You are on page 1of 8

4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

** ON A/C FSN 201-250, 501-510, 512-600, 702-750


TASK 71-13-41-210-801-A
Visual Inspection of the Fan Cowl Doors
FIN: 5110EA 5120EA
1. Reason for the Job
Self explanatory

2. Job Set-up Information

A. Fixtures, Tools, Test and Support Equipment

REFERENCE QTY DESIGNATION


No specific AR ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific AR SAFETY CLIP - CIRCUIT BREAKER

B. Consumable Materials

REFERENCE DESIGNATION
C10-210 Aerodynamic tape 3M type 425

C. Work Zones and Access Panels

ZONE/ACCESS ZONE DESCRIPTION


811

D. Referenced Information

REFERENCE DESIGNATION
Ref. 24-42-00-861-801-A Energize the Ground Service Network
Ref. 24-42-00-862-801-A De-energize the Ground Service Network
Ref. 71-13-44-200-801-A Check of the Pressure-Relief Door Latches on the Fan Cowl
Ref. SRM 54-20-00
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

1/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

REFERENCE DESIGNATION
Ref. Fig. Fan Cowl Door

3. Job Set-up
SUBTASK 71-13-41-861-053-A
A. Energize the ground service network
Ref. AMM TASK 24-42-00-861-801.
SUBTASK 71-13-41-941-053-A
B. Safety Precautions
(1) Make sure that the engine 1, (2) shutdown occurred not less than 5 minutes before you do this procedure.

SUBTASK 71-13-41-010-054-A
C. Get access to the avionics compartment.
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the access door 811.
(2) Open the access door 811.
(3) Open the protective door of the AC/DC emergency power-center 740VU.

SUBTASK 71-13-41-865-057-A
D. Open, safety and tag this(these) circuit breaker(s):

PANEL DESIGNATION FIN LOCATION


FOR FIN 4030EM1(DEMOUNTABLE POWER PLANT, ENG1)
722VU FADEC B ENG 1 13KS1 D44
742VU FADEC A ENG 1 12KS1 Q73
FOR FIN 4030EM2(DEMOUNTABLE POWER PLANT, ENG2)
722VU FADEC B ENG 2 13KS2 K49
742VU FADEC A ENG 2 12KS2 Q74

4. Procedure
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

2/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

Ref. Fig. Fan Cowl Door


SUBTASK 71-13-41-220-050-A
A. Do a visual inspection of the fan-cowl door as follows
Ref. Fig. Fan Cowl Door

LOCATION DESCRIPTION
D1 Area 5.0 in. (127 mm) or less from hinge or latch fittings.
D2 Top and bottom edges of fan-cowl door.
D3 Area 3.0 in. (76.2 mm) or less from pressure-relief door
or hold-open rod.
D4 The main body of the door which is full depth of sandwich
panel.

© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

3/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

INSPECT/CHECK MAXIMUM SERVICEABLE LIMITS REMARK


1.Location D1
A.Abrasion Abrasion damage is allowed to surface finish o Apply Aerodynamic tape 3M type 425 (Material R
nly. Fibers must not be damaged. ef. C10-210). Examine the tape at "A" check. Rep
lace tape if loose.
B.Scratch/Gouge The minimum limits for depth is 0.010 in. (0.2 Apply Aerodynamic tape 3M type 425 (Material R
540 mm), length is 10.0 in. (253.9996 mm), a ef. C10-210). Examine the tape at "A" check. Rep
nd width is 0.10 in. (2.5400 mm). A maximum lace tape if it is loose. Do a permanent repair at
of 10 gouges and 10 scratches on a fan-cowl d "C" check.
oor are allowed.
C.Nick The maximum limit in one direction is 10.0 in. Apply Aerodynamic tape 3M type 425 (Material R
(253.9996 mm). A maximum of 14 nicks on a ef. C10-210). Examine the tape at "A" check. Rep
fan-cowl door is allowed. lace tape if it is loose. Do a permanent repair at
"C" check.
2.Location D2
A.Abrasion Refer to Para. 1.A.
B.Crack The minimum length of a crack in the fore and Apply Aerodynamic tape 3M type 425 (Material R
aft directions is 0.25 in. (6.3500 mm). The mi ef. C10-210). Examine the tape at "A" check. Rep
nimum distance between two cracks is 10.0 in. lace the tape if it is loose. Do a permanent repair
(253.9996 mm). A maximum of five cracks on at "C" check.
a fan-cowl door is allowed. Cracks that are wid
er than 0.10 in. (2.5400 mm) now become hol
es. (Refer to Para. 4.G.) Cracks that are 0.010
in. (0.2540 mm) deep or less now become scr
atches (Refer to Para. 1.B.) One crack that en
ds between two adjacent fasteners in a joint of
10 or more fasteners is allowed.
C.Disbond The maximum length of a disbond is 0.75 in. Examine at "A" check. Do a permanent repair at
(19.0500 mm) and the maximum width is 0.2 "C" check.
5 in. (6.3500 mm). The minimum distance bet
ween two disbonds is 10.0 in. (253.9996 m
m). A maximum of 5 disbonds is allowed on a
fan-cowl door.
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

4/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

INSPECT/CHECK MAXIMUM SERVICEABLE LIMITS REMARK


D.Scratch/Gouge Refer to Para. 1.B.
E.Nick Refer to Para 1.C.
3.Location D3
A.Abrasion Refer to Para. 1.A.
B.Nick Refer to Para. 1.C.
4.Location D4
A.Abrasion Refer to Para 1.A.
B.Cracks Refer to Para. 2.B. The maximum length of a c
rack in a circular direction is 1.0 in. (25.4000
mm).
C.Disbond Refer to Para. 2.C. The maximum length is 3.0
in. (76.1999 mm).
D.Dent The maximum diameter of a dent is 12.0 in. See Ref. SRM 54-20-00 allowable damages for de
(304.7995 mm) with no torn fibers or disbond tails.
s. The surface of a dent must be smooth with
no sharp edges.
E.Scratch/Gouge Refer to Para. 1.B.
F.Nick Refer to Para. 1.C..
G.Hole The maximum diameter of a hole is 3.0 in. (7 Apply Aerodynamic tape 3M type 425 (Material R
6.1999 mm). ef. C10-210). Examine the tape at "A" check. Rep
lace the tape if it is loose. Do a permanent repair
at "C" check.
5.Location D5
A.Abrasion Refer to Para. 1.A.
B.Crack Refer to Para. 2.B.
C.Scratch/Gouge Refer to Para. 1.B.
D.Nick Refer to Para. 1.C.
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

5/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

INSPECT/CHECK MAXIMUM SERVICEABLE LIMITS REMARK


E.Hole The maximum diameter is 1.0 in. (25.4000 m Apply Aerodynamic tape 3M type 425 (Material R
m). ef. C10-210). Examine the tape at "A" check. Rep
lace the tape if it is loose. Do a permanent repair
at "C" check.
6.Location D6
A.Abrasion Unlimited
B.Crack Unlimited
C.Disbond Unlimited
D.Dent Unlimited
E.Scratch/Gouge Unlimited
F.Nick Unlimited
G.Hole None allowed
H.Test Door must open and close without binding and Do a test for door operation Ref. AMM TASK 71-1
must make a continuous surface with all adjac 3-44-200-801.
ent surfaces when closed.

5. Close-up
SUBTASK 71-13-41-865-058-A
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL DESIGNATION FIN LOCATION


FOR FIN 4030EM1(DEMOUNTABLE POWER PLANT, ENG1)
722VU FADEC B ENG 1 13KS1 D44
742VU FADEC A ENG 1 12KS1 Q73
FOR FIN 4030EM2(DEMOUNTABLE POWER PLANT, ENG2)
722VU FADEC B ENG 2 13KS2 K49
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

6/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

PANEL DESIGNATION FIN LOCATION


742VU FADEC A ENG 2 12KS2 Q74

SUBTASK 71-13-41-410-054-A
B. Close Access
(1) Close the protective door of the AC/DC emergency power center 740VU.
(2) Close the access door 811.
(3) Remove the access platform(s).

SUBTASK 71-13-41-862-053-A
C. De-energize the ground service network
Ref. AMM TASK 24-42-00-862-801.

© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

7/8
4/28/22, 10:01 AM THY - A330 - AMM - FSN: 501 - 01-Apr-2022 - 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE


THY A330 A340 AMM 01-Apr-2022 65 71-13-41-210-801-A - Visual Inspection of the Fan Cowl Doors
TAIL NUMBER - MSN - FSN: TC-JNS - 01458 - 501
Print date: 2022-04-28 09:01:35

ZONE D1

HINGE FITTING
(TYPICAL 3 PLACES)
EDGE
ZONE D2
DOOR LAND
ZONE D5 5.0 in
A A (127 mm)

ZONE D4

ZONE D3

3.0 in 3.0 in
(76.20 mm) (76.20 mm)

3.0 in ZONE D3
(76.20 mm)

ZONE D6
3.0 in
(76.20 mm)

EDGE
ZONE D2
3.0 in
(76.20 mm)

3.0 in
(76.20 mm)
ZONE D3
3.0 in
(76.20 mm)
SECTION
5.0 in
A-A (127 mm)
DOOR EDGE
(TYPICAL FORWARD AND AFT)
ZONE D2
VIEW LOOKING OUTBOARD
LH FAN COWL DOOR SHOWN, RH SIMILAR
CES-132-02

DOOR LANDS
(TYPICAL FORWARD AND AFT)
ZONE D5
F_MM_711341_6_RAM0_01_01

Figure 71-13-41-991-00400-11-A (SHEET 1) - Fan Cowl Door


** ON A/C FSN 201-250, 501-510, 512-600, 702-750

© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.

8/8

You might also like