Professional Documents
Culture Documents
Steel Wires
Stainless Steel Wire Bright Annealed For Hose Braiding, Weaving, Knitting Etc.
KEI Industries Limited an ISO 9001:2015, ISO 14001:2015, OHSAS: 18001:2007 accredited company, started
production of Stainless Steel Wires in 1994. Since its beginning KEI has used state-of-the-art technology
with strong emphasis on product quality and customer satisfaction. As a result of continuous improvement
in every aspect of business within a short span of time, KEI has become one of the leading manufacturers &
exporters of Stainless Steel Wires in Northern India. Continuous product innovation with regular upgradation
of product process has earned KEI a reputed name in the domestic and international market. KEI exports its
products to various countries like United Kingdom, USA, Mexico, European Countries, Africa, Australia and the
far east.
KEI’s Stainless Steel Wire division has a manufacturing capacity of 7200 Mt per year ranging from wire diameter
6.00 mm to 0.10 mm in various grades like AISI 304, 304L, 316, 316L, 302, 321, 304HQ, 302CHQ, 430,
434 and Electrodes grades AWS 308L, 309L, 316L, 310, 312, 430L. These wires are available with different
properties such as soft, quarter hard, half hard, ¾ hard, full hard, depending upon its final application, and
surface finishes such as bright, matt, coated, decoated and as per customer’s specification.
STAINLESS STEEL WIRES FOR WEAVING, HOSES, BRAIDING, FILTERS, FENCING, KNITTING, CONVEYOR BELT,
REDRAWING WIRE, etc.
KEI has the ability to manufacture wire in various applications and achieve mechanical properties, to
customer’s application. The grades suitable for these applications are 304, 304L, 316, 316L. The surface
finish of wires can be bright or matt finished and high resistance to corrosion. Having regular winding pitch
and tension, they are manufactured under strict process control.
MECHANICAL PROPERTIES
DIAMETER TOLERANCES
0.60 - 1.40 +/- 0.01 1/8 & 1/4 hard 80 kgs max
1.50 - 6.00 +/- 0.025 1/8 & 1/4 hard 300 kgs max
d1 60
d2
MECHANICAL PROPERTIES
Wire Dia Coil Diameter Coil Wt. Surface Total Ht Total Wt.
Range in inches (Kgs.) Finish Formers+ on Formers
(mm) ID OD Min Max Pallets (Kgs.)
(inches)
A B C D E F G H
560 350 300 24 45 220 20 200 kg.
760 430 280 40 40 220 20 300 kg.
+/-5 +/-3 +/-3 +/-1 +/-2 +/-2 +/-1
E
G
G
A B A
316L (including ER316LSi) filler metal should be used with 316L and 316 base metals. CF-8M and CF-3M are
the cast equivalents of 316 and 316L, respectively.
Use 309L (including ER309LSi) when joining mild steel or low alloy steel to stainless steels, for joining
dissimilar stainless steels such as 409 to itself or to 304L stainless, as well as for joining 309 base metal. CG-
12 is the cast equivalent of 309. Some 308L applications may be substituted with 309L filler metal, but 316L
or 316 applications generally require Molybdenum and 309L contains no Molybdenum.
Type 430 stainless steel filler metal is ideal for 430 base materials because it matches these stabilized
grades. CF-8C is the cast equivalent of 430. Type 430 filler metal is also suitable for most 308L filler metal
applications.
SPECIAL CHARACTERISTICS
With excellent corrosion resistance and mechanical
strength, it is the most suitable material for bolts,
screws and other fasteners and has marked work
hardening characteristics.
SUPPLY CONDITIONS
KEI wires are coated to ensure smooth heading
operation conditions. Cold drawn and Annealed, Cold
drawn, Annealed and skin pass or as per customer’s
requirement with very fine tolerance.
MECHANICAL PROPERTIES
Annealed finish Light drawn
Type Grade Tensile Strength Elongation Tensile Strength Elongation
N/mm2 (Kgf/mm2) (%) N/mm2 (Kgf/mm2) (%)
AISI 590-740 650-800
40 over 20
304/316 (60-75) (66-81)
Austenite
AISI 440-590 460-640
40 over 20
302HQ (45-60) (47-65)
AISI 390-540 460-640
Ferrite 20 over 5
430 (40-55) (47-65)
MECHANICAL PROPERTIES
Dia (mm) Tolerance (mm) Ovality (mm)
MECHANICAL PROPERTIES
Type Grade Diameter Surface Finish
AISI 304
1.50 & Above De-coated wire
Austenite AISI 302HQ
or stearate coated
AISI 316 1.50 & Above
0.80- 1.60 Bright finish
Ferrite AISI 430
1.70 & Above Matt finish
SPRING WIRES
KEI’s Stainless Steel
Wire for Springs are
manufactured having
excellent mechanical
properties (surface, cast Table 1- Tolerances on diameter
& helix) manufactured
under strict guidance of technical personnel. The Nominal Dia of wire d Tolerance on diameter
diameter ranges from 0.19 mm to 1.20 mm in bright mm mm
finish and 0.50 mm to 6.0mm in matt finish (coated) 0.2 < d < 0.4 +0.01
in grade of AISI 302, 304 & 316, 321, Standard ASTM
0.4 < d < 0.6 +0.015
A313 and others.
0.8 < d < 0.1 +0.02
ROPE WIRES 1<d<6 +0.02
KEI’s Stainless Steel Wire for Rope Wires are 1.6 < d < 2.4 +0.03
manufactured having excellent mechanical 2.4 < d < 3.7 +0.03
properties, under strict guidance of technical 3.7 < d < 5.2 +0.04
personnel. The diameter ranges from 0.19 mm to 5.2 < d < 6 +0.05
1.20mm in bright finish and 0.50 mm to 6.00 mm in
matt finish (de-coated) in grade of AISI 304, 316, 321
rope specs. Table 2 – Tolerances on tensile grade
Nominal Dia of wire Tolerance on tensile
STAINLESS STEEL WIRE FOR SPRINGS HAS d grade
FOLLOWING CHARACTERISTICS
mm mm
• Excellent Surface Finish
0.2 < d < 0.5 390
• High Corrosion Resistance
0.5 < d < 1 350
• Superior Coiling Efficiency
1 < d < 1.5 320
• High Fatigue Strength
1.5 < d < 2 290
Stainless Steel Wire for Spring is made from the 2<d 260
selected steel. In particular to provide optimum
Note: Other tensile grades may be used on agreement
spring efficiency, this type of wire is meticulously
between the manufacturer and the supplier.
finished to eliminate flaws.
10
MECHANICAL PROPERTIES
DIN Nominal Wt. Barrel Dia (mm) Bore Dia (mm) Overall Width (mm)
0.40 – 0.85 300 300 – 450 90 under
0.90 – 1.40 400 400 – 600 100 under
1.50 – 6.00 600 600 – 900 100 under
11
PRODUCT RANGE
Stainless Steel Wires are used in Engineering, Chemical, Construction and many other industries besides
various types of application in manufacturing of KITCHEN WARES, ORNAMENTS, UTENSILS, WALL TIE/TYING
WIRES. Stainless Steel Wires at KEI are manufactured as per INTERNATIONAL STANDARDS as well as in
accordance with customer’s specifications.
SPECIAL CHARACTERISTICS
CHEMICAL COMPOSITION
Available in complete range of Stainless Steel as
per AISI, DIN, JIS and BS standards.
12
MECHANICAL PROPERTIES ALONG WITH PACKING DETAILS SPECIFICATION FOR 1/8, 1/4, 1/2, 3/4 HARD
TEMPER WIRES
MECHANICAL PROPERTIES
Temper Wire dia Coil dia Coil Surface Total Wt.
range Weight Finish on
Former
mm ID OD kg kg
KSI Max. 18-22 25-30 250-400 Bright / Matt 1000
4.50-6.00 18-22 25-30 100-200 Stearate coated 1000
4.50-6.00 18-22 25-30 100-200 Matt (clean) 1000
4.50-6.00 18-22 25-30 250-400 Bright 1000
2.00-4.50 18-22 25-30 100-200 Stearate Coated 1000
1/8 hard
2.00-4.50 18-22 25-30 100-200 Matt (clean) 1000
130
2.00-4.50 18-22 25-30 250-400 Bright 1000
1.50-2.00 18-22 25-30 100-200 Stearate Coated 1000
1.50-2.00 18-22 25-30 100-200 Matt (clean) 1000
1.50-2.00 18-22 25-30 250-400 Bright 1000
0.90-1.40 14-16 19-22 50-100 Stearate Coated 500
0.90-1.25 14-16 19-22 50-100 Matt (clean) 500
0.90-1.40 14-16 19-22 50-100 Bright 500
4.50-6.00 18-22 25-30 100-200 Stearate coated 1000
4.50-6.00 18-22 25-30 100-200 Matt (clean) 1000
4.50-6.00 18-22 25-30 250-400 Bright 1000
2.00-4.50 18-22 25-30 100-200 Stearate Coated 1000
1/4 hard 2.00-4.50 18-22 25-30 100-200 Matt (clean) 1000
160 2.00-4.50 18-22 25-30 250-400 Bright 1000
KSI Max. 1.50-2.00 18-22 25-30 100-200 Stearate Coated 1000
1.50-2.00 18-22 25-30 100-200 Matt (clean) 1000
1.50-2.00 18-22 25-30 250-400 Bright 1000
0.90-1.40 14-16 19-22 50-100 Stearate Coated 500
0.90-1.25 14-16 19-22 50-100 Matt (clean) 500
0.90-1.25 14-16 19-22 50-100 Bright 500
13
CHEMICAL COMPOSITION
For different applications and products, different grades of stainless steel is used. KEI Industries keeps a very
strict check on the chemical composition of its raw materials to reassure its customer’s needs. The standard
chemical composition of some grades of Stainless Steel offered by KEI Industries is given below.
TYPE
C Mn P S Si
AISI Cr Ni Cu Mo
Max Max Max Max Max
% % % % % % % % %
202 0.15 7.5-10.0 0.06 0.03 1.00 17-19 4-6 — —
204Cu 0.15 6.5-9.0 0.06 0.03 1.00 15.5-17.5 1.5-3.5 2-4 1.00
302 012 2.00 0.045 0.030 1.00 17.0/19.0 8.0/10.0 — —
302HQ 0.03 2.00 0.045 0.030 1.00 17.0/19.0 9.0/10.0 3.0/4.0 —
303 0.12 2.00 0.200 0.15/0.35 1.00 17.0/19.0 8.0/10.0 — —
304 0.08 2.00 0.045 0.030 1.00 18.0/20.0 8.0/10.0 — —
304Cu 0.08 2.00 0.045 0.03 1.00 17-19 8-10 3-4 —
304L 0.03 2.00 0.045 0.030 1.00 18.0/20.0 8.0/12.0 — —
316 0.08 2.00
0.045 0.030 1.00 16.0/18.0 10.0/14.0 — 2.0/3.0
14
— — — 1.4337 — — — —
— — — — — 316S92 — —
— — — 1.4430 — — Z2CND 19-13 —
— — — 1.4016 SUS430 430S17 Z8C17 X8Cr17
CONVERSION TABLE
1. 1.0 Inch = 2.54 cm = 25.4 mm
2. 1.0 Meter = 1.0936 Yards = 3.2808 Feet
3. 1.0 Yard = 3.0 Feet
4. 1.0 Kilogram = 2.2046 Lbm (Pound Mass)
15
VEB WERKZUGMASCHINENKOMBINANT,
GERMANY
This is a harmless testing used for checking
the hardness level in thick wire and the
critical machine part, which indirectly
contributes to the quality of finished
product and efficiency of machines.
SETERO MICROSCOPE
For studying the wire surface and various levels (raw material, intermediate and finished wire).
All these machines are complemented by well trained and qualified manpower to ensure the implementation
of quality policy in product.
16