Professional Documents
Culture Documents
)
Electrical Engineer
(403) 971-8966 | hussam72.haddad@gmail.com | www.linkedin.com/in/hussamhaddad
Profile: Over 18 years of Electrical Engineering proficiency with proven track record of completing multi-disciplinary
mega, medium and small-scale projects on schedule and within approved budgets. Able to plan, control and manage
projects from conceptual phase, engineering, and construction till close out. Excellent interpersonal and problem solving
skills, results driven attitude to manage projects independently or contribute as a team player
QUALIFICATION HIGHLIGHTS
MV/HV Substation and Switchgear Design Experience and Knowledge in NEC, NFPA, IEEE,
Contract Negotiations CSA and NETA standards
Project Management Root Cause Failure Analysis RCFA Investigation
DESIGN EXPERIENCE
Designed auxiliary power systems on a 2000MW four converter stations for Eastern and Western Alberta Power and
Transmission HVDC mega projects for Altalink and ATCO
Directed engineering design of $200 million project contract for upstream Seven Generations Natural Gas Liquid Power
Plant. Managed, designed and controlled critical delivery schedule of $3M project contract for Pulp and Paper project in
Thunder Bay
Coordinated Keystone XL Pipeline project site activities, inspected all equipment and materials supplied for 22 pump-
stations. Over $550M contract for the mechanical and electrical equipment delivery, testing, supervision and start up
activities
Developed project deliverables including;
o One Line and Three Line Diagrams o MCC’s, UPS and Automatic Transfer System
o Substation Automation and Communication o Transformers and Diesel Generators
o PLC and Ground Grid o Conductor sizing and Cable Raceway
o Load Calculations & ARC Flash Study o Battery Banks and Battery Chargers
o Hazardous Area Classification
SUPERVISORY EXPERIENCE
Electrical Power Systems Design Study-Load Flow and Short Circuit
Project planning and scheduling meetings with internal team, safety personnel, engineering, project manager and regular
meetings with clients and contractors
Exceptional time management and organizational skills and proven ability to complete project deliverables of multiple
concurrent project assignments on time and on budget
Assisted Construction Manager in resolving design contradictions, prepared permits to work, organizing work activities,
reviewed test results and coordinated retesting requirement
Reported on progress on projects for quality assurance on a weekly basis
Performed as lead engineer on up to $550 million, developed and maintained man-hour budgets, manpower
requirements and project schedules
Assigned work to electrical personnel to ensure the best utilization of their knowledge and capabilities
Planned, scheduled, managed and coordinated program of assigned engineering projects
Page |1
PROFESSIONAL EXPERIENCE
Lead Electrical Engineer/ Project Manager, Qulliq Energy Corporation, Iqaluit, NU 09/2019
Responsible for providing power generation technical support and electrical system design services for multiple projects
throughout the project cycle from conceptual design until project completion
Key Accomplishments
Determining technical design details and criteria, project planning, and materials selection
Creating bid packages, specifications and technical contracts for building new power plants, upgrading existing facilities,
including gensets, and control and protection equipment replacements
Evaluating electrical and control systems and issuing technical study reports for possible future projects and upgrades
Preparing project brief and cost analysis for Government of Nunavut budget approval
Participating in proponents’ evaluation during bidding stage and providing design support.
Supervising and managing contractors and vendors during project planning, front end and detailed engineering design,
construction and job execution until final completion and project closing
Performing on-site electrical inspection and supervision during construction and project execution
Ensuring capital projects and operational & maintenance related projects are on schedule and within budget in
collaboration with other disciplines and stakeholders
Commissioning Lead, GE Grid Solutions, Churchill Falls to St. John’s, NL 2016 – 2018
Tested, verified and inspected $800 million Lower Churchill HVDC Transmission and Distribution project on five
substations in Newfoundland and Labrador on a 900MW transmission line.
Key Accomplishments
Developed Medium Voltage Metal Clad 15KV Switchgear (20 Cells) commissioning specification and prepared
mechanical completion check sheets to ensure proper project monitoring and engineering best practices are fulfilled
Reviewed and approved overhead and underground distribution activities, 138KV GIS (20 Bays), MiCOM Agile, ABB
and Alstom IEDs relays, 315/138KV 100MVA Power Transformers and HV AIS switchyard equipment drawings and
installation documents as well as supervised testing and commissioning activities
Engaged executive management and key clients in problem solving negotiations
Conducted tailboard daily meetings, to ensure continual safety, Lockout/Tagout procedure, PPE, and work permits for
personnel safety & risk mitigation resulting in 1.5 years accident free record
Guided construction team to meet client expectations, avoiding time delay and organizational political complexity,
reducing lag time by 6 weeks
Through calm diplomacy coordinated and directed engineers and technicians from multiple teams. Resolved conflict
resolutions resulting in increased efficiency of day-to-day operations
Page |2
Key Accomplishments
Rehabilitated five substations 13.8KV/480Vac provided complete design upgrade included medium and low voltage
switchgear, motor control centre, associated protection relays and meterings according to applicable standards
Developed project phases, work packages, specifications and deadlines. Led 5-7 engineers on technical and supervisory
level to ensure final contracts on time and within budget
Designed Programmable Logic Controller (PLC) & HMI configuration, Remote Terminal Units, and control system
architecture using Plot Plan, Piping & Instrumentation Diagrams (P&ID) and Instrument Index
Evaluated bid packages control systems and detailed engineering design assured cohesiveness and consistency
Organized 15-20 supervisors and technicians in the field. Concluded a 12-day assignment in a 6-day window due to time
constraint
Electrical Engineer, Siemens Power Grid, Calgary, AB 2011 – 2013
Designed 25KV auxiliary power systems on Eastern and Western Alberta Power and Transmission 500KV HVDC mega
projects for Altalink and ATCO
Key Accomplishments
Defined bill of material, scope of work, and prepared auxiliary power system technical specifications for both projects
Maintained fluid communication with other disciplines engineers, vendors, contractors and senior management
Directed substation design and procurement activities performed bid evaluations taking into consideration continuity of
service and technical design integrity. Engineered multi-lateral products and services 30% of my time
Studied detailed engineering design drawings, equipment sizing, load list, single-line diagram and detailed drawings to
ensure compliance with building codes
Commissioning Manager, Siemens Energy, Calgary, AB 2009 – 2011
Coordinated Keystone XL Pipeline project site activities and allocated resources
Key Accomplishment
Developed engineering deliverables and promoted closure of Nonconformity Reports (NCRs) with correct
documentation that addressed customers concerns
Participated in Factory Acceptance Tests (FAT) on ehouses substation power equipment to ensure product compliance
Handled Site Acceptance Tests (SAT) through visual inspection and deploying PLC for monitoring and controlling states
of devices in conformity with approved drawings and protection philosophy
Troubleshot and oversaw testing of 4160Vac 5750HP variable speed drives ROBICON Perfect Harmony applied
approved interlocking control philosophy and safety procedure
Supervised 8-12 service engineers. Managed large-scale and complex projects across multiple products. Ensured effective
usage of project resources, cost effectiveness and timely delivery
AFFILIATIONS
The Association of Professional Engineers and Geoscientists of Alberta (APEGA), License 137779
NWT and Nunavut Association of Professional Engineers and Geoscientists (NAPEG), License 2052
The Institute of Electrical & Electronics Engineers (IEEE) member of PES/IAS Chapter
Page |3