pumps
Marine Pumps
ABEL EM PUMPS – The problem solver
PUMP FACTS
Did You know that…

 80 % of Pump Failures are a result of mechanical seal failure!


 Mag Drive Pumps do not work well with solids or dry-run
 Lobe pumps require 2 mechanical seals & close tolerances do not do well with solids
 Progressive cavity pumps cannot run dry even for a few seconds and they lose efficiency
immediately as soon as the stator begins to wear
 Disc Trunion pumps need a 6-8 month inspection, are only rated for 45 PSI & require crawling
under or a hoist to repair
 Air Pumps use 500% to 1,000% more electric energy costs Vs. a heavy & severe duty ABEL Pump
 45 % of the life cycle costs are the electricity cost of the pump
 30 % of the electricity cost in the industry are caused by pump systems

We are ABEL to do it
ABEL EM Pump benefits
Why we are the right choice

 No seal failures, less spare parts  EM passes solids, fruit particles and
 No leaking braided packing or pump wipes
damage  Easier repairs while piped inline
 Solid content up to 80%  Visual leak detection included
 ABEL Pumps can run dry  A leak detection chamber contains all
 No internal slip leakage within the pump
 90% pumping efficiency  No high compressor costs, air leaks or
 VFD Capable frozen air lines
 Self-priming design  EM provides a reduced life cycle cost
 Accommodates a wide range of particle
sizes
 Small number of wear parts

Save time and money


EASY REPAIR
Everyone can do it

 ABEL’s EM Pump is simpler to work on from the side


 No need to crawl under or lift the pump to repair
 Easier disassembly and repair while still piped inline
 No Packing or mechanical seals
 Complete leak detection for housekeeping and safety
 No difficult rotor stator or hoses to repair or replace

Diaphragm Pumps
Solids Handling Pumps www.abelpumps.com
High Pressure Pumps
Marine Pumps
The pumping solution for your industry:
 Mining
 Water and Wastewater
 Ceramics
 Chemistry
 Oil and gas
 Energy industry
Diaphragm Pumps
 Corrugated board Solids Handling Pumps
 Paint and varnish High Pressure Pumps
Marine Pumps
 Petrochemical

For North America For Spain, Portugal, Central and South America

ABEL Pumps, L.P. ABEL Equipos S.A.


Phone +1 (412) 741 3222 Phone +34 (91) 715 4848
Fax +1 (412) 2599
mail@abelpumps.com mail@abelequipos.es

ABEL GmbH Phone: +49 (4155) 818-0


Abel-Twiete 1 Fax: +49 (4155) 818-499 www.abelpumps.com
21514 Büchen E-Mail: mail@abel.de
Germany

You might also like