Professional Documents
Culture Documents
id=150
8 +24VDC -
9 Bezel Lamp – Switched +24VDC O
10 FGND -
11 RS232 RXD I
12 RS232 TXD O
13 DTR O
14 RTS O
Default Communication Settings
The RS-232C interface default configuration settings are:
Baud Rate: 9600 BPS
Data Bits: 8 Bits
Parity: None
Stop Bits: 1
Handshaking: XON/XOF
Receive Error: Prints
Input Buffer 8,192 bytes
These communications settings may be altered only through the use of the CONFIG program, special printer
configuration software available from TransAct. Contact TransAct Technical Support for further information
on this utility.
https://www.transact-tech.com/support-info.php?id=150 1/6
23/4/22, 16:55 https://www.transact-tech.com/support-info.php?id=150
USB Communications Interface PCB
The USB Communications PCB contains two connectors.
Power - 4 position Molex Minifit Jr®., part number 39-30-1040, which mates with Molex
The NETPLEX Communications interface connector is a 10 position Molex Minifit Jr®., part number 39-30-1100,
https://www.transact-tech.com/support-info.php?id=150 2/6
23/4/22, 16:55 https://www.transact-tech.com/support-info.php?id=150
The Universal USB/NETPLEX interface supports both USB and NETPLEX communications.
Power - 4 position Molex Minifit Jr®., part number 39-30-1040, which mates with Molex
NETPLEX communications- 6 position Molex Minifit Jr®., part number 39-30-1060, which mates with
https://www.transact-tech.com/support-info.php?id=150 3/6
23/4/22, 16:55 https://www.transact-tech.com/support-info.php?id=150
NETPLEX Connector
Pin # FUNCTION
1 MRESET (Active low) I
2 RXD I
3 +12 VDC I
4 TXD O
5 SGND -
6 Bezel Lamp – Switched +24VDC O
Table 4. Universal USB/NETPLEX Communication PCB Pin-Outs
NETPLEX Communications. - 10 position Molex Minifit Jr®., part number 39-30-1100 for NETPLEX
I2C Communications - 2 modular RJH connections The connectors are electrically connected to allow daisy
https://www.transact-tech.com/support-info.php?id=150 4/6
23/4/22, 16:55 https://www.transact-tech.com/support-info.php?id=150
Table 5. Dual Port NELTPLEX Communication PCB Pin-Outs
RS232 Communications14 position Molex Minifit Jr®., part number 39-30-1140 which mates with Molex
I2C Communications -2 two modular RJH connections for a secondary I2C port. The two modular connectors
https://www.transact-tech.com/support-info.php?id=150 6/6