Professional Documents
Culture Documents
V-Series
CONTURA II, III SWITCHES
The V-Series Contura II & III snap-in rocker switches offer countless unique options including choices for
ratings, circuits, colors, illuminations and symbols. These single or double pole switches feature removable
actuators in a choice of actuator styles and colors, and can be illuminated with either square or bar shaped lenses.
Actuators may be purchased and stocked separately. An optional plug-in terminal connector enables pre-wiring
of wire harnesses.
The Contura switches with sealed option, are certified to IP66/68, signifying complete protection against dust
and prolonged spray and submersion under pressure, and are recognized to UL1500 - Ignition Protection
for Marine Products. These switches are vibration, shock, thermoshock, moisture and salt spray resistant.
Temperature ratings range from -40°C to +85°C.
Resources:
Download 3D CAD Files
IGS STP
V-Series Switch
DESIGN FEATURES
OPTIONAL PANEL SEAL MULTIPLE LIGHTING OPTIONS BRASS ROLLER PIN SILVER PLATED BUTT
Helps prevent water/dust In addition to Incandescent Robust mechanism CONTACT MECHANISM
ingress behind panel. lamps, our LED illumination is eliminates the need for Providing 50k to 100k
offered in a wide array of light lubricants. Enables switch electrical cycles and
intensities, colors, as well as to withstand -40°C to a variety of different
dual level, tri-color, and flashing +85°C temperatures. electrical ratings.
options.
*Manufacturer reserves the right to change product specification without prior notice.
Contura IV Contura XI
The Contura IV’s “Shape to create The raised bracket/bezel on the
a Shape” actuator works with the Contura XI helps prevent inadvertent
curves, contours & advanced styling actuation of the rocker, as well as
of the latest panel designs, flowing preventing debris from being trapped
with these advanced curves & radii. under the actuator. This convex style
This actuator style fits on the Contura rocker is available with a wide variety
flush bracket/bezel. of lenses and legends.
V 1 D A B T 0 B A R B 00 0 00
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Series Circuit Rating Termination Illumination Lamp Lamp Bracket Actuator Lens Color Legend Legend Actuator
Orientation Lens Legend
13 LEGEND ORIENTATION
5 ILLUMINATION 0 No legend (used with codes 11-18 in selection 12)
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 1 Orientation 1
3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED 2 Orientation 2
lamps only 3 Orientation 3
Sealed Unsealed Lamps Illumination Type Lamp wired to Terminals 4 Orientation 4
S 0 NONE – –
A 1 1 INDEPENDENT 8 (+) 7 (–)
B 2 1 DOWN 3 (+) 7 (–)
C 3 2 UP 3 (+) 7 (–) 1 2 3 4
D 4 1 DOWN 3 (+) 7 (–)
2 DOWN 1 (+) 7 (–)
E 5 1 UP 1 (+) 7 (–)
2 UP 3 (+) 7 (–) 14 ACTUATOR LENS LEGEND
F 6 1 INDEPENDENT 8 (+) 7 (–) 00 No legend this location / no actuator
2 UP 3 (+) 6 (–) (used with codes 11-18 in selection 12) Selection 14 required when switch
G 7 1 INDEPENDENT 8 (+) 7 (–) requires two legends. If the two legends consist of one lens and one
2 UP 3 (+) 7 (–) body legend, lens legend must be specified in selection 12; body legend
specified in selection 14.
H Z 2 INDEPENDENT 8 (+) 7 (–) For legend options & codes, visit us at www.carlingtech.com.
U Y 1 INDEPENDENT 8 (+) 7 (–)
2 INDEPENDENT 10 (+) 9 (–) Notes:
SINGLE POLE SWITCHES ONLY Consult factory to verify horsepower rating for your particular circuit choice.
J 8 1 DOWN 3 (+) 8 (–) 1 Custom colors are available. Consult factory.
2 INDEPENDENT 6 (+) 7 (–) 2 Body legends not available on Soft surface actuators; White imprinting is standard
K W 1 INDEPENDENT 8 (+) 7 (–) on black actuators; Black imprinting is standard on white, red and gray actuators.
2 INDEPENDENT 6 (+) 7 (–) Custom colors are available, consult factory.
DOUBLE POLE SWITCHES ONLY 3 Additional ratings available. See V-Series Switch Accessories page.
L 9 1 DOWN 3 (+) 6 (–) 4 Contura II available with two square lenses. Consult factory for details.
M R 1 UP 3 (+) 6 (–)
N T 1 DOWN 3 (+) 6 (–)
2 DOWN 1 (+) 4 (–)
P V 1 UP 1 (+) 4 (–)
2 UP 3 (+) 6 (–)
V 1 D A S W 0 B A Z E 00 0
1 2 3 4 5 6 7 8 9 10 11 12 13
Series Circuit Rating Termination Illumination Lock Lamp Bracket Actuator Lens Function Legend Legend
Orientation
1 SERIES 7 LAMP
V Lamp above terminals 3 & 6 end of switch
No lamp 0
Neon 1 125VAC 2 250VAC
2 CIRCUIT Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V
Terminal Connections as viewed ( ) - momentary LED* superbright superbright
Red Amber Green Red
from bottom of switch: SP - single pole - uses terminals 1, 2 & 3. 2VDC A L F R
8 terminal 10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6. 6VDC B M G S
8 - - 7 8 - - 7 Terminals 7, 8, 9 & 10 for lamp circuit only. 12VDC C N H T
1 - - 4 1 - - 4 24VDC D P J V
2 - - 5 2 - - 5 * Consult factory for “daylight bright” LED options. Typical current draw for
3 - - 6 3 - - 6 LED is 20ma.
10 - - 9
Position: 1 2 3
SP DP 2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5 8 FLUSH BRACKET COLOR 1, PANEL SEAL
1 A ON NONE OFF Black White Gray
4 D ON NONE ON No Seal B W G
6 J ON OFF ON One Seal C Y H
7 K ON OFF (ON)
8 L (ON) OFF (ON)
9 N OFF NONE ON 9 HARD SURFACE ACTUATOR 1
SPECIAL CIRCUITS Black Gray Red White
H* 2 & 3 2 & 3, 5 & 4 5&4 Contura II A B G H
G* 2 & 3, 5 & 6 2 & 3 OFF
S* 2 & 3, 5 & 6 2 & 3 1&2 Contura III C D E F
M* (2 & 3, 5 & 6) 2 & 3 OFF
R* (2 & 3, 5 & 6) 2 & 3 2&1 Actuator orientation above terminals: 3,6 1,4
E* 5 & 6 5 & 3 5&1
*Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in
selection 4. External jumper between terminals 2 & 4 for circuit E are 10 LENS
provided by customer. Circuit E may be used for SP OFF-ON-ON circuit. Z - No Lens
Clear White Amber Green Red Blue
3 8 D J P V
3 RATING 4
1 .4VA @ 28VDC Resistive Lens color for LEDs must be clear, white, or match color of LED.
B 15A 24V Green or blue lenses are not recommended with Neon lamps.
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only) 11 ACTUATOR LOCK FUNCTION AND COLOR 1
F 10A 14V, 6A 14VT (circuit G only) Lock Color Up Down Up & Down Center 3
M .4VA/20A 12V Match Actuator A H R 1
N .4VA/15A 24V Black B J S 2
White C K T 3
Red D L V 4
4 TERMINATION / BASE STYLE Safety Orange E M W 5
8 term 10 Term Termination Jumper
1 2 .250 TAB (QC) no barriers No
A B .250 TAB (QC) with barriers No 12 ACTUATOR LENS OR BODY LEGEND 2
J K .250 TAB (QC) no barriers Yes T2 to 5 00 - No Legend
3 5 Solder Lug no barriers No 21 22 23 24
C D Solder Lug No
5 6 Wire Leads no barriers No OFF ON O I
E F Wire Leads No 25 O 26 O 27 O 28 I
Note: Codes J & K for circuits H, G & M. Do not use silicone based F N
lubricants to reduce terminal insertion forces during connector assembly, F
as it is detrimental to function and performance. For additional legend options & codes, visit us at www.carlingtech.com.
6 LOCK
Lock above terminals 1 & 4 end of switch
W lock
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1 Custom colors are available. Consult factory.
2 White imprinting is standard on black actuators; Black imprinting is standard on white,
red and gray actuators. Custom colors are available, consult factory.
3 Only available with 3 position circuits. Center OFF and special circuits only available
with center position lock function.
4 Additional ratings available. See V-Series Switch Accessories page.
Circuit Diagrams:
1 A J
2 2 5 2 5
3 3 6 1 3 4 6
2 B K
2 2 5 2 5
3 3 6 1 3 4 6
3 C L
2 2 5 2 5
1 3 1 3 4 6 3 6
4 D M
2 2 5 2 5
1 3 1 3 4 6 1 3 6
5 E R
2 2 5 2 5
1 3 1 3 4 6 1 3 6
6 F S
2 2 5 2 5
1 3 3 6
7 G
SYMBOL LEGEND
SYM. DEFINITION
2 2 5
DESIGNATES TERMINALS AND CONTACTS
1 3 3 4 DESIGNATES MAINTAINED CIRCUITS
DESIGNATES OTHER POSITION
+3 +8 +3 +3 -6 +8 +6
+3 +8 +1 +3 -4 -6 +8 +3
+1 +3 -8 +3 +6 +1 +3 -4 -6
-7 -7
+1 +3 +8 +6 +8 +10
-7 (-)7 -7 -9
1 3 17 18 10(-) 10(-) 1 3 17 18
J1 1 J5 2
2 5 8 2 5 8
11 13 3 14 17 18 10(-) 11 13 3 14 6
J2 1 JA
5 8 5
1 3 17 18 10(-)
11 13 3 14
J3 1
JJ
NOTE:
2 5 8 J circuits are available for all
non-locking V-Series styles.
Consult factory for partnumber details.
1 3 17 18 10(-) 11 13 3 14 15 12 6 16
SYMBOL LEGEND
J4 1
JK SYM. DEFINITION
DESIGNATES TERMINALS AND CONTACTS
2 5 DESIGNATES LAMP LOCATION
Reduce inventory levels and cost by stocking actuators and base switches separately.
Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes.
Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes.
Contura VI Actuator with lenses and inserts only: VV with code selections 9-16
Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes.
Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes.
Panel Seal: VPS
Contura X & XI actuators without lenses separately: Contura XII actuators without lenses separately:
1
VVR 6 1 00 1 2 3 4 5 1
VVP J 1 Z 21 1 00 2 3 4 5 6 7
Actuator Separately Actuator Lens Actuator Legend Actuator Style & Lens Lens Legend Legend Legend
Style/Color Opening Legend Orientation Color Opening Opening Orientation
VVL 2 1 00 0
3 Orientation 3
4 Orientation 4 1 2 3 4
1 2 3 4 5
Lens Separately Lens Lens Legend Legend
Contura X, XI & XII top piece of 2-piece lens separately: Style Color Orientation
actuator stem
posts mount toward actuator stem
top lens
bottom lens
} two piece
lens assembly
4 LENS OR BODY LEGEND 2
00 - No Legend 21 22 23 24
OFF ON O I
1 piece lens/bar lens are positioned the same as bottom lens for assembly,
minus the top lens. Lenses snap in from bottom. 25 O 26 O 27 O 28 I
F N
Notes: F
1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 For additional legend options & codes, visit us at www.carlingtech.com.
must be chosen.
2 Center of actuator marking not available for Contura XII.
3 Legend is not available for bar style lens.
4 Not recommended with neon lamps. 5 LEGEND ORIENTATION 3
5 Must also order top piece of 2 piece square lens separately. 0 No legend
1 Orientation 1
2 Orientation 2
3 Orientation 3
4 Orientation 4 1 2 3 4
Easily integrate Contura products into your system, with Contura Accessories
Q.C. SELECTION GUIDE
Contura Connectors
PART NO
WIRE
RANGE
COMPANY ORIEN-
SERIES Q.C.
PLAIN TIN GUIDE
SELECTION TATION
PLATED AWG MM 2
BRASS
BRASS WIRE (REF)
PART NO RANGE
02965580 12 3.0
COMPANY ORIEN-
02965471 TIN
SERIES
PACKARD
PLAIN
Q.C. Q.C.12010601
SELECTION
PLATED SELECTION
GUIDEQ.C. (2)16-14
GUIDE MM(2)1.0-2.0
AWGSELECTION TATION
2GUIDE
BRASS
02965470 16-14 (REF) 1.0-2.0 B
58 SERIES
PART NO
BRASS
PART NO
WIRE
PART NO
WIRE WIRE
02965469
02965580 06288318RANGE
12 20-18 ORIEN-
RANGE .5-.8 RANGE
3.0
COMPANY COMPANY COMPANY ORIEN- ORIEN-
SERIES SERIES
PLAIN TIN
SERIES
PLAIN TIN
12084590
PLAIN 102TIN TATION 5.0
2 TATION TATION
02965471 PLATED
12010601 AWG (2)16-14
PLATED MMAWG (2)1.0-2.0
PLATED MM
AWG MM 2
PACKARD BRASS BRASS12052224 BRASS (REF) TANG
02965470 BRASS BRASS 16-14 12BRASS 3.0
1.0-2.0(REF) B (REF)
58 SERIES
0296558012015870
02965580 16-14 1.0-2.0
PACKARD 02965469 06288318 1202965580
20-18 3.0 12
.5-.8 3.0 12 3.0
02965471 12010601 12010601
02965471 (2)16-14 12010601 (2)1.0-2.0
02965471(2)1.0-2.0
(2)16-14 (2)16-14 (2)1.0-2.0
METRI-PACKPACKARD 12020035
12084590 (2)22-18
10 1.0-2.0 (2).5-.8
5.0 B1.0-2.0 A
PACKARD 02965470 Q.C. SELECTION
PACKARD
02965470 16-14 GUIDE
02965470 16-14 16-14 B1.0-2.0 B
58630 SERIES58 SERIES
SERIES 58 SERIES TANG
12015832
02965469 06288318
0296546912015869
12052224 20-18
06288318
02965469 20-18
12 .5-.8 062883183.0 .5-.8
20-18
WIRE
.5-.8
20-18 .5-.8
PART NO
12052222
12015870
12084590 10 16-14 RANGE
12084590 20-22
5.0 10
12084590 1.0-2.05.0 .35-.5
10 5.0 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT
PACKARD COMPANY ORIEN-
12052224 TIN 12052224
12 (2)22-18 3.012052224
12 3.0 12 TANG TANG TANG
METRI-PACK SERIES PLAIN
Q.C.12020035
SELECTION AWG 16-12 MM
GUIDE (2).5-.8
2 1.3-3
TATION A 3.0
60253-1
BRASS PLATED
60253-2 SYMBOL
AMP
630PACKARD
SERIES
12015832
PACKARD
12015870 BRASS
12015869
PACKARD
12015870
16-14
20-18 (2)
12015870
1.0-2.0
16-14
16 (REF)
1.0-2.0
16-14
.5-.8 (2) 1.3
1.0-2.0
250 SERIES
METRI-PACK 12020035
METRI-PACK 02965580
METRI-PACK
PART NO (2)22-18
12020035 12
WIRE
(2).5-.8
(2)22-18
12020035
3.0 A(2).5-.8
(2)22-18 A(2).5-.8B A
FASTIN-FASTON
630 SERIES 630 SERIES
12015832 63012052222
42100-1 SERIES42100-2
12015869
12015832
20-22RANGE
12015869
20-18
12015832 18-14 .35-.5 20-18.8-2 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT
COMPANY 02965471 12010601 12015869
(2)16-14.5-.8
20-18
(2)1.0-2.0 .5-.8ORIEN- .5-.8
SERIES
PACKARD PLAIN TIN 16-12 1.3-3 TATION
60295-1
60253-1
58 SERIES
02965470 60295-2
12052222 PLATED
60253-2 20-22
12052222AWG 22-18
16-14.35-.5
20-22
12052222
MM
1.0-2.0 2 .35-.5.3-.9
20-22
B TANG .35-.5
SYMBOL =TANGSHOWS
SYMBOL SYMBOL
=TANG SYMBOL
ORIENTATION
SHOWS =
OFORIENTATION
TANG IN
SHOWS
SLOT
OFORIENTATION
TANG IN SLOT
OF TANG IN SLOT
AMP BRASS
02965469 BRASS 16-12 (2) 161.3-3
06288318 20-18 16-12 (2) 1.31.3-3
(REF)
.5-.8 16-12 1.3-3
250 SERIES
NOTE: 60253-1
AMPConsult Delphi
AMP Packard 60253-2
60253-1
and/or Amp
AMP 12084590 60253-2
60253-1
on actual part 60253-2
numbers and availability.
B (2) 1.3 SYMBOL SYMBOL SYMBOL
02965580 (2) 16 12
10 (2) 1.3
(2) 16 3.0
5.0 (2) 1.3
(2) 16
FASTIN-FASTON
250 SERIES
AMP is 250 42100-1 trademark
SERIES
a registered 42100-2
250 SERIES of AMP Inc. 18-14
Harrisburg, .8-2 B
PA B TANG B
42100-1 02965471
FASTIN-FASTON FASTIN-FASTON 12010601
12052224 (2)16-14
12 (2)1.0-2.0
3.0
Delphi Packard
PACKARD60295-1
42100-2
is a FASTIN-FASTON
42100-1
registered 18-14
42100-2
trademark
60295-2
42100-1
of
22-18
.8-218-14
42100-2
Delphi-Packard .8-218-14
.3-.9 Electrical Systems.8-2
Warren, Ohio
58 60295-1 02965470
SERIES
PACKARD 60295-2 12015870
60295-1 22-18
60295-216-14
16-14 .3-.9
60295-1 22-181.0-2.0
1.0-2.0
60295-2 .3-.9 B
22-18 .3-.9
METRI-PACK 02965469 06288318
12020035 20-18
(2)22-18 .5-.8
(2).5-.8 A
NOTE:
NOTE:Consult Delphi
NOTE:
630
Consult Delphi Packard
SERIES
Packard
Consult and/or
NOTE:
and/or
Delphi
Amp Amp
Packard
Consulton
on actual actual
and/or
Delphi
partAmp part
numbers
Packard
on numbers
actual
and/or
and part and
availability.
Amp
numbers availability.
on actual
and part
availability. .820[20.83]
numbers and availability.
AMP
AMP is a registered
is a .820[20.83]
registered
AMP
12015832
trademark
trademark
is a registered
of AMPAMP
12015869
12084590
oftrademark
AMP
Inc.
is Harrisburg,
a registered
AMP PA
20-18
10
Inc.ofHarrisburg,
trademark PA
Inc. Harrisburg,
.5-.8
5.0
of AMP PAInc. Harrisburg, PA
12052224
12052222 12of
20-22 3.0 of
.35-.5 TANG
Delphi
Delphi Packard
Packard is is a registered
Delphi
a registered
Packard is trademark
trademark
Delphi
a registered of Delphi-Packard
ofPackard
Delphi-Packard
trademark
is a registered
Electrical Electrical
Delphi-Packard
trademark
Systems Systems
Electrical
Warren, Ohio Warren,
Delphi-Packard
Systems TANGOhio
Electrical
Warren, Ohio
Systems
SYMBOL Warren,
= Ohio ORIENTATION OF TANG IN SLOT
SHOWS
12015870 16-14
16-12 1.0-2.0
1.3-3
PACKARD 60253-1 60253-2 SYMBOL
AMP 1.3 .820[20.83] .820[20.83] .820[20.83]
METRI-PACK
250.820[20.83]
SERIES .820[20.83]12020035 (2)22-18
(2) 16
.820[20.83] (2).5-.8
(2) A .820[20.83]
630 .820[20.83]
SERIES
FASTIN-FASTON 12015832
42100-1 12015869
42100-2 20-18
18-14 .5-.8
.8-2
B
.770[19.56]
60295-1 12052222
60295-2 20-22
22-18 .35-.5
.3-.9 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT
16-12 1.3-3
NOTE: AMP
Consult Delphi Packard
60253-1and/or60253-2
Amp on actual part numbers and availability. SYMBOL .770[19.56] .770[19.56] .770[19.56]
AMP is a registered trademark of AMP Inc. (2) 16 PA (2) 1.3
Harrisburg,
250 SERIES .770[19.56]
Delphi Packard is
FASTIN-FASTON a registered trademark
42100-1 42100-2 of Delphi-Packard
18-14 Electrical
.8-2 Systems B
Warren, Ohio
.920[23.37] .920[23.37] 1.170[29.72]
60295-1 60295-2 22-18 .3-.9 .820[20.83]
.920[23.37] .820[20.83]
.920[23.37] .920[23.37] .920[23.37] .920[23.37] .920[23.37] 1.170[29.72] 1.170[29.72] 1.170[29.72]
A
NOTE: Consult Delphi Packard and/or Amp on actual partAnumbers and availability. A A
AMP is a registered trademark of AMP Inc. Harrisburg, PA
A PACKARD 630 .920[23.37]
A
Delphi A A
PACKARD 630
VC1
A
VC1Packard is a registered trademark of Delphi-Packard
A
Electrical Systems .920[23.37]
Warren, VC2
Ohio A
VC2
A A A 1.170[29.72]
PACKARD 630
A A
PACKARD 630
VC2 VC2 VC2
.950[24.13]
PACKARD 630 PACKARD 630 PACKARD
PACKARD
630 630 PACKARD 630 PACKARD 630
PACKARD 630 PACKARD 630 PACKARDPACKARD
630 630 PACKARD 630 PACKARD 630
B VC1 VC1 VC1 VC1 VC1
B VC1 VC2 VC2 VC2 .770[19.56]
B B B B B B .820[20.83] .950[24.13] .950[24.13] .950[24.13]
A AMP, PACKARD 58 .820[20.83] AMP,
58 PACKARD
A
58 AMP AMP B AMP B A B B
B B A B
B
10 10
3 23 1VC1
28 10
1 38 2 1 784PACKARD 6729 417VC1
845 56 96 9 10 73 4 2 51 689 10 10
AMP, PACKARD 58 AMP, PACKARD 58 AMP, PACKARD
AMP, PACKARD
58 AMP, PACKARD 58 AMPAMP, PACKARD 58 AMP AMPAMP AMP
1053 630 3 3 2 128 1
7104 8 679 VC2
4 73 45 69
VC2 AMP, PACKARDPACKARD 630 AMP, 58
PACKARD 58AMP, PACKARD 58 PACKARD 630 58 AMP, PACKARD 58
3 5 2 619 8 7 4 5 15 8 6 9
AMP, PACKARD 58 58 AMP,
AMP,
PACKARD
PACKARD 58 AMP, PACKARD
PACKARD 630
2 3 2 1 8 7 3 4 235 1 62 8 1 87 4 5 6 7 4 5 6 7 4 5 6
B .920[23.37] B .920[23.37] 1.170[29.72] .950[24.13]
1.266[32.16] 1.266[32.16] 1.466[37.24]
1.266[32.16] 1.466[37.24] 1.466[37.24] 1.266[32.16]
1.266[32.16] 1.466[37.24]
1.266[32.16] 1.466[37.24] 1.466[37.24] 1.250[31.75] 1.250[31.75] 1.250[31.75]B
1.266[32.16]
AMP, PACKARD 58 AMP, PACKARD 58 1.266[32.16]
1.466[37.24] AMP 1.466[37.24] .770[19.56]
AMP 1.250[31.75] B
10MARKING
3 2 DETAIL
1A 8 MARKING DETAIL 7MARKING
MARKING
4DETAIL
PACKARD 630
5DETAIL
69 A
MARKING DETAIL MARKING
MARKING
10 3 VC22 1 DETAIL
DETAIL
DETAIL MARKING
PACKARD 630
8 7 4 5 6MARKING
MARKING DETAIL MARKING DETAIL
9 MARKING
DETAIL
DETAIL
AMP, PACKARD 58
3 2MARKING
MARKING DETAIL 1 8 DETAIL
MARKING
AMP, PACKARD 58
7 4
DETAIL MARKING DETAIL MARKING 5DETAIL
6
A
PACKARD 630
A
PACKARD 630
VC1 VC1 VC2
FRONT VIEWB
MARKING FRONT VIEW
DETAIL REARFRONT
VIEW VIEW REAR
MARKING B VIEW
DETAIL FRONT
REARVIEW
VIEW FRONT VIEW
MARKING FRONT
REAR VIEW
DETAIL VIEW REAR VIEWMARKING
FRONT
REAR VIEW .950[24.13]
VIEW
DETAIL FRONT VIEW REAR
FRONT
VIEW
MARKINGVIEW REAR VIEW
DETAIL REAR VIEW
MARKING DETAIL
1.266[32.16]
FRONT VIEW AMP, PACKARD 58 .920[23.37] 1.466[37.24]
REAR VIEW
AMP, PACKARD 58 AMP 1.266[32.16]
FRONT VIEW
.920[23.37] AMP 1.466[37.24]
REAR VIEW B
1.170[29.72] B 1.250[31.75]
FRONT VIEW REAR VIEW
VC1 10 3 2 1 VC18 7
VC14 5 69 10 3 2 1 8 VC2
VC2 7 VC2
4 5 69 3 VCH VCH VCH
AMP, PACKARD 58 AMP, PACKARD 58
2 1 8 7 4 5 6
CONNECTOR HOUSING
CONNECTOR HOUSING
CONNECTOR HOUSING CONNECTOR HOUSING
CONNECTOR HOUSINGCONNECTOR HOUSING CONNECTOR HOUSING
CONNECTOR HOUSING CONNECTOR HOUSING
MARKING DETAIL
VC1
A
1.266[32.16] MARKING DETAIL A
1.466[37.24] MARKING
1.266[32.16]
(For AMP terminals
(Foronly)
AMP
VC2
DETAIL
VC2
(For
terminals 1.466[37.24]
AMP terminals
only) MARKING DETAIL
only)
A
PACKARD 630
MARKING
1.250[31.75]
A
DETAIL VCH
PACKARD 630
MARKING DETAIL
FRONT VIEW
PACKARD 630
REAR VIEW VC1
PACKARD 630
FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW
CONNECTOR HOUSING
VC1 VC2
CONNECTOR
B HOUSING
MARKING DETAIL MARKING DETAIL
B
MARKING DETAIL MARKING DETAIL
.950[24.13]
MARKING DETAIL
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
AMP, PACKARD 58
REAR VIEW
AMP, PACKARD 58 (For AMP terminals only)
AMP
FRONT VIEW REAR VIEW AMP B
FRONT
PACKARDVIEW
B
REAR VIEW
VC1 10 3 2 1 8 7 4 5 69 10 3 2 1VC2 8 7 4 5 69 VCH
AMP, 58 AMP, PACKARD 58
3 2 1 8 7 4 5 6
CONNECTOR HOUSINGVC1
1.266[32.16] 1.466[37.24]
CONNECTOR
VC2
1.266[32.16]
HOUSING 1.466[37.24] VCH CONNECTOR
1.250[31.75] HOUSING
CONNECTOR HOUSING (For AMP HOUSING
CONNECTOR terminals only) CONNECTOR HOUSING
(For AMP terminals only)
MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL
TOP
TEST CUT
.830 [21.08] HOLE IN VHP
ACTUAL CONTURA II,III HOLE PLUG
MATERIAL
1.240 [31.50]
1.820 [46.23]
VHP
.430 [10.92] CONTURA II,III HOLE PLUG VH2
STANDARD HOLE PLUG
(With wing serrations)
VH1
STANDARD HOLE PLUG
2.000 [50.80] (No wing serrations)
(With VC1 connector attached)
1.067 [27.10]
DETAIL VIEW
VH3 VH4 VH1,VH3 & VH5
CONTURA IV HOLE PLUG CONTURA IV HOLE PLUG HOLE PLUGS
(No wing serrations) (With wing serrations) (No wing serrations
1.928 [48.97] for ease of removal)
1.020 [25.91]
DETAIL VIEW
VH5 VH6 VH2,VH4 & VH6
CONTURA V HOLE PLUG CONTURA V HOLE PLUG HOLE PLUGS
(No wing serrations) (With wing serrations) (With wing serrations)
CANADA
EUROPE
USA
MIDDLE
EAST
MEXICO
AFRICA ASIA-PACIFIC
OCEANIA
SOUTH
AMERICA
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Suite 1607, 16/F Tower 2, The Gateway,
Harbour City, 25 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332
Email: sales@carlingtech.com.hk
Germany: gmbh@carlingtech.com
France: sas@carlingtech.com
www.carlingtech.com REV_04_2018