You are on page 1of 76

PROCESS AND MATERIAL SPECIFICATION

AIRBUS A00710050

TECHNICAL NOTES (TN)

NON-METALLIC ANTI-CORROSIVE
COATINGS

(PAINTS-VARNISHES)

Published and distributed by:


Airbus S.A.S
Engineering Directorate
31707 Blagnac Cedex
France

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 1
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050

CONTENTS

1. GENERAL

1.1 Introduction

1.2 Non metallic materials affected by this Technical

1.3 Application of the Technical note

1.3.1 By the Engineering


1.3.2 By other Departments (Procurement, Production, Customer services)

2. TABLES OF QUALIFIED-EQUIVALENT AND SUBSTITUTE MATERIALS

2.1 Definition of the columns

2.1.1 Ref
2.1.2 Natco
2.1.3 Material
2.1.4 Standard or Specification
2.1.5 Individual Product Specification
2.1.6 Manufacturer
2.1.7 Product Designation
2.1.8 EHS Status
2.1.9 Drawing designation
2.1.10 Process Specification
2.1.11 Equivalent or Substitute
2.1.12 Comments
2.1.13 No longer to be used

2.2 Selection tables

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 2
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
1. GENERAL
1.1 Introduction

This technical note is one of a series of TNெs concerning the selection for non metallic anti-
corrosive coatings used on aircraft parts.
This technical Note provides the list of couples “materials/suppliers” which have been technically
qualified according to AIRBUS qualification process. It is applicable to all AIRBUS aircraft.
This Technical Note is written in accordance with ABD0045.

1.2 Non metallic materials affected by this Technical Note

They are divided into the following categories:


Individual chapter references per document to be added here in the format:
Material A ( abcdef….xyz) (references used : 1,2,3,4,…; new references to be used : 1 to …)
Material B ( def…rstu ) (references used : 11,12,13,14,…; new references to be used : 20 to …)
In brackets:
the reference numbers previously allocated to each material family and shown in the selection ta-
bles,
the new references to be allocated to material families qualified in future (in order to organize the
table of qualified-equivalent and substitute materials).

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 3
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
1.3 Application of the Technical note

1.3.1 By the Design Offices

Selection of materials :
The Design Offices of the Airbus Natco shall use only the materials listed in this doc-
ument.
Instructions to be given on drawings:
These instructions are mentioned in the column « CODES » (see sub-clause 2.1.9).
Airbus France refers to the following codes on its drawings:
í PQ10006-XXX-00,
í or dimensional codes as ASNA 3XXX and ASNA 5XXX (which refers to the
PQ10006-XXX-00).
1.3.2 By Other Departments (Procurement, Production)

Procurement is made by means of the indications given on the drawings:

í specification references,
í or other references.

Production requirements are given in the process documents mentioned in the pro-
cess specification column of the tables.

Note : Missing specifications are in the process of being prepared. If a Natco has to
produce a part to a drawing of another Natco and no equivalent material is
available in that Natco’s company, the procurement shall be carried out using
the specification quoted on the drawing.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 4
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
2. TABLES OF QUALIFIED-EQUIVALENT AND SUBSTITUTE MATERIALS

2.1 Definition of the columns

2.1.1 Ref
Identification number of row

2.1.2 Natco
Airbus sites where the product was originally qualfied

2.1.3 Material
Definition of the material family which consists of a brief description of the material.

2.1.4 Standard or Specification.


Defines the corresponding material specification (e.g: AIMS) or semi-finished
product standards (e.g: ABS) used during the technical qualification and inspec-
tion are stated in this column.

2.1.5 Individual Product Specification


It contains the release specification. The Individual Product Specification (e.g
:IPS) identifies a product from a manufacturer that have been technically and
successfully qualified
Examples:
IPS for all Airbus Natco

2.1.6 Manufacturer
The manufacturer name of the product is stated in this column.
Note: If needed by the business, Cage Code of the manufacturer production site
may be added between bracket sunder the name of manufacturer

2.1.7 Product Designation


The manufacturerெs product reference is stated in this column.
2.1.8 EHS status
Value of EHS assessment: Low, Medium or High. When no assessment per-
formed: Not assessed will be added.

2.1.9 Drawing designation


The drawing designation corresponds to the reference of standard (ABS semi-
finished product) or material code (e.g PQ, Z ,..) to be used on the drawing.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 5
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050

2.1.10 Process specification

Defines the corresponding the process requirements document to be used for


manufacturing operations.
Example:
AIPS for all Airbus Natcos

2.1.11 Equivalent or substitute

Each qualified product is allocated to an alphanumeric reference which ap-


pears in the „ெequivalence columnெெ. This reference is composed of a number
and a letter (1A, 1B....).
The number is the same as the reference number which appears in the first
column.
The letter gives the equivalence between the qualified products which belong
to the same material family (same reference number).
The equivalent products which belong to the same material family have the
same alphanumeric reference. The products which belong to the same materi-
al family but which are not equivalent have the same reference number but dif-
ferent letters.
The products which are not equivalent are separated by a broken line.
In some cases, products from the same material family are not strictly equiva-
lent because they canெt be used for the same application (i.e. certification
problems or process peculiarities).

2.1.12 Comments

When a box in the Remarks / application column is empty this indicates that
there are no restrictions on the use of the material.
Notes e.g.: When applicable the box may contain:
No longer available,
To be used for’’.... ‘’only,
Obsolescent (not to be used for new designs).

2.1.13 No longer to be used

When the product is no longer used by the Airbus NatCo, the name of the
NatCo
is mentioned in this column. The reason is mentioned in the “comments” col-
umn

2.2 Selection tables

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 6
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Process
Standard or Inidividual Product Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation Specifica- COMMENTS
Specification Specification Substitute to be
tion
used
1 STRUCTURAL PAINTS FOR METALLIC SUBSTRATES
1 F Epoxy pri- - - PPG Aerospace / base : F580-2010 - PQ10050-001-00 - - -
mer.(strontium UK hardener : F273-5076
chromate) thinner : F850-805 F
1 A-UK Epoxy pri- - - PPG Aerospace / base : F850-805 - - - - -
mer.(strontium UK hardener : F273-5076
chromate) thinner : F850-805 A-UK
1 A-E Epoxy pri- - - PPG Aerospace / base : F850-2010 - Z-12.101 I+D-P-60 - Replaced by Z-
mer.(strontium UK hardener : F273-5076 12.113
chromate) thinner : F850-805 A-E
1 A-F Epoxy pri- TNA00710012 - PPG Aerospace / base : F580-2080 - ASNA5145 - - Replaced by
mer.(strontium Type I UK hardener : F275-175 PQ10050-001-00 PQ10050-002-00
chromate) thinner : F850-1241 PQ10050-001-02 A-F
1 A-F Epoxy pri- TNA00710012 - PPG Aerospace / base : Intergard 90 - PQ10050-001-00 - - Replaced by
mer.(strontium Type I France 4120/3600 PQ10050-001-03 PQ10050-002-00
chromate) hardener : 0611/9000
thinner : 0515/9000 A-F
1 A-F Epoxy pri- TNA00710012 - Akzo Nobel base : 37057 - PQ10050-001-00 - - Replaced by
mer.(strontium Type I Aerospace hardener : 92108 PQ10050-001-04 PQ10050-002-00
chromate) Coatings thinner : C25/90S
/ Netherland A-F
1 A-UK Epoxy primer. TNA00710012 - PPG Aerospace / base : PR215 - RF ABP4-1123 - Not VOC compliant
(strontium Type I UK hardener : ACT 215 in accordance with
chromate) thinner : T 701 or T UK legislation
705 A-UK
1 A-UK Epoxy pri- TNA00710012 - PPG Aerospace / base : PR143 C4334 - RF ABP4-1123 - Not VOC compliant
mer.(strontium Type I UK hardener : ACT143 in accordance with
chromate) C4334 UK legislation
thinner : T17 A-UK
1 A-UK Epoxy pri- AIMS04-04-001 IPS04-04-001-03 PPG Aerospace / base : PR205 - RF ABP4-1123 - -
mer.(strontium AIMS04-04-004 IPS04-04-004-02 UK hardener : ACT 205 AIPS05-02-
chromate) 009 -
1 A-UK Epoxy pri- AIMS04-04-001 IPS04-04-001-15 Aerospace base : Aerodur HS - PQ10050-001-00 ABP4-1123 -
mer.(strontium AIMS04-04-004 - IPS04-04-004-08 Coatings / primer 37092 PQ10050-001-05 AIPS05-02-
chromate) 04-038 AIMS04- IPS04-04-038-05 Netherland hardener : 92217 009
04-042 IPS04-04-042-04 Akzo
NobelAIMS04
1 A-UK Epoxy pri- TNA00710012 - Akzo Nobel base : 37035 - RF ABP4-1123 -
mer.(strontium Type I Aerospace hardener : 92095
chromate) Coatings thinner : C25/90S
/ Netherland A-UK
1 A-UK Epoxy pri- AIMS04-04-001 - Akzo Nobel base : 37035A - RF ABP4-1123 - Not VOC compliant
mer.(strontium TNA00710012 IPS04-04-001-02 Aerospace hardener : 92140 in accordance with
chromate) Type I Coatings thinner : 98064 or UK legislation
/ Netherland C25/90S A-UK

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 7
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Process
Standard or Inidividual Product Product Designa- Equivalent or longer
Ref Natco Material Manufacturer EHS Status Drawing Designation Specifica- COMMENTS
Specification Specification tion. Substitute to be
tion
used
base : 9169-P-3000
Epoxy pri-
TNA00710012 hardener : 3000-7-
1 A-UK mer.(strontium - PPG Aerospace - - ABP4-1123 - Replaced by R.F. A-UK
Type I 0160
chromate)
thinner : 2000-6-0032
Akzo Nobel
Epoxy pri- base: European 37068
TNA00710012 Aerospace
1 A-UK mer.(strontium - hardener: 92093 - - ABP4-1123 - Replaced by R.F. A-UK
Type I Coatings
chromate) thinner : 99015
/ Netherland
Epoxy primer. base : PR215 withdrawn ,
TNA00710012
1 A-D (strontium - PPG Aerospace hardener : ACT 215 - TNA00710003MT1 1 80-T-35-5002 - replaced by A-D
Type I
chromate) thinner : N39956 Mankiewicz
1 A-D Epoxy pri- - PPG Aerospace base : Intergard 90 - TNA00710003MT1 1 80-T-35-5002 - not listed in 80-T- A-D
AIMS04-04-001
mer.(strontium 4120/3600 35-5002
TNA00710012
chromate) hardener : 0611/9000
Type I
thinner: 0515/9000
base : Intergard 90 80-T-35-5002
AIMS04-04-001 IPS04-04-001-06 4120/5141 AIPS05-02-
1 A-D PPG Aerospace - - -
hardener : 0611/9000 009
thinner : 0515/9001
AIMS04-04-001 80-T-35-5002
75-T-2-5714-3-1 Akzo Nobel AIPS05-02-
Epoxy pri- AIMS04-04-004 base : 37035A
IPS04-04-001-02 Aerospace 009
1 A-D mer.(strontium AIMS04-04-038 hardener : 92140 - TNA00710003MT1/T2 - - -A-D
IPS04-04-004-07 Coatings/
chromate) TNA00710012 thinner : 98064
IPS04-04-038-04 Netherland
Type I
AIMS04-04-001 IPS04-04-001-08 Akzo Nobel base : 37035A 80-T-35-5002
Epoxy pri- hardener : 92162 AIPS05-02-
AIMS04-04-004 IPS04-04-004-19 Aerospace
1 A-D mer.(strontium - TNA00710003MT2 1 009 - -
AIMS-04-038 IPS04-04-038-09 Coatings
chromate)
AIMS04-04-042 IPS04-04-042-01 / Netherland
1 A-D Epoxy pri- Akzo Nobel - - - -
AIMS04-04-001 IPS04-04-001-10 base : 37035A-702267 80-T-35-5002
mer.(strontium Aerospace
AIMS04-04-038 IPS04-04-038-10 hardener : 92162- AIPS05-02-
chromate) Coatings
AIMS04-04-042 IPS04-04-042-02 000000 009
/ Netherland
base : 37035A-702267 80-T-35-5002
Akzo Nobel
Epoxy pri- AIMS04-04-001 IPS04-04-001-11 hardener : 92162- AIPS05-02-
Aerospace
1 A-D mer.(strontium AIMS 04-04-038 IPS04-04-038-11 000000 - - 009 - - -
Coatings
chromate) AIMS04-04-042 IPS04-04-042-03 thinner : 96184 or
/ Netherland
98064 or C25/905
AIMS04-04-001 base : Seevenax 113- 80-T-35-5002
Epoxy pri- 75-T-2-5713-4-1 AIPS05-02-
AIMS04-04-038 22
1 A-D mer.(strontium IPS04-04-001-05 MANKIEWICZ - TNA00710003MT1/T2 009 - - -
TNA00710012 hardener : 135-20
chromate) IPS04-04-038-03
Type I thinner : 900-75
Epoxy pri- base : Seevenax 113- 80-T-35-5002
AIMS04-04-001 IPS04-04-001-09
1 A-D mer.(strontium MANKIEWICZ 82 - TNA00710003MT2 1 AIPS05-02- - - -
AIMS04-04-038 IPS04-04-038-08
chromate) hardener : 135-80 009
base : PR215
Epoxy primer.
TNA00710012 PPG Aerospace / hardener : ACT 215
1 SON (strontium - - 308 SO PS6.6007.01 - - -
Type I UK thinner : N39956 or
chromate)
T701
Epoxy primer. base : PR215 AIPS 05-02-
PPG Aerospace /
1 A-E (strontium AIMS04-04-001 IPS04-04-001-04 hardener : ACT 215 - Z-12.113 009 - -
UK
chromate) thinner : T701 I+D-P-60
Akzo Nobel
Epoxy pri- base : 37035A-702267 AIPS05-02- Inactive for
Aerospace
1 A-E mer.(strontium AIMS04-04-001 IPS04-04-001-11 hardener : 92140 - Z-12.113 009 - procurement after
Coatings
chromate) thinner : 98064 I+D-P-60 11/10
/ Netherland

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 8
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Akzo Nobel
Epoxy pri- base : 37035A
Aerospace AIPS05-02-
1 A-E mer.(strontium AIMS04-04-004 IPS04-04-004-07 hardener : 92140 - - - - -
Coatings 009
chromate) thinner : C25/90S
/ Netherland
base : F580-2080
Epoxy primer. Not VOC compliant
TNA00710012 PPG Aerospace / hardener : F275-160
1 A-UK (strontium - - RF ABP4-1123 - in accordance with A-UK
Type I UK thinner : F850-1241 or
chromate) UK legislation
F850-1264
Akzo Nobel base : US Version 463-
Epoxy pri-
TNA00710012 Aerospace 07-0048
1 A-UK mer.(strontium - - - ABP4-1123 - Replaced by R.F. A-UK
Type I Coatings hardener : X499
chromate)
/ USA thinner : TL74
Epoxy primer. withdrawn ,
TNA00710012 base : F580-2080
1 A-D (strontium - PPG Aerospace - TNA00710003MT1 1 80-T-35-5002 - replaced by A-D
Type I hardener : F275-160
chromate) Mankiewicz
Epoxy primer. base : F580-2080
TNA00710012 PPG Aerospace /
1 SON (strontium - hardener : F275-160 - 308 SO PS6.6007.01 - - -
Type I UK
chromate) thinner : F850-1241
Epoxy primer. base : F580-2080 AIPS 05-02-
PPG Aerospace /
1 A-E (strontium AIMS04-04-001 IPS04-04-001-04 hardener : F275-160 - Z-12.113 009 - - -
UK
chromate) thinner : F850-1241 I+D-P-60
75-T-2-5714-3-1
- Akzo Nobel
IPS04-04-001-02 base : 37035A 80-T-35-5002
AIMS04-04-001 Aerospace
1 A-D - IPS04-04-038-04 hardener : 92140 - TNA00710003MT1/T2 AIPS05-02- - - -
AIMS04-04-038 Coatings / Nether-
IPS04-04-042-09 thinner : 98064 009
AIMS04-04-042 land
Aerodur primer
Akzo Nobel
Polyurethane S15/90
TNA00710012 Aerospace PQ10050-002-00
2 A-F primer.Strontium ASNA4288 base : S15/90-37201 - IPDA64-02 - - -
Type I Coatings PQ10050-002-02
chromate hardener : S66/22R
/ Netherland
thinner : C25/90S
Aerodur primer
Akzo Nobel
Polyurethane S15/90 ASNA5143
TNA00710012 Aerospace
2 A-F primer.Strontium ASNA4174 base : S15/90-37214 - PQ10050-002-00 - - - -
Type I Coatings
chromate hardener : S66/14 PQ10050-002-05
/ Netherland
thinner : 98064
Polyurethane ABP4-1123
AIMS04-04-001 IPS04-04-001-22 base : CA7045
2 A-UK primer.Strontium PPG Aerospace - RF AIPS05-02- - - -
AIMS04-04-004 IPS04-04-004-15 hardener : CA7045B
chromate 009
Aerodur primer
Akzo Nobel
Polyurethane S15/90
TNA00710012 Aerospace
2 SON primer.Strontium - base : S15/90 - 300 SO PS 6.6002.01 - - -
Type I Coatings
chromate hardener : S66/22R
/ Netherland
hardener : C25/90S
Aerodur primer
Akzo Nobel the material is still listed in 80-T-35
Polyurethane S15/90
TNA00710012 Aerospace 5008. Why should it not be used by
2 A-D primer.Strontium - base : S15/90 - TNA00710003MT1 2 80-T-35-5008 - A-D
Type I Coatings A-
chromate hardener : S66/22R
/ Netherland D?
hardener : C25/90S
Aerodur primer
Akzo Nobel
Polyurethane S15/90
Aerospace
2 A-E primer.Strontium AIMS04-04-001 ASNA4288 base : S15/90 - Z-12.105 I+D-P-60 - - A-E
Coatings
chromate hardener : S66/22R
/ Netherland
hardener : C25/90S
Aerodur primer
Akzo Nobel
Polyurethane S15/90
TNA00710012 Aerospace
2 A-F primer.Strontium ASNA4288 base : S15/90 - PQ10050-002-00 TH6.7365 - - -
Type I Coatings
chromate hardener : S66/22R
/ Netherland
hardener : C25/90S

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 9
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
for classic spray Pac
Polyurethane 33 ASNA5143
PPG Aerospace / IPDA 64-05
2 A-F primer.Zinc AIMS04-04-001 ASNA4248 base : 4355/3600 - PQ10050-002-00 - - A-F
France IPDA64-02
chromate hardener : 0701/9000 PQ10050-002-01
thinner : 0433/9000
base : for electrostatic
spray Pac33
Polyurethane 4356/3677
TNA00710012 PPG Aerospace / PQ10050-002-00
2 A-F primer.Zinc - hardener : for electro- - - - No longer available A-F
Type I France PQ10050-002-03
chromate static spray 0729/9000
thinner : for electrostat-
ic spray 0557/9000
AIPS 05-02-
- AIMS04-04-001 - Pac 33 NV
Polyurethane PQ10050-002-00 009
AIMS04-04-004 ASNA4257 PPG Aerospace / base : 4359/3600
2 A-F primer.Strontium - PQ10050-002-01 AIPS05-02- - - -
TNA00710012 IPS04-04-001-01 France hardener : 0701/9000
chromate PQ10050-002-04 009
Type I IPS04-04-004-01 thinner : 0477/9000
IPDA64-02
base : N53631/T5-062
Polyurethane
TNA00710012 hardener : N39/1327
2 A-D primer.Zinc - PPG Aerospace - ABP4-1121 80-T-35-5008 - No longer avialable A-G
Type I thinner : N39/3259 or
chromate
N39/3460
Polyurethane base : FL4300
TNA00710012
2 A-D primer.Zinc - BASF-Lackchemie hardener : FL4206 - TNA00710003MT1 2 80-T-35-5008 - No longer avialable A-G
Type I
chromate thinner : FL4207
Alexit 80-T-35-5030
Water based AIMS04-04-001 IPS04-04-001-12
2 A-D MANKIEWICZ base : 343-22 - TNA00710003MT2 AIPS05-02- - - -
chromate primer. AIMS04-04-004 IPS04-04-004-06
hardener : 345-35 009
Alexit 80-T-35-5030
Water based AIMS04-04-001 IPS04-04-001-13
2 A-D MANKIEWICZ base : 343-82 - TNA00710003MT2 AIPS05-02- - - -
chromate primer. AIMS04-04-004 IPS04-04-004-05
hardener : 345-35 009
Alexit 80-T-35-5030
Water based AIMS04-04-001 IPS04-04-001-14
2 A-D MANKIEWICZ base : 343-20 - - AIPS05-02- - - -
chromate primer. AIMS04-04-004 IPS04-04-004-04
hardener : 345-40 009
Akzo Nobel
80-T-35-5030
Water based AIMS04-04-001 IPS04-04-001-18 Aerospace base : 222P01
2 A-D - - AIPS05-02- - Not to be used A-D
chromate primer. AIMS04-04-004 IPS04-04-004-09 Coatings hardener : X-801W
009
/ Netherland
Akzo Nobel
80-T-35-5030
Water based AIMS04-04-001 IPS04-04-001-19 Aerospace base : 222P04
2 A-D - - AIPS05-02- - Not to be used A-D
chromate primer. AIMS04-04-004 IPS04-04-004-10 Coatings hardener : X-805W
009
/ Netherland
Akzo Nobel
80-T-35-5030
Water based AIMS04-04-001 IPS04-04-001-20 Aerospace base : 222P03
2 A-D - - AIPS05-02- - Not to be used A-D
chromate primer. AIMS04-04-004 IPS04-04-004-13 Coatings hardener : X-803W
009
/ Netherland
AIMS04-04-001 IPS04-04-001-23
base : Seevenax 313- 80-T-35-5030
Water based AIMS04-04-004 IPS04-04-004-16
2 A-D MANKIEWICZ 81 - - AIPS05-02- - - -
chromate primer. AIMS04-04-038 IPS04-04-038-02
hardener : 315-80 009
AIMS04-04-042 IPS04-04-042-07
AIMS04-04-001 IPS04-04-001-23
base : Seevenax 313- ABP4-1123
Water based AIMS04-04-004 IPS04-04-004-16
2 A-UK MANKIEWICZ 81 - RF AIPS05-02- - - -
chromate primer. AIMS04-04-038 IPS04-04-038-02
hardener : 315-80 009
AIMS04-04-042 IPS04-04-042-07
base : Seevenax 313-
AIMS04-04-001 IPS04-04-001-24
01 80-T-35-5030
Water based AIMS04-04-004 IPS04-04-004-17
2 A-D MANKIEWICZ hardener : 315-00 - - AIPS05-02- - - -
chromate primer. AIMS04-04-038 IPS04-04-038-06
thinner : Demineralized 009
AIMS04-04-042 IPS04-04-042-06
water

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 10
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
base : Seevenax 313-
AIMS04-04-001 IPS04-04-001-24
01 ABP4-1123
Water based AIMS04-04-004 IPS04-04-004-17
2 A-D MANKIEWICZ hardener : 315-00 - RF AIPS05-02- - - -
chromate primer. AIMS04-04-038 IPS04-04-038-06
thinner : Demineralized 009
AIMS04-04-042 IPS04-04-042-06
water
AIMS04-04-001 IPS04-04-001-25
Akzo Nobel base : Aerowave 2001 ABP4-1123
Water based AIMS04-04-004 IPS04-04-004-18
2 A-UK Aerospace hardener : Curing - RF AIPS05-02- - - -
chromate primer. AIMS04-04-038 IPS04-04-038-01
Coatings Solution 6005 009
AIMS04-04-042 IPS04-04-042-05
AIMS04-04-001 IPS04-04-001-07
base : P60-A ABP4-1123
Water based AIMS04-04-004 IPS04-04-004-03
2 A-UK MAPAERO hardener : P60-A - RF AIPS05-02- - - -
chromate primer. AIMS04-04-038 IPS04-04-038-07
thinner : Distilled Water 009
AIMS04-04-042 IPS04-04-042-08
base : Pac33
Polyurethane 4355/3600
TNA00710012 PPG Aerospace/
2 SON primer.Zinc - hardener : 0701/9000 - 316 SO PS6.6002.01 - - -
Type I France
chromate thinner : 0433/9000 or
0514/9000
for classic spray Pac
Polyurethane 33
PPG Aerospace /
2 A-E primer.Zinc AIMS04-04-001 ASNA4248 base : 4355/3600 - Z-12.105 I+D-P-60 - - A-E
France
chromate hardener : 0701/9000
thinner : 0433/9000
base : N53631/T5-062
Polyurethane
TNA00710012 PPG Aerospace / hardener : N39/1327
2 A-E primer.Zinc - - Z-12.105 I+D-P-60 - - A-E
Type I UK thinner : N39/3259 or
chromate
N39/3460
Polyurethane base : FL4300
TNA00710012
2 A-E primer.Zinc - BASF-Lackchemie hardener : FL4206 - Z-12.105 I+D-P-60 - No longer available A-E
Type I
chromate thinner : FL4207
Akzo Nobel Aerodur primer S15/90
Polyurethane
TNA00710012 Aerospace base : S15/90
2 A-D primer.Strontium - - TNA00710003MT1 2 80-T-35-5008 - - -
Type I Coatings hardener : S66/8RE
chromate
/ Netherland hardener : C25/90ES
Akzo Nobel Aerodur primer S15/90
Polyurethane
TNA00710012 Aerospace base : S15/90
2 A-E primer.Strontium - - Z-12.105 I D-P-60 - - -
Type I Coatings hardener : S66/22R
chromate
/ Netherland hardener : C25/90S
for classic spray Pac
Polyurethane 33 ASNA5143
TNA00710012 PPG Aerospace / IPDA 64-05
2 A-F primer.Zinc ASNA4248 base : 4355/3600 - PQ10050-002-00 - - -
Type I France IPDA64-02
chromate hardener : 0701/9000 PQ10050-002-01
thinner : 0433/9000
for classic spray Pac
Polyurethane 33
TNA00710012 PPG Aerospace /
2 A-E primer.Zinc - base : 4355/3600 - Z-12.105 I D-P-60 - - -
Type I France
chromate hardener : 0701/9000
thinner : 0433/9000
base : PU66
ASNA3603 AIPS05-02-
PPG Aerospace / 5440/2047
3 A-F Interior finish. AIMS04-04-003 IPS04-04-003-01 - PQ10050-003-00 009 - -
France hardener : 0730/9000
PQ10050-003-02 IPDA64-02
thinner : 0491/9000

Akzo Nobel base : Aerodur finish


Aerospace HF77624 PQ10050-003-00
3 A-F Interior finish. TNA00710012 ASNA4175 - - - A-F
Coatings hardener : S66/22R PQ10050-003-03
/ Netherland thinner : C25/90S

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 11
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
base : 9123
PQ10050-003-00
3 A-F Interior finish. TNA00710012 - PPG Aerospace hardener : 7867 - - - No longer available A-F
PQ10050-003-04
thinner : 9124
Akzo Nobel
base : 7D1586
Aerospace PQ10050-003-00
3 A-F Interior finish. TNA00710012 - hardener : 7D1586 - IPDA64-02 - No longer available A-F
Coatings PQ10050-003-05
thinner : 3108
/ France
base : PU66 ASNA3603
PPG Aerospace /
3 A-F Interior finish. TNA00710012 - 5443/2047 - PQ10050-003-00 - - No longer available A-F
France
hardener : 0730/9000 PQ10050-003-06
PPG Aerospace /
3 A-F Interior finish. TNA00710012 - Serie F407-729 - PQ10050-003-00 - - A-F
UK
Akzo Nobel base : Aerodur finish
Aerospace HF77264
3 SON Interior finish. TNA00710012 - - 304 SO PS6.6101.01 - - -
Coatings hardener : S66/22R
/ Netherland thinner : C25/90S
base : PU66 5440 or
PPG Aerospace / 5447
3 SON Interior finish. - - - 319 SO PS6.6101.01 - - -
France hardener : 0730/9000
thinner : 0491/9000
base : Aeromap1000
hardener : Aero-
3 SON Interior finish. - - MAPAERO - 322 SO PS6.6101.01 - -
map1000 6500
thinner : P2
Akzo Nobel base : 7D1586
Aerospace hardener : 7D1586 not listed in 80-T-
3 A-D Interior finish. TNA00710012 - - TNA00710003MT1 8 80-T-35-5106 - A-D
Coatings thinner : 3108 or 35-5106
/ France C25/90S
base : N53624/9.9024
hardener : N39/1327
3 A-D Interior finish. TNA00710012 - PPG Aerospace - TNA00710003MT1 8 80-T-35-5106 - no longer available A-D
thinner : N39/3259 or
N39/3490
base : FL7420
3 A-D Interior finish. TNA00710012 - BASF-Lackchemie hardener : FL4206 - TNA00710003MT1 8 80-T-35-5106 - no longer available A-D
thinner : FL4207
base : Alexit 406-22 80-T-35-5106
AIMS04-04-003 75-T-2-5722-4-1
3 A-D Interior finish. MANKIEWICZ hardener : 400 - TNA00710003MT1/T2 AIPS05-02- - - -
TNA00710012 IPS04-04-003-04
thinner : 901-45 009
80-T-35-5106
base : Alexit 406-82
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-07 MANKIEWICZ - TNA00710003MT2 AIPS05-02- - -
hardener : 405-82
009
Akzo Nobel base : Aerodur finish
80-T-35-5106
Aerospace C21/100
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-08 - TNA00710003MT1/T2 AIPS05-02- - - -
Coatings hardener : S26/22R
009
/ Netherland thinner : C25/90S
Akzo Nobel
base : Aerodur finish 80-T-35-5106
AIMS04-04-003 IPS04-04-003-06 Aerospace
3 A-D Interior finish. C21/100 - TNA00710003MT2 AIPS05-02- - - -
AIMS04-04-041 IPS04-04-041-01 Coatings
hardener : 90120 009
/ Netherland
Akzo Nobel
base : Aerodur finish
Aerospace AIPS05-02-
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-09 C21/100 - - - - -
Coatings 009
hardener : 90120
/ Netherland
base : PU66 5440 or
5447
3 A-D Interior finish. TNA00710012 - PPG Aerospace - TNA00710003MT2 8 80-T-35-5106 - - A-D
hardener : 0730/9000
thinner : 0491/9000

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 12
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Akzo Nobel
base : 7D1586
Aerospace
3 A-E Interior finish. - - hardener : S66/22R - Z-12.380 I+D-P-60 - - A-E
Coatings
thinner : C25/90S
/ France
base : F407-729
PPG Aerospace /
3 A-E Interior finish. - - hardener : F210-731 - Z-12.380 I+D-P-60 - No longer available A-E
UK
thinner : 851-808
base : N53624/9.9024
PPG Aerospace / hardener : N39/1327
3 A-E Interior finish. - - - Z-12.380 I+D-P-60 - - A-E
UK thinner : N39/3259 or
N39/3460
base : for classic
spray, PU66 5440
AIPS05-02-
PPG Aerospace / hardener : for classic
3 A-E Interior finish. AIMS04-04-003 IPS04-04-003-01 - Z-12.380 009 - - -
France spray 0730/9000
I+D-P-60
thinner : for classic
spray 0491/9000
base : F407-654
PPG Aerospace /
3 A-E Interior finish. TNA00710012 - hardener : F210-746 - Z-12.379 I+D-P-60 - -
UK
thinner : 851-808 T74
Akzo Nobel
base : Aerodur 67273
Aerospace
3 A-E Interior finish. TNA00710012 - hardener : S66/22R - Z-12.379 I+D-P-60 - - -
Coatings
thinner : C25/90S
/ Netherland
Akzo Nobel base : C21/100 AIPS05-02-
AIMS04-04-003 IPS04-04-003-03
3 A-E Interior finish. Aerospace hardener : S26/22R - Z-12.380 009 - - -
AIMS04-04-041 IPS04-04-041-03
Coatings thinner : C25/90S I+D-P-60
851-1365
withdrawn-no
base : FE122/627 replacement.Code
PPG Aerospace /
3 A-UK Interior finish. - - hardener : 121 - TR ABP4-2130 - TR covers Primer + A-UK
UK
thinner : T 74 Interior top
coat.FE122/627
dequalified
base : Alexit 341-70 80-T-35-5030
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-10 MANKIEWICZ hardener : 345-35 - TN10003MT2 AIPS05-02- - - -
thinner : water 009
80-T-35-5030
base : 341-71
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-11 MANKIEWICZ - TN10003MT2 AIPS05-02- - - -
hardener : 345-35
009
Akzo Nobel
80-T-35-5030
Aerospace base : 222F02
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-18 - - AIPS05-02- - not to be used A-D
Coatings hardener : X-808W
009
/ Netherland
Akzo Nobel
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-19 Aerospace base : 222F03 - - 80-T-35-5030 - not to be used A-D
Coatings
/ Netherland AIPS05-02-
Akzo Nobel hardener : X-809W 009
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-20 Aerospace base : 222F01 - - 80-T-35-5030 - not to be used A-D
Coatings hardener : X-807W AIPS05-02-
/ Netherland 009
Akzo Nobel
80-T-35-5030
Aerospace base : 222F03
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-21 - - AIPS05-02- - not to be used A-D
Coatings hardener : X-805W
009
/ Netherland

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 13
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Akzo Nobel
80-T-35-5030
Aerospace base : 222F01
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-22 - - AIPS05-02- - not to be used A-D
Coatings hardener : X-807W
009
/ Netherland
Akzo Nobel
80-T-35-5030
Aerospace base : 222F02
3 A-D Interior finish. AIMS04-04-003 IPS04-04-003-25 - - AIPS05-02- - not to be used A-D
Coatings hardener : X-808W
009
/ Netherland
AIMS04-04-003 IPS04-04-003-27 base : Seevenax 311- 80-T-35-5030
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-04 MANKIEWICZ 83 - - AIPS05-02- - not to be used -
AIMS04-04-041 IPS04-04-041-07 hardener : 315-80 009
base : Seevenax 311-
AIMS04-04-003 IPS04-04-003-28 80-T-35-5030
03
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-03 MANKIEWICZ - - AIPS05-02- - -
hardener : 315-00
AIMS04-04-041 IPS04-04-041-06 009
thinner : water
Akzo Nobel
base : Aerowave 3003 ABP4-2130
AIMS04-04-003 IPS04-04-003-29 Aerospace
3 A-UK Interior finish. hardener : Curing - TR AIPS05-02- - -
AIMS04-04-040 IPS04-04-040-05 Coatings
Solution 6007 009
/ Netherland
Akzo Nobel
base : Aerodur 67273 Not VOC compliant
Aerospace
3 A-UK Interior finish. - - hardener : S26/22R - TR - - in accordance with A-UK
Coatings
thinner : C25/90S UK legislation
/ Netherland
Akzo Nobel base : Aerodur
AIMS04-04-003 IPS04-04-003-12 ABP4-2130
Aerospace HS67348
3 A-UK Interior finish. AIMS04-04-040 IPS04-04-040-11 - TR AIPS05-02- - -
Coatings catalyst : 99302
AIMS04-04-041 IPS04-04-041-05 009
/ Netherland hardener : 90150
ABP4-2130
PPG Aerospace / base : EC94
3 A-UK Interior finish. AIMS04-04-003 IPS04-04-003-02 - TR AIPS05-02- - - -
UK hardener : ACT194
009
ABP4-2130
PPG Aerospace / base : CA8351
3 A-UK Interior finish. AIMS04-04-003 IPS04-04-003-26 - TR AIPS05-02- - - -
UK hardener : CA8310B
009
AIMS04-04-003 IPS04-04-003-05 ABP4-2130
base : F70-A
3 A-UK Interior finish. AIMS04-04-040 IPS04-04-040-08 MAPAERO - TR AIPS05-02- - - -
hardener : F70-A
AIMS04-04-041 IPS04-04-041-08 009
base : FE106
PPG Aerospace /
3 A-UK Interior finish. - - hardener : N146 - TR ABP4-2130 - No longer available A-UK
UK
thinner : T109

base : 9170-D-6271 No longer available


hardener : 3000-7- 851-1365
3 A-UK Interior finish. - - PPG Aerospace - TR ABP4-2130 - A-UK
0161 withdrawn-no
thinner : 2000-6-0178 replacement.Code

base : F407-654 TR covers Primer +


PPG Aerospace / hardener : F210-746 Interior top
3 A-UK Interior finish. - - - TR ABP4-2130 - A-UK
UK thinner : F851-1365 for coat.FE122/627
low VOC or F851-808 dequalified

80-T-35-5030
AIMS04-04-003 IPS04-04-003-27 base : Seevenax 311-
ABP4-2130
3 A-UK Interior finish. AIMS04-04-040 IPS04-04-040-04 MANKIEWICZ 83 - TR - - -
AIPS05-02-
AIMS04-04-041 IPS04-04-041-07 hardener : 315-80
009

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 14
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

base : Seevenax 311- 80-T-35-5030


AIMS04-04-003 IPS04-04-003-28
03 ABP4-2130
3 A-UK Interior finish. AIMS04-04-040 IPS04-04-040-03 MANKIEWICZ - TR - - -
hardener : 315-00 AIPS05-02-
AIMS04-04-041 IPS04-04-041-06
thinner : water 009

PR205
base : PR205
activator : ACT205
PPG Aerospace,
3 A-UK Interior finish. AIMS04-04-003 IPS04-04-003-30 CA8311 - - - - - -
PRC-Desoto
base : CA8311
activator : CA8310B

Primer
base : 37035A
Akzo Nobel hardener : 92140
Aerospace thinner : 98064
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-01 - - - - - -
Coatings Top coat
/ Netherland base : C21/100
hardener : S26/22R
thinner : C25/90S
3 Primer

base : 37035A
Akzo Nobel
hardener : 92162
Aerospace
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-02 Top coat - - - - - -
Coatings
base : C21/100
/ Netherland
hardener : 90120

Primer
base : Seevenax 113-
22
hardener : Seevenax
135-20
thinner : Seevenax
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-06 MANKIEWICZ - - - - - -
900-75
Top coat
base : Alexit 406-22
hardener : Alexit 400-
00
thinner : Alexit 901-45

Primer
base : Seevenax 113-
82
hardener : Seevenax
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-07 MANKIEWICZ 135-80 - - - - - -
Top coat
base : Alexit 406-82
hardener : Alexit 405-
82

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 15
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Primer
base : 37086-702267
hardener : 92140-
Akzo Nobel 000000
Aerospace thinner : 98064-
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-09 - - - - - -
Coatings 000000
/ Netherland Top coat
base : C21/100
hardener : S26/22R
thinner : C25/90S
Primer
base : 37086-702267
Akzo Nobel hardener : 92162-
Aerospace 000000
3 A-D Interior finish. AIMS04-04-040 IPS04-04-040-10 - - - - - -
Coatings Top coat
/ Netherland base : 77205-054569
hardener : 90120-
000000
base : Aerodur finish
IPS04-04-003-03 Aerospace
Decorative AIMS04-04-003 C21/100 PQ10050-004-00 AIPS05-02-
4 A-F IPS04-04-041-03 Coatings / Nether- - - - -
interior paint. -04-041 hardener : S26/22R PQ10050-004-01 009
Akzo NobelAIMS04 land
thinner : C25/90S
base : PU66 ASNA3602
Decorative PPG Aerospace / AIPS05-02-
4 A-F AIMS04-04-003 IPS04-04-003-01 hardener : 0730/9000 - PQ10050-004-00 - - -
interior paint. France 009
thinner : 0491/9000 PQ10050-004-02
Stoved epoxied base : 1PZ985E
8 A-D WLB5.7060 - PPG Aerospace - 80-T-35-5010 80-T-35-5010 - - A-D
Mg parts. hardener : HZ985E1
Stoved sealing
9 A-UK varnish for Mg DTD5562 - CIBA-GEIGY F290-2034 - BAEP3507 BAEP3507 - - A-UK
parts.
Stoved primer for
steels of
R>145hb
applied after
INDESTRUCTI-
10 A-UK cadmium plating - - 700-155-003 - TH ABP4-2131 - - -
BLE PAINT
or
phosphating +
primer TN
A00710012.
Stoved primer for
steels of
R>145hb
applied after
INDESTRUCTI-
10 SON cadmium plating - - 700-153-003 - 310 (SO) PS 6.6110 - - SON
BLE PAINT
or
phosphating +
primer TN
A00710012.
Stoved primer for
Mg parts applied INDESTRUCTI-
11 A-UK - - 700-155-003 - BAEP3507 BAEP3507 - - A-UK
per 9 + primer BLE PAINT
TN A00710012.
Oven cured top
coat for steels of
R>145hb to be INDESTRUCTI-
12 A-UK - - 690-152-004 - TH ABP4-2131 - - -
applied on the BLE PAINT
primer
N°10.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 16
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Oven cured top
coat for steels of
R>145hb to be INDESTRUCTI-
12 SON - - 690-152-004 - 310 SO PS6.6110 - - SON
applied on the BLE PAINT
primer
N°10.
Oven cured top
coat for Mg parts
INDESTRUCTI-
13 A-UK to - - 690-150-001 - BAEP3507 BAEP3507 - - A-UK
BLE PAINT
be applied on the
primer N°11.
AIMS04-04-008 ASNA4260 base : 473-13
Fuel Vapour Aerospace PQ10050-026-00
26 A-F -04-051 IPS04-04-051-02 hardener : C31 - IPDA64-14 - - A-F
Barrier Paint. Coatings / USA PQ10050-026-01
TNA00710133 Akzo NobelAIMS04 thinner : TL29
AIMS04-04-008
Fuel Vapour - PQ10050-026-00
26 A-F AIMS04-04-051 Le Joint Français PR1196 - - - no ips A-F
Barrier Paint. IPS04-04-051-01 PQ10050-026-02
TNA00710133
Fuel Vapour AIMS04-04-008 -
26 A-E Le Joint Français PR1196 - Z-12.410 - - - A-E
Barrier Paint. AIMS04-04-051 IPS04-04-051-01
base : CV 121
Fuel Vapour PPG Aerospace / AIMS04-04-
26 A-E - - hardener : Act.34 - Z-12.413 - - A-E
Barrier Paint. UK 008
thinner : T74
Akzo Nobel base : 473-13
Fuel Vapour AIMS04-04-051 ASNA4260 PQ10050-026-00
26 A-F Aerospace hardener : C31 - IPDA64-14 - - -
Barrier Paint. TNA00710133 IPS04-04-051-02 PQ10050-026-01
Coatings / USA thinner : TL29

Fuel Vapour AIMS04-04-051 - PQ10050-026-00


26 A-F Le Joint Français PR1196 - - - - -
Barrier Paint. TNA00710133 IPS04-04-051-01 PQ10050-026-02

Fuel Vapour
26 A-E AIMS04-04-051 IPS04-04-051-01 Le Joint Français PR1196 - Z-12.410 - - - -
Barrier Paint.
base : CV 121
Fuel Vapour PPG Aerospace /
26 A-E TNA00710133 - hardener : Act.34 - Z-12.413 - - - A-E
Barrier Paint. UK
thinner : T74

base : CV 683-3-2
Fuel Vapour PPG Aerospace /
26 A-E AIMS04-04-052 IPS04-04-052-01 hardener : X-310A - Z-12.413 - - - -
Barrier Paint. UK
thinner : TL59

AIPS05-02-
AIMS04-04-001 IPS04-04-001-07 base : P60A ASNA5147
009
AIMS04-04-004 IPS04-04-004-03 hardener : P60A PQ10050-230-00
230 IPDA64-02
Water-based AIMS04-04-038 IPS04-04-038-07
A-F MAPAERO thinner : water - PQ10050-230-01 - - -
primer. AIMS04-04-042 IPS04-04-042-08
AIMS04-04-001 IPS04-04-001-25 Akzo Nobel base : Aerowave 2001
water based AIMS04-04-004 IPS04-04-004-18 Aerospace PQ10050-230-00 AIPS 05-02-
230 A-F hardener : Curing - - - -
primer AIMS04-04-038 IPS04-04-038-01 Coatings PQ10050-230-02 009
Solution 6005
AIMS04-04-042 IPS04-04-042-05 / Netherland

AIMS04-04-001 IPS04-04-001-25
base : Seevenax 313-
Water-based AIMS04-04-004 IPS04-04-004-16 PQ10050-230-00 AIPS05-02-
230 A-F MANKIEWICZ 81 - - - -
primer. AIMS04-04-038 IPS04-04-038-02 PQ10050-230-03 009
hardener : 315-80
AIMS04-04-042 IPS04-04-042-07

base : Seevenax 313-


AIMS04-04-001 IPS04-04-001-24
01
water based AIMS04-04-004 IPS04-04-004-17 PQ10050-230-00 AIPS05-02-
230 A-F MANKIEWICZ hardener : 315-00 - - - -
primer AIMS04-04-038 IPS04-04-038-06 PQ10050-230-04 009
thinner : 907-01
AIMS04-04-042 IPS04-04-042-06
(optional)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 17
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

AIMS04-04-003 IPS04-04-003-05 base : F70-A ASNA5148 AIPS05-02-


Water-based
240 A-F AIMS04-04-040 IPS04-04-040-08 MAPAERO hardener : F70-A - PQ10050-240-00 009 - - -
topcoat
AIMS04-04-041 IPS04-04-041-08 thinner : water PQ10050-240-01 IPDA64-02

Akzo Nobel
base : Aerowave 3003
Water-based AIMS04-04-003 IPS04-04-003-29 Aerospace PQ10050-240-00 AIPS05-02-
240 A-D hardener : Curing - - - -
topcoat AIMS04-04-040 IPS04-04-040-05 Coatings PQ10050-240-02 009
Solution 6007
/ Netherland

AIMS04-04-003 IPS04-04-003-27 base : Seevenax 311- ABP4-2130


Water-based PQ10050-240-00
240 A-F AIMS04-04-040 IPS04-04-040-04 MANKIEWICZ 83 - AIPS05-02- - - -
topcoat PQ10050-240-03
AIMS04-04-041 IPS04-04-041-07 hardener : 315-80 009

AIMS04-04-003 IPS04-04-003-28 base : Seevenax 311- 80-T-35-5030


Water-based PQ10050-240-00
240 A-F AIMS04-04-040 IPS04-04-040-03 MANKIEWICZ 03 - AIPS05-02- - - -
topcoat PQ10050-240-04
AIMS04-04-041 IPS04-04-041-06 hardener : 315-00 009
Bonding primer
255 SON for leading - - CYTEC BR127 - 303 SO PS6.6004 - - -
edges.
Bonding primer
255 A-F for leading - - CYTEC BR127 - - TH6.7316 - - -
edges.
Bonding primer
255 A-UK for leading - - CYTEC BR127 - ABP4-1121 ABP4-1121 - - -
edges.
Bonding primer
255 A-E for leading - - CYTEC BR127 - Z-15.915 - - - -
edges.
Powder coating base : Rilsan ES Blanc
534 A-D AIMS04-04-044 IPS04-04-044-01 ARKEMA / France - - - - - -
for metallic 840 MAC

Anti-Slip Paint
base : Alexit Decklack
Antislip paint for 406-25
535 A-D internal structural AIMS04-04-049 IPS04-04-049-01 MANKIEWICZ hardener : Alexit - - - - - -
application Härter400
thinner : Alexit Ver-
dünner 901-45

base : 313 50 11KX 7


Non corrosion
000
536 A-D inhibiting glossy AIMS04-04-050 IPS04-04-050-01 MANKIEWICZ - - - - - -
hardener : 315 85
primer
0000 0 000
2 – PAINTS FOR STRUCTURAL COMPOSITS

Epoxy top coat


for laminates
interior
16 A-UK use to be applied - - PPG Aerospace F431-2034 - - BAEP3505 - - A-UK
on the primer
N°1.
(white colour)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 18
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Antistatic coat.
(general applica-
Akzo Nobel Pyroflex 7D713
tion General application
AIMS04-04-005 ASNA4241 Aerospace base : 7D713 PQ10050-017-00
17 A-F except for - IPDA64-05 - except for radome -
TNA00710106 IPS04-04-005-01 Coatings hardener : 0651 PQ10050-017-01
radome and and antenne fairing
/ France thinner : 0651
antenne
fairing)
Antistatic coat.
(general applica-
PU filler 5014 Type
tion General application
AIMS04-04-005 ASNA4250 PPG Aerospace / base : 5421/2921 PQ10050-017-00
17 A-F except for - IPDA64-05 - except for radome -
TNA00710106 IPS04-04-005-04 France hardener : 0707/9000 PQ10050-017-02
radome and and antenne fairing
thinner : 0491/9000I
antenne
fairing)
Antistatic coat.
(general applica-
Akzo Nobel Pyroflex 7D713
tion
Aerospace base : 7D713
17 A-UK except for - ASNA4241 - RJ ABP4-2125 - - A-UK
Coatings hardener : 0651
radome and
/ France thinner : 0651
antenne
fairing)
Antistatic coat.
(general applica- base :
tion PPG Aerospace / N59111/MB37601N
17 A-UK TNA00710106 - - RJ ABP4-2125 - - -
except for UK hardener : N39/1327
radome and thinner : N39/3460
antenne fairing)
Antistatic coat.
(general applica-
Akzo Nobel Pyroflex 7D713
tion
AIMS04-04-005 ASNA4241 Aerospace base : 7D713
17 A-E except for - Z-12.506 I+D-P-337 - - -
TNA00710106 IPS04-04-005-01 Coatings hardener : 0651
radome and
/ France thinner : 0651
antenne
fairing)
Antistatic coat.
(general applica-
base :
tion
PPG Aerospace / N59111/MB37601N
17 A-E except for TNA00710106 - - Z-12.506 I+D-P-337 - - -
UK hardener : N39/1327
radome and
thinner : N39/3460
antenne
fairing)
Antistatic coat.
(general applica-
Akzo Nobel Pyroflex 7D713
tion
AIMS04-04-005 ASNA4241 Aerospace base : 7D713
17 A-F except for - PQ10050-017-00 TH6.7347 - - -
TNA00710106 IPS04-04-005-01 Coatings hardener : 0651
radome and
/ France thinner : 0651
antenne
fairing)

Antistatic coat.
(general applica-
Akzo Nobel Pyroflex 7D713
tion
Aerospace base : 7D713 Replaced by 317
17 SON except for - - - 306 SO PS6.6103 - -
Coatings hardener : 0651 SO
radome and
/ France thinner : 0651
antenne
fairing)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 19
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Antistatic coat.
(general applica-
PU filler 5014 Type
tion
- - PPG Aerospace / base : 5421/2921
17 SON except for - 317 SO PS6.6122.01 - - -
AIMS04-04-005 IPS04-04-005-04 France hardener : 0707/9000
radome and
thinner : 0491/9000I
antenne
fairing)
Antistatic coat.
(general applica-
tion base : N59111
17 A-D except for TNA00710106 - PPG Aerospace hardener : N39/1327 - TNA00710003MT1 14 80-T-35-5256 - - -
radome and thinner : N39/3460
antenne
fairing)
Antistatic coat.
(general applica- Pyroflex 7D713
Akzo Nobel
tion base : 7D713
AIMS04-04-005 - Aerospace
17 A-D except for hardener : 0651 - - 80-T-35-5256 - - -
TNA00710106 IPS04-04-005-01 Coatings
radome and thinner : 0651/2
/ Netherland
antenne C25/90
fairing)
Antistatic coat.
(general applica-
Akzo Nobel Pyroflex 7D713
tion
AIMS04-04-005 - Aerospace base : 7D713
17 A-UK except for - RJ ABP4-2125 - - -
TNA00710106 IPS04-04-005-01 Coatings hardener : 0651
radome and
/ France thinner : 0651
antenne
fairing)
Antistatic coat.
(general applica-
tion base : N59/502
PPG Aerospace / PQ10050-018-00
18 A-F except for TNA00710106 - hardener : N39/1327 - - - - A-F
UK PQ10050-018-01
radome and thinner : N39/3460
antenne
fairing)
0986 Anti static
Antistatic coat.
coating
(special applica-
PPG Aerospace / base + hardener (kit) : PQ10050-018-00
18 A-F tion TNA00710106 ASNA4256 - IPDA 64-05 - - -
France 0986/2620 or PQ10050-018-02
radome antenna
5420/2620
fairing)
thinner : 0491/9000
Antistatic coat.
(general applica-
Alexit
tion
AIMS04-04-005 - base : 472-41
18 A-D except for MANKIEWICZ - TNA00710003MT1 15 80-T-35-5256 - - -
TNA00710106 IPS04-04-005-02 hardener : 400
radome and
thinner : 901-45
antenne
fairing)

Antistatic coat.
(general applica-
Anti static coating
tion
AIMS04-04-005 - base : 5420/2620
18 A-D except for PPG Aerospace - TNA00710003MT1 12 80-T-35-5256 - - -
TNA00710106 IPS04-04-005-03 hardener : 0707/9000
radome and
thinner : 0491/9000
antenne
fairing)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 20
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Antistatic coat.
(general applica-
base : N59/502
tion
MB38985
18 A-D except for TNA00710106 - PPG Aerospace - TNA00710003MT1 15 80-T-35-5256 - No longer available A-D
hardener : N39/1327
radome and
thinner : N39/3460
antenne
fairing)
Antistatic coat.
(general applica-
tion base : 59660
18 A-D except for TNA00710106 - PPG Aerospace hardener : N39/1327 - - 80-T-35-5256 - No longer available A-D
radome and thinner : N39/3460
antenne
fairing)
Antistatic coat.
(general applica-
Anti static coating
tion
base : 5420/2620
18 A-E except for TNA00710106 - PPG Aerospace - TNA00710003MT1 12 I+D-P-337 - Z-12556 -
hardener : 0707/9000
radome and
thinner : 0491/9000
antenne
fairing)
Wash primer
base : P99
hardener : 841
Exterior paint
thinner : 434
scheme with :
Primer
wash
PPG Aerospace / base : Pac 33 harden- PQ10050-021-00 AIPS05-02-
21 A-F primer, primer, AIMS04-04-012 IPS04-04-012-04 - - - -
France er : 701 PQ10050-021-01 003
flexible polyure-
thinner : 433
thane
Top coat
top coat.
base : PU66
hardener : 730
thinner : 491

Exterior paint
scheme with :
Akzo Nobel
wash
Aerospace PQ10050-021-00
21 A-F primer, primer, TNA00710113 - A166 + S15/90 + HF - - - - A-F
Coatings PQ10050-021-02
flexible polyure-
/ Netherland
thane
top coat.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 21
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

Wash primer Metaflex


FCR
base : Metaflex FCR
primer
hardener : Metaflex
Exterior paint
FCR hardener
scheme with :
Akzo Nob el thinner : 98056
wash AIPS05-02-
Aerospace Primer S15/90/37214 PQ10050-021-00
21 A-F primer, primer, AIMS04-04-012 IPS04-04-012-01 - 003 - - -
Coatings base : Aerodur S15/90 PQ10050-021-04
flexible polyure- IPDA 64-03
/ Netherland hardener : S66/14
thane
thinner : N98064
top coat.
Top coat HF 77264
base : Aerodue finish
HF77264
hardener : S66/22R
thinner : C25/90S

Exterior paint
scheme with :
wash
primer, primer,
flexible polyure- PPG Aerospace / PP 609 + PR 123 + FE PQ10050-021-00
21 A-F TNA00710113 - - - - - A-F
thane UK 102 PQ10050-021-03
top coat.
Exterior paint
scheme with :
wash

primer, primer,
flexible polyure- PPG Aerospace / P 99 + Pac 33 + CA PQ10050-021-00
21 A-F TNA00710113 - - IPDA 64-03 - - A-F
thane France 40000 PQ10050-021-05
top coat.

T T represents
Exterior paint
ABP 4-1123 + ABP 42134.
scheme with : Akzo Nobel
TT no longer
wAI-Fh primer, Aerospace Metaflex WR + 37045
21 A-UK TNA00710113 - - TT ABP4-2134 - used. Not VOC A-UK
primer, flexible Coatings + HF Series
compliant in
polyurethane / Netherland
accordance with UK
top coat
legislation.

Exterior paint T T represents


scheme with : ABP 4-1123 + ABP 42134.
wash Akzo Nobel TT no longer
Metaflex FCR +
21 A-UK primer, primer, TNA00710113 - Aerospace - TT ABP4-2134 - used. Not VOC A-UK
S15/90 + HF Series
flexible polyure- Coatings compliant in
thane accordance with UK
top coat. legislation.

Exterior paint T T represents ABP


scheme with : 4-1123 + ABP 4-
wash 2134.TT no longer
PPG Aerospace / PP 609 + PR 123 + FE
21 A-UK primer, primer, TNA00710113 - - TT ABP4-2134 - used. Not VOC A-UK
UK 102
flexible polyure- compliant in
thane accordance with UK
top coat. legislation.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 22
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Exterior paint T T represents ABP
scheme with : 4-1123 + ABP 4-
wash 2134.TT no longer
P 99 + Pac 33 + CA
21 A-UK primer, primer, TNA00710113 - PPG Aerospace - TT ABP4-2134 - used. Not VOC A-UK
40000
flexible polyure- compliant in
thane accordance with UK
top coat. legislation.

Wash primer Metaflex


FCR
base : Metaflex FCR
primer
hardener : Metaflex
Exterior paint
FCR hardener
scheme with : T T represents ABP
thinner : 98056
wash 4-1123 + ABP 4
Primer S15/90/37214
21 A-UK primer, primer, - - PPG Aerospace - TT ABP4-2134 - 2134.TT no longer A-UK
base : Aerodur S15/90
flexible polyure- used. ompNot VOC in
hardener : S66/14
thane accordance with UK legislation.
thinner : N98064
top coat.
Top coat HF 77264
base : Aerodue finish
HF77264
hardener : S66/22R
thinner : C25/90S

Exterior paint
scheme with :
wash
9120-P-3011 + 9149-
21 A-UK primer, primer, - - PPG Aerospace - TT - - No longer available A-UK
P-3000 + 9151/0
flexible polyure-
Series
thane
top coat.

Exterior paint
scheme with :
wash
P 99 + PAC 33 +
21 A-D primer, primer, TNA00710113 - PPG Aerospace - - 80-T-35-9127 - - A-D
CA8000
flexible polyure-
thane
top coat.

Wash primer
base : P99
hardener : 841
Exterior paint
thinner : 434
scheme with :
Primer
wash
base : Pac 33
21 A-D primer, primer, AIMS04-04-012 IPS04-04-012-04 PPG Aerospace - - 80-T-35-9127 - - -
hardener : 701
flexible polyure-
thinner : 433
thane
Top coat
top coat.
base : PU66
hardener : 730
thinner : 491

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 23
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

Wash primer Metaflex


FCR
base : Metaflex FCR
primer
hardener : Metaflex
Exterior paint
FCR hardener
scheme with :
Akzo Nobel thinner : 98056 TNA00710003 M T1
wash
Aerospace Primer S15/90/37214 (18) + 80-T-35-9127 +
21 A-D primer, primer, AIMS04-04-012 IPS04-04-012-01 - 80-T-35-9127 - - -
Coatings base : Aerodur S15/90 TNA00710003 M T1
flexible polyure-
/ Netherland hardener : S66/14 (44)
thane
thinner : N98064
top coat.
Top coat HF 77264
base : Aerodue finish
HF77264
hardener : S66/22R
thinner : C25/90S

Exterior paint
scheme with :
Akzo Nobel
wash
Aerospace FCR A176 + S15/90 +
21 SON primer, primer, - - - 017 (SO) - - - SON
Coatings HF 407
flexible polyure-
/ Netherland
thane
top coat.
Exterior paint
scheme with :
Akzo Nobel
wash FCR A176 + S15/90 + PS 6.6002.01
Aerospace
21 SON primer, primer, AIMS04-04-012 - Aerodur Finish HF - 017 (SO) PS 6.6003.01 - - -
Coatings
flexible polyure- 77264 PS 6.6101.01
/ Netherland
thane
top coat.
Wash primer
base : P99
hardener : 841
Exterior paint
thinner : 434
scheme with :
Primer
wash PS 6.6002.01
PPG Aerospace / base : Pac 33
21 SON primer, primer, AIMS04-04-012 - - 061 (SO) PS 6.6003.01 - - -
France hardener : 701
flexible polyure- PS 6.6101.01
thinner : 433
thane
Top coat
top coat.
base : PU66
hardener : 730
thinner : 491
Exterior paint
scheme with :
Akzo Nobel
wash
Aerospace FCR + S15/90 + HF
21 F primer, primer, TNA00710113 - - PQ10050-021-00 TH6.7365 - - F
Coatings 407
flexible polyure-
/ Netherland
thane
top coat.
Exterior paint
scheme with :
Akzo Nobel
wash
Aerospace FCR + S15/90 + HF
21 F primer, primer, TNA00710113 - - PQ10050-021-00 TH6.7365 - - F
Coatings 77264
flexible polyure-
/ Netherland
thane
top coat.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 24
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Exterior paint
scheme with :
Akzo Nobel
wash
Aerospace FCR + S15/90 + HF
21 A-E primer, primer, AIMS04-04-012 IPS04-04-012-01 - Z-12.120 + Z-12.105 + Z-12.380 I+D-P-60 - HF 77264 no longer available A-E
Coatings 77264
flexible polyure-
/ Netherland
thane
top coat.
Exterior paint
scheme with :
Akzo Nobel
wash Metaflex FCR +
Aerospace
21 A-E primer, primer, AIMS04-04-012 IPS04-04-012-03 S15/90 + C21/100 - Z-12.120 + Z-12.105 + Z-12.380 I+D-P-60 - - -
Coatings
flexible polyure- UVR
/ Netherland
thane
top coat.
Exterior paint
scheme with :
wash
PPG Aerospace /
21 A-E primer, primer, AIMS04-04-012 IPS04-04-012-04 P 99 + Pac 33 + PU 66 - Z-12.120 + Z-12.105 + Z-12.380 I+D-P-60 - - -
France
flexible polyure-
thane
top coat.
Exterior paint
scheme:primer,st N 53631-T5-062
PPG Aerospace / PQ10050-025-00
24 A-F ripping interme- - - N 53652 - - - No longer available A-F
UK PQ10050-025-01
diate arrestor N 53624
coat,top coat.
Exterior paint
scheme:primer,st N 53631-T5-062
25 A-D ripping interme- - - PPG Aerospace N 53652 - - - - - A-D
diate arrestor N 53624
coat,top coat.
Exterior paint
scheme:primer,st
N 53631-T5-062 Replaced by Z-
ripping PPG Aerospace / Z-12.105 + Z-12.310 +
25 A-E - - N 53652 - - - 12.136+ Z-12.137+ A-E
intermediate UK Z-12.380
N 53624 Z-12.389
arrestor coat,top
coat.
Exterior paint
scheme:primer,st
N 53631-T5-062
ripping PPG Aerospace /
25 F - - N 53652 - PQ10050-025-00 TH 6.7365 - - F
intermediate UK
N 53624
arrestor coat,top
coat.
Exterior paint
scheme:primer,st
N 53631-T5-062
ripping PPG Aerospace /
25 A-UK - - N 53652 - - - - No longer available A-UK
intermediate UK
N 53624
arrestor coat,top
coat.
ISOMAP P23
Primer, Barrier Z-12.136 + Z-12.137 +
25 A-E TNA00710028 - MAPAERO MAPSTRIP S15 - - - Do not use. A-E
Coat, Top Coat Z-12.389
AEROMAP 1000
INTERGARD 90
Primer, Barrier PPG Aerospace / Z-12.136 + Z-12.137 +
25 A-E TNA00710028 - CA-30000 - - - Do not use. A-E
Coat, Top Coat France Z-12.389
CA-40000
Isomap P23 PS 6.6007.01
Primer, Barrier
25 SON - - MAPAERO Mapstrip S15 - 062 (SO) PS 6.6101.01 - - SON
Coat, Top Coat
Aeromap 1000 PS 6.6125.01

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 25
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Isomap P23 75-T-2-5720-
Primer, Barrier
25 A-D - - MAPAERO Mapstrip S15 - 062 (SO) 1-1 - - A-D
Coat, Top Coat
Aeromap 1000 80-T-35-9799
Decorative
polyurethane
base : Aerodur finish
exterior
Akzo Nobel C21/100 77233 (4/5 h)
paint to be ASNA3646 AIPS05-02- Not VOC compliant
Aerospace or
27 A-F applied on AIMS04-04-025 ASNA4240 - PQ10050-027-00 003 - To be replaced by A-F
Coatings 77240 (HF 8h)
polyurethane PQ10050-027-02 IPDA 64-03 PQ10050-425-00
/ Netherland hardener : S66/22R
top coat. (colours
thinner : C25/90S
according to
drawing)
base : Aerodur Gold
Akzo Nobel ASNA3669
Gold or silver RM or Silver RM
29 A-F TNA00710028 - Aerospace - PQ10050-029-00 IPDA 64-03 - - -
decorative paint. hardener : S66/22R
Coatings PQ10050-029-01
thinner : C25/90S
Akzo Nobel Aerodur non slip
ASNA5056
Antislip walkway ASN-B-70610 Aerospace base : 331125
34 A-F ASNA4299 - PQ10050-034-00 IPDA 64-05 - - A-F
paint (Internal) MIL-W-5044 Coatings hardener : S66/22R
PQ10050-034-01
/ Netherland thinner : C25/90S
base : N53621
Antislip walkway PPG Aerospace /
34 A-E - - hardener : N39/1327 - Z-12.512 I+D-P-60 - - A-E
paint (Internal) UK
thinner : N39/3259
Akzo Nobel
Aerodur non slip
Antislip walkway Aerospace
34 A-E - ASNA5299 hardener : S26/22R - Z-12.512 I+D-P-60 - - A-E
paint (Internal) Coatings
thinner : C25/90S
/ Netherland
base : N53621
Antislip walkway hardener : N39/1327 TN A00710003 M T1 thinner: F566-4200
34 A-D MIL.W.50 44B - PPG Aerospace - 80-T-35-5212 - A-D
paint (Internal) thinner : N39/3091 or (42) (5060/1344)
N39/3259
Alexit
Antislip walkway TNA00710012
34 A-D 75-T-2-5722-4-1 MANKIEWICZ base : 406-25 - - 80-T-35-5212 - - A-D
paint (Internal) TPF8010-0312
hardener : 400
base : AERODUR
AKZO NOBEL NON SLIP
Antislip walkway
34 A-UK - ASNA4299 AEROSPACE hardener : S66/22R - ABP 4-2361 ABP 4-2361 - - A-UK
paint (Internal)
COATINGS thinner : 98064 or
C25/90S
ALEXIT 406-25
Antislip walkway
34 A-UK - - MANKIEWICZ hardener : 400 - WZ ABP4-2361 - - -
paint (Internal)
thinner : 901-45
Akzo Nobel Aerodur non slip
ASNA5056
Antislip walkway A-A-59166 - Aerospace base : 331125
34 A-F - PQ10050-034-00 IPDA 64-05 - -
paint (Internal) ASN-B-70610 ASNA4299 Coatings hardener : S66/22R
PQ10050-034-01
/ Netherland thinner : C25/90S
Akzo Nobel
Aerodur non slip
Antislip walkway Aerospace
34 A-E - - hardener : S26/22R - Z-12.512 I D-P-60 - - -
paint (Internal) Coatings
thinner : C25/90S
/ Netherland
Alexit
Antislip walkway
34 A-D TPF8010-0312 75-T-2-5722-4-1 MANKIEWICZ base : 406-25 - - 80-T-35-5212 - - -
paint (Internal)
hardener : 400
base : AERODUR
Akzo Nobel NON SLIP
Antislip walkway
34 A-UK - - Aerospace hardener : S66/22R - WZ ABP 4-2361 - - -
paint (Internal)
Coatings thinner : 98064 or
C25/90S

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 26
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Anti fretting PPG Aerospace / LR8123
35 A-UK DTD900/4650 - - BAEP3513 BAEP3513 - - A-UK
primer. UK thinner : TH94
base : 5425/6407 ASNA5061
Paint for compo- PPG Aerospace /
38 A-F AIMS04-04-002 - hardener : 0707/9000 - PQ10050-038-00 IPDA64-05 - - A-F
site only. France
thinner : 0491/9000 PQ10050-038-01
base : FE566-
Paint for compo- TNA00710012 4200RAL1014
38 A-D - PPG Aerospace - TNA00710003MT1 3 80-T-35-5024 - Pas d IPS -
site only. Type2 hardener : N39/1327
thinner : N39/3460
base : GL11-1014
Paint for compo- TNA00710012
38 A-D - BASF-Lackchemie hardener : SC29-0113 - TNA00710003MT1 3 80-T-35-5024 - No longer available A-D
site only. Type2
thinner : SV46-0171
Aerodur barrier
Akzo Nobel
AIMS04-04-002 primer 37045 80-T-35-5024
Paint for compo- 75-T-2-5717-3-1 Aerospace
38 A-D TNA00710012 base : 37045 - TNA00710003MT1 3 AIPS05-02- - - -
site only. IPS04-04-002-01 Coatings
Type2 hardener : S26/22R 009
/ Netherland
thinner : C25/90S

Akzo Nobel
AIMS04-04-002 base : 37076 80-T-35-5025
Paint for compo- Aerospace
38 A-D TNA00710012 IPS04-04-002-05 hardener : 92133 - TNA00710003MT1 43 AIPS05-02- - - A-D
site only. Coatings
Type2 thinner : 98064 009
/ Netherland

Akzo Nobel
80-T-35-5025
Paint for compo- TNA00710012 Aerospace base : 37076
38 A-D IPS04-04-002-02 - TNA00710003MT2 43 AIPS05-02- - - A-D
site only. Type2 Coatings hardener : 92161
009
/ Netherland
Aerodur barrier
Akzo Nobel
primer 37045 AIPS05-02-
Paint for compo- Aerospace
38 A-E AIMS04-04-002 IPS04-04-002-01 base : 37045 - Z-12.129 009 - - -
site only. Coatings
hardener : S66/22R I+D-P-60
/ Netherland
thinner : C25/90S
base : 5425/0000
Paint for compo- PPG Aerospace hardener :
38 A-E AIMS04-04-002 - - Z-12.132 I+D-P-60 - - A-E
site only. /France 0707/9000thinner :
0491/9000
80-T-35-5035
Paint for compo- base : Alexit 343-81
38 A-D AIMS04-04-002 IPS04-04-002-04 MANKIEWICZ - TN10003MT2 AIPS05-02- - - -
site only. hardener : 345-35
009
80-T-35-5035
Paint for compo- base : Alexit 343-21
38 A-D AIMS04-04-002 IPS04-04-002-03 MANKIEWICZ - TN10003MT2 AIPS05-02- - - -
site only. hardener : 345-35
009
ABP4-1352
Paint for compo- base : Alexit 343-21 Chromate-free
38 A-UK AIMS04-04-002 IPS04-04-002-03 MANKIEWICZ - WZ AIPS05-02- - -
site only. hardener : 345-35 transport primer for A380
009
Akzo Nobel
Paint for compo- Aerospace base : 222P06 AIPS05-02-
38 A-D AIMS04-04-002 IPS04-04-002-09 - - - not to be used A-D
site only. Coatings hardener : X-804W 009
/ Netherland
Akzo Nobel
80-T-35-5035
Paint for compo- Aerospace base : 222P05
38 A-D AIMS04-04-002 IPS04-04-002-10 - - AIPS05-02- - not to be used A-D
site only. Coatings hardener : X-810W
009
/ Netherland
Akzo Nobel
80-T-35-5035
Paint for compo- Aerospace base : 222P02
38 A-D AIMS04-04-002 IPS04-04-002-11 - - AIPS05-02- - not to be used A-D
site only. Coatings / Nether- hardener : X-802W
009
land

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 27
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Akzo Nobel
AIMS04-04-002 IPS04-04-002-15 base : Aerowave 2002 80-T-35-5035
Paint for compo- Aerospace
38 A-D AIMS04-04-035 IPS04-04-035-01 hardener : Curing - - AIPS05-02- - - -
site only. Coatings
AIMS04-04-045 IPS04-04-045-01 Solution 6005 009
/ Netherland
Akzo Nobel
Paint for compo- AIMS04-04-002 IPS04-04-002-15 base : Aerowave 2002 ASNA5061
Aerospace AIPS05-02-
38 A-F site only.(water AIMS04-04-035 IPS04-04-035-01 hardener : Curing - PQ10050-038-00 - - -
Coatings 009
based) AIMS04-04-045 IPS04-04-045-01 Solution 6005 PQ10050-038-02
/ Netherland
Water based AIMS04-04-002 IPS04-04-002-13 Seevenax
PQ10050-038-00 AIPS 05-02-
38 A-F paint for compo- AIMS04-04-035 IPS04-04-035-03 MANKIEWICZ primer : 313-82 - - - -
PQ10050-038-03 009
site only. AIMS04-04-045 IPS04-04-045-03 hardener : 315-80
Seevenax
Water based AIMS04-04-002 IPS04-04-002-14
primer : 313-02 PQ10050-038-00 AIPS 05-02-
38 A-F paint for compo- AIMS04-04-035 IPS04-04-035-02 MANKIEWICZ - - - -
hardener : 315-00 PQ10050-038-04 009
site only. AIMS04-04-045 IPS04-04-045-02
Demineralized water
base : 5425/6407 ASNA5061
Paint for compo- PPG Aerospace /
38 A-F - - hardener : 0707/9000 - PQ10050-038-00 IPDA64-05 - - -
site only. France
thinner : 0491/9000 PQ10050-038-01
Akzo Nobel
base : 37076 80-T-35-5025
Paint for compo- Aerospace
38 A-D AIMS04-04-002 IPS04-04-002-05 hardener : 92133 - TNA00710003MT1 43 AIPS05-02- - - -
site only. Coatings
thinner : 98064 009
/ Netherland
Akzo Nobel
80-T-35-5025
Paint for compo- Aerospace base : 37076
38 A-D AIMS04-04-002 IPS04-04-002-02 - TNA00710003MT2 43 AIPS05-02- - - -
site only. Coatings hardener : 92161
009
/ Netherland
base : 5425/0000
Paint for compo- PPG Aerospace /
38 A-E - - hardener : 0707/9000 - Z-12.132 I D-P-60 - - -
site only. France
thinner : 0491/9000
Anti erosion and
N59.660/MD607
antistatic paint
base : N59.66
40 A-D for 4.653.97 - PPG Aerospace - 80-T-35-5256 80-T-35-5256 - No longer available A-D
hardener : N39/1327
laminates.
thinner : N39/3460
(leading edges)
Anti erosion and
base : N59.660
antistatic paint
PPG Aerospace / hardener : N39/1327
40 SON for - - - 311 SO PS6.6105.01 - No longer available SON
UK thinner : N39/3259 or
laminates.
N39/3460
(leading edges)
Anti erosion top N53.628
coat for lami- hardener : N59/1327
41 A-D 4.653.98 - PPG Aerospace - 2.668.28 2.668.28 - No longer available A-D
nates. thinner : N39/3259 or
(leading edges) N39/3460
Anti erosion top
N53.636
coat for lami-
41 A-D WLB5.7110 - PPG Aerospace hardener : N59/1327 - 80-T-35-5202 80-T-35-5202 - No longer available A-D
nates.
thinner : N39/3460
(leading edges)
Anti erosion paint base : Celoflex95
AIPS05-02-
41 A-D for laminates AIMS04-04-016 IPS04-04-016-01 PPG Aerospace hardener : 0778/9000 - 80-T-35-5202 - - -
009
(leading edges) thinner : 0470NV
Anti erosion paint base : Celoflex95 AIPS05-02-
41 A-E for laminates AIMS04-04-016 IPS04-04-016-01 PPG Aerospace hardener : 0778/9000 - Z-12.547 009 - - -
(leading edges) thinner : 0470NV I+D-P-313
Interflex 5470
Anti erosion paint
PPG Aerospace / base : 5470/0000 Replaced by 326
41 SON for laminates - - - 318 SO PS6.6123.01 - SON
France hardener : 0770/9000 SO
(leading edges)
thinner : 0470/9000

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 28
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Anti erosion top
coat for lami- PPG Aerospace /
41 A-E - N53636 + N53628 - Z-12.535 + Z-12.536 - - A-E
nates. UK
(leading edges)
Anti erosion top
base : Celoflex95
coat for lami-
41 A-UK AIMS04-04-016 IPS04-04-016-01 PPG Aerospace hardener : 0778/9000 - WZ ABP4-2133 - - -
nates.
thinner : 0470NV
(leading edges)
Porefiller.(structu PPG Aerospace / PQ10050-076-00 Replaced by
76 A-F AIMS04-04-011 ASNA4251 5425/0000 - - - A-F
ral) France PQ10050-076-01 PQ10050-127-00
Porefiller.(structu PPG Aerospace / base : Mastic 4848 B
76 A-E - - - Z-12.209 I+D-P-313 - - -
ral) France hardener : 6112/0000
PE-F 84
Porefiller.(structu PPG Aerospace / Replaced by Z-
76 A-E - - PF-H 7023-95-2 - Z-12.214 IPDA 64-05 - A-E
ral) Wiederhold 12.214
N39400
Porefiller.(structu Laminar
76 A-E - - Akzo Nobel - Z-12.216 - - - -
ral) X-500
Porefiller.(structu Epibond
76 A-E - - HUNTSMAN S.A. - Z-18.150 - - - -
ral) 150 A/B
Porefiller.(structu PPG Aerospace / base : 5425/0000
76 A-E AIMS04-04-011 - - Z-12.214 IPDA 64-05 - - A-E
ral) France hardener : 0707/9000
Appret 5014
Porefiller.(structu PPG Aerospace / base : 5425/0000
76 A-F AIMS04-04-011 ASNA4251 - Z-12.214 IPDA64-05 - - A-F
ral) France hardener : 0707/9000
thinner : 0491/9000
Akzo Nobel
Porefiller.(structu
76 SON - - Aerospace Polystop LP - 323 SO PS6.6006 - - -
ral)
Coatings
PU66
Porefiller.(structu PPG Aerospace / base : 5467/0000
76 SON - - - 324 SO PS6.6011 - - -
ral) France hardener : 0735/9000
thinner : 0491/9000
Porefiller.(structu PPG Aerospace / base : KS32A
76 A-UK AIMS04-04-011 - - ABP4-3135 ABP4-3135 - - A-UK
ral) UK hardener : KS32B
Porefiller.(structu PPG Aerospace / base : KS33
76 A-UK AIMS04-04-011 - - ABP4-3350 ABP4-3350 - - A-UK
ral) UK hardener : Act 209
Akzo Nobel
Replaced by
Porefiller.(structu Aerospace base : 467.9
76 A-UK - - - ABP 4-3350 ABP 4-3350 - Aerodur Brushing A-UK
ral) Coatings hardener : CA-41B
Filler
/ Netherland
Akzo Nobel Aerodur Brushing
Porefiller.(structu Aerospace Filler
76 A-UK - - - - ABP4-3350 - - -
ral) Coatings hardener : S66/14 or
/ Netherland S66/22R or S66/8
80-T-35-9030
Porefiller.(structu base : CA5414
76 A-D AIMS04-04-011 IPS04-04-011-01 PPG Aerospace - - AIPS05-02- - - A-D
ral) hardener : 5400B
009
Akzo Nobel
Aerowave proefiller 80-T-35-9030
Porefiller.(structu Aerospace
76 A-D AIMS04-04-011 IPS04-04-011-02 base : 222PF01 - - AIPS05-02- - - A-D
ral) Coatings
hardener : X-806W 009
/ Netherland
Porefiller.(structu base : CA5414 AIPS05-02- not listed in 80-T-
76 A-D AIMS04-04-011 IPS04-04-011-03 PPG Aerospace - - - A-D
ral) hardener : 5410B 009 35-???
base : Glassit Ziehspa-
Porefiller.(structu
76 A-D - - BASF-Lackchemie tel 839-51/1 - - 80-T-35-9030 - - -
ral)
hardener : 948-36

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 29
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Ferro-Fix Polyester-
Porefiller.(structu Voss chemie Spachtel
76 A-D - - - - 80-T-35-9030 - - -
ral) GmbH base : V513
hardener : ?
Araldite AW
Porefiller.(structu 106/HV953
76 A-D - - CIBA-GEIGY - - 80-T-35-9030 - - -
ral) base : A056
hardener : H025
Wiederhold UP
Spachtel
Porefiller.(structu
76 A-D - - Wiederhold GmbH base : W054 - - 80-T-35-9030 - - -
ral)
hardener : W089
thinner : l515
KS35 Knifing Stopper
Porefiller.(structu
76 A-D AIMS04-04-030 IPS04-04-030-01 PPG Aerospace base : KS35A - - 80-T-35-9030 - - -
ral)
hardener : KS35B
Porefiller.(structu base : Interplan 100SP
76 A-D - - Wiederhold GmbH - - 80-T-35-9030 - - -
ral) fine type B
Porefiller.(structu PPG Aerospace / base : F581-2022
76 A-UK AIMS04-04-011 - - ABP4-3350 ABP4-3350 - - A-UK
ral) UK hardener : F275-174
base : 5425/0000
Porefiller.(structu PPG Aerospace /
76 A-E - - hardener : 0707/9000 - Z-12.214 IPDA 64-05 - - -
ral) France
thinner : 0491/9000
Appret 5014
Porefiller.(structu PPG Aerospace / base : 5425/0000
76 A-F ASNA4251 - - PQ10050-076-00 IPDA64-05 - - -
ral) France hardener : 0707/9000
thinner : 0491/9000
Porefiller.(structu PPG Aerospace / base : KS32A
76 A-UK - - - - ABP4-3135 - - -
ral) UK hardener : KS32B
Porefiller.(structu PPG Aerospace / base : KS33
76 A-UK - - - - ABP4-3350 - - -
ral) UK hardener : Act 209
Porefiller.(structu
76 A-D AIMS04-04-011 IPS04-04-011-05 MANKIEWICZ - - - - - -
ral)
Porefiller.(structu
76 A-D AIMS04-04-030 IPS04-04-030-03 MANKIEWICZ - - - - - -
ral)
Porefiller.(structu
76 A-D - IPSDAN 1090-01 PPG Aerospace - - - - - -
ral)
Resealing
product for Porefiller PU66
important PPG Aerospace / base : 5467/0000 PQ10050-100-00
100 A-F AIMS04-04-011 - - IPDA64-05 - Pas d IPS A-F
defect of struc- France hardener : 0735/9000 PQ10050-100-01
tural laminated. thinner : 0491/9000
(exterior)
Resealing
product for
Porefiller PU 66
important PPG Aerospace /
100 A-E - - base : 5467/0000 - Z-12.211 - - - -
defect of struc- France
hardener : 0735/9000
tural laminated.
(exterior)
Resealing
product for Porefiller PU66
important PPG Aerospace / base : 5467/0000 PQ10050-100-00
100 A-F - - - IPDA64-05 - - -
defect of struc- France hardener : 0735/9000 PQ10050-100-01
tural laminated. thinner : 0491/9000
(exterior)
Replaced by
Anti erosion paint N 53631
PPG Aerospace / PQ10050-102-00 PQ10050-103-00
102 A-F scheme. (with - - N 59660 - - - A-F
UK PQ10050-102-01 and PQ10050-115
antistatic paint) N 53628
00

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 30
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Anti static coating
0986/2620 Replaced by
Anti erosion paint
PPG Aerospace / (5420/2620) PQ10050-103-00 PQ10050-103-00
103 A-F scheme. (with - - - IPDA 64-05 - A-F
France Anti-erosion paint PQ10050-103-01 and PQ10050-115
antistatic paint)
Interflex 5470/0000 00
Top coat PU66.5440
Anti erosion paint base : Celoflex 95
PPG Aerospace / PQ10050-103-00
103 A-F scheme. (with AIMS04-04-016 IPS04-04-016-01 hardener : 0778 - IPDA 64-05 - - -
France PQ10050-103-02
antistatic paint) thinner : 0470NV
Primer 5014
Anti static coating
Anti erosion paint 0986/2620 (5014
TN A00710003 M T2
103 A-D scheme. (with - - PPG Aerospace /2620) - 80-T-35-9040 - No longer available A-D
(661)
antistatic paint) Anti-erosion paint
Interflex 5470/0000
Top coat PU 66
Anti erosion paint base : Celoflex 95
TN A00710003 M T2
103 A-D scheme. (with AIMS04-04-016 IPS04-04-016-01 PPG Aerospace hardener : 0778 - 80-T-35-9040 - - -
(661)
antistatic paint) thinner : 0470NV
PQ10050-104-00
104 A-F Release agent. - - CIBA-GEIGY QZ5111 - IPDA64-09 - - -
PQ10050-104-04
PQ10050-104-00
104 A-F Release agent. - - CIBA-GEIGY QZ11B - IPDA64-09 - - A-F
PQ10050-104-02
PQ10050-104-00
104 A-F Release agent. - - FREEKOTE Freekote44 - - - - A-F
PQ10050-104-03
PQ10050-104-00
104 A-F Release agent. - - FREEKOTE Freekote33 - - - - A-F
PQ10050-104-01
104 SON Release agent. - - HOBILON Hobilon30 - - - - - SON
104 SON Release agent. - - SOCOMER NL2 - - - - - SON
MARBO ITALIA
104 A-D Release agent. - - TRE45ECO-45 - 80-T-34-9600 80-T-34-9600 - - -
SPA
Replaced by Z-
104 A-E Release agent. - - FREEKOTE Freekote33 - Z-24.221 - - A-E
24.224
104 A-E Release agent. - - FREEKOTE Freekote700NC - Z-24.224 - - - -
Anti erosion paint
PPG Aerospace / N 53631 PQ10050-107-00
107 A-F scheme. (with - - - - - - A-F
UK N 53628 PQ10050-107-01
antistatic paint)
Primer 5425/0000
Anti erosion paint
PPG Aerospace / Anti-erosion Interflex
107 A-E scheme. (with AIMS04-04-016 - - Z-12.214 + Z-12.541 + Z-12.380 I+D-P-313 - - A-E
France 5470/0000
antistatic paint)
Top coat PU 66
Anti erosion paint base : Celoflex 95
PPG Aerospace / Z-12.214 + Z-12.547 + J439 + Z-
107 A-E scheme. (with AIMS04-04-016 IPS04-04-016-01 hardener : 0778 - I+D-P-313 - - -
France 12.380
antistatic paint) thinner : 0470NV
Anti erosion paint Anti-erosion Interflex
PPG Aerospace / PQ10050-113-00
113 A-F scheme. (with - - 5470/0000 - IPDA 64-05 - - A-F
France PQ10050-113-01
antistatic paint) Top coat PU 66.5440
Anti erosion paint base : Celoflex 95
PPG Aerospace / PQ10050-113-00
113 A-F scheme. (with AIMS04-04-016 IPS04-04-016-01 hardener : 0778 - IPDA 64-05 - - -
France PQ10050-113-02
antistatic paint) thinner : 0470NV
Antistatic Type I 5014
Anti erosion paint
PPG Aerospace / Anti-erosion Interflex PQ10050-115-00
115 A-F scheme. (with - - - IPDA 64-05 - - A-F
France 5470 PQ10050-115-01
antistatic paint)
Top coat PU 66.5440
Anti erosion paint base : Celoflex 95
PPG Aerospace / PQ10050-115-01
115 A-F scheme. (with AIMS04-04-016 IPS04-04-016-01 hardener : 0778 - IPDA 64-05 - - -
France PQ10050-115-02
antistatic paint) thinner : 0470NV

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 31
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Antistatic Type I 5014
Anti erosion paint PS 6.6101.01
PPG Aerospace / Anti-erosion Interflex
115 SON scheme. (with - - - - PS 6.6122.01 - - SON
France PU
antistatic paint) PS 6.6123.01
Top coat PU 66
Anti erosion paint base : Celoflex 95 PS 6.6101.01
PPG Aerospace /
115 SON scheme. (with AIMS04-04-016 IPS04-04-016-01 hardener : 0778 - - PS 6.6122.01 - - SON
France
antistatic paint) thinner : 0470NV PS 6.6123.01
Appret 5014
Structural PPG Aerospace7 base : 5425/0000 PQ10050-127-00
127 A-F AIMS04-04-011 ASNA4251 - IPDA64-05 - Doublon en 76 A-F
porefiller. France hardener : 0707/9000 PQ10050-127-01
thinner : 0491/9000
Appret 5014
Structural PPG Aerospace / base : 5425/0000 PQ10050-127-00
127 A-F ASNA4251 - - IPDA64-05 - - -
porefiller. France hardener : 0707/9000 PQ10050-127-01
thinner : 0491/9000
Primer for PPG Aerospace / Koroflex primer
128 A-E TT-P-2760 - - Z-12.117 - - -
aramide parts. USA 823x439
Primer for Akzo Nobel
base : 37035A
external surfac- Aerospace PQ10050-220-00
220 A-F AIMS04-04-016 IPS04-04-001-02 hardener : 92140 - - - Touch-up only A-F
es. Touch Coatings PQ10050-220-01
thinner : 98064
up. / France
Primer for Akzo Nobel
base : 37035A
external surfac- Aerospace PQ10050-220-00
220 A-F AIMS04-04-001 IPS04-04-001-02 hardener : 92140 - - - Touch-up only -
es. Touch Coatings PQ10050-220-01
thinner : 98064
up. / France
Non-inhibiting
Akzo Nobel
primer + Top
Aerospace
537 A-D coat for AIMS04-04-045 IPS04-04-045-01 - - - - - -
Coatings
application on
/ Netherland
CFRP
Non-inhibiting
primer + Top
537 A-UK coat for AIMS04-04-045 IPS04-04-045-02 MANKIEWICZ - - - - - -
application on
CFRP
Non-inhibiting
primer + Top
537 A-UK coat for AIMS04-04-045 IPS04-04-045-03 MANKIEWICZ - - - - - -
application on
CFRP
Non-inhibiting
primer + Top
537 A-UK coat for AIMS04-04-046 IPS04-04-046-02 MANKIEWICZ - - - - - -
application on
CFRP
Non-inhibiting
primer + Top
537 A-UK coat for AIMS04-04-046 IPS04-04-046-03 MANKIEWICZ - - - - - -
application on
CFRP
3 - INTERNAL PAINTS FOR FURNISHING PARTS
Akzo Nobel No longer available. For furnishing
Finition NC4
Cockpit interior Aerospace PQ10050-033-00 parts use PQ10050-125 00 +
33 AS AIMS04-04-003 - base : NC4 - IPDA77-01 - A-F
paint. Coatings PQ10050-033-01 PQ10050-122 00 , for metal
thinner : CL11-1591
/ France PQ10050-122-00 only.
Protection for
ATOCHEM / PQ10050-056-00
56 A-F hand controls in - - Rilsan primaire Rilprim - IFTO-0355 - - -
Aquitaine Organico PQ10050-056-01
cokpit.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 32
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Primer for base : FL4300
BASF LACKE
70 A-D internal laminat- 4.653.89 - hardener : FL4206 - TNA00710003MT1 4 80-T-35-9123 - No longer available A-D
FARBEN AG
ed parts. thinner : FL4207
Primer for
BASF LACKE base : FL...
71 A-D internal laminat- 4.653.90 - - TNA00710003MT1 5 80-T-35-9123 - No longer available A-D
FARBEN AG thinner : FL7163
ed parts.
Primer for
internal ABS and BASF LACKE base : FL...
72 A-D 4.653.94 - - TNA00710003MT1 6 80-T-35-9123 - No longer available A-D
PVC FARBEN AG thinner : FL1902
parts.
base : FL...
Top Coat for BASF LACKE
73 A-D 4.653.91 - hardener : FL4206 - TNA00710003MT1 9 80-T-35-9123 - No longer available A-D
furnishing. FARBEN AG
thinner : FL7162
Decorative paint Alexit
for PC-FVW and base : 5018
74 A-D AI-GN1200 - MANKIEWICZ - TNA00710003MT1 7 80-T-35-9123 - No longer available A-D
metallic furnish- hardener : 402
ing part. thinner : 62
base : Vinylic varnish
Flocking for ASNA3599
PYROPLAST
75 A-F laminated parts. ASN-B77601 - UNITECO - PQ10050-075-00 - - - -
flocking fibers :
(furnishing) PQ10050-075-01
polyamides fibres UTO
base : Polyurethane
lacquer C21/100
Akzo Nobel
Flocking for flocking fibers : ASNA3599
Aerospace
75 A-F laminated parts. ASN-B77601 - Polyamide Fibres - PQ10050-075-00 - - - -
Coatings
(furnishing) DT.EX.6,7 35044 PQ10050-075-02
/ Netherland
(Poudres Indus. du
Nord)
Akzo Nobel
Porefiller for PQ10050-076-00 Furnishing parts
76 A-F - - Aerospace Appret polysurfacer - - - A-F
furnishing parts. PQ10050-076-03 only.
Coatings
Akzo Nobel
Porefiller for PQ10050-076-00 Furnishing parts
76 A-F - - Aerospace Polystop LP - IPDA64-08 - A-F
furnishing parts. PQ10050-076-02 only.
Coatings
Porefiller for PPG Aerospace / CELOFER PQ10050-076-00 Furnishing parts
76 A-F - - - IPDA64-08 - -
furnishing parts. France 9402/0155 PQ10050-076-04 only.
base : FINALIN
Porefiller for Kunsstoff-fuller 943
76 A-D 4.653.83 - MANKIEWICZ - TNA00710003MT1 21 80-T-35-9123 - - -
furnishing parts. hardener : Finalin 5
thinner : MEC acetone
base : N59300T508
Porefiller for white
76 A-D 4.663.83 - PPG Aerospace - TNA00710003MT1 21 80-T-35-9123 - no longer available -
furnishing parts. hardener : N32/1840
thinner : PV1
Porefiller for Wöralit + lachp
76 A-D - - WORWAG - - 80-T-35-5404 - No longer available A-D
furnishing parts. 52348F10.493
Luminescent
paint to be
77 A-D applied on a light WL5.7021 - BASF-Lackchemie LF92-2101 - TNA00710003MT1 16 80-T-35-5208 - No longer available A-D
coloured coat for
example white.
Luminescent
paint to be
77 A-D applied on a light WL5.7021 - PPG Aerospace N53550 - TNA00710003MT1 16 - - No longer available A-D
coloured coat for
example white.
Decorative paint Alexit
for thermoplastic base : 5018
120 A-D DAN1200 - MANKIEWICZ - TNA00710003MT1 7 80-T-35-9123 - no longer available A-D
and metallic hardener : 402
furnishing parts. thinner : 62

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 33
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Decorative paint Alexit
for thermoplastic base : 5018
120 A-E - - MANKIEWICZ - Z-12.381 - - no longer available A-E
and metallic hardener : 402
furnishing parts. thinner : 40262
Decorative paint
base : Alexit-FST filler
and filler for
DAN1200 414-11
121 A-D phenolic-glass - MANKIEWICZ - 80-T-35-9123 80-T-35-9123 - no longer available A-D
DAN1278 hardener : Alexit 459
laminates and
thinner : Alexit 62
sandwich.
Decorative paint
Alexit Strukturlack 421-
and filler for
DAN1200 18
121 A-D phenolic-glass - MANKIEWICZ - - - - No longer available A-D
DAN1278 hardener : Alexit402
laminates and
thinner : Alexit62
sandwich.
Decorative paint Alexit FST Fullgrund
ASNA3687
for thermoplastic 404-12
122 A-F ASN-B70400-SP - MANKIEWICZ - PQ10050-122-00 IPDA64-08 - For furnishing parts only. -
and metallic hardener : Alexit400
PQ10050-122-01
furnishing parts. thinner : Alexit62
Filler for thermo- Alexit FST Fullgrund
plastic and 414-12
122 A-D AIMS04-08-001 IPS04-08-001-02 MANKIEWICZ - TNA00710003MT1 7 80-T-35-9123 - - -
metallic hardener : Alexit400
furnishing parts. thinner : Alexit62
Alexit FST Strukturlack
Top coat for
404-12 base : Alex-
phenolic-glass
123 A-D AIMS04-08-002 IPS04-08-002-02 MANKIEWICZ it404-12 - TNA00710003MT1 7 80-T-35-9123 - - -
laminates and
hardener : Alexit402
sandwich.
thinner : Alexit62
Alexit FST Strukturlack
Top coat for
404-12 base : Alex-
phenolic-glass
123 A-E AIMS04-08-002 IPS04-08-002-02 MANKIEWICZ it404-12 - Z-12.381 - - - -
laminates and
hardener : Alexit400
sandwich.
thinner : Alexit62
Top coat for Alexit FST Fullgrund
phenolic-glass 414-12
123 A-E - - MANKIEWICZ - Z-12.381 - - - A-E
laminates and hardener : Alexit400
sandwich. thinner : Alexit62
Sealant Porefiller
PQ10050-126-00
123 A-F for furnishing - - MANKIEWICZ FINALIN N°2 - IPDA64-08 - - -
PQ10050-126-01
parts.
Drawing notes
Primer for PC PPG Aerospace / base : N59.522/508 Drawing notes as
124 A-UK - - - as - - A-UK
plastic parts. UK thinner : N37.552 required
required
Drawing notes
Primer for PC PPG Aerospace / base : F172.3102 Drawing notes as
124 A-UK - - - as - - A-UK
plastic parts. UK thinner : 850-5103 required
required
Alexit
Primer for base : 414-12 PQ10050-125-00
125 A-F AIMS04-08-001 IPS04-08-001-02 MANKIEWICZ - IPDA64-08 - - -
furnishing parts. hardener : 402 PQ10050-125-01
thinner : 62
Alexit
Water based top PQ10050-140-00
140 A-F - ASNA4178 MANKIEWICZ base : 346-65 - - - - -
coat. PQ10050-140-01
hardener : 345-65
Photolumines-
TENAXON PUL 1 PQ10050-210-00
210 A-F cent system - - MANKIEWICZ - - - For furnishing parts, handle. -
basis PQ10050-210-01
(primer).
Photolumines-
TENAXON PUL 2 PQ10050-211-00
211 A-F cent system (top - - MANKIEWICZ - - - For furnishing parts, handle. -
basis PQ10050-211-01
coat).

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 34
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
base : Alexit FST Top
Top coat for Coat 346-55
320 A-D AIMS04-08-002 IPS04-08-002-01 MANKIEWICZ - - 80-T-35-9123 - - -
furnishing parts hardener : Alexit 345-
55
base : Alexit FST Filler
Filler for furnish- 343-55
321 A-D AIMS04-08-001 IPS04-08-001-01 MANKIEWICZ - - 80-T-35-9123 - - -
ing parts hardener : Alexit 345-
15
base : Alexit FST Clear
Clear Coat for air Coat 404-15
322 A-D DAN1145-01 - MANKIEWICZ - - 80-T-35-9123 - - -
ducts hardener : Alexit 450
thinner : Alexit 62
base : Alexit FST Top
Clear Coat for air Coat 341-25
323 A-D DAN1145-02 - MANKIEWICZ - - 80-T-35-9123 - - -
ducts hardener : Alexit 345-
22
Effect coat for H+S - Effektlack
324 A-D DAN1139 - H+S -Chemie - - 80-T-35-9123 - - -
furnishing parts chronglanz
Autocryl Reflex RAL
Akzo Nobel 3024
Fluorescent paint Aerospace base : 77217/044115
538 A-UK AIMS04-04-056 IPS04-04-056-01 - - - - - -
system Coatings hardener :
/ Netherland 90030/000000
thinner : 98022/000000
4 - SPECIAL INTERNAL PAINTS
Photolumines-
PPG Aerospace / PQ10050-046-00 Replaced by
46 A-F cent system (top AIMS04-04-003 - 4125/2047 - IPDA77-01 - A-F
France PQ10050-046-01 PQ10050-053-00.
coat).
Flexible polyure- base : FE50/6HV
thane on lines of PPG Aerospace / hardener : ACT 34 PQ10050-053-00
53 A-F ASN-B70720 - - IPDA64-15 - IPDA77-01 removed -
bolt heads and/or UK thinner : TH115 or PQ10050-053-01
sealant fillets. TH127
Flexible polyure-
base : 4125/2047 gris
thane on lines of ASN-B70440 PPG Aerospace / PQ10050-053-00
53 A-F ASNA4285 hardener : 0613/9000 - IPDA64-15 - IPDA77-01 removed -
bolt heads and/or ASN-B70720 France PQ10050-053-02
thinner : 0580/9000
sealant fillets.
base : 4125/2047 or
Flexible polyure- 4125/5171 or
thane on lines of 4125/5271
53 A-D DAN1174 75-T-2-5721-3-1 PPG Aerospace - - 80-T-35-5218 - - -
bolt heads and/or or 4125/6407
sealant fillets. hardener : 0613/9000
thinner : 0580/9000
Flexible polyure- AIMS04-04-009
IPS04-04-009-01 IPS04- base : F69 AIPS05-02-
thane on lines of AIMS04-04-018 PQ10050-053-00
53 A-F 04-018-01 IPS04-04-043- MAPAERO hardener : F69 - 009 - IPDA77-01 removed -
bolt heads and/or AIMS04-04-043 PQ10050-053-03
01 IPS04-04-047-01 thinner : water IPDA64-15
sealant fillets. AIMS04-04-047
Flexible polyure- base : FE50/6HV
thane on lines of PPG Aerospace / hardener : ACT 34
53 A-E - - - Z-12.524 I+D-P-186 - - A-E
bolt heads and/or UK thinner : TH115 or
sealant fillets. TH127
Flexible polyure- base : FE54/6HV
thane on lines of PPG Aerospace / yellow
53 A-UK - - - ABP4-2128 ABP4-2128 - no longer available A-UK
bolt heads and/or UK hardener : ACT5
sealant fillets. thinner : T115/T707
Flexible polyure-
base : FE50/6HV grey
thane on lines of PPG Aerospace /
53 A-UK - - hardener : ACT34 - ABP4-2128 ABP4-2128 - only FE 54/6HV no longer avalable -
bolt heads and/or UK
thinner : T115/T707
sealant fillets.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 35
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Flexible polyure-
base : CV116 clear
thane on lines of PPG Aerospace /
53 A-UK - - hardener : ACT34 - ABP4-2128 ABP4-2128 - only FE 54/6HV no longer avalable -
bolt heads and/or UK
thinner : T115/T707
sealant fillets.
Flexible polyure-
base : CV117 blue
thane on lines of PPG Aerospace /
53 A-UK - - hardener : ACT34 - ABP4-2128 ABP4-2128 - Only FE 54/6 HV no longer available -
bolt heads and/or UK
thinner : T115/T707
sealant fillets.
Flexible polyure-
thane on lines of PPG Aerospace /
53 A-UK - - F407-629 grey - ABP4-2128 ABP4-2128 - No longer available A-UK
bolt heads and/or UK
sealant fillets.
base :
Flexible polyure-
Akzo Nobel 7D1586.3680907
thane on lines of
53 A-UK - - Aerospace hardener : - ABP4-2128 ABP4-2128 - No longer available A-UK
bolt heads and/or
Coatings 7D1586.3970319
sealant fillets.
thinner : 3108
Flexible polyure- base : FE50/6HV
thane on lines of PPG Aerospace / hardener : ACT 34
53 SON - - - - PS6.6104 - - SON
bolt heads and/or UK thinner : TH188 or
sealant fillets. TH203
Polyamide No longer available.
PQ10050-054-00
54 A-F varnish for - - NYCOTE LAB. Nycote7-11 red - - - Replaced by A-F
PQ10050-054-01
sealant fillets. PQ10050-053-00.
Polyamide Replaced by ref
54 A-D varnish for - - NYCOTE LAB. Nycote7-11 red - TNA00710003MT1 26 80-T-35-5218 - 53(4125) and ref 55 A-D
sealant fillets. (Nycote 88)
Polyamide
54 A-F varnish for - - NYCOTE LAB. Nycote7-11 red - PQ10050-054-00 TH6.6556 - - A-F
sealant fillets.
Polyamide
54 A-E varnish for I+D-N-200 - NYCOTE LAB. Nycote7-11 red - Z-12.402 I+D-P-186 - - A-E
sealant fillets.
Polyamide
54 SON varnish for - - NYCOTE LAB. Nycote 7-11 - - - - No longer available. SON
sealant fillets.
Akzo Nobel
Protective
Aerospace PQ10050-055-00
55 A-F varnish on - - 7D1586 (blue) - - - No longer available. -
Coatings PQ10050-055-01
bonding points.
/ France
Protective
PQ10050-055-00
55 A-F varnish on NSA 936.002 - NYCOTE LAB. Nycote 7-11 - - - No longer available. A-F
PQ10050-055-02
bonding points.
Protective
PQ10050-055-00
55 A-F varnish on - - PPG Aerospace 4125/6407 - - - - -
PQ10050-055-03
bonding points.
Protective o longer available
55 A-D varnish on 2.668.20 - NYCOTE LAB. Nycote 7-11 - TNA00710003MT1 27 80-T-35-5218 - and replaced by A-D
bonding points. Nycote 88.
Protective
55 A-D varnish on DAN1172-01 - NYCOTE LAB. Nycote 88 - TNA00710003MT1 26 80-T-35-5218 - -
bonding points.
Protective base : 4125/6407
80-T-35-5218
55 A-D varnish on DAN1174 75-T-2-5721-3-1 PPG Aerospace hardener : 0613/9000 - - - blue color only
80-T-40-3312
bonding points. thinner : 0580/9000
Protective
55 A-E varnish on I+D-N-200 - NYCOTE LAB. Nycote 7-11 - Z-12.402 - - - A-E
bonding points.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 36
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Protective base : F69 (blue)
AIMS04-04-009 IPS04-04-009-01 PQ10050-055-00 AIPS05-05-
55 A-F varnish on MAPAERO hardener : F69 - - - -
AIMS04-04-043 IPS04-04-043-01 PQ10050-055-04 003
bonding points. thinner : water
LACKFABRIK Lackfabrik Baeder PQ10050-182-00
182 A-F Marking lacquer. - - - - - - -
BAEDER GMBH GMBH 8 CO PQ10050-182-01
ORGANIC PQ10050-182-00
182 A-F Marking lacquer. - - TORQUE SEAL F 925 - - - - -
PRODUCTS CO. PQ10050-182-02
base : 5540/9460 PQ10050-182-00
182 A-F Marking lacquer. - - PPG Aerospace - - - - -
hardener : 0701/9000 PQ10050-182-03
182 A-E Marking lacquer. - - PPG Aerospace PU 66-5440 (red) - Z-12.380 I+D-P-377 - - -
Akzo Nobel
182 A-E Marking lacquer. - - Aerospace C21/100 (red) - Z-12.380 I+D-P-377 - - -
Coatings
182 A-D Marking lacquer. - - PPG Aerospace PU 66-5440 - - 80-T-34-3006 - - A-D
Not hydraulic fluid
LACKFABRIK Sicherungslack in
182 A-D Marking lacquer. - - - - 80-T-34-3006 - resistant without -
BAEDER GMBH Tuben
varnish
Akzo Nobel Not VOC compliant
182 A-UK Marking lacquer. - - Aerospace base : C21/100 - TN ABP4-2126 - in accordance with A-UK
Coatings UK legislation
base : FE93
182 A-UK Marking lacquer. - - PPG Aerospace - TN ABP4-2126 - - -
hardener : No93
Akzo Nobel base : HF77264
TT ABP4-2127 TT no longer used. Not VOC compli-
182 A-UK Marking lacquer. - - Aerospace hardener : S26/22R - - A-UK
TV ABP4-2134 ant in accordance with UK legislation
Coatings thinner : C25/90S
base : FE102 Not VOC compliant
TT ABP4-2127
182 A-UK Marking lacquer. - - PPG Aerospace hardener : 102 - - in accordance with A-UK
TV ABP4-2134
thinner : T115/T609 UK legislation
base : CA40000
Not VOC compliant
hardener : 0796/9000 TT ABP4-2127
182 A-UK Marking lacquer. - - PPG Aerospace - - in accordance with A-UK
thinner : 0576/9000 or TV ABP4-2134
UK legislation
0945/9000
base : FE85/M
182 A-UK Marking lacquer. - - PPG Aerospace hardener : ACT85 - TN ABP4-2126 - no longer available -
thinner : T115 or T609
base : CA8000/...
hardener : CA8000B ABP4-2127
182 A-UK Marking lacquer. - - PPG Aerospace - TV - - A-UK
thinner : CA8000C1 or ABP4-2134
CA8000C2
TT no longer used
Akzo Nobel base : Aviox Finish
ABP4-2127 ABP 4-2134
182 A-UK Marking lacquer. - - Aerospace 77708 - TV - -
ABP4-2134 withdrawn, replaced
Coatings hardener : 90100
by ABP 4-2127
Alexit
Red tinted version
base : 406-22 AIPS03-06-
182 A-D Marking lacquer. - - MANKIEWICZ - - - as defined in AIPS -
hardener : 400-00 008
03-06-008
thinner : 901-45
base : CA8000/...
hardener : CA8000B
182 A-UK Marking lacquer. - - PPG Aerospace - TN ABP4-2126 - - -
thinner : CA8000C1 or
CA8000C2
base : 825009
High temperature PQ10050-376-00 AIPS05-02-
376 A-F AIMS04-04-019 IPS04-04-019-01 PPG Aerospace hardener : 910175 - - - -
primer. PQ10050-376-01 009
thinner : 020-044

High temperature base : 529K002 PQ10050-377-00 AIPS 05-02-


377 A-F AIMS04-04-021 IPS04-04-021-01 PPG Aerospace - - - -
top coat. hardener : 910 K021 PQ10050-377-01 009

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 37
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Flashurethane
base : LBY003 part A
interior varnish PQ10050-441-00
441 A-F - - JIVAL hardener : LBY003 - - - - -
for radome PQ10050-441-01
part B
thinner : DL646
5 - EXTERNAL PAINTS
Akzo Nobel No longer available, to be replaced
Special heat Pyrosil 7G888
Aerospace PQ10050-007-00 by PQ 10050-376-00 and/ or PQ
7 A-F resistant silicone ASN-B70500 - Aluminium - IPDA64-02 - A-F
Coatings PQ10050-007-01 10050
paint. thinner : 7G800/7G888
/ France 377-00
Akzo Nobel
Special heat Pyrosil 7G888
Aerospace
7 A-E resistant silicone - - Aluminium - Z-12.504 I+D-P-60 - - A-E
Coatings
paint. thinner : 7G800/7G888
/ France
Akzo Nobel
Heat resistant
Aerospace base : S15/37 PQ10050-014-00
14 A-F paint for touch - - - - - no longer available A-F
Coatings hardener : C3/24 PQ10050-014-01
up.
/ Netherland

Coating polyam- Plasting Coating


15 A-UK - - Plasting Coating L.T.D - ABP1-4047 ABP1-4047 - Replaced by XC A-UK
ide fluidized bed. L.T.D

Coating polyam-
15 A-UK - - Henkel Rilsan T - XC ABP1-4047 - - -
ide fluidized bed.
No longer available,
Coating polyam- Plasting Coating will be replaced by
15 A-D - - Plasting Coating L.T.D - 80-T-35-5601 80-T-35-5601 - -
ide fluidized bed. L.T.D an alternative
producer
External top coat
Akzo Nobel
polyurethane base : 7D1586
Aerospace PQ10050-020-00
20 A-F grey - - hardener : 7D1586 - - - - A-F
Coatings PQ10050-020-04
colour N° Bac thinner : 3108
/ France
707.
External top coat Akzo Nobel
base : 7D1586
polyurethane Aerospace PQ10050-020-00
20 A-F - - hardener : 7D1586 - - - - A-F
white colour Coatings PQ10050-020-05
thinner : 3108
N°9102 BS2660. / France
External top coat
polyurethane
PPG Aerospace / PQ10050-020-00
20 A-F grey - - Serie F407-708 - - - - A-F
UK PQ10050-020-01
colour N° Bac
707.
External top coat
polyurethane PPG Aerospace / PQ10050-020-00
20 A-F - - Serie F407-701 - - - - A-F
white colour UK PQ10050-020-02
N°9102 BS2660.
External top coat
polyurethane PPG Aerospace / PQ10050-020-00
20 A-F - - Serie F407-702 - - - - A-F
black UK PQ10050-020-03
colour.

External top coat PPG Aerospace /


20 A-F - - Serie F407-708 - PQ10050-020-00 TH6.7361 - - A-F
polyurethane. UK

Akzo Nobel N°Y1407


External top coat Aerospace base : 7D1586 Replaced by Z-
20 A-F Z-12.322 - - Z-12.322 I+D-P-60 - A-E
polyurethane . Coatings hardener : 7D1586 12.380 .
/ France thinner : 3108

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 38
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
P99
base : P99
Exterior paint hardener : 841
scheme with : thinner : 434
wash Pac33
AIPS05-02-
21 - primer, primer, AIMS04-04-012 IPS04-04-012-02 PRC DE SOTO base : Pac 33 harden- - - - - -
003
flexible polyure- er : 701
thane thinner : 433 CA40000
top coat. base : CA40000
hardener : 796
thinner : 564
Wash primer Metaflex
FCR
base : Metaflex FCR
primer
hardener : Metaflex
Exterior paint FCR hardener
scheme with : thinner : 98056
wash Akzo Nobel Aerodur primer
AIPS05-02-
21 - primer, primer, AIMS04-04-012 IPS04-04-012-03 Aerospace S15/90-37214 - - - - -
003
flexible polyure- Coatings base : S15/90-37214
thane hardener : S66/14
top coat. thinner : N98064
Aerodur finish
C21/100 UVR
base : C21/100 UVR
hardener : S66/22R
thinner : C25/90S
base : CA 8000
Exterior paint
scheme with : hardener : CA 8000B
wash thinner : CA 8000C
(top coat 10/12h) or AIPS05-02-
21 - primer, primer, AIMS04-04-012 IPS04-04-012-05 PPG Coatings SA - - - - -
CA8000C1 (top coat 003
flexible polyure-
thane 6/8h) or CA 8000C2
top coat. (top
coat 3/4h)
AIMS04-04-012 PU66 ASNA3626 AIPS05-02-
Not VOC compliant
Flexible exterior ASN-B70451 ASNA4247 PPG Aerospace/ base : 5440 PQ10050-022-00 003
22 A-F - - To be replaced by A-F
top coat. TNA00710113 IPS04-04-012-04 France hardener : 0730/9000 PQ10050-022-01 IPDA64-03
PQ10050-410-00
thinner : 0491/9000
PU66 PQ10050-022-00 AIPS05-02-
base : 5447 summer PQ10050-022-05 003 Not VOC compliant.
Flexible exterior PPG Aerospace/
22 A-F AIMS04-04-012 IPS04-04-012-04 version - IPDA64-03 - To be replaced by A-F
top coat. France
hardener : 07/30/9000 PQ10050-410-00
thinner : 0491/9000
AIMS04-04-012 IPS04-04-012-01 Akzo Nobel AIPS05-02-
base : HF77264 ASNA3626 Not VOC compliant.
Flexible exterior TNA00710028 Aerospace 003
22 A-F hardener : S26/22R - PQ10050-022-00 - To be replaced by A-F
top coat. Coatings IPDA64-03
thinner : C25/90S PQ10050-022-06 PQ10050-410-00
/ Netherland
base : FE102 PQ10050-022-00
Flexible exterior PPG Aerospace
22 A-F TNA00710113 - hardener : 102 - PQ10050-022-04 - - - A-F
top coat. /UK
thinner : T115
Akzo Nobel
Flexible exterior Aerospace PQ10050-022-00
22 A-F TNA00710113 - HF - - - - A-F
top coat. Coatings PQ10050-022-02
/ Netherland
base : 09123 PQ10050-022-00
Flexible exterior
22 A-F TNA00710113 - PPG Aerospace hardener : 07867 - PQ10050-022-03 - - no longer available A-F
top coat.
thinner : 09124

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 39
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
base : F427-2900 TT ABP4-2127
Flexible exterior PPG Aerospace /
22 A-UK - - hardener : F210-731 - TV ABP4-2134 - no longer available A-UK
top coat. UK
thinner : 851-808
base : 9151 TT ABP4-2127
Flexible exterior hardener : 2000-2- TV ABP4-2134
22 A-UK - - PPG Aerospace - - no longer available A-UK
top coat. 0240
thinner : 2000-6-0178
Akzo Nobel TT ABP4-2127
base : HF77264 TT no longer used.
Flexible exterior Aerospace TV ABP4-2134
22 A-UK - - hardener : S66/22R - - Not VOC compliant in accordance A-UK
top coat. Coatings
thinner : C25/90S with UK legislation.
/ Netherland
base : CA40000 TT no longer used.
Flexible exterior PPG Aerospace TT ABP4-2127
22 A-UK - - hardener : 0796/9000 - - Not VOC compliant A-UK
top coat. /UK TV ABP4-2134
hardener : 0576/9000 in accordance with UK legislation.
base : CA40000 TT no longer used. Not VOC compli-
Flexible exterior TT ABP4-2127
22 A-UK - - PPG Aerospace hardener : 0796/9000 - - ant in accordance with UK legisla- A-UK
top coat. TV ABP4-2134
thinner : 0495/9000 tion.
T V represents ABP
4-1123 + ABP 4
base : CA8000 2127.TT no longer
Flexible exterior ABP4-2127
22 A-UK - - PPG Aerospace hardener : CA8000B - TV - used. Not VOC A-UK
top coat. ABP4-2134
thinner : CA8000C1 compliant in
accordance with UK
legislation.
T V represents ABP
4-1123 + ABP 4
base : CA8000 2127.TT no longer
Flexible exterior ABP4-2127
22 A-UK - - PPG Aerospace hardener : CA8000B - TV - used. Not VOC -
top coat. ABP4-2134
thinner : CA8000C2 compliant in
accordance with UK
legislation.
base : FE102 TT no longer used. Not VOC compli-
Flexible exterior TT ABP4-2127
22 A-UK - - PPG Aerospace hardener : 102 - - ant in accordance with UK legisla- A-UK
top coat. TV ABP4-2134
thinner : T115 or T609 tion.
Akzo Nobel
Flexible exterior Aerospace base : Aviox 77708
22 A-UK - - - TV ABP4-2127 - no longer available -
top coat. Coatings hardener : 90100
/ Netherland
base : FE93
Flexible exterior
22 A-UK - - PPG Aerospace hardener : No.93 - TN ABP4-2126 - -
top coat.
thinner : T109
Akzo Nobel base : Aerodur finish
Flexible exterior Aerospace HF407
22 A-F TNA00710118 - - PQ10050-022-00 TH6.7365 - - A-F
top coat. Coatings hardener : S66/8RE
/ Netherland thinner : C25/90S
Akzo Nobel base : HF77264
Flexible exterior Aerospace hardener : S66/22R
22 A-F TNA00710118 - - PQ10050-022-00 TH6.7365 - - -
top coat. Coatings thinner : 96184 or
/ Netherland C25/90S
PU66
base : 5440 or 5447
Flexible exterior PPG Aerospace /
22 A-E AIMS04-04-012 IPS04-04-012-04 summer version - Z-12.380 I+D-P-60 - - -
top coat. France
hardener : 0730/9000
thinner : 0491/9000
Akzo Nobel base : Aerodur finish
Flexible exterior Aerospace HF77264 Product no longer
22 A-E AIMS04-04-012 - - Z-12.380 I+D-P-60 - A-E
top coat. Coatings hardener : S66/22R available
/ Netherland thinner : C25/90S

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 40
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Akzo Nobel base : Aerodur finish
Flexible exterior Aerospace HF407
22 SON - - - 304 SO PS6.6101 - - SON
top coat. Coatings hardener : S66/8RE
/ Netherland thinner : C25/90S
Akzo Nobel base : Aerodur finish
Flexible exterior Aerospace HF77264
22 SON - - - 304 SO PS6.6101.01 - - -
top coat. Coatings hardener : S66/22R
/ Netherland thinner : C25/90S
PU66
Flexible exterior PPG Aerospace / base : 5440 or 5447
22 SON - - - 319 SO PS6.6101.01 - - -
top coat. France hardener : 0730/9000
thinner : 0491/9000
base : CA8000
Flexible exterior
22 A-UK AIMS04-04-013 IPS04-04-013-02 PPG Aerospace hardener : CA8000B - TV ABP4-2127 - - -
top coat.
thinner : CA8000C1
base : CA8000
Flexible exterior
22 A-UK AIMS04-04-013 IPS04-04-013-02 PPG Aerospace hardener : CA8000B - TV ABP4-2127 - - -
top coat.
thinner : CA8000C2
For upper surface of
Exterior top coat
the wing and
on the upper Akzo Nobel Aeroflex finish G
ASNA3679 AIPS05-02- horizontal stabilizer
surface of the - ASNA4287 Aerospace 12.E.25
23 A-F - PQ10050-023-00 003 - only.Not VOC A-F
wing and AIMS04-04-017 IPS04-04-017-01 Coatings base : G12 E25
PQ10050-023-01 IPDA64-03 compliant.To be
horizontal / Netherland thinner : C25/90S
replaced by
stabilizer.
PQ10050-420-00
Exterior top coat
on the upper Akzo Nobel
surface of the Aerospace Aeroflex finish G PQ10050-023-00
23 A-F TNA00710129 - - IPDA64-03 - No longer available A-F
wing and Coatings 12.E.62208 PQ10050-023-02
horizontal / Netherland
stabilizer.
Exterior top coat
on the upper
surface of the PQ10050-023-00
23 A-F TNA00710129 - 3M Corogard EC 843S - - - No longer available A-F
wing and PQ10050-023-03
horizontal
stabilizer.
For upper surface of
Exterior top coat
the wing and
on the upper
horizontal stabilizer
surface of the PPG Aerospace / base : FE107 PQ10050-023-00
23 A-F TNA00710129 - - IPDA64-03 - only.Not VOC A-F
wing and UK hardener : T17 PQ10050-023-04
compliant.To be
horizontal
replaced by
stabilizer.
PQ10050-420-00
Exterior top coat
on the upper Akzo Nobel Not VOC
surface of the Aerospace Aeroflex finish S 15/69- ASNA5129 compliant.To be
23 A-F TNA00710129 - - IPDA 64-03 - A-F
wing and Coatings xxxx PQ10050-023-00 replaced by
horizontal / Netherland PQ10050-420-00
stabilizer.

ASNA4173 base : Metaflex FCR


Aerospace ASNA5143 AIPS05-02-
- IPS04-04-012-01 hardener : Metaflex
24 A-F Wash primer. Coatings - PQ10050-024-00 003 - - -
AIMS04-04-012 -04-012-03 FCR
/ Netherland PQ10050-024-02 IPDA64-03
Akzo NobelIPS04 thinner : 98056
IPS04-04-012-06
IPS04-04-012-02 P99
ASNA5143 AIPS05-02-
IPS04-04-012-04 PPG Aerospace / base : 7641/3600
24 A-F Wash primer. AIMS04-04-012 - PQ10050-024-00 003 - - -
IPS04-04-012-05 France hardener : 0841/9000
PQ10050-024-01 IPDA64-03
thinner : 0434/9000

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 41
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
base : PP609
PPG Aerospace PQ10050-024-00
24 A-F Wash primer. ASN-B70431 - hardener : CTH609 - - - - A-F
/UK PQ10050-024-03
thinner : T105
Akzo Nobel
base : Metaflex FCR
Aerospace
24 A-F Wash primer. - - hardener : Metaflex - PQ10050-024-00 TH6.7365 - -
Coatings
FCR
/ Netherland
thinner : C25/90S
Akzo Nobel base : Metaflex FCR
Aerospace hardener : Metaflex
24 A-E Wash primer. AIMS04-04-012 - - Z-12.120 I+D-P-60 - - A-E
Coatings FCR
/ Netherland thinner : C25/90S

IPS04-04-012-02 P99
PPG Aerospace /
24 A-E Wash primer. AIMS04-04-012 IPS04-04-012-04 base : 7641/3600 - Z-12.120 I+D-P-60 - - -
France
IPS04-04-012-05 hardener : 0841/9000
thinner : 0434/9000
base : N54628
PPG Aerospace /
24 A-E Wash primer. Z-12.120 - hardener : N37678 - Z-12.120 I+D-P-60 - - A-E
UK
thinner : N39/3010
base : N54628
24 A-D Wash primer. WLB5.7002 - PPG Aerospace hardener : N37678 - TNA00710003MT1 18 80-T-35-5000 - - -
thinner : N39/3080
Akzo Nobel
base : Metaflex FCR
Aerospace
24 A-D Wash primer. WLB5.7002 - hardener : FCR thinner - TNA00710003MT1 18 80-T-35-5000 - - -
Coatings
: C25/90S
/ Netherland
base : GL40-1213
24 A-D Wash primer. WLB5.7002 - BASF-Lackchemie hardener : SC10-2013 - TNA00710003MT1 18 80-T-35-5000 - No longer available A-D
thinner : SV51-0110
Akzo Nobel base : Metaflex
Aerospace FCRA176
24 SON Wash primer. - - - 301 SO PS6.6003.01 - - -
Coatings hardener : FCRA177
/ Netherland thinner: CP
P99
PPG Aerospace / base : 7641/3600
24 SON Wash primer. - - - 320 SO PS6.6003.01 - - -
France hardener : 0841/9000
thinner : 0434/9000
Akzo Nobel base : Metaflex WR
TT scheme not
Aerospace hardener : Metaflex
24 A-UK Wash primer. - - - TT ABP4-2134 - compliant with UK A-UK
Coatings WR
VOC legislation.
/ Netherland thinner : C25/90S
Akzo Nobel base : Metaflex FCR
TT scheme not
Aerospace hardener : Metaflex
24 A-UK Wash primer. - - - TT - - compliant with UK A-UK
Coatings FCR
VOC legislation.
/ Netherland thinner : C25/90S
base : PP609 TT scheme not
PPG Aerospace /
24 A-UK Wash primer. - - hardener : CTH609 - TT ABP4-2134 - compliant with UK A-UK
UK
thinner : T105 VOC legislation.
base : F565-629
PPG Aerospace /
24 A-UK Wash primer. - - hardener : F275-134 - TT ABP4-2134 - no longer available A-UK
UK
thinner : 851-1179
base : 9210-P-3011
hardener : 2000-7-
24 A-UK Wash primer. - - PPG Aerospace - TT ABP4-2134 - no longer available A-UK
0292
thinner : 2000-6-0308
Akzo Nobel base : Metaflex FCR
Aerospace hardener : Metaflex
24 A-E Wash primer. - - - Z-12.120 I D-P-60 - - -
Coatings FCR
/ Netherland thinner : C25/90S

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 42
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Decorative
polyurethane
exterior
PU66-5411
paint to be ASNA3646
base : 09123
27 A-F applied on TNA00710158 - PPG Aerospace - PQ10050-027-00 - - no longer available A-F
hardener : 07867
polyurethane PQ10050-027-03
thinner : 09124
top coat. (colours
according to
drawing)
Decorative
polyurethane
exterior
Akzo Nobel
paint to be base : HF77240
Aerospace PQ10050-027-00
27 A-F applied on TNA00710158 - hardener : S66/22R - - - - A-F
Coatings PQ10050-027-04
polyurethane thinner : C25/90S
/ Netherland
top coat. (colours
according to
drawing)
Decorative
polyurethane
exterior
ASNA3646
paint to be Akzo Nobel
PQ10050-027-00 IPDA64-03
27 A-F applied on - - Aerospace Aerodex - - - A-F
PQ10050-027-05
polyurethane Coatings
top coat. (colours
according to
drawing)
Antislip paint for
base : antiderapant
evacuation are
09123 PQ10050-028-00
28 A-F on AIMS04-04-024 - PPG Aerospace - - - no longer available A-F
hardener : 07867 PQ10050-028-01
the upper surface
thinner : 3134
of the wing.
Antislip paint for
Not VOC
evacuation area base : 5469/0181
PPG Aerospace PQ10050-028-00 compliant.To be
28 A-F on the upper AIMS04-04-024 - hardener : 0730/9000 - IPDA64-03 - A-F
/France PQ10050-028-02 replaced by
surface of the thinner : 0491/9000
PQ10050-392-00
wing.
Akzo Nobel
Gold or silver PQ10050-029-00
29 A-F - - Aerospace Autocryl - IPDA64-03 - - -
decorative paint. PQ10050-029-02
Coatings
PU66 ASNA3669
Gold or silver PPG Aerospace /
29 A-F TNA00710028 - 5441-7114 - PQ10050-029-00 IPDA64-03 - - -
decorative paint. France
PQ10050-029-03
PU66mat
ASNA5073
Exterior mat top PPG Aerospace base : 5462/0001
30 A-F TNA00710028 - - PQ10050-030-00 IPDA64-03 - - -
coat. /France hardener : 0730/9000
PQ10050-030-01
thinner : 0491/9000
Celogliss
ASNA3632 AIPS05-02-
Abrasion re- AIMS04-04-007 PPG Aerospace base : 5456/0001
32 A-F ASNA4289 - PQ10050-032-00 003 - -
sistant paint. ASN-B 70720 /France hardener : 0730/9000
PQ10050-032-03 IPDA64-03
thinner : 0491/9000
Akzo Nobel
base : Aerodur ARC AIPS05-02-
Abrasion re- Aerospace PQ10050-032-00
32 A-F AIMS04-04-007 - hardener : S66/22R - 003 - - A-F
sistant paint. Coatings PQ10050-032-01
thinner : C25/90S IPDA64-03
/ Netherland
Akzo Nobel
base : Aerodur ARC
Abrasion re- Aerospace
32 A-D - - hardener : S66/22R - TNA00710003MT1 34 80-T-35-5254 - - -
sistant paint. Coatings
thinner : C25/90S
/ Netherland

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 43
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Abrasion re-
32 A-D - - MAGNA COATING Laminar X 500 - 80-T-35-5254 80-T-35-5254 - not listed in 80-T-35-5254 A-D
sistant paint.
Akzo Nobel
base : Aerodur ARC
Abrasion re- Aerospace
32 A-F - - hardener : S66/22R - PQ10050-032-00 TH6.7353 - - -
sistant paint. Coatings / Nether-
thinner : C25/90S
land
Celogliss
base : 5456/0001
Abrasion re- PPG Aerospace
32 A-E - - hardener : - Z-12.520 I+D-P-59 - - -
sistant paint. /France
0730/9000thinner :
0491/9000
Akzo Nobel
base : Aerodur ARC
Abrasion re- Aerospace
32 A-E - - hardener : S66/22R - Z-12.515 I+D-P-59 - - -
sistant paint. Coatings / Nether-
thinner : C25/90S
land
Abrasion re-
32 A-UK - - MAGNA COATING Laminar X 500 - VA ABP4-2124 - No longer available A-UK
sistant paint.
Abrasion re-
32 A-UK - - MAGNA COATING 7-X-74 FC - VA ABP4-2124 - No longer available A-UK
sistant paint.
CA9100
Abrasion re- PPG Aerospace / base : CA9100
32 A-UK AIMS04-04-007 IPS04-04-007-02 - VA ABP4-2124 - - -
sistant paint. UK hardener : CA8000B
Reducer : CA8000C2
Akzo Nobel
VOC compliant
Abrasion re- Aerospace base : 23-T3
32 A-UK - - - VA ABP4-2124 - abrasion resistant A-UK
sistant paint. Coatings hardener : PC-216
paint
/ Waukegan
Celogliss
Abrasion re- PPG Aerospace / base : 5456/0001
32 SON - - - 305 SO PS6.6102 - - -
sistant paint. France hardener : 0730/9000
thinner : 0491/9000
base : F407-616
Abrasion re- PPG Aerospace /
32 SON - - hardener : F210-731 - - - - - SON
sistant paint. UK
thinner : 851-808
Akzo Nobel
base : Aerodur ARC AIPS05-02-
Abrasion re- Aerospace PQ10050-032-00
32 A-F - - hardener : S66/22R - 003 - - -
sistant paint. Coatings PQ10050-032-01
thinner : C25/90S IPDA 64-03
/ Netherland
Abrasion re-
32 - - - PPG Aerospace - VA ABP4-2124 - - -
sistant paint.
PQ10050-062-00
62 A-F Edge sealer. - - 3M 4150S - IPDA28-05 - - A-F
PQ10050-062-01
Aerodur clear coat
Akzo Nobel
UVR ASNA5151
- - Aerospace
62 A-F Edge sealer. base : UVR clear coat - PQ10050-062-00 IPDA28-05 - - -
AIMS04-04-022 IPS04-04-022-01 Coatings
hardener : 66/22R PQ10050-062-02
/ Netherland
thinner : C25/90S
Colourless
62 A-D WL5.7022 - BASF-Lackchemie LK93-0653 - 80-T-35-5209 80-T-35-5209 - No longer available A-D
varnish.
Colourless
78 A-D WL5.7022 - PPG Aerospace N39959 - 80-T-35-5209 80-T-35-5209 - - -
varnish.
Akzo Nobel
Finish for Aerospace
78 A-D - - Aerodur Finish - 80-T-39-1028 80-T-39-1028 - - -
serigraphy. Coatings
/ Netherland
Fluorescent
PPG Aerospace / PQ10050-106-00
106 A-F polyurethane - - 8525 - - - No longer available A-F
France PQ10050-106-01
paint.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 44
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Fluorescent ASNA5098
106 A-F polyurethane - - MAPAERO AEROMAP 1000 - PQ10050-106-00 - - - A-F
paint. PQ10050-106-02
Fluorescent Aerospace
hardener : 66/22R PQ10050-106-00
106 A-F polyurethane - - Coatings - - - - -
thinner : C25/90S PQ10050-106-03
paint. / Netherland
Fluorescent base : CA8000E
PQ10050-106-00
106 A-F polyurethane - - PRC DE SOTO hardener : CA8000B - - - - -
PQ10050-106-04
paint. thinner : CA8000C1
Conductive PQ10050-108-00
108 A-F - - KLEBER Prenite 100078 - - - - A-F
varnish. PQ10050-108-01
Akzo Nobel
AIPS05-02-
U.V.R varnish Aerospace Aerodur Clearcoat PQ10050-110-00
110 A-F AIMS04-04-023 - - 003 - - A-F
semi gloss. Coatings Semi-gloss PQ10050-110-01
IPDA64-03
/ Netherland
base : 5541/9000 AIPS05-02-
U.V.R varnish PPG Aerospace PQ10050-110-00
110 A-F AIMS04-04-023 - hardener : 0701/9000 - 003 - - A-F
semi gloss. /France PQ10050-110-02
thinner : 0477/9000 IPDA64-03
Akzo Nobel
AIPS04-02-
U.V.R varnish Aerospace Aerodur Clearcoat PQ10050-110-00
110 A-F - - - 003 - - -
semi gloss. Coatings Semi-gloss PQ10050-110-01
IPDA64-03
/ Netherland
base : 5541/9000 AIPS05-02-
U.V.R varnish PPG Aerospace PQ10050-110-00
110 A-F - - hardener : 0701/9000 - 003 - - -
semi gloss. /France PQ10050-110-02
thinner : 0477/9000 IPDA64-03
Akzo Nobel
AIPS05-02- Not VOC compliant. To be
U.V.R varnish Aerospace Aerodur Clearcoat PQ10050-111-00
111 A-F AIMS04-04-023 - - 003 - replaced by A-F
glossy. Coatings UVR PQ10050-111-01
IPDA 64-03 PQ10050-440-00
/ Netherland
base : 5540/9000 AIPS05-02- Not VOC compliant. To be
U.V.R varnish PPG Aerospace PQ10050-111-00
111 A-F AIMS04-04-023 - hardener : 0701/9000 - 003 - replaced by A-F
glossy. /France PQ10050-111-02
thinner : 0477/9000 IPDA64-03 PQ10050-440-00
Temporary
PQ10050-112-00
112 A-F protection - - SOCOMOR Propaco SC - IPDA64-18 - - -
PQ10050-112-01
product
Temporary ASNA5059
112 A-F protection ASN-B70690 - PPG Aerospace base : 8300 or 8340 - PQ10050-112-00 IPDA64-18 - - -
product PQ10050-112-02
Akzo Nobel
Anti reflexion
Aerospace PQ10050-114-00
114 A-F protective - - Matting Clear - - - - -
Coatings PQ10050-114-01
varnish - Mat.
/ Netherland
Anti reflexion
PPG Aerospace PU66 PQ10050-114-00
114 A-F protective - - - - - No longer available -
/France 5462/9000 PQ10050-114-02
varnish - Mat.
Anti reflexion ASNA5101
PPG Aerospace / PU66
114 A-F protective - - - PQ10050-114-00 - - - -
France 5544/9000
varnish - Mat. PQ10050-114-03
base :
Anti reflexion
CA8720M0900C PQ10050-114-00
114 A-F protective - - PPG Aerospace - - - -
hardener : CA8000B PQ10050-114-04
varnish - Mat.
thinner : CA8000C2
Anti erosion PPG Aerospace / Celoflex 95 PQ10050-117-00
117 A-F AIMS04-04-016 IPS04-04-016-01 - IPDA64-05 - - -
paint. France base : 5478/0000 PQ10050-117-01
Anti erosion PPG Aerospace /
117 A-UK AIMS04-04-016 IPS04-04-016-01 Celoflex 95 - ABP4-2133 ABP4-2133 - Preferred material -
paint. France
Interflex
Anti erosion base : 5470/0000
117 A-UK - - PPG Aerospace - - ABP4-2133 - no longer available A-UK
paint. hardener : 0770/9000
thinner : 0470/9000

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 45
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Anti erosion PPG Aerospace /
117 A-D AIMS04-04-016 IPS04-04-016-01 Celoflex 95 - TNA00710003MT2 661 - - - -
paint. France
Anti erosion PPG Aerospace /
117 A-E AIMS04-04-016 IPS04-04-016-01 Celoflex 95 - Z-12.547 I+D-P-313 - - -
paint. France
Celoflex 95
Anti erosion PPG Aerospace / base : 5478/0000
117 SON AIMS04-04-016 IPS04-04-016-01 - 326 SO PS6.6123.01 - - -
paint. France hardener : 0778/9000
thinner : 0470/9000NV
CA40000
ASNA5075
PPG Aerospace / base : 5695/7000
118 A-F Mica varnish. - - - PQ10050-118-00 - - - A-F
France hardener : 796/9000
PQ10050-118-01
thinner : 0564/9000
Primer for base : Isomap P23
PQ10050-130-00
130 A-F external paint TNA00710028 - MAPAERO hardener : Isomap P23 - - - - A-F
PQ10050-130-01
scheme. thinner : P2
Primer for base : Isomap P23
130 A-D external paint TNA00710028 - MAPAERO hardener : Isomap P23 - - 80-T-35-9127 - - A-D
scheme. thinner : P2
Primer for base : Isomap P23
130 A-E external paint TNA00710028 - MAPAERO hardener : Isomap P23 - Z-12.136 - - - A-E
scheme. thinner : P2
Primer for base : Isomap P23
130 SON external paint TNA00710028 - MAPAERO hardener : Isomap P23 - 321 SO PS6.6007.01 - - SON
scheme. thinner : P2
base : Mapstrip S15
Barrier coat for
hardener : Mapstrip PQ10050-131-00
130 A-F external paint TNA00710028 - MAPAERO - - - - A-F
S15 PQ10050-131-01
scheme.
thinner : P2
base : Mapstrip S15
Barrier coat for
hardener : Mapstrip
131 A-D external paint TNA00710028 - MAPAERO - - 80-T-35-9127 - - A-D
S15
scheme.
thinner : P2
base : Mapstrip S15
Barrier coat for
hardener : Mapstrip
131 A-E external paint TNA00710028 - MAPAERO - Z-12.137 - - - A-E
S15
scheme.
thinner : P2
base : Mapstrip S15
Barrier coat for
hardener : Mapstrip
131 SON external paint TNA00710028 - MAPAERO - 062 SO PS6.6125.01 - - SON
S15
scheme.
thinner : P2
base : Aeromap 1000
ASNA5021 Not VOC compliant.
U.V.R external hardener : Aeromap
132 A-F TNA00710028 - MAPAERO - PQ10050-132-00 IPDA64-03 - To be replaced by A-F
top coat. 1000
PQ10050-132-01 PQ10050-410-00
thinner : P2
base : Aeromap 1000
U.V.R external hardener : Aeromap
132 A-D TNA00710028 - MAPAERO - - 80-T-35-9127 - - -
top coat. 1000
thinner : P2
base : Aeromap 1000
U.V.R external hardener : Aeromap
132 A-E TNA00710028 - MAPAERO - Z-12.389 - - - A-E
top coat. 1000
thinner : P2
base : Aeromap 1000
U.V.R external hardener : Aeromap
132 SON - - MAPAERO - 322 SO PS6.6101.01 - - -
top coat. 1000 or 6500
thinner : P2
base : Aeromap 1000
ASNA5022 Not VOC compliant.
U.V.R decorative hardener : Aeromap
133 A-F TNA00710028 - MAPAERO - PQ10050-133-00 IPDA64-03 - To be replaced by A-F
external top coat. 1000
PQ10050-133-01 PQ10050-425-00
thinner : P2

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 46
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
base : Aeromap 1000
U.V.R decorative hardener : Aeromap
133 A-E TNA00710028 - MAPAERO - Z-12.389 - - - A-E
external top coat. 1000
thinner : P2

External primer
Akzo Nobel
to be used before PQ10050-150-00
150 A-F - - Aerospace 10-P1-16 - - - Do not use. A-F
top coat following PQ10050-150-01
Coatings / ITALY
PQ10050-151-
00.
External top coat
to be used on
Akzo Nobel ASNA3682
external primer
151 A-F - - Aerospace Serie 24F2 / 26F2 - PQ10050-151-00 - - Do not use. A-F
following
Coatings / ITALY PQ10050-151-01
PQ10050-150-
00.

External primer
to be used before Akzo Nobel
PQ10050-152-00
152 A-F barrier coat - - Aerospace 10-P4-27 - - - Do not use. A-F
PQ10050-152-01
following Coatings / ITALY
PQ10050-153-
00.
Barrier coat to be
used on external Akzo Nobel
PQ10050-153-00
153 A-F primer following - - Aerospace 10-P1-29 - - - Do not use. A-F
PQ10050-153-01
PQ10050-152- Coatings / ITALY
00.
External U.V.R
top coat to be
used on Akzo Nobel ASNA5025
154 A-F transition coat - - Aerospace 24F20 - PQ10050-154-00 - - Do not use. A-F
following Coatings / ITALY PQ10050-154-01
PQ10050-153-
00.
Wash primer to
Akzo Nobel
use before PQ10050-155-00
155 A-F - - Aerospace 40-P1-6 - - - Do not use. A-F
PQ10050-152- PQ10050-155-01
Coatings / ITALY
00.
Primer for barrier base : Intergrad90
PPG Aerospace PQ10050-156-00 to be used with
156 A-F coat paint TNA00710028 - hardener : 0611/9000 - - - A-F
/France PQ10050-156-01 PQ10050-157-00
scheme. thinner : 0950/9000
base : Intergard 90
Primer for barrier
PPG Aerospace 4120/3600
156 A-E coat paint TNA00710028 - - Z-12.136 - - - A-E
/France hardener : 0611/9000
scheme.
thinner : 0950/9000
Barrier coat to be
base : CA30000
used on PPG Aerospace PQ10050-157-00 To be used with
157 A-F TNA00710028 - hardener : 0160/9000 - IPDA64-03 - A-F
PQ10050-156- /France PQ10050-157-01 PQ10050-156-00.
thinner : 0960/9000
00.
Barrier coat to be CA30000 0280/1590
used on PPG Aerospace hardener :
157 A-E TNA00710028 - - Z-12.137 - - - A-E
PQ10050-156- /France 0160/9000thinner :
00. 0960/9000
CA40000
AIMS04-04-012 ASNA5032
U.V.R external PPG Aerospace base : 5692 AIPS05-02-
158 A-F TNA00710028 IPS04-04-012-02 - PQ10050-158-00 - - A-F
top coat. /France hardener : 0796/9000 003
TNA00710113 PQ10050-158-01
thinner : 0564/9000

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 47
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
ASNA5032
Akzo Nobel base : C21/100 UVR Not VOC compliant.
U.V.R external AIMS04-04-012 ASNA5095 AIPS05-02-
158 A-F - Aerospace hardener : S66/22R - - To be replaced by A-F
top coat. TNA00710028 PQ10050-158-00 003
Coatings thinner : 96184 PQ10050-410-00
PQ10050-158-02

T V represents ABP
base : CA40000 4-1123 + ABP 4
U.V.R external TT ABP4-2127
158 A-UK - - PPG Aerospace hardener : 0796/9000 - - 2127.TT no longer A-UK
top coat. TV ABP4-2134
thinner : 0576/9000 used. Not VOC compliant in
accordance with UK
legislation
T V represents ABP 4-1123 + ABP 4
base : CA40000
U.V.R external TT ABP4-2127 2127.TT no longer used. Not VOC
158 A-UK - - PPG Aerospace hardener : 0796/9000 - - A-UK
top coat. TV ABP4-2134 compliant accordance with UK
thinner : 0945/9000
legislation.
CA40000
U.V.R external ASNA5031
PPG Aerospace / base : 5691
159 A-F decorative top TNA00710028 - - PQ10050-159-00 - - - A-F
France hardener : 0796/9000
coat. PQ10050-159-01
thinner : 0564/9000
C21/100 UVR 77284
6/8h
U.V.R external Akzo Nobel base : C21/100 UVR ASNA5031 Not VOC compliant.
AIMS04-04-025 - AIPS05-02-
159 A-F decorative top Aerospace 77284 - ASNA5096 PQ10050-159-00 - To be replaced by A-F
TNA00710028 IPS04-04-025-02 003
coat. Coatings hardener : S66/22R PQ10050-159-02 PQ10050-425-00
thinner1 : 96184
thinner2 : C25/90S
U.V.R external
PPG Aerospace /
159 A-E decorative top - - CA 40000 - Z-12.389 - - - A-E
France
coat.
External primer
to be used before
PQ10050-160-00
160 A-F top coat following - - PPG Aerospace 513 x 377 - IPDA64-03 - No basic. A-F
PQ10050-160-01
PQ10050-161-
00.
External top coat
to be used on ASNA5028
PPG Aerospace /
161 A-F primer following - - 420 HS - PQ10050-161-00 - - No basic. A-F
UK
PQ10050-160- PQ10050-161-01
00.
Decorative top
coat to be
ASNA5029
applied on top PPG Aerospace /
162 A-F - - 420 HS (6H) - PQ10050-162-00 - - No basic. A-F
coat following UK
PQ10050-162-01
PQ10050-161-
00.
PQ10050-163-00
163 A-F U.V.R. varnish. - - PPG Aerospace 820 x 359 - IPDA64-03 - No basic. A-F
PQ10050-163-01
CLEARCOAT ALEXIT
411-14
base : ALEXIT 411-14
AIPS05-02-
163 - U.V.R. varnish. AIMS04-04-023 IPS04-04-023-04 MANKIEWICZ hardener : ALEXIT - - - - -
003
405-86
thinner : ALEXIT 901-
72
Antifretting PTFE PPG Aerospace / PQ10050-164-00
164 A-F - - 420 HS TEFLONNEE - - - No basic. A-F
varnish. UK PQ10050-164-01
ASNA5043
U.V.R. external
165 A-F - - PPG Aerospace LLT 2000 - PQ10050-165-00 IPDA64-03 - No basic. A-F
top coat.
PQ10050-165-01

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 48
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Paint to be
applied directly
on PQ10050-168-00 Local application
168 A-F - - PPG Aerospace 4125 - - - -
external surfac- PQ10050-168-01 only.
es-Local applica-
tion.
Epoxy-polyamide PQ10050-170-00
170 A-F - - AERAZUR Cauwet 706025 - - - - -
varnish. PQ10050-170-01
ASNA5068
Decorative
180 A-F - - PPG Aerospace 4080 - PQ10050-180-00 - - - -
temporary paint.
PQ10050-180-01
Akzo Nobel
ASNA5068
Decorative Aerospace Finitions NC4
180 A-F - - - PQ10050-180-00 - - no longer available -
temporary paint. Coatings thinner : CL11-1591
PQ10050-180-02
/ France
CHROME FREE
PRIMER CA7049 base
: CA7049
Hardener : CA7049B1
thinner : CA7049CX
TOP COAT DESO-
Chrome free THANE HS CA8000
external paint base : CA8000 AIPS05-02-
390 A-F AIMS04-04-031 IPS04-04-031-01 PPG Aerospace - ABS5487S****A1 - - -
system : hardener : CA8000B 003
P+TC thinner : CA8000C (top
coat 10/12h) or
CA8000C1 (top coat
6/8h) or CA8000C2
(top
coat 3/4h)

AVIOX CF PRIMER
37124
base : 37124
hardener : 92245
Aviox finish 77702
Chrome free base : 77702
external paint hardener : 90150 AIPS05-02-
390 A-F AIMS04-04-031 IPS04-04-031-02 ANAC - ABS5487S****A2 - - -
system : activator : 99330 (top 003
P+TC coat 3/5h) or 99321
(top
coat 10/12h) or 99322
(top coat 7/9h) or
99341
(top coat 14/17h)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 49
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
SEEVENAX CF 113-
44
base : H/S 113-44
hardener : 135-44
activator : 902-44
Top coat ALEXIT 411-
77
Chrome free base : 411-77
external paint hardener : 405-77 AIPS05-02-
390 A-F AIMS04-04-031 IPS04-04-031-04 MANKIEWICZ - ABS5487S****A4 - - -
system : thinner : 902-27 (top 003
P+TC coat 15/18h) or 902-37
(top coat 11/14h) or
902-47 (top coat
9/12h) or
902-57 (top coat 7/9h)
or 902-67 (top coat
3/5h)

CHROME FREE
PRIMER CA7049 base
: CA7049
hardener : CA7049B1
thinner : CA7049CX
TOP COAT DESO-
THANE HS CA8000
Chrome free
base : CA8000
external paint
390 A-UK AIMS04-04-031 IPS04-04-031-01 PPG Aerospace hardener : CA8000B - TQ ABP 4-2364 - - -
system :
thinner : CA8000C (top
P+TC
coat 10/12h) or
CA8000C1 (top coat
6/8h) or CA8000C2
(top
coat 3/4h) or
CA8000C3 (top coat
1/2h)

AVIOX CF PRIMER
37124
base : 37124
hardener : 92245
Aviox finish 77702
base : 77702
Chrome free hardener : 90150
external paint activator : 99321 (top
390 A-UK AIMS04-04-031 IPS04-04-031-02 ANAC - TQ ABP 4-2364 - - -
system : coat 10/12h) or 99322
P+TC (top coat 7/9h) or
99330 (top coat 3/5h)
or
99341 (top coat
14/17h)
Retarder : 98127 (top
coat >20h

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 50
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
CHROME FREE
PRIMER CA7049 base
: CA7049
hardener : CA7049B1
thinner : CA7049C
TOP COAT DESO-
Chrome free
THANE HS CA8000
external paint AIPS05-02-
390 A-E AIMS04-04-031 IPS04-04-031-01 PPG Aerospace base : CA8000 - Z-12145 - - -
system : 003
hardener : CA8000B
P+TC
Thinner : CA8000C
(top coat 10/12h) or
CA8000C1 (top coat
6/8h) or CA8000C2
(top
coat 3/4h)
AVIOX CF PRIMER
37124
base : 37124
hardener : 92245
Aviox finish 77702
base : 77702
Chrome free hardener : 90150
external paint activator : 99321 (top AIPS05-02-
390 A-E AIMS04-04-031 IPS04-04-031-02 ANAC - Z-12145 - - -
system : coat 10/12h) or 99322 003
P+TC (top coat 7/9h) or
99330 (top coat 3/5h)
or
99341 (top coat
14/17h)
Retarder : 98127 (top
coat >20h)

SEEVENAX CF 113-
44 base :
H/S 113-44 hardener :
135-44 activator : 902-
44
Top coat ALEXIT
411-77
Chrome free
base : 411-77
external paint
390 A-UK - - MANKIEWICZ hardener : 405-77 - - - - - -
system :
thinner : 902-27 (top
P+TC
coat 15/18h) or 902-37
(top coat 11/14h) or
902-47 (top coat
9/12h) or
902-57 (top coat 7/9h)
or 902-67 (top coat
3/5h)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 51
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Chromate free primer
CA 7049
base : CA 7049
hardener : CA 7049B1
thinner : CA 7049CX
INTERMEDIATE
COAT F565-4010
base : F565-4010
Chrome free hardener : F275-189
external paint thinner : T230
AIPS05-02-
391 A-F system AIMS04-04-032 IPS04-04-032-01 PPG Aerospace thinner2 : T239 - ABS5805S****A1 - - -
003
with intermediate Top coat Desothane
coat : P+IC+TC HS CA8000
base : CA 8000
hardener : CA 8000B
thinner : CA 8000C
(top coat 10/12h) or
CA
8000C1 (top coat 6/8h)
or CA 8000C2 (top
coat 3/4h)

AVIOX CF PRIMER
37124
base : 37124
hardener : 92245
INTERMEDIATE
COAT AERODUR
SEALER 42.240
base : Aerodur sealer
Chrome free 42.240
external paint hardener : 98066 AIPS05-02-
391 A-F system AIMS04-04-032 IPS04-04-032-02 ANAC Aviox finish 77702 - ABS5805S****A2 - - -
003
with intermediate base : 77702
coat : P+IC+TC hardener : 90150
activator : 99321 (top
coat 10/12h) or 99322
(top coat 7/9h) or
99330 (top coat 3/5h)
or
99341 (top coat
14/17h)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 52
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Primer SEEVENAX
CF 113-44 base :
SEEVENAX H/S 113-
44 hardener :
SEEVENAX 135-44
activator : SEEVENAX
902-44 Intermediate
coat Celerol 990-0
base : Celerol 990-09
hardener : Celerol 995-
09
Chrome free thinner : Celerol 903-
external paint 09
AIPS05-02-
391 A-F system AIMS04-04-032 IPS04-04-032-03 MANKIEWICZ Top coat ALEXIT 411- - ABS5805S****A3 - - -
003
with intermediate 77 base : ALEXIT 411-
coat : P+IC+TC 77
hardener : ALEXIT
405-77
thinner : ALEXIT 902-
37 (top coat 11/14h) or
ALEXIT 902-47 (top
coat 9/12h) or ALEXIT
902-57 (top coat 7/9h)
or ALEXIT 902-67 (top
coat 3/5h) or ALEXIT
902-27 (top coat
15/18h)
Antislip emer- CA8030 To be applied on a low VOC topcoat
gency / walkway base : CA8030R09001 AIPS05-02- or chromated external paint or
392 A-F AIMS04-04-024 IPS04-04-024-01 PPG Aerospace - ABS5493S****A1 - -
paint hardener : CA8000B 003 chrome free
scheme P+TC thinner : CA8000C3 external paint
Antislip emer-
base : Aviox non slip To be applied on a low VOC topcoat
gency / walkway AIPS05-02-
392 A-F AIMS04-04-024 IPS04-04-024-02 ANAC hardener : 90150 - ABS5493S****A2 - orchromated external -
paint 003
thinner : 99330 paint or chrome free external paint
scheme P+TC

Primer CA7002
base : CA7002
hardener : CA7002B
Top coat Desothane
HS CA8000
base : CA 8000
External paint P AIPS05-02-
393 A-F AIMS04-04-013 IPS04-04-013-02 PPG Aerospace hardener : CA 8000B - ABS5489S****A2 - - -
TC 003
Thinner : CA 8000C
(top coat 10/12h) or
CA
8000C1 (top coat 6/8h)
or CA 8000C2 (top
coat 3/4h)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 53
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
AVIOX PRIMER 37098
base : 37098
hardener : 92186
Aviox finish 77702
base : 77702
hardener : 90150
External paint P activator : 99321 (top AIPS05-02-
393 A-F AIMS04-04-013 IPS04-04-013-03 ANAC - ABS5489S****A3 - - -
TC coat 10/12h) or 99322 003
(top coat 7/9h) or
99330 (top coat 3/5h)
or
99341 (top coat
14/17h)

PR205 primer
base : PR205
hardener : ACT205
CA8000 Topcoat base
External paint P AIPS05-02-
393 - AIMS04-04-013 IPS04-04-013-01 PPG Aerospace : CA8000/... - ABS5489S****A1 - - -
TC 003
hardener : CA8000B
thinner1 : CA8000C1
thinner2 : CA8000C2
thinner3 : CA8000C3
Aerodur HS primer
base : 37092
Akzo Nobel hardener : 92217
External paint P AIPS05-02-
393 - AIMS04-04-013 IPS04-04-013-04 Aerospace Aviox finish 77708 - ABS5489S****A4 - - -
TC 003
Coatings base : Aviox finish
77708
hardener : 90100
Primer CA7002
base : CA7002
hardener : CA7002B
External paint P AIPS05-02-
393 - AIMS04-04-013 IPS04-04-013-05 PPG Aerospace Top coat Desothane - ABS5489S****A5 - - -
TC 003
HS CA8221
base : CA8221
hardener : CA8200B
Chromate free primer
CA 7049
base : CA 7049
External paint
hardener : CA 7049B1
Chromate free AIPS05-02-
394 A-F AIMS04-04-034 IPS04-04-034-01 PPG Aerospace thinner : CA 7049CX - ABS5817S****A1 - - -
P+ 003
Wing coating CA 8900
Wings coating
base : CA 8900
hardener : CA 8000B
thinner : CA 8000C3

AVIOX CF PRIMER
37124
External paint base : 37124
Chromate free hardener : 92245 AIPS05-02-
394 A-F AIMS04-04-034 IPS04-04-034-02 ANAC - ABS5817S****A2 - - -
P+ Aeroflex HS 113F01 003
Wings coating base : HS 113F01
hardener : 90121
activator : 99330

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 54
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
AVIOX CF PRIMER
37124
base : Aviox CF primer
External paint 37124
Akzo Nobel
Chromate free P hardener : 92245 AIPS05-02-
394 - AIMS04-04-034 IPS04-04-034-03 Aerospace - ABS5817S****A3 - - -
Wings Aeroflex HS 113F02 003
Coatings
coating base : Aeroflex HS
113F02
hardener : 90150
activator : 99322
Base coat Alexit HS
411-22
base : ALEXIT 411-22
hardener : ALEXIT
405-86 thinner :
Basecoat
ALEXIT 902-02
Clearcoat for AIPS05-02-
395 A-F AIMS04-04-025 IPS04-04-025-04 MANKIEWICZ Clearcoat ALEXIT - ABS5812D****A4 - - -
external 003
411-14
decoration
base : ALEXIT 411-14
hardener : ALEXIT
405-86
thinner : ALEXIT 901-
72
Base coat AERO-
BASE
base : 371256
hardener : 370637
thinner : 370638
Basecoat
Akzo Nobel Aviox Clearcoat UVR
Clearcoat for
395 A-UK AIMS04-04-025 IPS04-04-025-07 Aerospace base : 343359 harden- - - - - - -
external
Coatings er : 350650 activator 1
decoration
: 651697 activator 2 :
350653 activator 3 :
353406 activator 4 :
362941 thinner :
369321
Desothane HS CA
Wear resistant
8100
coating for areas
396 A-F AIMS04-04-027 IPS04-04-027-01 PPG Aerospace base : CA8100 - ABS5821W****A1 - - - -
with low chemical
hardener : CA8000B
impact
thinner : CA8000C2
Wear resistant CA9100
coating for areas base : CA9100
396 - AIMS04-04-027 IPS04-04-027-02 PPG Aerospace - ABS5821W****A2 - - - -
with low chemical hardener : CA8000B
impact Reducer : CA8000C2
Wear resistant CA9100
coating for areas base : CA9100
396 - AIMS04-04-027 IPS04-04-027-02 PPG Aerospace - ABS5821W***A2 - - - -
with low chemical hardener : CA8000B
impact Reducer : CA8000C2
External chro-
mate free system
Aviox CF Primer
P+
397 A-F AIMS04-04-036 IPS04-04-036-01 ANAC 37124 - ABS5823S****A1 - - - -
Matt top coat
Aerodur 5000 Finish
applied on basic
primer
External chro-
mate free system
Chrome free CA 7049
P+
397 A-F AIMS04-04-036 IPS04-04-036-02 PPG Aerospace Desothane HS CA - ABS5823S****A2 - - - -
Matt top coat
8211
applied on basic
primer

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 55
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
AVIOX PRIMER 37098
base : Aviox primer
37098
Wing coating hardener : 92186
chromated Aeroflex HS 113F01
398 A-F AIMS04-04-026 IPS04-04-026-01 ANAC - - - - - -
system Base : Aeroflex HS
P+TC 113F01
Hardener : 90121
activator : 99322 or
99330
P99
base : P99
hardener : 841
Wing coating
thinner : 434
chromated
398 A-F AIMS04-04-026 IPS04-04-026-02 PPG Aerospace CA 8900 - - - - - -
system
base : 8900
P+TC
hardener : 8000CSB
XXX
thinner : 8000FCC-3X
AVIOX PRIMER 37098
base : Aviox primer
37098
Wing coating
hardener : 92186
chromated
398 A-F AIMS04-04-026 IPS04-04-026-03 ANAC (UK) Aeroflex HS 113F02 - - - - - -
system
base : Aeroflex HS
P+TC
113F02
hardener : 90150
thinner : 99322
Aesthetical
exterior applica-
ARDROX 396/1 E14
399 A-F tion on AIMS04-04-039 IPS04-04-039-01 CHEMETALL - AIMS - - - -
pylon titanium
alloys areas
ASNA5144
Low voc chro- base : CA7002 AIPS05-02-
400 A-F AIMS04-04-013 IPS04-04-013-02 PPG Aerospace - PQ10050-400-00 - - -
mated primer hardener : CA7002B 003
PQ10050-400-01
AVIOX PRIMER 37
Akzo Nobel 098 ASNA5144
Low voc chro- AIPS05-02-
400 A-F AIMS04-04-013 IPS04-04-013-03 Aerospace base : Aviox primer - PQ10050-400-00 - - -
mated primer 003
Coatings 37098 PQ10050-400-03
hardener : 92186
Low voc chro- base : CA7002
400 A-UK AIMS04-04-013 IPS04-04-013-02 PPG Aerospace - TV ABP4-2127 - - -
mated primer hardener : CA7002B
AVIOX PRIMER 37
Akzo Nobel 098
Low voc chro-
400 A-UK AIMS04-04-013 IPS04-04-013-03 Aerospace base : Aviox primer - TV ABP4-2127 - - -
mated primer
Coatings 37098
hardener : 92186
base : F580-2080
Primer for
hardener : F275- PQ10050-405-00
405 A-F intermediate coat - - PPG Aerospace - - - - -
160thinner : F580- PQ10050-405-01
system.
1241
AIMS04-04-012 IPS04-04-012-05 DESOTHANE HS
Refer to PQ10050-
Low voc top coat. AIMS04-04-013 IPS04-04-031-01 base : CA 8000 AIPS05-02-
410 - PPG Aerospace - - - 390-00 - PQ10050 -
(3/4h) AIMS04-04-031 IPS04-04-013-02 hardener : CA 8000B 003
393-00 and
AIMS04-04-032 IPS04-04-032-01 thinner : CA 8000C2
PQ10050-391-00

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 56
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

AIMS04-04-012 IPS04-04-012-05 DESOTHANE HS Refer to PQ10050-


ASNA5140F
Low voc top coat. AIMS04-04-013 IPS04-04-013-02 base : CA 8000 AIPS05-02- 390-00 - PQ10050
410 - PPG Aerospace - PQ10050-410-00 - -
(6/8h) AIMS04-04-031 IPS04-04-031-01 hardener : CA 8000B 003 393-00 and
PQ10050-410-02
AIMS04-04-032 IPS04-04-032-01 hardener : CA 8000C1 PQ10050-391-00

AIMS04-04-012 IPS04-04-012-05 DESOTHANE HS Refer to PQ10050-


ASNA5140F
Low voc top coat. AIMS04-04-013 IPS04-04-013-02 base : CA 8000 AIPS05-02- 390-00 - PQ10050
410 - PPG Aerospace - PQ10050-410-00 - -
(10/12h) AIMS04-04-031 IPS04-04-031-01 hardener : CA 8000B 003 393-00 and
PQ10050-410-01
AIMS04-04-032 IPS04-04-032-01 thinner : CA 8000C PQ10050-391-00

Aviox finish 77702 Refer to PQ10050-


AIMS04-04-013 IPS04-04-013-03 Akzo Nobel
Low voc top coat. base : 77702 AIPS05-02- 390-00 PQ10050
410 - AIMS04-04-031 IPS04-04-031-02 Aerospace - - - -
(3/5h) hardener : 90150 003 393-00 and
AIMS04-04-032 IPS04-04-032-02 Coatings
accelerator : 99330 PQ10050-391-00

Aviox finish 77702 Refer to PQ10050-


AIMS04-04-013 IPS04-04-013-03 Akzo Nobel ASNA5140F
Low voc top coat. base : 77702 AIPS05-02- 390-00 PQ10050
410 - AIMS04-04-031 IPS04-04-031-02 Aerospace - PQ10050-410-00 - -
(6/8h) hardener : 90150 003 393-00 and
AIMS04-04-032 IPS04-04-032-02 Coatings PQ10050-410-04
accelerator : 99322 PQ10050-391-00

Aviox finish 77702 Refer to PQ10050-


AIMS04-04-013 IPS04-04-013-03 Akzo Nobel ASNA5140F
Low voc top coat. base : 77702 AIPS05-02- 390-00 PQ10050
410 - AIMS04-04-031 IPS04-04-031-02 Aerospace - PQ10050-410-00 - -
(10/12h) hardener : 90150 003 393-00 and
AIMS04-04-032 IPS04-04-032-02 Coatings PQ10050-410-03
accelerator : 99321 PQ10050-391-00

Aviox finish 77702 Refer to PQ10050-


AIMS04-04-013 IPS04-04-013-03 Akzo Nobel ASNA5140F
Low voc top coat. base : 77702 AIPS05-02- 390-00 PQ10050
410 - AIMS04-04-031 IPS04-04-031-02 Aerospace - PQ10050-410-00 - -
(14/17h) hardener : 90150 003 393-00 and
AIMS04-04-032 IPS04-04-032-02 Coatings PQ10050-410-05
accelerator : 99341 PQ10050-391-00

Top coat ALEXIT 411-


77
base : ALEXIT 411-77
Low voc top coat. AIMS04-04-031 IPS04-04-031-04 AIPS05-02- Refer to PQ10050- 390-00 and
410 - MANKIEWICZ hardener : ALEXIT - ABS5805S****A3 - -
(3/5h) AIMS04-04-032 IPS04-04-032-03 003 PQ10050-391-00
405-77
thinner : ALEXIT 902-
67

Top coat ALEXIT 411-


77
base : ALEXIT 411-77
Low voc top coat. AIMS04-04-031 IPS04-04-031-04 AIPS05-02- Refer to PQ10050- 390-00 and
410 - MANKIEWICZ hardener : ALEXIT - ABS5805S****A3 - -
(7/9h) AIMS04-04-032 IPS04-04-032-03 003 PQ10050-391-00
405-77
thinner : ALEXIT 902-
57

Top coat ALEXIT 411-


77
Low voc top coat. AIMS04-04-031 IPS04-04-031-04 AIPS05-02- Refer to PQ10050- 390-00 and
410 - MANKIEWICZ base : 411-77 - ABS5805S****A3 - -
(9/12h) AIMS04-04-032 IPS04-04-032-03 003 PQ10050-391-00
hardener : 405-77
thinner : 902-47

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 57
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

Top coat ALEXIT 411-


77
Low voc top coat. AIMS04-04-031 IPS04-04-031-04 AIPS05-02- Refer to PQ10050- 390-00 and
410 - MANKIEWICZ base : 411-77 - ABS5805S****A3 - -
(11/14h) AIMS04-04-032 IPS04-04-032-03 003 PQ10050-391-00
hardener : 405-77
thinner : 902-37

Top coat ALEXIT 411-


77
Low voc top coat. AIMS04-04-031 IPS04-04-031-04 AIPS05-02- Refer to PQ10050- 390-00 and
410 - MANKIEWICZ base : 411-77 - ABS5805S****A3 - -
(15/18h) AIMS04-04-032 IPS04-04-032-03 003 PQ10050-391-00
hardener : 405-77
thinner : 902-37

Akzo Nobel base : Aviox Finish


410 A-UK Low voc top coat. AIMS04-04-013 IPS04-04-013-04 Aerospace 77708 - TV ABP4-2127 - - -
Coatings hardener : 90100

Aviox finish 77702


Akzo Nobel base : Aviox finish
410 A-UK Low voc top coat. AIMS04-04-013 IPS04-04-013-03 Aerospace 77702 - TV ABP4-2127 - - -
Coatings hardener : 90150
thinner : 99322

DESOTHANE HS
base : CA8900 ASNA5156
AIPS05-02-
420 A-F Wing coating AIMS04-04-026 IPS04-04-026-02 PPG Aerospace hardener : CA8000B - PQ10050-420-00 - - -
003
accelerator : PQ10050-420-01
CA8000C3

Aeroflex HS 113F01
Akzo Nobel base : Aeroflex HS ASNA5156
AIPS05-02-
420 A-F Wing coating AIMS04-04-026 IPS04-04-026-01 Aerospace 113F01 - PQ10050-420-00 - - -
003
Coatings hardener : 90121 PQ10050-420-02
accelerator : 99330

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 58
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used

Aeroflex HS 113F02
Akzo Nobel base : Aeroflex HS
AIPS05-02-
420 A-F Wing coating AIMS04-04-026 IPS04-04-026-03 Aerospace 113F02 - - - - -
003
Coatings hardener : 90150
activator : 99322

DESOTHANE HS
Low voc decora- base : CA 8000 AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-01 PPG Aerospace - - - - -
tive paint. (1/2h) hardener : CA 8000B 003
thinner : CA 8000C3
DESOTHANE HS
base : CA8000 ASNA5092/ASNA5140
Low voc decora- AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA8000B - PQ10050-425-00 - - -
tive paint. (3/4h) 003
accelerator : PQ10050-425-03
CA8000C2
DESOTHANE HS
base : CA8000 ASNA5092/ASNA5140D
Low voc decora- AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA8000B - PQ10050-425-00 - - -
tive paint . (6/8h) 003
accelerator : PQ10050-425-01
CA8000C1
Aviox finish 77702
Akzo Nobel base : Aviox finish
Low voc decora- AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-03 Aerospace 77702 - - - - -
tive paint. (3/5h) 003
Coatings hardener : 90150
accelerator : 99330
Aviox finish 77702
Akzo Nobel base : Aviox finish ASNA5092/ASNA5140D
Low voc decora- AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-03 Aerospace 77702 - PQ10050-425-00 - - -
tive paint. (7/9h) 003
Coatings hardener : 90150 PQ10050-425-02
accelerator : 99322
Aviox finish 77702
Low voc decora- Akzo Nobel base : Aviox finish
AIPS05-02-
425 A-F tive paint. AIMS04-04-025 IPS04-04-025-03 Aerospace 77702 - - - - -
003
(10/12h) Coatings hardener : 90150
accelerator : 99321
Top coat ALEXIT 411-
77
base : ALEXIT 411-77
Low voc decora- AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-06 MANKIEWICZ hardener : ALEXIT - - - - -
tive paint (3/5h) 003
405-77
thinner : ALEXIT 902-
67
Top coat ALEXIT 411-
77
base : ALEXIT 411-77
Low voc decora- AIPS05-02-
425 A-F AIMS04-04-025 IPS04-04-025-06 MANKIEWICZ hardener : ALEXIT - - - - -
tive paint (7/9h) 003
405-77
thinner : ALEXIT 902-
57
base : CA 8000
Low voc decora-
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA 8000B - TV ABP4-2127 - - -
tive paint. (6/8h)
thinner : CA 8000C1
base : CA8000/
Low voc decora-
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA8000B - TV ABP4-2127 - - -
tive paint. (3/4h)
thinner : CA8000C2...
base : CA8000/...
Low voc decora-
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA8000B - TV ABP4-2127 - - -
tive paint. (1/2h)
thinner : CA8000C3

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 59
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Aviox finish 77702
Akzo Nobel base : Aviox finish
Low voc decora-
425 A-UK AIMS04-04-025 IPS04-04-025-03 Aerospace 77702 - TV ABP4-2127 - - -
tive paint. (6/8h)
Coatings hardener : 90150
thinner : 99322
base : Aviox finish
Akzo Nobel
Low voc decora- 77702 AIPS05-02- For application of
425 A-UK AIMS04-04-025 IPS04-04-025-03 Aerospace - TN - A-UK
tive paint. (3/5h) hardener : 90150 003 external markings
Coatings
accelerator : 99330
base : Aviox finish
Akzo Nobel
Low voc decora- 77702 AIPS05-02- For application of
425 A-UK AIMS04-04-025 IPS04-04-025-03 Aerospace - TN - A-UK
tive paint. (7/9h) hardener : 90150 003 external markings
Coatings
accelerator : 99322
base : Aviox finish
Low voc decora- Akzo Nobel
77702 AIPS05-02- For application of
425 A-UK tive paint. AIMS04-04-025 IPS04-04-025-03 Aerospace - TN - A-UK
hardener : 90150 003 external markings
(10/12h) Coatings
accelerator : 99321
base : CA 8000
Low voc decora- For application of
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA 8000B - TN ABP4-2127 - A-UK
tive paint. (6/8h) external markings
thinner : CA 8000C1
base : CA8000/...
Low voc decora- For application of
425 A-UK - IPS04-04-025-01 PPG Aerospace hardener : CA8000B - TN ABP4-2127 - A-UK
tive paint. (3/4h) external markings
thinner : CA8000C2
base : CA8000/...
Low voc decora- For application of
425 A-UK - IPS04-04-025-01 PPG Aerospace hardener : CA8000B - TN ABP4-2127 - A-UK
tive paint. (1/2h) external markings
thinner : CA8000C3
Aviox finish 77702
Akzo Nobel
Low voc decora- base : 77702 For application of
425 A-UK AIMS04-04-025 IPS04-04-025-03 Aerospace - TN ABP4-2126 - -
tive paint. (3/5h) hardener : 90150 external markings
Coatings
accelerator : 99330
Aviox finish 77702
Akzo Nobel
Low voc decora- base : 77702 For application of
425 A-UK AIMS04-04-025 IPS04-04-025-03 Aerospace - TN ABP4-2126 - -
tive paint. (7/9h) hardener : 90150 external markings
Coatings
accelerator : 99322
Aviox finish 77702
Low voc decora- Akzo Nobel
base : 77702 For application of
425 A-UK tive paint. AIMS04-04-025 IPS04-04-025-03 Aerospace - TN ABP4-2126 - -
hardener : 90150 external markings
(10/12h) Coatings
accelerator : 99321
base : CA 8000
Low voc decora- For application of
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA 8000B - TN ABP4-2126 - -
tive paint. (6/8h) external markings
thinner : CA 8000C1
base : CA8000/...
Low voc decora- For application of
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA8000B - TN ABP4-2126 - -
tive paint. (3/4h) external markings
thinner : CA8000C2
base : CA8000/...
Low voc decora- For application of
425 A-UK AIMS04-04-025 IPS04-04-025-01 PPG Aerospace hardener : CA8000B - TN ABP4-2126 - -
tive paint. (1/2h) external markings
thinner : CA8000C3
ASNA5118
Low voc paint AIPS05-02-
426 A-F AIMS04-04-025 - PPG Aerospace CA8000K2 - ASNA5140D - - -
(3/4h) 003
PQ10050-426-00
AVIOX CLEAR COAT
UVR
base : Aviox clear coat
Akzo Nobel UVR ASNA5113
Low voc UVR AIPS05-02-
440 A-F AIMS04-04-023 IPS04-04-023-02 Aerospace hardener : 90150 - PQ10050-440-00 - - -
varnish. 003
Coatings activator 1 : 99330 PQ10050-440-01
activator 2 : 99321
activator 3 : 99341
activator 4 : 99397

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 60
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
DESOTHANE CLEAR
VARNISH ASNA5113
Low voc UVR AIPS05-02-
440 A-F AIMS04-04-023 IPS04-04-023-01 PPG Aerospace base : CA8001B0900C - PQ10050-440-00 - - -
varnish. 003
hardener : CA8000B PQ10050-440-02
thinner : CA8000C
DESOTHANE CLEAR
VARNISH ASNA5160
Low voc pearles- AIPS05-02-
446 A-F AIMS04-04-023 - PPG Aerospace base : CA8001E.... - PQ10050-446-00 - - A-F
cent varnish 003
hardener : CA8000B PQ10050-446-01
thinner : CA8000C
DESOTHANE
base : 8000C... or
CA8000E
Low voc pearles- PQ10050-446-00 AIPS05-02-
446 A-F AIMS04-04-023 - PPG Aerospace hardener : CA8000B - - - -
cent varnish PQ10050-446-02 003
thinner : CA8000C or
CA8000C1 or
CA8000C2
Akzo Nobel ASNA5160
Low voc pearles- AIPS05-02-
446 A-F AIMS04-04-023 - Aerospace Aviox MICA - PQ10050-446-00 - - -
cent varnish 003
Coatings PQ10050-446-03
DESOTHANE CLEAR
VARNISH
Low voc pearles- ASNA5160 AIPS05-02-
446 A-F ASNA5160 - PPG Aerospace base : CA8001E.... - - - -
cent varnish PQ10050-446-00 003
hardener : CA8000B
thinner : CA8000C
DESOTHANE HS
base : CA8000+PTFE
Low voc anti- PQ10050-480-00 AIPS05-02-
480 A-F - - PPG Aerospace Powder - - - A-F
chafe top coat. PQ10050-480-02 003
hardener : CA8000B
thinner : CA8000C
F565-4010
base : F565-4010 ASNA5145
Intermediate AIPS05-02- Refer to PQ10050
490 A-F AIMS04-04-032 IPS04-04-032-01 PPG Aerospace hardener : F275-189 - PQ10050-490-00 - -
coat. 003 391
thinner : T230 PQ10050-490-01
thinner : T239
AERODUR SEALER
Akzo Nobel 42.240
Intermediate AIPS05-02- Refer to PQ10050
490 A-F AIMS04-04-032 IPS04-04-032-02 Aerospace base : Aerodur sealer - - - -
coat. 003 391
Coatings 42.240
thinner : 98066

CELEROL 990-
base : Celerol 990-09
Intermediate hardener : Celerol 995- AIPS05-02- Refer to PQ10050
490 A-F AIMS04-04-032 IPS04-04-032-03 MANKIEWICZ - - - -
coat. 09 003 391
hardener : Celerol 903-
0909

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 61
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
SEEVENAX CF 113-
44
base : SEEVENAX H/S
113-44
hardener : SEEVENAX
135-44
thinner : SEEVENAX
902-44
CELEROL 990-09
base : Celerol 990-09
hardener : Celerol 995-
Chrome free 09
external paint thinner : Celerol 903- AIPS05-02-
531 - AIMS04-04-037 IPS04-04-037-01 MANKIEWICZ - - - - -
system: P IC BC 09 003
CC ALEXIT 411-22
base : ALEXIT 411-22
hardener : ALEXIT
405-86
thinner : ALEXIT 902-
02
ALEXIT 411-14
base : ALEXIT 411-14
hardener : ALEXIT
405-86
thinner : ALEXIT 901-
72

AVIOX CF PRIMER
37124
base : 356695
hardener : 356834
INTERMEDIATE
COAT AERODUR
SEALER42.240
base : 345891
Chrome free thinner : 345901
Akzo Nobel
external paint Base coat AERO-
531 A-UK AIMS04-04-037 IPS04-04-037-02 Aerospace - - - - - -
system: P IC BC BASE
Coatings
CC base : 371256
hardener : 370637
activator : 370638
Aviox Clearcoat UVR
base : 343359 harde-
ner : 350650 activator 1
: 351697 activator 2 :
350653 activator 3 :
353406 activator 4 :

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 62
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
SEEVENAX CF 113-
44
base : SEEVENAX
113-44
hardener : SEEVENAX
135-44
thinner : SEEVENAX
902-44
Chrome free ALEXIT 411-22
external paint base : ALEXIT 411-22 AIPS05-02-
532 - AIMS04-04-033 IPS04-04-033-01 MANKIEWICZ - - - - -
system: P hardener : ALEXIT 003
BC CC 405-86
thinner : ALEXIT 902-
02
ALEXIT 411-14
base : ALEXIT 411-14
hardener : ALEXIT
405-86
thinner : ALEXIT 901-
72
AVIOX CF PRIMER
37124
base : 356695
hardener : 356834
Base coat AEROBA-
SE
Chrome free base : 371256
Akzo Nobel
external paint hardener : 370637
532 A-UK AIMS04-04-033 IPS04-04-033-02 Aerospace - - - - - -
system: P thinner : 370638
Coatings
BC CC Aviox Clearcoat UVR
base : 343359 harde-
ner : 350650 activator 1
: 351697 activator 2 :
350653 activator
activator 4 : 362941
thinner : 369321
DESOTHANE Matt
Clear Coat
U.V.R varnish 8720M0900C AIPS05-02-
533 - AIMS04-04-023 IPS04-04-023-05 PPG Aerospace - - - - -
matt. base : 8720M0900C 003
hardener : CA 8000B
thinner : CA 8000C2
6 - MARKING INKS, ASSOCIATED VARNISHES, MARKINGS AND ADHESIVE FILMS
Ink to be applied PQ10050-061-00
61 A-F ASN-B70810 - PHILIPS Process N°7 - IPDA28-04 - - -
on internal parts. PQ10050-061-01

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE JCMK - IPDA28-04 - No longer available. A-F
on internal parts. PQ10050-061-02

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE 5101-4 - IPDA28-04 - No longer available. A-F
on internal parts. PQ10050-061-03

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE 7190 - IPDA28-04 - No longer available. A-F
on internal parts. PQ10050-061-04

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE 9510 - IPDA28-04 - - -
on internal parts. PQ10050-061-05

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE 5135 E -4 - IPDA28-04 - - -
on internal parts. PQ10050-061-06

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 63
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Ink to be applied PQ10050-061-00
61 A-F ASN-B70810 - IMAJE 5157 E -4 - IPDA28-04 - - -
on internal parts. PQ10050-061-07

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE 7135 E -6 - IPDA28-04 - - A-F
on internal parts. PQ10050-061-08

Ink to be applied PQ10050-061-00


61 A-F ASN-B70810 - IMAJE 7155 E -6 - IPDA28-04 - - A-F
on internal parts. PQ10050-061-09
INDEPENDANT
Ink to be applied
61 A-F - INK 73 X TYPE INK - PQ10050-061-00 TH6.8020 - -
on internal parts.
CO
JH.MATTHEWS Black Alcosol Ink Type
Ink to be applied
61 SON - - and 1.0036.902.05 or Type - - PS6.3001 - - -
on internal parts.
Co 1.0036.902.08
ORGANIC
Ink to be applied F 150 (white)
61 SON - - PRODUCT - - PS6.3001 - - -
on internal parts. F 100 (black)
COMPANY INK
Ink to be applied Tiflex plastic ink PS
61 SON - - PONCIN - - PS6.3001 - - -
on internal parts. (black)

Ink to be applied Paillard ink


61 SON - - PAILLARD - - PS6.3001 - - -
on internal parts. Type794 (black)

Ink to be applied GUNTHER Pelikan ink


61 SON - - - - PS6.3001 - - -
on internal parts. WAGNER Type18 (white)

Ink to be applied Standard black ink


61 SON - - IMAJE - - PS6.3001 - - -
on internal parts. Type 5101

Ink to be applied PRESTRIDGES


61 A-UK - - PMI WZ 12.644 - ABP9-3323 ABP9-3323 - No longer available A-UK
on internal parts. LTD

Ink to be applied MANDER KIDD WZ 15.313


61 A-UK - - - ABP 9-3323 ABP 9-3323 - - A-UK
on internal parts. LTD WZ 10.080

Ink to be applied PELIKAN DRAWING


61 A-UK - - PELIKAN - ABP9-3323 ABP9-3323 - - A-UK
on internal parts. INK

Ink to be applied ROTRING DRAWING


61 A-UK - - ROTRING - ABP9-3323 ABP9-3323 - - A-UK
on internal parts. INK

Ink to be applied MANDARIN DRAW-


61 A-UK - - MANDARIN - ABP9-3323 ABP9-3323 - - A-UK
on internal parts. ING INK

Ink to be applied PELIKAN INDELIBLE


61 A-E - - PELIKAN - Z-22.923 - - - A-E
on internal parts. INK N°24

Ink to be applied AUTOMATIC


61 A-E A-A208 - JICKN INK - Z-24.919 - - - A-E
on internal parts. MARKING

Ink to be applied EDDING MARKER ABP9-


61 A-UK - - EDDING LIMITED - - - All substrates -
on internal parts. PEN 30 3323ClassA

Ink to be applied EDDING MARKER ABP9-


61 A-UK - - EDDING LIMITED - - - All substrates -
on internal parts. PEN 33 3323ClassA
EDDING AERO-
Ink to be applied ABP9-
61 A-UK - - EDDING LIMITED SPACE MARKER PEN - - - All substrates -
on internal parts. 3323ClassA
8404
INDEPENDANT Not to be used on
Ink to be applied ABP9-
61 A-UK - - INK 73X INK - - - acrylic or -
on internal parts. 3323ClassB
CO polycarbonate

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 64
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
A24 MARK II INK ink : ABP 9-3323 Not to be used on
Ink to be applied SPECIALITY INK
61 A-UK - - A24-1250 - - Class - acrylic or A-UK
on internal parts. CO INC
re activator : A60-1250 B polycarbonate
VIDEOJET Not to be used on
Ink to be applied VIDEOJET 16-2000 ABP9-
61 A-UK - - SYSTEMS - - - acrylic or -
on internal parts. INK 3323ClassB
INTERNATIONAL polycarbonate
VIDEOJET Not to be used on
Ink to be applied VIDEOJET 16-8700 ABP9-
61 A-UK - - SYSTEMS - - - acrylic or -
on internal parts. INK 3323ClassB
INTERNATIONAL polycarbonate
Not to be used on
Ink to be applied ABP9-
61 A-UK - - IMAJE SA IMAJE 9175 INK - - - acrylic or -
on internal parts. 3323ClassB
polycarbonate
Not to be used on
Ink to be applied ABP9-
61 A-UK - - IMAJE SA IMAJE 9155 INK - - - acrylic or -
on internal parts. 3323ClassB
polycarbonate
Not to be used on
acrylic or
Ink to be applied ABP9- polycarbonate
61 A-UK - - IMAJE SA IMAJE 5101 INK - - - -
on internal parts. 3323ClassB Obsolescent - to be
replaced by IMAJE
5157
Not to be used on
acrylic or
Ink to be applied ABP9- polycarbonate
61 A-UK - - IMAJE SA IMAJE 5110 INK - - - -
on internal parts. 3323ClassB Obsolescent - to be
replaced by IMAJE
5506
Not to be used on
Ink to be applied ABP9-
61 A-UK - - IMAJE SA IMAJE 5157 INK - - - acrylic or -
on internal parts. 3323ClassB
polycarbonate
Not to be used on
Ink to be applied ABP9-
61 A-UK - - IMAJE SA IMAJE 5506 INK - - - acrylic or -
on internal parts. 3323ClassB
polycarbonate
Not to be used on
Ink to be applied ABP9-
61 A-UK - - DOMINO UK 138 BK - - - acrylic or -
on internal parts. 3323ClassB
polycarbonate
Not to be used on
acrylic or
Ink to be applied ABP9- polycarbonate.
61 A-UK - - DOMINO UK 262 BK - - - -
on internal parts. 3323ClassB Overcoat not
required. Requires
UV cure
ABP 9-3323 Not to be used on
Ink to be applied DAINIHON ink : JP-K23
61 A-UK - - - - Class - acrylic or -
on internal parts. TORYO thinner : TH-K23
B polycarbonate
Not to be used on
EPOXY BASED ABP 9-3323 acrylic or
Ink to be applied MARKERN
61 A-UK - - WHITE INK - - Class - polycarbonate -
on internal parts. CORPORATION
SERIES 7904 B Overcoating not
required.
SANFORD SHARPIE ABP 9-3323 Not to be used on
Ink to be applied
61 A-UK - - SANFORD CO PERMANENT MARK- - - Class - acrylic or -
on internal parts.
ING PEN 13601 B polycarbonate
SANFORD SHARPIE
ABP 9-3323 Not to be used on
Ink to be applied PERMANENT
61 A-UK - - SANFORD CO - - Class - acrylic or -
on internal parts. MARKING PEN
B polycarbonate
13801
Ink to be applied TINTALITE F.65220 ABP9- Used on acrylic or
61 A-UK - - MACDERMID - - - -
on internal parts. BLUE 3323ClassC polycarbonate only

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 65
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Ink to be applied MANDER KIDD PQ10050-063-00
63 A-F - - WZ 12.644 - - - - A-F
before painting. LTD PQ10050-063-01

Ink to be applied PRESTRIDGES


63 A-UK - - PMI WZ 12.644 - ABP9-3322 ABP9-3322 - No longer available A-UK
before painting. LTD

Ink to be applied PELIKAN INDELIBLE


63 A-E - - PELIKAN - Z-22.923 - - - A-E
before painting. INK N°24

Ink to be applied AUTOMATIC


63 A-E A-A 208 - JICKN INK - Z-24.919 - - - A-E
before painting. MARKING
Akzo Nobel
Ink to be applied Aerospace PQ10050-065-00
65 A-F - - 7 G 800 - - - - A-F
on silicone paint. Coatings PQ10050-065-01
/ France
Akzo Nobel
Ink to be applied Aerospace
65 A-E - - 7 G 800 - - - - - A-E
on silicone paint. Coatings
/ France
ASNA3685
Marking ink for
68 A-F ASN-B-70820-SP - TIFLEX XD 150 - PQ10050-068-00 IPDA28-05 - - A-F
serigraphy.
PQ10050-068-01
JH.MATTHEWS
Marking ink for Black Alcosol Ink
68 SON - - and - - PS6.3001 - - SON
serigraphy. type TTE.14224
Co
Black Videojet Marking
Marking ink for
68 SON - - VIDEOJET Ink N°16.4200 or - - PS6.3001 - - -
serigraphy.
N°16.7200
PQ10050-069-00
69 A-F Activated Decals ASN-B70830-SP - BSB France S.A. Durofix - IPDA28-05 - - -
PQ10050-069-01

AIMS04-16-001 PQ10050-069-00
69 A-F Activated Decals IPS04-16-001-03 ADHETEC Adhetrans TYPE X - IPDA28-05 - - A-F
ASN-B70830-SP PQ10050-069-02

PQ10050-069-00
69 A-F Activated Decals ASN-B70830-SP - DISA Suprafix-FRS - IPDA28-05 - - -
PQ10050-069-03

Ink for serigra-


69 A-D - - PPG Aerospace Wiedosil Z - 80-T-39-1028 80-T-39-1028 - - -
phy.
Type silk screen
Ink for serigra- NAZ-DAR process colour
79 SON - - - - PS6.3001 - - SON
phy. CHICAGO Serie 59.000
solvent : BT10441S

79 A-D Marking Ink. - - PELIKAN B 158/1273 blue - 80-T-39-0132 80-T-39-0132 - No longer available -

81 A-D Marking Ink. - - BISON Ink 36 - 80-T-39-0132 80-T-39-0132 - No longer available -

Marking ink for


81 A-D - - Wiedenbach W 52 - 100/K1 black - 80-T-39-0132 80-T-39-0132 - - -
ink jet
ink : Alpha Jet
Marking ink for HI1A5AS0
81 A-D - - Metronic AG - 80-T-39-0132 80-T-39-0132 - -
ink jet solvent : HI2H1A00 or
HIAA00
Marking ink for Beschriftungstech- Alpha Jet
81 A-D - - - 80-T-39-0132 80-T-39-0132 - - -
ink jet nik Frank Gärtner ink : BT10441

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 66
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Marking ink for ink : BK0101
81 A-D - - Chromos - 80-T-39-0132 80-T-39-0132 - - -
ink jet base : 0121 Make up

Marking ink for Bluhm Systeme ink : Fast Dry 1240


81 A-D - - - 80-T-39-0132 80-T-39-0132 - - -
ink jet Gmbh solvent : 1512

Pelikan stamping
81 A-D Stamping ink - - PELIKAN - 80-T-39-0132 80-T-39-0132 - - -
ink : 84
Paint marker edding
Marker for
81 A-D - - Edding AG 750 (white) or 751 - 80-T-39-0132 80-T-39-0132 - - -
manual marking
(silver) or 780 (gold)
For identification of
Marker for
81 A-D - - Edding AG Edding 3000 - 80-T-39-0132 80-T-39-0132 - semi-finished -
manual marking
products only
Stabilo-OH Pen
Marker for 841 (0,4 mm) or 842
81 A-D - - Schwan-Stabilo - 80-T-39-0132 80-T-39-0132 - - -
manual marking (0,7 mm) or 843 (1,0
mm)
White ink for PQ10050-200-00
81 A-F ASN-B-70820-SP - TIFLEX MAT ES 5600 - - - - A-F
serigraphy. PQ10050-200-01
Ink for serigra-
PQ10050-510-00
510 A-F phy.Cokpit - - SERICOL POLYPLAST PY - - - - -
PQ10050-510-01
application.
Fluorescent ink
for serigraphy. Plastipure fluorescent PQ10050-511-00
511 A-F - - SERICOL - - - - -
Cokpit applica- FP PQ10050-511-01
tion.
Marking Ink for
512 A-F ASN-B70810-SP - STAEDLER STAEDLER 311 - - IPDA28-04 - - -
felt.

Marking Ink for


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 312 - - IPDA28-04 - - -
felt.

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 313 - IPDA28-04 - - -
felt. PQ10050-512-01

Marking Ink for


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 315 - - IPDA28-04 - - -
felt.

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 316 - IPDA28-04 - - -
felt. PQ10050-512-02

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 317 - IPDA28-04 - - -
felt. PQ10050-512-03

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 318 - IPDA28-04 - - -
felt. PQ10050-512-04

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - STAEDLER STAEDLER 352 - IPDA28-04 - - -
felt. PQ10050-512-05

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - UNI PROCKEY PM 122 - IPDA28-04 - - -
felt. PQ10050-512-06

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - PENTEL PEN 50 - IPDA28-04 - - -
felt. PQ10050-512-07

Marking Ink for PQ10050-512-00


512 A-F ASN-B70810-SP - PENTEL PEN 100 WS - IPDA28-04 - - -
felt. PQ10050-512-08

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 67
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Marking Ink for PQ10050-512-00
512 A-F ASN-B70810-SP - UNI PAINT PX 20 - IPDA28-04 - - -
felt. PQ10050-512-09

Marking by dry PQ10050-515-00


515 A-F AIMS04-16-001 IPS04-16-001-03 ADHETEC Adhetrans TYPE X - IPDA28-05 - - A-F
transfer. PQ10050-515-01

Marking by dry ADHETRANS TYPE PQ10050-515-00


515 A-F AIMS04-16-001 IPS04-16-001-03 ADHETEC - IPDA28-05 - - A-F
transfer. X+ PQ10050-515-02

Marking by dry PQ10050-515-00


515 A-F AIMS04-16-001 IPS04-16-001-03 TIP Trans tip 2AA - IPDA28-05 - - A-F
transfer. PQ10050-515-03

Marking by dry PQ10050-515-00


515 A-F AIMS04-16-001 - DISA FLYTAC - IPDA28-05 - - A-F
transfer. PQ10050-515-04

Marking by dry PQ10050-515-00


515 A-F AIMS04-16-001 IPS04-16-001-02 DISA FLYTAC II - IPDA28-05 - - A-F
transfer. PQ10050-515-05

Marking by dry PQ10050-515-00


515 A-F AIMS04-16-001 IPS04-16-001-03 ADHETEC ADHETRANS TYPE X - IPDA28-05 - - A-F
transfer. PQ10050-515-06

Marking by dry AIPS08-02-


515 A-F AIMS04-16-001 IPS04-16-001-01 TIP Trans tip 2AA - AIPS08-02-005 - - -
transfer. 005

Marking by dry AIPS08-02-


515 A-F AIMS04-16-001 IPS04-16-001-02 DISA FLYTAC II - AIPS08-02-005 - - -
transfer. 005

Marking by dry AIPS08-02-


515 A-F AIMS04-16-001 IPS04-16-001-03 ADHETEC ADHETRANS TYPE X - AIPS08-02-005 - - -
transfer. 005
Akzo Nobel
Varnish for Aerospace
520 A-UK - - Aerodur UVR clearcoat - - ABP4-2128 - - -
internal marking Coatings
/ Netherland
Varnish for Desothane HS Clear
520 A-UK - - PPG Aerospace - - ABP4-2128 - - -
internal marking Varnish

Varnish for
520 A-UK - - PPG Aerospace CV116 - - ABP4-2128 - - -
internal marking
Akzo Nobel
Varnish for Aerospace
520 SON - - Aerodur UVR clearcoat - - PS6.3001.01 - - -
internal marking Coatings
/ Netherland
Varnish for
520 SON - - 3M EC 776 - - PS6.3001.01 - - -
internal marking

Varnish for CONTAKT


520 SON - - Plastik K 70 - - PS6.3001.01 - - -
internal marking CHEMIE
Silicone Varnish
521 A-F for internal - - PROMECOME Elastosil wacker E43 - - - - - -
marking
Marking by PQ10050-522-00 AIPS08-02-
522 A-F AIMS04-16-002 IPS04-16-002-01 ADHETEC Adhemark 13880 - - - -
adhesive film PQ10050-522-01 005

Marking by PQ10050-522-00 AIPS08-02-


522 A-F AIMS04-16-002 IPS04-16-002-02 DISATECH - - - -
adhesive film PQ10050-522-02 005

Adhesive Film of AIPS05-06-


523 A-F ASNA5162 - 3M VS7704 - ASNA5162A01 - - -
Decoration 001

Adhesive Film of AIPS05-06-


523 A-F ASNA5162 - ADHETEC VS7704 - ASNA5162A01 - - -
Decoration 001

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 68
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Adhesive Film of AIPS05-06-
523 A-F ASNA5164 - ADHETEC Avery 7910 - ASNA5164A01 - - -
Decoration 001

Adhesive Film of AIPS05-06-


523 A-F ASNA5165 - 3M VS7322 - ASNA5165A01 - - -
Decoration 001
AIPS05-02-19
Adhesive Film of
523 A-F AIMS10-13-004 IPS10-13-004-01 ADHETEC - ASNA5164 AIPS05-06- - - -
Decoration
001
7 - PROTECTIVE PRODUCTS
Protective paint No longer available.
base : F580-2034
for electrical rack PPG Aerospace / PQ10050-037-00 Replaced by
37 A-F - - hardener : F275-32 - - - A-F
and UK PQ10050-037-01 PQ10050-002-00 +
thinner : 850-861
panels. PQ10050-003-00.
To be replaced by PQ 10050-530-00
AIPS02-04-
Water repellent PQ10050-049-00 except for movable parts or specfic
49 A-F AIMS09-08-001 IPS09-08-001-01 CHEMETALL Ardrox AV 8 - 001 - -
fluid. PQ10050-049-01 airline request refer to PQ 10050-
IPDA 64-12
049-05
AIPS02-04- To be replaced by PQ 10050-530-00
Water repellent LPS Research PQ10050-049-00
49 A-F AIMS09-08-001 IPS09-08-001-04 LPS 3 - 001 - except for movable parts or specfic -
fluid. Laboratories PQ10050-049-02
IPDA64-12 airline request
AIPS02-04- To be replaced by PQ 10050-530-00
Water repellent PQ10050-049-00
49 A-F AIMS09-08-001 IPS09-08-001-03 SOCOMOR SOCOPAC 25 H - 001 - except for movable parts or specfic -
fluid. PQ10050-049-03
IPDA64-12 airline request
AIPS02-04- To be replaced by PQ 10050-530-00
Water repellent PQ10050-049-00
49 A-F AIMS09-08-001 - CHEMETALL Ardrox 3402 - 001 - except for movable parts or specfic A-F
fluid. PQ10050-049-04
IPDA64-12 airline request
AIPS02-04-
Water repellent PQ10050-049-00
49 A-F AIMS09-08-001 IPS09-08-001-02 CHEMETALL Ardrox AV 25 - 001 - - -
fluid. PQ10050-049-05
IPDA64-12
AIMS09-08-001
Water repellent - LPS Research
49 A-E TNA00710138 LPS 3 - Z-11.502 - - - -
fluid. IPS09-08-001-04 Laboratories
Type I grade 2
Water repellent TNA00710138
49 A-E - CHEMETALL 396/1 - Z-11.502 - - - A-E
fluid. Type I grade 2

Water repellent TNA00710138


49 A-E - CHEMETALL Ardrox 3210 - Z-11.502 - - - -
fluid. Type I grade 2

Water repellent TNA00710138


49 A-E - CHEMETALL Ardrox 3402 - Z-11.504 - - - -
fluid. Type I grade 3

Water repellent AIPS02-04-


49 A-E AIMS09-08-001 IPS09-08-001-01 CHEMETALL Ardrox AV 8 - Z-11.504 - - -
fluid. 001

Water repellent AIPS02-04-


49 A-E AIMS09-08-001 IPS09-08-001-02 CHEMETALL Ardrox AV 25 - Z-11.502 - - -
fluid. 001

Water repellent
49 A-D 4.653.40 - LAB. AGIR S.A. WD 40 - TNA00710003MT1 29 80-T-35-9799 - - A-D
fluid.

Water repellent LPS Research


49 A-D AIMS09-08-001 IPS09-08-001-04 LPS 3 - TNA00710003M 80-T-35-9799 - - -
fluid. Laboratories

Water repellent
49 A-D AIMS09-08-001 IPS09-08-001-01 CHEMETALL Ardrox AV 8 - TNA00710003M 80-T-35-9799 - Type 1 grade 2 -
fluid.

Water repellent
49 A-D AIMS09-08-001 IPS09-08-001-02 CHEMETALL Ardrox AV 25 - TNA00710003M 80-T-35-9799 - - -
fluid.

Water repellent Do not apply on


49 - AIMS09-08-001 - SOCOMOR WADIS 24 - - - - -
fluid. Inox

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 69
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Water repellent
49 - AIMS09-08-001 IPS09-08-001-05 SOCOMOR Socopac 25S - - - - - -
fluid.

Water repellent
49 - AIMS09-08-001 - CHEMETALL Ardrox 3966 - - - - - -
fluid.

Water repellent
49 - AIMS09-08-001 - SPCA Protex PE 641 - - - - - -
fluid.

Water repellent
49 - AIMS09-08-001 - SPCA Protex PE 645 - - - - - -
fluid.

Water repellent
49 - AIMS09-08-001 - CHEMETALL Ardrox 3210 - - - - - -
fluid.
AIPS02-04- To be replaced by PQ 10050-530-00
Water repellent TNA007.10138 PQ10050-049-00
49 A-F - CHEMETALL Ardrox 3402 - 001 - except for movable parts or specfic -
fluid. Type I Grade 3 PQ10050-049-04
IPDA64-12 airline request
Water repellent Do not apply on
49 - TNA007.10138 - SOCOMOR WADIS 24 - - - - -
fluid. Inox

Water repellent
49 - TNA007.10138 - CHEMETALL Ardrox 3966 - - - - - -
fluid.

Water repellent
49 - TNA007.10138 - SPCA Protex PE 641 - - - - - -
fluid.

Water repellent
49 - TNA007.10138 - SPCA Protex PE 645 - - - - - -
fluid.

Water repellent
49 - TNA007.10138 - CHEMETALL Ardrox 3210 - - - - - -
fluid.

Water repellent LPS Research PQ10050-050-00 Replaced by


50 A-F - - LPS 3 - - - A-F
fluid. Laboratories PQ10050-050-01 PQ10050-049-00.
Replaced by
Water repellent PQ10050-050-00 PQ10050-049-
50 A-F - - SOCOMOR WADIS 24 - - - A-F
fluid. PQ10050-050-02 00.Do not apply on
Inox
Water repellent PQ10050-050-00 Replaced by
50 A-F - - CHEMETALL 396/1 - - - A-F
fluid. PQ10050-050-03 PQ10050-049-00.

Water repellent PQ10050-050-00 Replaced by


50 A-F - - LAB. AGIR S.A. WD 40 - - - A-F
fluid. PQ10050-050-04 PQ10050-049-00.

Water repellent VALVOLINE OIL PQ10050-050-00 Replaced by


50 A-F - - TECTYL 846 - - - A-F
fluid. C.O. PQ10050-050-05 PQ10050-049-00.

Water repellent PQ10050-050-00 Replaced by


50 A-F - - FARKAS S.A BOESCHIELD T9 - - - A-F
fluid. PQ10050-050-06 PQ10050-049-00.
Protection
product (flight VALVOLINE OIL PQ10050-051-00
51 A-F MIL-C-16173 - Tectyl 502C - - - - A-F
control C.O. PQ10050-051-01
cables, ...)
Protection
product (flight VALVOLINE OIL
51 A-D MIL-C-16173 - Tectyl 502C - 80-T-35-5701 80-T-35-5701 - - -
control C.O.
cables, ...)
Protection
product (flight VALVOLINE OIL
51 A-E MIL-PRF-16173 - Tectyl 502C - Z-11.102 - - - A-E
control C.O.
cables, ...)

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 70
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Protection
product (flight DTD5609 Shell Aeroshell Grease
51 A-UK - SHELL - DTD 5609 - - - -
control MIL-G-25537 14
cables, ...)
Protection
product (flight MIL.C.16173 grade VALVOLINE OIL
51 SON - Tectyl 502C - - PS6.3074 - - -
control 2 C.O.
cables, ...)
Protective
CYANAMID
varnish for PQ10050-052-00
52 A-F - - Canada BR 227 - - - - -
metallic PQ10050-052-01
Inc.
honeycomb.
Protective
CYANAMID
varnish for
52 A-E - - Canada BR 227 - Z-15.913 - - - A-E
metallic
Inc.
honeycomb.
Protective
product for PQ10050-058-00 AIPS02-04- Replaced by
58 A-F - - CHEMETALL Ardrox 3302 - - -
unpainted steel PQ10050-058-01 001 PQ10050-090-00.
parts.
Protective
product for
58 A-D 4.653.99 - CHEMETALL Ardrox 3302 - TNA00710003MT1 28 80-T-35-9799 - - A-D
unpainted steel
parts.
Protective
product for AIPS02.04.00 See QPL TN
58 A-UK - - CHEMETALL Ardrox 3302 - - - A-UK
unpainted steel 1 A00710138
parts.
Protective
product for AIPS02.04.00
58 A-E - - CHEMETALL Ardrox 3302 - Z-11.204 - - A-E
unpainted steel 1
parts.
Protective
product for
58 SON MIL-C-16173 - CHEMETALL Ardrox 3302 - - PS6.5102 - - SON
unpainted steel
parts.
Protective
product for MIL-C-16173 grade VALVOLINE OIL
58 SON - Tectyl 894 - - PS6.3074 - - -
unpainted steel 3 C.O.
parts.
Protective
product for MIL-C-16173 grade
58 SON - SHELL ROYCO 153 R - - PS6.3074 - - -
unpainted steel 3
parts.
Protective
product for MIL-C-16173 grade
58 SON - TURCO 5442 WD - - PS6.3074 - - -
unpainted steel 3
parts.
Protective AIPS02-04-
PQ10050-090-00 To be replaced by PQ 10050-530-00
90 A-F product for AIMS09-08-002 IPS09-08-002-01 CHEMETALL Ardrox AV 30 - 001 - -
PQ10050-090-01 except for specific airline request
unpainted steel. IPDA64-12
Protective AIMS09-08-002 AIPS02-04-
PQ10050-090-00 To be replaced by PQ 10050-530-00
90 A-F product for TNA00710138 IPS09-08-002-02 SOCOMOR SOCOPAC 50 S - 001 - -
PQ10050-090-02 except for specific airline request
unpainted steel. Type II grade 1 IPDA64-12
Protective AIPS02-04-
TNA00710138 PQ10050-090-00 To be replaced by PQ 10050-530-00
90 A-F product for - CHEMETALL Ardrox 3313 - 001 - -
Type II grade 2 PQ10050-090-03 except for specific airline request
unpainted steel. IPDA64-12
Protective AIPS02-04-
PQ10050-090-00 To be replaced by PQ 10050-530-00
90 A-F product for AIMS09-08-001 IPS09-08-001-02 CHEMETALL Ardrox AV 25 - 001 - -
PQ10050-090-04 except for specific airline request
unpainted steel. IPDA64-12

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 71
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Protective
TNA00710003MT1/T2
90 A-D product for AIMS09-08-002 IPS09-08-002-01 CHEMETALL Ardrox AV 30 - 80-T-35-9799 - - -
28,29
unpainted steel.
Protective
90 A-D product for TNA00710138 - CHEMETALL Ardrox AV 100D - TNA00710003MT1/T2 80-T-35-9799 - REPLACED -
unpainted steel.
Protective
AIPS02-04-
90 A-E product for AIMS09-08-002 IPS09-08-002-01 CHEMETALL Ardrox AV 30 - Z-11.505 - - -
001
unpainted steel.
Protective AIMS09-08-002
-
90 A-E product for TNA00710138 CHEMETALL Ardrox AV 100D - Z-11.501 - - - -
IPS09-08-002-03
unpainted steel. Type II grade 2
Protective AIMS09-08-002
PQ10050-090-05 AIPS02-04-
90 A-F product for TNA00710138 IPS09-08-002-03 CHEMETALL Ardrox AV 100D - - - A-F
Z-11.501 001
unpainted steel. Type II grade 2
Protective
TNA00710138
90 A-E product for - CHEMETALL Ardrox 3403 - Z-11.501 - - - -
Type II grade 2
unpainted steel.
Protective
TNA00710138 LPS Research
90 A-E product for - LPS-B 1007 - Z-11.501 - - No longer available A-E
Type II grade 2 Laboratories
unpainted steel.
Protective
product for TNA00710138 LPS Research
90 - - LPS-B 997 - - - - - -
unpainted steel (Type II grade 1) Laboratories
parts.
Protective
product for TNA00710138 LPS Research
90 - - Procyon AB - - - - No longer available -
unpainted steel (Type II grade 2) Laboratories
parts.
Protective
product for TNA00710138
90 - - SOCOMOR Socopac 50H - - - - - -
unpainted steel (Type II grade 2)
parts.
Protective
product for TNA00710138
90 - - CHEMETALL Ardrox 3209 - - - - - -
unpainted steel (Type II grade 1)
parts.
Protective
product for TNA00710138
90 - - SPCA Protex PE 647 - - - - - -
unpainted steel (Type II grade 1)
parts.
Protective
product for TNA00710138
90 - - SPCA Protex PE 649 - - - - - -
unpainted steel (Type II grade 1)
parts.
Protective
PQ10050-090-05 AIPS02-04-
90 A-F product for AIMS09-08-002 IPS09-08-002-03 CHEMETALL Ardrox AV 100D - - - -
Z-11.501 001
unpainted steel.
Protective
PQ10050-105-00
105 A-F varnish for - - SAINT GOBAIN SPS 123 - - - - -
PQ10050-105-01
polycarbonate.
Temporary
PPG Aerospace / PQ10050-112-00
112 A-F protection AIMS04-04-015 - 8340/2320 - IPDA64-18 - - A-F
France PQ10050-112-01
product.
Temporary
PQ10050-112-00
112 A-F protection AIMS04-04-015 - SOCOMOR Propaco SC - IPDA64-18 - - A-F
PQ10050-112-02
product.
Temporary
112 A-D protection AIMS04-04-015 - SOCOMOR Propaco SC - - 80-T-35-9127 - - A-D
product.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 72
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Temporary
MIL.C.16173 grade Aeroshell compound
112 SON protection - SHELL - - PS6.3074 - - SON
2 02
product.
Temporary
PPG Aerospace / PQ10050-112-00
112 A-F protection - - 8340/2320 - IPDA64-18 - - -
France PQ10050-112-01
product.
Temporary
PQ10050-112-00
112 A-F protection - - SOCOMOR Propaco SC - IPDA64-18 - - -
PQ10050-112-02
product.
Temporary
112 A-D protection - - SOCOMOR Propaco SC - - 80-T-35-9127 - -
product.
Water repellent AIPS02-04- to be used when
PQ10050-530-04
529 A-UK and corrosion AIMS09-08-003 IPS09-08-003-04 ZIP-CHEM Cor-Ban 35 - 001 - specific airline A-UK
TNA00710138
inhibitor IPDA 64-12 request
Water repellent AIPS02-04- to be used when
529 A-UK and corrosion AIMS09-08-003 IPS09-08-003-04 ZIP-CHEM Cor-Ban 35 - - 001 - specific airline -
inhibitor IPDA64-12 request
No longer to be
Water repellent used as a type III
TNA00710003MT2
530 A-D and corrosion AIMS09-08-002 IPS09-08-002-01 CHEMETALL Ardrox AV 30 - 80-T-35-9799 - product. To be -
28,29
inhibitor replaced by
ARDROX AV 15
Water repellent AIPS02-04- No longer to be used as a type III
AIMS09-08-002 IPS09-08-002-01 PQ10050-530-00
530 A-F and corrosion CHEMETALL Ardrox AV 30 - 001 - product. To be replaced by PQ -
AIMS09-08-003 IPS09-08-003-02 PQ10050-530-01
inhibitor IPDA64-12 10050-530-03
Water repellent AIPS02-04-
PQ10050-530-00
530 A-F and corrosion AIMS09-08-003 IPS09-08-003-01 SOCOMOR SOCOPAC 65H - 001 - - -
PQ10050-530-02
inhibitor IPDA64-12
Water repellent AIPS02-04-
PQ10050-530-00
530 A-F and corrosion AIMS09-08-003 IPS09-08-003-03 CHEMETALL ARDROX AV 15 - 001 - - -
PQ10050-530-03
inhibitor IPDA64-12
Water repellent
80-T-35-9799
530 A-D and corrosion AIMS09-08-003 IPS09-08-003-01 SOCOMOR SOCOPAC 65H - TNA00710003M - - -
IPDA 64-12
inhibitor
Water repellent
80-T-35-9799
530 A-D and corrosion AIMS09-08-003 IPS09-08-003-03 CHEMETALL ARDROX AV 15 - TNA00710003M - - -
IPDA64-12
inhibitor
Clear Polyurethane
Synthetic Akzo Nobel
Topcoat 683-3-2
hydraulic fluid Aerospace
539 A-E AIMS04-04-052 IPS04-04-052-01 base : 683-3-2 - - - - - -
resistant Coatings
catalyst : X-310A
varnish / Netherland
thinner : TL-59
Improved
durability
540 A-D corrosion AIMS09-08-004 IPS09-08-004-01 CHEMETALL Ardrox AV 35D - - - - - -
prevention
compounds
8 - SEALANTS

Anti corrosion
removable No skydrol
polyester PPG Aerospace / PQ10050-042-00 resistance. Ref
42 A-F - ASNA4188 Mastinox 6856 K - IPDA77-01 - -
sealant with zinc France PQ10050-042-02 transferred to
chromate PQ10010-141-00.
T<=130°C.

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 73
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Anti corrosion
removable No skydrol
polyester PPG Aerospace / Mastinox PQ10050-042-00 resistance. Ref
42 A-F - ASNA4191 - IPDA77-01 - -
sealant with zinc France 1975/3600 or lab 1692 PQ10050-042-01 transferred to
chromate PQ10010-141-00.
T<=130°C.
Anti corrosion
removable
polyester PPG Aerospace / Ref transferredto
42 A-E MIL-P-8116 - Mastinox 6856 K - Z-11903 I+D-P-146 - -
sealant with zinc France PQ10010-141-00
chromate
T<=130°C.
Anti corrosion
removable
polyester Ref transferred to
42 A-D WLB5.7070 - PPG Aerospace Mastinox 6856 K - TNA00710003MT1 30 80-T-35-5903 - -
sealant with zinc PQ10010-141-00
chromate
T<=130°C.
Anti corrosion
removable
polyester PPG Aerospace / DTD 900/4488 obsolete Ref trans-
42 A-UK DTD900/4488 - JC 5 A - ABP 4-5144 ABP 4-5144 - -
sealant with zinc UK ferred to PQ10010-141-00
chromate
T<=130°C.
Anti corrosion
removable
polyester
42 A-UK DTD900/4549 - PPG Aerospace CELOSEEL QH - ABP 4-5145 ABP 4-5145 - - A-UK
sealant with zinc
chromate
T<=130°C.
Anti corrosion
removable
polyester CELOSEEL DTD 369
42 A-UK DTD900/4549 - PPG Aerospace - ABP 4-5145 ABP 4-5145 - Obsolete A-UK
sealant with zinc A
chromate
T<=130°C.
Anti corrosion
removable
polyester PPG Aerospace / DTD 900/4971 obsolete.Ref trans-
42 A-UK DTD900/4971 - Mastinox 6856 K - ABP 4-5145 ABP 4-5145 - -
sealant with zinc France ferred to PQ10010-141-00
chromate
T<=130°C.
Anti erosion
removable
43 A-D WLB5.7070 - PPG Aerospace N 53.622 - 80-T-35-5403 80-T-35-5903 - No longer available A-D
sealant
T<=170°C.
Silicone grease No longer available See PQ 10010-
PPG Aerospace / PQ10050-044-00
44 A-F with chromates - ASNA4189 Mastinox D 40 - IPDA 77-01 - 143 A-F
France PQ10050-044-01
T<=150°C. 00
Silicone grease
PQ10050-044-00
44 A-F with chromates - - SPCA CZ-G - - - - A-F
PQ10050-044-02
T<=150°C.
Silicone grease
44 A-D with chromates - - PPG Aerospace Mastinox D 40 - - 80-T-35-5903 - No longer available A-D
T<=150°C.
Akzo Nobel base : Jointing com-
Epoxy resin Aerospace pound S15 K90
45 A-F - - - PQ10050-045-00 TH6.6554 - - -
skydrol resistant. Coatings hardener : Aerokote
/ Netherland S30/25

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 74
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050
No
Standard or Inidividual Product Process Equivalent or longer
Ref Natco Material Manufacturer Product Designation. EHS Status Drawing Designation COMMENTS
Specification Specification Specification Substitute to be
used
Buna varnish PQ10050-057-00
57 A-F - - Le Joint Français PR1005 CH - IPDA 77-01 - - -
with chromates. PQ10050-057-01

Buna varnish PPG Aerospace /


57 A-UK - - PR1005 CH - ABP 4-5141 ABP 4-5141 - - A-UK
with chromates. USA
Sealant Protec-
59 A-D tion. Buna MIL-S-4383 - Le Joint Français PR1005 L - 80-T-34-9600 80-T-34-9600 - - -
varnish.
Sealant Protec-
59 A-F tion. Buna - - Le Joint Français PR1005 L - PQ10050-059-00 TH6.6542 - - -
varnish.
Sealant Protec-
59 A-E tion. Buna MIL-S-4383 - Le Joint Français PR1005 L - Z-16.201 I+D-P-146 - - A-E
varnish.
Sealants -
541 A-D AIMS04-05-001 IPS04-05-001-15 CHEMETALL Naftoseal MC770 B - - - - - -
General purpose
Sealants -
542 A-E Electrical AIMS04-05-010 IPS04-05-010-01 Le Joint Français PR 1764 MB 2 - - - - - -
conductive

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 75
Feb 01/14
Printed in Germany
PROCESS AND MATERIAL SPECIFICATION
AIRBUS A00710050

RECORD OF REVISIONS

Clause
Issue Description of modification
modified

BA
All Document totally reworked
02/11

BB
All Document totally reworked
08/12

TN.A.007 10050
02-05-00
Issue BB August 2012 Page 76
Feb 01/14
Printed in Germany

You might also like